projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 9f642b5c DL |
1 | /* |
| 2 | * Suppport for CompuLab SBC-T54 with CM-T54 | |
| 3 | */ | |
| 4 | ||
| 5 | #include "omap5-cm-t54.dts" | |
| 6 | ||
| 7 | / { | |
| 8 | model = "CompuLab SBC-T54 with CM-T54"; | |
| 9 | compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; | |
| 10 | }; | |
| 11 | ||
| 12 | &omap5_pmx_core { | |
| 13 | i2c4_pins: pinmux_i2c4_pins { | |
| 14 | pinctrl-single,pins = < | |
| 4b466297 JE |
15 | OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
| 16 | OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ | |
| 9f642b5c DL |
17 | >; |
| 18 | }; | |
| 19 | ||
| 20 | mmc1_aux_pins: pinmux_mmc1_aux_pins { | |
| 21 | pinctrl-single,pins = < | |
| 4b466297 JE |
22 | OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */ |
| 23 | OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */ | |
| 9f642b5c DL |
24 | >; |
| 25 | }; | |
| 26 | }; | |
| 27 | ||
| 28 | &mmc1 { | |
| 29 | pinctrl-names = "default"; | |
| 30 | pinctrl-0 = < | |
| 31 | &mmc1_pins | |
| 32 | &mmc1_aux_pins | |
| 33 | >; | |
| 34 | cd-inverted; | |
| 35 | wp-inverted; | |
| 36 | cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */ | |
| 37 | wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */ | |
| 38 | }; | |
| 39 | ||
| 40 | &i2c4 { | |
| 41 | pinctrl-names = "default"; | |
| 42 | pinctrl-0 = <&i2c4_pins>; | |
| 43 | ||
| 44 | clock-frequency = <400000>; | |
| 45 | ||
| 46 | at24@50 { | |
| 47 | compatible = "at24,24c02"; | |
| 48 | pagesize = <16>; | |
| 49 | reg = <0x50>; | |
| 50 | }; | |
| 51 | }; |