[linux-2.6-block.git] / arch / arm / boot / dts / omap5-uevm.dts

/*
 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include "omap5.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	model = "TI OMAP5 uEVM board";
	compatible = "ti,omap5-uevm", "ti,omap5";

	memory {
		device_type = "memory";
		reg = <0x80000000 0x7F000000>; /* 2032 MB */
	};

	vmmcsd_fixed: fixedregulator-mmcsd {
		compatible = "regulator-fixed";
		regulator-name = "vmmcsd_fixed";
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3000000>;
	};

	/* HS USB Host PHY on PORT 2 */
	hsusb2_phy: hsusb2_phy {
		compatible = "usb-nop-xceiv";
		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
	/**
	  * FIXME
	  * Put the right clock phandle here when available
	  *	clocks = <&auxclk1>;
	  *	clock-names = "main_clk";
	  */
		clock-frequency = <19200000>;
	};

	/* HS USB Host PHY on PORT 3 */
	hsusb3_phy: hsusb3_phy {
		compatible = "usb-nop-xceiv";
		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
	};

	leds {
		compatible = "gpio-leds";
		led@1 {
			label = "omap5:blue:usr1";
			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
			linux,default-trigger = "heartbeat";
			default-state = "off";
		};
	};
};

&omap5_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <
			&twl6040_pins
			&mcpdm_pins
			&dmic_pins
			&mcbsp1_pins
			&mcbsp2_pins
			&usbhost_pins
			&led_gpio_pins
	>;

	twl6040_pins: pinmux_twl6040_pins {
		pinctrl-single,pins = <
			0x18a (PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
		>;
	};

	mcpdm_pins: pinmux_mcpdm_pins {
		pinctrl-single,pins = <
			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
		>;
	};

	dmic_pins: pinmux_dmic_pins {
		pinctrl-single,pins = <
			0x144 (PIN_INPUT | MUX_MODE0)		/* abedmic_din1.abedmic_din1 */
			0x146 (PIN_INPUT | MUX_MODE0)		/* abedmic_din2.abedmic_din2 */
			0x148 (PIN_INPUT | MUX_MODE0)		/* abedmic_din3.abedmic_din3 */
			0x14a (PIN_OUTPUT | MUX_MODE0)		/* abedmic_clk1.abedmic_clk1 */
		>;
	};

	mcbsp1_pins: pinmux_mcbsp1_pins {
		pinctrl-single,pins = <
			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
		>;
	};

	mcbsp2_pins: pinmux_mcbsp2_pins {
		pinctrl-single,pins = <
			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c5_pins: pinmux_i2c5_pins {
		pinctrl-single,pins = <
			0x184 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
		>;
	};

	mcspi2_pins: pinmux_mcspi2_pins {
		pinctrl-single,pins = <
			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
		>;
	};

	mcspi3_pins: pinmux_mcspi3_pins {
		pinctrl-single,pins = <
			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
		>;
	};

	mcspi4_pins: pinmux_mcspi4_pins {
		pinctrl-single,pins = <
			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
		>;
	};

	usbhost_pins: pinmux_usbhost_pins {
		pinctrl-single,pins = <
			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */

			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */

			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
		>;
	};

	led_gpio_pins: pinmux_led_gpio_pins {
		pinctrl-single,pins = <
			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
		>;
	};

	uart1_pins: pinmux_uart1_pins {
		pinctrl-single,pins = <
			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
		>;
	};

	uart5_pins: pinmux_uart5_pins {
		pinctrl-single,pins = <
			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
		>;
	};

};

&omap5_pmx_wkup {
	pinctrl-names = "default";
	pinctrl-0 = <
			&usbhost_wkup_pins
	>;

	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
		pinctrl-single,pins = <
			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
		>;
	};
};

&mmc1 {
	vmmc-supply = <&ldo9_reg>;
	bus-width = <4>;
};

&mmc2 {
	vmmc-supply = <&vmmcsd_fixed>;
	bus-width = <8>;
	ti,non-removable;
};

&mmc3 {
	bus-width = <4>;
	ti,non-removable;
};

&mmc4 {
	status = "disabled";
};

