[linux-2.6-block.git] / arch / arm / boot / dts / omap3-n900.dts

/*
 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
 * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 (or later) as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "omap34xx-hs.dtsi"

/ {
	model = "Nokia N900";
	compatible = "nokia,omap3-n900", "ti,omap3";

	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	gpio_keys {
		compatible = "gpio-keys";

		camera_lens_cover {
			label = "Camera Lens Cover";
			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
			gpio-key,wakeup;
		};

		camera_focus {
			label = "Camera Focus";
			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
			gpio-key,wakeup;
		};

		camera_capture {
			label = "Camera Capture";
			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
			linux,code = <0xd4>; /* KEY_CAMERA */
			gpio-key,wakeup;
		};

		lock_button {
			label = "Lock Button";
			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
			linux,code = <0x98>; /* KEY_SCREENLOCK */
			gpio-key,wakeup;
		};

		keypad_slide {
			label = "Keypad Slide";
			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
			gpio-key,wakeup;
		};

		proximity_sensor {
			label = "Proximity Sensor";
			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
		};
	};

};

&omap3_pmx_core {
	pinctrl-names = "default";

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
		>;
	};

	mmc2_pins: pinmux_mmc2_pins {
		pinctrl-single,pins = <
			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
		>;
	};

	display_pins: pinmux_display_pins {
		pinctrl-single,pins = <
			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2200000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"

&vaux1 {
	regulator-name = "V28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-always-on; /* due battery cover sensor */
};

&vaux2 {
	regulator-name = "VCSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vaux3 {
	regulator-name = "VMMC2_30";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
};

&vaux4 {
	regulator-name = "VCAM_ANA_28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
};

&vmmc1 {
	regulator-name = "VMMC1";
	regulator-min-microvolt = <1850000>;
	regulator-max-microvolt = <3150000>;
};

&vmmc2 {
	regulator-name = "V28_A";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	regulator-always-on; /* due VIO leak to AIC34 VDDs */
};

&vpll1 {
	regulator-name = "VPLL";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vpll2 {
	regulator-name = "VSDI_CSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vsim {
	regulator-name = "VMMC2_IO_18";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vio {
	regulator-name = "VIO";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;

};

&vintana1 {
	regulator-name = "VINTANA1";
	/* fixed to 1500000 */
	regulator-always-on;
};

&vintana2 {
	regulator-name = "VINTANA2";
	regulator-min-microvolt = <2750000>;
	regulator-max-microvolt = <2750000>;
	regulator-always-on;
};

&vintdig {
	regulator-name = "VINTDIG";
	/* fixed to 1500000 */
	regulator-always-on;
};

&twl {
	twl_audio: audio {
		compatible = "ti,twl4030-audio";
		ti,enable-vibra = <1>;
	};
};

&twl_keypad {
	linux,keymap = < 0x00000010 /* KEY_Q */
			 0x00010018 /* KEY_O */
			 0x00020019 /* KEY_P */
			 0x00030033 /* KEY_COMMA */
			 0x0004000e /* KEY_BACKSPACE */
			 0x0006001e /* KEY_A */
			 0x0007001f /* KEY_S */

			 0x01000011 /* KEY_W */
			 0x01010020 /* KEY_D */
			 0x01020021 /* KEY_F */
			 0x01030022 /* KEY_G */
			 0x01040023 /* KEY_H */
			 0x01050024 /* KEY_J */
			 0x01060025 /* KEY_K */
			 0x01070026 /* KEY_L */

			 0x02000012 /* KEY_E */
			 0x02010034 /* KEY_DOT */
			 0x02020067 /* KEY_UP */
			 0x0203001c /* KEY_ENTER */
			 0x0205002c /* KEY_Z */
			 0x0206002d /* KEY_X */
			 0x0207002e /* KEY_C */
			 0x02080043 /* KEY_F9 */

			 0x03000013 /* KEY_R */
			 0x0301002f /* KEY_V */
			 0x03020030 /* KEY_B */
			 0x03030031 /* KEY_N */
			 0x03040032 /* KEY_M */
			 0x03050039 /* KEY_SPACE */
			 0x03060039 /* KEY_SPACE */
			 0x03070069 /* KEY_LEFT */

