Commit | Line | Data |
---|---|---|
d2912cb1 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
c9940680 | 2 | /* |
b918bba0 | 3 | * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> |
c9940680 MB |
4 | */ |
5 | ||
6 | #include "omap3-gta04.dtsi" | |
7 | ||
8 | / { | |
acdf6035 | 9 | model = "Goldelico GTA04A5/Letux 2804"; |
c9940680 MB |
10 | |
11 | sound { | |
3bace6a4 | 12 | ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ |
c9940680 | 13 | }; |
4440f94d | 14 | |
61fedc14 NS |
15 | wlan_en: wlan_en_regulator { |
16 | compatible = "regulator-fixed"; | |
17 | pinctrl-names = "default"; | |
18 | pinctrl-0 = <&wlan_pins>; | |
19 | regulator-name = "wlan-en-regulator"; | |
20 | regulator-min-microvolt = <1800000>; | |
21 | regulator-max-microvolt = <1800000>; | |
22 | ||
23 | gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */ | |
24 | ||
25 | startup-delay-us = <70000>; | |
26 | enable-active-high; | |
27 | }; | |
28 | ||
4440f94d NS |
29 | pps { |
30 | compatible = "pps-gpio"; | |
31 | pinctrl-names = "default"; | |
32 | pinctrl-0 = <&pps_pins>; | |
33 | ||
34 | gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */ | |
35 | }; | |
36 | ||
37 | }; | |
38 | ||
43541bfa NS |
39 | &gpio5 { |
40 | irda_en { | |
41 | gpio-hog; | |
42 | gpios = <(175-160) GPIO_ACTIVE_HIGH>; | |
43 | output-high; /* activate gpio_175 to disable IrDA receiver */ | |
44 | }; | |
45 | }; | |
46 | ||
4440f94d | 47 | &omap3_pmx_core { |
2b5633eb NS |
48 | bt_pins: pinmux_bt_pins { |
49 | pinctrl-single,pins = < | |
50 | OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */ | |
51 | >; | |
52 | }; | |
53 | ||
61fedc14 NS |
54 | wlan_pins: pinmux_wlan_pins { |
55 | pinctrl-single,pins = < | |
56 | OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */ | |
57 | >; | |
58 | }; | |
59 | ||
60 | wlan_irq_pin: pinmux_wlan_irq_pin { | |
61 | pinctrl-single,pins = < | |
62 | OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */ | |
63 | >; | |
64 | }; | |
65 | ||
43541bfa NS |
66 | irda_pins: pinmux_irda { |
67 | pinctrl-single,pins = < | |
68 | OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */ | |
69 | >; | |
70 | }; | |
71 | ||
4440f94d NS |
72 | pps_pins: pinmux_pps_pins { |
73 | pinctrl-single,pins = < | |
74 | OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */ | |
75 | >; | |
76 | }; | |
77 | ||
c9940680 | 78 | }; |
61fedc14 NS |
79 | |
80 | /* | |
81 | * for WL183x module see | |
dd80f103 | 82 | * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt |
61fedc14 NS |
83 | */ |
84 | ||
85 | &wifi_pwrseq { | |
86 | /delete-property/ reset-gpios; | |
87 | }; | |
88 | ||
89 | &mmc2 { | |
90 | vmmc-supply = <&wlan_en>; | |
91 | bus-width = <4>; | |
92 | cap-power-off-card; | |
93 | non-removable; | |
94 | ||
95 | pinctrl-names = "default"; | |
96 | pinctrl-0 = <&wlan_irq_pin>; | |
97 | ||
98 | #address-cells = <1>; | |
99 | #size-cells = <0>; | |
100 | ||
101 | /delete-property/ mmc-pwrseq; | |
102 | ||
103 | wlcore: wlcore@2 { | |
104 | compatible = "ti,wl1837"; | |
105 | reg = <2>; | |
106 | interrupt-parent = <&gpio5>; | |
107 | interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */ | |
108 | ref-clock-frequency = <26000000>; | |
109 | }; | |
110 | }; | |
806c99ed NS |
111 | |
112 | &i2c2 { | |
113 | /delete-node/ bmp085@77; | |
114 | /delete-node/ bma180@41; | |
115 | /delete-node/ itg3200@68; | |
116 | /delete-node/ hmc5843@1e; | |
117 | ||
118 | bmg160@69 { | |
119 | compatible = "bosch,bmg160"; | |
120 | reg = <0x69>; | |
121 | }; | |
122 | ||
123 | bmc150@10 { | |
124 | compatible = "bosch,bmc150_accel"; | |
125 | reg = <0x10>; | |
126 | }; | |
127 | ||
128 | bmc150@12 { | |
129 | compatible = "bosch,bmc150_magn"; | |
130 | reg = <0x12>; | |
131 | }; | |
132 | ||
133 | bme280@76 { | |
134 | compatible = "bosch,bme280"; | |
135 | reg = <0x76>; | |
136 | }; | |
137 | }; |