[linux-2.6-block.git] / arch / arm / boot / dts / r8a7790-lager.dts

/*
 * Device Tree Source for the Lager board
 *
 * Copyright (C) 2013-2014 Renesas Solutions Corp.
 * Copyright (C) 2014 Cogent Embedded, Inc.
 * Copyright (C) 2015-2016 Renesas Electronics Corporation
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

/*
 * SSI-AK4643
 *
 * SW1: 1: AK4643
 *      2: CN22
 *      3: ADV7511
 *
 * This command is required when Playback/Capture
 *
 *	amixer set "LINEOUT Mixer DACL" on
 *	amixer set "DVC Out" 100%
 *	amixer set "DVC In" 100%
 *
 * You can use Mute
 *
 *	amixer set "DVC Out Mute" on
 *	amixer set "DVC In Mute" on
 *
 * You can use Volume Ramp
 *
 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
 *	amixer set "DVC Out Ramp" on
 *	aplay xxx.wav &
 *	amixer set "DVC Out"  80%  // Volume Down
 *	amixer set "DVC Out" 100%  // Volume Up
 */

/dts-v1/;
#include "r8a7790.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "Lager";
	compatible = "renesas,lager", "renesas,r8a7790";

	aliases {
		serial0 = &scif0;
		serial1 = &scifa1;
		i2c8 = &gpioi2c1;
		i2c10 = &i2cexio0;
		i2c11 = &i2cexio1;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	memory@140000000 {
		device_type = "memory";
		reg = <1 0x40000000 0 0xc0000000>;
	};

	lbsc {
		#address-cells = <1>;
		#size-cells = <1>;
	};

	keyboard {
		compatible = "gpio-keys";

		one {
			linux,code = <KEY_1>;
			label = "SW2-1";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
		};
		two {
			linux,code = <KEY_2>;
			label = "SW2-2";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
		};
		three {
			linux,code = <KEY_3>;
			label = "SW2-3";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
		};
		four {
			linux,code = <KEY_4>;
			label = "SW2-4";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
		};
	};

	leds {
		compatible = "gpio-leds";
		led6 {
			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
		};
		led7 {
			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
		};
		led8 {
			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
		};
	};

	fixedregulator3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};

	vcc_sdhi0: regulator-vcc-sdhi0 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi0: regulator-vccq-sdhi0 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI0 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vcc_sdhi2: regulator-vcc-sdhi2 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI2 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi2: regulator-vccq-sdhi2 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI2 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	audio_clock: audio_clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <11289600>;
	};

	rsnd_ak4643: sound {
		compatible = "simple-audio-card";

		simple-audio-card,format = "left_j";
		simple-audio-card,bitclock-master = <&sndcodec>;
		simple-audio-card,frame-master = <&sndcodec>;

		sndcpu: simple-audio-card,cpu {
			sound-dai = <&rcar_sound>;
		};

		sndcodec: simple-audio-card,codec {
			sound-dai = <&ak4643>;
			clocks = <&audio_clock>;
		};
	};

	vga-encoder {
		compatible = "adi,adv7123";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7123_in: endpoint {
					remote-endpoint = <&du_out_rgb>;
				};
			};
			port@1 {
				reg = <1>;
				adv7123_out: endpoint {
					remote-endpoint = <&vga_in>;
				};
			};
		};
	};

	vga {
		compatible = "vga-connector";

		port {
			vga_in: endpoint {
				remote-endpoint = <&adv7123_out>;
			};
		};
	};

	hdmi-in {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&adv7612_in>;
			};
		};
	};

	hdmi-out {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_out: endpoint {
				remote-endpoint = <&adv7511_out>;
			};
		};
	};

	x2_clk: x2-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <148500000>;
	};

	x13_clk: x13-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <148500000>;
	};

	gpioi2c1: i2c-8 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
			 &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
			>;
		i2c-gpio,delay-us = <5>;
	};

	/*
	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
	 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
	 * Note: For testing the I2C slave feature, it is convenient to connect this
	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
	 * instantiate the slave device at runtime according to the documentation.
	 * You can then communicate with the slave via IIC3.
	 *
	 * IIC0/I2C0 does not appear to support fallback to GPIO.
	 */
	i2cexio0: i2c-10 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&iic0>, <&i2c0>;
		i2c-bus-name = "i2c-exio0";
		#address-cells = <1>;
		#size-cells = <0>;
	};

	/*
	 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
	 * This is similar to the arangement described for i2cexio0 (above)
	 * with a fallback to GPIO also provided.
	 */
	i2cexio1: i2c-11 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
		i2c-bus-name = "i2c-exio1";
		#address-cells = <1>;
		#size-cells = <0>;
	};
};

&du {
	pinctrl-0 = <&du_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
		 <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
		 <&x13_clk>, <&x2_clk>;
	clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
		      "dclkin.0", "dclkin.1";

	ports {
		port@0 {
			endpoint {
				remote-endpoint = <&adv7123_in>;
			};
		};
		port@1 {
			endpoint {
				remote-endpoint = <&adv7511_in>;
			};
		};
		port@2 {
			lvds_connector: endpoint {
			};
		};
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	du_pins: du {
		groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
		function = "du";
	};

	scif0_pins: scif0 {
		groups = "scif0_data";
		function = "scif0";
	};

	scif_clk_pins: scif_clk {
		groups = "scif_clk";
		function = "scif_clk";
	};

	ether_pins: ether {
		groups = "eth_link", "eth_mdio", "eth_rmii";
		function = "eth";
	};

