Commit | Line | Data |
---|---|---|
15dfdfad TF |
1 | /* |
2 | * Samsung's Exynos4412 based Trats 2 board device tree source | |
3 | * | |
4 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Trats 2 board which is based on | |
8 | * Samsung's Exynos4412 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
16 | #include "exynos4412.dtsi" | |
7eec1266 | 17 | #include <dt-bindings/gpio/gpio.h> |
15dfdfad TF |
18 | |
19 | / { | |
20 | model = "Samsung Trats 2 based on Exynos4412"; | |
8bdb31b4 | 21 | compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; |
15dfdfad | 22 | |
9f1eaef2 | 23 | aliases { |
6af2ba90 | 24 | i2c9 = &i2c_ak8975; |
85cb4e0b | 25 | i2c10 = &i2c_cm36651; |
7eec1266 | 26 | i2c11 = &i2c_max77693; |
9f1eaef2 JA |
27 | }; |
28 | ||
15dfdfad TF |
29 | memory { |
30 | reg = <0x40000000 0x40000000>; | |
31 | }; | |
32 | ||
33 | chosen { | |
34 | bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; | |
35 | }; | |
36 | ||
37 | firmware@0204F000 { | |
38 | compatible = "samsung,secure-firmware"; | |
39 | reg = <0x0204F000 0x1000>; | |
40 | }; | |
41 | ||
42 | fixed-rate-clocks { | |
43 | xxti { | |
44 | compatible = "samsung,clock-xxti", "fixed-clock"; | |
45 | clock-frequency = <0>; | |
46 | }; | |
47 | ||
48 | xusbxti { | |
49 | compatible = "samsung,clock-xusbxti", "fixed-clock"; | |
50 | clock-frequency = <24000000>; | |
51 | }; | |
52 | }; | |
53 | ||
54 | regulators { | |
55 | compatible = "simple-bus"; | |
56 | #address-cells = <1>; | |
57 | #size-cells = <0>; | |
58 | ||
59 | vemmc_reg: regulator-0 { | |
60 | compatible = "regulator-fixed"; | |
61 | regulator-name = "VMEM_VDD_2.8V"; | |
62 | regulator-min-microvolt = <2800000>; | |
63 | regulator-max-microvolt = <2800000>; | |
64 | gpio = <&gpk0 2 0>; | |
65 | enable-active-high; | |
66 | }; | |
67 | ||
b4fec647 SN |
68 | cam_io_reg: voltage-regulator-1 { |
69 | compatible = "regulator-fixed"; | |
70 | regulator-name = "CAM_SENSOR_A"; | |
71 | regulator-min-microvolt = <2800000>; | |
72 | regulator-max-microvolt = <2800000>; | |
73 | gpio = <&gpm0 2 0>; | |
74 | enable-active-high; | |
75 | }; | |
76 | ||
420ae845 AH |
77 | lcd_vdd3_reg: voltage-regulator-2 { |
78 | compatible = "regulator-fixed"; | |
79 | regulator-name = "LCD_VDD_2.2V"; | |
80 | regulator-min-microvolt = <2200000>; | |
81 | regulator-max-microvolt = <2200000>; | |
82 | gpio = <&gpc0 1 0>; | |
83 | enable-active-high; | |
84 | }; | |
85 | ||
4cb37864 SN |
86 | cam_af_reg: voltage-regulator-3 { |
87 | compatible = "regulator-fixed"; | |
88 | regulator-name = "CAM_AF"; | |
89 | regulator-min-microvolt = <2800000>; | |
90 | regulator-max-microvolt = <2800000>; | |
91 | gpio = <&gpm0 4 0>; | |
92 | enable-active-high; | |
93 | }; | |
94 | ||
95 | cam_isp_core_reg: voltage-regulator-4 { | |
96 | compatible = "regulator-fixed"; | |
97 | regulator-name = "CAM_ISP_CORE_1.2V_EN"; | |
98 | regulator-min-microvolt = <1200000>; | |
99 | regulator-max-microvolt = <1200000>; | |
100 | gpio = <&gpm0 3 0>; | |
101 | enable-active-high; | |
102 | regulator-always-on; | |
103 | }; | |
85cb4e0b BS |
104 | |
105 | ps_als_reg: voltage-regulator-5 { | |
106 | compatible = "regulator-fixed"; | |
107 | regulator-name = "LED_A_3.0V"; | |
108 | regulator-min-microvolt = <3000000>; | |
109 | regulator-max-microvolt = <3000000>; | |
110 | gpio = <&gpj0 5 0>; | |
111 | enable-active-high; | |
112 | }; | |
15dfdfad TF |
113 | }; |
114 | ||
115 | gpio-keys { | |
116 | compatible = "gpio-keys"; | |
117 | ||
118 | key-down { | |
172ff6c6 | 119 | gpios = <&gpx3 3 1>; |
15dfdfad TF |
120 | linux,code = <114>; |
121 | label = "volume down"; | |
122 | debounce-interval = <10>; | |
123 | }; | |
124 | ||
125 | key-up { | |
172ff6c6 | 126 | gpios = <&gpx2 2 1>; |
15dfdfad TF |
127 | linux,code = <115>; |
128 | label = "volume up"; | |
129 | debounce-interval = <10>; | |
130 | }; | |
131 | ||
132 | key-power { | |
15dfdfad TF |
133 | gpios = <&gpx2 7 1>; |
134 | linux,code = <116>; | |
135 | label = "power"; | |
136 | debounce-interval = <10>; | |
137 | gpio-key,wakeup; | |
138 | }; | |
172ff6c6 BS |
139 | |
140 | key-ok { | |
141 | gpios = <&gpx0 1 1>; | |
142 | linux,code = <139>; | |
143 | label = "ok"; | |
144 | debounce-inteval = <10>; | |
145 | gpio-key,wakeup; | |
146 | }; | |
15dfdfad TF |
147 | }; |
148 | ||
4f423788 CC |
149 | adc: adc@126C0000 { |
150 | vdd-supply = <&ldo3_reg>; | |
151 | status = "okay"; | |
152 | }; | |
153 | ||
15dfdfad TF |
154 | i2c@13890000 { |
155 | samsung,i2c-sda-delay = <100>; | |
156 | samsung,i2c-slave-addr = <0x10>; | |
157 | samsung,i2c-max-bus-freq = <400000>; | |
158 | pinctrl-0 = <&i2c3_bus>; | |
159 | pinctrl-names = "default"; | |
160 | status = "okay"; | |
161 | ||