&mmc5 {
	status = "disabled";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	palmas: palmas@48 {
		compatible = "ti,palmas";
		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
		interrupt-parent = <&gic>;
		reg = <0x48>;
		interrupt-controller;
		#interrupt-cells = <2>;
		ti,system-power-controller;

		extcon_usb3: palmas_usb {
			compatible = "ti,palmas-usb-vid";
			ti,enable-vbus-detection;
			ti,enable-id-detection;
			ti,wakeup;
		};

		palmas_pmic {
			compatible = "ti,palmas-pmic";
			interrupt-parent = <&palmas>;
			interrupts = <14 IRQ_TYPE_NONE>;
			interrupt-name = "short-irq";

			ti,ldo6-vibrator;

			regulators {
				smps123_reg: smps123 {
					/* VDD_OPP_MPU */
					regulator-name = "smps123";
					regulator-min-microvolt = < 600000>;
					regulator-max-microvolt = <1500000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps45_reg: smps45 {
					/* VDD_OPP_MM */
					regulator-name = "smps45";
					regulator-min-microvolt = < 600000>;
					regulator-max-microvolt = <1310000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps6_reg: smps6 {
					/* VDD_DDR3 - over VDD_SMPS6 */
					regulator-name = "smps6";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps7_reg: smps7 {
					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
					regulator-name = "smps7";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps8_reg: smps8 {
					/* VDD_OPP_CORE */
					regulator-name = "smps8";
					regulator-min-microvolt = < 600000>;
					regulator-max-microvolt = <1310000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps9_reg: smps9 {
					/* VDDA_2v1_AUD over VDD_2v1 */
					regulator-name = "smps9";
					regulator-min-microvolt = <2100000>;
					regulator-max-microvolt = <2100000>;
					ti,smps-range = <0x80>;
				};

				smps10_out2_reg: smps10_out2 {
					/* VBUS_5V_OTG */
					regulator-name = "smps10_out2";
					regulator-min-microvolt = <5000000>;
					regulator-max-microvolt = <5000000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps10_out1_reg: smps10_out1 {
					/* VBUS_5V_OTG */
					regulator-name = "smps10_out1";
					regulator-min-microvolt = <5000000>;
					regulator-max-microvolt = <5000000>;
				};

				ldo1_reg: ldo1 {
					/* VDDAPHY_CAM: vdda_csiport */
					regulator-name = "ldo1";
					regulator-min-microvolt = <1500000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo2_reg: ldo2 {
					/* VCC_2V8_DISP: Does not go anywhere */
					regulator-name = "ldo2";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
					/* Unused */
					status = "disabled";
				};

				ldo3_reg: ldo3 {
					/* VDDAPHY_MDM: vdda_lli */
					regulator-name = "ldo3";
					regulator-min-microvolt = <1500000>;
					regulator-max-microvolt = <1500000>;
					regulator-boot-on;
					/* Only if Modem is used */
					status = "disabled";
				};

				ldo4_reg: ldo4 {
					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
					regulator-name = "ldo4";
					regulator-min-microvolt = <1500000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo5_reg: ldo5 {
					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
					regulator-name = "ldo5";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo6_reg: ldo6 {
					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
					regulator-name = "ldo6";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo7_reg: ldo7 {
					/* VDD_VPP: vpp1 */
					regulator-name = "ldo7";
					regulator-min-microvolt = <2000000>;
					regulator-max-microvolt = <2000000>;
					/* Only for efuse reprograming! */
					status = "disabled";
				};

				ldo8_reg: ldo8 {
					/* VDD_3v0: Does not go anywhere */
					regulator-name = "ldo8";
					regulator-min-microvolt = <3000000>;
					regulator-max-microvolt = <3000000>;
					regulator-boot-on;
					/* Unused */
					status = "disabled";
				};

				ldo9_reg: ldo9 {
					/* VCC_DV_SDIO: vdds_sdcard */
					regulator-name = "ldo9";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <3000000>;
					regulator-boot-on;
				};

				ldoln_reg: ldoln {
					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
					regulator-name = "ldoln";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldousb_reg: ldousb {
					/* VDDA_3V_USB: VDDA_USBHS33 */
					regulator-name = "ldousb";
					regulator-min-microvolt = <3250000>;
					regulator-max-microvolt = <3250000>;
					regulator-always-on;
					regulator-boot-on;
				};

				regen3_reg: regen3 {
					/* REGEN3 controls LDO9 supply to card */
					regulator-name = "regen3";
					regulator-always-on;
					regulator-boot-on;
				};
			};
		};
	};
};

&i2c5 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c5_pins>;

	clock-frequency = <400000>;
};

