Commit | Line | Data |
---|---|---|
a4d4b153 PM |
1 | /* |
2 | * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> | |
c3580bc1 | 3 | * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> |
a4d4b153 PM |
4 | * |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License version 2 (or later) as | |
7 | * published by the Free Software Foundation. | |
8 | */ | |
9 | ||
10 | /dts-v1/; | |
11 | ||
f2e2c9d9 | 12 | #include "omap34xx-hs.dtsi" |
3fdb7717 | 13 | #include <dt-bindings/input/input.h> |
a4d4b153 PM |
14 | |
15 | / { | |
16 | model = "Nokia N900"; | |
c3580bc1 | 17 | compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; |
a4d4b153 PM |
18 | |
19 | cpus { | |
20 | cpu@0 { | |
21 | cpu0-supply = <&vcc>; | |
22 | }; | |
23 | }; | |
24 | ||
c1be2032 TL |
25 | leds { |
26 | compatible = "gpio-leds"; | |
27 | heartbeat { | |
28 | label = "debug::sleep"; | |
29 | gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ | |
30 | linux,default-trigger = "default-on"; | |
31 | pinctrl-names = "default"; | |
32 | pinctrl-0 = <&debug_leds>; | |
33 | }; | |
34 | }; | |
35 | ||
a4d4b153 PM |
36 | memory { |
37 | device_type = "memory"; | |
38 | reg = <0x80000000 0x10000000>; /* 256 MB */ | |
39 | }; | |
40 | ||
3931c839 SR |
41 | gpio_keys { |
42 | compatible = "gpio-keys"; | |
43 | ||
44 | camera_lens_cover { | |
45 | label = "Camera Lens Cover"; | |
46 | gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ | |
47 | linux,input-type = <5>; /* EV_SW */ | |
48 | linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ | |
49 | gpio-key,wakeup; | |
50 | }; | |
51 | ||
52 | camera_focus { | |
53 | label = "Camera Focus"; | |
54 | gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ | |
55 | linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ | |
56 | gpio-key,wakeup; | |
57 | }; | |
58 | ||
59 | camera_capture { | |
60 | label = "Camera Capture"; | |
61 | gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ | |
62 | linux,code = <0xd4>; /* KEY_CAMERA */ | |
63 | gpio-key,wakeup; | |
64 | }; | |
65 | ||
66 | lock_button { | |
67 | label = "Lock Button"; | |
68 | gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ | |
69 | linux,code = <0x98>; /* KEY_SCREENLOCK */ | |
70 | gpio-key,wakeup; | |
71 | }; | |
72 | ||
73 | keypad_slide { | |
74 | label = "Keypad Slide"; | |
75 | gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ | |
76 | linux,input-type = <5>; /* EV_SW */ | |
77 | linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ | |
78 | gpio-key,wakeup; | |
79 | }; | |
80 | ||
81 | proximity_sensor { | |
82 | label = "Proximity Sensor"; | |
83 | gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ | |
84 | linux,input-type = <5>; /* EV_SW */ | |
85 | linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ | |
86 | }; | |
87 | }; | |
88 | ||
e17337a2 SR |
89 | isp1704: isp1704 { |
90 | compatible = "nxp,isp1704"; | |
91 | nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; | |
92 | usb-phy = <&usb2_phy>; | |
93 | }; | |
1133420f TV |
94 | |
95 | tv: connector { | |
96 | compatible = "composite-connector"; | |
97 | label = "tv"; | |
98 | ||
99 | port { | |
100 | tv_connector_in: endpoint { | |
101 | remote-endpoint = <&venc_out>; | |
102 | }; | |
103 | }; | |
104 | }; | |
f7d0f2a0 SR |
105 | |
106 | sound: n900-audio { | |