			 0x04000014 /* KEY_T */
			 0x0401006c /* KEY_DOWN */
			 0x0402006a /* KEY_RIGHT */
			 0x0404001d /* KEY_LEFTCTRL */
			 0x04050064 /* KEY_RIGHTALT */
			 0x0406002a /* KEY_LEFTSHIFT */
			 0x04080044 /* KEY_F10 */

			 0x05000015 /* KEY_Y */
			 0x05080057 /* KEY_F11 */

			 0x06000016 /* KEY_U */

			 0x07000017 /* KEY_I */
			 0x07010041 /* KEY_F7 */
			 0x07020042 /* KEY_F8 */
			 >;
};

&twl_gpio {
	ti,pullups	= <0x0>;
	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <100000>;

	tlv320aic3x: tlv320aic3x@18 {
		compatible = "ti,tlv320aic3x";
		reg = <0x18>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
		ai3x-gpio-func = <
			0 /* AIC3X_GPIO1_FUNC_DISABLED */
			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
		>;

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	tlv320aic3x_aux: tlv320aic3x@19 {
		compatible = "ti,tlv320aic3x";
		reg = <0x19>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	tsl2563: tsl2563@29 {
		compatible = "amstaos,tsl2563";
		reg = <0x29>;

		amstaos,cover-comp-gain = <16>;
	};

	lp5523: lp5523@32 {
		compatible = "national,lp5523";
		reg = <0x32>;
		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

		chan0 {
			chan-name = "lp5523:kb1";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan1 {
			chan-name = "lp5523:kb2";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan2 {
			chan-name = "lp5523:kb3";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan3 {
			chan-name = "lp5523:kb4";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan4 {
			chan-name = "lp5523:b";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan5 {
			chan-name = "lp5523:g";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan6 {
			chan-name = "lp5523:r";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan7 {
			chan-name = "lp5523:kb5";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan8 {
			chan-name = "lp5523:kb6";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};
	};

	bq27200: bq27200@55 {
		compatible = "ti,bq27200";
		reg = <0x55>;
	};

	tpa6130a2: tpa6130a2@60 {
		compatible = "ti,tpa6130a2";
		reg = <0x60>;

		Vdd-supply = <&vmmc2>;

		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};

/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins>;
	vmmc-supply = <&vaux3>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
	non-removable;
};

&mmc3 {
	status = "disabled";
};

&gpmc {
	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */

	/* gpio-irq for dma: 65 */

	onenand@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0 0 0x10000000>;

		gpmc,sync-read;
		gpmc,sync-write;
		gpmc,burst-length = <16>;
		gpmc,burst-read;
		gpmc,burst-wrap;
		gpmc,burst-write;
		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <87>;
		gpmc,cs-wr-off-ns = <87>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <10>;
		gpmc,adv-wr-off-ns = <10>;
		gpmc,oe-on-ns = <15>;
		gpmc,oe-off-ns = <87>;
		gpmc,we-on-ns = <0>;
		gpmc,we-off-ns = <87>;
		gpmc,rd-cycle-ns = <112>;
		gpmc,wr-cycle-ns = <112>;
		gpmc,access-ns = <81>;
		gpmc,page-burst-access-ns = <15>;
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,clk-activation-ns = <5>;
		gpmc,wr-data-mux-bus-ns = <30>;
		gpmc,wr-access-ns = <81>;
		gpmc,sync-clk-ps = <15000>;

		/*
		 * MTD partition table corresponding to Nokia's
		 * Maemo 5 (Fremantle) release.
		 */
		partition@0 {
			label = "bootloader";
			reg = <0x00000000 0x00020000>;
			read-only;
		};
		partition@1 {
			label = "config";
			reg = <0x00020000 0x00060000>;
		};
		partition@2 {
			label = "log";
			reg = <0x00080000 0x00040000>;
		};
		partition@3 {
			label = "kernel";
			reg = <0x000c0000 0x00200000>;
		};
		partition@4 {
			label = "initfs";
			reg = <0x002c0000 0x00200000>;
		};
		partition@5 {
			label = "rootfs";
			reg = <0x004c0000 0x0fb40000>;
		};
	};
};

