[linux-block.git] / arch / arm / boot / dts / omap4-panda-common.dtsi

/*
 * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include "elpida_ecb240abacn.dtsi"

/ {
	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x40000000>; /* 1 GB */
	};

	aliases {
		display0 = &dvi0;
		display1 = &hdmi0;
		ethernet = &ethernet;
	};

	leds: leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <
			&led_wkgpio_pins
		>;

		heartbeat {
			label = "pandaboard::status1";
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};

		mmc {
			label = "pandaboard::status2";
			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
		};
	};

	sound: sound {
		compatible = "ti,abe-twl6040";
		ti,model = "PandaBoard";

		ti,mclk-freq = <38400000>;

		ti,mcpdm = <&mcpdm>;

		ti,twl6040 = <&twl6040>;

		/* Audio routing */
		ti,audio-routing =
			"Headset Stereophone", "HSOL",
			"Headset Stereophone", "HSOR",
			"Ext Spk", "HFL",
			"Ext Spk", "HFR",
			"Line Out", "AUXL",
			"Line Out", "AUXR",
			"HSMIC", "Headset Mic",
			"Headset Mic", "Headset Mic Bias",
			"AFML", "Line In",
			"AFMR", "Line In";
	};

	/* HS USB Port 1 Power */
	hsusb1_power: hsusb1_power_reg {
		compatible = "regulator-fixed";
		regulator-name = "hsusb1_vbus";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
		startup-delay-us = <70000>;
		enable-active-high;
		/*
		 * boot-on is required along with always-on as the
		 * regulator framework doesn't enable the regulator
		 * if boot-on is not there.
		 */
		regulator-always-on;
		regulator-boot-on;
	};

	/* HS USB Host PHY on PORT 1 */
	hsusb1_phy: hsusb1_phy {
		compatible = "usb-nop-xceiv";
		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
		vcc-supply = <&hsusb1_power>;
		clocks = <&auxclk3_ck>;
		clock-names = "main_clk";
		clock-frequency = <19200000>;
	};

	/* regulator for wl12xx on sdio5 */
	wl12xx_vmmc: wl12xx_vmmc {
		pinctrl-names = "default";
		pinctrl-0 = <&wl12xx_gpio>;
		compatible = "regulator-fixed";
		regulator-name = "vwl1271";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <70000>;
		enable-active-high;
	};

	tfp410: encoder0 {
		compatible = "ti,tfp410";
		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tfp410_in: endpoint {
					remote-endpoint = <&dpi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tfp410_out: endpoint {
					remote-endpoint = <&dvi_connector_in>;
				};
			};
		};
	};

	dvi0: connector0 {
		compatible = "dvi-connector";
		label = "dvi";

		digital;

		ddc-i2c-bus = <&i2c3>;

		port {
			dvi_connector_in: endpoint {
				remote-endpoint = <&tfp410_out>;
			};
		};
	};

	tpd12s015: encoder1 {
		compatible = "ti,tpd12s015";

		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tpd12s015_in: endpoint {
					remote-endpoint = <&hdmi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tpd12s015_out: endpoint {
					remote-endpoint = <&hdmi_connector_in>;
				};
			};
		};
	};

	hdmi0: connector1 {
		compatible = "hdmi-connector";
		label = "hdmi";

		type = "a";

		port {
			hdmi_connector_in: endpoint {
				remote-endpoint = <&tpd12s015_out>;
			};
		};
	};
};

&omap4_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <
			&dss_dpi_pins
			&tfp410_pins
			&dss_hdmi_pins
			&tpd12s015_pins
			&hsusbb1_pins
	>;

	twl6040_pins: pinmux_twl6040_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
		>;
	};

	mcpdm_pins: pinmux_mcpdm_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
		>;
	};

	mcbsp1_pins: pinmux_mcbsp1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
		>;
	};

	dss_dpi_pins: pinmux_dss_dpi_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */

