[linux-2.6-block.git] / arch / arm / boot / dts / r8a7791-koelsch.dts

/*
 * Device Tree Source for the Koelsch board
 *
 * Copyright (C) 2013 Renesas Electronics Corporation
 * Copyright (C) 2013-2014 Renesas Solutions Corp.
 * Copyright (C) 2014 Cogent Embedded, Inc.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

/*
 * SSI-AK4643
 *
 * SW1: 1: AK4643
 *      2: CN22
 *      3: ADV7511
 *
 * This command is required when Playback/Capture
 *
 *	amixer set "LINEOUT Mixer DACL" on
 *	amixer set "DVC Out" 100%
 *	amixer set "DVC In" 100%
 *
 * You can use Mute
 *
 *	amixer set "DVC Out Mute" on
 *	amixer set "DVC In Mute" on
 *
 * You can use Volume Ramp
 *
 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
 *	amixer set "DVC Out Ramp" on
 *	aplay xxx.wav &
 *	amixer set "DVC Out"  80%  // Volume Down
 *	amixer set "DVC Out" 100%  // Volume Up
 */

/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "Koelsch";
	compatible = "renesas,koelsch", "renesas,r8a7791";

	aliases {
		serial0 = &scif0;
		serial1 = &scif1;
		i2c9 = &gpioi2c1;
		i2c10 = &gpioi2c2;
		i2c11 = &gpioi2c4;
		i2c12 = &i2cexio1;
		i2c13 = &i2chdmi;
		i2c14 = &i2cexio4;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	memory@200000000 {
		device_type = "memory";
		reg = <2 0x00000000 0 0x40000000>;
	};

	lbsc {
		#address-cells = <1>;
		#size-cells = <1>;
	};

	keyboard {
		compatible = "gpio-keys";

		key-1 {
			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_1>;
			label = "SW2-1";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-2 {
			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_2>;
			label = "SW2-2";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-3 {
			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_3>;
			label = "SW2-3";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-4 {
			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_4>;
			label = "SW2-4";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-a {
			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_A>;
			label = "SW30";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-b {
			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_B>;
			label = "SW31";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-c {
			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_C>;
			label = "SW32";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-d {
			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_D>;
			label = "SW33";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-e {
			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_E>;
			label = "SW34";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-f {
			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_F>;
			label = "SW35";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-g {
			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_G>;
			label = "SW36";
			wakeup-source;
			debounce-interval = <20>;
		};
	};

	leds {
		compatible = "gpio-leds";
		led6 {
			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
			label = "LED6";
		};
		led7 {
			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
			label = "LED7";
		};
		led8 {
			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
			label = "LED8";
		};
	};

	vcc_sdhi0: regulator-vcc-sdhi0 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi0: regulator-vccq-sdhi0 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI0 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vcc_sdhi1: regulator-vcc-sdhi1 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI1 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi1: regulator-vccq-sdhi1 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI1 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vcc_sdhi2: regulator-vcc-sdhi2 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI2 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi2: regulator-vccq-sdhi2 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI2 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	audio_clock: audio_clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <11289600>;
	};

	rsnd_ak4643: sound {
		compatible = "simple-audio-card";

		simple-audio-card,format = "left_j";
		simple-audio-card,bitclock-master = <&sndcodec>;
		simple-audio-card,frame-master = <&sndcodec>;

		sndcpu: simple-audio-card,cpu {
			sound-dai = <&rcar_sound>;
		};

		sndcodec: simple-audio-card,codec {
			sound-dai = <&ak4643>;
			clocks = <&audio_clock>;
		};
	};

	hdmi-in {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&adv7612_in>;
			};
		};
	};

	cec_clock: cec-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <12000000>;
	};

	hdmi-out {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_out: endpoint {
				remote-endpoint = <&adv7511_out>;
			};
		};
	};

	x2_clk: x2-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <74250000>;
	};

	x13_clk: x13-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <148500000>;
	};

	gpioi2c1: i2c-9 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	gpioi2c2: i2c-10 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	gpioi2c4: i2c-11 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	/*
	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
	 * A fallback to GPIO is provided.
	 */
	i2cexio1: i2c-12 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c1>, <&gpioi2c1>;
		i2c-bus-name = "i2c-exio1";
		#address-cells = <1>;
		#size-cells = <0>;
	};

	/*
	 * A fallback to GPIO is provided for I2C2.
	 */
	i2chdmi: i2c-13 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c2>, <&gpioi2c2>;
		i2c-bus-name = "i2c-hdmi";
		#address-cells = <1>;
		#size-cells = <0>;

		ak4643: codec@12 {
			compatible = "asahi-kasei,ak4643";
			#sound-dai-cells = <0>;
			reg = <0x12>;
		};

		composite-in@20 {
			compatible = "adi,adv7180";
			reg = <0x20>;
			remote = <&vin1>;

			port {
				adv7180: endpoint {
					bus-width = <8>;
					remote-endpoint = <&vin1ep>;
				};
			};
		};

		hdmi@39 {
			compatible = "adi,adv7511w";
			reg = <0x39>;
			interrupt-parent = <&gpio3>;
			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
			clocks = <&cec_clock>;
			clock-names = "cec";

			adi,input-depth = <8>;
			adi,input-colorspace = "rgb";
			adi,input-clock = "1x";
			adi,input-style = <1>;
			adi,input-justification = "evenly";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7511_in: endpoint {
						remote-endpoint = <&du_out_rgb>;
					};
				};

				port@1 {
					reg = <1>;
					adv7511_out: endpoint {
						remote-endpoint = <&hdmi_con_out>;
					};
				};
			};
		};

		hdmi-in@4c {
			compatible = "adi,adv7612";
			reg = <0x4c>;
			interrupt-parent = <&gpio4>;
			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
			default-input = <0>;

