[linux-2.6-block.git] / arch / arm / boot / dts / kirkwood-linkstation-lswvl.dts

/*
 * Device Tree file for Buffalo Linkstation LS-WVL
 *
 * Copyright (C) 2015, 2016
 * Roger Shimizu <rogershimizu@gmail.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "kirkwood-linkstation-6282.dtsi"

/ {
	model = "Buffalo Linkstation LS-WVL";
	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";

	memory { /* 256 MB */
		device_type = "memory";
		reg = <0x00000000 0x10000000>;
	};

	ocp@f1000000 {
		pinctrl: pin-controller@10000 {
			pmx_power_hdd1: pmx-power-hdd1 {
				marvell,pins = "mpp9";
				marvell,function = "gpio";
			};
			pmx_led_hdderr0: pmx-led-hdderr0 {
				marvell,pins = "mpp34";
				marvell,function = "gpio";
			};
			pmx_led_hdderr1: pmx-led-hdderr1 {
				marvell,pins = "mpp35";
				marvell,function = "gpio";
			};
		};

		sata@80000 {
			nr-ports = <2>;
		};
	};

	gpio_leds {
		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
			     &pmx_led_info &pmx_led_power
			     &pmx_led_function_blue
			     &pmx_led_hdderr0
			     &pmx_led_hdderr1>;

		red-hdderr0-led {
			label = "linkstation:red:hdderr0";
			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
		};

		red-hdderr1-led {
			label = "linkstation:red:hdderr1";
			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
		};
	};

	regulators {
		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;

		hdd_power1: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "HDD1 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
		};
	};
};
Commit	Line	Data
60ff189c RS	1	/*
	2	* Device Tree file for Buffalo Linkstation LS-WVL
	3	*
	4	* Copyright (C) 2015, 2016
	5	* Roger Shimizu <rogershimizu@gmail.com>
	6	*
	7	* This file is dual-licensed: you can use it either under the terms
	8	* of the GPL or the X11 license, at your option. Note that this dual
	9	* licensing only applies to this file, and not this project as a
	10	* whole.
	11	*
	12	* a) This file is free software; you can redistribute it and/or
	13	* modify it under the terms of the GNU General Public License as
	14	* published by the Free Software Foundation; either version 2 of the
	15	* License, or (at your option) any later version.
	16	*
24f0b6fe	17	* This file is distributed in the hope that it will be useful,
60ff189c RS	18	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	19	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	20	* GNU General Public License for more details.
	21	*
24f0b6fe	22	* Or, alternatively,
60ff189c RS	23	*
	24	* b) Permission is hereby granted, free of charge, to any person
	25	* obtaining a copy of this software and associated documentation
	26	* files (the "Software"), to deal in the Software without
24f0b6fe	27	* restriction, including without limitation the rights to use,
60ff189c RS	28	* copy, modify, merge, publish, distribute, sublicense, and/or
	29	* sell copies of the Software, and to permit persons to whom the
	30	* Software is furnished to do so, subject to the following
	31	* conditions:
	32	*
	33	* The above copyright notice and this permission notice shall be
	34	* included in all copies or substantial portions of the Software.
	35	*
24f0b6fe	36	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
60ff189c RS	37	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	38	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	39	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
24f0b6fe	40	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
60ff189c RS	41	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	42	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	43	* OTHER DEALINGS IN THE SOFTWARE.
	44	*/
	45
	46	/dts-v1/;
	47	#include "kirkwood-linkstation-6282.dtsi"
	48
	49	/ {
	50	model = "Buffalo Linkstation LS-WVL";
	51	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
	52
	53	memory { /* 256 MB */
	54	device_type = "memory";
	55	reg = <0x00000000 0x10000000>;
	56	};
	57
	58	ocp@f1000000 {
	59	pinctrl: pin-controller@10000 {
	60	pmx_power_hdd1: pmx-power-hdd1 {
	61	marvell,pins = "mpp9";
	62	marvell,function = "gpio";
	63	};
	64	pmx_led_hdderr0: pmx-led-hdderr0 {
	65	marvell,pins = "mpp34";
	66	marvell,function = "gpio";
	67	};
	68	pmx_led_hdderr1: pmx-led-hdderr1 {
	69	marvell,pins = "mpp35";
	70	marvell,function = "gpio";
	71	};
	72	};
	73
	74	sata@80000 {
	75	nr-ports = <2>;
	76	};
	77	};
	78
	79	gpio_leds {
	80	pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
	81	&pmx_led_info &pmx_led_power
	82	&pmx_led_function_blue
	83	&pmx_led_hdderr0
	84	&pmx_led_hdderr1>;
	85
	86	red-hdderr0-led {
	87	label = "linkstation:red:hdderr0";
	88	gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	89	};
	90
	91	red-hdderr1-led {
	92	label = "linkstation:red:hdderr1";
	93	gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	94	};
	95	};
	96
	97	regulators {
	98	pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
	99
	100	hdd_power1: regulator@3 {
	101	compatible = "regulator-fixed";
	102	reg = <3>;
	103	regulator-name = "HDD1 Power";
	104	regulator-min-microvolt = <5000000>;
105	regulator-max-microvolt = <5000000>;
106	enable-active-high;
107	regulator-always-on;
108	regulator-boot-on;
109	gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
110	};
111	};
112	};