			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */

			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
		>;
	};

	tfp410_pins: pinmux_tfp410_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
		>;
	};

	dss_hdmi_pins: pinmux_dss_hdmi_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
		>;
	};

	tpd12s015_pins: pinmux_tpd12s015_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
		>;
	};

	hsusbb1_pins: pinmux_hsusbb1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	i2c4_pins: pinmux_i2c4_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
		>;
	};

	/*
	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
	 */
	wl12xx_gpio: pinmux_wl12xx_gpio {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
		>;
	};

	/* wl12xx GPIO inputs and SDIO pins */
	wl12xx_pins: pinmux_wl12xx_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
		>;
	};
};

&omap4_pmx_wkup {
	led_wkgpio_pins: pinmux_leds_wkpins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	twl: twl@48 {
		reg = <0x48>;
		/* IRQ# = 7 */
		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
	};

	twl6040: twl@4b {
		compatible = "ti,twl6040";
		#clock-cells = <0>;
		reg = <0x4b>;

		pinctrl-names = "default";
		pinctrl-0 = <&twl6040_pins>;

		/* IRQ# = 119 */
		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */

		vio-supply = <&v1v8>;
		v2v1-supply = <&v2v1>;
		enable-active-high;
	};
};

#include "twl6030.dtsi"
#include "twl6030_omap4.dtsi"

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <400000>;
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <100000>;

	/*
	 * Display monitor features are burnt in their EEPROM as EDID data.
	 * The EEPROM is connected as I2C slave device.
	 */
	eeprom@50 {
		compatible = "ti,eeprom";
		reg = <0x50>;
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	vmmc-supply = <&vmmc>;
	bus-width = <8>;
};

&mmc2 {
	status = "disabled";
};

&mmc3 {
	status = "disabled";
};

&mmc4 {
	status = "disabled";
};

&mmc5 {
	pinctrl-names = "default";
	pinctrl-0 = <&wl12xx_pins>;
	vmmc-supply = <&wl12xx_vmmc>;
	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core 0x10e>;
	non-removable;
	bus-width = <4>;
	cap-power-off-card;

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1271";
		reg = <2>;
		interrupt-parent = <&gpio2>;
		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
		ref-clock-frequency = <38400000>;
	};
};

&emif1 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&emif2 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&mcbsp1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp1_pins>;
	status = "okay";
};

&mcpdm {
	pinctrl-names = "default";
	pinctrl-0 = <&mcpdm_pins>;

	clocks = <&twl6040>;
	clock-names = "pdmclk";

	status = "okay";
};

&twl_usb_comparator {
	usb-supply = <&vusb>;
};

&uart2 {
	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART2_RX>;
};

&uart3 {
	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART3_RX>;
};

&uart4 {
	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART4_RX>;
};

&usb_otg_hs {
	interface-type = <1>;
	mode = <3>;
	power = <50>;
};

&usbhshost {
	port1-mode = "ehci-phy";
};

&usbhsehci {
	phys = <&hsusb1_phy>;

	#address-cells = <1>;
	#size-cells = <0>;

	hub@1 {
		compatible = "usb424,9514";
		reg = <1>;
		#address-cells = <1>;
		#size-cells = <0>;

		ethernet: usbether@1 {
			compatible = "usb424,ec00";
			reg = <1>;
		};
	};
};

&dss {
	status = "ok";

	port {
		dpi_out: endpoint {
			remote-endpoint = <&tfp410_in>;
			data-lines = <24>;
		};
	};
};

&dsi2 {
	status = "ok";
	vdd-supply = <&vcxio>;
};

&hdmi {
	status = "ok";
	vdda-supply = <&vdac>;