&mcspi1 {
	/*
	 * For some reason, touchscreen is necessary for screen to work at
	 * all on real hw. It works well without it on emulator.
	 *
	 * Also... order in the device tree actually matters here.
	 */
	tsc2005@0 {
		compatible = "tsc2005";
		spi-max-frequency = <6000000>;
		reg = <0>;
	};
	mipid@2 {
		compatible = "acx565akm";
		spi-max-frequency = <6000000>;
		reg = <2>;

		pinctrl-names = "default";
		pinctrl-0 = <&display_pins>;
	};
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <2>;
	power = <50>;
};

&uart1 {
	status = "disabled";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};
Commit	Line	Data
a4d4b153 PM	1	/*
	2	* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
	3	* Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 (or later) as
	7	* published by the Free Software Foundation.
	8	*/
	9
	10	/dts-v1/;
	11
f2e2c9d9	12	#include "omap34xx-hs.dtsi"
a4d4b153 PM	13
	14	/ {
	15	model = "Nokia N900";
	16	compatible = "nokia,omap3-n900", "ti,omap3";
	17
	18	cpus {
	19	cpu@0 {
	20	cpu0-supply = <&vcc>;
	21	};
	22	};
	23
	24	memory {
	25	device_type = "memory";
	26	reg = <0x80000000 0x10000000>; /* 256 MB */
	27	};
	28
3931c839 SR	29	gpio_keys {
	30	compatible = "gpio-keys";
	31
	32	camera_lens_cover {
	33	label = "Camera Lens Cover";
	34	gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
	35	linux,input-type = <5>; /* EV_SW */
	36	linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
	37	gpio-key,wakeup;
	38	};
	39
	40	camera_focus {
	41	label = "Camera Focus";
	42	gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
	43	linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
	44	gpio-key,wakeup;
	45	};
	46
	47	camera_capture {
	48	label = "Camera Capture";
	49	gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
	50	linux,code = <0xd4>; /* KEY_CAMERA */
	51	gpio-key,wakeup;
	52	};
	53
	54	lock_button {
	55	label = "Lock Button";
	56	gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
	57	linux,code = <0x98>; /* KEY_SCREENLOCK */
	58	gpio-key,wakeup;
	59	};
	60
	61	keypad_slide {
	62	label = "Keypad Slide";
	63	gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
	64	linux,input-type = <5>; /* EV_SW */
	65	linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
	66	gpio-key,wakeup;
	67	};
	68
	69	proximity_sensor {
	70	label = "Proximity Sensor";
	71	gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
	72	linux,input-type = <5>; /* EV_SW */
	73	linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
	74	};
	75	};
	76
a4d4b153 PM	77	};
a4d4b153 PM	78
ac888a88 SR	79	&omap3_pmx_core {
	80	pinctrl-names = "default";
	81
7a89eecf SR	82	uart2_pins: pinmux_uart2_pins {
	83	pinctrl-single,pins = <
	84	0x14a (PIN_INPUT \| MUX_MODE0) /* uart2_rx */
	85	0x148 (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx */
	86	>;
	87	};
	88
	89	uart3_pins: pinmux_uart3_pins {
	90	pinctrl-single,pins = <
	91	0x16e (PIN_INPUT \| MUX_MODE0) /* uart3_rx */
	92	0x170 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx */
	93	>;
	94	};
	95
ac888a88 SR	96	i2c1_pins: pinmux_i2c1_pins {
	97	pinctrl-single,pins = <