	phy1_pins: phy1 {
		groups = "intc_irq0";
		function = "intc";
	};

	scifa1_pins: scifa1 {
		groups = "scifa1_data";
		function = "scifa1";
	};

	sdhi0_pins: sd0 {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
		power-source = <3300>;
	};

	sdhi0_pins_uhs: sd0_uhs {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
		power-source = <1800>;
	};

	sdhi2_pins: sd2 {
		groups = "sdhi2_data4", "sdhi2_ctrl";
		function = "sdhi2";
		power-source = <3300>;
	};

	sdhi2_pins_uhs: sd2_uhs {
		groups = "sdhi2_data4", "sdhi2_ctrl";
		function = "sdhi2";
		power-source = <1800>;
	};

	mmc1_pins: mmc1 {
		groups = "mmc1_data8", "mmc1_ctrl";
		function = "mmc1";
	};

	qspi_pins: qspi {
		groups = "qspi_ctrl", "qspi_data4";
		function = "qspi";
	};

	msiof1_pins: msiof1 {
		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
				 "msiof1_tx";
		function = "msiof1";
	};

	i2c0_pins: i2c0 {
		groups = "i2c0";
		function = "i2c0";
	};

	iic0_pins: iic0 {
		groups = "iic0";
		function = "iic0";
	};

	i2c1_pins: i2c1 {
		groups = "i2c1";
		function = "i2c1";
	};

	iic1_pins: iic1 {
		groups = "iic1";
		function = "iic1";
	};

	iic2_pins: iic2 {
		groups = "iic2";
		function = "iic2";
	};

	iic3_pins: iic3 {
		groups = "iic3";
		function = "iic3";
	};

	hsusb_pins: hsusb {
		groups = "usb0_ovc_vbus";
		function = "usb0";
	};

	usb0_pins: usb0 {
		groups = "usb0";
		function = "usb0";
	};

	usb1_pins: usb1 {
		groups = "usb1";
		function = "usb1";
	};

	usb2_pins: usb2 {
		groups = "usb2";
		function = "usb2";
	};

	vin0_pins: vin0 {
		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
		function = "vin0";
	};

	vin1_pins: vin1 {
		groups = "vin1_data8", "vin1_clk";
		function = "vin1";
	};

	sound_pins: sound {
		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
		function = "ssi";
	};

	sound_clk_pins: sound_clk {
		groups = "audio_clk_a";
		function = "audio_clk";
	};
};

&ether {
	pinctrl-0 = <&ether_pins &phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
		interrupt-parent = <&irqc0>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		micrel,led-mode = <1>;
	};
};

&cmt0 {
	status = "okay";
};

&mmcif1 {
	pinctrl-0 = <&mmc1_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&fixedregulator3v3>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&sata1 {
	status = "okay";
};

&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash: flash@0 {
		compatible = "spansion,s25fl512s", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <30000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		spi-cpha;
		spi-cpol;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "loader";
				reg = <0x00000000 0x00040000>;
				read-only;
			};
			partition@40000 {
				label = "user";
				reg = <0x00040000 0x00400000>;
				read-only;
			};
			partition@440000 {
				label = "flash";
				reg = <0x00440000 0x03bc0000>;
			};
		};
	};
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scifa1 {
	pinctrl-0 = <&scifa1_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif_clk {
	clock-frequency = <14745600>;
};

&msiof1 {
	pinctrl-0 = <&msiof1_pins>;
	pinctrl-names = "default";

	status = "okay";

	pmic: pmic@0 {
		compatible = "renesas,r2a11302ft";
		reg = <0>;
		spi-max-frequency = <6000000>;
		spi-cpol;
		spi-cpha;
	};
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-1 = <&sdhi0_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi0>;
	vqmmc-supply = <&vccq_sdhi0>;
	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	status = "okay";
};

&sdhi2 {
	pinctrl-0 = <&sdhi2_pins>;
	pinctrl-1 = <&sdhi2_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi2>;
	vqmmc-supply = <&vccq_sdhi2>;
	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
	sd-uhs-sdr50;
	status = "okay";
};

&cpu0 {
	cpu0-supply = <&vdd_dvfs>;
};

&i2c0	{
	pinctrl-0 = <&i2c0_pins>;
	pinctrl-names = "i2c-exio0";
};

&iic0	{
	pinctrl-0 = <&iic0_pins>;
	pinctrl-names = "i2c-exio0";
};

&i2c1	{
	pinctrl-0 = <&i2c1_pins>;
	pinctrl-names = "i2c-exio1";
};

&iic1	{
	pinctrl-0 = <&iic1_pins>;
	pinctrl-names = "i2c-exio1";
};

&iic2	{
	status = "okay";
	pinctrl-0 = <&iic2_pins>;
	pinctrl-names = "default";

	clock-frequency = <100000>;

	ak4643: codec@12 {
		compatible = "asahi-kasei,ak4643";
		#sound-dai-cells = <0>;
		reg = <0x12>;
	};

	composite-in@20 {
		compatible = "adi,adv7180";
		reg = <0x20>;
		remote = <&vin1>;

		port {
			adv7180: endpoint {
				bus-width = <8>;
				remote-endpoint = <&vin1ep0>;
			};
		};
	};

	hdmi@39 {
		compatible = "adi,adv7511w";
		reg = <0x39>;
		interrupt-parent = <&gpio1>;
		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;

		adi,input-depth = <8>;
		adi,input-colorspace = "rgb";
		adi,input-clock = "1x";
		adi,input-style = <1>;
		adi,input-justification = "evenly";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7511_in: endpoint {
					remote-endpoint = <&du_out_lvds0>;
				};
			};

			port@1 {
				reg = <1>;
				adv7511_out: endpoint {
					remote-endpoint = <&hdmi_con_out>;
				};
			};
		};
	};

	hdmi-in@4c {
		compatible = "adi,adv7612";
		reg = <0x4c>;
		interrupt-parent = <&gpio1>;
		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
		default-input = <0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7612_in: endpoint {
					remote-endpoint = <&hdmi_con_in>;
				};
			};

			port@2 {
				reg = <2>;
				adv7612_out: endpoint {
					remote-endpoint = <&vin0ep2>;
				};
			};
		};
	};
};

