[linux-2.6-block.git] / arch / arm / boot / dts / qcom-pm8941.dtsi

#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {

	pm8941_0: pm8941@0 {
		compatible = "qcom,pm8941", "qcom,spmi-pmic";
		reg = <0x0 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		rtc@6000 {
			compatible = "qcom,pm8941-rtc";
			reg = <0x6000>,
			      <0x6100>;
			reg-names = "rtc", "alarm";
			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
		};

		pwrkey@800 {
			compatible = "qcom,pm8941-pwrkey";
			reg = <0x800>;
			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
			debounce = <15625>;
			bias-pull-up;
		};

		charger@1000 {
			compatible = "qcom,pm8941-charger";
			reg = <0x1000>;
			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
			interrupt-names = "chg-done",
					  "chg-fast",
					  "chg-trkl",
					  "bat-temp-ok",
					  "bat-present",
					  "chg-gone",
					  "usb-valid",
					  "dc-valid";
		};

		pm8941_gpios: gpios@c000 {
			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
			reg = <0xc000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
				     <0 0xc1 0 IRQ_TYPE_NONE>,
				     <0 0xc2 0 IRQ_TYPE_NONE>,
				     <0 0xc3 0 IRQ_TYPE_NONE>,
				     <0 0xc4 0 IRQ_TYPE_NONE>,
				     <0 0xc5 0 IRQ_TYPE_NONE>,
				     <0 0xc6 0 IRQ_TYPE_NONE>,
				     <0 0xc7 0 IRQ_TYPE_NONE>,
				     <0 0xc8 0 IRQ_TYPE_NONE>,
				     <0 0xc9 0 IRQ_TYPE_NONE>,
				     <0 0xca 0 IRQ_TYPE_NONE>,
				     <0 0xcb 0 IRQ_TYPE_NONE>,
				     <0 0xcc 0 IRQ_TYPE_NONE>,
				     <0 0xcd 0 IRQ_TYPE_NONE>,
				     <0 0xce 0 IRQ_TYPE_NONE>,
				     <0 0xcf 0 IRQ_TYPE_NONE>,
				     <0 0xd0 0 IRQ_TYPE_NONE>,
				     <0 0xd1 0 IRQ_TYPE_NONE>,
				     <0 0xd2 0 IRQ_TYPE_NONE>,
				     <0 0xd3 0 IRQ_TYPE_NONE>,
				     <0 0xd4 0 IRQ_TYPE_NONE>,
				     <0 0xd5 0 IRQ_TYPE_NONE>,
				     <0 0xd6 0 IRQ_TYPE_NONE>,
				     <0 0xd7 0 IRQ_TYPE_NONE>,
				     <0 0xd8 0 IRQ_TYPE_NONE>,
				     <0 0xd9 0 IRQ_TYPE_NONE>,
				     <0 0xda 0 IRQ_TYPE_NONE>,
				     <0 0xdb 0 IRQ_TYPE_NONE>,
				     <0 0xdc 0 IRQ_TYPE_NONE>,
				     <0 0xdd 0 IRQ_TYPE_NONE>,
				     <0 0xde 0 IRQ_TYPE_NONE>,
				     <0 0xdf 0 IRQ_TYPE_NONE>,
				     <0 0xe0 0 IRQ_TYPE_NONE>,
				     <0 0xe1 0 IRQ_TYPE_NONE>,
				     <0 0xe2 0 IRQ_TYPE_NONE>,
				     <0 0xe3 0 IRQ_TYPE_NONE>;

			boost_bypass_n_pin: boost-bypass {
				pins = "gpio21";
				function = "normal";
			};
		};

		pm8941_mpps: mpps@a000 {
			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
			reg = <0xa000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
				     <0 0xa1 0 IRQ_TYPE_NONE>,
				     <0 0xa2 0 IRQ_TYPE_NONE>,
				     <0 0xa3 0 IRQ_TYPE_NONE>,
				     <0 0xa4 0 IRQ_TYPE_NONE>,
				     <0 0xa5 0 IRQ_TYPE_NONE>,
				     <0 0xa6 0 IRQ_TYPE_NONE>,
				     <0 0xa7 0 IRQ_TYPE_NONE>;
		};

		pm8941_temp: temp-alarm@2400 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0x2400>;
			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
			io-channel-names = "thermal";
			#thermal-sensor-cells = <0>;
		};

		pm8941_vadc: vadc@3100 {
			compatible = "qcom,spmi-vadc";
			reg = <0x3100>;
			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
			#address-cells = <1>;
			#size-cells = <0>;
			#io-channel-cells = <1>;