107 | compatible = "nokia,n900-audio"; | |
108 | ||
109 | nokia,cpu-dai = <&mcbsp2>; | |
110 | nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; | |
111 | nokia,headphone-amplifier = <&tpa6130a2>; | |
112 | ||
113 | tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ | |
114 | jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ | |
115 | eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ | |
116 | speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; | |
117 | }; | |
a4d4b153 PM |
118 | }; |
119 | ||
ac888a88 SR |
120 | &omap3_pmx_core { |
121 | pinctrl-names = "default"; | |
122 | ||
7a89eecf SR |
123 | uart2_pins: pinmux_uart2_pins { |
124 | pinctrl-single,pins = < | |
125 | 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */ | |
126 | 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ | |
127 | >; | |
128 | }; | |
129 | ||
130 | uart3_pins: pinmux_uart3_pins { | |
131 | pinctrl-single,pins = < | |
132 | 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */ | |
133 | 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ | |
134 | >; | |
135 | }; | |
136 | ||
ac888a88 SR |
137 | i2c1_pins: pinmux_i2c1_pins { |
138 | pinctrl-single,pins = < | |
139 | 0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ | |
140 | 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ | |
141 | >; | |
142 | }; | |
143 | ||
144 | i2c2_pins: pinmux_i2c2_pins { | |
145 | pinctrl-single,pins = < | |
146 | 0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ | |
147 | 0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ | |
148 | >; | |
149 | }; | |
150 | ||
151 | i2c3_pins: pinmux_i2c3_pins { | |
152 | pinctrl-single,pins = < | |
153 | 0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ | |
154 | 0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ | |
155 | >; | |
156 | }; | |
f1751cff | 157 | |
c1be2032 TL |
158 | debug_leds: pinmux_debug_led_pins { |
159 | pinctrl-single,pins = < | |
160 | OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ | |
161 | >; | |
162 | }; | |
163 | ||
c1ad2206 SR |
164 | mcspi4_pins: pinmux_mcspi4_pins { |
165 | pinctrl-single,pins = < | |
166 | 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ | |
167 | 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ | |
168 | 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ | |
169 | 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ | |
170 | >; | |
171 | }; | |
172 | ||
f1751cff SR |
173 | mmc1_pins: pinmux_mmc1_pins { |
174 | pinctrl-single,pins = < | |
175 | 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ | |
176 | 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ | |
177 | 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ | |
178 | 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ | |
179 | 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ | |
180 | 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ | |
181 | >; | |
182 | }; | |
d1e6f516 | 183 | |
edd5eb4e TL |
184 | mmc2_pins: pinmux_mmc2_pins { |
185 | pinctrl-single,pins = < | |
186 | 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ | |
187 | 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ | |
188 | 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ | |
189 | 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ | |
190 | 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ | |
191 | 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ | |
192 | 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ | |
193 | 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ | |
194 | 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ | |
195 | 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ | |
196 | >; | |
197 | }; | |
198 | ||
1133420f | 199 | acx565akm_pins: pinmux_acx565akm_pins { |
d1e6f516 SR |
200 | pinctrl-single,pins = < |
201 | 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ | |
202 | >; | |
203 | }; | |
1133420f TV |
204 | |
205 | dss_sdi_pins: pinmux_dss_sdi_pins { | |
206 | pinctrl-single,pins = < | |
207 | 0x0c0 (PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ | |
208 | 0x0c2 (PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ | |
209 | 0x0c4 (PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ | |
210 | 0x0c6 (PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ | |
211 | ||
212 | 0x0d8 (PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ | |
213 | 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ | |
214 | >; | |
215 | }; | |
c1ad2206 SR |
216 | |
217 | wl1251_pins: pinmux_wl1251 { | |
218 | pinctrl-single,pins = < | |
219 | 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ | |
220 | 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ | |
221 | >; | |
222 | }; | |
782e25a4 SR |
223 | |
224 | ssi_pins: pinmux_ssi { | |
225 | pinctrl-single,pins = < | |
226 | 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ | |
227 | 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ | |
228 | 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ | |
229 | 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ | |
230 | 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ | |
231 | 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ | |
232 | 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ | |
233 | 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ | |
234 | >; | |
235 | }; | |
76ad4ac1 SR |
236 | |
237 | modem_pins: pinmux_modem { | |
238 | pinctrl-single,pins = < | |
239 | 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ | |
240 | 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ | |
241 | 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ | |
242 | 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ | |
243 | 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ | |
244 | 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ | |
245 | >; | |
246 | }; | |
ac888a88 SR |
247 | }; |
248 | ||
a4d4b153 | 249 | &i2c1 { |
ac888a88 SR |
250 | pinctrl-names = "default"; |
251 | pinctrl-0 = <&i2c1_pins>; | |
252 | ||
a4d4b153 PM |
253 | clock-frequency = <2200000>; |
254 | ||
255 | twl: twl@48 { | |
256 | reg = <0x48>; | |
257 | interrupts = <7>; /* SYS_NIRQ cascaded to intc */ | |
258 | interrupt-parent = <&intc>; | |
259 | }; | |
260 | }; | |
261 | ||
262 | #include "twl4030.dtsi" | |
ac888a88 | 263 | #include "twl4030_omap3.dtsi" |
a4d4b153 | 264 | |
9cdbbadd SR |
265 | &vaux1 { |
266 | regulator-name = "V28"; | |
267 | regulator-min-microvolt = <2800000>; | |
268 | regulator-max-microvolt = <2800000>; | |
269 | regulator-always-on; /* due battery cover sensor */ | |
270 | }; | |
271 | ||
272 | &vaux2 { | |