	port {
		hdmi_out: endpoint {
			remote-endpoint = <&tpd12s015_in>;
		};
	};
};
Commit	Line	Data
4b79197c NM	1	/*
	2	* Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
98ef7957	8	#include "elpida_ecb240abacn.dtsi"
4b79197c NM	9
4b79197c NM	10	/ {
742ae1f9	11	memory@80000000 {
4b79197c NM	12	device_type = "memory";
	13	reg = <0x80000000 0x40000000>; /* 1 GB */
	14	};
	15
661637ca TV	16	aliases {
	17	display0 = &dvi0;
	18	display1 = &hdmi0;
879a29e3	19	ethernet = &ethernet;
661637ca TV	20	};
661637ca TV	21
3818d7ca	22	leds: leds {
4b79197c	23	compatible = "gpio-leds";
3818d7ca DM	24	pinctrl-names = "default";
	25	pinctrl-0 = <
	26	&led_wkgpio_pins
	27	>;
	28
4b79197c NM	29	heartbeat {
4b79197c NM	30	label = "pandaboard::status1";
6d624eab	31	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
4b79197c NM	32	linux,default-trigger = "heartbeat";
	33	};
	34
	35	mmc {
	36	label = "pandaboard::status2";
6d624eab	37	gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
4b79197c NM	38	linux,default-trigger = "mmc0";
	39	};
	40	};
	41
	42	sound: sound {
	43	compatible = "ti,abe-twl6040";
	44	ti,model = "PandaBoard";
	45
	46	ti,mclk-freq = <38400000>;
	47
	48	ti,mcpdm = <&mcpdm>;
	49
	50	ti,twl6040 = <&twl6040>;
	51
	52	/* Audio routing */
	53	ti,audio-routing =
	54	"Headset Stereophone", "HSOL",
	55	"Headset Stereophone", "HSOR",
	56	"Ext Spk", "HFL",
	57	"Ext Spk", "HFR",
	58	"Line Out", "AUXL",
	59	"Line Out", "AUXR",
	60	"HSMIC", "Headset Mic",
	61	"Headset Mic", "Headset Mic Bias",
	62	"AFML", "Line In",
	63	"AFMR", "Line In";
	64	};
5bd2100e	65
5bd2100e RQ	66	/* HS USB Port 1 Power */
	67	hsusb1_power: hsusb1_power_reg {
	68	compatible = "regulator-fixed";
	69	regulator-name = "hsusb1_vbus";
	70	regulator-min-microvolt = <3300000>;
	71	regulator-max-microvolt = <3300000>;
3a637e00	72	gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
5bd2100e RQ	73	startup-delay-us = <70000>;
5bd2100e RQ	74	enable-active-high;
6f569293 RQ	75	/*
	76	* boot-on is required along with always-on as the
	77	* regulator framework doesn't enable the regulator
	78	* if boot-on is not there.
	79	*/
	80	regulator-always-on;
	81	regulator-boot-on;
5bd2100e RQ	82	};
	83
	84	/* HS USB Host PHY on PORT 1 */
	85	hsusb1_phy: hsusb1_phy {
	86	compatible = "usb-nop-xceiv";
4cbdc86d	87	reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
5bd2100e	88	vcc-supply = <&hsusb1_power>;
2ecf8aa1 RQ	89	clocks = <&auxclk3_ck>;
2ecf8aa1 RQ	90	clock-names = "main_clk";
5bd2100e RQ	91	clock-frequency = <19200000>;
5bd2100e RQ	92	};
851320e3 TL	93
	94	/* regulator for wl12xx on sdio5 */
	95	wl12xx_vmmc: wl12xx_vmmc {
	96	pinctrl-names = "default";
	97	pinctrl-0 = <&wl12xx_gpio>;
	98	compatible = "regulator-fixed";
	99	regulator-name = "vwl1271";
	100	regulator-min-microvolt = <1800000>;
	101	regulator-max-microvolt = <1800000>;
3a637e00	102	gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
851320e3 TL	103	startup-delay-us = <70000>;
	104	enable-active-high;
	105	};
661637ca	106
9e19d0d1	107	tfp410: encoder0 {
661637ca TV	108	compatible = "ti,tfp410";
	109	powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
	110
	111	ports {
	112	#address-cells = <1>;
	113	#size-cells = <0>;
	114
	115	port@0 {
	116	reg = <0>;
	117
9e19d0d1	118	tfp410_in: endpoint {
661637ca TV	119	remote-endpoint = <&dpi_out>;
	120	};
	121	};
	122
	123	port@1 {
	124	reg = <1>;
	125
9e19d0d1	126	tfp410_out: endpoint {
661637ca TV	127	remote-endpoint = <&dvi_connector_in>;
