[linux-2.6-block.git] / arch / arm / boot / dts / motorola-cpcap-mapphone.dtsi

/*
 * Common CPCAP configuration used on Motorola phones
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

&mcspi1 {
	cpcap: pmic@0 {
		compatible = "motorola,cpcap", "st,6556002";
		reg = <0>;	/* cs0 */
		interrupt-parent = <&gpio1>;
		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-controller;
		#interrupt-cells = <2>;
		#address-cells = <1>;
		#size-cells = <0>;
		spi-max-frequency = <3000000>;
		spi-cs-high;

		cpcap_adc: adc {
			compatible = "motorola,mapphone-cpcap-adc";
			interrupts-extended = <&cpcap 8 0>;
			interrupt-names = "adcdone";
			#io-channel-cells = <1>;
		};

		cpcap_battery: battery {
			compatible = "motorola,cpcap-battery";
			interrupts-extended = <
				&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
				&cpcap 20 0 &cpcap 54 0
			>;
			interrupt-names =
				"eol", "lowbph", "lowbpl",
				"chrgcurr1", "battdetb";
			io-channels = <&cpcap_adc 0 &cpcap_adc 1
				       &cpcap_adc 5 &cpcap_adc 6>;
			io-channel-names = "battdetb", "battp",
					   "chg_isense", "batti";
			power-supplies = <&cpcap_charger>;
		};

		cpcap_charger: charger {
			compatible = "motorola,mapphone-cpcap-charger";
			interrupts-extended = <
				&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
				&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
			>;
			interrupt-names =
				"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
				"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
				      &gpio3 23 GPIO_ACTIVE_LOW>;
			io-channels = <&cpcap_adc 0 &cpcap_adc 1
				       &cpcap_adc 2 &cpcap_adc 5
				       &cpcap_adc 6>;
			io-channel-names = "battdetb", "battp",
					   "vbus", "chg_isense",
					   "batti";
		};

		cpcap_regulator: regulator {
			compatible = "motorola,mapphone-cpcap-regulator";

			cpcap_regulators: regulators {
			};
		};

		cpcap_rtc: rtc {
			compatible = "motorola,cpcap-rtc";

			interrupt-parent = <&cpcap>;
			interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
		};

		power_button: button {
			compatible = "motorola,cpcap-pwrbutton";

			interrupts = <23 IRQ_TYPE_NONE>;
		};

		cpcap_usb2_phy: phy {
			compatible = "motorola,mapphone-cpcap-usb-phy";
			pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
			pinctrl-1 = <&usb_ulpi_pins>;
			pinctrl-2 = <&usb_utmi_pins>;
			pinctrl-3 = <&uart3_pins>;
			pinctrl-names = "default", "ulpi", "utmi", "uart";
			#phy-cells = <0>;
			interrupts-extended = <
				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
				&cpcap 48 1
			>;
			interrupt-names =
				"id_ground", "id_float", "se0conn", "vbusvld",
				"sessvld", "sessend", "se1", "dm", "dp";
			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
				      &gpio1 0 GPIO_ACTIVE_HIGH>;
			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
			io-channel-names = "vbus", "id";
			vusb-supply = <&vusb>;
		};

		led_red: led-red {
			compatible = "motorola,cpcap-led-red";
			vdd-supply = <&sw5>;
			label = "status-led:red";
		};

		led_green: led-green {
			compatible = "motorola,cpcap-led-green";
			vdd-supply = <&sw5>;
			label = "status-led:green";
		};

		led_blue: led-blue {
			compatible = "motorola,cpcap-led-blue";
			vdd-supply = <&sw5>;
			label = "status-led:blue";
		};

		led_adl: led-adl {
			compatible = "motorola,cpcap-led-adl";
			vdd-supply = <&sw5>;
			label = "button-backlight";
		};

		led_cp: led-cp {
			compatible = "motorola,cpcap-led-cp";
			vdd-supply = <&sw5>;
			label = "shift-key-light";
		};
	};
};