162 | mms114-touchscreen@48 { | |
163 | compatible = "melfas,mms114"; | |
164 | reg = <0x48>; | |
165 | interrupt-parent = <&gpm2>; | |
166 | interrupts = <3 2>; | |
167 | x-size = <720>; | |
168 | y-size = <1280>; | |
169 | avdd-supply = <&ldo23_reg>; | |
170 | vdd-supply = <&ldo24_reg>; | |
171 | }; | |
172 | }; | |
173 | ||
4cb37864 SN |
174 | i2c_0: i2c@13860000 { |
175 | samsung,i2c-sda-delay = <100>; | |
176 | samsung,i2c-slave-addr = <0x10>; | |
177 | samsung,i2c-max-bus-freq = <400000>; | |
178 | pinctrl-0 = <&i2c0_bus>; | |
179 | pinctrl-names = "default"; | |
180 | status = "okay"; | |
181 | ||
182 | s5c73m3@3c { | |
183 | compatible = "samsung,s5c73m3"; | |
184 | reg = <0x3c>; | |
185 | standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ | |
186 | xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ | |
187 | vdd-int-supply = <&buck9_reg>; | |
188 | vddio-cis-supply = <&ldo9_reg>; | |
189 | vdda-supply = <&ldo17_reg>; | |
190 | vddio-host-supply = <&ldo18_reg>; | |
191 | vdd-af-supply = <&cam_af_reg>; | |
192 | vdd-reg-supply = <&cam_io_reg>; | |
193 | clock-frequency = <24000000>; | |
194 | /* CAM_A_CLKOUT */ | |
195 | clocks = <&camera 0>; | |
196 | clock-names = "cis_extclk"; | |
197 | port { | |
198 | s5c73m3_ep: endpoint { | |
199 | remote-endpoint = <&csis0_ep>; | |
200 | data-lanes = <1 2 3 4>; | |
201 | }; | |
202 | }; | |
203 | }; | |
204 | }; | |
205 | ||
15dfdfad TF |
206 | i2c@138D0000 { |
207 | samsung,i2c-sda-delay = <100>; | |
208 | samsung,i2c-slave-addr = <0x10>; | |
209 | samsung,i2c-max-bus-freq = <100000>; | |
210 | pinctrl-0 = <&i2c7_bus>; | |
211 | pinctrl-names = "default"; | |
212 | status = "okay"; | |
213 | ||
214 | max77686_pmic@09 { | |
215 | compatible = "maxim,max77686"; | |
216 | interrupt-parent = <&gpx0>; | |
217 | interrupts = <7 0>; | |
218 | reg = <0x09>; | |
ada12c47 | 219 | #clock-cells = <1>; |
15dfdfad TF |
220 | |
221 | voltage-regulators { | |
222 | ldo1_reg: ldo1 { | |
223 | regulator-compatible = "LDO1"; | |
224 | regulator-name = "VALIVE_1.0V_AP"; | |
225 | regulator-min-microvolt = <1000000>; | |
226 | regulator-max-microvolt = <1000000>; | |
227 | regulator-always-on; | |
228 | regulator-mem-on; | |
229 | }; | |
230 | ||
231 | ldo2_reg: ldo2 { | |
232 | regulator-compatible = "LDO2"; | |
233 | regulator-name = "VM1M2_1.2V_AP"; | |
234 | regulator-min-microvolt = <1200000>; | |
235 | regulator-max-microvolt = <1200000>; | |
236 | regulator-always-on; | |
237 | regulator-mem-on; | |
238 | }; | |
239 | ||
240 | ldo3_reg: ldo3 { | |
241 | regulator-compatible = "LDO3"; | |
242 | regulator-name = "VCC_1.8V_AP"; | |
243 | regulator-min-microvolt = <1800000>; | |
244 | regulator-max-microvolt = <1800000>; | |
245 | regulator-always-on; | |
246 | regulator-mem-on; | |
247 | }; | |
248 | ||
249 | ldo4_reg: ldo4 { | |
250 | regulator-compatible = "LDO4"; | |
251 | regulator-name = "VCC_2.8V_AP"; | |
252 | regulator-min-microvolt = <2800000>; | |
253 | regulator-max-microvolt = <2800000>; | |
254 | regulator-always-on; | |
255 | regulator-mem-on; | |
256 | }; | |
257 | ||
258 | ldo5_reg: ldo5 { | |
259 | regulator-compatible = "LDO5"; | |
260 | regulator-name = "VCC_1.8V_IO"; | |
261 | regulator-min-microvolt = <1800000>; | |
262 | regulator-max-microvolt = <1800000>; | |
263 | regulator-always-on; | |
264 | regulator-mem-on; | |
265 | }; | |
266 | ||
267 | ldo6_reg: ldo6 { | |
268 | regulator-compatible = "LDO6"; | |
269 | regulator-name = "VMPLL_1.0V_AP"; | |
270 | regulator-min-microvolt = <1000000>; | |
271 | regulator-max-microvolt = <1000000>; | |
272 | regulator-always-on; | |
273 | regulator-mem-on; | |
274 | }; | |
275 | ||
276 | ldo7_reg: ldo7 { | |
277 | regulator-compatible = "LDO7"; | |
278 | regulator-name = "VPLL_1.0V_AP"; | |
279 | regulator-min-microvolt = <1000000>; | |
280 | regulator-max-microvolt = <1000000>; | |
281 | regulator-always-on; | |
282 | regulator-mem-on; | |
283 | }; | |
284 | ||
285 | ldo8_reg: ldo8 { | |
286 | regulator-compatible = "LDO8"; | |
287 | regulator-name = "VMIPI_1.0V"; | |
288 | regulator-min-microvolt = <1000000>; | |
289 | regulator-max-microvolt = <1000000>; | |
290 | regulator-mem-off; | |
291 | }; | |
292 | ||
293 | ldo9_reg: ldo9 { | |
294 | regulator-compatible = "LDO9"; | |
295 | regulator-name = "CAM_ISP_MIPI_1.2V"; | |
296 | regulator-min-microvolt = <1200000>; | |
297 | regulator-max-microvolt = <1200000>; | |
298 | regulator-mem-idle; | |
299 | }; | |
300 | ||
301 | ldo10_reg: ldo10 { | |
302 | regulator-compatible = "LDO10"; | |
303 | regulator-name = "VMIPI_1.8V"; | |
304 | regulator-min-microvolt = <1800000>; | |
305 | regulator-max-microvolt = <1800000>; | |
306 | regulator-mem-off; | |
307 | }; | |
308 | ||
309 | ldo11_reg: ldo11 { | |