	128	};
	129	};
	130	};
	131	};
	132
9e19d0d1	133	dvi0: connector0 {
661637ca TV	134	compatible = "dvi-connector";
	135	label = "dvi";
	136
	137	digital;
	138
	139	ddc-i2c-bus = <&i2c3>;
	140
	141	port {
	142	dvi_connector_in: endpoint {
	143	remote-endpoint = <&tfp410_out>;
	144	};
	145	};
	146	};
	147
9e19d0d1	148	tpd12s015: encoder1 {
661637ca TV	149	compatible = "ti,tpd12s015";
	150
	151	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
	152	<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
	153	<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
	154
	155	ports {
	156	#address-cells = <1>;
	157	#size-cells = <0>;
	158
	159	port@0 {
	160	reg = <0>;
	161
9e19d0d1	162	tpd12s015_in: endpoint {
661637ca TV	163	remote-endpoint = <&hdmi_out>;
	164	};
	165	};
	166
	167	port@1 {
	168	reg = <1>;
	169
9e19d0d1	170	tpd12s015_out: endpoint {
661637ca TV	171	remote-endpoint = <&hdmi_connector_in>;
	172	};
	173	};
	174	};
	175	};
	176
9e19d0d1	177	hdmi0: connector1 {
661637ca TV	178	compatible = "hdmi-connector";
	179	label = "hdmi";
	180
	181	type = "a";
	182
	183	port {
	184	hdmi_connector_in: endpoint {
	185	remote-endpoint = <&tpd12s015_out>;
	186	};
	187	};
	188	};
4b79197c NM	189	};
	190
	191	&omap4_pmx_core {
	192	pinctrl-names = "default";
	193	pinctrl-0 = <
0352bd1f TV	194	&dss_dpi_pins
0352bd1f TV	195	&tfp410_pins
4b79197c NM	196	&dss_hdmi_pins
4b79197c NM	197	&tpd12s015_pins
5bd2100e	198	&hsusbb1_pins
4b79197c NM	199	>;
	200
	201	twl6040_pins: pinmux_twl6040_pins {
	202	pinctrl-single,pins = <
0e3ae328 JMC	203	OMAP4_IOPAD(0x120, PIN_OUTPUT \| MUX_MODE3) /* hdq_sio.gpio_127 */
0e3ae328 JMC	204	OMAP4_IOPAD(0x1a0, PIN_INPUT \| MUX_MODE0) /* sys_nirq2.sys_nirq2 */
4b79197c NM	205	>;
	206	};
	207
	208	mcpdm_pins: pinmux_mcpdm_pins {
	209	pinctrl-single,pins = <
0e3ae328 JMC	210	OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
	211	OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
	212	OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP \| MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
	213	OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
	214	OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_clks.abe_clks */
4b79197c NM	215	>;
	216	};
	217
	218	mcbsp1_pins: pinmux_mcbsp1_pins {
	219	pinctrl-single,pins = <
0e3ae328 JMC	220	OMAP4_IOPAD(0x0fe, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
	221	OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
	222	OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
	223	OMAP4_IOPAD(0x104, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
4b79197c NM	224	>;
	225	};
	226
0352bd1f TV	227	dss_dpi_pins: pinmux_dss_dpi_pins {
0352bd1f TV	228	pinctrl-single,pins = <
0e3ae328 JMC	229	OMAP4_IOPAD(0x162, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data23 */
	230	OMAP4_IOPAD(0x164, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data22 */
	231	OMAP4_IOPAD(0x166, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data21 */
	232	OMAP4_IOPAD(0x168, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data20 */
	233	OMAP4_IOPAD(0x16a, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data19 */
	234	OMAP4_IOPAD(0x16c, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data18 */
	235	OMAP4_IOPAD(0x16e, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data15 */
	236	OMAP4_IOPAD(0x170, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data14 */