&cpcap_regulators {
	sw5: SW5 {
		regulator-min-microvolt = <5050000>;
		regulator-max-microvolt = <5050000>;
		regulator-enable-ramp-delay = <50000>;
		regulator-boot-on;
	};

	vcam: VCAM {
		regulator-min-microvolt = <2900000>;
		regulator-max-microvolt = <2900000>;
		regulator-enable-ramp-delay = <1000>;
	};

	/* Used by DSS */
	vcsi: VCSI {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-enable-ramp-delay = <1000>;
		regulator-boot-on;
	};

	vdac: VDAC {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vdig: VDIG {
		regulator-min-microvolt = <1875000>;
		regulator-max-microvolt = <1875000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vfuse: VFUSE {
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <3150000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vhvio: VHVIO {
		regulator-min-microvolt = <2775000>;
		regulator-max-microvolt = <2775000>;
		regulator-enable-ramp-delay = <1000>;
		regulator-always-on;
	};

	/* Used by eMMC at mmc2 */
	vsdio: VSDIO {
		regulator-min-microvolt = <2900000>;
		regulator-max-microvolt = <2900000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vpll: VPLL {
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1800000>;
		regulator-enable-ramp-delay = <100>;
	};

	vrf1: VRF1 {
		regulator-min-microvolt = <2775000>;
		regulator-max-microvolt = <2775000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vrf2: VRF2 {
		regulator-min-microvolt = <2775000>;
		regulator-max-microvolt = <2775000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vrfref: VRFREF {
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2775000>;
		regulator-enable-ramp-delay = <100>;
	};

	vwlan1: VWLAN1 {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1900000>;
		regulator-enable-ramp-delay = <1000>;
	};

	/* Used by micro-SDIO at mmc1 */
	vwlan2: VWLAN2 {
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3000000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vsim: VSIM {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <2900000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vsimcard: VSIMCARD {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <2900000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vvib: VVIB {
		regulator-min-microvolt = <1300000>;
		regulator-max-microvolt = <3000000>;
		regulator-enable-ramp-delay = <500>;
	};

	vusb: VUSB {
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-enable-ramp-delay = <1000>;
	};

