Commit | Line | Data |
---|---|---|
fce152a6 | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
0b1115bc XZ |
2 | |
3 | /dts-v1/; | |
4 | ||
5 | #include "rk3288.dtsi" | |
6 | ||
7 | / { | |
8 | model = "Rockchip RK3288 Fennec Board"; | |
9 | compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; | |
10 | ||
0b639b81 | 11 | memory@0 { |
79db45be | 12 | reg = <0x0 0x0 0x0 0x80000000>; |
0b1115bc XZ |
13 | device_type = "memory"; |
14 | }; | |
15 | ||
16 | ext_gmac: external-gmac-clock { | |
17 | compatible = "fixed-clock"; | |
18 | #clock-cells = <0>; | |
19 | clock-frequency = <125000000>; | |
20 | clock-output-names = "ext_gmac"; | |
21 | }; | |
22 | ||
23 | vcc_sys: vsys-regulator { | |
24 | compatible = "regulator-fixed"; | |
25 | regulator-name = "vcc_sys"; | |
26 | regulator-min-microvolt = <5000000>; | |
27 | regulator-max-microvolt = <5000000>; | |
28 | regulator-always-on; | |
29 | regulator-boot-on; | |
30 | }; | |
31 | }; | |
32 | ||
33 | &cpu0 { | |
34 | cpu0-supply = <&vdd_cpu>; | |
35 | }; | |
36 | ||
37 | &emmc { | |
38 | bus-width = <8>; | |
39 | cap-mmc-highspeed; | |
40 | disable-wp; | |
41 | non-removable; | |
0b1115bc XZ |
42 | pinctrl-names = "default"; |
43 | pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; | |
44 | status = "okay"; | |
45 | }; | |
46 | ||
47 | &gmac { | |
48 | assigned-clocks = <&cru SCLK_MAC>; | |
49 | assigned-clock-parents = <&ext_gmac>; | |
50 | clock_in_out = "input"; | |
51 | pinctrl-names = "default"; | |
52 | pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; | |
53 | phy-supply = <&vcc_lan>; | |
54 | phy-mode = "rgmii"; | |
55 | snps,reset-active-low; | |
56 | snps,reset-delays-us = <0 10000 1000000>; | |
e9e79d53 | 57 | snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; |
0b1115bc XZ |
58 | tx_delay = <0x30>; |
59 | rx_delay = <0x10>; | |
60 | status = "okay"; | |
61 | }; | |
62 | ||
6a23afbf JC |
63 | &gpu { |
64 | mali-supply = <&vdd_gpu>; | |
65 | status = "okay"; | |
66 | }; | |
67 | ||
0b1115bc XZ |
68 | &hdmi { |
69 | status = "okay"; | |
70 | }; | |
71 | ||
72 | &i2c0 { | |
73 | status = "okay"; | |
74 | clock-frequency = <400000>; | |
75 | ||
76 | rk808: pmic@1b { | |
77 | compatible = "rockchip,rk808"; | |
78 | reg = <0x1b>; | |
79 | interrupt-parent = <&gpio0>; | |
e9e79d53 | 80 | interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; |
0b1115bc XZ |
81 | #clock-cells = <1>; |
82 | clock-output-names = "xin32k", "rk808-clkout2"; | |
83 | pinctrl-names = "default"; | |
84 | pinctrl-0 = <&pmic_int &global_pwroff>; | |
85 | rockchip,system-power-controller; | |
86 | wakeup-source; | |
87 | ||
88 | vcc1-supply = <&vcc_sys>; | |
89 | vcc2-supply = <&vcc_sys>; | |
90 | vcc3-supply = <&vcc_sys>; | |
91 | vcc4-supply = <&vcc_sys>; | |
92 | vcc6-supply = <&vcc_sys>; | |
93 | vcc7-supply = <&vcc_sys>; | |
94 | vcc8-supply = <&vcc_io>; | |
95 | vcc9-supply = <&vcc_io>; | |
96 | vcc10-supply = <&vcc_io>; | |
97 | vcc11-supply = <&vcc_io>; | |
98 | vcc12-supply = <&vcc_io>; | |
99 | vddio-supply = <&vcc_io>; | |
100 | ||
101 | regulators { | |
102 | vdd_cpu: DCDC_REG1 { | |
103 | regulator-always-on; | |
104 | regulator-boot-on; | |
105 | regulator-min-microvolt = <750000>; | |
106 | regulator-max-microvolt = <1350000>; | |
107 | regulator-name = "vdd_arm"; | |