&iic3 {
	pinctrl-names = "default";
	pinctrl-0 = <&iic3_pins>;
	status = "okay";

	pmic@58 {
		compatible = "dlg,da9063";
		reg = <0x58>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;

		rtc {
			compatible = "dlg,da9063-rtc";
		};

		wdt {
			compatible = "dlg,da9063-watchdog";
		};
	};

	vdd_dvfs: regulator@68 {
		compatible = "dlg,da9210";
		reg = <0x68>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;

		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1000000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&pci0 {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
};

&pci1 {
	status = "okay";
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";
};

&xhci {
	status = "okay";
	pinctrl-0 = <&usb2_pins>;
	pinctrl-names = "default";
};

&pci2 {
	status = "okay";
	pinctrl-0 = <&usb2_pins>;
	pinctrl-names = "default";
};

&hsusb {
	status = "okay";
	pinctrl-0 = <&hsusb_pins>;
	pinctrl-names = "default";
	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
};

&usbphy {
	status = "okay";
};

/* HDMI video input */
&vin0 {
	pinctrl-0 = <&vin0_pins>;
	pinctrl-names = "default";

	status = "okay";

	port {
		vin0ep2: endpoint {
			remote-endpoint = <&adv7612_out>;
			bus-width = <24>;
			hsync-active = <0>;
			vsync-active = <0>;
			pclk-sample = <1>;
			data-active = <1>;
		};
	};
};

/* composite video input */
&vin1 {
	pinctrl-0 = <&vin1_pins>;
	pinctrl-names = "default";

	status = "okay";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		vin1ep0: endpoint {
			remote-endpoint = <&adv7180>;
			bus-width = <8>;
		};
	};
};

&rcar_sound {
	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	pinctrl-names = "default";

	/* Single DAI */
	#sound-dai-cells = <0>;

	status = "okay";

	rcar_sound,dai {
		dai0 {
			playback = <&ssi0 &src2 &dvc0>;
			capture  = <&ssi1 &src3 &dvc1>;
		};
	};
};