310 | regulator-compatible = "LDO11"; | |
311 | regulator-name = "VABB1_1.95V"; | |
312 | regulator-min-microvolt = <1950000>; | |
313 | regulator-max-microvolt = <1950000>; | |
314 | regulator-always-on; | |
315 | regulator-mem-off; | |
316 | }; | |
317 | ||
318 | ldo12_reg: ldo12 { | |
319 | regulator-compatible = "LDO12"; | |
320 | regulator-name = "VUOTG_3.0V"; | |
321 | regulator-min-microvolt = <3000000>; | |
322 | regulator-max-microvolt = <3000000>; | |
323 | regulator-mem-off; | |
324 | }; | |
325 | ||
326 | ldo13_reg: ldo13 { | |
327 | regulator-compatible = "LDO13"; | |
328 | regulator-name = "NFC_AVDD_1.8V"; | |
329 | regulator-min-microvolt = <1800000>; | |
330 | regulator-max-microvolt = <1800000>; | |
331 | regulator-mem-idle; | |
332 | }; | |
333 | ||
334 | ldo14_reg: ldo14 { | |
335 | regulator-compatible = "LDO14"; | |
336 | regulator-name = "VABB2_1.95V"; | |
337 | regulator-min-microvolt = <1950000>; | |
338 | regulator-max-microvolt = <1950000>; | |
339 | regulator-always-on; | |
340 | regulator-mem-off; | |
341 | }; | |
342 | ||
343 | ldo15_reg: ldo15 { | |
344 | regulator-compatible = "LDO15"; | |
345 | regulator-name = "VHSIC_1.0V"; | |
346 | regulator-min-microvolt = <1000000>; | |
347 | regulator-max-microvolt = <1000000>; | |
348 | regulator-mem-off; | |
349 | }; | |
350 | ||
351 | ldo16_reg: ldo16 { | |
352 | regulator-compatible = "LDO16"; | |
353 | regulator-name = "VHSIC_1.8V"; | |
354 | regulator-min-microvolt = <1800000>; | |
355 | regulator-max-microvolt = <1800000>; | |
356 | regulator-mem-off; | |
357 | }; | |
358 | ||
359 | ldo17_reg: ldo17 { | |
360 | regulator-compatible = "LDO17"; | |
361 | regulator-name = "CAM_SENSOR_CORE_1.2V"; | |
362 | regulator-min-microvolt = <1200000>; | |
363 | regulator-max-microvolt = <1200000>; | |
364 | regulator-mem-idle; | |
365 | }; | |
366 | ||
367 | ldo18_reg: ldo18 { | |
368 | regulator-compatible = "LDO18"; | |
369 | regulator-name = "CAM_ISP_SEN_IO_1.8V"; | |
370 | regulator-min-microvolt = <1800000>; | |
371 | regulator-max-microvolt = <1800000>; | |
372 | regulator-mem-idle; | |
373 | }; | |
374 | ||
375 | ldo19_reg: ldo19 { | |
376 | regulator-compatible = "LDO19"; | |
377 | regulator-name = "VT_CAM_1.8V"; | |
378 | regulator-min-microvolt = <1800000>; | |
379 | regulator-max-microvolt = <1800000>; | |
380 | regulator-mem-idle; | |
381 | }; | |
382 | ||
383 | ldo20_reg: ldo20 { | |
384 | regulator-compatible = "LDO20"; | |
385 | regulator-name = "VDDQ_PRE_1.8V"; | |
386 | regulator-min-microvolt = <1800000>; | |
387 | regulator-max-microvolt = <1800000>; | |
388 | regulator-mem-idle; | |
389 | }; | |
390 | ||
391 | ldo21_reg: ldo21 { | |
392 | regulator-compatible = "LDO21"; | |
393 | regulator-name = "VTF_2.8V"; | |
394 | regulator-min-microvolt = <2800000>; | |
395 | regulator-max-microvolt = <2800000>; | |
396 | regulator-mem-idle; | |
397 | }; | |
398 | ||
399 | ldo22_reg: ldo22 { | |
400 | regulator-compatible = "LDO22"; | |
401 | regulator-name = "VMEM_VDD_2.8V"; | |
402 | regulator-min-microvolt = <2800000>; | |
403 | regulator-max-microvolt = <2800000>; | |
15dfdfad TF |
404 | }; |
405 | ||
406 | ldo23_reg: ldo23 { | |
407 | regulator-compatible = "LDO23"; | |
408 | regulator-name = "TSP_AVDD_3.3V"; | |
409 | regulator-min-microvolt = <3300000>; | |
410 | regulator-max-microvolt = <3300000>; | |
411 | regulator-mem-idle; | |
412 | }; | |
413 | ||
414 | ldo24_reg: ldo24 { | |
415 | regulator-compatible = "LDO24"; | |
416 | regulator-name = "TSP_VDD_1.8V"; | |
417 | regulator-min-microvolt = <1800000>; | |
418 | regulator-max-microvolt = <1800000>; | |
419 | regulator-mem-idle; | |
420 | }; | |
421 | ||
422 | ldo25_reg: ldo25 { | |
423 | regulator-compatible = "LDO25"; | |
424 | regulator-name = "LCD_VCC_3.3V"; | |
425 | regulator-min-microvolt = <2800000>; | |
426 | regulator-max-microvolt = <2800000>; | |
427 | regulator-mem-idle; | |
428 | }; | |
429 | ||
430 | ldo26_reg: ldo26 { | |
431 | regulator-compatible = "LDO26"; | |
432 | regulator-name = "MOTOR_VCC_3.0V"; | |
433 | regulator-min-microvolt = <3000000>; | |
434 | regulator-max-microvolt = <3000000>; | |
435 | regulator-mem-idle; | |
436 | }; | |
437 | ||
438 | buck1_reg: buck1 { | |
439 | regulator-compatible = "BUCK1"; | |
440 | regulator-name = "vdd_mif"; | |
441 | regulator-min-microvolt = <850000>; | |
442 | regulator-max-microvolt = <1100000>; | |
443 | regulator-always-on; | |
444 | regulator-boot-on; | |
445 | regulator-mem-off; | |
446 | }; | |
447 | ||
448 | buck2_reg: buck2 { | |
449 | regulator-compatible = "BUCK2"; | |
450 | regulator-name = "vdd_arm"; | |
451 | regulator-min-microvolt = <850000>; | |
452 | regulator-max-microvolt = <1500000>; | |
453 | regulator-always-on; | |