&mcbsp3 {
	status = "disabled";
};

&usbhshost {
	port2-mode = "ehci-hsic";
	port3-mode = "ehci-hsic";
};

&usbhsehci {
	phys = <0 &hsusb2_phy &hsusb3_phy>;
};

&usb3 {
	extcon = <&extcon_usb3>;
	vbus-supply = <&smps10_out1_reg>;
};

&mcspi1 {

};

&mcspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi2_pins>;
};

&mcspi3 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi3_pins>;
};

&mcspi4 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi4_pins>;
};

&uart1 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart1_pins>;
};

&uart3 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart3_pins>;
};

&uart5 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart5_pins>;
};

&cpu0 {
	cpu0-supply = <&smps123_reg>;
};
Commit	Line	Data
6b5de091	1	/*
fa63d037	2	* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
6b5de091 S	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8	/dts-v1/;
	9
98ef7957	10	#include "omap5.dtsi"
e00c27ef K	11	#include <dt-bindings/interrupt-controller/irq.h>
e00c27ef K	12	#include <dt-bindings/interrupt-controller/arm-gic.h>
6b5de091 S	13
6b5de091 S	14	/ {
fa63d037 S	15	model = "TI OMAP5 uEVM board";
fa63d037 S	16	compatible = "ti,omap5-uevm", "ti,omap5";
6b5de091 S	17
	18	memory {
	19	device_type = "memory";
03178c66	20	reg = <0x80000000 0x7F000000>; /* 2032 MB */
6b5de091	21	};
5dd18b01 B	22
	23	vmmcsd_fixed: fixedregulator-mmcsd {
	24	compatible = "regulator-fixed";
	25	regulator-name = "vmmcsd_fixed";
	26	regulator-min-microvolt = <3000000>;
	27	regulator-max-microvolt = <3000000>;
	28	};
5449fbc2	29
ed7f8e8a RQ	30	/* HS USB Host PHY on PORT 2 */
	31	hsusb2_phy: hsusb2_phy {
	32	compatible = "usb-nop-xceiv";
8ae9b595	33	reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
153030c2 RQ	34	/**
	35	* FIXME
	36	* Put the right clock phandle here when available
	37	* clocks = <&auxclk1>;
	38	* clock-names = "main_clk";
	39	*/
	40	clock-frequency = <19200000>;
ed7f8e8a RQ	41	};
ed7f8e8a RQ	42
ed7f8e8a RQ	43	/* HS USB Host PHY on PORT 3 */
	44	hsusb3_phy: hsusb3_phy {
	45	compatible = "usb-nop-xceiv";
8ae9b595	46	reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
ed7f8e8a RQ	47	};
ed7f8e8a RQ	48
66155302 DM	49	leds {
	50	compatible = "gpio-leds";
	51	led@1 {
	52	label = "omap5:blue:usr1";
	53	gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
	54	linux,default-trigger = "heartbeat";
	55	default-state = "off";
	56	};
	57	};
5dd18b01 B	58	};
5dd18b01 B	59
8bbacc55 PU	60	&omap5_pmx_core {
	61	pinctrl-names = "default";
	62	pinctrl-0 = <
	63	&twl6040_pins
	64	&mcpdm_pins
	65	&dmic_pins
	66	&mcbsp1_pins
	67	&mcbsp2_pins
ed7f8e8a	68	&usbhost_pins
66155302	69	&led_gpio_pins
8bbacc55 PU	70	>;
	71
	72	twl6040_pins: pinmux_twl6040_pins {
	73	pinctrl-single,pins = <
bcd3cca7	74	0x18a (PIN_OUTPUT \| MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
8bbacc55 PU	75	>;
	76	};
	77
	78	mcpdm_pins: pinmux_mcpdm_pins {
	79	pinctrl-single,pins = <
bcd3cca7 FV	80	0x142 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_clks.abe_clks */
	81	0x15c (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
	82	0x15e (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