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7612_in: endpoint {
						remote-endpoint = <&hdmi_con_in>;
					};
				};

				port@2 {
					reg = <2>;
					adv7612_out: endpoint {
						remote-endpoint = <&vin0ep2>;
					};
				};
			};
		};

		eeprom@50 {
			compatible = "renesas,r1ex24002", "atmel,24c02";
			reg = <0x50>;
			pagesize = <16>;
		};
	};

	/*
	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
	 * A fallback to GPIO is provided.
	 */
	i2cexio4: i2c-14 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c4>, <&gpioi2c4>;
		i2c-bus-name = "i2c-exio4";
		#address-cells = <1>;
		#size-cells = <0>;
	};
};

&du {
	pinctrl-0 = <&du_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
		 <&x13_clk>, <&x2_clk>;
	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";

	ports {
		port@0 {
			endpoint {
				remote-endpoint = <&adv7511_in>;
			};
		};
	};
};

&lvds0 {
	status = "okay";

	ports {
		port@1 {
			lvds_connector: endpoint {
			};
		};
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	i2c1_pins: i2c1 {
		groups = "i2c1";
		function = "i2c1";
	};

	i2c2_pins: i2c2 {
		groups = "i2c2";
		function = "i2c2";
	};

	i2c4_pins: i2c4 {
		groups = "i2c4_c";
		function = "i2c4";
	};

	du_pins: du {
		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
		function = "du";
	};

	scif0_pins: scif0 {
		groups = "scif0_data_d";
		function = "scif0";
	};

	scif1_pins: scif1 {
		groups = "scif1_data_d";
		function = "scif1";
	};

	scif_clk_pins: scif_clk {
		groups = "scif_clk";
		function = "scif_clk";
	};

	ether_pins: ether {
		groups = "eth_link", "eth_mdio", "eth_rmii";
		function = "eth";
	};

	phy1_pins: phy1 {
		groups = "intc_irq0";
		function = "intc";
	};

	sdhi0_pins: sd0 {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
		power-source = <3300>;
	};

	sdhi0_pins_uhs: sd0_uhs {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
		power-source = <1800>;
	};

	sdhi1_pins: sd1 {
		groups = "sdhi1_data4", "sdhi1_ctrl";
		function = "sdhi1";
		power-source = <3300>;
	};

	sdhi1_pins_uhs: sd1_uhs {
		groups = "sdhi1_data4", "sdhi1_ctrl";
		function = "sdhi1";
		power-source = <1800>;
	};

	sdhi2_pins: sd2 {
		groups = "sdhi2_data4", "sdhi2_ctrl";
		function = "sdhi2";
		power-source = <3300>;
	};

	sdhi2_pins_uhs: sd2_uhs {
		groups = "sdhi2_data4", "sdhi2_ctrl";
		function = "sdhi2";
		power-source = <1800>;
	};

	qspi_pins: qspi {
		groups = "qspi_ctrl", "qspi_data4";
		function = "qspi";
	};

	msiof0_pins: msiof0 {
		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
				 "msiof0_tx";
		function = "msiof0";
	};

	usb0_pins: usb0 {
		groups = "usb0";
		function = "usb0";
	};

	usb1_pins: usb1 {
		groups = "usb1";
		function = "usb1";
	};

	vin0_pins: vin0 {
		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
		function = "vin0";
	};

	vin1_pins: vin1 {
		groups = "vin1_data8", "vin1_clk";
		function = "vin1";
	};

	sound_pins: sound {
		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
		function = "ssi";
	};

	sound_clk_pins: sound_clk {
		groups = "audio_clk_a";
		function = "audio_clk";
	};
};

&ether {
	pinctrl-0 = <&ether_pins &phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
		interrupt-parent = <&irqc0>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		micrel,led-mode = <1>;
	};
};

&cmt0 {
	status = "okay";
};

&sata0 {
	status = "okay";
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif1 {
	pinctrl-0 = <&scif1_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif_clk {
	clock-frequency = <14745600>;
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-1 = <&sdhi0_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi0>;
	vqmmc-supply = <&vccq_sdhi0>;
	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	status = "okay";
};

&sdhi1 {
	pinctrl-0 = <&sdhi1_pins>;
	pinctrl-1 = <&sdhi1_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi1>;
	vqmmc-supply = <&vccq_sdhi1>;
	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
	sd-uhs-sdr50;
	status = "okay";
};

&sdhi2 {
	pinctrl-0 = <&sdhi2_pins>;
	pinctrl-1 = <&sdhi2_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi2>;
	vqmmc-supply = <&vccq_sdhi2>;
	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
	sd-uhs-sdr50;
	status = "okay";
};

&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash: flash@0 {
		compatible = "spansion,s25fl512s", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <30000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		spi-cpha;
		spi-cpol;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "loader";
				reg = <0x00000000 0x00080000>;
				read-only;
			};
			partition@80000 {
				label = "user";
				reg = <0x00080000 0x00580000>;
				read-only;
			};
			partition@600000 {
				label = "flash";
				reg = <0x00600000 0x03a00000>;
			};
		};
	};
};

&msiof0 {
	pinctrl-0 = <&msiof0_pins>;
	pinctrl-names = "default";

	status = "okay";

	pmic: pmic@0 {
		compatible = "renesas,r2a11302ft";
		reg = <0>;
		spi-max-frequency = <6000000>;
		spi-cpol;
		spi-cpha;
	};
};

