Commit | Line | Data |
---|---|---|
15dfdfad TF |
1 | /* |
2 | * Samsung's Exynos4412 based Trats 2 board device tree source | |
3 | * | |
4 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Trats 2 board which is based on | |
8 | * Samsung's Exynos4412 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
16 | #include "exynos4412.dtsi" | |
4a80467a | 17 | #include "exynos4412-ppmu-common.dtsi" |
7eec1266 | 18 | #include <dt-bindings/gpio/gpio.h> |
e8614292 | 19 | #include <dt-bindings/interrupt-controller/irq.h> |
ce9940a9 | 20 | #include <dt-bindings/clock/maxim,max77686.h> |
5fb9ae88 | 21 | #include <dt-bindings/pinctrl/samsung.h> |
15dfdfad TF |
22 | |
23 | / { | |
24 | model = "Samsung Trats 2 based on Exynos4412"; | |
8bdb31b4 | 25 | compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; |
15dfdfad | 26 | |
9f1eaef2 | 27 | aliases { |
6af2ba90 | 28 | i2c9 = &i2c_ak8975; |
85cb4e0b | 29 | i2c10 = &i2c_cm36651; |
7eec1266 | 30 | i2c11 = &i2c_max77693; |
e8614292 | 31 | i2c12 = &i2c_max77693_fuel; |
9f1eaef2 JA |
32 | }; |
33 | ||
824e4133 | 34 | memory@40000000 { |
1354835a | 35 | device_type = "memory"; |
15dfdfad TF |
36 | reg = <0x40000000 0x40000000>; |
37 | }; | |
38 | ||
39 | chosen { | |
40 | bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; | |
62d38099 | 41 | stdout-path = &serial_2; |
15dfdfad TF |
42 | }; |
43 | ||
8dccafaa | 44 | firmware@204f000 { |
15dfdfad TF |
45 | compatible = "samsung,secure-firmware"; |
46 | reg = <0x0204F000 0x1000>; | |
47 | }; | |
48 | ||
49 | fixed-rate-clocks { | |
50 | xxti { | |
51 | compatible = "samsung,clock-xxti", "fixed-clock"; | |
52 | clock-frequency = <0>; | |
53 | }; | |
54 | ||
55 | xusbxti { | |
56 | compatible = "samsung,clock-xusbxti", "fixed-clock"; | |
57 | clock-frequency = <24000000>; | |
58 | }; | |
59 | }; | |
60 | ||
61 | regulators { | |
62 | compatible = "simple-bus"; | |
63 | #address-cells = <1>; | |
64 | #size-cells = <0>; | |
65 | ||
b4fec647 SN |
66 | cam_io_reg: voltage-regulator-1 { |
67 | compatible = "regulator-fixed"; | |
68 | regulator-name = "CAM_SENSOR_A"; | |
69 | regulator-min-microvolt = <2800000>; | |
70 | regulator-max-microvolt = <2800000>; | |
c10d3290 | 71 | gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; |
b4fec647 SN |
72 | enable-active-high; |
73 | }; | |
74 | ||
420ae845 AH |
75 | lcd_vdd3_reg: voltage-regulator-2 { |
76 | compatible = "regulator-fixed"; | |
77 | regulator-name = "LCD_VDD_2.2V"; | |
78 | regulator-min-microvolt = <2200000>; | |
79 | regulator-max-microvolt = <2200000>; | |
c10d3290 | 80 | gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; |
420ae845 AH |
81 | enable-active-high; |
82 | }; | |
83 | ||
4cb37864 SN |
84 | cam_af_reg: voltage-regulator-3 { |
85 | compatible = "regulator-fixed"; | |
86 | regulator-name = "CAM_AF"; | |
87 | regulator-min-microvolt = <2800000>; | |
88 | regulator-max-microvolt = <2800000>; | |
c10d3290 | 89 | gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; |
4cb37864 SN |
90 | enable-active-high; |
91 | }; | |
92 | ||
85cb4e0b BS |
93 | ps_als_reg: voltage-regulator-5 { |
94 | compatible = "regulator-fixed"; | |
95 | regulator-name = "LED_A_3.0V"; | |
96 | regulator-min-microvolt = <3000000>; | |
97 | regulator-max-microvolt = <3000000>; | |
c10d3290 | 98 | gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; |
85cb4e0b BS |
99 | enable-active-high; |
100 | }; | |
5fb9ae88 MP |
101 | |
102 | vsil12: voltage-regulator-6 { | |
103 | compatible = "regulator-fixed"; | |
104 | regulator-name = "VSIL_1.2V"; | |
105 | regulator-min-microvolt = <1200000>; | |
106 | regulator-max-microvolt = <1200000>; | |
107 | gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; | |
108 | enable-active-high; | |
109 | vin-supply = <&buck7_reg>; | |
110 | }; | |
111 | ||
112 | vcc33mhl: voltage-regulator-7 { | |
113 | compatible = "regulator-fixed"; | |
114 | regulator-name = "VCC_3.3_MHL"; | |
115 | regulator-min-microvolt = <3300000>; | |
116 | regulator-max-microvolt = <3300000>; | |
117 | gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; | |
118 | enable-active-high; | |
119 | }; | |
120 | ||
121 | vcc18mhl: voltage-regulator-8 { | |
122 | compatible = "regulator-fixed"; | |
123 | regulator-name = "VCC_1.8_MHL"; | |
124 | regulator-min-microvolt = <1800000>; | |
125 | regulator-max-microvolt = <1800000>; | |
126 | gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; | |
127 | enable-active-high; | |