454 | regulator-boot-on; | |
455 | regulator-mem-off; | |
456 | }; | |
457 | ||
458 | buck3_reg: buck3 { | |
459 | regulator-compatible = "BUCK3"; | |
460 | regulator-name = "vdd_int"; | |
461 | regulator-min-microvolt = <850000>; | |
462 | regulator-max-microvolt = <1150000>; | |
463 | regulator-always-on; | |
464 | regulator-boot-on; | |
465 | regulator-mem-off; | |
466 | }; | |
467 | ||
468 | buck4_reg: buck4 { | |
469 | regulator-compatible = "BUCK4"; | |
470 | regulator-name = "vdd_g3d"; | |
471 | regulator-min-microvolt = <850000>; | |
472 | regulator-max-microvolt = <1150000>; | |
473 | regulator-boot-on; | |
474 | regulator-mem-off; | |
475 | }; | |
476 | ||
477 | buck5_reg: buck5 { | |
478 | regulator-compatible = "BUCK5"; | |
479 | regulator-name = "VMEM_1.2V_AP"; | |
480 | regulator-min-microvolt = <1200000>; | |
481 | regulator-max-microvolt = <1200000>; | |
482 | regulator-always-on; | |
483 | }; | |
484 | ||
485 | buck6_reg: buck6 { | |
486 | regulator-compatible = "BUCK6"; | |
487 | regulator-name = "VCC_SUB_1.35V"; | |
488 | regulator-min-microvolt = <1350000>; | |
489 | regulator-max-microvolt = <1350000>; | |
490 | regulator-always-on; | |
491 | }; | |
492 | ||
493 | buck7_reg: buck7 { | |
494 | regulator-compatible = "BUCK7"; | |
495 | regulator-name = "VCC_SUB_2.0V"; | |
496 | regulator-min-microvolt = <2000000>; | |
497 | regulator-max-microvolt = <2000000>; | |
498 | regulator-always-on; | |
499 | }; | |
500 | ||
501 | buck8_reg: buck8 { | |
502 | regulator-compatible = "BUCK8"; | |
503 | regulator-name = "VMEM_VDDF_3.0V"; | |
504 | regulator-min-microvolt = <2850000>; | |
505 | regulator-max-microvolt = <2850000>; | |
15dfdfad TF |
506 | }; |
507 | ||
508 | buck9_reg: buck9 { | |
509 | regulator-compatible = "BUCK9"; | |
510 | regulator-name = "CAM_ISP_CORE_1.2V"; | |
511 | regulator-min-microvolt = <1000000>; | |
512 | regulator-max-microvolt = <1200000>; | |
513 | regulator-mem-off; | |
514 | }; | |
515 | }; | |
516 | }; | |
517 | }; | |
518 | ||
7eec1266 KK |
519 | i2c_max77693: i2c-gpio-1 { |
520 | compatible = "i2c-gpio"; | |
521 | gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; | |
522 | i2c-gpio,delay-us = <2>; | |
523 | #address-cells = <1>; | |
524 | #size-cells = <0>; | |
525 | status = "okay"; | |
526 | ||
527 | max77693@66 { | |
528 | compatible = "maxim,max77693"; | |
529 | interrupt-parent = <&gpx1>; | |
530 | interrupts = <5 2>; | |
531 | reg = <0x66>; | |
532 | ||
533 | regulators { | |
534 | esafeout1_reg: ESAFEOUT1@1 { | |
535 | regulator-name = "ESAFEOUT1"; | |
536 | }; | |
537 | esafeout2_reg: ESAFEOUT2@2 { | |
538 | regulator-name = "ESAFEOUT2"; | |
539 | }; | |
540 | charger_reg: CHARGER@0 { | |
541 | regulator-name = "CHARGER"; | |
542 | regulator-min-microamp = <60000>; | |
543 | regulator-max-microamp = <2580000>; | |
544 | }; | |
545 | }; | |
546 | }; | |
547 | }; | |
548 | ||
ca7c11fc TF |
549 | mmc@12550000 { |
550 | num-slots = <1>; | |
ca7c11fc | 551 | broken-cd; |
15dfdfad | 552 | non-removable; |
ca7c11fc | 553 | card-detect-delay = <200>; |
15dfdfad | 554 | vmmc-supply = <&vemmc_reg>; |
ca7c11fc TF |
555 | clock-frequency = <400000000>; |
556 | samsung,dw-mshc-ciu-div = <0>; | |
557 | samsung,dw-mshc-sdr-timing = <2 3>; | |
558 | samsung,dw-mshc-ddr-timing = <1 2>; | |
559 | pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; | |
560 | pinctrl-names = "default"; | |
15dfdfad | 561 | status = "okay"; |
aaa25a5a JC |
562 | bus-width = <8>; |
563 | cap-mmc-highspeed; | |
15dfdfad TF |
564 | }; |
565 | ||
a427d150 KK |
566 | sdhci@12530000 { |
567 | bus-width = <4>; | |
568 | cd-gpios = <&gpx3 4 0>; | |
569 | cd-inverted; | |
570 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; | |
571 | pinctrl-names = "default"; | |
572 | vmmc-supply = <&ldo21_reg>; | |
573 | status = "okay"; | |
574 | }; | |
575 | ||
15dfdfad TF |
576 | serial@13800000 { |
577 | status = "okay"; | |
578 | }; | |
579 | ||
580 | serial@13810000 { | |
581 | status = "okay"; | |
582 | }; | |
583 | ||
584 | serial@13820000 { | |
585 | status = "okay"; | |
586 | }; | |
587 | ||
588 | serial@13830000 { | |
589 | status = "okay"; | |
590 | }; | |
9f1eaef2 | 591 | |
432047f9 LM |
592 | tmu@100C0000 { |
593 | vtmu-supply = <&ldo10_reg>; | |
594 | status = "okay"; | |
595 | }; | |
596 | ||
9f1eaef2 JA |
597 | i2c_ak8975: i2c-gpio-0 { |
598 | compatible = "i2c-gpio"; | |
599 | gpios = <&gpy2 4 0>, <&gpy2 5 0>; | |
600 | i2c-gpio,delay-us = <2>; | |
601 | #address-cells = <1>; | |
602 | #size-cells = <0>; | |
603 | status = "okay"; | |
604 | ||
605 | ak8975@0c { | |
30cc798b | 606 | compatible = "asahi-kasei,ak8975"; |
9f1eaef2 JA |
607 | reg = <0x0c>; |
608 | gpios = <&gpj0 7 0>; | |
609 | }; | |