&i2c1 {
	pinctrl-0 = <&i2c1_pins>;
	pinctrl-names = "i2c-exio1";
};

&i2c2 {
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "i2c-hdmi";

	clock-frequency = <100000>;
};

&i2c4 {
	pinctrl-0 = <&i2c4_pins>;
	pinctrl-names = "i2c-exio4";
};

&i2c6 {
	status = "okay";
	clock-frequency = <100000>;

	pmic@58 {
		compatible = "dlg,da9063";
		reg = <0x58>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;

		rtc {
			compatible = "dlg,da9063-rtc";
		};

		wdt {
			compatible = "dlg,da9063-watchdog";
		};
	};

	vdd_dvfs: regulator@68 {
		compatible = "dlg,da9210";
		reg = <0x68>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;

		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1000000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&pci0 {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
};

&pci1 {
	status = "okay";
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";
};

&hsusb {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
};

&usbphy {
	status = "okay";
};

&pcie_bus_clk {
	clock-frequency = <100000000>;
};

&pciec {
	status = "okay";
};

&cpu0 {
	cpu0-supply = <&vdd_dvfs>;
};

/* HDMI video input */
&vin0 {
	status = "okay";
	pinctrl-0 = <&vin0_pins>;
	pinctrl-names = "default";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		vin0ep2: endpoint {
			remote-endpoint = <&adv7612_out>;
			bus-width = <24>;
			hsync-active = <0>;
			vsync-active = <0>;
			pclk-sample = <1>;
			data-active = <1>;
		};
	};
};

/* composite video input */
&vin1 {
	status = "okay";
	pinctrl-0 = <&vin1_pins>;
	pinctrl-names = "default";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		vin1ep: endpoint {
			remote-endpoint = <&adv7180>;
			bus-width = <8>;
		};
	};
};

&rcar_sound {
	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	pinctrl-names = "default";

	/* Single DAI */
	#sound-dai-cells = <0>;

	status = "okay";

	rcar_sound,dai {
		dai0 {
			playback = <&ssi0 &src2 &dvc0>;
			capture  = <&ssi1 &src3 &dvc1>;
		};
	};
};