128 | }; | |
15dfdfad TF |
129 | }; |
130 | ||
131 | gpio-keys { | |
132 | compatible = "gpio-keys"; | |
133 | ||
134 | key-down { | |
c10d3290 | 135 | gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; |
15dfdfad TF |
136 | linux,code = <114>; |
137 | label = "volume down"; | |
138 | debounce-interval = <10>; | |
139 | }; | |
140 | ||
141 | key-up { | |
c10d3290 | 142 | gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; |
15dfdfad TF |
143 | linux,code = <115>; |
144 | label = "volume up"; | |
145 | debounce-interval = <10>; | |
146 | }; | |
147 | ||
148 | key-power { | |
c10d3290 | 149 | gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
15dfdfad TF |
150 | linux,code = <116>; |
151 | label = "power"; | |
152 | debounce-interval = <10>; | |
36a0282a | 153 | wakeup-source; |
15dfdfad | 154 | }; |
172ff6c6 BS |
155 | |
156 | key-ok { | |
c10d3290 | 157 | gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; |
172ff6c6 BS |
158 | linux,code = <139>; |
159 | label = "ok"; | |
160 | debounce-inteval = <10>; | |
36a0282a | 161 | wakeup-source; |
172ff6c6 | 162 | }; |
15dfdfad TF |
163 | }; |
164 | ||
7eec1266 KK |
165 | i2c_max77693: i2c-gpio-1 { |
166 | compatible = "i2c-gpio"; | |
167 | gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; | |
168 | i2c-gpio,delay-us = <2>; | |
169 | #address-cells = <1>; | |
170 | #size-cells = <0>; | |
171 | status = "okay"; | |
172 | ||
173 | max77693@66 { | |
174 | compatible = "maxim,max77693"; | |
175 | interrupt-parent = <&gpx1>; | |
6ff0b90d | 176 | interrupts = <5 IRQ_TYPE_EDGE_FALLING>; |
7eec1266 KK |
177 | reg = <0x66>; |
178 | ||
179 | regulators { | |
26ee29a6 | 180 | esafeout1_reg: ESAFEOUT1 { |
7eec1266 KK |
181 | regulator-name = "ESAFEOUT1"; |
182 | }; | |
26ee29a6 | 183 | esafeout2_reg: ESAFEOUT2 { |
7eec1266 KK |
184 | regulator-name = "ESAFEOUT2"; |
185 | }; | |
26ee29a6 | 186 | charger_reg: CHARGER { |
7eec1266 KK |
187 | regulator-name = "CHARGER"; |
188 | regulator-min-microamp = <60000>; | |
189 | regulator-max-microamp = <2580000>; | |
190 | }; | |
191 | }; | |
d9c68089 JK |
192 | |
193 | max77693_haptic { | |
194 | compatible = "maxim,max77693-haptic"; | |
195 | haptic-supply = <&ldo26_reg>; | |
196 | pwms = <&pwm 0 38022 0>; | |
197 | }; | |
043ef148 KK |
198 | |
199 | charger { | |
200 | compatible = "maxim,max77693-charger"; | |
201 | ||
202 | maxim,constant-microvolt = <4350000>; | |
203 | maxim,min-system-microvolt = <3600000>; | |
204 | maxim,thermal-regulation-celsius = <100>; | |
205 | maxim,battery-overcurrent-microamp = <3500000>; | |
206 | maxim,charge-input-threshold-microvolt = <4300000>; | |
207 | }; | |
7eec1266 KK |
208 | }; |
209 | }; | |
210 | ||
e8614292 KK |
211 | i2c_max77693_fuel: i2c-gpio-3 { |
212 | compatible = "i2c-gpio"; | |
213 | gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; | |
214 | i2c-gpio,delay-us = <2>; | |
215 | #address-cells = <1>; | |
216 | #size-cells = <0>; | |
217 | status = "okay"; | |
218 | ||
219 | max77693-fuel-gauge@36 { | |
220 | compatible = "maxim,max17047"; | |
221 | interrupt-parent = <&gpx2>; | |
222 | interrupts = <3 IRQ_TYPE_EDGE_FALLING>; | |
223 | reg = <0x36>; | |
82449f23 KK |
224 | |
225 | maxim,over-heat-temp = <700>; | |
226 | maxim,over-volt = <4500>; | |
7eec1266 KK |
227 | }; |
228 | }; | |
229 | ||
9f1eaef2 JA |
230 | i2c_ak8975: i2c-gpio-0 { |
231 | compatible = "i2c-gpio"; | |
c10d3290 | 232 | gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; |
9f1eaef2 JA |
233 | i2c-gpio,delay-us = <2>; |
234 | #address-cells = <1>; | |
235 | #size-cells = <0>; | |
236 | status = "okay"; | |
237 | ||
8dccafaa | 238 | ak8975@c { |
30cc798b | 239 | compatible = "asahi-kasei,ak8975"; |
9f1eaef2 | 240 | reg = <0x0c>; |
c10d3290 | 241 | gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; |
9f1eaef2 JA |
242 | }; |
243 | }; | |
b4fec647 | 244 | |
85cb4e0b BS |
245 | i2c_cm36651: i2c-gpio-2 { |
246 | compatible = "i2c-gpio"; | |
c10d3290 | 247 | gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; |
85cb4e0b BS |
248 | i2c-gpio,delay-us = <2>; |
249 | #address-cells = <1>; | |
250 | #size-cells = <0>; | |
251 | ||
252 | cm36651@18 { | |
253 | compatible = "capella,cm36651"; | |
254 | reg = <0x18>; | |
255 | interrupt-parent = <&gpx0>; | |
6ff0b90d | 256 | interrupts = <2 IRQ_TYPE_EDGE_FALLING>; |
85cb4e0b BS |
257 | vled-supply = <&ps_als_reg>; |
258 | }; | |
259 | }; | |
260 | ||
5fb9ae88 MP |