&ssi1 {
	shared-pin;
};
Commit	Line	Data
3cc828fd MD	1	/*
	2	* Device Tree Source for the Lager board
	3	*
da4ea951 SS	4	* Copyright (C) 2013-2014 Renesas Solutions Corp.
da4ea951 SS	5	* Copyright (C) 2014 Cogent Embedded, Inc.
880cb570	6	* Copyright (C) 2015-2016 Renesas Electronics Corporation
3cc828fd MD	7	*
	8	* This file is licensed under the terms of the GNU General Public License
	9	* version 2. This program is licensed "as is" without any warranty of any
	10	* kind, whether express or implied.
	11	*/
	12
8ea7a44a KM	13	/*
	14	* SSI-AK4643
	15	*
	16	* SW1: 1: AK4643
	17	* 2: CN22
	18	* 3: ADV7511
	19	*
	20	* This command is required when Playback/Capture
	21	*
	22	* amixer set "LINEOUT Mixer DACL" on
e110c541 KM	23	* amixer set "DVC Out" 100%
	24	* amixer set "DVC In" 100%
	25	*
	26	* You can use Mute
	27	*
	28	* amixer set "DVC Out Mute" on
	29	* amixer set "DVC In Mute" on
bd2e4a62 KM	30	*
	31	* You can use Volume Ramp
	32	*
	33	* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
	34	* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
	35	* amixer set "DVC Out Ramp" on
	36	* aplay xxx.wav &
	37	* amixer set "DVC Out" 80% // Volume Down
	38	* amixer set "DVC Out" 100% // Volume Up
8ea7a44a KM	39	*/
8ea7a44a KM	40
3cc828fd	41	/dts-v1/;
31c46cbf	42	#include "r8a7790.dtsi"
39fa511b	43	#include <dt-bindings/gpio/gpio.h>
f7dcd382	44	#include <dt-bindings/input/input.h>
3cc828fd MD	45
	46	/ {
	47	model = "Lager";
	48	compatible = "renesas,lager", "renesas,r8a7790";
	49
4e9c4877	50	aliases {
430d7bad	51	serial0 = &scif0;
78c11ec2	52	serial1 = &scifa1;
b2f15ca6	53	i2c8 = &gpioi2c1;
1e26fcf3	54	i2c10 = &i2cexio0;
b2f15ca6	55	i2c11 = &i2cexio1;
4e9c4877 LP	56	};
4e9c4877 LP	57
3cc828fd	58	chosen {
569dd56c	59	bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
57d19f81	60	stdout-path = "serial0:115200n8";
3cc828fd MD	61	};
	62
	63	memory@40000000 {
	64	device_type = "memory";
7b16c61a	65	reg = <0 0x40000000 0 0x40000000>;
3cc828fd MD	66	};
3cc828fd MD	67
126f998e	68	memory@140000000 {
62bc32a2	69	device_type = "memory";
7b16c61a	70	reg = <1 0x40000000 0 0xc0000000>;
62bc32a2 MD	71	};
62bc32a2 MD	72
3cc828fd MD	73	lbsc {
	74	#address-cells = <1>;
	75	#size-cells = <1>;
	76	};
39fa511b	77
54caf681	78	keyboard {
f7dcd382 MD	79	compatible = "gpio-keys";
f7dcd382 MD	80
affe802c	81	one {
f7dcd382 MD	82	linux,code = <KEY_1>;
f7dcd382 MD	83	label = "SW2-1";
0cc16889	84	wakeup-source;
f7dcd382 MD	85	debounce-interval = <20>;
	86	gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	87	};
affe802c	88	two {
f7dcd382 MD	89	linux,code = <KEY_2>;
f7dcd382 MD	90	label = "SW2-2";
0cc16889	91	wakeup-source;
f7dcd382 MD	92	debounce-interval = <20>;
	93	gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
	94	};
affe802c	95	three {
f7dcd382 MD	96	linux,code = <KEY_3>;
f7dcd382 MD	97	label = "SW2-3";
0cc16889	98	wakeup-source;
f7dcd382 MD	99	debounce-interval = <20>;
	100	gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
	101	};
affe802c	102	four {
f7dcd382 MD	103	linux,code = <KEY_4>;
f7dcd382 MD	104	label = "SW2-4";
0cc16889	105	wakeup-source;
f7dcd382 MD	106	debounce-interval = <20>;
	107	gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
	108	};
	109	};
	110
39fa511b LP	111	leds {
	112	compatible = "gpio-leds";
	113	led6 {
	114	gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
	115	};
	116	led7 {
	117	gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
	118	};
	119	led8 {
	120	gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
	121	};
	122	};
	123
affe802c	124	fixedregulator3v3: regulator-3v3 {
39fa511b LP	125	compatible = "regulator-fixed";
	126	regulator-name = "fixed-3.3V";
	127	regulator-min-microvolt = <3300000>;
	128	regulator-max-microvolt = <3300000>;
	129	regulator-boot-on;
	130	regulator-always-on;
	131	};
c6119944	132
affe802c	133	vcc_sdhi0: regulator-vcc-sdhi0 {
c6119944 KM	134	compatible = "regulator-fixed";
	135
	136	regulator-name = "SDHI0 Vcc";
	137	regulator-min-microvolt = <3300000>;
	138	regulator-max-microvolt = <3300000>;
	139
	140	gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
	141	enable-active-high;
	142	};
	143
affe802c	144	vccq_sdhi0: regulator-vccq-sdhi0 {
c6119944 KM	145	compatible = "regulator-gpio";
	146
	147	regulator-name = "SDHI0 VccQ";
	148	regulator-min-microvolt = <1800000>;
	149	regulator-max-microvolt = <3300000>;
	150
