Commit | Line | Data |
---|---|---|
a4d4b153 PM |
1 | /* |
2 | * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> | |
3 | * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License version 2 (or later) as | |
7 | * published by the Free Software Foundation. | |
8 | */ | |
9 | ||
10 | /dts-v1/; | |
11 | ||
f2e2c9d9 | 12 | #include "omap34xx-hs.dtsi" |
a4d4b153 PM |
13 | |
14 | / { | |
15 | model = "Nokia N900"; | |
16 | compatible = "nokia,omap3-n900", "ti,omap3"; | |
17 | ||
18 | cpus { | |
19 | cpu@0 { | |
20 | cpu0-supply = <&vcc>; | |
21 | }; | |
22 | }; | |
23 | ||
24 | memory { | |
25 | device_type = "memory"; | |
26 | reg = <0x80000000 0x10000000>; /* 256 MB */ | |
27 | }; | |
28 | ||
3931c839 SR |
29 | gpio_keys { |
30 | compatible = "gpio-keys"; | |
31 | ||
32 | camera_lens_cover { | |
33 | label = "Camera Lens Cover"; | |
34 | gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ | |
35 | linux,input-type = <5>; /* EV_SW */ | |
36 | linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ | |
37 | gpio-key,wakeup; | |
38 | }; | |
39 | ||
40 | camera_focus { | |
41 | label = "Camera Focus"; | |
42 | gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ | |
43 | linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ | |
44 | gpio-key,wakeup; | |
45 | }; | |
46 | ||
47 | camera_capture { | |
48 | label = "Camera Capture"; | |
49 | gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ | |
50 | linux,code = <0xd4>; /* KEY_CAMERA */ | |
51 | gpio-key,wakeup; | |
52 | }; | |
53 | ||
54 | lock_button { | |
55 | label = "Lock Button"; | |
56 | gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ | |
57 | linux,code = <0x98>; /* KEY_SCREENLOCK */ | |
58 | gpio-key,wakeup; | |
59 | }; | |
60 | ||
61 | keypad_slide { | |
62 | label = "Keypad Slide"; | |
63 | gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ | |
64 | linux,input-type = <5>; /* EV_SW */ | |
65 | linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ | |
66 | gpio-key,wakeup; | |
67 | }; | |
68 | ||
69 | proximity_sensor { | |
70 | label = "Proximity Sensor"; | |
71 | gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ | |
72 | linux,input-type = <5>; /* EV_SW */ | |
73 | linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ | |
74 | }; | |
75 | }; | |
76 | ||
e17337a2 SR |
77 | isp1704: isp1704 { |
78 | compatible = "nxp,isp1704"; | |
79 | nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; | |
80 | usb-phy = <&usb2_phy>; | |
81 | }; | |
a4d4b153 PM |
82 | }; |
83 | ||
ac888a88 SR |
84 | &omap3_pmx_core { |
85 | pinctrl-names = "default"; | |
86 | ||
7a89eecf SR |
87 | uart2_pins: pinmux_uart2_pins { |
88 | pinctrl-single,pins = < | |
89 | 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */ | |
90 | 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ | |
91 | >; | |
92 | }; | |
93 | ||
94 | uart3_pins: pinmux_uart3_pins { | |
95 | pinctrl-single,pins = < | |
96 | 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */ | |
97 | 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ | |
98 | >; | |
99 | }; | |
100 | ||
ac888a88 SR |
101 | i2c1_pins: pinmux_i2c1_pins { |
102 | pinctrl-single,pins = < | |
103 | 0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ | |
104 | 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ | |
105 | >; | |
106 | }; | |
107 | ||
108 | i2c2_pins: pinmux_i2c2_pins { | |
109 | pinctrl-single,pins = < | |
110 | 0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ | |
111 | 0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ | |
112 | >; | |
113 | }; | |
114 | ||
115 | i2c3_pins: pinmux_i2c3_pins { | |
116 | pinctrl-single,pins = < | |
117 | 0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ | |
118 | 0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ | |
119 | >; | |
120 | }; | |
f1751cff SR |
121 | |
122 | mmc1_pins: pinmux_mmc1_pins { | |
123 | pinctrl-single,pins = < | |
124 | 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ | |
125 | 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ | |
126 | 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ | |
127 | 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ | |
128 | 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ | |
129 | 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ | |
130 | >; | |
131 | }; | |
d1e6f516 | 132 | |
edd5eb4e TL |
133 | mmc2_pins: pinmux_mmc2_pins { |
134 | pinctrl-single,pins = < | |
135 | 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ | |
136 | 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ | |
137 | 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ | |
138 | 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ | |
139 | 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ | |
140 | 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ | |
141 | 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ | |
142 | 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ | |
143 | 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ | |
144 | 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ | |
145 | >; | |
146 | }; | |
147 | ||
d1e6f516 SR |
148 | display_pins: pinmux_display_pins { |
149 | pinctrl-single,pins = < | |
150 | 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ | |
151 | >; | |
152 | }; | |
ac888a88 SR |
153 | }; |
154 | ||
a4d4b153 | 155 | &i2c1 { |
ac888a88 SR |
156 | pinctrl-names = "default"; |
157 | pinctrl-0 = <&i2c1_pins>; | |
158 | ||
a4d4b153 PM |
159 | clock-frequency = <2200000>; |
160 | ||
161 | twl: twl@48 { | |
162 | reg = <0x48>; | |
163 | interrupts = <7>; /* SYS_NIRQ cascaded to intc */ | |
164 | interrupt-parent = <&intc>; | |
165 | }; | |
166 | }; | |
167 | ||
168 | #include "twl4030.dtsi" | |
ac888a88 | 169 | #include "twl4030_omap3.dtsi" |
a4d4b153 | 170 | |
9cdbbadd SR |
171 | &vaux1 { |
172 | regulator-name = "V28"; | |
173 | regulator-min-microvolt = <2800000>; | |
174 | regulator-max-microvolt = <2800000>; | |
175 | regulator-always-on; /* due battery cover sensor */ | |
176 | }; | |
177 | ||
178 | &vaux2 { | |