261 | i2c-mhl { |
262 | compatible = "i2c-gpio"; | |
263 | gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; | |
264 | i2c-gpio,delay-us = <100>; | |
265 | #address-cells = <1>; | |
266 | #size-cells = <0>; | |
267 | ||
268 | pinctrl-0 = <&i2c_mhl_bus>; | |
269 | pinctrl-names = "default"; | |
270 | status = "okay"; | |
271 | ||
272 | sii9234: hdmi-bridge@39 { | |
273 | compatible = "sil,sii9234"; | |
274 | avcc33-supply = <&vcc33mhl>; | |
275 | iovcc18-supply = <&vcc18mhl>; | |
276 | avcc12-supply = <&vsil12>; | |
277 | cvcc12-supply = <&vsil12>; | |
278 | reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; | |
279 | interrupt-parent = <&gpf3>; | |
280 | interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; | |
281 | reg = <0x39>; | |
282 | ||
283 | port { | |
284 | mhl_to_hdmi: endpoint { | |
285 | remote-endpoint = <&hdmi_to_mhl>; | |
286 | }; | |
287 | }; | |
288 | }; | |
289 | }; | |
290 | ||
4cb37864 SN |
291 | camera: camera { |
292 | pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; | |
b4fec647 SN |
293 | pinctrl-names = "default"; |
294 | status = "okay"; | |
0357a443 SN |
295 | assigned-clocks = <&clock CLK_MOUT_CAM0>, |
296 | <&clock CLK_MOUT_CAM1>; | |
cfe3b893 SN |
297 | assigned-clock-parents = <&clock CLK_XUSBXTI>, |
298 | <&clock CLK_XUSBXTI>; | |
b4fec647 | 299 | |
b4fec647 | 300 | |
440e5aef IS |
301 | }; |
302 | ||
303 | sound { | |
304 | compatible = "samsung,trats2-audio"; | |
305 | samsung,i2s-controller = <&i2s0>; | |
306 | samsung,model = "Trats2"; | |
307 | samsung,audio-codec = <&wm1811>; | |
308 | samsung,audio-routing = | |
309 | "SPK", "SPKOUTLN", | |
310 | "SPK", "SPKOUTLP", | |
311 | "SPK", "SPKOUTRN", | |
312 | "SPK", "SPKOUTRP"; | |
313 | }; | |
314 | ||
26ee29a6 | 315 | thermistor-ap { |
dd9ad468 | 316 | compatible = "murata,ncp15wb473"; |
4f423788 CC |
317 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ |
318 | pullup-ohm = <100000>; /* 100K */ | |
319 | pulldown-ohm = <100000>; /* 100K */ | |
320 | io-channels = <&adc 1>; /* AP temperature */ | |
321 | }; | |
322 | ||
26ee29a6 | 323 | thermistor-battery { |
dd9ad468 | 324 | compatible = "murata,ncp15wb473"; |
4f423788 CC |
325 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ |
326 | pullup-ohm = <100000>; /* 100K */ | |
327 | pulldown-ohm = <100000>; /* 100K */ | |
328 | io-channels = <&adc 2>; /* Battery temperature */ | |
329 | }; | |
bf4a0bed LM |
330 | |
331 | thermal-zones { | |
332 | cpu_thermal: cpu-thermal { | |
333 | cooling-maps { | |
334 | map0 { | |
335 | /* Corresponds to 800MHz at freq_table */ | |
336 | cooling-device = <&cpu0 7 7>; | |
337 | }; | |
338 | map1 { | |
339 | /* Corresponds to 200MHz at freq_table */ | |
340 | cooling-device = <&cpu0 13 13>; | |
341 | }; | |
342 | }; | |
343 | }; | |
344 | }; | |
15dfdfad | 345 | }; |
09918a98 | 346 | |
1fe9a942 KK |
347 | &adc { |
348 | vdd-supply = <&ldo3_reg>; | |
349 | status = "okay"; | |
350 | }; | |
351 | ||
4f20aa0e CC |
352 | &bus_dmc { |
353 | devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; | |
354 | vdd-supply = <&buck1_reg>; | |
355 | status = "okay"; | |
356 | }; | |
357 | ||
358 | &bus_acp { | |
359 | devfreq = <&bus_dmc>; | |
360 | status = "okay"; | |
361 | }; | |
362 | ||
363 | &bus_c2c { | |
364 | devfreq = <&bus_dmc>; | |
365 | status = "okay"; | |
366 | }; | |
367 | ||
368 | &bus_leftbus { | |
369 | devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; | |
370 | vdd-supply = <&buck3_reg>; | |
371 | status = "okay"; | |
372 | }; | |
373 | ||
374 | &bus_rightbus { | |
375 | devfreq = <&bus_leftbus>; | |
376 | status = "okay"; | |
377 | }; | |
378 | ||
379 | &bus_display { | |
380 | devfreq = <&bus_leftbus>; | |
381 | status = "okay"; | |
382 | }; | |
383 | ||
384 | &bus_fsys { | |
385 | devfreq = <&bus_leftbus>; | |
386 | status = "okay"; | |
387 | }; | |
388 | ||
389 | &bus_peri { | |
390 | devfreq = <&bus_leftbus>; | |
391 | status = "okay"; | |
392 | }; | |
393 | ||
394 | &bus_mfc { | |
395 | devfreq = <&bus_leftbus>; | |
396 | status = "okay"; | |
397 | }; | |
398 | ||
f4499741 BZ |
399 | &cpu0 { |
400 | cpu0-supply = <&buck2_reg>; | |
401 | }; | |
402 | ||
1fe9a942 KK |
403 | &csis_0 { |
404 | status = "okay"; | |
405 | vddcore-supply = <&ldo8_reg>; | |
406 | vddio-supply = <&ldo10_reg>; | |
407 | assigned-clocks = <&clock CLK_MOUT_CSIS0>, | |
408 | <&clock CLK_SCLK_CSIS0>; | |
409 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