	151	gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
	152	gpios-states = <1>;
	153	states = <3300000 1
	154	1800000 0>;
	155	};
	156
affe802c	157	vcc_sdhi2: regulator-vcc-sdhi2 {
c6119944 KM	158	compatible = "regulator-fixed";
	159
	160	regulator-name = "SDHI2 Vcc";
	161	regulator-min-microvolt = <3300000>;
	162	regulator-max-microvolt = <3300000>;
	163
	164	gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
	165	enable-active-high;
	166	};
	167
affe802c	168	vccq_sdhi2: regulator-vccq-sdhi2 {
c6119944 KM	169	compatible = "regulator-gpio";
	170
	171	regulator-name = "SDHI2 VccQ";
	172	regulator-min-microvolt = <1800000>;
	173	regulator-max-microvolt = <3300000>;
	174
	175	gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
	176	gpios-states = <1>;
	177	states = <3300000 1
	178	1800000 0>;
	179	};
3edd18ff	180
a5bad2c7	181	audio_clock: audio_clock {
6bc651af KM	182	compatible = "fixed-clock";
	183	#clock-cells = <0>;
	184	clock-frequency = <11289600>;
6bc651af KM	185	};
6bc651af KM	186
30be0ba5	187	rsnd_ak4643: sound {
8ea7a44a KM	188	compatible = "simple-audio-card";
	189
	190	simple-audio-card,format = "left_j";
	191	simple-audio-card,bitclock-master = <&sndcodec>;
	192	simple-audio-card,frame-master = <&sndcodec>;
	193
	194	sndcpu: simple-audio-card,cpu {
	195	sound-dai = <&rcar_sound>;
	196	};
	197
	198	sndcodec: simple-audio-card,codec {
	199	sound-dai = <&ak4643>;
6bc651af	200	clocks = <&audio_clock>;
8ea7a44a KM	201	};
	202	};
	203
3edd18ff LP	204	vga-encoder {
	205	compatible = "adi,adv7123";
	206
	207	ports {
	208	#address-cells = <1>;
	209	#size-cells = <0>;
	210
	211	port@0 {
	212	reg = <0>;
	213	adv7123_in: endpoint {
	214	remote-endpoint = <&du_out_rgb>;
	215	};
	216	};
	217	port@1 {
	218	reg = <1>;
	219	adv7123_out: endpoint {
	220	remote-endpoint = <&vga_in>;
	221	};
	222	};
	223	};
	224	};
	225
	226	vga {
	227	compatible = "vga-connector";
	228
	229	port {
	230	vga_in: endpoint {
	231	remote-endpoint = <&adv7123_out>;
	232	};
	233	};
	234	};
fd25cdd1	235
56548d0c WT	236	hdmi-in {
	237	compatible = "hdmi-connector";
	238	type = "a";
	239
	240	port {
	241	hdmi_con_in: endpoint {
	242	remote-endpoint = <&adv7612_in>;
	243	};
	244	};
	245	};
	246
fd25cdd1 LP	247	hdmi-out {
	248	compatible = "hdmi-connector";
	249	type = "a";
	250
	251	port {
56548d0c	252	hdmi_con_out: endpoint {
fd25cdd1 LP	253	remote-endpoint = <&adv7511_out>;
	254	};
	255	};
	256	};
26c00ab4 LP	257
	258	x2_clk: x2-clock {
	259	compatible = "fixed-clock";
	260	#clock-cells = <0>;
	261	clock-frequency = <148500000>;
	262	};
	263
	264	x13_clk: x13-clock {
	265	compatible = "fixed-clock";
	266	#clock-cells = <0>;
	267	clock-frequency = <148500000>;
	268	};
880cb570	269
b2f15ca6 SH	270	gpioi2c1: i2c-8 {
	271	#address-cells = <1>;
	272	#size-cells = <0>;
	273	compatible = "i2c-gpio";
	274	status = "disabled";
	275	gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
	276	&gpio1 16 GPIO_ACTIVE_HIGH /* scl */
	277	>;
	278	i2c-gpio,delay-us = <5>;
	279	};
	280
880cb570 WS	281	/*
	282	* IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
	283	* We use the I2C demuxer, so the desired IP core can be selected at runtime
	284	* depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
	285	* Note: For testing the I2C slave feature, it is convenient to connect this
	286	* bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
	287	* instantiate the slave device at runtime according to the documentation.
	288	* You can then communicate with the slave via IIC3.
1e26fcf3 SH	289	*
1e26fcf3 SH	290	* IIC0/I2C0 does not appear to support fallback to GPIO.
880cb570	291	*/
1e26fcf3	292	i2cexio0: i2c-10 {
880cb570 WS	293	compatible = "i2c-demux-pinctrl";
880cb570 WS	294	i2c-parent = <&iic0>, <&i2c0>;
1e26fcf3	295	i2c-bus-name = "i2c-exio0";
880cb570 WS	296	#address-cells = <1>;
	297	#size-cells = <0>;
	298	};
b2f15ca6 SH	299
	300	/*
	301	* IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
	302	* This is similar to the arangement described for i2cexio0 (above)
	303	* with a fallback to GPIO also provided.
	304	*/
	305	i2cexio1: i2c-11 {
	306	compatible = "i2c-demux-pinctrl";
	307	i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
	308	i2c-bus-name = "i2c-exio1";
	309	#address-cells = <1>;
	310	#size-cells = <0>;
	311	};
3edd18ff LP	312	};
	313
	314	&du {
	315	pinctrl-0 = <&du_pins>;
	316	pinctrl-names = "default";
	317	status = "okay";
	318