179 | regulator-name = "VCSI"; | |
180 | regulator-min-microvolt = <1800000>; | |
181 | regulator-max-microvolt = <1800000>; | |
182 | }; | |
183 | ||
184 | &vaux3 { | |
185 | regulator-name = "VMMC2_30"; | |
186 | regulator-min-microvolt = <2800000>; | |
187 | regulator-max-microvolt = <3000000>; | |
188 | }; | |
189 | ||
190 | &vaux4 { | |
191 | regulator-name = "VCAM_ANA_28"; | |
192 | regulator-min-microvolt = <2800000>; | |
193 | regulator-max-microvolt = <2800000>; | |
194 | }; | |
195 | ||
196 | &vmmc1 { | |
197 | regulator-name = "VMMC1"; | |
198 | regulator-min-microvolt = <1850000>; | |
199 | regulator-max-microvolt = <3150000>; | |
200 | }; | |
201 | ||
202 | &vmmc2 { | |
203 | regulator-name = "V28_A"; | |
204 | regulator-min-microvolt = <2800000>; | |
205 | regulator-max-microvolt = <3000000>; | |
206 | regulator-always-on; /* due VIO leak to AIC34 VDDs */ | |
207 | }; | |
208 | ||
209 | &vpll1 { | |
210 | regulator-name = "VPLL"; | |
211 | regulator-min-microvolt = <1800000>; | |
212 | regulator-max-microvolt = <1800000>; | |
213 | regulator-always-on; | |
214 | }; | |
215 | ||
216 | &vpll2 { | |
217 | regulator-name = "VSDI_CSI"; | |
218 | regulator-min-microvolt = <1800000>; | |
219 | regulator-max-microvolt = <1800000>; | |
220 | regulator-always-on; | |
221 | }; | |
222 | ||
223 | &vsim { | |
224 | regulator-name = "VMMC2_IO_18"; | |
225 | regulator-min-microvolt = <1800000>; | |
226 | regulator-max-microvolt = <1800000>; | |
227 | }; | |
228 | ||
229 | &vio { | |
230 | regulator-name = "VIO"; | |
231 | regulator-min-microvolt = <1800000>; | |
232 | regulator-max-microvolt = <1800000>; | |
233 | ||
234 | }; | |
235 | ||
236 | &vintana1 { | |
237 | regulator-name = "VINTANA1"; | |
238 | /* fixed to 1500000 */ | |
239 | regulator-always-on; | |
240 | }; | |
241 | ||
242 | &vintana2 { | |
243 | regulator-name = "VINTANA2"; | |
244 | regulator-min-microvolt = <2750000>; | |
245 | regulator-max-microvolt = <2750000>; | |
246 | regulator-always-on; | |
247 | }; | |
248 | ||
249 | &vintdig { | |
250 | regulator-name = "VINTDIG"; | |
251 | /* fixed to 1500000 */ | |
252 | regulator-always-on; | |
253 | }; | |
254 | ||
06ba7a61 SR |
255 | &twl { |
256 | twl_audio: audio { | |
257 | compatible = "ti,twl4030-audio"; | |
258 | ti,enable-vibra = <1>; | |
259 | }; | |
260 | }; | |
261 | ||
85c215f3 SR |
262 | &twl_keypad { |
263 | linux,keymap = < 0x00000010 /* KEY_Q */ | |
264 | 0x00010018 /* KEY_O */ | |
265 | 0x00020019 /* KEY_P */ | |
266 | 0x00030033 /* KEY_COMMA */ | |
267 | 0x0004000e /* KEY_BACKSPACE */ | |
268 | 0x0006001e /* KEY_A */ | |
269 | 0x0007001f /* KEY_S */ | |
270 | ||
271 | 0x01000011 /* KEY_W */ | |
272 | 0x01010020 /* KEY_D */ | |
273 | 0x01020021 /* KEY_F */ | |
274 | 0x01030022 /* KEY_G */ | |
275 | 0x01040023 /* KEY_H */ | |
276 | 0x01050024 /* KEY_J */ | |
277 | 0x01060025 /* KEY_K */ | |
278 | 0x01070026 /* KEY_L */ | |
279 | ||
280 | 0x02000012 /* KEY_E */ | |
281 | 0x02010034 /* KEY_DOT */ | |
282 | 0x02020067 /* KEY_UP */ | |