410 | assigned-clock-rates = <0>, <176000000>; | |
411 | ||
412 | /* Camera C (3) MIPI CSI-2 (CSIS0) */ | |
413 | port@3 { | |
414 | reg = <3>; | |
415 | csis0_ep: endpoint { | |
416 | remote-endpoint = <&s5c73m3_ep>; | |
417 | data-lanes = <1 2 3 4>; | |
418 | samsung,csis-hs-settle = <12>; | |
419 | }; | |
420 | }; | |
421 | }; | |
422 | ||
423 | &csis_1 { | |
424 | status = "okay"; | |
425 | vddcore-supply = <&ldo8_reg>; | |
426 | vddio-supply = <&ldo10_reg>; | |
427 | assigned-clocks = <&clock CLK_MOUT_CSIS1>, | |
428 | <&clock CLK_SCLK_CSIS1>; | |
429 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
430 | assigned-clock-rates = <0>, <176000000>; | |
431 | ||
432 | /* Camera D (4) MIPI CSI-2 (CSIS1) */ | |
433 | port@4 { | |
434 | reg = <4>; | |
435 | csis1_ep: endpoint { | |
436 | remote-endpoint = <&is_s5k6a3_ep>; | |
437 | data-lanes = <1>; | |
438 | samsung,csis-hs-settle = <18>; | |
439 | samsung,csis-wclk; | |
440 | }; | |
441 | }; | |
442 | }; | |
443 | ||
444 | &dsi_0 { | |
445 | vddcore-supply = <&ldo8_reg>; | |
446 | vddio-supply = <&ldo10_reg>; | |
4c74ea4e HK |
447 | samsung,burst-clock-frequency = <500000000>; |
448 | samsung,esc-clock-frequency = <20000000>; | |
1fe9a942 KK |
449 | samsung,pll-clock-frequency = <24000000>; |
450 | status = "okay"; | |
451 | ||
1fe9a942 KK |
452 | panel@0 { |
453 | compatible = "samsung,s6e8aa0"; | |
454 | reg = <0>; | |
455 | vdd3-supply = <&lcd_vdd3_reg>; | |
456 | vci-supply = <&ldo25_reg>; | |
c10d3290 | 457 | reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; |
1fe9a942 KK |
458 | power-on-delay= <50>; |
459 | reset-delay = <100>; | |
460 | init-delay = <100>; | |
461 | flip-horizontal; | |
462 | flip-vertical; | |
463 | panel-width-mm = <58>; | |
464 | panel-height-mm = <103>; | |
465 | ||
466 | display-timings { | |
467 | timing-0 { | |
468 | clock-frequency = <57153600>; | |
469 | hactive = <720>; | |
470 | vactive = <1280>; | |
471 | hfront-porch = <5>; | |
472 | hback-porch = <5>; | |
473 | hsync-len = <5>; | |
474 | vfront-porch = <13>; | |
475 | vback-porch = <1>; | |
476 | vsync-len = <2>; | |
477 | }; | |
478 | }; | |
1fe9a942 KK |
479 | }; |
480 | }; | |
481 | ||
482 | &exynos_usbphy { | |
4ae9a4c6 | 483 | vbus-supply = <&esafeout1_reg>; |
1fe9a942 KK |
484 | status = "okay"; |
485 | }; | |
486 | ||
487 | &fimc_0 { | |
488 | status = "okay"; | |
489 | assigned-clocks = <&clock CLK_MOUT_FIMC0>, | |
490 | <&clock CLK_SCLK_FIMC0>; | |
491 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
492 | assigned-clock-rates = <0>, <176000000>; | |
493 | }; | |
494 | ||
495 | &fimc_1 { | |
496 | status = "okay"; | |
497 | assigned-clocks = <&clock CLK_MOUT_FIMC1>, | |
498 | <&clock CLK_SCLK_FIMC1>; | |
499 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
500 | assigned-clock-rates = <0>, <176000000>; | |
501 | }; | |
502 | ||
503 | &fimc_2 { | |
504 | status = "okay"; | |
505 | assigned-clocks = <&clock CLK_MOUT_FIMC2>, | |
506 | <&clock CLK_SCLK_FIMC2>; | |
507 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
508 | assigned-clock-rates = <0>, <176000000>; | |
509 | }; | |
510 | ||
511 | &fimc_3 { | |
512 | status = "okay"; | |
513 | assigned-clocks = <&clock CLK_MOUT_FIMC3>, | |
514 | <&clock CLK_SCLK_FIMC3>; | |
515 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
516 | assigned-clock-rates = <0>, <176000000>; | |
517 | }; | |
518 | ||
519 | &fimc_is { | |
520 | pinctrl-0 = <&fimc_is_uart>; | |
521 | pinctrl-names = "default"; | |
522 | status = "okay"; | |
523 | ||
524 | i2c1_isp: i2c-isp@12140000 { | |
525 | pinctrl-0 = <&fimc_is_i2c1>; | |
526 | pinctrl-names = "default"; | |
527 | ||
528 | s5k6a3@10 { | |
529 | compatible = "samsung,s5k6a3"; | |
530 | reg = <0x10>; | |
531 | svdda-supply = <&cam_io_reg>; | |
532 | svddio-supply = <&ldo19_reg>; | |
533 | afvdd-supply = <&ldo19_reg>; | |
534 | clock-frequency = <24000000>; | |
535 | /* CAM_B_CLKOUT */ | |
536 | clocks = <&camera 1>; | |
537 | clock-names = "extclk"; | |
538 | samsung,camclk-out = <1>; | |
c10d3290 | 539 | gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; |
1fe9a942 KK |
540 | |
541 | port { | |
542 | is_s5k6a3_ep: endpoint { | |
543 | remote-endpoint = <&csis1_ep>; | |
544 | data-lanes = <1>; | |
545 | }; | |
546 | }; | |
547 | }; | |
548 | }; | |
549 | }; | |
550 | ||
551 | &fimc_lite_0 { | |
552 | status = "okay"; | |
553 | }; | |
554 | ||
555 | &fimc_lite_1 { | |
556 | status = "okay"; | |
557 | }; | |
