Commit | Line | Data |
---|---|---|
051124e5 MV |
1 | /* |
2 | * Copyright (C) 2013 Marek Vasut <marex@denx.de> | |
3 | * | |
4 | * The code contained herein is licensed under the GNU General Public | |
5 | * License. You may obtain a copy of the GNU General Public License | |
6 | * Version 2 or later at the following locations: | |
7 | * | |
8 | * http://www.opensource.org/licenses/gpl-license.html | |
9 | * http://www.gnu.org/copyleft/gpl.html | |
10 | */ | |
11 | ||
12 | /dts-v1/; | |
13 | #include "imx53.dtsi" | |
14 | ||
15 | / { | |
16 | model = "DENX M53EVK"; | |
17 | compatible = "denx,imx53-m53evk", "fsl,imx53"; | |
18 | ||
19 | memory { | |
20 | reg = <0x70000000 0x20000000>; | |
21 | }; | |
22 | ||
23 | soc { | |
24 | display@di1 { | |
25 | compatible = "fsl,imx-parallel-display"; | |
26 | crtcs = <&ipu 1>; | |
27 | interface-pix-fmt = "bgr666"; | |
28 | pinctrl-names = "default"; | |
29 | pinctrl-0 = <&pinctrl_ipu_disp2_1>; | |
30 | ||
31 | display-timings { | |
32 | 800x480p60 { | |
33 | native-mode; | |
34 | clock-frequency = <31500000>; | |
35 | hactive = <800>; | |
36 | vactive = <480>; | |
37 | hfront-porch = <40>; | |
38 | hback-porch = <88>; | |
39 | hsync-len = <128>; | |
40 | vback-porch = <33>; | |
41 | vfront-porch = <9>; | |
42 | vsync-len = <3>; | |
43 | vsync-active = <1>; | |
44 | }; | |
45 | }; | |
46 | }; | |
47 | }; | |
48 | ||
49 | backlight { | |
50 | compatible = "pwm-backlight"; | |
51 | pwms = <&pwm1 0 3000>; | |
52 | brightness-levels = <0 4 8 16 32 64 128 255>; | |
53 | default-brightness-level = <6>; | |
54 | }; | |
55 | ||
56 | leds { | |
57 | compatible = "gpio-leds"; | |
58 | pinctrl-names = "default"; | |
59 | pinctrl-0 = <&led_pin_gpio>; | |
60 | ||
61 | user1 { | |
62 | label = "user1"; | |
63 | gpios = <&gpio2 8 0>; | |
64 | linux,default-trigger = "heartbeat"; | |
65 | }; | |
66 | ||
67 | user2 { | |
68 | label = "user2"; | |
69 | gpios = <&gpio2 9 0>; | |
70 | linux,default-trigger = "heartbeat"; | |
71 | }; | |
72 | }; | |
73 | ||
74 | regulators { | |
75 | compatible = "simple-bus"; | |
76 | ||
77 | reg_3p2v: 3p2v { | |
78 | compatible = "regulator-fixed"; | |
79 | regulator-name = "3P2V"; | |
80 | regulator-min-microvolt = <3200000>; | |
81 | regulator-max-microvolt = <3200000>; | |
82 | regulator-always-on; | |
83 | }; | |
84 | }; | |
85 | ||
86 | sound { | |
87 | compatible = "fsl,imx53-m53evk-sgtl5000", | |
88 | "fsl,imx-audio-sgtl5000"; | |
89 | model = "imx53-m53evk-sgtl5000"; | |
90 | ssi-controller = <&ssi2>; | |
91 | audio-codec = <&sgtl5000>; | |
92 | audio-routing = | |
93 | "MIC_IN", "Mic Jack", | |
94 | "Mic Jack", "Mic Bias", | |
95 | "LINE_IN", "Line In Jack", | |
96 | "Headphone Jack", "HP_OUT", | |
97 | "Ext Spk", "LINE_OUT"; | |
98 | mux-int-port = <2>; | |
99 | mux-ext-port = <4>; | |
100 | }; | |
101 | }; | |
102 | ||
103 | &audmux { | |
104 | pinctrl-names = "default"; | |
105 | pinctrl-0 = <&pinctrl_audmux_2>; | |
106 | status = "okay"; | |
107 | }; | |
108 | ||
109 | &can1 { | |
110 | pinctrl-names = "default"; | |
111 | pinctrl-0 = <&pinctrl_can1_3>; | |
112 | status = "okay"; | |
113 | }; | |
114 | ||
115 | &can2 { | |
116 | pinctrl-names = "default"; | |
117 | pinctrl-0 = <&pinctrl_can2_1>; | |
118 | status = "okay"; | |
119 | }; | |
120 | ||
121 | &esdhc1 { | |
122 | pinctrl-names = "default"; | |
123 | pinctrl-0 = <&pinctrl_esdhc1_1>; | |
124 | cd-gpios = <&gpio1 1 0>; | |
125 | wp-gpios = <&gpio1 9 0>; | |