283 | 0x0203001c /* KEY_ENTER */ | |
284 | 0x0205002c /* KEY_Z */ | |
285 | 0x0206002d /* KEY_X */ | |
286 | 0x0207002e /* KEY_C */ | |
287 | 0x02080043 /* KEY_F9 */ | |
288 | ||
289 | 0x03000013 /* KEY_R */ | |
290 | 0x0301002f /* KEY_V */ | |
291 | 0x03020030 /* KEY_B */ | |
292 | 0x03030031 /* KEY_N */ | |
293 | 0x03040032 /* KEY_M */ | |
294 | 0x03050039 /* KEY_SPACE */ | |
295 | 0x03060039 /* KEY_SPACE */ | |
296 | 0x03070069 /* KEY_LEFT */ | |
297 | ||
298 | 0x04000014 /* KEY_T */ | |
299 | 0x0401006c /* KEY_DOWN */ | |
300 | 0x0402006a /* KEY_RIGHT */ | |
301 | 0x0404001d /* KEY_LEFTCTRL */ | |
302 | 0x04050064 /* KEY_RIGHTALT */ | |
303 | 0x0406002a /* KEY_LEFTSHIFT */ | |
304 | 0x04080044 /* KEY_F10 */ | |
305 | ||
306 | 0x05000015 /* KEY_Y */ | |
307 | 0x05080057 /* KEY_F11 */ | |
308 | ||
309 | 0x06000016 /* KEY_U */ | |
310 | ||
311 | 0x07000017 /* KEY_I */ | |
312 | 0x07010041 /* KEY_F7 */ | |
313 | 0x07020042 /* KEY_F8 */ | |
314 | >; | |
315 | }; | |
316 | ||
a4d4b153 PM |
317 | &twl_gpio { |
318 | ti,pullups = <0x0>; | |
319 | ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ | |
320 | }; | |
321 | ||
322 | &i2c2 { | |
ac888a88 SR |
323 | pinctrl-names = "default"; |
324 | pinctrl-0 = <&i2c2_pins>; | |
325 | ||
48fc9864 | 326 | clock-frequency = <100000>; |
b2b9b258 | 327 | |
14e3e295 SR |
328 | tlv320aic3x: tlv320aic3x@18 { |
329 | compatible = "ti,tlv320aic3x"; | |
330 | reg = <0x18>; | |
331 | gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ | |
332 | ai3x-gpio-func = < | |
333 | 0 /* AIC3X_GPIO1_FUNC_DISABLED */ | |
334 | 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ | |
335 | >; | |
336 | ||
337 | AVDD-supply = <&vmmc2>; | |
338 | DRVDD-supply = <&vmmc2>; | |
339 | IOVDD-supply = <&vio>; | |
340 | DVDD-supply = <&vio>; | |
341 | }; | |
342 | ||
343 | tlv320aic3x_aux: tlv320aic3x@19 { | |
344 | compatible = "ti,tlv320aic3x"; | |
345 | reg = <0x19>; | |
346 | gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ | |
347 | ||
348 | AVDD-supply = <&vmmc2>; | |
349 | DRVDD-supply = <&vmmc2>; | |
350 | IOVDD-supply = <&vio>; | |
351 | DVDD-supply = <&vio>; | |
352 | }; | |
353 | ||
12f2f873 SR |
354 | tsl2563: tsl2563@29 { |
355 | compatible = "amstaos,tsl2563"; | |
356 | reg = <0x29>; | |
357 | ||
358 | amstaos,cover-comp-gain = <16>; | |
359 | }; | |
360 | ||
a0bf1f3e SR |
361 | lp5523: lp5523@32 { |
362 | compatible = "national,lp5523"; | |
363 | reg = <0x32>; | |
364 | clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ | |
365 | enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ | |
366 | ||
367 | chan0 { | |
368 | chan-name = "lp5523:kb1"; | |
369 | led-cur = /bits/ 8 <50>; | |
370 | max-cur = /bits/ 8 <100>; | |
371 | }; | |
372 | ||
373 | chan1 { | |
374 | chan-name = "lp5523:kb2"; | |
375 | led-cur = /bits/ 8 <50>; | |
376 | max-cur = /bits/ 8 <100>; | |
377 | }; | |
378 | ||
379 | chan2 { | |
380 | chan-name = "lp5523:kb3"; | |
381 | led-cur = /bits/ 8 <50>; | |
382 | max-cur = /bits/ 8 <100>; | |
383 | }; | |