610 | }; | |
b4fec647 | 611 | |
85cb4e0b BS |
612 | i2c_cm36651: i2c-gpio-2 { |
613 | compatible = "i2c-gpio"; | |
614 | gpios = <&gpf0 0 1>, <&gpf0 1 1>; | |
615 | i2c-gpio,delay-us = <2>; | |
616 | #address-cells = <1>; | |
617 | #size-cells = <0>; | |
618 | ||
619 | cm36651@18 { | |
620 | compatible = "capella,cm36651"; | |
621 | reg = <0x18>; | |
622 | interrupt-parent = <&gpx0>; | |
623 | interrupts = <2 2>; | |
624 | vled-supply = <&ps_als_reg>; | |
625 | }; | |
626 | }; | |
627 | ||
201f1267 AH |
628 | spi_1: spi@13930000 { |
629 | pinctrl-names = "default"; | |
630 | pinctrl-0 = <&spi1_bus>; | |
e138d433 | 631 | cs-gpios = <&gpb 5 0>; |
201f1267 AH |
632 | status = "okay"; |
633 | ||
634 | s5c73m3_spi: s5c73m3 { | |
635 | compatible = "samsung,s5c73m3"; | |
636 | spi-max-frequency = <50000000>; | |
637 | reg = <0>; | |
638 | controller-data { | |
201f1267 AH |
639 | samsung,spi-feedback-delay = <2>; |
640 | }; | |
641 | }; | |
642 | }; | |
643 | ||
249358cb JK |
644 | pwm: pwm@139D0000 { |
645 | pinctrl-0 = <&pwm0_out>; | |
646 | pinctrl-names = "default"; | |
647 | samsung,pwm-outputs = <0>; | |
648 | status = "okay"; | |
649 | }; | |
650 | ||
420ae845 AH |
651 | dsi_0: dsi@11C80000 { |
652 | vddcore-supply = <&ldo8_reg>; | |
653 | vddio-supply = <&ldo10_reg>; | |
654 | samsung,pll-clock-frequency = <24000000>; | |
655 | status = "okay"; | |
656 | ||
657 | ports { | |
658 | #address-cells = <1>; | |
659 | #size-cells = <0>; | |
660 | ||
661 | port@1 { | |
662 | reg = <1>; | |
663 | ||
664 | dsi_out: endpoint { | |
665 | remote-endpoint = <&dsi_in>; | |
666 | samsung,burst-clock-frequency = <500000000>; | |
667 | samsung,esc-clock-frequency = <20000000>; | |
668 | }; | |
669 | }; | |
670 | }; | |
671 | ||
672 | panel@0 { | |
673 | compatible = "samsung,s6e8aa0"; | |
674 | reg = <0>; | |
675 | vdd3-supply = <&lcd_vdd3_reg>; | |
676 | vci-supply = <&ldo25_reg>; | |
677 | reset-gpios = <&gpy4 5 0>; | |
678 | power-on-delay= <50>; | |
679 | reset-delay = <100>; | |
680 | init-delay = <100>; | |
681 | flip-horizontal; | |
682 | flip-vertical; | |
683 | panel-width-mm = <58>; | |
684 | panel-height-mm = <103>; | |
685 | ||
686 | display-timings { | |
687 | timing-0 { | |
688 | clock-frequency = <0>; | |
689 | hactive = <720>; | |
690 | vactive = <1280>; | |
691 | hfront-porch = <5>; | |
692 | hback-porch = <5>; | |
693 | hsync-len = <5>; | |
694 | vfront-porch = <13>; | |
695 | vback-porch = <1>; | |
696 | vsync-len = <2>; | |
697 | }; | |
698 | }; | |
699 | ||
700 | port { | |
701 | dsi_in: endpoint { | |
702 | remote-endpoint = <&dsi_out>; | |
703 | }; | |
704 | }; | |
705 | }; | |
706 | }; | |
707 | ||
bbab1e3f AH |
708 | fimd@11c00000 { |
709 | status = "okay"; | |
710 | }; | |
711 | ||
4cb37864 SN |
712 | camera: camera { |
713 | pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; | |
b4fec647 SN |
714 | pinctrl-names = "default"; |
715 | status = "okay"; | |
0357a443 SN |
716 | assigned-clocks = <&clock CLK_MOUT_CAM0>, |
717 | <&clock CLK_MOUT_CAM1>; | |
718 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>, | |
719 | <&clock CLK_MOUT_MPLL_USER_T>; | |
b4fec647 SN |
720 | |
721 | fimc_0: fimc@11800000 { | |
722 | status = "okay"; | |
0357a443 SN |
723 | assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
724 | <&clock CLK_SCLK_FIMC0>; | |
725 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
726 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
727 | }; |
728 | ||
729 | fimc_1: fimc@11810000 { | |
730 | status = "okay"; | |
0357a443 SN |
731 | assigned-clocks = <&clock CLK_MOUT_FIMC1>, |
732 | <&clock CLK_SCLK_FIMC1>; | |
733 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
734 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
735 | }; |
736 | ||
737 | fimc_2: fimc@11820000 { | |
738 | status = "okay"; | |
0357a443 SN |
739 | assigned-clocks = <&clock CLK_MOUT_FIMC2>, |
740 | <&clock CLK_SCLK_FIMC2>; | |
741 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
742 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
743 | }; |
744 | ||
745 | fimc_3: fimc@11830000 { | |
746 | status = "okay"; | |
0357a443 SN |
747 | assigned-clocks = <&clock CLK_MOUT_FIMC3>, |
748 | <&clock CLK_SCLK_FIMC3>; | |
749 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
750 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
751 | }; |
752 | ||
4cb37864 SN |
753 | csis_0: csis@11880000 { |
754 | status = "okay"; | |
755 | vddcore-supply = <&ldo8_reg>; | |
756 | vddio-supply = <&ldo10_reg>; | |
0357a443 SN |
757 | assigned-clocks = <&clock CLK_MOUT_CSIS0>, |
758 | <&clock CLK_SCLK_CSIS0>; | |
759 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
760 | assigned-clock-rates = <0>, <176000000>; | |
4cb37864 SN |