	vaudio: VAUDIO {
		regulator-min-microvolt = <2775000>;
		regulator-max-microvolt = <2775000>;
		regulator-enable-ramp-delay = <1000>;
	};
};
Commit	Line	Data
0d4cb3cc TL	1	/*
	2	* Common CPCAP configuration used on Motorola phones
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8
	9	&mcspi1 {
	10	cpcap: pmic@0 {
	11	compatible = "motorola,cpcap", "st,6556002";
	12	reg = <0>; /* cs0 */
	13	interrupt-parent = <&gpio1>;
4fd14a49	14	interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
0d4cb3cc TL	15	interrupt-controller;
	16	#interrupt-cells = <2>;
	17	#address-cells = <1>;
	18	#size-cells = <0>;
	19	spi-max-frequency = <3000000>;
	20	spi-cs-high;
	21
94b9a8a6 TL	22	cpcap_adc: adc {
	23	compatible = "motorola,mapphone-cpcap-adc";
	24	interrupts-extended = <&cpcap 8 0>;
	25	interrupt-names = "adcdone";
	26	#io-channel-cells = <1>;
	27	};
	28
c3d28e53 TL	29	cpcap_battery: battery {
	30	compatible = "motorola,cpcap-battery";
	31	interrupts-extended = <
	32	&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
	33	&cpcap 20 0 &cpcap 54 0
	34	>;
	35	interrupt-names =
	36	"eol", "lowbph", "lowbpl",
	37	"chrgcurr1", "battdetb";
	38	io-channels = <&cpcap_adc 0 &cpcap_adc 1
	39	&cpcap_adc 5 &cpcap_adc 6>;
	40	io-channel-names = "battdetb", "battp",
	41	"chg_isense", "batti";
	42	power-supplies = <&cpcap_charger>;
	43	};
	44
8a1a6259 TL	45	cpcap_charger: charger {
	46	compatible = "motorola,mapphone-cpcap-charger";
	47	interrupts-extended = <
	48	&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
	49	&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
	50	>;
	51	interrupt-names =
	52	"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
	53	"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
	54	mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
	55	&gpio3 23 GPIO_ACTIVE_LOW>;
	56	io-channels = <&cpcap_adc 0 &cpcap_adc 1
	57	&cpcap_adc 2 &cpcap_adc 5
	58	&cpcap_adc 6>;
	59	io-channel-names = "battdetb", "battp",
	60	"vbus", "chg_isense",
	61	"batti";
	62	};
	63
0d4cb3cc TL	64	cpcap_regulator: regulator {
	65	compatible = "motorola,mapphone-cpcap-regulator";
	66
	67	cpcap_regulators: regulators {
	68	};
	69	};
45ce6cf0 SR	70
	71	cpcap_rtc: rtc {
	72	compatible = "motorola,cpcap-rtc";
	73
	74	interrupt-parent = <&cpcap>;
	75	interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
	76	};
594e808b SR	77
	78	power_button: button {
	79	compatible = "motorola,cpcap-pwrbutton";
	80
	81	interrupts = <23 IRQ_TYPE_NONE>;
	82	};
836a0b0b	83
8434fbef TL	84	cpcap_usb2_phy: phy {
	85	compatible = "motorola,mapphone-cpcap-usb-phy";
	86	pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
	87	pinctrl-1 = <&usb_ulpi_pins>;
	88	pinctrl-2 = <&usb_utmi_pins>;
	89	pinctrl-3 = <&uart3_pins>;
	90	pinctrl-names = "default", "ulpi", "utmi", "uart";
	91	#phy-cells = <0>;
	92	interrupts-extended = <
	93	&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
	94	&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
	95	&cpcap 48 1
	96	>;
	97	interrupt-names =
	98	"id_ground", "id_float", "se0conn", "vbusvld",
	99	"sessvld", "sessend", "se1", "dm", "dp";
	100	mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
	101	&gpio1 0 GPIO_ACTIVE_HIGH>;
	102	io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
	103	io-channel-names = "vbus", "id";
	104	vusb-supply = <&vusb>;
	105	};
	106
836a0b0b SR	107	led_red: led-red {
	108	compatible = "motorola,cpcap-led-red";
	109	vdd-supply = <&sw5>;
	110	label = "status-led:red";
	111	};
	112
	113	led_green: led-green {
	114	compatible = "motorola,cpcap-led-green";
	115	vdd-supply = <&sw5>;
	116	label = "status-led:green";
	117	};
	118
	119	led_blue: led-blue {
