[linux-2.6-block.git] / arch / arm / boot / dts / kirkwood-rd88f6281-a.dts

/*
 * Marvell RD88F6181 A Board descrition
 *
 * Andrew Lunn <andrew@lunn.ch>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 *
 * This file contains the definitions for the board with the A0 or
 * higher stepping of the SoC. The ethernet switch does not have a
 * "wan" port.
 */

/dts-v1/;
#include "kirkwood-rd88f6281.dtsi"

/ {
	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";

	dsa@0 {
		switch@0 {
			reg = <10 0>;	 /* MDIO address 10, switch 0 in tree */
		};
	};
};

&mdio {
	status = "okay";

	ethphy1: ethernet-phy@11 {
		 reg = <11>;
	};
};

&eth1 {
	status = "okay";

	ethernet1-port@0 {
		 phy-handle = <&ethphy1>;
	};
};
Commit	Line	Data
4f5e01e9 AL	1	/*
	2	* Marvell RD88F6181 A Board descrition
	3	*
	4	* Andrew Lunn <andrew@lunn.ch>
	5	*
	6	* This file is licensed under the terms of the GNU General Public
	7	* License version 2. This program is licensed "as is" without any
	8	* warranty of any kind, whether express or implied.
	9	*
	10	* This file contains the definitions for the board with the A0 or
	11	* higher stepping of the SoC. The ethernet switch does not have a
	12	* "wan" port.
	13	*/
	14
	15	/dts-v1/;
	16	#include "kirkwood-rd88f6281.dtsi"
	17
	18	/ {
	19	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
	20	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
	21
	22	dsa@0 {
	23	switch@0 {
	24	reg = <10 0>; /* MDIO address 10, switch 0 in tree */
	25	};
	26	};
	27	};
	28
	29	&mdio {
	30	status = "okay";
	31
	32	ethphy1: ethernet-phy@11 {
	33	reg = <11>;
	34	};
	35	};
	36
	37	&eth1 {
	38	status = "okay";
	39
	40	ethernet1-port@0 {
	41	phy-handle = <&ethphy1>;
	42	};
	43	};