5802c420 GU	319	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
5802c420 GU	320	<&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
26c00ab4 LP	321	<&x13_clk>, <&x2_clk>;
	322	clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
	323	"dclkin.0", "dclkin.1";
	324
3edd18ff LP	325	ports {
	326	port@0 {
	327	endpoint {
	328	remote-endpoint = <&adv7123_in>;
	329	};
	330	};
fd25cdd1 LP	331	port@1 {
	332	endpoint {
	333	remote-endpoint = <&adv7511_in>;
	334	};
	335	};
3edd18ff LP	336	port@2 {
	337	lvds_connector: endpoint {
	338	};
	339	};
	340	};
39fa511b LP	341	};
39fa511b LP	342
62e43056 LP	343	&extal_clk {
	344	clock-frequency = <20000000>;
	345	};
	346
39fa511b	347	&pfc {
1781460c GU	348	pinctrl-0 = <&scif_clk_pins>;
	349	pinctrl-names = "default";
	350
3024f507	351	du_pins: du {
2ffc224f SH	352	groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
2ffc224f SH	353	function = "du";
3024f507 LP	354	};
3024f507 LP	355
ca348298	356	scif0_pins: scif0 {
2ffc224f SH	357	groups = "scif0_data";
2ffc224f SH	358	function = "scif0";
39fa511b LP	359	};
39fa511b LP	360
1781460c	361	scif_clk_pins: scif_clk {
2ffc224f SH	362	groups = "scif_clk";
2ffc224f SH	363	function = "scif_clk";
1781460c GU	364	};
1781460c GU	365
da4ea951	366	ether_pins: ether {
2ffc224f SH	367	groups = "eth_link", "eth_mdio", "eth_rmii";
2ffc224f SH	368	function = "eth";
da4ea951 SS	369	};
	370
	371	phy1_pins: phy1 {
2ffc224f SH	372	groups = "intc_irq0";
2ffc224f SH	373	function = "intc";
da4ea951 SS	374	};
da4ea951 SS	375
ca348298	376	scifa1_pins: scifa1 {
2ffc224f SH	377	groups = "scifa1_data";
2ffc224f SH	378	function = "scifa1";
39fa511b LP	379	};
39fa511b LP	380
c6119944	381	sdhi0_pins: sd0 {
2ffc224f SH	382	groups = "sdhi0_data4", "sdhi0_ctrl";
2ffc224f SH	383	function = "sdhi0";
1ca79699 WS	384	power-source = <3300>;
	385	};
	386
	387	sdhi0_pins_uhs: sd0_uhs {
	388	groups = "sdhi0_data4", "sdhi0_ctrl";
	389	function = "sdhi0";
	390	power-source = <1800>;
c6119944 KM	391	};
	392
	393	sdhi2_pins: sd2 {
2ffc224f SH	394	groups = "sdhi2_data4", "sdhi2_ctrl";
2ffc224f SH	395	function = "sdhi2";
1ca79699 WS	396	power-source = <3300>;
	397	};
	398
	399	sdhi2_pins_uhs: sd2_uhs {
	400	groups = "sdhi2_data4", "sdhi2_ctrl";
	401	function = "sdhi2";
	402	power-source = <1800>;
c6119944 KM	403	};
c6119944 KM	404
39fa511b	405	mmc1_pins: mmc1 {
2ffc224f SH	406	groups = "mmc1_data8", "mmc1_ctrl";
2ffc224f SH	407	function = "mmc1";
39fa511b	408	};
9fe7c4f8	409
85c5e4c4	410	qspi_pins: qspi {
2ffc224f SH	411	groups = "qspi_ctrl", "qspi_data4";
2ffc224f SH	412	function = "qspi";
9fe7c4f8	413	};
b0403b91	414
85c5e4c4	415	msiof1_pins: msiof1 {
2ffc224f	416	groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
b0403b91	417	"msiof1_tx";
2ffc224f	418	function = "msiof1";
b0403b91	419	};
05f72e03	420
880cb570	421	i2c0_pins: i2c0 {
2ffc224f SH	422	groups = "i2c0";
2ffc224f SH	423	function = "i2c0";
880cb570 WS	424	};
880cb570 WS	425
535118ca	426	iic0_pins: iic0 {
2ffc224f SH	427	groups = "iic0";
2ffc224f SH	428	function = "iic0";
535118ca WS	429	};
535118ca WS	430
b2f15ca6 SH	431	i2c1_pins: i2c1 {
	432	groups = "i2c1";
	433	function = "i2c1";
	434	};
	435
cb9a2b12	436	iic1_pins: iic1 {
2ffc224f SH	437	groups = "iic1";
2ffc224f SH	438	function = "iic1";
d90bf60c SH	439	};
d90bf60c SH	440
cb9a2b12	441	iic2_pins: iic2 {
2ffc224f SH	442	groups = "iic2";
2ffc224f SH	443	function = "iic2";
d90bf60c SH	444	};
d90bf60c SH	445
5179ffd0	446	iic3_pins: iic3 {
2ffc224f SH	447	groups = "iic3";
2ffc224f SH	448	function = "iic3";
05f72e03	449	};
d8584660	450
e03074a7	451	hsusb_pins: hsusb {
2ffc224f SH	452	groups = "usb0_ovc_vbus";
2ffc224f SH	453	function = "usb0";
e03074a7 YS	454	};
e03074a7 YS	455
d8584660	456	usb0_pins: usb0 {
2ffc224f SH	457	groups = "usb0";
2ffc224f SH	458	function = "usb0";
d8584660 BD	459	};
	460
	461	usb1_pins: usb1 {
2ffc224f SH	462	groups = "usb1";
2ffc224f SH	463	function = "usb1";
d8584660 BD	464	};
	465
	466	usb2_pins: usb2 {
2ffc224f SH	467	groups = "usb2";
2ffc224f SH	468	function = "usb2";
d8584660	469	};
d594c977	470
56548d0c WT	471	vin0_pins: vin0 {
	472	groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
	473	function = "vin0";
	474	};
	475
da84fd93	476	vin1_pins: vin1 {
2ffc224f SH	477	groups = "vin1_data8", "vin1_clk";
2ffc224f SH	478	function = "vin1";
d594c977	479	};
8ea7a44a KM	480
8ea7a44a KM	481	sound_pins: sound {