	83	0x160 (PIN_INPUT_PULLUP \| MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
	84	0x162 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
8bbacc55 PU	85	>;
	86	};
	87
	88	dmic_pins: pinmux_dmic_pins {
	89	pinctrl-single,pins = <
bcd3cca7 FV	90	0x144 (PIN_INPUT \| MUX_MODE0) /* abedmic_din1.abedmic_din1 */
	91	0x146 (PIN_INPUT \| MUX_MODE0) /* abedmic_din2.abedmic_din2 */
	92	0x148 (PIN_INPUT \| MUX_MODE0) /* abedmic_din3.abedmic_din3 */
	93	0x14a (PIN_OUTPUT \| MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */
8bbacc55 PU	94	>;
	95	};
	96
	97	mcbsp1_pins: pinmux_mcbsp1_pins {
	98	pinctrl-single,pins = <
bcd3cca7 FV	99	0x14c (PIN_INPUT \| MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
	100	0x14e (PIN_OUTPUT_PULLDOWN \| MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
	101	0x150 (PIN_INPUT \| MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
	102	0x152 (PIN_INPUT_PULLDOWN \| MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
8bbacc55 PU	103	>;
	104	};
	105
	106	mcbsp2_pins: pinmux_mcbsp2_pins {
	107	pinctrl-single,pins = <
bcd3cca7 FV	108	0x154 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
	109	0x156 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
	110	0x158 (PIN_INPUT \| MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
	111	0x15a (PIN_INPUT \| MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
8bbacc55 PU	112	>;
8bbacc55 PU	113	};
9be495c4	114
bcd3cca7 FV	115	i2c1_pins: pinmux_i2c1_pins {
	116	pinctrl-single,pins = <
	117	0x1b2 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
	118	0x1b4 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
	119	>;
	120	};
9be495c4	121
9be495c4 SP	122	i2c5_pins: pinmux_i2c5_pins {
9be495c4 SP	123	pinctrl-single,pins = <
bcd3cca7 FV	124	0x184 (PIN_INPUT \| MUX_MODE0) /* i2c5_scl */
bcd3cca7 FV	125	0x186 (PIN_INPUT \| MUX_MODE0) /* i2c5_sda */
9be495c4 SP	126	>;
9be495c4 SP	127	};
392adaf7 SP	128
	129	mcspi2_pins: pinmux_mcspi2_pins {
	130	pinctrl-single,pins = <
bcd3cca7 FV	131	0xbc (PIN_INPUT \| MUX_MODE0) /* mcspi2_clk */
	132	0xbe (PIN_INPUT \| MUX_MODE0) /* mcspi2_simo */
	133	0xc0 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mcspi2_somi */
05bc85d1	134	0xc2 (PIN_OUTPUT \| MUX_MODE0) /* mcspi2_cs0 */
392adaf7 SP	135	>;
	136	};
	137
	138	mcspi3_pins: pinmux_mcspi3_pins {
	139	pinctrl-single,pins = <
05bc85d1 EW	140	0x78 (PIN_INPUT \| MUX_MODE1) /* mcspi3_somi */
	141	0x7a (PIN_INPUT \| MUX_MODE1) /* mcspi3_cs0 */
	142	0x7c (PIN_INPUT \| MUX_MODE1) /* mcspi3_simo */
	143	0x7e (PIN_INPUT \| MUX_MODE1) /* mcspi3_clk */
392adaf7 SP	144	>;
	145	};
	146
	147	mcspi4_pins: pinmux_mcspi4_pins {
	148	pinctrl-single,pins = <
05bc85d1 EW	149	0x164 (PIN_INPUT \| MUX_MODE1) /* mcspi4_clk */
	150	0x168 (PIN_INPUT \| MUX_MODE1) /* mcspi4_simo */
	151	0x16a (PIN_INPUT \| MUX_MODE1) /* mcspi4_somi */
	152	0x16c (PIN_INPUT \| MUX_MODE1) /* mcspi4_cs0 */
392adaf7 SP	153	>;
392adaf7 SP	154	};
ed7f8e8a RQ	155
	156	usbhost_pins: pinmux_usbhost_pins {
	157	pinctrl-single,pins = <
	158	0x84 (PIN_INPUT \| MUX_MODE0) /* usbb2_hsic_strobe */
	159	0x86 (PIN_INPUT \| MUX_MODE0) /* usbb2_hsic_data */
	160