273 | regulator-name = "VCSI"; | |
274 | regulator-min-microvolt = <1800000>; | |
275 | regulator-max-microvolt = <1800000>; | |
276 | }; | |
277 | ||
278 | &vaux3 { | |
279 | regulator-name = "VMMC2_30"; | |
280 | regulator-min-microvolt = <2800000>; | |
281 | regulator-max-microvolt = <3000000>; | |
282 | }; | |
283 | ||
284 | &vaux4 { | |
285 | regulator-name = "VCAM_ANA_28"; | |
286 | regulator-min-microvolt = <2800000>; | |
287 | regulator-max-microvolt = <2800000>; | |
288 | }; | |
289 | ||
290 | &vmmc1 { | |
291 | regulator-name = "VMMC1"; | |
292 | regulator-min-microvolt = <1850000>; | |
293 | regulator-max-microvolt = <3150000>; | |
294 | }; | |
295 | ||
296 | &vmmc2 { | |
297 | regulator-name = "V28_A"; | |
298 | regulator-min-microvolt = <2800000>; | |
299 | regulator-max-microvolt = <3000000>; | |
300 | regulator-always-on; /* due VIO leak to AIC34 VDDs */ | |
301 | }; | |
302 | ||
303 | &vpll1 { | |
304 | regulator-name = "VPLL"; | |
305 | regulator-min-microvolt = <1800000>; | |
306 | regulator-max-microvolt = <1800000>; | |
307 | regulator-always-on; | |
308 | }; | |
309 | ||
310 | &vpll2 { | |
311 | regulator-name = "VSDI_CSI"; | |
312 | regulator-min-microvolt = <1800000>; | |
313 | regulator-max-microvolt = <1800000>; | |
314 | regulator-always-on; | |
315 | }; | |
316 | ||
317 | &vsim { | |
318 | regulator-name = "VMMC2_IO_18"; | |
319 | regulator-min-microvolt = <1800000>; | |
320 | regulator-max-microvolt = <1800000>; | |
321 | }; | |
322 | ||
323 | &vio { | |
324 | regulator-name = "VIO"; | |
325 | regulator-min-microvolt = <1800000>; | |
326 | regulator-max-microvolt = <1800000>; | |
327 | ||
328 | }; | |
329 | ||
330 | &vintana1 { | |
331 | regulator-name = "VINTANA1"; | |
332 | /* fixed to 1500000 */ | |
333 | regulator-always-on; | |
334 | }; | |
335 | ||
336 | &vintana2 { | |
337 | regulator-name = "VINTANA2"; | |
338 | regulator-min-microvolt = <2750000>; | |
339 | regulator-max-microvolt = <2750000>; | |
340 | regulator-always-on; | |
341 | }; | |
342 | ||
343 | &vintdig { | |
344 | regulator-name = "VINTDIG"; | |
345 | /* fixed to 1500000 */ | |
346 | regulator-always-on; | |
347 | }; | |
348 | ||
06ba7a61 SR |
349 | &twl { |
350 | twl_audio: audio { | |
351 | compatible = "ti,twl4030-audio"; | |
352 | ti,enable-vibra = <1>; | |
353 | }; | |
9188883f TL |
354 | |
355 | twl_power: power { | |
d937678a | 356 | compatible = "ti,twl4030-power-n900"; |
9188883f TL |
357 | ti,use_poweroff; |
358 | }; | |
06ba7a61 SR |
359 | }; |
360 | ||
85c215f3 | 361 | &twl_keypad { |
3fdb7717 SR |
362 | linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) |
363 | MATRIX_KEY(0x00, 0x01, KEY_O) | |
364 | MATRIX_KEY(0x00, 0x02, KEY_P) | |
365 | MATRIX_KEY(0x00, 0x03, KEY_COMMA) | |
366 | MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) | |
367 | MATRIX_KEY(0x00, 0x06, KEY_A) | |
368 | MATRIX_KEY(0x00, 0x07, KEY_S) | |
369 | ||
370 | MATRIX_KEY(0x01, 0x00, KEY_W) | |
371 | MATRIX_KEY(0x01, 0x01, KEY_D) | |
372 | MATRIX_KEY(0x01, 0x02, KEY_F) | |
373 | MATRIX_KEY(0x01, 0x03, KEY_G) | |
374 | MATRIX_KEY(0x01, 0x04, KEY_H) | |
375 | MATRIX_KEY(0x01, 0x05, KEY_J) | |
376 | MATRIX_KEY(0x01, 0x06, KEY_K) | |
377 | MATRIX_KEY(0x01, 0x07, KEY_L) | |
378 | ||
379 | MATRIX_KEY(0x02, 0x00, KEY_E) | |
380 | MATRIX_KEY(0x02, 0x01, KEY_DOT) | |
