[linux-2.6-block.git] / arch / arm / boot / dts / kirkwood-mv88f6281gtw-ge.dts

/*
 * Marvell 88F6281 GTW GE Board
 *
 * Lennert Buytenhek <buytenh@marvell.com>
 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 *
 * This file contains the definitions that are common between the 6281
 * and 6282 variants of the Marvell Kirkwood Development Board.
 */

/dts-v1/;

#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"

/ {
	model = "Marvell 88F6281 GTW GE Board";
	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";

	memory {
		device_type = "memory";
		reg = <0x00000000 0x20000000>; /* 512 MB */
	};

	chosen {
		bootargs = "console=ttyS0,115200n8 earlyprintk";
		stdout-path = &uart0;
	};

	mbus {
		pcie-controller {
			status = "okay";

			pcie@1,0 {
				status = "okay";
			};
		};
        };

	ocp@f1000000 {
		pin-controller@10000 {
			pmx_usb_led: pmx-usb-led {
				marvell,pins = "mpp12";
				marvell,function = "gpo";
			};

			pmx_leds: pmx-leds {
				marvell,pins = "mpp20", "mpp21";
				marvell,function = "gpio";
			};

			pmx_keys: pmx-keys {
				marvell,pins = "mpp46", "mpp47";
				marvell,function = "gpio";
			};
		};

		spi@10600 {
			status = "okay";

			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "mxicy,mx25l12805d";
				reg = <0>;
				spi-max-frequency = <50000000>;
				mode = <0>;
			};
		};

		serial@12000 {
			status = "okay";
		};

		ehci@50000 {
			status = "okay";
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
		pinctrl-names = "default";

		green-status {
			label = "gtw:green:Status";
			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
		};

		red-status {
			label = "gtw:red:Status";
			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
		};

		green-usb {
			label = "gtw:green:USB";
			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&pmx_keys>;
		pinctrl-names = "default";

		button@1 {
			label = "SWR Button";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
		};
		button@2 {
			label = "WPS Button";
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
		};
	};

	dsa@0 {
		compatible = "marvell,dsa";
		#address-cells = <2>;
		#size-cells = <0>;

		dsa,ethernet = <&eth0>;
		dsa,mii-bus = <&ethphy0>;

		switch@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */

			port@0 {
				reg = <0>;
				label = "lan1";
			};

			port@1 {
				reg = <1>;
				label = "lan2";
			};

			port@2 {
				reg = <2>;
				label = "lan3";
			};

			port@3 {
				reg = <3>;
				label = "lan4";
			};

			port@4 {
				reg = <4>;
				label = "wan";
			};

			port@5 {
				reg = <5>;
				label = "cpu";
			};
		};
	};
};

&mdio {
	status = "okay";

	ethphy0: ethernet-phy@ff {
		reg = <0xff>; 	/* No phy attached */
		speed = <1000>;
		duplex = <1>;
	};
};