	161	0x19e (PIN_INPUT \| MUX_MODE0) /* usbb3_hsic_strobe */
	162	0x1a0 (PIN_INPUT \| MUX_MODE0) /* usbb3_hsic_data */
	163
	164	0x70 (PIN_OUTPUT \| MUX_MODE6) /* gpio3_80 HUB_NRESET */
	165	0x6e (PIN_OUTPUT \| MUX_MODE6) /* gpio3_79 ETH_NRESET */
	166	>;
	167	};
66155302 DM	168
	169	led_gpio_pins: pinmux_led_gpio_pins {
	170	pinctrl-single,pins = <
	171	0x196 (PIN_OUTPUT \| MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
	172	>;
	173	};
ed22fee3 SP	174
	175	uart1_pins: pinmux_uart1_pins {
	176	pinctrl-single,pins = <
	177	0x60 (PIN_OUTPUT \| MUX_MODE0) /* uart1_tx.uart1_cts */
	178	0x62 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart1_tx.uart1_cts */
	179	0x64 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart1_rx.uart1_rts */
	180	0x66 (PIN_OUTPUT \| MUX_MODE0) /* uart1_rx.uart1_rts */
	181	>;
	182	};
	183
	184	uart3_pins: pinmux_uart3_pins {
	185	pinctrl-single,pins = <
	186	0x19a (PIN_OUTPUT \| MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
	187	0x19c (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
	188	>;
	189	};
	190
	191	uart5_pins: pinmux_uart5_pins {
	192	pinctrl-single,pins = <
	193	0x170 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart5_rx.uart5_rx */
	194	0x172 (PIN_OUTPUT \| MUX_MODE0) /* uart5_tx.uart5_tx */
	195	0x174 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart5_cts.uart5_rts */
	196	0x176 (PIN_OUTPUT \| MUX_MODE0) /* uart5_cts.uart5_rts */
	197	>;
	198	};
	199
ed7f8e8a RQ	200	};
	201
	202	&omap5_pmx_wkup {
	203	pinctrl-names = "default";
	204	pinctrl-0 = <
	205	&usbhost_wkup_pins
	206	>;
	207
	208	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
	209	pinctrl-single,pins = <
	210	0x1A (PIN_OUTPUT \| MUX_MODE0) /* fref_clk1_out, USB hub clk */
	211	>;
	212	};
8bbacc55 PU	213	};
8bbacc55 PU	214
5dd18b01	215	&mmc1 {
e18235a6	216	vmmc-supply = <&ldo9_reg>;
5dd18b01 B	217	bus-width = <4>;
	218	};
	219
	220	&mmc2 {
	221	vmmc-supply = <&vmmcsd_fixed>;
	222	bus-width = <8>;
	223	ti,non-removable;
	224	};
	225
	226	&mmc3 {
	227	bus-width = <4>;
	228	ti,non-removable;
	229	};
	230
	231	&mmc4 {
	232	status = "disabled";
	233	};
	234
	235	&mmc5 {
	236	status = "disabled";
6b5de091	237	};
08f3e21b	238
9be495c4 SP	239	&i2c1 {
	240	pinctrl-names = "default";
	241	pinctrl-0 = <&i2c1_pins>;
	242
	243	clock-frequency = <400000>;
e00c27ef K	244
	245	palmas: palmas@48 {
	246	compatible = "ti,palmas";
	247	interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
	248	interrupt-parent = <&gic>;
	249	reg = <0x48>;
	250	interrupt-controller;
	251	#interrupt-cells = <2>;
86583375	252	ti,system-power-controller;
e00c27ef	253
e3a412c9 FB	254	extcon_usb3: palmas_usb {
	255	compatible = "ti,palmas-usb-vid";
	256	ti,enable-vbus-detection;
	257	ti,enable-id-detection;
	258	ti,wakeup;
	259	};
	260
e00c27ef K	261	palmas_pmic {
	262	compatible = "ti,palmas-pmic";
	263	interrupt-parent = <&palmas>;
	264	interrupts = <14 IRQ_TYPE_NONE>;
	265	interrupt-name = "short-irq";
	266
	267	ti,ldo6-vibrator;
	268
	269	regulators {
	270	smps123_reg: smps123 {
3709d323	271	/* VDD_OPP_MPU */
e00c27ef K	272	regulator-name = "smps123";
	273	regulator-min-microvolt = < 600000>;
	274	regulator-max-microvolt = <1500000>;