			die_temp {
				reg = <VADC_DIE_TEMP>;
			};
			ref_625mv {
				reg = <VADC_REF_625MV>;
			};
			ref_1250v {
				reg = <VADC_REF_1250MV>;
			};
			ref_gnd {
				reg = <VADC_GND_REF>;
			};
			ref_vdd {
				reg = <VADC_VDD_VADC>;
			};
		};

		pm8941_iadc: iadc@3600 {
			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
			reg = <0x3600>;
			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
			qcom,external-resistor-micro-ohms = <10000>;
		};

		coincell@2800 {
			compatible = "qcom,pm8941-coincell";
			reg = <0x2800>;
			status = "disabled";
		};
	};

	pm8941_1: pm8941@1 {
		compatible = "qcom,pm8941", "qcom,spmi-pmic";
		reg = <0x1 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		pm8941_wled: wled@d800 {
			compatible = "qcom,pm8941-wled";
			reg = <0xd800>;
			label = "backlight";

			status = "disabled";
		};
	};
};
Commit	Line	Data
635ecad7 II	1	#include <dt-bindings/iio/qcom,spmi-vadc.h>
635ecad7 II	2	#include <dt-bindings/interrupt-controller/irq.h>
c9127893 II	3	#include <dt-bindings/spmi/spmi.h>
	4
	5	&spmi_bus {
	6
134c544e SB	7	pm8941_0: pm8941@0 {
134c544e SB	8	compatible = "qcom,pm8941", "qcom,spmi-pmic";
c9127893 II	9	reg = <0x0 SPMI_USID>;
	10	#address-cells = <1>;
	11	#size-cells = <0>;
635ecad7 II	12
	13	rtc@6000 {
	14	compatible = "qcom,pm8941-rtc";
65d4e83e SB	15	reg = <0x6000>,
65d4e83e SB	16	<0x6100>;
635ecad7 II	17	reg-names = "rtc", "alarm";
	18	interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
	19	};
	20
	21	pwrkey@800 {
	22	compatible = "qcom,pm8941-pwrkey";
65d4e83e	23	reg = <0x800>;
635ecad7 II	24	interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
	25	debounce = <15625>;
	26	bias-pull-up;
	27	};
	28
982afd8b CC	29	charger@1000 {
982afd8b CC	30	compatible = "qcom,pm8941-charger";
65d4e83e	31	reg = <0x1000>;
982afd8b CC	32	interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
	33	<0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
	34	<0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
	35	<0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
	36	<0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
	37	<0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
	38	<0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
	39	<0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
	40	interrupt-names = "chg-done",
	41	"chg-fast",
	42	"chg-trkl",
	43	"bat-temp-ok",
	44	"bat-present",
	45	"chg-gone",
	46	"usb-valid",
	47	"dc-valid";
	48	};
	49
635ecad7	50	pm8941_gpios: gpios@c000 {
2ca9c2a4	51	compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
65d4e83e	52	reg = <0xc000>;
635ecad7 II	53	gpio-controller;
	54	#gpio-cells = <2>;
	55	interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
	56	<0 0xc1 0 IRQ_TYPE_NONE>,
	57	<0 0xc2 0 IRQ_TYPE_NONE>,
	58	<0 0xc3 0 IRQ_TYPE_NONE>,
	59	<0 0xc4 0 IRQ_TYPE_NONE>,
	60	<0 0xc5 0 IRQ_TYPE_NONE>,
	61	<0 0xc6 0 IRQ_TYPE_NONE>,
	62	<0 0xc7 0 IRQ_TYPE_NONE>,
	63	<0 0xc8 0 IRQ_TYPE_NONE>,
	64	<0 0xc9 0 IRQ_TYPE_NONE>,
	65	<0 0xca 0 IRQ_TYPE_NONE>,
	66	<0 0xcb 0 IRQ_TYPE_NONE>,