761 | |
762 | /* Camera C (3) MIPI CSI-2 (CSIS0) */ | |
763 | port@3 { | |
764 | reg = <3>; | |
765 | csis0_ep: endpoint { | |
766 | remote-endpoint = <&s5c73m3_ep>; | |
767 | data-lanes = <1 2 3 4>; | |
768 | samsung,csis-hs-settle = <12>; | |
769 | }; | |
770 | }; | |
771 | }; | |
772 | ||
b4fec647 | 773 | csis_1: csis@11890000 { |
0357a443 | 774 | status = "okay"; |
b4fec647 SN |
775 | vddcore-supply = <&ldo8_reg>; |
776 | vddio-supply = <&ldo10_reg>; | |
0357a443 SN |
777 | assigned-clocks = <&clock CLK_MOUT_CSIS1>, |
778 | <&clock CLK_SCLK_CSIS1>; | |
779 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
780 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
781 | |
782 | /* Camera D (4) MIPI CSI-2 (CSIS1) */ | |
783 | port@4 { | |
784 | reg = <4>; | |
785 | csis1_ep: endpoint { | |
786 | remote-endpoint = <&is_s5k6a3_ep>; | |
787 | data-lanes = <1>; | |
788 | samsung,csis-hs-settle = <18>; | |
789 | samsung,csis-wclk; | |
790 | }; | |
791 | }; | |
792 | }; | |
793 | ||
794 | fimc_lite_0: fimc-lite@12390000 { | |
795 | status = "okay"; | |
796 | }; | |
797 | ||
798 | fimc_lite_1: fimc-lite@123A0000 { | |
799 | status = "okay"; | |
800 | }; | |
801 | ||
802 | fimc-is@12000000 { | |
803 | pinctrl-0 = <&fimc_is_uart>; | |
804 | pinctrl-names = "default"; | |
805 | status = "okay"; | |
806 | ||
807 | i2c1_isp: i2c-isp@12140000 { | |
808 | pinctrl-0 = <&fimc_is_i2c1>; | |
809 | pinctrl-names = "default"; | |
810 | ||
811 | s5k6a3@10 { | |
812 | compatible = "samsung,s5k6a3"; | |
813 | reg = <0x10>; | |
814 | svdda-supply = <&cam_io_reg>; | |
815 | svddio-supply = <&ldo19_reg>; | |
ee5eda64 | 816 | afvdd-supply = <&ldo19_reg>; |
b4fec647 SN |
817 | clock-frequency = <24000000>; |
818 | /* CAM_B_CLKOUT */ | |
ee5eda64 SN |
819 | clocks = <&camera 1>; |
820 | clock-names = "extclk"; | |
b4fec647 SN |
821 | samsung,camclk-out = <1>; |
822 | gpios = <&gpm1 6 0>; | |
823 | ||
824 | port { | |
825 | is_s5k6a3_ep: endpoint { | |
826 | remote-endpoint = <&csis1_ep>; | |
827 | data-lanes = <1>; | |
828 | }; | |
829 | }; | |
830 | }; | |
831 | }; | |
832 | }; | |
833 | }; | |
4f423788 | 834 | |
3c8977f1 CP |
835 | exynos-usbphy@125B0000 { |
836 | status = "okay"; | |
837 | }; | |
838 | ||
839 | hsotg@12480000 { | |
840 | vusb_d-supply = <&ldo15_reg>; | |
841 | vusb_a-supply = <&ldo12_reg>; | |
842 | status = "okay"; | |
843 | }; | |
844 | ||
4f423788 CC |
845 | thermistor-ap@0 { |
846 | compatible = "ntc,ncp15wb473"; | |
847 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ | |
848 | pullup-ohm = <100000>; /* 100K */ | |
849 | pulldown-ohm = <100000>; /* 100K */ | |
850 | io-channels = <&adc 1>; /* AP temperature */ | |
851 | }; | |
852 | ||
853 | thermistor-battery@1 { | |
854 | compatible = "ntc,ncp15wb473"; | |
855 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ | |
856 | pullup-ohm = <100000>; /* 100K */ | |
857 | pulldown-ohm = <100000>; /* 100K */ | |
858 | io-channels = <&adc 2>; /* Battery temperature */ | |
859 | }; | |
15dfdfad | 860 | }; |
09918a98 TF |
861 | |
862 | &pinctrl_0 { | |
863 | pinctrl-names = "default"; | |
864 | pinctrl-0 = <&sleep0>; | |
865 | ||
866 | sleep0: sleep-states { | |
867 | PIN_SLP(gpa0-0, INPUT, NONE); | |
868 | PIN_SLP(gpa0-1, OUT0, NONE); | |
869 | PIN_SLP(gpa0-2, INPUT, NONE); | |
870 | PIN_SLP(gpa0-3, INPUT, UP); | |
871 | PIN_SLP(gpa0-4, INPUT, NONE); | |
872 | PIN_SLP(gpa0-5, INPUT, DOWN); | |
873 | PIN_SLP(gpa0-6, INPUT, DOWN); | |
874 | PIN_SLP(gpa0-7, INPUT, UP); | |
875 | ||
876 | PIN_SLP(gpa1-0, INPUT, DOWN); | |
877 | PIN_SLP(gpa1-1, INPUT, DOWN); | |
878 | PIN_SLP(gpa1-2, INPUT, DOWN); | |
879 | PIN_SLP(gpa1-3, INPUT, DOWN); | |
880 | PIN_SLP(gpa1-4, INPUT, DOWN); | |
881 | PIN_SLP(gpa1-5, INPUT, DOWN); | |
882 | ||
883 | PIN_SLP(gpb-0, INPUT, NONE); | |
884 | PIN_SLP(gpb-1, INPUT, NONE); | |
885 | PIN_SLP(gpb-2, INPUT, NONE); | |
886 | PIN_SLP(gpb-3, INPUT, NONE); | |
887 | PIN_SLP(gpb-4, INPUT, DOWN); | |
888 | PIN_SLP(gpb-5, INPUT, UP); | |
889 | PIN_SLP(gpb-6, INPUT, DOWN); | |
890 | PIN_SLP(gpb-7, INPUT, DOWN); | |
891 | ||
892 | PIN_SLP(gpc0-0, INPUT, DOWN); | |
893 | PIN_SLP(gpc0-1, INPUT, DOWN); | |
894 | PIN_SLP(gpc0-2, INPUT, DOWN); | |
895 | PIN_SLP(gpc0-3, INPUT, DOWN); | |
896 | PIN_SLP(gpc0-4, INPUT, DOWN); | |
897 | ||
898 | PIN_SLP(gpc1-0, INPUT, NONE); | |
899 | PIN_SLP(gpc1-1, PREV, NONE); | |
900 | PIN_SLP(gpc1-2, INPUT, NONE); | |
901 | PIN_SLP(gpc1-3, INPUT, NONE); | |
902 | PIN_SLP(gpc1-4, INPUT, NONE); | |
903 | ||
904 | PIN_SLP(gpd0-0, INPUT, DOWN); | |
905 | PIN_SLP(gpd0-1, INPUT, DOWN); | |
906 | PIN_SLP(gpd0-2, INPUT, NONE); | |
907 | PIN_SLP(gpd0-3, INPUT, NONE); | |
908 | ||
909 | PIN_SLP(gpd1-0, INPUT, DOWN); | |
910 | PIN_SLP(gpd1-1, INPUT, DOWN); | |