108 | regulator-state-mem { | |
109 | regulator-off-in-suspend; | |
110 | }; | |
111 | }; | |
112 | ||
113 | vdd_gpu: DCDC_REG2 { | |
114 | regulator-always-on; | |
115 | regulator-boot-on; | |
116 | regulator-min-microvolt = <850000>; | |
117 | regulator-max-microvolt = <1250000>; | |
118 | regulator-name = "vdd_gpu"; | |
119 | regulator-state-mem { | |
120 | regulator-on-in-suspend; | |
121 | regulator-suspend-microvolt = <1000000>; | |
122 | }; | |
123 | }; | |
124 | ||
125 | vcc_ddr: DCDC_REG3 { | |
126 | regulator-always-on; | |
127 | regulator-boot-on; | |
128 | regulator-name = "vcc_ddr"; | |
129 | regulator-state-mem { | |
130 | regulator-on-in-suspend; | |
131 | }; | |
132 | }; | |
133 | ||
134 | vcc_io: DCDC_REG4 { | |
135 | regulator-always-on; | |
136 | regulator-boot-on; | |
137 | regulator-min-microvolt = <3300000>; | |
138 | regulator-max-microvolt = <3300000>; | |
139 | regulator-name = "vcc_io"; | |
140 | regulator-state-mem { | |
141 | regulator-on-in-suspend; | |
142 | regulator-suspend-microvolt = <3300000>; | |
143 | }; | |
144 | }; | |
145 | ||
146 | vccio_pmu: LDO_REG1 { | |
147 | regulator-always-on; | |
148 | regulator-boot-on; | |
149 | regulator-min-microvolt = <3300000>; | |
150 | regulator-max-microvolt = <3300000>; | |
151 | regulator-name = "vccio_pmu"; | |
152 | regulator-state-mem { | |
153 | regulator-on-in-suspend; | |
154 | regulator-suspend-microvolt = <3300000>; | |
155 | }; | |
156 | }; | |
157 | ||
158 | vcca_33: LDO_REG2 { | |
159 | regulator-always-on; | |
160 | regulator-boot-on; | |
161 | regulator-min-microvolt = <3300000>; | |
162 | regulator-max-microvolt = <3300000>; | |
163 | regulator-name = "vcca_33"; | |
164 | regulator-state-mem { | |
165 | regulator-off-in-suspend; | |
166 | }; | |
167 | }; | |
168 | ||
169 | vdd_10: LDO_REG3 { | |
170 | regulator-always-on; | |
171 | regulator-boot-on; | |
172 | regulator-min-microvolt = <1000000>; | |
173 | regulator-max-microvolt = <1000000>; | |
174 | regulator-name = "vdd_10"; | |
175 | regulator-state-mem { | |
176 | regulator-on-in-suspend; | |
177 | regulator-suspend-microvolt = <1000000>; | |
178 | }; | |
179 | }; | |
180 | ||
181 | vcc_wl: LDO_REG4 { | |
182 | regulator-always-on; | |
183 | regulator-boot-on; | |
184 | regulator-min-microvolt = <1800000>; | |
185 | regulator-max-microvolt = <1800000>; | |
186 | regulator-name = "vcc_wl"; | |
187 | regulator-state-mem { | |
188 | regulator-on-in-suspend; | |
189 | regulator-suspend-microvolt = <1800000>; | |
190 | }; | |
191 | }; | |
192 | ||
193 | vccio_sd: LDO_REG5 { | |
194 | regulator-always-on; | |
195 | regulator-boot-on; | |
196 | regulator-min-microvolt = <1800000>; | |
197 | regulator-max-microvolt = <3300000>; | |
198 | regulator-name = "vccio_sd"; | |
199 | regulator-state-mem { | |
200 | regulator-on-in-suspend; | |
201 | regulator-suspend-microvolt = <3300000>; | |
202 | }; | |
203 | }; | |
204 | ||
205 | vdd10_lcd: LDO_REG6 { | |
206 | regulator-always-on; | |
207 | regulator-boot-on; | |
208 | regulator-min-microvolt = <1000000>; | |
209 | regulator-max-microvolt = <1000000>; | |
210 | regulator-name = "vdd10_lcd"; | |
211 | regulator-state-mem { | |
212 | regulator-on-in-suspend; | |
213 | regulator-suspend-microvolt = <1000000>; | |
214 | }; | |
