[linux-block.git] / arch / arm / boot / dts / kirkwood-cloudbox.dts

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;

#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"

/ {
	model = "LaCie CloudBox";
	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";

	memory {
		device_type = "memory";
		reg = <0x00000000 0x10000000>;
	};

	chosen {
		bootargs = "console=ttyS0,115200n8";
		stdout-path = &uart0;
	};

	ocp@f1000000 {
		pinctrl: pin-controller@10000 {
			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
				marvell,pins = "mpp15";
				marvell,function = "sata0";
			};
		};

		serial@12000 {
			status = "okay";
		};

		sata@80000 {
			pinctrl-0 = <&pmx_cloudbox_sata0>;
			pinctrl-names = "default";
			status = "okay";
			nr-ports = <1>;
		};

		spi@10600 {
			status = "okay";

			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <20000000>;
				mode = <0>;

				partition@0 {
					reg = <0x0 0x80000>;
					label = "u-boot";
				};
			};
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		power {
			label = "Power push button";
			linux,code = <KEY_POWER>;
			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		red-fail {
			label = "cloudbox:red:fail";
			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
		};
		blue-sata {
			label = "cloudbox:blue:sata";
			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
		};
	};

	gpio_poweroff {
		compatible = "gpio-poweroff";
		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	};
};

&mdio {
	status = "okay";

	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&eth0 {
	status = "okay";
	ethernet0-port@0 {
		phy-handle = <&ethphy0>;
	};
};
Commit	Line	Data
b2441318	1	// SPDX-License-Identifier: GPL-2.0
98d4f2ac SG	2	/dts-v1/;
98d4f2ac SG	3
0ab6129c EG	4	#include "kirkwood.dtsi"
0ab6129c EG	5	#include "kirkwood-6281.dtsi"
98d4f2ac SG	6
	7	/ {
	8	model = "LaCie CloudBox";
	9	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
	10
	11	memory {
	12	device_type = "memory";
	13	reg = <0x00000000 0x10000000>;
	14	};
	15
	16	chosen {
	17	bootargs = "console=ttyS0,115200n8";
ab833614	18	stdout-path = &uart0;
98d4f2ac SG	19	};
	20
	21	ocp@f1000000 {
a9483969	22	pinctrl: pin-controller@10000 {
98d4f2ac SG	23	pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
	24	marvell,pins = "mpp15";
	25	marvell,function = "sata0";
	26	};
	27	};
	28
	29	serial@12000 {
98d4f2ac SG	30	status = "okay";
	31	};
	32
	33	sata@80000 {
2dd432e4 TP	34	pinctrl-0 = <&pmx_cloudbox_sata0>;
2dd432e4 TP	35	pinctrl-names = "default";
98d4f2ac SG	36	status = "okay";
	37	nr-ports = <1>;
	38	};
	39
	40	spi@10600 {
	41	status = "okay";
	42
	43	flash@0 {
	44	#address-cells = <1>;
	45	#size-cells = <1>;
943d45aa	46	compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
98d4f2ac SG	47	reg = <0>;
	48	spi-max-frequency = <20000000>;
	49	mode = <0>;
	50
	51	partition@0 {
	52	reg = <0x0 0x80000>;
	53	label = "u-boot";
	54	};
	55	};
	56	};
	57	};
	58
	59	gpio_keys {
	60	compatible = "gpio-keys";
	61	#address-cells = <1>;
	62	#size-cells = <0>;
	63
395c755f	64	power {
98d4f2ac	65	label = "Power push button";
23301190	66	linux,code = <KEY_POWER>;
3a31f2d7	67	gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
98d4f2ac SG	68	};
	69	};
	70
	71	gpio-leds {
	72	compatible = "gpio-leds";
	73
	74	red-fail {
	75	label = "cloudbox:red:fail";
3a31f2d7	76	gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
98d4f2ac SG	77	};
	78	blue-sata {
	79	label = "cloudbox:blue:sata";
3a31f2d7	80	gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
98d4f2ac SG	81	};
	82	};
	83
	84	gpio_poweroff {
	85	compatible = "gpio-poweroff";
3a31f2d7	86	gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
98d4f2ac SG	87	};
98d4f2ac SG	88	};
876e2333 SH	89
	90	&mdio {
	91	status = "okay";
	92
	93	ethphy0: ethernet-phy@0 {
876e2333 SH	94	reg = <0>;
	95	};
	96	};
	97
	98	&eth0 {
	99	status = "okay";
	100	ethernet0-port@0 {
	101	phy-handle = <&ethphy0>;
	102	};
	103	};