2ffc224f SH	482	groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
2ffc224f SH	483	function = "ssi";
8ea7a44a KM	484	};
	485
	486	sound_clk_pins: sound_clk {
2ffc224f SH	487	groups = "audio_clk_a";
2ffc224f SH	488	function = "audio_clk";
8ea7a44a	489	};
39fa511b LP	490	};
39fa511b LP	491
da4ea951 SS	492	&ether {
	493	pinctrl-0 = <&ether_pins &phy1_pins>;
	494	pinctrl-names = "default";
	495
	496	phy-handle = <&phy1>;
	497	renesas,ether-link-active-low;
fd7a8cbf	498	status = "okay";
da4ea951 SS	499
	500	phy1: ethernet-phy@1 {
	501	reg = <1>;
	502	interrupt-parent = <&irqc0>;
	503	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
1c47a6aa	504	micrel,led-mode = <1>;
da4ea951 SS	505	};
	506	};
	507
247fd5ec	508	&cmt0 {
fd7a8cbf	509	status = "okay";
247fd5ec LP	510	};
247fd5ec LP	511
39fa511b LP	512	&mmcif1 {
	513	pinctrl-0 = <&mmc1_pins>;
	514	pinctrl-names = "default";
	515
	516	vmmc-supply = <&fixedregulator3v3>;
	517	bus-width = <8>;
	518	non-removable;
	519	status = "okay";
3cc828fd	520	};
c6181b9f VB	521
	522	&sata1 {
	523	status = "okay";
	524	};
9fe7c4f8	525
fad6d45c	526	&qspi {
9fe7c4f8 GU	527	pinctrl-0 = <&qspi_pins>;
	528	pinctrl-names = "default";
	529
	530	status = "okay";
	531
	532	flash: flash@0 {
755185b2	533	compatible = "spansion,s25fl512s", "jedec,spi-nor";
9fe7c4f8 GU	534	reg = <0>;
9fe7c4f8 GU	535	spi-max-frequency = <30000000>;
9909d2cb GU	536	spi-tx-bus-width = <4>;
9909d2cb GU	537	spi-rx-bus-width = <4>;
cbf41168 HN	538	spi-cpha;
cbf41168 HN	539	spi-cpol;
9fe7c4f8 GU	540	m25p,fast-read;
9fe7c4f8 GU	541
f58bac70	542	partitions {
b88ddbdd	543	compatible = "fixed-partitions";
f58bac70 GU	544	#address-cells = <1>;
	545	#size-cells = <1>;
	546
	547	partition@0 {
	548	label = "loader";
	549	reg = <0x00000000 0x00040000>;
	550	read-only;
	551	};
	552	partition@40000 {
	553	label = "user";
	554	reg = <0x00040000 0x00400000>;
	555	read-only;
	556	};
	557	partition@440000 {
	558	label = "flash";
	559	reg = <0x00440000 0x03bc0000>;
	560	};
9fe7c4f8 GU	561	};
	562	};
	563	};
c6119944	564
430d7bad UH	565	&scif0 {
430d7bad UH	566	pinctrl-0 = <&scif0_pins>;
4e9c4877 LP	567	pinctrl-names = "default";
	568
	569	status = "okay";
	570	};
	571
7c055894 WS	572	&scifa1 {
7c055894 WS	573	pinctrl-0 = <&scifa1_pins>;
4e9c4877 LP	574	pinctrl-names = "default";
	575
	576	status = "okay";
	577	};
	578
1781460c GU	579	&scif_clk {
1781460c GU	580	clock-frequency = <14745600>;
1781460c GU	581	};
1781460c GU	582
b0403b91 GU	583	&msiof1 {
	584	pinctrl-0 = <&msiof1_pins>;
	585	pinctrl-names = "default";
	586
	587	status = "okay";
	588
	589	pmic: pmic@0 {
	590	compatible = "renesas,r2a11302ft";
	591	reg = <0>;
	592	spi-max-frequency = <6000000>;
	593	spi-cpol;
	594	spi-cpha;
	595	};
b0403b91 GU	596	};
b0403b91 GU	597
c6119944 KM	598	&sdhi0 {
c6119944 KM	599	pinctrl-0 = <&sdhi0_pins>;
1ca79699 WS	600	pinctrl-1 = <&sdhi0_pins_uhs>;
1ca79699 WS	601	pinctrl-names = "default", "state_uhs";
c6119944 KM	602
	603	vmmc-supply = <&vcc_sdhi0>;
	604	vqmmc-supply = <&vccq_sdhi0>;
	605	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
1ca79699	606	sd-uhs-sdr50;
dcc2fe78	607	sd-uhs-sdr104;
c6119944 KM	608	status = "okay";
	609	};
	610
	611	&sdhi2 {
	612	pinctrl-0 = <&sdhi2_pins>;
1ca79699 WS	613	pinctrl-1 = <&sdhi2_pins_uhs>;
1ca79699 WS	614	pinctrl-names = "default", "state_uhs";
c6119944 KM	615
	616	vmmc-supply = <&vcc_sdhi2>;
	617	vqmmc-supply = <&vccq_sdhi2>;
	618	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
1ca79699	619	sd-uhs-sdr50;
c6119944 KM	620	status = "okay";
c6119944 KM	621	};
05f72e03	622
b989e138 BC	623	&cpu0 {
	624	cpu0-supply = <&vdd_dvfs>;
	625	};
e489c2a9	626
880cb570 WS	627	&i2c0 {
880cb570 WS	628	pinctrl-0 = <&i2c0_pins>;
1e26fcf3	629	pinctrl-names = "i2c-exio0";
880cb570 WS	630	};
880cb570 WS	631
cb9a2b12	632	&iic0 {
535118ca	633	pinctrl-0 = <&iic0_pins>;
1e26fcf3	634	pinctrl-names = "i2c-exio0";
e489c2a9 BD	635	};
e489c2a9 BD	636
b2f15ca6 SH	637	&i2c1 {
	638	pinctrl-0 = <&i2c1_pins>;
	639	pinctrl-names = "i2c-exio1";
	640	};
	641
cb9a2b12	642	&iic1 {
cb9a2b12	643	pinctrl-0 = <&iic1_pins>;
b2f15ca6	644	pinctrl-names = "i2c-exio1";
e489c2a9 BD	645	};
e489c2a9 BD	646
cb9a2b12	647	&iic2 {
fd7a8cbf	648	status = "okay";
cb9a2b12	649	pinctrl-0 = <&iic2_pins>;
e1a2c4eb	650	pinctrl-names = "default";
d594c977	651
177d8bea KM	652	clock-frequency = <100000>;
177d8bea KM	653
d22b1687	654	ak4643: codec@12 {
