[linux-2.6-block.git] / arch / arm / boot / dts / omap3-evm-common.dtsi

// SPDX-License-Identifier: GPL-2.0
/*
 * Common support for omap3 EVM boards
 */

#include <dt-bindings/input/input.h>
#include "omap-gpmc-smsc911x.dtsi"

/ {
	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	/* HS USB Port 2 Power */
	hsusb2_power: hsusb2_power_reg {
		compatible = "regulator-fixed";
		regulator-name = "hsusb2_vbus";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
		startup-delay-us = <70000>;
		enable-active-high;
	};

	/* HS USB Host PHY on PORT 2 */
	hsusb2_phy: hsusb2_phy {
		compatible = "usb-nop-xceiv";
		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
		vcc-supply = <&hsusb2_power>;
		#phy-cells = <0>;
	};

	leds {
		compatible = "gpio-leds";
		ledb {
			label = "omap3evm::ledb";
			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
			linux,default-trigger = "default-on";
		};
	};

	wl12xx_vmmc: wl12xx_vmmc {
		compatible = "regulator-fixed";
		regulator-name = "vwl1271";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
		startup-delay-us = <70000>;
		enable-active-high;
		vin-supply = <&vmmc2>;
	};
};

&i2c1 {
	clock-frequency = <2600000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
#include "omap3-panel-sharp-ls037v7dw01.dtsi"

&backlight0 {
	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
};

&twl {
	twl_power: power {
		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
		ti,use_poweroff;
	};
};

&i2c2 {
	clock-frequency = <400000>;
};

&i2c3 {
	clock-frequency = <400000>;

	/*
	 * TVP5146 Video decoder-in for analog input support.
	 */
	tvp5146@5c {
		compatible = "ti,tvp5146m2";
		reg = <0x5c>;
	};
};

&lcd_3v3 {
	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
};

&lcd0 {
	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
};

&mcspi1 {
	tsc2046@0 {
		interrupt-parent = <&gpio6>;
		interrupts = <15 0>;		/* gpio175 */
		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
	};
};

&mmc1 {
	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
	vmmc-supply = <&vmmc1>;
	vqmmc-supply = <&vsim>;
	bus-width = <8>;
};

&mmc2 {
	vmmc-supply = <&wl12xx_vmmc>;
	non-removable;
	bus-width = <4>;
	cap-power-off-card;

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1271";
		reg = <2>;
		interrupt-parent = <&gpio5>;
		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
		ref-clock-frequency = <38400000>;
	};
};

&twl_gpio {
	ti,use-leds;
};

&twl_keypad {
	linux,keymap = <
			MATRIX_KEY(2, 2, KEY_1)
			MATRIX_KEY(1, 1, KEY_2)
			MATRIX_KEY(0, 0, KEY_3)
			MATRIX_KEY(3, 2, KEY_4)
			MATRIX_KEY(2, 1, KEY_5)
			MATRIX_KEY(1, 0, KEY_6)
			MATRIX_KEY(1, 3, KEY_7)
			MATRIX_KEY(3, 1, KEY_8)
			MATRIX_KEY(2, 0, KEY_9)
			MATRIX_KEY(2, 3, KEY_KPASTERISK)
			MATRIX_KEY(0, 2, KEY_0)
			MATRIX_KEY(3, 0, KEY_KPDOT)
			/* s4 not wired */
			MATRIX_KEY(1, 2, KEY_BACKSPACE)
			MATRIX_KEY(0, 1, KEY_ENTER)
			>;
};

&usbhshost {
	port2-mode = "ehci-phy";
};

&usbhsehci {
	phys = <0 &hsusb2_phy>;
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <3>;
	power = <50>;
};

&gpmc {
	ethernet@gpmc {
		interrupt-parent = <&gpio6>;
		interrupts = <16 8>;
		reg = <5 0 0xff>;
	};
};