&eth0 {
	status = "okay";
	ethernet0-port@0 {
		phy-handle = <&ethphy0>;
	};
};
Commit	Line	Data
37ae08c9 TP	1	/*
	2	* Marvell 88F6281 GTW GE Board
	3	*
	4	* Lennert Buytenhek <buytenh@marvell.com>
	5	* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
	6	*
	7	* This file is licensed under the terms of the GNU General Public
	8	* License version 2. This program is licensed "as is" without any
	9	* warranty of any kind, whether express or implied.
	10	*
	11	* This file contains the definitions that are common between the 6281
	12	* and 6282 variants of the Marvell Kirkwood Development Board.
	13	*/
	14
	15	/dts-v1/;
	16
ea489af0 JC	17	#include "kirkwood.dtsi"
ea489af0 JC	18	#include "kirkwood-6281.dtsi"
37ae08c9 TP	19
	20	/ {
	21	model = "Marvell 88F6281 GTW GE Board";
	22	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
	23
	24	memory {
	25	device_type = "memory";
	26	reg = <0x00000000 0x20000000>; /* 512 MB */
	27	};
	28
	29	chosen {
	30	bootargs = "console=ttyS0,115200n8 earlyprintk";
ab833614	31	stdout-path = &uart0;
37ae08c9 TP	32	};
37ae08c9 TP	33
788296b2 SH	34	mbus {
	35	pcie-controller {
	36	status = "okay";
	37
	38	pcie@1,0 {
	39	status = "okay";
	40	};
	41	};
	42	};
	43
37ae08c9	44	ocp@f1000000 {
a9483969	45	pin-controller@10000 {
37ae08c9 TP	46	pmx_usb_led: pmx-usb-led {
	47	marvell,pins = "mpp12";
	48	marvell,function = "gpo";
	49	};
	50
	51	pmx_leds: pmx-leds {
	52	marvell,pins = "mpp20", "mpp21";
	53	marvell,function = "gpio";
	54	};
	55
	56	pmx_keys: pmx-keys {
	57	marvell,pins = "mpp46", "mpp47";
	58	marvell,function = "gpio";
	59	};
	60	};
	61
	62	spi@10600 {
37ae08c9 TP	63	status = "okay";
	64
	65	flash@0 {
	66	#address-cells = <1>;
	67	#size-cells = <1>;
dcdf9cfc	68	compatible = "mxicy,mx25l12805d";
37ae08c9 TP	69	reg = <0>;
	70	spi-max-frequency = <50000000>;
	71	mode = <0>;
	72	};
	73	};
	74
	75	serial@12000 {
9f2339a6	76	status = "okay";
37ae08c9 TP	77	};
	78
	79	ehci@50000 {
	80	status = "okay";
	81	};
37ae08c9 TP	82	};
	83
	84	gpio-leds {
	85	compatible = "gpio-leds";
	86	pinctrl-0 = <&pmx_leds &pmx_usb_led>;
	87	pinctrl-names = "default";
	88
	89	green-status {
	90	label = "gtw:green:Status";
3a31f2d7	91	gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
37ae08c9 TP	92	};
	93
	94	red-status {
	95	label = "gtw:red:Status";
3a31f2d7	96	gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
37ae08c9 TP	97	};
	98
	99	green-usb {
	100	label = "gtw:green:USB";
3a31f2d7	101	gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
37ae08c9 TP	102	};
	103	};
	104
	105	gpio_keys {
	106	compatible = "gpio-keys";
	107	#address-cells = <1>;
	108	#size-cells = <0>;
	109	pinctrl-0 = <&pmx_keys>;
	110	pinctrl-names = "default";
	111
	112	button@1 {
	113	label = "SWR Button";
23301190	114	linux,code = <KEY_RESTART>;
3a31f2d7	115	gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
37ae08c9 TP	116	};
	117	button@2 {
	118	label = "WPS Button";
23301190	119	linux,code = <KEY_WPS_BUTTON>;
3a31f2d7	120	gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
37ae08c9 TP	121	};
37ae08c9 TP	122	};
e7c8f380 AL	123
	124	dsa@0 {
	125	compatible = "marvell,dsa";
	126	#address-cells = <2>;
	127	#size-cells = <0>;
	128
	129	dsa,ethernet = <&eth0>;
	130	dsa,mii-bus = <&ethphy0>;
	131
	132	switch@0 {
	133	#address-cells = <1>;
	134	#size-cells = <0>;
	135	reg = <0 0>; /* MDIO address 0, switch 0 in tree */
	136
	137	port@0 {
	138	reg = <0>;
	139	label = "lan1";
	140	};
	141
	142	port@1 {
	143	reg = <1>;
	144	label = "lan2";
	145	};
	146
	147	port@2 {
	148	reg = <2>;
	149	label = "lan3";
	150	};
	151
	152	port@3 {
	153	reg = <3>;
	154	label = "lan4";
	155	};
	156
	157	port@4 {
	158	reg = <4>;
	159	label = "wan";
	160	};
	161
	162	port@5 {
	163	reg = <5>;
	164	label = "cpu";
	165	};
	166	};
	167	};
	168	};
	169
	170	&mdio {
	171	status = "okay";
	172
	173	ethphy0: ethernet-phy@ff {
	174	reg = <0xff>; /* No phy attached */
	175	speed = <1000>;
	176	duplex = <1>;
	177	};
	178	};
	179
	180	&eth0 {
	181	status = "okay";
	182	ethernet0-port@0 {
	183	phy-handle = <&ethphy0>;
	184	};
37ae08c9	185	};