8ea7a44a KM	655	compatible = "asahi-kasei,ak4643";
	656	#sound-dai-cells = <0>;
	657	reg = <0x12>;
	658	};
	659
d594c977 BD	660	composite-in@20 {
	661	compatible = "adi,adv7180";
	662	reg = <0x20>;
	663	remote = <&vin1>;
	664
	665	port {
	666	adv7180: endpoint {
	667	bus-width = <8>;
	668	remote-endpoint = <&vin1ep0>;
	669	};
	670	};
	671	};
fd25cdd1 LP	672
	673	hdmi@39 {
	674	compatible = "adi,adv7511w";
	675	reg = <0x39>;
	676	interrupt-parent = <&gpio1>;
850346ec	677	interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
fd25cdd1 LP	678
	679	adi,input-depth = <8>;
	680	adi,input-colorspace = "rgb";
	681	adi,input-clock = "1x";
	682	adi,input-style = <1>;
	683	adi,input-justification = "evenly";
	684
	685	ports {
	686	#address-cells = <1>;
	687	#size-cells = <0>;
	688
	689	port@0 {
	690	reg = <0>;
	691	adv7511_in: endpoint {
	692	remote-endpoint = <&du_out_lvds0>;
	693	};
	694	};
	695
	696	port@1 {
	697	reg = <1>;
	698	adv7511_out: endpoint {
56548d0c WT	699	remote-endpoint = <&hdmi_con_out>;
	700	};
	701	};
	702	};
	703	};
	704
	705	hdmi-in@4c {
	706	compatible = "adi,adv7612";
	707	reg = <0x4c>;
	708	interrupt-parent = <&gpio1>;
	709	interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
	710	default-input = <0>;
	711
	712	ports {
	713	#address-cells = <1>;
	714	#size-cells = <0>;
	715
	716	port@0 {
	717	reg = <0>;
	718	adv7612_in: endpoint {
	719	remote-endpoint = <&hdmi_con_in>;
	720	};
	721	};
	722
	723	port@2 {
	724	reg = <2>;
	725	adv7612_out: endpoint {
	726	remote-endpoint = <&vin0ep2>;
fd25cdd1 LP	727	};
	728	};
	729	};
	730	};
e489c2a9 BD	731	};
e489c2a9 BD	732
5179ffd0	733	&iic3 {
aca4ec44	734	pinctrl-names = "default";
5179ffd0	735	pinctrl-0 = <&iic3_pins>;
aca4ec44 SH	736	status = "okay";
aca4ec44 SH	737
46dd8a80 GU	738	pmic@58 {
	739	compatible = "dlg,da9063";
	740	reg = <0x58>;
	741	interrupt-parent = <&irqc0>;
	742	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
	743	interrupt-controller;
	744
	745	rtc {
	746	compatible = "dlg,da9063-rtc";
	747	};
	748
	749	wdt {
	750	compatible = "dlg,da9063-watchdog";
	751	};
	752	};
	753
aca4ec44	754	vdd_dvfs: regulator@68 {
bd597f47	755	compatible = "dlg,da9210";
aca4ec44	756	reg = <0x68>;
ceb77479 GU	757	interrupt-parent = <&irqc0>;
ceb77479 GU	758	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
aca4ec44 SH	759
	760	regulator-min-microvolt = <1000000>;
	761	regulator-max-microvolt = <1000000>;
	762	regulator-boot-on;
	763	regulator-always-on;
	764	};
e489c2a9	765	};
d8584660 BD	766
	767	&pci0 {
	768	status = "okay";
	769	pinctrl-0 = <&usb0_pins>;
	770	pinctrl-names = "default";
	771	};
	772
	773	&pci1 {
	774	status = "okay";
	775	pinctrl-0 = <&usb1_pins>;
	776	pinctrl-names = "default";
	777	};
	778
37f7c1b0 YS	779	&xhci {
	780	status = "okay";
	781	pinctrl-0 = <&usb2_pins>;
	782	pinctrl-names = "default";
	783	};
	784
d8584660 BD	785	&pci2 {
	786	status = "okay";
	787	pinctrl-0 = <&usb2_pins>;
	788	pinctrl-names = "default";
	789	};
d594c977	790
e03074a7 YS	791	&hsusb {
	792	status = "okay";
	793	pinctrl-0 = <&hsusb_pins>;
	794	pinctrl-names = "default";
	795	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
	796	};
	797
6742cafb SS	798	&usbphy {
	799	status = "okay";
	800	};
	801
56548d0c WT	802	/* HDMI video input */
	803	&vin0 {
	804	pinctrl-0 = <&vin0_pins>;
	805	pinctrl-names = "default";
	806
	807	status = "okay";
	808
	809	port {
	810	vin0ep2: endpoint {
	811	remote-endpoint = <&adv7612_out>;
	812	bus-width = <24>;
	813	hsync-active = <0>;
	814	vsync-active = <0>;
	815	pclk-sample = <1>;
	816	data-active = <1>;
	817	};
	818	};
	819	};
	820
d594c977 BD	821	/* composite video input */
	822	&vin1 {
	823	pinctrl-0 = <&vin1_pins>;
	824	pinctrl-names = "default";
	825
fd7a8cbf	826	status = "okay";
d594c977 BD	827
	828	port {
	829	#address-cells = <1>;
	830	#size-cells = <0>;
	831
	832	vin1ep0: endpoint {
	833	remote-endpoint = <&adv7180>;
	834	bus-width = <8>;
	835	};
	836	};
	837	};
8ea7a44a KM	838
	839	&rcar_sound {
	840	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	841	pinctrl-names = "default";
	842
ad63241c	843	/* Single DAI */
8ea7a44a KM	844	#sound-dai-cells = <0>;
	845
	846	status = "okay";
	847
	848	rcar_sound,dai {
	849	dai0 {
e110c541 KM	850	playback = <&ssi0 &src2 &dvc0>;
e110c541 KM	851	capture = <&ssi1 &src3 &dvc1>;
8ea7a44a KM	852	};
	853	};
	854	};
	855
8ea7a44a	856	&ssi1 {
8ea7a44a KM	857	shared-pin;
8ea7a44a KM	858	};