&vaux2 {
	regulator-name = "usb_1v8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};
Commit	Line	Data
b2441318	1	// SPDX-License-Identifier: GPL-2.0
465ce68b TL	2	/*
	3	* Common support for omap3 EVM boards
	4	*/
	5
8cf747f1	6	#include <dt-bindings/input/input.h>
5992234b TL	7	#include "omap-gpmc-smsc911x.dtsi"
5992234b TL	8
465ce68b TL	9	/ {
	10	cpus {
	11	cpu@0 {
	12	cpu0-supply = <&vcc>;
	13	};
	14	};
	15
05306b84 TL	16	/* HS USB Port 2 Power */
	17	hsusb2_power: hsusb2_power_reg {
	18	compatible = "regulator-fixed";
	19	regulator-name = "hsusb2_vbus";
	20	regulator-min-microvolt = <3300000>;
	21	regulator-max-microvolt = <3300000>;
	22	gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
	23	startup-delay-us = <70000>;
	24	enable-active-high;
	25	};
	26
	27	/* HS USB Host PHY on PORT 2 */
	28	hsusb2_phy: hsusb2_phy {
	29	compatible = "usb-nop-xceiv";
	30	reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
	31	vcc-supply = <&hsusb2_power>;
f568f6f5	32	#phy-cells = <0>;
05306b84 TL	33	};
05306b84 TL	34
465ce68b TL	35	leds {
	36	compatible = "gpio-leds";
	37	ledb {
	38	label = "omap3evm::ledb";
	39	gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
	40	linux,default-trigger = "default-on";
	41	};
	42	};
5992234b TL	43
	44	wl12xx_vmmc: wl12xx_vmmc {
	45	compatible = "regulator-fixed";
	46	regulator-name = "vwl1271";
	47	regulator-min-microvolt = <1800000>;
	48	regulator-max-microvolt = <1800000>;
3a637e00	49	gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
5992234b TL	50	startup-delay-us = <70000>;
	51	enable-active-high;
	52	vin-supply = <&vmmc2>;
	53	};
465ce68b TL	54	};
	55
	56	&i2c1 {
	57	clock-frequency = <2600000>;
	58
	59	twl: twl@48 {
	60	reg = <0x48>;
	61	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	62	interrupt-parent = <&intc>;
	63	};
	64	};
	65
	66	#include "twl4030.dtsi"
	67	#include "twl4030_omap3.dtsi"
bc10f310 TL	68	#include "omap3-panel-sharp-ls037v7dw01.dtsi"
	69
	70	&backlight0 {
	71	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
	72	};
465ce68b	73
9188883f TL	74	&twl {
	75	twl_power: power {
	76	compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
	77	ti,use_poweroff;
	78	};
	79	};
	80
465ce68b TL	81	&i2c2 {
	82	clock-frequency = <400000>;
	83	};
	84
	85	&i2c3 {
	86	clock-frequency = <400000>;
	87
	88	/*
	89	* TVP5146 Video decoder-in for analog input support.
	90	*/
	91	tvp5146@5c {
	92	compatible = "ti,tvp5146m2";
	93	reg = <0x5c>;
	94	};
	95	};
	96
bc10f310 TL	97	&lcd_3v3 {
bc10f310 TL	98	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
bc10f310 TL	99	};
	100
	101	&lcd0 {
	102	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
	103	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
	104	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
	105	&gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
	106	&gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
	107	};
	108
	109	&mcspi1 {
	110	tsc2046@0 {
	111	interrupt-parent = <&gpio6>;
	112	interrupts = <15 0>; /* gpio175 */
3a637e00	113	pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
bc10f310 TL	114	};
	115	};
	116
5992234b	117	&mmc1 {
3704aae9	118	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
5992234b	119	vmmc-supply = <&vmmc1>;
45ea75eb	120	vqmmc-supply = <&vsim>;
5992234b TL	121	bus-width = <8>;
	122	};
	123
	124	&mmc2 {
	125	vmmc-supply = <&wl12xx_vmmc>;
	126	non-removable;
	127	bus-width = <4>;
	128	cap-power-off-card;
99f84cae EP	129
	130	#address-cells = <1>;
	131	#size-cells = <0>;
	132	wlcore: wlcore@2 {
	133	compatible = "ti,wl1271";
	134	reg = <2>;
	135	interrupt-parent = <&gpio5>;
	136	interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
	137	ref-clock-frequency = <38400000>;
	138	};
5992234b TL	139	};
5992234b TL	140
465ce68b TL	141	&twl_gpio {
	142	ti,use-leds;
	143	};
	144
8cf747f1 TL	145	&twl_keypad {
	146	linux,keymap = <
	147	MATRIX_KEY(2, 2, KEY_1)
	148	MATRIX_KEY(1, 1, KEY_2)
	149	MATRIX_KEY(0, 0, KEY_3)
	150	MATRIX_KEY(3, 2, KEY_4)
	151	MATRIX_KEY(2, 1, KEY_5)
	152	MATRIX_KEY(1, 0, KEY_6)
	153	MATRIX_KEY(1, 3, KEY_7)
	154	MATRIX_KEY(3, 1, KEY_8)
	155	MATRIX_KEY(2, 0, KEY_9)
	156	MATRIX_KEY(2, 3, KEY_KPASTERISK)
	157	MATRIX_KEY(0, 2, KEY_0)
	158	MATRIX_KEY(3, 0, KEY_KPDOT)
	159	/* s4 not wired */
	160	MATRIX_KEY(1, 2, KEY_BACKSPACE)
	161	MATRIX_KEY(0, 1, KEY_ENTER)
	162	>;
	163	};
	164
05306b84 TL	165	&usbhshost {
	166	port2-mode = "ehci-phy";
	167	};
	168
	169	&usbhsehci {
	170	phys = <0 &hsusb2_phy>;
	171	};
	172
465ce68b TL	173	&usb_otg_hs {
	174	interface-type = <0>;
	175	usb-phy = <&usb2_phy>;
f9efbce6 LT	176	phys = <&usb2_phy>;
f9efbce6 LT	177	phy-names = "usb2-phy";
465ce68b TL	178	mode = <3>;
	179	power = <50>;
	180	};
5992234b TL	181
	182	&gpmc {
	183	ethernet@gpmc {
	184	interrupt-parent = <&gpio6>;
	185	interrupts = <16 8>;
	186	reg = <5 0 0xff>;
	187	};
	188	};
05306b84 TL	189
	190	&vaux2 {
	191	regulator-name = "usb_1v8";
	192	regulator-min-microvolt = <1800000>;
	193	regulator-max-microvolt = <1800000>;
	194	regulator-always-on;
	195	};