	98	0x18a (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
	99	0x18c (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
	100	>;
	101	};
	102
	103	i2c2_pins: pinmux_i2c2_pins {
	104	pinctrl-single,pins = <
	105	0x18e (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
	106	0x190 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
	107	>;
	108	};
	109
	110	i2c3_pins: pinmux_i2c3_pins {
	111	pinctrl-single,pins = <
	112	0x192 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
	113	0x194 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
	114	>;
	115	};
f1751cff SR	116
	117	mmc1_pins: pinmux_mmc1_pins {
	118	pinctrl-single,pins = <
	119	0x114 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk */
	120	0x116 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd */
	121	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0 */
	122	0x11a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1 */
	123	0x11c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2 */
	124	0x11e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3 */
	125	>;
	126	};
d1e6f516	127
edd5eb4e TL	128	mmc2_pins: pinmux_mmc2_pins {
	129	pinctrl-single,pins = <
	130	0x128 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_clk */
	131	0x12a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_cmd */
	132	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat0 */
	133	0x12e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat1 */
	134	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat2 */
	135	0x132 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat3 */
	136	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat4 */
	137	0x136 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat5 */
	138	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat6 */
	139	0x13a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat7 */
	140	>;
	141	};
	142
d1e6f516 SR	143	display_pins: pinmux_display_pins {
	144	pinctrl-single,pins = <
	145	0x0d4 (PIN_OUTPUT \| MUX_MODE4) /* RX51_LCD_RESET_GPIO */
	146	>;
	147	};
ac888a88 SR	148	};
ac888a88 SR	149
a4d4b153	150	&i2c1 {
ac888a88 SR	151	pinctrl-names = "default";
	152	pinctrl-0 = <&i2c1_pins>;
	153
a4d4b153 PM	154	clock-frequency = <2200000>;
	155
	156	twl: twl@48 {
	157	reg = <0x48>;
	158	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	159	interrupt-parent = <&intc>;
	160	};
	161	};
	162
	163	#include "twl4030.dtsi"
ac888a88	164	#include "twl4030_omap3.dtsi"
a4d4b153	165
9cdbbadd SR	166	&vaux1 {
	167	regulator-name = "V28";
	168	regulator-min-microvolt = <2800000>;
	169	regulator-max-microvolt = <2800000>;
	170	regulator-always-on; /* due battery cover sensor */
	171	};
	172
	173	&vaux2 {
	174	regulator-name = "VCSI";
	175	regulator-min-microvolt = <1800000>;
	176	regulator-max-microvolt = <1800000>;
	177	};
	178
	179	&vaux3 {
	180	regulator-name = "VMMC2_30";
	181	regulator-min-microvolt = <2800000>;
	182	regulator-max-microvolt = <3000000>;
	183	};
	184
	185	&vaux4 {
	186	regulator-name = "VCAM_ANA_28";
	187	regulator-min-microvolt = <2800000>;
	188	regulator-max-microvolt = <2800000>;