558 | ||
559 | &fimd { | |
560 | status = "okay"; | |
561 | }; | |
562 | ||
5fb9ae88 MP |
563 | &hdmi { |
564 | hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; | |
565 | pinctrl-names = "default"; | |
566 | pinctrl-0 = <&hdmi_hpd>; | |
567 | vdd-supply = <&ldo3_reg>; | |
568 | vdd_osc-supply = <&ldo4_reg>; | |
569 | vdd_pll-supply = <&ldo3_reg>; | |
570 | ddc = <&i2c_5>; | |
571 | status = "okay"; | |
572 | ||
573 | ports { | |
574 | #address-cells = <1>; | |
575 | #size-cells = <0>; | |
576 | ||
577 | port@1 { | |
578 | reg = <1>; | |
579 | hdmi_to_mhl: endpoint { | |
580 | remote-endpoint = <&mhl_to_hdmi>; | |
581 | }; | |
582 | }; | |
583 | }; | |
584 | }; | |
585 | ||
1fe9a942 KK |
586 | &hsotg { |
587 | vusb_d-supply = <&ldo15_reg>; | |
588 | vusb_a-supply = <&ldo12_reg>; | |
589 | dr_mode = "peripheral"; | |
590 | status = "okay"; | |
591 | }; | |
592 | ||
593 | &i2c_0 { | |
594 | samsung,i2c-sda-delay = <100>; | |
595 | samsung,i2c-slave-addr = <0x10>; | |
596 | samsung,i2c-max-bus-freq = <400000>; | |
597 | pinctrl-0 = <&i2c0_bus>; | |
598 | pinctrl-names = "default"; | |
599 | status = "okay"; | |
600 | ||
601 | s5c73m3@3c { | |
602 | compatible = "samsung,s5c73m3"; | |
603 | reg = <0x3c>; | |
c10d3290 JMC |
604 | standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ |
605 | xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ | |
1fe9a942 KK |
606 | vdd-int-supply = <&buck9_reg>; |
607 | vddio-cis-supply = <&ldo9_reg>; | |
608 | vdda-supply = <&ldo17_reg>; | |
609 | vddio-host-supply = <&ldo18_reg>; | |
610 | vdd-af-supply = <&cam_af_reg>; | |
611 | vdd-reg-supply = <&cam_io_reg>; | |
612 | clock-frequency = <24000000>; | |
613 | /* CAM_A_CLKOUT */ | |
614 | clocks = <&camera 0>; | |
615 | clock-names = "cis_extclk"; | |
616 | port { | |
617 | s5c73m3_ep: endpoint { | |
618 | remote-endpoint = <&csis0_ep>; | |
619 | data-lanes = <1 2 3 4>; | |
620 | }; | |
621 | }; | |
622 | }; | |
623 | }; | |
624 | ||
625 | &i2c_3 { | |
626 | samsung,i2c-sda-delay = <100>; | |
627 | samsung,i2c-slave-addr = <0x10>; | |
628 | samsung,i2c-max-bus-freq = <400000>; | |
629 | pinctrl-0 = <&i2c3_bus>; | |
630 | pinctrl-names = "default"; | |
631 | status = "okay"; | |
632 | ||
633 | mms114-touchscreen@48 { | |
634 | compatible = "melfas,mms114"; | |
635 | reg = <0x48>; | |
636 | interrupt-parent = <&gpm2>; | |
6ff0b90d | 637 | interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
1fe9a942 KK |
638 | x-size = <720>; |
639 | y-size = <1280>; | |
640 | avdd-supply = <&ldo23_reg>; | |
641 | vdd-supply = <&ldo24_reg>; | |
642 | }; | |
643 | }; | |
644 | ||
645 | &i2c_4 { | |
646 | samsung,i2c-sda-delay = <100>; | |
647 | samsung,i2c-slave-addr = <0x10>; | |
648 | samsung,i2c-max-bus-freq = <100000>; | |
649 | pinctrl-0 = <&i2c4_bus>; | |
650 | pinctrl-names = "default"; | |
651 | status = "okay"; | |
652 | ||
653 | wm1811: wm1811@1a { | |
654 | compatible = "wlf,wm1811"; | |
655 | reg = <0x1a>; | |
656 | clocks = <&pmu_system_controller 0>; | |
657 | clock-names = "MCLK1"; | |
658 | DCVDD-supply = <&ldo3_reg>; | |
659 | DBVDD1-supply = <&ldo3_reg>; | |
660 | wlf,ldo1ena = <&gpj0 4 0>; | |
661 | }; | |
662 | }; | |
663 | ||
5fb9ae88 MP |
664 | &i2c_5 { |
665 | status = "okay"; | |
666 | }; | |
667 | ||
1fe9a942 KK |
668 | &i2c_7 { |
669 | samsung,i2c-sda-delay = <100>; | |
670 | samsung,i2c-slave-addr = <0x10>; | |
671 | samsung,i2c-max-bus-freq = <100000>; | |
672 | pinctrl-0 = <&i2c7_bus>; | |
673 | pinctrl-names = "default"; | |
674 | status = "okay"; | |
675 | ||
8dccafaa | 676 | max77686: max77686_pmic@9 { |
1fe9a942 KK |
677 | compatible = "maxim,max77686"; |
678 | interrupt-parent = <&gpx0>; | |
6ff0b90d | 679 | interrupts = <7 IRQ_TYPE_NONE>; |
1fe9a942 KK |
680 | reg = <0x09>; |
681 | #clock-cells = <1>; | |
682 | ||
683 | voltage-regulators { | |
c21dbcfe | 684 | ldo1_reg: LDO1 { |
1fe9a942 KK |
685 | regulator-name = "VALIVE_1.0V_AP"; |
686 | regulator-min-microvolt = <1000000>; | |
687 | regulator-max-microvolt = <1000000>; | |
688 | regulator-always-on; | |
689 | }; | |
690 | ||
c21dbcfe | 691 | ldo2_reg: LDO2 { |
1fe9a942 KK |
692 | regulator-name = "VM1M2_1.2V_AP"; |
693 | regulator-min-microvolt = <1200000>; | |
694 | regulator-max-microvolt = <1200000>; | |
695 | regulator-always-on; | |
696 | regulator-state-mem { | |
697 | regulator-on-in-suspend; | |
698 | }; | |
699 | }; | |
700 | ||
c21dbcfe | 701 | ldo3_reg: LDO3 { |
1fe9a942 KK |