&ssi1 {
	shared-pin;
};
Commit	Line	Data
1f52c659 HN	1	/*
	2	* Device Tree Source for the Koelsch board
	3	*
	4	* Copyright (C) 2013 Renesas Electronics Corporation
08e8f0f3 SS	5	* Copyright (C) 2013-2014 Renesas Solutions Corp.
08e8f0f3 SS	6	* Copyright (C) 2014 Cogent Embedded, Inc.
1f52c659 HN	7	*
	8	* This file is licensed under the terms of the GNU General Public License
	9	* version 2. This program is licensed "as is" without any warranty of any
	10	* kind, whether express or implied.
	11	*/
	12
b160f615 KM	13	/*
	14	* SSI-AK4643
	15	*
	16	* SW1: 1: AK4643
	17	* 2: CN22
	18	* 3: ADV7511
	19	*
	20	* This command is required when Playback/Capture
	21	*
	22	* amixer set "LINEOUT Mixer DACL" on
5c6d4b94 KM	23	* amixer set "DVC Out" 100%
	24	* amixer set "DVC In" 100%
	25	*
	26	* You can use Mute
	27	*
	28	* amixer set "DVC Out Mute" on
	29	* amixer set "DVC In Mute" on
ce474816 KM	30	*
	31	* You can use Volume Ramp
	32	*
	33	* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
	34	* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
	35	* amixer set "DVC Out Ramp" on
	36	* aplay xxx.wav &
	37	* amixer set "DVC Out" 80% // Volume Down
	38	* amixer set "DVC Out" 100% // Volume Up
b160f615 KM	39	*/
b160f615 KM	40
1f52c659	41	/dts-v1/;
31c46cbf	42	#include "r8a7791.dtsi"
f8e2535d	43	#include <dt-bindings/gpio/gpio.h>
7f168b1e	44	#include <dt-bindings/input/input.h>
1f52c659 HN	45
	46	/ {
	47	model = "Koelsch";
	48	compatible = "renesas,koelsch", "renesas,r8a7791";
	49
5ba55fa8	50	aliases {
1f75cdac LP	51	serial0 = &scif0;
1f75cdac LP	52	serial1 = &scif1;
6723438b	53	i2c9 = &gpioi2c1;
168a7099	54	i2c10 = &gpioi2c2;
be93275c	55	i2c11 = &gpioi2c4;
6723438b	56	i2c12 = &i2cexio1;
168a7099	57	i2c13 = &i2chdmi;
be93275c	58	i2c14 = &i2cexio4;
5ba55fa8 LP	59	};
5ba55fa8 LP	60
1f52c659	61	chosen {
79e69d17	62	bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
832dae1f	63	stdout-path = "serial0:115200n8";
1f52c659 HN	64	};
	65
	66	memory@40000000 {
	67	device_type = "memory";
4cd1bad4 TY	68	reg = <0 0x40000000 0 0x40000000>;
	69	};
	70
	71	memory@200000000 {
	72	device_type = "memory";
	73	reg = <2 0x00000000 0 0x40000000>;
1f52c659 HN	74	};
	75
	76	lbsc {
	77	#address-cells = <1>;
	78	#size-cells = <1>;
	79	};
f8e2535d	80
d3aaec83	81	keyboard {
aff5274f LP	82	compatible = "gpio-keys";
aff5274f LP	83
7f168b1e MD	84	key-1 {
	85	gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
	86	linux,code = <KEY_1>;
	87	label = "SW2-1";
0cc16889	88	wakeup-source;
7f168b1e MD	89	debounce-interval = <20>;
	90	};
	91	key-2 {
	92	gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
	93	linux,code = <KEY_2>;
	94	label = "SW2-2";
0cc16889	95	wakeup-source;
7f168b1e MD	96	debounce-interval = <20>;
	97	};
	98	key-3 {
	99	gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
	100	linux,code = <KEY_3>;
	101	label = "SW2-3";
0cc16889	102	wakeup-source;
7f168b1e MD	103	debounce-interval = <20>;
	104	};
	105	key-4 {
	106	gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
	107	linux,code = <KEY_4>;
	108	label = "SW2-4";
0cc16889	109	wakeup-source;
7f168b1e MD	110	debounce-interval = <20>;
7f168b1e MD	111	};
aff5274f LP	112	key-a {
aff5274f LP	113	gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
7f168b1e	114	linux,code = <KEY_A>;
aff5274f	115	label = "SW30";
0cc16889	116	wakeup-source;
aff5274f LP	117	debounce-interval = <20>;
	118	};
	119	key-b {
	120	gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
7f168b1e	121	linux,code = <KEY_B>;
aff5274f	122	label = "SW31";
0cc16889	123	wakeup-source;
aff5274f LP	124	debounce-interval = <20>;
	125	};
	126	key-c {
	127	gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
7f168b1e	128	linux,code = <KEY_C>;
aff5274f	129	label = "SW32";
0cc16889	130	wakeup-source;
aff5274f LP	131	debounce-interval = <20>;
	132	};
	133	key-d {
	134	gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
7f168b1e	135	linux,code = <KEY_D>;
aff5274f	136	label = "SW33";
0cc16889	137	wakeup-source;
aff5274f LP	138	debounce-interval = <20>;
	139	};
	140	key-e {
	141	gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
7f168b1e	142	linux,code = <KEY_E>;
aff5274f	143	label = "SW34";
0cc16889	144	wakeup-source;
aff5274f LP	145	debounce-interval = <20>;
	146	};
	147	key-f {
	148	gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
7f168b1e	149	linux,code = <KEY_F>;
aff5274f	150	label = "SW35";
0cc16889	151	wakeup-source;
aff5274f LP	152	debounce-interval = <20>;
	153	};
	154	key-g {
	155	gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
7f168b1e	156	linux,code = <KEY_G>;
aff5274f	157	label = "SW36";