215 | }; | |
216 | ||
217 | vcc_18: LDO_REG7 { | |
218 | regulator-always-on; | |
219 | regulator-boot-on; | |
220 | regulator-min-microvolt = <1800000>; | |
221 | regulator-max-microvolt = <1800000>; | |
222 | regulator-name = "vcc_18"; | |
223 | regulator-state-mem { | |
224 | regulator-on-in-suspend; | |
225 | regulator-suspend-microvolt = <1800000>; | |
226 | }; | |
227 | }; | |
228 | ||
229 | vcc18_lcd: LDO_REG8 { | |
230 | regulator-always-on; | |
231 | regulator-boot-on; | |
232 | regulator-min-microvolt = <1800000>; | |
233 | regulator-max-microvolt = <1800000>; | |
234 | regulator-name = "vcc18_lcd"; | |
235 | regulator-state-mem { | |
236 | regulator-on-in-suspend; | |
237 | regulator-suspend-microvolt = <1800000>; | |
238 | }; | |
239 | }; | |
240 | ||
241 | vcc_sd: SWITCH_REG1 { | |
242 | regulator-always-on; | |
243 | regulator-boot-on; | |
244 | regulator-name = "vcc_sd"; | |
245 | regulator-state-mem { | |
246 | regulator-on-in-suspend; | |
247 | }; | |
248 | }; | |
249 | ||
250 | vcc_lan: SWITCH_REG2 { | |
251 | regulator-always-on; | |
252 | regulator-boot-on; | |
253 | regulator-name = "vcc_lan"; | |
254 | regulator-state-mem { | |
255 | regulator-on-in-suspend; | |
256 | }; | |
257 | }; | |
258 | }; | |
259 | }; | |
260 | }; | |
261 | ||
262 | &pinctrl { | |
263 | pcfg_output_high: pcfg-output-high { | |
264 | output-high; | |
265 | }; | |
266 | ||
267 | pcfg_output_low: pcfg-output-low { | |
268 | output-low; | |
269 | }; | |
270 | ||
271 | pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { | |
272 | drive-strength = <8>; | |
273 | }; | |
274 | ||
275 | pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { | |
276 | bias-pull-up; | |
277 | drive-strength = <8>; | |
278 | }; | |
279 | ||
280 | gmac { | |
281 | phy_int: phy-int { | |
282 | rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; | |
283 | }; | |
284 | ||
285 | phy_pmeb: phy-pmeb { | |
286 | rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; | |
287 | }; | |
288 | ||
289 | phy_rst: phy-rst { | |
290 | rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; | |
291 | }; | |
292 | }; | |
293 | ||
294 | pmic { | |
295 | pmic_int: pmic-int { | |
296 | rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; | |
297 | }; | |
298 | }; | |
299 | ||
300 | usbphy { | |
301 | host_drv: host-drv { | |
302 | rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; | |
303 | }; | |
304 | }; | |
305 | }; | |
306 | ||
307 | &uart2 { | |
308 | status = "okay"; | |
309 | }; | |
310 | ||
311 | &usbphy { | |
312 | pinctrl-names = "default"; | |
313 | pinctrl-0 = <&host_drv>; | |
e9e79d53 | 314 | vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
0b1115bc XZ |
315 | status = "okay"; |
316 | }; | |
317 | ||
318 | &usb_host0_ehci { | |
319 | status = "okay"; | |
320 | }; | |
321 | ||
322 | &usb_host1 { | |
323 | status = "okay"; | |
324 | }; | |
325 | ||
326 | &usb_otg { | |
327 | status = "okay"; | |
328 | }; | |
329 | ||
330 | &usb_hsic { | |
331 | status = "okay"; | |
332 | }; | |
333 | ||
334 | &vopb { | |
335 | status = "okay"; | |
336 | }; | |
337 | ||
338 | &vopb_mmu { | |
339 | status = "okay"; | |
340 | }; | |
341 | ||
342 | &vopl { | |
343 | status = "okay"; | |
344 | }; | |
345 | ||
346 | &vopl_mmu { | |
347 | status = "okay"; | |
348 | }; |