[linux-2.6-block.git] / arch / arm / boot / dts / kirkwood-ns2-common.dtsi

// SPDX-License-Identifier: GPL-2.0
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"

/ {
	chosen {
		bootargs = "console=ttyS0,115200n8";
		stdout-path = &uart0;
	};

	ocp@f1000000 {
		pinctrl: pin-controller@10000 {
			pmx_ns2_sata0: pmx-ns2-sata0 {
				marvell,pins = "mpp21";
				marvell,function = "sata0";
			};
			pmx_ns2_sata1: pmx-ns2-sata1 {
				marvell,pins = "mpp20";
				marvell,function = "sata1";
			};
		};

		serial@12000 {
			status = "okay";
		};

		spi@10600 {
			status = "okay";

			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <20000000>;
				mode = <0>;

				partition@0 {
					reg = <0x0 0x80000>;
					label = "u-boot";
				};
			};
		};

		i2c@11000 {
			status = "okay";

			eeprom@50 {
				compatible = "atmel,24c04";
				pagesize = <16>;
				reg = <0x50>;
			};
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		power {
			label = "Power push button";
			linux,code = <KEY_POWER>;
			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		red-fail {
			label = "ns2:red:fail";
			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
		};
	};

	gpio_poweroff {
		compatible = "gpio-poweroff";
		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
	};

};

&mdio {
	status = "okay";

	ethphy0: ethernet-phy@X {
                /* overwrite reg property in board file */
	};
};

&eth0 {
	status = "okay";
	ethernet0-port@0 {
		phy-handle = <&ethphy0>;
	};
};
Commit	Line	Data
b2441318	1	// SPDX-License-Identifier: GPL-2.0
0ab6129c EG	2	#include "kirkwood.dtsi"
0ab6129c EG	3	#include "kirkwood-6281.dtsi"
ecee1e47 SG	4
	5	/ {
	6	chosen {
	7	bootargs = "console=ttyS0,115200n8";
ab833614	8	stdout-path = &uart0;
ecee1e47 SG	9	};
	10
	11	ocp@f1000000 {
a9483969	12	pinctrl: pin-controller@10000 {
4ea931e0 SG	13	pmx_ns2_sata0: pmx-ns2-sata0 {
	14	marvell,pins = "mpp21";
	15	marvell,function = "sata0";
	16	};
	17	pmx_ns2_sata1: pmx-ns2-sata1 {
	18	marvell,pins = "mpp20";
	19	marvell,function = "sata1";
	20	};
	21	};
	22
ecee1e47	23	serial@12000 {
ecee1e47 SG	24	status = "okay";
	25	};
	26
	27	spi@10600 {
	28	status = "okay";
	29
	30	flash@0 {
	31	#address-cells = <1>;
	32	#size-cells = <1>;
943d45aa	33	compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
ecee1e47 SG	34	reg = <0>;
	35	spi-max-frequency = <20000000>;
	36	mode = <0>;
	37
	38	partition@0 {
	39	reg = <0x0 0x80000>;
	40	label = "u-boot";
	41	};
	42	};
	43	};
	44
	45	i2c@11000 {
	46	status = "okay";
	47
	48	eeprom@50 {
0d606c08	49	compatible = "atmel,24c04";
ecee1e47 SG	50	pagesize = <16>;
	51	reg = <0x50>;
	52	};
	53	};
	54	};
	55
	56	gpio_keys {
	57	compatible = "gpio-keys";
	58	#address-cells = <1>;
	59	#size-cells = <0>;
	60
395c755f	61	power {
ecee1e47	62	label = "Power push button";
23301190	63	linux,code = <KEY_POWER>;
3a31f2d7	64	gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
ecee1e47 SG	65	};
	66	};
	67
	68	gpio-leds {
	69	compatible = "gpio-leds";
	70
	71	red-fail {
	72	label = "ns2:red:fail";
3a31f2d7	73	gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
ecee1e47 SG	74	};
ecee1e47 SG	75	};
102c9543 AL	76
	77	gpio_poweroff {
	78	compatible = "gpio-poweroff";
3a31f2d7	79	gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
102c9543 AL	80	};
102c9543 AL	81
ecee1e47	82	};
876e2333 SH	83
	84	&mdio {
	85	status = "okay";
	86
8b1750de	87	ethphy0: ethernet-phy@X {
876e2333 SH	88	/* overwrite reg property in board file */
	89	};
	90	};
	91
	92	&eth0 {
	93	status = "okay";
	94	ethernet0-port@0 {
	95	phy-handle = <&ethphy0>;
	96	};
	97	};