	189	};
	190
	191	&vmmc1 {
	192	regulator-name = "VMMC1";
	193	regulator-min-microvolt = <1850000>;
	194	regulator-max-microvolt = <3150000>;
	195	};
	196
	197	&vmmc2 {
	198	regulator-name = "V28_A";
	199	regulator-min-microvolt = <2800000>;
	200	regulator-max-microvolt = <3000000>;
	201	regulator-always-on; /* due VIO leak to AIC34 VDDs */
	202	};
	203
	204	&vpll1 {
	205	regulator-name = "VPLL";
	206	regulator-min-microvolt = <1800000>;
	207	regulator-max-microvolt = <1800000>;
	208	regulator-always-on;
	209	};
	210
	211	&vpll2 {
	212	regulator-name = "VSDI_CSI";
	213	regulator-min-microvolt = <1800000>;
	214	regulator-max-microvolt = <1800000>;
	215	regulator-always-on;
	216	};
	217
	218	&vsim {
	219	regulator-name = "VMMC2_IO_18";
	220	regulator-min-microvolt = <1800000>;
	221	regulator-max-microvolt = <1800000>;
	222	};
	223
	224	&vio {
	225	regulator-name = "VIO";
	226	regulator-min-microvolt = <1800000>;
	227	regulator-max-microvolt = <1800000>;
	228
	229	};
230
231	&vintana1 {
232	regulator-name = "VINTANA1";
233	/* fixed to 1500000 */
234	regulator-always-on;
235	};
236
237	&vintana2 {
238	regulator-name = "VINTANA2";
239	regulator-min-microvolt = <2750000>;
240	regulator-max-microvolt = <2750000>;
241	regulator-always-on;
242	};
243
244	&vintdig {
245	regulator-name = "VINTDIG";
246	/* fixed to 1500000 */
247	regulator-always-on;
248	};
249
06ba7a61 SR	250	&twl {
	251	twl_audio: audio {
	252	compatible = "ti,twl4030-audio";
	253	ti,enable-vibra = <1>;
	254	};
	255	};
	256
85c215f3 SR	257	&twl_keypad {
	258	linux,keymap = < 0x00000010 /* KEY_Q */
	259	0x00010018 /* KEY_O */
	260	0x00020019 /* KEY_P */
	261	0x00030033 /* KEY_COMMA */
	262	0x0004000e /* KEY_BACKSPACE */
	263	0x0006001e /* KEY_A */
	264	0x0007001f /* KEY_S */
	265
	266	0x01000011 /* KEY_W */
	267	0x01010020 /* KEY_D */
	268	0x01020021 /* KEY_F */
	269	0x01030022 /* KEY_G */
	270	0x01040023 /* KEY_H */
	271	0x01050024 /* KEY_J */
	272	0x01060025 /* KEY_K */
	273	0x01070026 /* KEY_L */
	274
	275	0x02000012 /* KEY_E */
	276	0x02010034 /* KEY_DOT */
	277	0x02020067 /* KEY_UP */
	278	0x0203001c /* KEY_ENTER */
	279	0x0205002c /* KEY_Z */
	280	0x0206002d /* KEY_X */
	281	0x0207002e /* KEY_C */
	282	0x02080043 /* KEY_F9 */
	283
	284	0x03000013 /* KEY_R */
	285	0x0301002f /* KEY_V */
	286	0x03020030 /* KEY_B */
	287	0x03030031 /* KEY_N */
	288	0x03040032 /* KEY_M */
	289	0x03050039 /* KEY_SPACE */
	290	0x03060039 /* KEY_SPACE */
	291	0x03070069 /* KEY_LEFT */
	292
	293	0x04000014 /* KEY_T */
	294	0x0401006c /* KEY_DOWN */
	295	0x0402006a /* KEY_RIGHT */
	296	0x0404001d /* KEY_LEFTCTRL */
	297	0x04050064 /* KEY_RIGHTALT */
	298	0x0406002a /* KEY_LEFTSHIFT */
	299	0x04080044 /* KEY_F10 */
	300
	301	0x05000015 /* KEY_Y */
	302	0x05080057 /* KEY_F11 */
	303
	304	0x06000016 /* KEY_U */
	305
	306	0x07000017 /* KEY_I */
	307	0x07010041 /* KEY_F7 */
	308	0x07020042 /* KEY_F8 */
	309	>;
	310	};
	311
a4d4b153 PM	312	&twl_gpio {
	313	ti,pullups = <0x0>;
	314	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) \| BIT(8..17) */
	315	};
	316
	317	&i2c2 {