911 | PIN_SLP(gpd1-2, INPUT, NONE); | |
912 | PIN_SLP(gpd1-3, INPUT, NONE); | |
913 | ||
914 | PIN_SLP(gpf0-0, INPUT, NONE); | |
915 | PIN_SLP(gpf0-1, INPUT, NONE); | |
916 | PIN_SLP(gpf0-2, INPUT, DOWN); | |
917 | PIN_SLP(gpf0-3, INPUT, DOWN); | |
918 | PIN_SLP(gpf0-4, INPUT, NONE); | |
919 | PIN_SLP(gpf0-5, INPUT, DOWN); | |
920 | PIN_SLP(gpf0-6, INPUT, NONE); | |
921 | PIN_SLP(gpf0-7, INPUT, DOWN); | |
922 | ||
923 | PIN_SLP(gpf1-0, INPUT, DOWN); | |
924 | PIN_SLP(gpf1-1, INPUT, DOWN); | |
925 | PIN_SLP(gpf1-2, INPUT, DOWN); | |
926 | PIN_SLP(gpf1-3, INPUT, DOWN); | |
927 | PIN_SLP(gpf1-4, INPUT, NONE); | |
928 | PIN_SLP(gpf1-5, INPUT, NONE); | |
929 | PIN_SLP(gpf1-6, INPUT, DOWN); | |
930 | PIN_SLP(gpf1-7, PREV, NONE); | |
931 | ||
932 | PIN_SLP(gpf2-0, PREV, NONE); | |
933 | PIN_SLP(gpf2-1, INPUT, DOWN); | |
934 | PIN_SLP(gpf2-2, INPUT, DOWN); | |
935 | PIN_SLP(gpf2-3, INPUT, DOWN); | |
936 | PIN_SLP(gpf2-4, INPUT, DOWN); | |
937 | PIN_SLP(gpf2-5, INPUT, DOWN); | |
938 | PIN_SLP(gpf2-6, INPUT, NONE); | |
939 | PIN_SLP(gpf2-7, INPUT, NONE); | |
940 | ||
941 | PIN_SLP(gpf3-0, INPUT, NONE); | |
942 | PIN_SLP(gpf3-1, PREV, NONE); | |
943 | PIN_SLP(gpf3-2, PREV, NONE); | |
944 | PIN_SLP(gpf3-3, PREV, NONE); | |
945 | PIN_SLP(gpf3-4, OUT1, NONE); | |
946 | PIN_SLP(gpf3-5, INPUT, DOWN); | |
947 | ||
948 | PIN_SLP(gpj0-0, PREV, NONE); | |
949 | PIN_SLP(gpj0-1, PREV, NONE); | |
950 | PIN_SLP(gpj0-2, PREV, NONE); | |
951 | PIN_SLP(gpj0-3, INPUT, DOWN); | |
952 | PIN_SLP(gpj0-4, PREV, NONE); | |
953 | PIN_SLP(gpj0-5, PREV, NONE); | |
954 | PIN_SLP(gpj0-6, INPUT, DOWN); | |
955 | PIN_SLP(gpj0-7, INPUT, DOWN); | |
956 | ||
957 | PIN_SLP(gpj1-0, INPUT, DOWN); | |
958 | PIN_SLP(gpj1-1, PREV, NONE); | |
959 | PIN_SLP(gpj1-2, PREV, NONE); | |
960 | PIN_SLP(gpj1-3, INPUT, DOWN); | |
961 | PIN_SLP(gpj1-4, INPUT, DOWN); | |
962 | }; | |
963 | }; | |
964 | ||
965 | &pinctrl_1 { | |
966 | pinctrl-names = "default"; | |
967 | pinctrl-0 = <&sleep1>; | |
968 | ||
969 | sleep1: sleep-states { | |
970 | PIN_SLP(gpk0-0, PREV, NONE); | |
971 | PIN_SLP(gpk0-1, PREV, NONE); | |
972 | PIN_SLP(gpk0-2, OUT0, NONE); | |
973 | PIN_SLP(gpk0-3, PREV, NONE); | |
974 | PIN_SLP(gpk0-4, PREV, NONE); | |
975 | PIN_SLP(gpk0-5, PREV, NONE); | |
976 | PIN_SLP(gpk0-6, PREV, NONE); | |
977 | ||
978 | PIN_SLP(gpk1-0, INPUT, DOWN); | |
979 | PIN_SLP(gpk1-1, INPUT, DOWN); | |
980 | PIN_SLP(gpk1-2, INPUT, DOWN); | |
981 | PIN_SLP(gpk1-3, PREV, NONE); | |
982 | PIN_SLP(gpk1-4, PREV, NONE); | |
983 | PIN_SLP(gpk1-5, PREV, NONE); | |
984 | PIN_SLP(gpk1-6, PREV, NONE); | |
985 | ||
986 | PIN_SLP(gpk2-0, INPUT, DOWN); | |
987 | PIN_SLP(gpk2-1, INPUT, DOWN); | |
988 | PIN_SLP(gpk2-2, INPUT, DOWN); | |
989 | PIN_SLP(gpk2-3, INPUT, DOWN); | |
990 | PIN_SLP(gpk2-4, INPUT, DOWN); | |
991 | PIN_SLP(gpk2-5, INPUT, DOWN); | |
992 | PIN_SLP(gpk2-6, INPUT, DOWN); | |
993 | ||
994 | PIN_SLP(gpk3-0, OUT0, NONE); | |
995 | PIN_SLP(gpk3-1, INPUT, NONE); | |
996 | PIN_SLP(gpk3-2, INPUT, DOWN); | |
997 | PIN_SLP(gpk3-3, INPUT, NONE); | |
998 | PIN_SLP(gpk3-4, INPUT, NONE); | |
999 | PIN_SLP(gpk3-5, INPUT, NONE); | |
1000 | PIN_SLP(gpk3-6, INPUT, NONE); | |
1001 | ||
1002 | PIN_SLP(gpl0-0, INPUT, DOWN); | |
1003 | PIN_SLP(gpl0-1, INPUT, DOWN); | |
1004 | PIN_SLP(gpl0-2, INPUT, DOWN); | |
1005 | PIN_SLP(gpl0-3, INPUT, DOWN); | |
1006 | PIN_SLP(gpl0-4, PREV, NONE); | |
1007 | PIN_SLP(gpl0-6, PREV, NONE); | |
1008 | ||
1009 | PIN_SLP(gpl1-0, INPUT, DOWN); | |
1010 | PIN_SLP(gpl1-1, INPUT, DOWN); | |
1011 | PIN_SLP(gpl2-0, INPUT, DOWN); | |
1012 | PIN_SLP(gpl2-1, INPUT, DOWN); | |
1013 | PIN_SLP(gpl2-2, INPUT, DOWN); | |
1014 | PIN_SLP(gpl2-3, INPUT, DOWN); | |
1015 | PIN_SLP(gpl2-4, INPUT, DOWN); | |
1016 | PIN_SLP(gpl2-5, INPUT, DOWN); | |
1017 | PIN_SLP(gpl2-6, PREV, NONE); | |
1018 | PIN_SLP(gpl2-7, INPUT, DOWN); | |
1019 | ||
1020 | PIN_SLP(gpm0-0, INPUT, DOWN); | |
1021 | PIN_SLP(gpm0-1, INPUT, DOWN); | |
1022 | PIN_SLP(gpm0-2, INPUT, DOWN); | |
1023 | PIN_SLP(gpm0-3, INPUT, DOWN); | |
1024 | PIN_SLP(gpm0-4, INPUT, DOWN); | |
1025 | PIN_SLP(gpm0-5, INPUT, DOWN); | |
1026 | PIN_SLP(gpm0-6, INPUT, DOWN); | |
1027 | PIN_SLP(gpm0-7, INPUT, DOWN); | |
1028 | ||
1029 | PIN_SLP(gpm1-0, INPUT, DOWN); | |
1030 | PIN_SLP(gpm1-1, INPUT, DOWN); | |
1031 | PIN_SLP(gpm1-2, INPUT, NONE); | |
1032 | PIN_SLP(gpm1-3, INPUT, NONE); | |
1033 | PIN_SLP(gpm1-4, INPUT, NONE); | |
1034 | PIN_SLP(gpm1-5, INPUT, NONE); | |
1035 | PIN_SLP(gpm1-6, INPUT, DOWN); | |
1036 | ||
1037 | PIN_SLP(gpm2-0, INPUT, NONE); | |
1038 | PIN_SLP(gpm2-1, INPUT, NONE); | |
1039 | PIN_SLP(gpm2-2, INPUT, DOWN); | |
1040 | PIN_SLP(gpm2-3, INPUT, DOWN); | |
1041 | PIN_SLP(gpm2-4, INPUT, DOWN); | |
1042 | ||
1043 | PIN_SLP(gpm3-0, PREV, NONE); | |