702 | regulator-name = "VCC_1.8V_AP"; |
703 | regulator-min-microvolt = <1800000>; | |
704 | regulator-max-microvolt = <1800000>; | |
705 | regulator-always-on; | |
706 | }; | |
707 | ||
c21dbcfe | 708 | ldo4_reg: LDO4 { |
1fe9a942 KK |
709 | regulator-name = "VCC_2.8V_AP"; |
710 | regulator-min-microvolt = <2800000>; | |
711 | regulator-max-microvolt = <2800000>; | |
712 | regulator-always-on; | |
713 | }; | |
714 | ||
c21dbcfe | 715 | ldo5_reg: LDO5 { |
1fe9a942 KK |
716 | regulator-name = "VCC_1.8V_IO"; |
717 | regulator-min-microvolt = <1800000>; | |
718 | regulator-max-microvolt = <1800000>; | |
719 | regulator-always-on; | |
720 | }; | |
721 | ||
c21dbcfe | 722 | ldo6_reg: LDO6 { |
1fe9a942 KK |
723 | regulator-name = "VMPLL_1.0V_AP"; |
724 | regulator-min-microvolt = <1000000>; | |
725 | regulator-max-microvolt = <1000000>; | |
726 | regulator-always-on; | |
727 | regulator-state-mem { | |
728 | regulator-on-in-suspend; | |
729 | }; | |
730 | }; | |
731 | ||
c21dbcfe | 732 | ldo7_reg: LDO7 { |
1fe9a942 KK |
733 | regulator-name = "VPLL_1.0V_AP"; |
734 | regulator-min-microvolt = <1000000>; | |
735 | regulator-max-microvolt = <1000000>; | |
736 | regulator-always-on; | |
737 | regulator-state-mem { | |
738 | regulator-on-in-suspend; | |
739 | }; | |
740 | }; | |
741 | ||
c21dbcfe | 742 | ldo8_reg: LDO8 { |
1fe9a942 KK |
743 | regulator-name = "VMIPI_1.0V"; |
744 | regulator-min-microvolt = <1000000>; | |
745 | regulator-max-microvolt = <1000000>; | |
746 | regulator-state-mem { | |
747 | regulator-off-in-suspend; | |
748 | }; | |
749 | }; | |
750 | ||
c21dbcfe | 751 | ldo9_reg: LDO9 { |
1fe9a942 KK |
752 | regulator-name = "CAM_ISP_MIPI_1.2V"; |
753 | regulator-min-microvolt = <1200000>; | |
754 | regulator-max-microvolt = <1200000>; | |
755 | }; | |
756 | ||
c21dbcfe | 757 | ldo10_reg: LDO10 { |
1fe9a942 KK |
758 | regulator-name = "VMIPI_1.8V"; |
759 | regulator-min-microvolt = <1800000>; | |
760 | regulator-max-microvolt = <1800000>; | |
761 | regulator-state-mem { | |
762 | regulator-off-in-suspend; | |
763 | }; | |
764 | }; | |
765 | ||
c21dbcfe | 766 | ldo11_reg: LDO11 { |
1fe9a942 KK |
767 | regulator-name = "VABB1_1.95V"; |
768 | regulator-min-microvolt = <1950000>; | |
769 | regulator-max-microvolt = <1950000>; | |
770 | regulator-always-on; | |
771 | regulator-state-mem { | |
772 | regulator-off-in-suspend; | |
773 | }; | |
774 | }; | |
775 | ||
c21dbcfe | 776 | ldo12_reg: LDO12 { |
1fe9a942 KK |
777 | regulator-name = "VUOTG_3.0V"; |
778 | regulator-min-microvolt = <3000000>; | |
779 | regulator-max-microvolt = <3000000>; | |
780 | regulator-state-mem { | |
781 | regulator-off-in-suspend; | |
782 | }; | |
783 | }; | |
784 | ||
c21dbcfe | 785 | ldo13_reg: LDO13 { |
1fe9a942 KK |
786 | regulator-name = "NFC_AVDD_1.8V"; |
787 | regulator-min-microvolt = <1800000>; | |
788 | regulator-max-microvolt = <1800000>; | |
789 | }; | |
790 | ||
c21dbcfe | 791 | ldo14_reg: LDO14 { |
1fe9a942 KK |
792 | regulator-name = "VABB2_1.95V"; |
793 | regulator-min-microvolt = <1950000>; | |
794 | regulator-max-microvolt = <1950000>; | |
795 | regulator-always-on; | |
796 | regulator-state-mem { | |
797 | regulator-off-in-suspend; | |
798 | }; | |
799 | }; | |
800 | ||
c21dbcfe | 801 | ldo15_reg: LDO15 { |
1fe9a942 KK |
802 | regulator-name = "VHSIC_1.0V"; |
803 | regulator-min-microvolt = <1000000>; | |
804 | regulator-max-microvolt = <1000000>; | |
805 | regulator-state-mem { | |
806 | regulator-on-in-suspend; | |
807 | }; | |
808 | }; | |
809 | ||
c21dbcfe | 810 | ldo16_reg: LDO16 { |
1fe9a942 KK |
811 | regulator-name = "VHSIC_1.8V"; |
812 | regulator-min-microvolt = <1800000>; | |
813 | regulator-max-microvolt = <1800000>; | |
814 | regulator-state-mem { | |
815 | regulator-on-in-suspend; | |
816 | }; | |
817 | }; | |
818 | ||
c21dbcfe | 819 | ldo17_reg: LDO17 { |
1fe9a942 KK |
820 | regulator-name = "CAM_SENSOR_CORE_1.2V"; |
821 | regulator-min-microvolt = <1200000>; | |
822 | regulator-max-microvolt = <1200000>; | |
823 | }; | |
824 | ||
c21dbcfe | 825 | ldo18_reg: LDO18 { |
1fe9a942 KK |
826 | regulator-name = "CAM_ISP_SEN_IO_1.8V"; |
827 | regulator-min-microvolt = <1800000>; | |
828 | regulator-max-microvolt = <1800000>; | |
829 | }; | |
830 | ||
c21dbcfe | 831 | ldo19_reg: LDO19 { |
1fe9a942 KK |
832 | regulator-name = "VT_CAM_1.8V"; |
833 | regulator-min-microvolt = <1800000>; | |
834 | regulator-max-microvolt = <1800000>; | |
835 | }; | |
836 | ||