	237	OMAP4_IOPAD(0x172, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data13 */
	238	OMAP4_IOPAD(0x174, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data12 */
	239	OMAP4_IOPAD(0x176, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data11 */
	240
	241	OMAP4_IOPAD(0x1b4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data10 */
	242	OMAP4_IOPAD(0x1b6, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data9 */
	243	OMAP4_IOPAD(0x1b8, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data16 */
	244	OMAP4_IOPAD(0x1ba, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data17 */
	245	OMAP4_IOPAD(0x1bc, PIN_OUTPUT \| MUX_MODE5) /* dispc2_hsync */
	246	OMAP4_IOPAD(0x1be, PIN_OUTPUT \| MUX_MODE5) /* dispc2_pclk */
	247	OMAP4_IOPAD(0x1c0, PIN_OUTPUT \| MUX_MODE5) /* dispc2_vsync */
	248	OMAP4_IOPAD(0x1c2, PIN_OUTPUT \| MUX_MODE5) /* dispc2_de */
	249	OMAP4_IOPAD(0x1c4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data8 */
	250	OMAP4_IOPAD(0x1c6, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data7 */
	251	OMAP4_IOPAD(0x1c8, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data6 */
	252	OMAP4_IOPAD(0x1ca, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data5 */
	253	OMAP4_IOPAD(0x1cc, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data4 */
	254	OMAP4_IOPAD(0x1ce, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data3 */
	255
	256	OMAP4_IOPAD(0x1d0, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data2 */
	257	OMAP4_IOPAD(0x1d2, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data1 */
	258	OMAP4_IOPAD(0x1d4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data0 */
0352bd1f TV	259	>;
	260	};
	261
	262	tfp410_pins: pinmux_tfp410_pins {
	263	pinctrl-single,pins = <
0e3ae328	264	OMAP4_IOPAD(0x184, PIN_OUTPUT \| MUX_MODE3) /* gpio_0 */
0352bd1f TV	265	>;
	266	};
	267
4b79197c NM	268	dss_hdmi_pins: pinmux_dss_hdmi_pins {
4b79197c NM	269	pinctrl-single,pins = <
0e3ae328 JMC	270	OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_cec.hdmi_cec */
	271	OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_scl.hdmi_scl */
	272	OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_sda.hdmi_sda */
4b79197c NM	273	>;
	274	};
	275
	276	tpd12s015_pins: pinmux_tpd12s015_pins {
	277	pinctrl-single,pins = <
0e3ae328 JMC	278	OMAP4_IOPAD(0x062, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a17.gpio_41 */
	279	OMAP4_IOPAD(0x088, PIN_OUTPUT \| MUX_MODE3) /* gpmc_nbe1.gpio_60 */
	280	OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* hdmi_hpd.gpio_63 */
4b79197c NM	281	>;
	282	};
	283
5bd2100e RQ	284	hsusbb1_pins: pinmux_hsusbb1_pins {
5bd2100e RQ	285	pinctrl-single,pins = <
0e3ae328 JMC	286	OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
	287	OMAP4_IOPAD(0x0c4, PIN_OUTPUT \| MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
	288	OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
	289	OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
	290	OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
	291	OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
	292	OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
	293	OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
	294	OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
	295	OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
	296	OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
	297	OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
5bd2100e RQ	298	>;
	299	};
	300