0cc16889	158	wakeup-source;
aff5274f LP	159	debounce-interval = <20>;
	160	};
	161	};
	162
f8e2535d LP	163	leds {
	164	compatible = "gpio-leds";
	165	led6 {
	166	gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
352faa5f	167	label = "LED6";
f8e2535d LP	168	};
	169	led7 {
	170	gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
352faa5f	171	label = "LED7";
f8e2535d LP	172	};
	173	led8 {
	174	gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
352faa5f	175	label = "LED8";
f8e2535d LP	176	};
f8e2535d LP	177	};
2c60a7df	178
a704b276	179	vcc_sdhi0: regulator-vcc-sdhi0 {
2c60a7df MD	180	compatible = "regulator-fixed";
	181
	182	regulator-name = "SDHI0 Vcc";
	183	regulator-min-microvolt = <3300000>;
	184	regulator-max-microvolt = <3300000>;
	185
	186	gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
	187	enable-active-high;
	188	};
	189
a704b276	190	vccq_sdhi0: regulator-vccq-sdhi0 {
2c60a7df MD	191	compatible = "regulator-gpio";
	192
	193	regulator-name = "SDHI0 VccQ";
	194	regulator-min-microvolt = <1800000>;
	195	regulator-max-microvolt = <3300000>;
	196
	197	gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
	198	gpios-states = <1>;
	199	states = <3300000 1
	200	1800000 0>;
	201	};
	202
a704b276	203	vcc_sdhi1: regulator-vcc-sdhi1 {
2c60a7df MD	204	compatible = "regulator-fixed";
	205
	206	regulator-name = "SDHI1 Vcc";
	207	regulator-min-microvolt = <3300000>;
	208	regulator-max-microvolt = <3300000>;
	209
	210	gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
	211	enable-active-high;
	212	};
	213
a704b276	214	vccq_sdhi1: regulator-vccq-sdhi1 {
2c60a7df MD	215	compatible = "regulator-gpio";
	216
	217	regulator-name = "SDHI1 VccQ";
	218	regulator-min-microvolt = <1800000>;
	219	regulator-max-microvolt = <3300000>;
	220
	221	gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
	222	gpios-states = <1>;
	223	states = <3300000 1
	224	1800000 0>;
	225	};
	226
a704b276	227	vcc_sdhi2: regulator-vcc-sdhi2 {
2c60a7df MD	228	compatible = "regulator-fixed";
	229
	230	regulator-name = "SDHI2 Vcc";
	231	regulator-min-microvolt = <3300000>;
	232	regulator-max-microvolt = <3300000>;
	233
	234	gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
	235	enable-active-high;
	236	};
	237
a704b276	238	vccq_sdhi2: regulator-vccq-sdhi2 {
2c60a7df MD	239	compatible = "regulator-gpio";
	240
	241	regulator-name = "SDHI2 VccQ";
	242	regulator-min-microvolt = <1800000>;
	243	regulator-max-microvolt = <3300000>;
	244
	245	gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
	246	gpios-states = <1>;
	247	states = <3300000 1
	248	1800000 0>;
	249	};
b160f615	250
62c7e9da	251	audio_clock: audio_clock {
c19c84ff KM	252	compatible = "fixed-clock";
	253	#clock-cells = <0>;
	254	clock-frequency = <11289600>;
c19c84ff KM	255	};
c19c84ff KM	256
18f88d22	257	rsnd_ak4643: sound {
b160f615 KM	258	compatible = "simple-audio-card";
	259
	260	simple-audio-card,format = "left_j";
	261	simple-audio-card,bitclock-master = <&sndcodec>;
	262	simple-audio-card,frame-master = <&sndcodec>;
	263
	264	sndcpu: simple-audio-card,cpu {
	265	sound-dai = <&rcar_sound>;
	266	};
	267
	268	sndcodec: simple-audio-card,codec {
	269	sound-dai = <&ak4643>;
c19c84ff	270	clocks = <&audio_clock>;
b160f615 KM	271	};
b160f615 KM	272	};
83a0731b	273
84e3a746 HV	274	hdmi-in {
	275	compatible = "hdmi-connector";
	276	type = "a";
	277
	278	port {
	279	hdmi_con_in: endpoint {
	280	remote-endpoint = <&adv7612_in>;
	281	};
	282	};
	283	};
	284
d72f4f03 SH	285	cec_clock: cec-clock {
	286	compatible = "fixed-clock";
	287	#clock-cells = <0>;
	288	clock-frequency = <12000000>;
	289	};
	290
83a0731b LP	291	hdmi-out {
	292	compatible = "hdmi-connector";
	293	type = "a";
	294
	295	port {
84e3a746	296	hdmi_con_out: endpoint {
83a0731b LP	297	remote-endpoint = <&adv7511_out>;
	298	};
	299	};
	300	};
cd21cb46 LP	301
	302	x2_clk: x2-clock {
	303	compatible = "fixed-clock";
	304	#clock-cells = <0>;
ebf06af5	305	clock-frequency = <74250000>;
cd21cb46 LP	306	};
	307
	308	x13_clk: x13-clock {
	309	compatible = "fixed-clock";
	310	#clock-cells = <0>;
	311	clock-frequency = <148500000>;
	312	};
6723438b SH	313
	314	gpioi2c1: i2c-9 {
	315	#address-cells = <1>;
	316	#size-cells = <0>;
	317	compatible = "i2c-gpio";
	318	status = "disabled";
c14f3ec4	319	scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
168a7099 WS	320	sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	321	i2c-gpio,delay-us = <5>;
	322	};
	323
	324	gpioi2c2: i2c-10 {
	325	#address-cells = <1>;
	326	#size-cells = <0>;
	327	compatible = "i2c-gpio";
	328	status = "disabled";