	120	compatible = "motorola,cpcap-led-blue";
	121	vdd-supply = <&sw5>;
	122	label = "status-led:blue";
	123	};
	124
	125	led_adl: led-adl {
	126	compatible = "motorola,cpcap-led-adl";
	127	vdd-supply = <&sw5>;
	128	label = "button-backlight";
	129	};
	130
	131	led_cp: led-cp {
	132	compatible = "motorola,cpcap-led-cp";
	133	vdd-supply = <&sw5>;
	134	label = "shift-key-light";
	135	};
0d4cb3cc TL	136	};
	137	};
	138
	139	&cpcap_regulators {
	140	sw5: SW5 {
	141	regulator-min-microvolt = <5050000>;
	142	regulator-max-microvolt = <5050000>;
	143	regulator-enable-ramp-delay = <50000>;
	144	regulator-boot-on;
	145	};
	146
	147	vcam: VCAM {
	148	regulator-min-microvolt = <2900000>;
	149	regulator-max-microvolt = <2900000>;
	150	regulator-enable-ramp-delay = <1000>;
	151	};
	152
	153	/* Used by DSS */
	154	vcsi: VCSI {
	155	regulator-min-microvolt = <1800000>;
	156	regulator-max-microvolt = <1800000>;
	157	regulator-enable-ramp-delay = <1000>;
	158	regulator-boot-on;
	159	};
	160
	161	vdac: VDAC {
	162	regulator-min-microvolt = <1800000>;
	163	regulator-max-microvolt = <1800000>;
	164	regulator-enable-ramp-delay = <1000>;
	165	};
	166
	167	vdig: VDIG {
	168	regulator-min-microvolt = <1875000>;
	169	regulator-max-microvolt = <1875000>;
	170	regulator-enable-ramp-delay = <1000>;
	171	};
	172
	173	vfuse: VFUSE {
	174	regulator-min-microvolt = <1500000>;
	175	regulator-max-microvolt = <3150000>;
	176	regulator-enable-ramp-delay = <1000>;
	177	};
	178
	179	vhvio: VHVIO {
	180	regulator-min-microvolt = <2775000>;
	181	regulator-max-microvolt = <2775000>;
	182	regulator-enable-ramp-delay = <1000>;
	183	regulator-always-on;
	184	};
	185
	186	/* Used by eMMC at mmc2 */
	187	vsdio: VSDIO {
	188	regulator-min-microvolt = <2900000>;
	189	regulator-max-microvolt = <2900000>;
	190	regulator-enable-ramp-delay = <1000>;
	191	};
	192
	193	vpll: VPLL {
	194	regulator-min-microvolt = <1200000>;
	195	regulator-max-microvolt = <1800000>;
	196	regulator-enable-ramp-delay = <100>;
	197	};
	198
	199	vrf1: VRF1 {
200	regulator-min-microvolt = <2775000>;
201	regulator-max-microvolt = <2775000>;
202	regulator-enable-ramp-delay = <1000>;
203	};
204
205	vrf2: VRF2 {
206	regulator-min-microvolt = <2775000>;
207	regulator-max-microvolt = <2775000>;
208	regulator-enable-ramp-delay = <1000>;
209	};
210
211	vrfref: VRFREF {
212	regulator-min-microvolt = <2500000>;
213	regulator-max-microvolt = <2775000>;
214	regulator-enable-ramp-delay = <100>;
215	};
216
217	vwlan1: VWLAN1 {
218	regulator-min-microvolt = <1800000>;
219	regulator-max-microvolt = <1900000>;
220	regulator-enable-ramp-delay = <1000>;
221	};
222
26bfad63	223	/* Used by micro-SDIO at mmc1 */
0d4cb3cc TL	224	vwlan2: VWLAN2 {
	225	regulator-min-microvolt = <3000000>;
	226	regulator-max-microvolt = <3000000>;
	227	regulator-enable-ramp-delay = <1000>;
	228	};
	229
	230	vsim: VSIM {
	231	regulator-min-microvolt = <1800000>;
	232	regulator-max-microvolt = <2900000>;
	233	regulator-enable-ramp-delay = <1000>;
	234	};
	235
0d4cb3cc TL	236	vsimcard: VSIMCARD {
	237	regulator-min-microvolt = <1800000>;
	238	regulator-max-microvolt = <2900000>;
	239	regulator-enable-ramp-delay = <1000>;
	240	};
	241
	242	vvib: VVIB {
	243	regulator-min-microvolt = <1300000>;
	244	regulator-max-microvolt = <3000000>;
	245	regulator-enable-ramp-delay = <500>;
	246	};
	247
	248	vusb: VUSB {
	249	regulator-min-microvolt = <3300000>;
	250	regulator-max-microvolt = <3300000>;
	251	regulator-enable-ramp-delay = <1000>;
	252	};
	253
	254	vaudio: VAUDIO {
	255	regulator-min-microvolt = <2775000>;
	256	regulator-max-microvolt = <2775000>;
	257	regulator-enable-ramp-delay = <1000>;
	258	};
	259	};