126 | status = "okay"; | |
127 | }; | |
128 | ||
129 | &fec { | |
130 | pinctrl-names = "default"; | |
131 | pinctrl-0 = <&pinctrl_fec_1>; | |
132 | phy-mode = "rmii"; | |
133 | status = "okay"; | |
134 | }; | |
135 | ||
136 | &i2c1 { | |
137 | pinctrl-names = "default"; | |
138 | pinctrl-0 = <&pinctrl_i2c1_2>; | |
139 | status = "okay"; | |
140 | ||
141 | sgtl5000: codec@0a { | |
142 | compatible = "fsl,sgtl5000"; | |
143 | reg = <0x0a>; | |
144 | VDDA-supply = <®_3p2v>; | |
145 | VDDIO-supply = <®_3p2v>; | |
146 | clocks = <&clks 150>; | |
147 | }; | |
148 | }; | |
149 | ||
150 | &i2c2 { | |
151 | pinctrl-names = "default"; | |
152 | pinctrl-0 = <&pinctrl_i2c2_2>; | |
153 | clock-frequency = <400000>; | |
154 | status = "okay"; | |
155 | ||
156 | stmpe610@41 { | |
157 | compatible = "st,stmpe610"; | |
158 | #address-cells = <1>; | |
159 | #size-cells = <0>; | |
160 | reg = <0x41>; | |
161 | id = <0>; | |
162 | blocks = <0x5>; | |
163 | interrupts = <6 0x0>; | |
164 | interrupt-parent = <&gpio7>; | |
165 | irq-trigger = <0x1>; | |
166 | ||
167 | stmpe_touchscreen { | |
168 | compatible = "stmpe,ts"; | |
169 | reg = <0>; | |
170 | ts,sample-time = <4>; | |
171 | ts,mod-12b = <1>; | |
172 | ts,ref-sel = <0>; | |
173 | ts,adc-freq = <1>; | |
174 | ts,ave-ctrl = <3>; | |
175 | ts,touch-det-delay = <3>; | |
176 | ts,settling = <4>; | |
177 | ts,fraction-z = <7>; | |
178 | ts,i-drive = <1>; | |
179 | }; | |
180 | }; | |
181 | ||
182 | eeprom: eeprom@50 { | |
183 | compatible = "atmel,24c128"; | |
184 | reg = <0x50>; | |
185 | pagesize = <32>; | |
186 | }; | |
187 | ||
188 | rtc: rtc@68 { | |
189 | compatible = "stm,m41t62"; | |
190 | reg = <0x68>; | |
191 | }; | |
192 | }; | |
193 | ||
194 | &i2c3 { | |
195 | pinctrl-names = "default"; | |
196 | pinctrl-0 = <&pinctrl_i2c3_1>; | |
197 | status = "okay"; | |
198 | }; | |
199 | ||
200 | &iomuxc { | |
201 | pinctrl-names = "default"; | |
202 | pinctrl-0 = <&pinctrl_hog>; | |
203 | ||
204 | hog { | |
205 | pinctrl_hog: hoggrp { | |
206 | fsl,pins = < | |
207 | MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 | |
208 | MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 | |
209 | MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 | |
210 | MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 | |
211 | ||
212 | >; | |
213 | }; | |
214 | ||
215 | led_pin_gpio: led_gpio@0 { | |
216 | fsl,pins = < | |
217 | MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 | |
218 | MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 | |
219 | >; | |
220 | }; | |
221 | }; | |
222 | }; | |
223 | ||
224 | &nfc { | |
225 | pinctrl-names = "default"; | |
226 | pinctrl-0 = <&pinctrl_nand_1>; | |
227 | nand-bus-width = <8>; | |
228 | nand-ecc-mode = "hw"; | |
229 | status = "okay"; | |
230 | }; | |
231 | ||
232 | &pwm1 { | |
233 | pinctrl-names = "default"; | |
234 | pinctrl-0 = <&pinctrl_pwm1_1>; | |
235 | status = "okay"; | |
236 | }; | |
237 | ||
238 | &ssi2 { | |
239 | fsl,mode = "i2s-slave"; | |
240 | status = "okay"; | |
241 | }; | |
242 | ||
243 | &uart1 { | |
244 | pinctrl-names = "default"; | |
245 | pinctrl-0 = <&pinctrl_uart1_2>; | |
246 | status = "okay"; | |
247 | }; | |
248 | ||
249 | &uart2 { | |
250 | pinctrl-names = "default"; | |
251 | pinctrl-0 = <&pinctrl_uart2_1>; | |
252 | status = "okay"; | |
253 | }; | |
254 | ||
255 | &uart3 { | |
256 | pinctrl-names = "default"; | |
257 | pinctrl-0 = <&pinctrl_uart3_1>; | |
258 | status = "okay"; | |
259 | }; |