	329	scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	330	sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
6723438b SH	331	i2c-gpio,delay-us = <5>;
	332	};
	333
be93275c WS	334	gpioi2c4: i2c-11 {
	335	#address-cells = <1>;
	336	#size-cells = <0>;
	337	compatible = "i2c-gpio";
	338	status = "disabled";
	339	scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	340	sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	341	i2c-gpio,delay-us = <5>;
	342	};
	343
6723438b SH	344	/*
	345	* I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
	346	* A fallback to GPIO is provided.
	347	*/
	348	i2cexio1: i2c-12 {
	349	compatible = "i2c-demux-pinctrl";
	350	i2c-parent = <&i2c1>, <&gpioi2c1>;
	351	i2c-bus-name = "i2c-exio1";
	352	#address-cells = <1>;
	353	#size-cells = <0>;
	354	};
168a7099 WS	355
	356	/*
	357	* A fallback to GPIO is provided for I2C2.
	358	*/
	359	i2chdmi: i2c-13 {
	360	compatible = "i2c-demux-pinctrl";
	361	i2c-parent = <&i2c2>, <&gpioi2c2>;
	362	i2c-bus-name = "i2c-hdmi";
	363	#address-cells = <1>;
	364	#size-cells = <0>;
	365
	366	ak4643: codec@12 {
	367	compatible = "asahi-kasei,ak4643";
	368	#sound-dai-cells = <0>;
	369	reg = <0x12>;
	370	};
	371
	372	composite-in@20 {
	373	compatible = "adi,adv7180";
	374	reg = <0x20>;
	375	remote = <&vin1>;
	376
	377	port {
	378	adv7180: endpoint {
	379	bus-width = <8>;
	380	remote-endpoint = <&vin1ep>;
	381	};
	382	};
	383	};
	384
	385	hdmi@39 {
	386	compatible = "adi,adv7511w";
	387	reg = <0x39>;
	388	interrupt-parent = <&gpio3>;
	389	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
	390	clocks = <&cec_clock>;
	391	clock-names = "cec";
	392
	393	adi,input-depth = <8>;
	394	adi,input-colorspace = "rgb";
	395	adi,input-clock = "1x";
	396	adi,input-style = <1>;
	397	adi,input-justification = "evenly";
	398
	399	ports {
	400	#address-cells = <1>;
	401	#size-cells = <0>;
	402
	403	port@0 {
	404	reg = <0>;
	405	adv7511_in: endpoint {
	406	remote-endpoint = <&du_out_rgb>;
	407	};
	408	};
	409
	410	port@1 {
	411	reg = <1>;
	412	adv7511_out: endpoint {
	413	remote-endpoint = <&hdmi_con_out>;
	414	};
	415	};
	416	};
	417	};
	418
419	hdmi-in@4c {
420	compatible = "adi,adv7612";
421	reg = <0x4c>;
422	interrupt-parent = <&gpio4>;
423	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
424	default-input = <0>;
425
426	ports {
427	#address-cells = <1>;
428	#size-cells = <0>;
429
430	port@0 {
431	reg = <0>;
432	adv7612_in: endpoint {
433	remote-endpoint = <&hdmi_con_in>;
434	};
435	};
436
437	port@2 {
438	reg = <2>;
439	adv7612_out: endpoint {
440	remote-endpoint = <&vin0ep2>;
441	};
442	};
443	};
444	};
445
446	eeprom@50 {
447	compatible = "renesas,r1ex24002", "atmel,24c02";
448	reg = <0x50>;
449	pagesize = <16>;
450	};
451	};
be93275c WS	452
	453	/*
	454	* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
	455	* A fallback to GPIO is provided.
	456	*/
	457	i2cexio4: i2c-14 {
	458	compatible = "i2c-demux-pinctrl";
	459	i2c-parent = <&i2c4>, <&gpioi2c4>;
	460	i2c-bus-name = "i2c-exio4";
	461	#address-cells = <1>;
	462	#size-cells = <0>;
	463	};
f8e2535d LP	464	};
f8e2535d LP	465
0ee56d40 LP	466	&du {
	467	pinctrl-0 = <&du_pins>;
	468	pinctrl-names = "default";
	469	status = "okay";
	470
e5c3f470	471	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
cd21cb46	472	<&x13_clk>, <&x2_clk>;
e5c3f470	473	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
cd21cb46	474
0ee56d40	475	ports {
83a0731b LP	476	port@0 {
	477	endpoint {
	478	remote-endpoint = <&adv7511_in>;
	479	};
	480	};
e5c3f470 LP	481	};
	482	};
	483
	484	&lvds0 {
	485	status = "okay";
	486
	487	ports {
0ee56d40 LP	488	port@1 {
	489	lvds_connector: endpoint {
	490	};
	491	};
	492	};
	493	};
	494
fcf0c725 LP	495	&extal_clk {
	496	clock-frequency = <20000000>;
	497	};
	498
f8e2535d	499	&pfc {
338f7ebf GU	500	pinctrl-0 = <&scif_clk_pins>;
	501	pinctrl-names = "default";
	502
6723438b SH	503	i2c1_pins: i2c1 {
	504	groups = "i2c1";
	505	function = "i2c1";
	506	};
	507
e6a4c001	508	i2c2_pins: i2c2 {
fec7b9f8 SH	509	groups = "i2c2";
fec7b9f8 SH	510	function = "i2c2";
38c53516 WS	511	};
38c53516 WS	512
be93275c WS	513	i2c4_pins: i2c4 {
	514	groups = "i2c4_c";
	515	function = "i2c4";
	516	};
	517
afba941c	518	du_pins: du {
fec7b9f8 SH	519	groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
fec7b9f8 SH	520	function = "du";
afba941c LP	521	};
afba941c LP	522
b71b8346	523	scif0_pins: scif0 {
fec7b9f8 SH	524	groups = "scif0_data_d";
fec7b9f8 SH	525	function = "scif0";
f8e2535d LP	526	};
f8e2535d LP	527
b71b8346	528	scif1_pins: scif1 {
fec7b9f8 SH	529	groups = "scif1_data_d";
fec7b9f8 SH	530	function = "scif1";
f8e2535d	531	};
e02ee513	532