ac888a88 SR	318	pinctrl-names = "default";
	319	pinctrl-0 = <&i2c2_pins>;
	320
48fc9864	321	clock-frequency = <100000>;
b2b9b258	322
14e3e295 SR	323	tlv320aic3x: tlv320aic3x@18 {
	324	compatible = "ti,tlv320aic3x";
	325	reg = <0x18>;
	326	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	327	ai3x-gpio-func = <
	328	0 /* AIC3X_GPIO1_FUNC_DISABLED */
	329	5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
	330	>;
	331
	332	AVDD-supply = <&vmmc2>;
	333	DRVDD-supply = <&vmmc2>;
	334	IOVDD-supply = <&vio>;
	335	DVDD-supply = <&vio>;
	336	};
	337
	338	tlv320aic3x_aux: tlv320aic3x@19 {
	339	compatible = "ti,tlv320aic3x";
	340	reg = <0x19>;
	341	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	342
	343	AVDD-supply = <&vmmc2>;
	344	DRVDD-supply = <&vmmc2>;
	345	IOVDD-supply = <&vio>;
	346	DVDD-supply = <&vio>;
	347	};
	348
12f2f873 SR	349	tsl2563: tsl2563@29 {
	350	compatible = "amstaos,tsl2563";
	351	reg = <0x29>;
	352
	353	amstaos,cover-comp-gain = <16>;
	354	};
	355
a0bf1f3e SR	356	lp5523: lp5523@32 {
	357	compatible = "national,lp5523";
	358	reg = <0x32>;
	359	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
	360	enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
	361
	362	chan0 {
	363	chan-name = "lp5523:kb1";
	364	led-cur = /bits/ 8 <50>;
	365	max-cur = /bits/ 8 <100>;
	366	};
	367
	368	chan1 {
	369	chan-name = "lp5523:kb2";
	370	led-cur = /bits/ 8 <50>;
	371	max-cur = /bits/ 8 <100>;
	372	};
	373
	374	chan2 {
	375	chan-name = "lp5523:kb3";
	376	led-cur = /bits/ 8 <50>;
	377	max-cur = /bits/ 8 <100>;
	378	};
	379
	380	chan3 {
	381	chan-name = "lp5523:kb4";
	382	led-cur = /bits/ 8 <50>;
	383	max-cur = /bits/ 8 <100>;
	384	};
	385
	386	chan4 {
	387	chan-name = "lp5523:b";
	388	led-cur = /bits/ 8 <50>;
	389	max-cur = /bits/ 8 <100>;
	390	};
	391
	392	chan5 {
	393	chan-name = "lp5523:g";
	394	led-cur = /bits/ 8 <50>;
	395	max-cur = /bits/ 8 <100>;
	396	};
	397
	398	chan6 {
	399	chan-name = "lp5523:r";
	400	led-cur = /bits/ 8 <50>;
	401	max-cur = /bits/ 8 <100>;
	402	};
	403
	404	chan7 {
	405	chan-name = "lp5523:kb5";
	406	led-cur = /bits/ 8 <50>;
	407	max-cur = /bits/ 8 <100>;
	408	};
	409
	410	chan8 {
	411	chan-name = "lp5523:kb6";
	412	led-cur = /bits/ 8 <50>;
	413	max-cur = /bits/ 8 <100>;
	414	};
	415	};
	416
b2b9b258 SR	417	bq27200: bq27200@55 {
	418	compatible = "ti,bq27200";
	419	reg = <0x55>;
	420	};
9e2367c8 SR	421
	422	tpa6130a2: tpa6130a2@60 {
	423	compatible = "ti,tpa6130a2";
	424	reg = <0x60>;
	425
	426	Vdd-supply = <&vmmc2>;
	427
	428	power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
	429	};
a4d4b153 PM	430	};
	431
	432	&i2c3 {
ac888a88 SR	433	pinctrl-names = "default";
	434	pinctrl-0 = <&i2c3_pins>;
	435
48fc9864	436	clock-frequency = <400000>;
a4d4b153 PM	437	};
	438
	439	&mmc1 {
f1751cff SR	440	pinctrl-names = "default";
	441	pinctrl-0 = <&mmc1_pins>;
	442	vmmc-supply = <&vmmc1>;
	443	bus-width = <4>;
	444	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
a4d4b153 PM	445	};
a4d4b153 PM	446
edd5eb4e	447	/* most boards use vaux3, only some old versions use vmmc2 instead */
a4d4b153	448	&mmc2 {