c21dbcfe | 837 | ldo20_reg: LDO20 { |
1fe9a942 KK |
838 | regulator-name = "VDDQ_PRE_1.8V"; |
839 | regulator-min-microvolt = <1800000>; | |
840 | regulator-max-microvolt = <1800000>; | |
841 | }; | |
842 | ||
c21dbcfe | 843 | ldo21_reg: LDO21 { |
1fe9a942 KK |
844 | regulator-name = "VTF_2.8V"; |
845 | regulator-min-microvolt = <2800000>; | |
846 | regulator-max-microvolt = <2800000>; | |
847 | maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; | |
848 | }; | |
849 | ||
c21dbcfe | 850 | ldo22_reg: LDO22 { |
1fe9a942 KK |
851 | regulator-name = "VMEM_VDD_2.8V"; |
852 | regulator-min-microvolt = <2800000>; | |
853 | regulator-max-microvolt = <2800000>; | |
854 | maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; | |
855 | }; | |
856 | ||
c21dbcfe | 857 | ldo23_reg: LDO23 { |
1fe9a942 KK |
858 | regulator-name = "TSP_AVDD_3.3V"; |
859 | regulator-min-microvolt = <3300000>; | |
860 | regulator-max-microvolt = <3300000>; | |
861 | }; | |
862 | ||
c21dbcfe | 863 | ldo24_reg: LDO24 { |
1fe9a942 KK |
864 | regulator-name = "TSP_VDD_1.8V"; |
865 | regulator-min-microvolt = <1800000>; | |
866 | regulator-max-microvolt = <1800000>; | |
867 | }; | |
868 | ||
c21dbcfe | 869 | ldo25_reg: LDO25 { |
1fe9a942 KK |
870 | regulator-name = "LCD_VCC_3.3V"; |
871 | regulator-min-microvolt = <2800000>; | |
872 | regulator-max-microvolt = <2800000>; | |
873 | }; | |
874 | ||
c21dbcfe | 875 | ldo26_reg: LDO26 { |
1fe9a942 KK |
876 | regulator-name = "MOTOR_VCC_3.0V"; |
877 | regulator-min-microvolt = <3000000>; | |
878 | regulator-max-microvolt = <3000000>; | |
879 | }; | |
880 | ||
c21dbcfe | 881 | buck1_reg: BUCK1 { |
1fe9a942 KK |
882 | regulator-name = "vdd_mif"; |
883 | regulator-min-microvolt = <850000>; | |
884 | regulator-max-microvolt = <1100000>; | |
885 | regulator-always-on; | |
886 | regulator-boot-on; | |
887 | regulator-state-mem { | |
888 | regulator-off-in-suspend; | |
889 | }; | |
890 | }; | |
891 | ||
c21dbcfe | 892 | buck2_reg: BUCK2 { |
1fe9a942 KK |
893 | regulator-name = "vdd_arm"; |
894 | regulator-min-microvolt = <850000>; | |
895 | regulator-max-microvolt = <1500000>; | |
896 | regulator-always-on; | |
897 | regulator-boot-on; | |
898 | regulator-state-mem { | |
899 | regulator-on-in-suspend; | |
900 | }; | |
901 | }; | |
902 | ||
c21dbcfe | 903 | buck3_reg: BUCK3 { |
1fe9a942 KK |
904 | regulator-name = "vdd_int"; |
905 | regulator-min-microvolt = <850000>; | |
906 | regulator-max-microvolt = <1150000>; | |
907 | regulator-always-on; | |
908 | regulator-boot-on; | |
909 | regulator-state-mem { | |
910 | regulator-off-in-suspend; | |
911 | }; | |
912 | }; | |
913 | ||
c21dbcfe | 914 | buck4_reg: BUCK4 { |
1fe9a942 KK |
915 | regulator-name = "vdd_g3d"; |
916 | regulator-min-microvolt = <850000>; | |
917 | regulator-max-microvolt = <1150000>; | |
918 | regulator-boot-on; | |
919 | regulator-state-mem { | |
920 | regulator-off-in-suspend; | |
921 | }; | |
922 | }; | |
923 | ||
c21dbcfe | 924 | buck5_reg: BUCK5 { |
1fe9a942 KK |
925 | regulator-name = "VMEM_1.2V_AP"; |
926 | regulator-min-microvolt = <1200000>; | |
927 | regulator-max-microvolt = <1200000>; | |
928 | regulator-always-on; | |
929 | }; | |
930 | ||
c21dbcfe | 931 | buck6_reg: BUCK6 { |
1fe9a942 KK |
932 | regulator-name = "VCC_SUB_1.35V"; |
933 | regulator-min-microvolt = <1350000>; | |
934 | regulator-max-microvolt = <1350000>; | |
935 | regulator-always-on; | |
936 | }; | |
937 | ||
c21dbcfe | 938 | buck7_reg: BUCK7 { |
1fe9a942 KK |
939 | regulator-name = "VCC_SUB_2.0V"; |
940 | regulator-min-microvolt = <2000000>; | |
941 | regulator-max-microvolt = <2000000>; | |
942 | regulator-always-on; | |
943 | }; | |
944 | ||
c21dbcfe | 945 | buck8_reg: BUCK8 { |
1fe9a942 KK |
946 | regulator-name = "VMEM_VDDF_3.0V"; |
947 | regulator-min-microvolt = <2850000>; | |
948 | regulator-max-microvolt = <2850000>; | |
949 | maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; | |
950 | }; | |
951 | ||
c21dbcfe | 952 | buck9_reg: BUCK9 { |
1fe9a942 KK |
953 | regulator-name = "CAM_ISP_CORE_1.2V"; |
954 | regulator-min-microvolt = <1000000>; | |
955 | regulator-max-microvolt = <1200000>; | |
956 | maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; | |
957 | }; | |
958 | }; | |
959 | }; | |
960 | }; | |
961 | ||
5fb9ae88 MP |
962 | &i2c_8 { |
963 | status = "okay"; | |
964 | }; | |
965 | ||
1fe9a942 KK |
966 | &i2s0 { |
967 | pinctrl-0 = <&i2s0_bus>; | |
968 | pinctrl-names = "default"; | |