338f7ebf	533	scif_clk_pins: scif_clk {
fec7b9f8 SH	534	groups = "scif_clk";
fec7b9f8 SH	535	function = "scif_clk";
338f7ebf GU	536	};
338f7ebf GU	537
08e8f0f3	538	ether_pins: ether {
fec7b9f8 SH	539	groups = "eth_link", "eth_mdio", "eth_rmii";
fec7b9f8 SH	540	function = "eth";
08e8f0f3 SS	541	};
	542
	543	phy1_pins: phy1 {
fec7b9f8 SH	544	groups = "intc_irq0";
fec7b9f8 SH	545	function = "intc";
08e8f0f3 SS	546	};
08e8f0f3 SS	547
2c60a7df	548	sdhi0_pins: sd0 {
fec7b9f8 SH	549	groups = "sdhi0_data4", "sdhi0_ctrl";
fec7b9f8 SH	550	function = "sdhi0";
d3cec922 SH	551	power-source = <3300>;
	552	};
	553
	554	sdhi0_pins_uhs: sd0_uhs {
	555	groups = "sdhi0_data4", "sdhi0_ctrl";
	556	function = "sdhi0";
	557	power-source = <1800>;
2c60a7df MD	558	};
	559
	560	sdhi1_pins: sd1 {
fec7b9f8 SH	561	groups = "sdhi1_data4", "sdhi1_ctrl";
fec7b9f8 SH	562	function = "sdhi1";
d3cec922 SH	563	power-source = <3300>;
	564	};
	565
	566	sdhi1_pins_uhs: sd1_uhs {
	567	groups = "sdhi1_data4", "sdhi1_ctrl";
	568	function = "sdhi1";
	569	power-source = <1800>;
2c60a7df MD	570	};
	571
	572	sdhi2_pins: sd2 {
fec7b9f8 SH	573	groups = "sdhi2_data4", "sdhi2_ctrl";
fec7b9f8 SH	574	function = "sdhi2";
d3cec922 SH	575	power-source = <3300>;
	576	};
	577
	578	sdhi2_pins_uhs: sd2_uhs {
	579	groups = "sdhi2_data4", "sdhi2_ctrl";
	580	function = "sdhi2";
	581	power-source = <1800>;
2c60a7df MD	582	};
2c60a7df MD	583
a4d98bed	584	qspi_pins: qspi {
fec7b9f8 SH	585	groups = "qspi_ctrl", "qspi_data4";
fec7b9f8 SH	586	function = "qspi";
e02ee513	587	};
b16f05ab	588
a4d98bed	589	msiof0_pins: msiof0 {
fec7b9f8	590	groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
b16f05ab	591	"msiof0_tx";
fec7b9f8	592	function = "msiof0";
b16f05ab	593	};
1d41f36a	594
7540aeb0	595	usb0_pins: usb0 {
fec7b9f8 SH	596	groups = "usb0";
fec7b9f8 SH	597	function = "usb0";
7540aeb0 SS	598	};
	599
	600	usb1_pins: usb1 {
fec7b9f8 SH	601	groups = "usb1";
fec7b9f8 SH	602	function = "usb1";
7540aeb0	603	};
2cf08810	604
84e3a746 HV	605	vin0_pins: vin0 {
	606	groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
	607	function = "vin0";
	608	};
	609
2cf08810	610	vin1_pins: vin1 {
fec7b9f8 SH	611	groups = "vin1_data8", "vin1_clk";
fec7b9f8 SH	612	function = "vin1";
2cf08810	613	};
b160f615 KM	614
b160f615 KM	615	sound_pins: sound {
fec7b9f8 SH	616	groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
fec7b9f8 SH	617	function = "ssi";
b160f615 KM	618	};
	619
	620	sound_clk_pins: sound_clk {
fec7b9f8 SH	621	groups = "audio_clk_a";
fec7b9f8 SH	622	function = "audio_clk";
b160f615	623	};
1f52c659	624	};
760c277b	625
08e8f0f3 SS	626	&ether {
	627	pinctrl-0 = <&ether_pins &phy1_pins>;
	628	pinctrl-names = "default";
	629
	630	phy-handle = <&phy1>;
	631	renesas,ether-link-active-low;
815446d6	632	status = "okay";
08e8f0f3 SS	633
	634	phy1: ethernet-phy@1 {
	635	reg = <1>;
	636	interrupt-parent = <&irqc0>;
	637	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
19f647cb	638	micrel,led-mode = <1>;
08e8f0f3 SS	639	};
	640	};
	641
6a1d9460	642	&cmt0 {
815446d6	643	status = "okay";
6a1d9460 LP	644	};
6a1d9460 LP	645
760c277b VB	646	&sata0 {
	647	status = "okay";
	648	};
e02ee513	649
5ba55fa8 LP	650	&scif0 {
	651	pinctrl-0 = <&scif0_pins>;
	652	pinctrl-names = "default";
	653
	654	status = "okay";
	655	};
	656
	657	&scif1 {
	658	pinctrl-0 = <&scif1_pins>;
	659	pinctrl-names = "default";
	660
	661	status = "okay";
	662	};
	663
338f7ebf GU	664	&scif_clk {
338f7ebf GU	665	clock-frequency = <14745600>;
338f7ebf GU	666	};
338f7ebf GU	667
2c60a7df MD	668	&sdhi0 {
2c60a7df MD	669	pinctrl-0 = <&sdhi0_pins>;
d3cec922 SH	670	pinctrl-1 = <&sdhi0_pins_uhs>;
d3cec922 SH	671	pinctrl-names = "default", "state_uhs";
2c60a7df MD	672
	673	vmmc-supply = <&vcc_sdhi0>;
	674	vqmmc-supply = <&vccq_sdhi0>;
	675	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
	676	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
d3cec922	677	sd-uhs-sdr50;
0726729a	678	sd-uhs-sdr104;
2c60a7df MD	679	status = "okay";
	680	};
	681
	682	&sdhi1 {
	683	pinctrl-0 = <&sdhi1_pins>;
d3cec922 SH	684	pinctrl-1 = <&sdhi1_pins_uhs>;
d3cec922 SH	685	pinctrl-names = "default", "state_uhs";
2c60a7df MD	686
	687	vmmc-supply = <&vcc_sdhi1>;
	688	vqmmc-supply = <&vccq_sdhi1>;
	689	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	690	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
d3cec922	691	sd-uhs-sdr50;
2c60a7df MD	692	status = "okay";
	693	};
	694
	695	&sdhi2 {
	696	pinctrl-0 = <&sdhi2_pins>;
d3cec922 SH	697	pinctrl-1 = <&sdhi2_pins_uhs>;
d3cec922 SH	698	pinctrl-names = "default", "state_uhs";
2c60a7df MD	699