384 | ||
385 | chan3 { | |
386 | chan-name = "lp5523:kb4"; | |
387 | led-cur = /bits/ 8 <50>; | |
388 | max-cur = /bits/ 8 <100>; | |
389 | }; | |
390 | ||
391 | chan4 { | |
392 | chan-name = "lp5523:b"; | |
393 | led-cur = /bits/ 8 <50>; | |
394 | max-cur = /bits/ 8 <100>; | |
395 | }; | |
396 | ||
397 | chan5 { | |
398 | chan-name = "lp5523:g"; | |
399 | led-cur = /bits/ 8 <50>; | |
400 | max-cur = /bits/ 8 <100>; | |
401 | }; | |
402 | ||
403 | chan6 { | |
404 | chan-name = "lp5523:r"; | |
405 | led-cur = /bits/ 8 <50>; | |
406 | max-cur = /bits/ 8 <100>; | |
407 | }; | |
408 | ||
409 | chan7 { | |
410 | chan-name = "lp5523:kb5"; | |
411 | led-cur = /bits/ 8 <50>; | |
412 | max-cur = /bits/ 8 <100>; | |
413 | }; | |
414 | ||
415 | chan8 { | |
416 | chan-name = "lp5523:kb6"; | |
417 | led-cur = /bits/ 8 <50>; | |
418 | max-cur = /bits/ 8 <100>; | |
419 | }; | |
420 | }; | |
421 | ||
b2b9b258 SR |
422 | bq27200: bq27200@55 { |
423 | compatible = "ti,bq27200"; | |
424 | reg = <0x55>; | |
425 | }; | |
9e2367c8 SR |
426 | |
427 | tpa6130a2: tpa6130a2@60 { | |
428 | compatible = "ti,tpa6130a2"; | |
429 | reg = <0x60>; | |
430 | ||
431 | Vdd-supply = <&vmmc2>; | |
432 | ||
433 | power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ | |
434 | }; | |
334a09c8 SR |
435 | |
436 | bq24150a: bq24150a@6b { | |
437 | compatible = "ti,bq24150a"; | |
438 | reg = <0x6b>; | |
439 | ||
440 | ti,current-limit = <100>; | |
441 | ti,weak-battery-voltage = <3400>; | |
442 | ti,battery-regulation-voltage = <4200>; | |
443 | ti,charge-current = <650>; | |
444 | ti,termination-current = <100>; | |
445 | ti,resistor-sense = <68>; | |
446 | ||
447 | ti,usb-charger-detection = <&isp1704>; | |
448 | }; | |
a4d4b153 PM |
449 | }; |
450 | ||
451 | &i2c3 { | |
ac888a88 SR |
452 | pinctrl-names = "default"; |
453 | pinctrl-0 = <&i2c3_pins>; | |
454 | ||
48fc9864 | 455 | clock-frequency = <400000>; |
a4d4b153 PM |
456 | }; |
457 | ||
458 | &mmc1 { | |
f1751cff SR |
459 | pinctrl-names = "default"; |
460 | pinctrl-0 = <&mmc1_pins>; | |
461 | vmmc-supply = <&vmmc1>; | |
462 | bus-width = <4>; | |
463 | cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ | |
a4d4b153 PM |
464 | }; |
465 | ||
edd5eb4e | 466 | /* most boards use vaux3, only some old versions use vmmc2 instead */ |
a4d4b153 | 467 | &mmc2 { |
edd5eb4e TL |
468 | pinctrl-names = "default"; |
469 | pinctrl-0 = <&mmc2_pins>; | |
470 | vmmc-supply = <&vaux3>; | |
471 | vmmc_aux-supply = <&vsim>; | |
472 | bus-width = <8>; | |
473 | non-removable; | |
a4d4b153 PM |
474 | }; |
475 | ||
476 | &mmc3 { | |
477 | status = "disabled"; | |
478 | }; | |
479 | ||
8699d2dd SR |
480 | &gpmc { |
481 | ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ | |
482 | ||
483 | /* gpio-irq for dma: 65 */ | |
484 | ||
485 | onenand@0,0 { | |
486 | #address-cells = <1>; | |
487 | #size-cells = <1>; | |
488 | reg = <0 0 0x10000000>; | |
489 | ||
490 | gpmc,sync-read; | |
491 | gpmc,sync-write; | |
492 | gpmc,burst-length = <16>; | |
493 | gpmc,burst-read; | |