4b79197c NM	301	i2c1_pins: pinmux_i2c1_pins {
4b79197c NM	302	pinctrl-single,pins = <
0e3ae328 JMC	303	OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
0e3ae328 JMC	304	OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
4b79197c NM	305	>;
	306	};
	307
	308	i2c2_pins: pinmux_i2c2_pins {
	309	pinctrl-single,pins = <
0e3ae328 JMC	310	OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
0e3ae328 JMC	311	OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
4b79197c NM	312	>;
	313	};
	314
	315	i2c3_pins: pinmux_i2c3_pins {
	316	pinctrl-single,pins = <
0e3ae328 JMC	317	OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
0e3ae328 JMC	318	OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
4b79197c NM	319	>;
	320	};
	321
	322	i2c4_pins: pinmux_i2c4_pins {
	323	pinctrl-single,pins = <
0e3ae328 JMC	324	OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_scl */
0e3ae328 JMC	325	OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_sda */
4b79197c NM	326	>;
4b79197c NM	327	};
851320e3 TL	328
	329	/*
	330	* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
	331	* REVISIT: Are the pull-ups needed for GPIO 48 and 49?
	332	*/
	333	wl12xx_gpio: pinmux_wl12xx_gpio {
	334	pinctrl-single,pins = <
0e3ae328 JMC	335	OMAP4_IOPAD(0x066, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a19.gpio_43 */
	336	OMAP4_IOPAD(0x06c, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a22.gpio_46 */
	337	OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP \| MUX_MODE3) /* gpmc_a24.gpio_48 */
	338	OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP \| MUX_MODE3) /* gpmc_a25.gpio_49 */
851320e3 TL	339	>;
	340	};
	341
	342	/* wl12xx GPIO inputs and SDIO pins */
	343	wl12xx_pins: pinmux_wl12xx_pins {
	344	pinctrl-single,pins = <
0e3ae328 JMC	345	OMAP4_IOPAD(0x078, PIN_INPUT \| MUX_MODE3) /* gpmc_ncs2.gpio_52 */
	346	OMAP4_IOPAD(0x07a, PIN_INPUT \| MUX_MODE3) /* gpmc_ncs3.gpio_53 */
	347	OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
	348	OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
	349	OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
	350	OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
	351	OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
	352	OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
851320e3 TL	353	>;
851320e3 TL	354	};
3818d7ca DM	355	};
3818d7ca DM	356
2ba2866f B	357	&omap4_pmx_wkup {
	358	led_wkgpio_pins: pinmux_leds_wkpins {
	359	pinctrl-single,pins = <
0e3ae328 JMC	360	OMAP4_IOPAD(0x05a, PIN_OUTPUT \| MUX_MODE3) /* gpio_wk7 */
0e3ae328 JMC	361	OMAP4_IOPAD(0x05c, PIN_OUTPUT \| MUX_MODE3) /* gpio_wk8 */
2ba2866f B	362	>;
	363	};
	364	};
	365
4b79197c NM	366	&i2c1 {
	367	pinctrl-names = "default";
	368	pinctrl-0 = <&i2c1_pins>;
	369
	370	clock-frequency = <400000>;
	371
	372	twl: twl@48 {
	373	reg = <0x48>;
8fea7d5a FV	374	/* IRQ# = 7 */
8fea7d5a FV	375	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
4b79197c NM	376	};
	377
	378	twl6040: twl@4b {
	379	compatible = "ti,twl6040";
2ab60a38	380	#clock-cells = <0>;
4b79197c	381	reg = <0x4b>;
aa986458 PU	382
	383	pinctrl-names = "default";
	384	pinctrl-0 = <&twl6040_pins>;
	385
8fea7d5a FV	386	/* IRQ# = 119 */
8fea7d5a FV	387	interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
78eb938e	388	ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
4b79197c NM	389
	390	vio-supply = <&v1v8>;
	391	v2v1-supply = <&v2v1>;
	392	enable-active-high;
	393	};
	394	};
	395
98ef7957	396	#include "twl6030.dtsi"