	67	<0 0xcc 0 IRQ_TYPE_NONE>,
	68	<0 0xcd 0 IRQ_TYPE_NONE>,
	69	<0 0xce 0 IRQ_TYPE_NONE>,
	70	<0 0xcf 0 IRQ_TYPE_NONE>,
	71	<0 0xd0 0 IRQ_TYPE_NONE>,
	72	<0 0xd1 0 IRQ_TYPE_NONE>,
	73	<0 0xd2 0 IRQ_TYPE_NONE>,
	74	<0 0xd3 0 IRQ_TYPE_NONE>,
	75	<0 0xd4 0 IRQ_TYPE_NONE>,
	76	<0 0xd5 0 IRQ_TYPE_NONE>,
	77	<0 0xd6 0 IRQ_TYPE_NONE>,
	78	<0 0xd7 0 IRQ_TYPE_NONE>,
	79	<0 0xd8 0 IRQ_TYPE_NONE>,
	80	<0 0xd9 0 IRQ_TYPE_NONE>,
	81	<0 0xda 0 IRQ_TYPE_NONE>,
	82	<0 0xdb 0 IRQ_TYPE_NONE>,
	83	<0 0xdc 0 IRQ_TYPE_NONE>,
	84	<0 0xdd 0 IRQ_TYPE_NONE>,
	85	<0 0xde 0 IRQ_TYPE_NONE>,
	86	<0 0xdf 0 IRQ_TYPE_NONE>,
	87	<0 0xe0 0 IRQ_TYPE_NONE>,
	88	<0 0xe1 0 IRQ_TYPE_NONE>,
	89	<0 0xe2 0 IRQ_TYPE_NONE>,
	90	<0 0xe3 0 IRQ_TYPE_NONE>;
73bae19c BS	91
	92	boost_bypass_n_pin: boost-bypass {
	93	pins = "gpio21";
	94	function = "normal";
	95	};
635ecad7 II	96	};
	97
	98	pm8941_mpps: mpps@a000 {
2ca9c2a4	99	compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
65d4e83e	100	reg = <0xa000>;
635ecad7 II	101	gpio-controller;
	102	#gpio-cells = <2>;
	103	interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
	104	<0 0xa1 0 IRQ_TYPE_NONE>,
	105	<0 0xa2 0 IRQ_TYPE_NONE>,
	106	<0 0xa3 0 IRQ_TYPE_NONE>,
	107	<0 0xa4 0 IRQ_TYPE_NONE>,
	108	<0 0xa5 0 IRQ_TYPE_NONE>,
	109	<0 0xa6 0 IRQ_TYPE_NONE>,
	110	<0 0xa7 0 IRQ_TYPE_NONE>;
	111	};
	112
	113	pm8941_temp: temp-alarm@2400 {
	114	compatible = "qcom,spmi-temp-alarm";
65d4e83e	115	reg = <0x2400>;
635ecad7 II	116	interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
	117	io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
	118	io-channel-names = "thermal";
	119	#thermal-sensor-cells = <0>;
	120	};
	121
	122	pm8941_vadc: vadc@3100 {
	123	compatible = "qcom,spmi-vadc";
65d4e83e	124	reg = <0x3100>;
635ecad7 II	125	interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
	126	#address-cells = <1>;
	127	#size-cells = <0>;
	128	#io-channel-cells = <1>;
	129
	130	die_temp {
	131	reg = <VADC_DIE_TEMP>;
	132	};
	133	ref_625mv {
	134	reg = <VADC_REF_625MV>;
	135	};
	136	ref_1250v {
	137	reg = <VADC_REF_1250MV>;
	138	};
	139	ref_gnd {
	140	reg = <VADC_GND_REF>;
	141	};
	142	ref_vdd {
	143	reg = <VADC_VDD_VADC>;
	144	};
	145	};
	146
	147	pm8941_iadc: iadc@3600 {
	148	compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
65d4e83e	149	reg = <0x3600>;
635ecad7 II	150	interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
	151	qcom,external-resistor-micro-ohms = <10000>;
	152	};
ccf97fe3 TB	153
	154	coincell@2800 {
	155	compatible = "qcom,pm8941-coincell";
	156	reg = <0x2800>;
	157	status = "disabled";
	158	};
c9127893 II	159	};
c9127893 II	160
134c544e SB	161	pm8941_1: pm8941@1 {
134c544e SB	162	compatible = "qcom,pm8941", "qcom,spmi-pmic";
c9127893 II	163	reg = <0x1 SPMI_USID>;
	164	#address-cells = <1>;
	165	#size-cells = <0>;
635ecad7	166
7026d15c	167	pm8941_wled: wled@d800 {
635ecad7	168	compatible = "qcom,pm8941-wled";
65d4e83e	169	reg = <0xd800>;
635ecad7 II	170	label = "backlight";
635ecad7 II	171
7026d15c	172	status = "disabled";
635ecad7	173	};
c9127893 II	174	};
c9127893 II	175	};