	275	regulator-always-on;
	276	regulator-boot-on;
	277	};
	278
	279	smps45_reg: smps45 {
3709d323	280	/* VDD_OPP_MM */
e00c27ef K	281	regulator-name = "smps45";
	282	regulator-min-microvolt = < 600000>;
	283	regulator-max-microvolt = <1310000>;
	284	regulator-always-on;
	285	regulator-boot-on;
	286	};
	287
	288	smps6_reg: smps6 {
3709d323	289	/* VDD_DDR3 - over VDD_SMPS6 */
e00c27ef K	290	regulator-name = "smps6";
	291	regulator-min-microvolt = <1200000>;
	292	regulator-max-microvolt = <1200000>;
	293	regulator-always-on;
	294	regulator-boot-on;
	295	};
	296
	297	smps7_reg: smps7 {
3709d323	298	/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
e00c27ef K	299	regulator-name = "smps7";
	300	regulator-min-microvolt = <1800000>;
	301	regulator-max-microvolt = <1800000>;
	302	regulator-always-on;
	303	regulator-boot-on;
	304	};
	305
	306	smps8_reg: smps8 {
3709d323	307	/* VDD_OPP_CORE */
e00c27ef K	308	regulator-name = "smps8";
	309	regulator-min-microvolt = < 600000>;
	310	regulator-max-microvolt = <1310000>;
	311	regulator-always-on;
	312	regulator-boot-on;
	313	};
	314
	315	smps9_reg: smps9 {
3709d323	316	/* VDDA_2v1_AUD over VDD_2v1 */
e00c27ef K	317	regulator-name = "smps9";
	318	regulator-min-microvolt = <2100000>;
	319	regulator-max-microvolt = <2100000>;
e00c27ef K	320	ti,smps-range = <0x80>;
	321	};
	322
9448996c	323	smps10_out2_reg: smps10_out2 {
3709d323	324	/* VBUS_5V_OTG */
9448996c KVA	325	regulator-name = "smps10_out2";
	326	regulator-min-microvolt = <5000000>;
	327	regulator-max-microvolt = <5000000>;
	328	regulator-always-on;
	329	regulator-boot-on;
	330	};
	331
	332	smps10_out1_reg: smps10_out1 {
	333	/* VBUS_5V_OTG */
	334	regulator-name = "smps10_out1";
e00c27ef K	335	regulator-min-microvolt = <5000000>;
e00c27ef K	336	regulator-max-microvolt = <5000000>;
e00c27ef K	337	};
	338
	339	ldo1_reg: ldo1 {
3709d323	340	/* VDDAPHY_CAM: vdda_csiport */
e00c27ef	341	regulator-name = "ldo1";
e18235a6 NM	342	regulator-min-microvolt = <1500000>;
e18235a6 NM	343	regulator-max-microvolt = <1800000>;
e00c27ef K	344	};
	345
	346	ldo2_reg: ldo2 {
3709d323	347	/* VCC_2V8_DISP: Does not go anywhere */
e00c27ef	348	regulator-name = "ldo2";
bd3c5544 NM	349	regulator-min-microvolt = <2800000>;
	350	regulator-max-microvolt = <2800000>;
	351	/* Unused */
	352	status = "disabled";
e00c27ef K	353	};
	354
	355	ldo3_reg: ldo3 {
3709d323	356	/* VDDAPHY_MDM: vdda_lli */
e00c27ef	357	regulator-name = "ldo3";
e18235a6 NM	358	regulator-min-microvolt = <1500000>;
e18235a6 NM	359	regulator-max-microvolt = <1500000>;
e00c27ef	360	regulator-boot-on;
e18235a6 NM	361	/* Only if Modem is used */
e18235a6 NM	362	status = "disabled";
e00c27ef K	363	};
	364
	365	ldo4_reg: ldo4 {
3709d323	366	/* VDDAPHY_DISP: vdda_dsiport/hdmi */
e00c27ef	367	regulator-name = "ldo4";
e18235a6 NM	368	regulator-min-microvolt = <1500000>;
e18235a6 NM	369	regulator-max-microvolt = <1800000>;
e00c27ef K	370	};
	371
	372	ldo5_reg: ldo5 {
3709d323	373	/* VDDA_1V8_PHY: usb/sata/hdmi.. */
e00c27ef K	374	regulator-name = "ldo5";
	375	regulator-min-microvolt = <1800000>;
	376	regulator-max-microvolt = <1800000>;
	377	regulator-always-on;