	700	vmmc-supply = <&vcc_sdhi2>;
	701	vqmmc-supply = <&vccq_sdhi2>;
	702	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
d3cec922	703	sd-uhs-sdr50;
2c60a7df MD	704	status = "okay";
	705	};
	706
6f3e4ee3	707	&qspi {
e02ee513 GU	708	pinctrl-0 = <&qspi_pins>;
	709	pinctrl-names = "default";
	710
	711	status = "okay";
	712
	713	flash: flash@0 {
cc3db02c	714	compatible = "spansion,s25fl512s", "jedec,spi-nor";
e02ee513 GU	715	reg = <0>;
e02ee513 GU	716	spi-max-frequency = <30000000>;
ed56083a GU	717	spi-tx-bus-width = <4>;
ed56083a GU	718	spi-rx-bus-width = <4>;
9c5becce HN	719	spi-cpha;
9c5becce HN	720	spi-cpol;
e02ee513 GU	721	m25p,fast-read;
e02ee513 GU	722
27fa0a6c	723	partitions {
f6531bb5	724	compatible = "fixed-partitions";
27fa0a6c GU	725	#address-cells = <1>;
	726	#size-cells = <1>;
	727
	728	partition@0 {
	729	label = "loader";
	730	reg = <0x00000000 0x00080000>;
	731	read-only;
	732	};
	733	partition@80000 {
	734	label = "user";
	735	reg = <0x00080000 0x00580000>;
	736	read-only;
	737	};
	738	partition@600000 {
	739	label = "flash";
	740	reg = <0x00600000 0x03a00000>;
	741	};
e02ee513 GU	742	};
	743	};
	744	};
b16f05ab GU	745
	746	&msiof0 {
	747	pinctrl-0 = <&msiof0_pins>;
	748	pinctrl-names = "default";
	749
	750	status = "okay";
	751
	752	pmic: pmic@0 {
	753	compatible = "renesas,r2a11302ft";
	754	reg = <0>;
	755	spi-max-frequency = <6000000>;
	756	spi-cpol;
	757	spi-cpha;
	758	};
	759	};
1d41f36a	760
6723438b SH	761	&i2c1 {
	762	pinctrl-0 = <&i2c1_pins>;
	763	pinctrl-names = "i2c-exio1";
	764	};
	765
897dfdbc SH	766	&i2c2 {
897dfdbc SH	767	pinctrl-0 = <&i2c2_pins>;
168a7099	768	pinctrl-names = "i2c-hdmi";
897dfdbc	769
a8d943ed	770	clock-frequency = <100000>;
897dfdbc SH	771	};
897dfdbc SH	772
be93275c WS	773	&i2c4 {
	774	pinctrl-0 = <&i2c4_pins>;
	775	pinctrl-names = "i2c-exio4";
	776	};
	777
1d41f36a	778	&i2c6 {
1d41f36a	779	status = "okay";
897dfdbc	780	clock-frequency = <100000>;
1d41f36a	781
a6b42266 GU	782	pmic@58 {
	783	compatible = "dlg,da9063";
	784	reg = <0x58>;
	785	interrupt-parent = <&irqc0>;
	786	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
	787	interrupt-controller;
	788
	789	rtc {
	790	compatible = "dlg,da9063-rtc";
	791	};
	792
	793	wdt {
	794	compatible = "dlg,da9063-watchdog";
	795	};
	796	};
	797
1d41f36a	798	vdd_dvfs: regulator@68 {
bd597f47	799	compatible = "dlg,da9210";
1d41f36a	800	reg = <0x68>;
4be7338d GU	801	interrupt-parent = <&irqc0>;
4be7338d GU	802	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
1d41f36a GI	803
	804	regulator-min-microvolt = <1000000>;
	805	regulator-max-microvolt = <1000000>;
	806	regulator-boot-on;
	807	regulator-always-on;
	808	};
	809	};
a57004ec	810
7540aeb0 SS	811	&pci0 {
	812	status = "okay";
	813	pinctrl-0 = <&usb0_pins>;
	814	pinctrl-names = "default";
	815	};
	816
	817	&pci1 {
	818	status = "okay";
	819	pinctrl-0 = <&usb1_pins>;
	820	pinctrl-names = "default";
	821	};
	822
fc4a00b7 YS	823	&hsusb {
	824	status = "okay";
	825	pinctrl-0 = <&usb0_pins>;
	826	pinctrl-names = "default";
	827	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
	828	};
	829
dc80d8bc SS	830	&usbphy {
	831	status = "okay";
	832	};
	833
998d7d64	834	&pcie_bus_clk {
ac6908b3	835	clock-frequency = <100000000>;
998d7d64 PE	836	};
	837
	838	&pciec {
	839	status = "okay";
	840	};
	841
a57004ec GI	842	&cpu0 {
	843	cpu0-supply = <&vdd_dvfs>;
	844	};
2cf08810	845
84e3a746 HV	846	/* HDMI video input */
	847	&vin0 {
	848	status = "okay";
	849	pinctrl-0 = <&vin0_pins>;
	850	pinctrl-names = "default";
	851
	852	port {
	853	#address-cells = <1>;
	854	#size-cells = <0>;
	855
	856	vin0ep2: endpoint {
	857	remote-endpoint = <&adv7612_out>;
	858	bus-width = <24>;
	859	hsync-active = <0>;
	860	vsync-active = <0>;
	861	pclk-sample = <1>;
	862	data-active = <1>;
	863	};
	864	};
	865	};
	866
2cf08810	867	/* composite video input */
2cf08810	868	&vin1 {
815446d6	869	status = "okay";
2cf08810	870	pinctrl-0 = <&vin1_pins>;
	871	pinctrl-names = "default";
	872
	873	port {
	874	#address-cells = <1>;
	875	#size-cells = <0>;
	876
	877	vin1ep: endpoint {
	878	remote-endpoint = <&adv7180>;
	879	bus-width = <8>;
	880	};
	881	};
	882	};
b160f615 KM	883
	884	&rcar_sound {
	885	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	886	pinctrl-names = "default";
	887
d2b541c9	888	/* Single DAI */
b160f615 KM	889	#sound-dai-cells = <0>;
	890
	891	status = "okay";
	892
	893	rcar_sound,dai {
	894	dai0 {
5c6d4b94 KM	895	playback = <&ssi0 &src2 &dvc0>;
5c6d4b94 KM	896	capture = <&ssi1 &src3 &dvc1>;
b160f615 KM	897	};
	898	};
	899	};
	900
b160f615	901	&ssi1 {
b160f615 KM	902	shared-pin;
b160f615 KM	903	};