381 | MATRIX_KEY(0x02, 0x02, KEY_UP) | |
382 | MATRIX_KEY(0x02, 0x03, KEY_ENTER) | |
383 | MATRIX_KEY(0x02, 0x05, KEY_Z) | |
384 | MATRIX_KEY(0x02, 0x06, KEY_X) | |
385 | MATRIX_KEY(0x02, 0x07, KEY_C) | |
386 | MATRIX_KEY(0x02, 0x08, KEY_F9) | |
387 | ||
388 | MATRIX_KEY(0x03, 0x00, KEY_R) | |
389 | MATRIX_KEY(0x03, 0x01, KEY_V) | |
390 | MATRIX_KEY(0x03, 0x02, KEY_B) | |
391 | MATRIX_KEY(0x03, 0x03, KEY_N) | |
392 | MATRIX_KEY(0x03, 0x04, KEY_M) | |
393 | MATRIX_KEY(0x03, 0x05, KEY_SPACE) | |
394 | MATRIX_KEY(0x03, 0x06, KEY_SPACE) | |
395 | MATRIX_KEY(0x03, 0x07, KEY_LEFT) | |
396 | ||
397 | MATRIX_KEY(0x04, 0x00, KEY_T) | |
398 | MATRIX_KEY(0x04, 0x01, KEY_DOWN) | |
399 | MATRIX_KEY(0x04, 0x02, KEY_RIGHT) | |
400 | MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) | |
401 | MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) | |
402 | MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) | |
403 | MATRIX_KEY(0x04, 0x08, KEY_F10) | |
404 | ||
405 | MATRIX_KEY(0x05, 0x00, KEY_Y) | |
406 | MATRIX_KEY(0x05, 0x08, KEY_F11) | |
407 | ||
408 | MATRIX_KEY(0x06, 0x00, KEY_U) | |
409 | ||
410 | MATRIX_KEY(0x07, 0x00, KEY_I) | |
411 | MATRIX_KEY(0x07, 0x01, KEY_F7) | |
412 | MATRIX_KEY(0x07, 0x02, KEY_F8) | |
85c215f3 SR |
413 | >; |
414 | }; | |
415 | ||
a4d4b153 PM |
416 | &twl_gpio { |
417 | ti,pullups = <0x0>; | |
418 | ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ | |
419 | }; | |
420 | ||
421 | &i2c2 { | |
ac888a88 SR |
422 | pinctrl-names = "default"; |
423 | pinctrl-0 = <&i2c2_pins>; | |
424 | ||
48fc9864 | 425 | clock-frequency = <100000>; |
b2b9b258 | 426 | |
14e3e295 SR |
427 | tlv320aic3x: tlv320aic3x@18 { |
428 | compatible = "ti,tlv320aic3x"; | |
429 | reg = <0x18>; | |
430 | gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ | |
431 | ai3x-gpio-func = < | |
432 | 0 /* AIC3X_GPIO1_FUNC_DISABLED */ | |
433 | 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ | |
434 | >; | |
435 | ||
436 | AVDD-supply = <&vmmc2>; | |
437 | DRVDD-supply = <&vmmc2>; | |
438 | IOVDD-supply = <&vio>; | |
439 | DVDD-supply = <&vio>; | |
440 | }; | |
441 | ||
442 | tlv320aic3x_aux: tlv320aic3x@19 { | |
443 | compatible = "ti,tlv320aic3x"; | |
444 | reg = <0x19>; | |
445 | gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ | |
446 | ||
447 | AVDD-supply = <&vmmc2>; | |
448 | DRVDD-supply = <&vmmc2>; | |
449 | IOVDD-supply = <&vio>; | |
450 | DVDD-supply = <&vio>; | |
451 | }; | |
452 | ||
12f2f873 SR |
453 | tsl2563: tsl2563@29 { |
454 | compatible = "amstaos,tsl2563"; | |
455 | reg = <0x29>; | |
456 | ||
457 | amstaos,cover-comp-gain = <16>; | |
458 | }; | |
459 | ||
a0bf1f3e SR |
460 | lp5523: lp5523@32 { |
461 | compatible = "national,lp5523"; | |
462 | reg = <0x32>; | |
463 | clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ | |
464 | enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ | |
465 | ||
466 | chan0 { | |
467 | chan-name = "lp5523:kb1"; | |
468 | led-cur = /bits/ 8 <50>; | |
469 | max-cur = /bits/ 8 <100>; | |
470 | }; | |
471 | ||
472 | chan1 { | |
473 | chan-name = "lp5523:kb2"; | |
474 | led-cur = /bits/ 8 <50>; | |
475 | max-cur = /bits/ 8 <100>; | |
476 | }; | |
477 | ||
478 | chan2 { | |
479 | chan-name = "lp5523:kb3"; | |
480 | led-cur = /bits/ 8 <50>; | |
481 | max-cur = /bits/ 8 <100>; | |