06a9ea5d	397	#include "twl6030_omap4.dtsi"
4b79197c NM	398
	399	&i2c2 {
	400	pinctrl-names = "default";
	401	pinctrl-0 = <&i2c2_pins>;
	402
	403	clock-frequency = <400000>;
	404	};
	405
	406	&i2c3 {
	407	pinctrl-names = "default";
	408	pinctrl-0 = <&i2c3_pins>;
	409
	410	clock-frequency = <100000>;
	411
	412	/*
	413	* Display monitor features are burnt in their EEPROM as EDID data.
	414	* The EEPROM is connected as I2C slave device.
	415	*/
	416	eeprom@50 {
	417	compatible = "ti,eeprom";
	418	reg = <0x50>;
	419	};
	420	};
	421
	422	&i2c4 {
	423	pinctrl-names = "default";
	424	pinctrl-0 = <&i2c4_pins>;
	425
	426	clock-frequency = <400000>;
	427	};
	428
	429	&mmc1 {
	430	vmmc-supply = <&vmmc>;
	431	bus-width = <8>;
	432	};
	433
	434	&mmc2 {
	435	status = "disabled";
	436	};
	437
	438	&mmc3 {
	439	status = "disabled";
	440	};
	441
	442	&mmc4 {
	443	status = "disabled";
	444	};
	445
	446	&mmc5 {
851320e3 TL	447	pinctrl-names = "default";
	448	pinctrl-0 = <&wl12xx_pins>;
	449	vmmc-supply = <&wl12xx_vmmc>;
84ae4974 TL	450	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
84ae4974 TL	451	&omap4_pmx_core 0x10e>;
851320e3	452	non-removable;
4b79197c	453	bus-width = <4>;
851320e3	454	cap-power-off-card;
99f84cae EP	455
	456	#address-cells = <1>;
	457	#size-cells = <0>;
	458	wlcore: wlcore@2 {
	459	compatible = "ti,wl1271";
	460	reg = <2>;
	461	interrupt-parent = <&gpio2>;
	462	interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
	463	ref-clock-frequency = <38400000>;
	464	};
4b79197c NM	465	};
	466
	467	&emif1 {
	468	cs1-used;
	469	device-handle = <&elpida_ECB240ABACN>;
	470	};
	471
	472	&emif2 {
	473	cs1-used;
	474	device-handle = <&elpida_ECB240ABACN>;
	475	};
	476
aa986458 PU	477	&mcbsp1 {
	478	pinctrl-names = "default";
	479	pinctrl-0 = <&mcbsp1_pins>;
	480	status = "okay";
	481	};
	482
aa986458 PU	483	&mcpdm {
	484	pinctrl-names = "default";
	485	pinctrl-0 = <&mcpdm_pins>;
2ab60a38 PU	486
	487	clocks = <&twl6040>;
	488	clock-names = "pdmclk";
	489
aa986458 PU	490	status = "okay";
	491	};
	492
4b79197c NM	493	&twl_usb_comparator {
	494	usb-supply = <&vusb>;
	495	};
	496
31f0820a	497	&uart2 {
7136d457	498	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	499	&omap4_pmx_core OMAP4_UART2_RX>;
	500	};
	501
	502	&uart3 {
7136d457	503	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	504	&omap4_pmx_core OMAP4_UART3_RX>;
	505	};
	506
	507	&uart4 {
7136d457	508	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	509	&omap4_pmx_core OMAP4_UART4_RX>;
	510	};
	511
4b79197c NM	512	&usb_otg_hs {
	513	interface-type = <1>;
	514	mode = <3>;
	515	power = <50>;
	516	};
5bd2100e RQ	517
	518	&usbhshost {
	519	port1-mode = "ehci-phy";
	520	};
	521
	522	&usbhsehci {
	523	phys = <&hsusb1_phy>;
879a29e3 TL	524
	525	#address-cells = <1>;
	526	#size-cells = <0>;
	527
	528	hub@1 {
	529	compatible = "usb424,9514";
	530	reg = <1>;
	531	#address-cells = <1>;
	532	#size-cells = <0>;
	533
	534	ethernet: usbether@1 {
	535	compatible = "usb424,ec00";
	536	reg = <1>;
	537	};
	538	};
5bd2100e	539	};
661637ca TV	540
	541	&dss {
	542	status = "ok";
	543
	544	port {
	545	dpi_out: endpoint {
	546	remote-endpoint = <&tfp410_in>;
	547	data-lines = <24>;
	548	};
	549	};
	550	};
	551
	552	&dsi2 {
	553	status = "ok";
	554	vdd-supply = <&vcxio>;
	555	};
	556
	557	&hdmi {
	558	status = "ok";
	559	vdda-supply = <&vdac>;
	560
	561	port {
	562	hdmi_out: endpoint {
	563	remote-endpoint = <&tpd12s015_in>;
	564	};
	565	};
	566	};