edd5eb4e TL	449	pinctrl-names = "default";
	450	pinctrl-0 = <&mmc2_pins>;
	451	vmmc-supply = <&vaux3>;
	452	vmmc_aux-supply = <&vsim>;
	453	bus-width = <8>;
	454	non-removable;
a4d4b153 PM	455	};
	456
	457	&mmc3 {
	458	status = "disabled";
	459	};
	460
8699d2dd SR	461	&gpmc {
	462	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
	463
	464	/* gpio-irq for dma: 65 */
	465
	466	onenand@0,0 {
	467	#address-cells = <1>;
	468	#size-cells = <1>;
	469	reg = <0 0 0x10000000>;
	470
	471	gpmc,sync-read;
	472	gpmc,sync-write;
	473	gpmc,burst-length = <16>;
	474	gpmc,burst-read;
	475	gpmc,burst-wrap;
	476	gpmc,burst-write;
	477	gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
	478	gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
	479	gpmc,cs-on-ns = <0>;
	480	gpmc,cs-rd-off-ns = <87>;
	481	gpmc,cs-wr-off-ns = <87>;
	482	gpmc,adv-on-ns = <0>;
	483	gpmc,adv-rd-off-ns = <10>;
	484	gpmc,adv-wr-off-ns = <10>;
	485	gpmc,oe-on-ns = <15>;
	486	gpmc,oe-off-ns = <87>;
	487	gpmc,we-on-ns = <0>;
	488	gpmc,we-off-ns = <87>;
	489	gpmc,rd-cycle-ns = <112>;
	490	gpmc,wr-cycle-ns = <112>;
	491	gpmc,access-ns = <81>;
	492	gpmc,page-burst-access-ns = <15>;
	493	gpmc,bus-turnaround-ns = <0>;
	494	gpmc,cycle2cycle-delay-ns = <0>;
	495	gpmc,wait-monitoring-ns = <0>;
	496	gpmc,clk-activation-ns = <5>;
	497	gpmc,wr-data-mux-bus-ns = <30>;
	498	gpmc,wr-access-ns = <81>;
	499	gpmc,sync-clk-ps = <15000>;
	500
	501	/*
	502	* MTD partition table corresponding to Nokia's
	503	* Maemo 5 (Fremantle) release.
	504	*/
	505	partition@0 {
	506	label = "bootloader";
	507	reg = <0x00000000 0x00020000>;
	508	read-only;
	509	};
	510	partition@1 {
	511	label = "config";
	512	reg = <0x00020000 0x00060000>;
	513	};
	514	partition@2 {
	515	label = "log";
	516	reg = <0x00080000 0x00040000>;
	517	};
	518	partition@3 {
	519	label = "kernel";
	520	reg = <0x000c0000 0x00200000>;
	521	};
	522	partition@4 {
	523	label = "initfs";
	524	reg = <0x002c0000 0x00200000>;
525	};
526	partition@5 {
527	label = "rootfs";
528	reg = <0x004c0000 0x0fb40000>;
529	};
530	};
531	};
532
a4d4b153 PM	533	&mcspi1 {
	534	/*
	535	* For some reason, touchscreen is necessary for screen to work at
	536	* all on real hw. It works well without it on emulator.
	537	*
	538	* Also... order in the device tree actually matters here.
	539	*/
	540	tsc2005@0 {
	541	compatible = "tsc2005";
	542	spi-max-frequency = <6000000>;
	543	reg = <0>;
	544	};
	545	mipid@2 {
	546	compatible = "acx565akm";
	547	spi-max-frequency = <6000000>;
	548	reg = <2>;
d1e6f516 SR	549
	550	pinctrl-names = "default";
	551	pinctrl-0 = <&display_pins>;
a4d4b153 PM	552	};
	553	};
	554
	555	&usb_otg_hs {
	556	interface-type = <0>;
	557	usb-phy = <&usb2_phy>;
d2afcf09 RQ	558	phys = <&usb2_phy>;
d2afcf09 RQ	559	phy-names = "usb2-phy";
a4d4b153 PM	560	mode = <2>;
	561	power = <50>;
	562	};
7a89eecf SR	563
	564	&uart1 {
	565	status = "disabled";
	566	};
	567
	568	&uart2 {
	569	pinctrl-names = "default";
	570	pinctrl-0 = <&uart2_pins>;
	571	};
	572
	573	&uart3 {
	574	pinctrl-names = "default";
	575	pinctrl-0 = <&uart3_pins>;
	576	};