482 | }; | |
483 | ||
484 | chan3 { | |
485 | chan-name = "lp5523:kb4"; | |
486 | led-cur = /bits/ 8 <50>; | |
487 | max-cur = /bits/ 8 <100>; | |
488 | }; | |
489 | ||
490 | chan4 { | |
491 | chan-name = "lp5523:b"; | |
492 | led-cur = /bits/ 8 <50>; | |
493 | max-cur = /bits/ 8 <100>; | |
494 | }; | |
495 | ||
496 | chan5 { | |
497 | chan-name = "lp5523:g"; | |
498 | led-cur = /bits/ 8 <50>; | |
499 | max-cur = /bits/ 8 <100>; | |
500 | }; | |
501 | ||
502 | chan6 { | |
503 | chan-name = "lp5523:r"; | |
504 | led-cur = /bits/ 8 <50>; | |
505 | max-cur = /bits/ 8 <100>; | |
506 | }; | |
507 | ||
508 | chan7 { | |
509 | chan-name = "lp5523:kb5"; | |
510 | led-cur = /bits/ 8 <50>; | |
511 | max-cur = /bits/ 8 <100>; | |
512 | }; | |
513 | ||
514 | chan8 { | |
515 | chan-name = "lp5523:kb6"; | |
516 | led-cur = /bits/ 8 <50>; | |
517 | max-cur = /bits/ 8 <100>; | |
518 | }; | |
519 | }; | |
520 | ||
b2b9b258 SR |
521 | bq27200: bq27200@55 { |
522 | compatible = "ti,bq27200"; | |
523 | reg = <0x55>; | |
524 | }; | |
9e2367c8 SR |
525 | |
526 | tpa6130a2: tpa6130a2@60 { | |
527 | compatible = "ti,tpa6130a2"; | |
528 | reg = <0x60>; | |
529 | ||
530 | Vdd-supply = <&vmmc2>; | |
531 | ||
532 | power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ | |
533 | }; | |
334a09c8 SR |
534 | |
535 | bq24150a: bq24150a@6b { | |
536 | compatible = "ti,bq24150a"; | |
537 | reg = <0x6b>; | |
538 | ||
539 | ti,current-limit = <100>; | |
540 | ti,weak-battery-voltage = <3400>; | |
541 | ti,battery-regulation-voltage = <4200>; | |
542 | ti,charge-current = <650>; | |
543 | ti,termination-current = <100>; | |
544 | ti,resistor-sense = <68>; | |
545 | ||
546 | ti,usb-charger-detection = <&isp1704>; | |
547 | }; | |
a4d4b153 PM |
548 | }; |
549 | ||
550 | &i2c3 { | |
ac888a88 SR |
551 | pinctrl-names = "default"; |
552 | pinctrl-0 = <&i2c3_pins>; | |
553 | ||
48fc9864 | 554 | clock-frequency = <400000>; |
a4d4b153 PM |
555 | }; |
556 | ||
557 | &mmc1 { | |
f1751cff SR |
558 | pinctrl-names = "default"; |
559 | pinctrl-0 = <&mmc1_pins>; | |
560 | vmmc-supply = <&vmmc1>; | |
561 | bus-width = <4>; | |
562 | cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ | |
a4d4b153 PM |
563 | }; |
564 | ||
edd5eb4e | 565 | /* most boards use vaux3, only some old versions use vmmc2 instead */ |
a4d4b153 | 566 | &mmc2 { |
edd5eb4e TL |
567 | pinctrl-names = "default"; |
568 | pinctrl-0 = <&mmc2_pins>; | |
569 | vmmc-supply = <&vaux3>; | |
570 | vmmc_aux-supply = <&vsim>; | |
571 | bus-width = <8>; | |
572 | non-removable; | |
a4d4b153 PM |
573 | }; |
574 | ||
575 | &mmc3 { | |
576 | status = "disabled"; | |
577 | }; | |
578 | ||
8699d2dd SR |
579 | &gpmc { |
580 | ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ | |
581 | ||
582 | /* gpio-irq for dma: 65 */ | |
583 | ||
584 | onenand@0,0 { | |
585 | #address-cells = <1>; | |
586 | #size-cells = <1>; | |
587 | reg = <0 0 0x10000000>; | |
588 | ||
589 | gpmc,sync-read; | |
590 | gpmc,sync-write; | |
591 | gpmc,burst-length = <16>; | |
592 | gpmc,burst-read; | |
593 | gpmc,burst-wrap; | |
594 | gpmc,burst-write; | |
595 | gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ | |
596 | gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ | |
597 | gpmc,cs-on-ns = <0>; | |
598 | gpmc,cs-rd-off-ns = <87>; | |