494 | gpmc,burst-wrap; | |
495 | gpmc,burst-write; | |
496 | gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ | |
497 | gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ | |
498 | gpmc,cs-on-ns = <0>; | |
499 | gpmc,cs-rd-off-ns = <87>; | |
500 | gpmc,cs-wr-off-ns = <87>; | |
501 | gpmc,adv-on-ns = <0>; | |
502 | gpmc,adv-rd-off-ns = <10>; | |
503 | gpmc,adv-wr-off-ns = <10>; | |
504 | gpmc,oe-on-ns = <15>; | |
505 | gpmc,oe-off-ns = <87>; | |
506 | gpmc,we-on-ns = <0>; | |
507 | gpmc,we-off-ns = <87>; | |
508 | gpmc,rd-cycle-ns = <112>; | |
509 | gpmc,wr-cycle-ns = <112>; | |
510 | gpmc,access-ns = <81>; | |
511 | gpmc,page-burst-access-ns = <15>; | |
512 | gpmc,bus-turnaround-ns = <0>; | |
513 | gpmc,cycle2cycle-delay-ns = <0>; | |
514 | gpmc,wait-monitoring-ns = <0>; | |
515 | gpmc,clk-activation-ns = <5>; | |
516 | gpmc,wr-data-mux-bus-ns = <30>; | |
517 | gpmc,wr-access-ns = <81>; | |
518 | gpmc,sync-clk-ps = <15000>; | |
519 | ||
520 | /* | |
521 | * MTD partition table corresponding to Nokia's | |
522 | * Maemo 5 (Fremantle) release. | |
523 | */ | |
524 | partition@0 { | |
525 | label = "bootloader"; | |
526 | reg = <0x00000000 0x00020000>; | |
527 | read-only; | |
528 | }; | |
529 | partition@1 { | |
530 | label = "config"; | |
531 | reg = <0x00020000 0x00060000>; | |
532 | }; | |
533 | partition@2 { | |
534 | label = "log"; | |
535 | reg = <0x00080000 0x00040000>; | |
536 | }; | |
537 | partition@3 { | |
538 | label = "kernel"; | |
539 | reg = <0x000c0000 0x00200000>; | |
540 | }; | |
541 | partition@4 { | |
542 | label = "initfs"; | |
543 | reg = <0x002c0000 0x00200000>; | |
544 | }; | |
545 | partition@5 { | |
546 | label = "rootfs"; | |
547 | reg = <0x004c0000 0x0fb40000>; | |
548 | }; | |
549 | }; | |
550 | }; | |
551 | ||
a4d4b153 PM |
552 | &mcspi1 { |
553 | /* | |
554 | * For some reason, touchscreen is necessary for screen to work at | |
555 | * all on real hw. It works well without it on emulator. | |
556 | * | |
557 | * Also... order in the device tree actually matters here. | |
558 | */ | |
559 | tsc2005@0 { | |
560 | compatible = "tsc2005"; | |
561 | spi-max-frequency = <6000000>; | |
562 | reg = <0>; | |
563 | }; | |
564 | mipid@2 { | |
565 | compatible = "acx565akm"; | |
566 | spi-max-frequency = <6000000>; | |
567 | reg = <2>; | |
d1e6f516 SR |
568 | |
569 | pinctrl-names = "default"; | |
570 | pinctrl-0 = <&display_pins>; | |
a4d4b153 PM |
571 | }; |
572 | }; | |
573 | ||
574 | &usb_otg_hs { | |
575 | interface-type = <0>; | |
576 | usb-phy = <&usb2_phy>; | |
d2afcf09 RQ |
577 | phys = <&usb2_phy>; |
578 | phy-names = "usb2-phy"; | |
a4d4b153 PM |
579 | mode = <2>; |
580 | power = <50>; | |
581 | }; | |
7a89eecf SR |
582 | |
583 | &uart1 { | |
584 | status = "disabled"; | |
585 | }; | |
586 | ||
587 | &uart2 { | |
588 | pinctrl-names = "default"; | |
589 | pinctrl-0 = <&uart2_pins>; | |
590 | }; | |
591 | ||
592 | &uart3 { | |
593 | pinctrl-names = "default"; | |
594 | pinctrl-0 = <&uart3_pins>; | |
595 | }; |