	378	regulator-boot-on;
	379	};
	380
	381	ldo6_reg: ldo6 {
3709d323	382	/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
e00c27ef	383	regulator-name = "ldo6";
e18235a6 NM	384	regulator-min-microvolt = <1200000>;
e18235a6 NM	385	regulator-max-microvolt = <1200000>;
e00c27ef K	386	regulator-always-on;
	387	regulator-boot-on;
	388	};
	389
	390	ldo7_reg: ldo7 {
3709d323	391	/* VDD_VPP: vpp1 */
e00c27ef	392	regulator-name = "ldo7";
e18235a6 NM	393	regulator-min-microvolt = <2000000>;
	394	regulator-max-microvolt = <2000000>;
	395	/* Only for efuse reprograming! */
	396	status = "disabled";
e00c27ef K	397	};
	398
	399	ldo8_reg: ldo8 {
3709d323	400	/* VDD_3v0: Does not go anywhere */
e00c27ef	401	regulator-name = "ldo8";
bd3c5544 NM	402	regulator-min-microvolt = <3000000>;
bd3c5544 NM	403	regulator-max-microvolt = <3000000>;
e00c27ef	404	regulator-boot-on;
bd3c5544 NM	405	/* Unused */
bd3c5544 NM	406	status = "disabled";
e00c27ef K	407	};
	408
	409	ldo9_reg: ldo9 {
3709d323	410	/* VCC_DV_SDIO: vdds_sdcard */
e00c27ef K	411	regulator-name = "ldo9";
e00c27ef K	412	regulator-min-microvolt = <1800000>;
e18235a6	413	regulator-max-microvolt = <3000000>;
e00c27ef K	414	regulator-boot-on;
	415	};
	416
	417	ldoln_reg: ldoln {
3709d323	418	/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
e00c27ef K	419	regulator-name = "ldoln";
	420	regulator-min-microvolt = <1800000>;
	421	regulator-max-microvolt = <1800000>;
	422	regulator-always-on;
	423	regulator-boot-on;
	424	};
	425
	426	ldousb_reg: ldousb {
3709d323	427	/* VDDA_3V_USB: VDDA_USBHS33 */
e00c27ef K	428	regulator-name = "ldousb";
	429	regulator-min-microvolt = <3250000>;
	430	regulator-max-microvolt = <3250000>;
	431	regulator-always-on;
	432	regulator-boot-on;
	433	};
e18235a6 NM	434
	435	regen3_reg: regen3 {
	436	/* REGEN3 controls LDO9 supply to card */
	437	regulator-name = "regen3";
	438	regulator-always-on;
	439	regulator-boot-on;
	440	};
e00c27ef K	441	};
	442	};
	443	};
9be495c4 SP	444	};
9be495c4 SP	445
9be495c4 SP	446	&i2c5 {
	447	pinctrl-names = "default";
	448	pinctrl-0 = <&i2c5_pins>;
	449
	450	clock-frequency = <400000>;
	451	};
	452
42601d58 PU	453	&mcbsp3 {
	454	status = "disabled";
	455	};
4d2750f3	456
ed7f8e8a RQ	457	&usbhshost {
	458	port2-mode = "ehci-hsic";
	459	port3-mode = "ehci-hsic";
	460	};
	461
	462	&usbhsehci {
	463	phys = <0 &hsusb2_phy &hsusb3_phy>;
	464	};
	465
e3a412c9 FB	466	&usb3 {
	467	extcon = <&extcon_usb3>;
	468	vbus-supply = <&smps10_out1_reg>;
	469	};
	470
392adaf7 SP	471	&mcspi1 {
	472
	473	};
	474
	475	&mcspi2 {
	476	pinctrl-names = "default";
	477	pinctrl-0 = <&mcspi2_pins>;
	478	};
	479
	480	&mcspi3 {
	481	pinctrl-names = "default";
	482	pinctrl-0 = <&mcspi3_pins>;
	483	};
	484
	485	&mcspi4 {
	486	pinctrl-names = "default";
	487	pinctrl-0 = <&mcspi4_pins>;
	488	};
ed22fee3 SP	489
	490	&uart1 {
	491	pinctrl-names = "default";
	492	pinctrl-0 = <&uart1_pins>;
	493	};
	494
	495	&uart3 {
	496	pinctrl-names = "default";
	497	pinctrl-0 = <&uart3_pins>;
	498	};
	499
	500	&uart5 {
	501	pinctrl-names = "default";
	502	pinctrl-0 = <&uart5_pins>;
	503	};
b8981d71 NM	504
	505	&cpu0 {
	506	cpu0-supply = <&smps123_reg>;
	507	};