1044 | PIN_SLP(gpm3-1, PREV, NONE); | |
1045 | PIN_SLP(gpm3-2, PREV, NONE); | |
1046 | PIN_SLP(gpm3-3, OUT1, NONE); | |
1047 | PIN_SLP(gpm3-4, INPUT, DOWN); | |
1048 | PIN_SLP(gpm3-5, INPUT, DOWN); | |
1049 | PIN_SLP(gpm3-6, INPUT, DOWN); | |
1050 | PIN_SLP(gpm3-7, INPUT, DOWN); | |
1051 | ||
1052 | PIN_SLP(gpm4-0, INPUT, DOWN); | |
1053 | PIN_SLP(gpm4-1, INPUT, DOWN); | |
1054 | PIN_SLP(gpm4-2, INPUT, DOWN); | |
1055 | PIN_SLP(gpm4-3, INPUT, DOWN); | |
1056 | PIN_SLP(gpm4-4, INPUT, DOWN); | |
1057 | PIN_SLP(gpm4-5, INPUT, DOWN); | |
1058 | PIN_SLP(gpm4-6, INPUT, DOWN); | |
1059 | PIN_SLP(gpm4-7, INPUT, DOWN); | |
1060 | ||
1061 | PIN_SLP(gpy0-0, INPUT, DOWN); | |
1062 | PIN_SLP(gpy0-1, INPUT, DOWN); | |
1063 | PIN_SLP(gpy0-2, INPUT, DOWN); | |
1064 | PIN_SLP(gpy0-3, INPUT, DOWN); | |
1065 | PIN_SLP(gpy0-4, INPUT, DOWN); | |
1066 | PIN_SLP(gpy0-5, INPUT, DOWN); | |
1067 | ||
1068 | PIN_SLP(gpy1-0, INPUT, DOWN); | |
1069 | PIN_SLP(gpy1-1, INPUT, DOWN); | |
1070 | PIN_SLP(gpy1-2, INPUT, DOWN); | |
1071 | PIN_SLP(gpy1-3, INPUT, DOWN); | |
1072 | ||
1073 | PIN_SLP(gpy2-0, PREV, NONE); | |
1074 | PIN_SLP(gpy2-1, INPUT, DOWN); | |
1075 | PIN_SLP(gpy2-2, INPUT, NONE); | |
1076 | PIN_SLP(gpy2-3, INPUT, NONE); | |
1077 | PIN_SLP(gpy2-4, INPUT, NONE); | |
1078 | PIN_SLP(gpy2-5, INPUT, NONE); | |
1079 | ||
1080 | PIN_SLP(gpy3-0, INPUT, DOWN); | |
1081 | PIN_SLP(gpy3-1, INPUT, DOWN); | |
1082 | PIN_SLP(gpy3-2, INPUT, DOWN); | |
1083 | PIN_SLP(gpy3-3, INPUT, DOWN); | |
1084 | PIN_SLP(gpy3-4, INPUT, DOWN); | |
1085 | PIN_SLP(gpy3-5, INPUT, DOWN); | |
1086 | PIN_SLP(gpy3-6, INPUT, DOWN); | |
1087 | PIN_SLP(gpy3-7, INPUT, DOWN); | |
1088 | ||
1089 | PIN_SLP(gpy4-0, INPUT, DOWN); | |
1090 | PIN_SLP(gpy4-1, INPUT, DOWN); | |
1091 | PIN_SLP(gpy4-2, INPUT, DOWN); | |
1092 | PIN_SLP(gpy4-3, INPUT, DOWN); | |
1093 | PIN_SLP(gpy4-4, INPUT, DOWN); | |
1094 | PIN_SLP(gpy4-5, INPUT, DOWN); | |
1095 | PIN_SLP(gpy4-6, INPUT, DOWN); | |
1096 | PIN_SLP(gpy4-7, INPUT, DOWN); | |
1097 | ||
1098 | PIN_SLP(gpy5-0, INPUT, DOWN); | |
1099 | PIN_SLP(gpy5-1, INPUT, DOWN); | |
1100 | PIN_SLP(gpy5-2, INPUT, DOWN); | |
1101 | PIN_SLP(gpy5-3, INPUT, DOWN); | |
1102 | PIN_SLP(gpy5-4, INPUT, DOWN); | |
1103 | PIN_SLP(gpy5-5, INPUT, DOWN); | |
1104 | PIN_SLP(gpy5-6, INPUT, DOWN); | |
1105 | PIN_SLP(gpy5-7, INPUT, DOWN); | |
1106 | ||
1107 | PIN_SLP(gpy6-0, INPUT, DOWN); | |
1108 | PIN_SLP(gpy6-1, INPUT, DOWN); | |
1109 | PIN_SLP(gpy6-2, INPUT, DOWN); | |
1110 | PIN_SLP(gpy6-3, INPUT, DOWN); | |
1111 | PIN_SLP(gpy6-4, INPUT, DOWN); | |
1112 | PIN_SLP(gpy6-5, INPUT, DOWN); | |
1113 | PIN_SLP(gpy6-6, INPUT, DOWN); | |
1114 | PIN_SLP(gpy6-7, INPUT, DOWN); | |
1115 | }; | |
1116 | }; | |
1117 | ||
1118 | &pinctrl_2 { | |
1119 | pinctrl-names = "default"; | |
1120 | pinctrl-0 = <&sleep2>; | |
1121 | ||
1122 | sleep2: sleep-states { | |
1123 | PIN_SLP(gpz-0, INPUT, DOWN); | |
1124 | PIN_SLP(gpz-1, INPUT, DOWN); | |
1125 | PIN_SLP(gpz-2, INPUT, DOWN); | |
1126 | PIN_SLP(gpz-3, INPUT, DOWN); | |
1127 | PIN_SLP(gpz-4, INPUT, DOWN); | |
1128 | PIN_SLP(gpz-5, INPUT, DOWN); | |
1129 | PIN_SLP(gpz-6, INPUT, DOWN); | |
1130 | }; | |
1131 | }; | |
1132 | ||
1133 | &pinctrl_3 { | |
1134 | pinctrl-names = "default"; | |
1135 | pinctrl-0 = <&sleep3>; | |
1136 | ||
1137 | sleep3: sleep-states { | |
1138 | PIN_SLP(gpv0-0, INPUT, DOWN); | |
1139 | PIN_SLP(gpv0-1, INPUT, DOWN); | |
1140 | PIN_SLP(gpv0-2, INPUT, DOWN); | |
1141 | PIN_SLP(gpv0-3, INPUT, DOWN); | |
1142 | PIN_SLP(gpv0-4, INPUT, DOWN); | |
1143 | PIN_SLP(gpv0-5, INPUT, DOWN); | |
1144 | PIN_SLP(gpv0-6, INPUT, DOWN); | |
1145 | PIN_SLP(gpv0-7, INPUT, DOWN); | |
1146 | ||
1147 | PIN_SLP(gpv1-0, INPUT, DOWN); | |
1148 | PIN_SLP(gpv1-1, INPUT, DOWN); | |
1149 | PIN_SLP(gpv1-2, INPUT, DOWN); | |
1150 | PIN_SLP(gpv1-3, INPUT, DOWN); | |
1151 | PIN_SLP(gpv1-4, INPUT, DOWN); | |
1152 | PIN_SLP(gpv1-5, INPUT, DOWN); | |
1153 | PIN_SLP(gpv1-6, INPUT, DOWN); | |
1154 | PIN_SLP(gpv1-7, INPUT, DOWN); | |
1155 | ||
1156 | PIN_SLP(gpv2-0, INPUT, DOWN); | |
1157 | PIN_SLP(gpv2-1, INPUT, DOWN); | |
1158 | PIN_SLP(gpv2-2, INPUT, DOWN); | |
1159 | PIN_SLP(gpv2-3, INPUT, DOWN); | |
1160 | PIN_SLP(gpv2-4, INPUT, DOWN); | |
1161 | PIN_SLP(gpv2-5, INPUT, DOWN); | |
1162 | PIN_SLP(gpv2-6, INPUT, DOWN); | |
1163 | PIN_SLP(gpv2-7, INPUT, DOWN); | |
1164 | ||
1165 | PIN_SLP(gpv3-0, INPUT, DOWN); | |
1166 | PIN_SLP(gpv3-1, INPUT, DOWN); | |
1167 | PIN_SLP(gpv3-2, INPUT, DOWN); | |
1168 | PIN_SLP(gpv3-3, INPUT, DOWN); | |
1169 | PIN_SLP(gpv3-4, INPUT, DOWN); | |
1170 | PIN_SLP(gpv3-5, INPUT, DOWN); | |
1171 | PIN_SLP(gpv3-6, INPUT, DOWN); | |
1172 | PIN_SLP(gpv3-7, INPUT, DOWN); | |
1173 | ||
1174 | PIN_SLP(gpv4-0, INPUT, DOWN); | |
1175 | }; | |
1176 | }; |