599 | gpmc,cs-wr-off-ns = <87>; | |
600 | gpmc,adv-on-ns = <0>; | |
601 | gpmc,adv-rd-off-ns = <10>; | |
602 | gpmc,adv-wr-off-ns = <10>; | |
603 | gpmc,oe-on-ns = <15>; | |
604 | gpmc,oe-off-ns = <87>; | |
605 | gpmc,we-on-ns = <0>; | |
606 | gpmc,we-off-ns = <87>; | |
607 | gpmc,rd-cycle-ns = <112>; | |
608 | gpmc,wr-cycle-ns = <112>; | |
609 | gpmc,access-ns = <81>; | |
610 | gpmc,page-burst-access-ns = <15>; | |
611 | gpmc,bus-turnaround-ns = <0>; | |
612 | gpmc,cycle2cycle-delay-ns = <0>; | |
613 | gpmc,wait-monitoring-ns = <0>; | |
614 | gpmc,clk-activation-ns = <5>; | |
615 | gpmc,wr-data-mux-bus-ns = <30>; | |
616 | gpmc,wr-access-ns = <81>; | |
617 | gpmc,sync-clk-ps = <15000>; | |
618 | ||
619 | /* | |
620 | * MTD partition table corresponding to Nokia's | |
621 | * Maemo 5 (Fremantle) release. | |
622 | */ | |
623 | partition@0 { | |
624 | label = "bootloader"; | |
625 | reg = <0x00000000 0x00020000>; | |
626 | read-only; | |
627 | }; | |
628 | partition@1 { | |
629 | label = "config"; | |
630 | reg = <0x00020000 0x00060000>; | |
631 | }; | |
632 | partition@2 { | |
633 | label = "log"; | |
634 | reg = <0x00080000 0x00040000>; | |
635 | }; | |
636 | partition@3 { | |
637 | label = "kernel"; | |
638 | reg = <0x000c0000 0x00200000>; | |
639 | }; | |
640 | partition@4 { | |
641 | label = "initfs"; | |
642 | reg = <0x002c0000 0x00200000>; | |
643 | }; | |
644 | partition@5 { | |
645 | label = "rootfs"; | |
646 | reg = <0x004c0000 0x0fb40000>; | |
647 | }; | |
648 | }; | |
649 | }; | |
650 | ||
a4d4b153 PM |
651 | &mcspi1 { |
652 | /* | |
653 | * For some reason, touchscreen is necessary for screen to work at | |
654 | * all on real hw. It works well without it on emulator. | |
655 | * | |
656 | * Also... order in the device tree actually matters here. | |
657 | */ | |
658 | tsc2005@0 { | |
50525891 | 659 | compatible = "ti,tsc2005"; |
a4d4b153 PM |
660 | spi-max-frequency = <6000000>; |
661 | reg = <0>; | |
50525891 SR |
662 | |
663 | vio-supply = <&vio>; | |
664 | ||
665 | reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ | |
666 | interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ | |
667 | ||
668 | touchscreen-fuzz-x = <4>; | |
669 | touchscreen-fuzz-y = <7>; | |
670 | touchscreen-fuzz-pressure = <2>; | |
671 | touchscreen-max-x = <4096>; | |
672 | touchscreen-max-y = <4096>; | |
673 | touchscreen-max-pressure = <2048>; | |
674 | ||
675 | ti,x-plate-ohms = <280>; | |
676 | ti,esd-recovery-timeout-ms = <8000>; | |
a4d4b153 | 677 | }; |
1133420f TV |
678 | |
679 | acx565akm@2 { | |
680 | compatible = "sony,acx565akm"; | |
a4d4b153 PM |
681 | spi-max-frequency = <6000000>; |
682 | reg = <2>; | |
d1e6f516 SR |
683 | |
684 | pinctrl-names = "default"; | |
1133420f TV |
685 | pinctrl-0 = <&acx565akm_pins>; |
686 | ||
687 | label = "lcd"; | |
688 | reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ | |
689 | ||
690 | port { | |
691 | lcd_in: endpoint { | |
692 | remote-endpoint = <&sdi_out>; | |
693 | }; | |
694 | }; | |
a4d4b153 PM |
695 | }; |
696 | }; | |
697 | ||
c1ad2206 SR |
698 | &mcspi4 { |
699 | pinctrl-names = "default"; | |
700 | pinctrl-0 = <&mcspi4_pins>; | |
701 | ||
702 | wl1251@0 { | |
703 | pinctrl-names = "default"; | |
704 | pinctrl-0 = <&wl1251_pins>; | |
705 | ||
706 | vio-supply = <&vio>; | |
707 | ||
708 | compatible = "ti,wl1251"; | |
709 | reg = <0>; | |
710 | spi-max-frequency = <48000000>; | |
711 | ||
712 | spi-cpol; | |
713 | spi-cpha; | |
714 | ||
715 | ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ | |
716 | ||
717 | interrupt-parent = <&gpio2>; | |
718 | interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ | |
719 | }; | |
720 | }; | |
721 | ||
a4d4b153 PM |
722 | &usb_otg_hs { |
723 | interface-type = <0>; | |
724 | usb-phy = <&usb2_phy>; | |
d2afcf09 RQ |
725 | phys = <&usb2_phy>; |
726 | phy-names = "usb2-phy"; | |
a4d4b153 PM |
727 | mode = <2>; |
728 | power = <50>; | |
729 | }; | |
7a89eecf SR |
730 | |
731 | &uart1 { | |
732 | status = "disabled"; | |
733 | }; | |
734 | ||
735 | &uart2 { | |
31f0820a | 736 | interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; |
7a89eecf SR |
737 | pinctrl-names = "default"; |
738 | pinctrl-0 = <&uart2_pins>; | |
739 | }; | |
740 | ||
741 | &uart3 { | |
31f0820a | 742 | interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; |
7a89eecf SR |
743 | pinctrl-names = "default"; |
744 | pinctrl-0 = <&uart3_pins>; | |
745 | }; | |
1133420f TV |
746 | |
747 | &dss { | |
748 | status = "ok"; | |
749 | ||
750 | pinctrl-names = "default"; | |
751 | pinctrl-0 = <&dss_sdi_pins>; | |
752 | ||
753 | vdds_sdi-supply = <&vaux1>; | |
754 | ||
755 | ports { | |
756 | #address-cells = <1>; | |
757 | #size-cells = <0>; | |
758 | ||
759 | port@1 { | |
760 | reg = <1>; | |
761 | ||
762 | sdi_out: endpoint { | |
763 | remote-endpoint = <&lcd_in>; | |
764 | datapairs = <2>; | |
765 | }; | |
766 | }; | |
767 | }; | |
768 | }; | |
769 | ||
770 | &venc { | |
771 | status = "ok"; | |
772 | ||
773 | vdda-supply = <&vdac>; | |
774 | ||
775 | port { | |
776 | venc_out: endpoint { | |
777 | remote-endpoint = <&tv_connector_in>; | |
778 | ti,channels = <1>; | |
779 | }; | |
780 | }; | |
781 | }; | |
f7d0f2a0 SR |
782 | |
783 | &mcbsp2 { | |
784 | status = "ok"; | |
785 | }; | |
782e25a4 SR |
786 | |
787 | &ssi_port1 { | |
788 | pinctrl-names = "default"; | |
789 | pinctrl-0 = <&ssi_pins>; | |
790 | ||
791 | ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ | |
76ad4ac1 SR |
792 | |
793 | modem: hsi-client { | |
794 | compatible = "nokia,n900-modem"; | |
795 | ||
796 | pinctrl-names = "default"; | |
797 | pinctrl-0 = <&modem_pins>; | |
798 | ||
799 | hsi-channel-ids = <0>, <1>, <2>, <3>; | |
800 | hsi-channel-names = "mcsaab-control", | |
801 | "speech-control", | |
802 | "speech-data", | |
803 | "mcsaab-data"; | |
804 | hsi-speed-kbps = <55000>; | |
805 | hsi-mode = "frame"; | |
806 | hsi-flow = "synchronized"; | |
807 | hsi-arb-mode = "round-robin"; | |
808 | ||
809 | interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ | |
810 | ||
811 | gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ | |
812 | <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ | |
813 | <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ | |
814 | <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ | |
815 | <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ | |
816 | gpio-names = "cmt_apeslpx", | |
817 | "cmt_rst_rq", | |
818 | "cmt_en", | |
819 | "cmt_rst", | |
820 | "cmt_bsi"; | |
821 | }; | |
782e25a4 SR |
822 | }; |
823 | ||
824 | &ssi_port2 { | |
825 | status = "disabled"; | |
76ad4ac1 | 826 | }; |