969 | status = "okay"; | |
970 | }; | |
971 | ||
5fb9ae88 MP |
972 | &mixer { |
973 | status = "okay"; | |
974 | }; | |
975 | ||
1fe9a942 | 976 | &mshc_0 { |
1fe9a942 KK |
977 | broken-cd; |
978 | non-removable; | |
979 | card-detect-delay = <200>; | |
980 | vmmc-supply = <&ldo22_reg>; | |
981 | clock-frequency = <400000000>; | |
982 | samsung,dw-mshc-ciu-div = <0>; | |
983 | samsung,dw-mshc-sdr-timing = <2 3>; | |
984 | samsung,dw-mshc-ddr-timing = <1 2>; | |
985 | pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; | |
986 | pinctrl-names = "default"; | |
987 | status = "okay"; | |
988 | bus-width = <8>; | |
989 | cap-mmc-highspeed; | |
990 | }; | |
991 | ||
440e5aef IS |
992 | &pmu_system_controller { |
993 | assigned-clocks = <&pmu_system_controller 0>; | |
994 | assigned-clock-parents = <&clock CLK_XUSBXTI>; | |
995 | }; | |
996 | ||
09918a98 TF |
997 | &pinctrl_0 { |
998 | pinctrl-names = "default"; | |
999 | pinctrl-0 = <&sleep0>; | |
1000 | ||
5fb9ae88 MP |
1001 | mhl_int: mhl-int { |
1002 | samsung,pins = "gpf3-5"; | |
1003 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
1004 | }; | |
1005 | ||
1006 | i2c_mhl_bus: i2c-mhl-bus { | |
1007 | samsung,pins = "gpf0-4", "gpf0-6"; | |
1008 | samsung,pin-function = <EXYNOS_PIN_FUNC_2>; | |
1009 | samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; | |
1010 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
1011 | }; | |
1012 | ||
09918a98 TF |
1013 | sleep0: sleep-states { |
1014 | PIN_SLP(gpa0-0, INPUT, NONE); | |
1015 | PIN_SLP(gpa0-1, OUT0, NONE); | |
1016 | PIN_SLP(gpa0-2, INPUT, NONE); | |
1017 | PIN_SLP(gpa0-3, INPUT, UP); | |
1018 | PIN_SLP(gpa0-4, INPUT, NONE); | |
1019 | PIN_SLP(gpa0-5, INPUT, DOWN); | |
1020 | PIN_SLP(gpa0-6, INPUT, DOWN); | |
1021 | PIN_SLP(gpa0-7, INPUT, UP); | |
1022 | ||
1023 | PIN_SLP(gpa1-0, INPUT, DOWN); | |
1024 | PIN_SLP(gpa1-1, INPUT, DOWN); | |
1025 | PIN_SLP(gpa1-2, INPUT, DOWN); | |
1026 | PIN_SLP(gpa1-3, INPUT, DOWN); | |
1027 | PIN_SLP(gpa1-4, INPUT, DOWN); | |
1028 | PIN_SLP(gpa1-5, INPUT, DOWN); | |
1029 | ||
1030 | PIN_SLP(gpb-0, INPUT, NONE); | |
1031 | PIN_SLP(gpb-1, INPUT, NONE); | |
1032 | PIN_SLP(gpb-2, INPUT, NONE); | |
1033 | PIN_SLP(gpb-3, INPUT, NONE); | |
1034 | PIN_SLP(gpb-4, INPUT, DOWN); | |
1035 | PIN_SLP(gpb-5, INPUT, UP); | |
1036 | PIN_SLP(gpb-6, INPUT, DOWN); | |
1037 | PIN_SLP(gpb-7, INPUT, DOWN); | |
1038 | ||
1039 | PIN_SLP(gpc0-0, INPUT, DOWN); | |
1040 | PIN_SLP(gpc0-1, INPUT, DOWN); | |
1041 | PIN_SLP(gpc0-2, INPUT, DOWN); | |
1042 | PIN_SLP(gpc0-3, INPUT, DOWN); | |
1043 | PIN_SLP(gpc0-4, INPUT, DOWN); | |
1044 | ||
1045 | PIN_SLP(gpc1-0, INPUT, NONE); | |
1046 | PIN_SLP(gpc1-1, PREV, NONE); | |
1047 | PIN_SLP(gpc1-2, INPUT, NONE); | |
1048 | PIN_SLP(gpc1-3, INPUT, NONE); | |
1049 | PIN_SLP(gpc1-4, INPUT, NONE); | |
1050 | ||
1051 | PIN_SLP(gpd0-0, INPUT, DOWN); | |
1052 | PIN_SLP(gpd0-1, INPUT, DOWN); | |
1053 | PIN_SLP(gpd0-2, INPUT, NONE); | |
1054 | PIN_SLP(gpd0-3, INPUT, NONE); | |
1055 | ||
1056 | PIN_SLP(gpd1-0, INPUT, DOWN); | |
1057 | PIN_SLP(gpd1-1, INPUT, DOWN); | |
1058 | PIN_SLP(gpd1-2, INPUT, NONE); | |
1059 | PIN_SLP(gpd1-3, INPUT, NONE); | |
1060 | ||
1061 | PIN_SLP(gpf0-0, INPUT, NONE); | |
1062 | PIN_SLP(gpf0-1, INPUT, NONE); | |
1063 | PIN_SLP(gpf0-2, INPUT, DOWN); | |
1064 | PIN_SLP(gpf0-3, INPUT, DOWN); | |
1065 | PIN_SLP(gpf0-4, INPUT, NONE); | |
1066 | PIN_SLP(gpf0-5, INPUT, DOWN); | |
1067 | PIN_SLP(gpf0-6, INPUT, NONE); | |
1068 | PIN_SLP(gpf0-7, INPUT, DOWN); | |
1069 | ||
1070 | PIN_SLP(gpf1-0, INPUT, DOWN); | |
1071 | PIN_SLP(gpf1-1, INPUT, DOWN); | |
1072 | PIN_SLP(gpf1-2, INPUT, DOWN); | |
1073 | PIN_SLP(gpf1-3, INPUT, DOWN); | |
1074 | PIN_SLP(gpf1-4, INPUT, NONE); | |
1075 | PIN_SLP(gpf1-5, INPUT, NONE); | |
1076 | PIN_SLP(gpf1-6, INPUT, DOWN); | |
1077 | PIN_SLP(gpf1-7, PREV, NONE); | |
1078 | ||
1079 | PIN_SLP(gpf2-0, PREV, NONE); | |
1080 | PIN_SLP(gpf2-1, INPUT, DOWN); | |
1081 | PIN_SLP(gpf2-2, INPUT, DOWN); | |
1082 | PIN_SLP(gpf2-3, INPUT, DOWN); | |
1083 | PIN_SLP(gpf2-4, INPUT, DOWN); | |
1084 | PIN_SLP(gpf2-5, INPUT, DOWN); | |
1085 | PIN_SLP(gpf2-6, INPUT, NONE); | |
1086 | PIN_SLP(gpf2-7, INPUT, NONE); | |
1087 | ||
1088 | PIN_SLP(gpf3-0, INPUT, NONE); | |
1089 | PIN_SLP(gpf3-1, PREV, NONE); | |
1090 | PIN_SLP(gpf3-2, PREV, NONE); | |
1091 | PIN_SLP(gpf3-3, PREV, NONE); | |
1092 | PIN_SLP(gpf3-4, OUT1, NONE); | |
1093 | PIN_SLP(gpf3-5, INPUT, DOWN); | |
1094 | ||
1095 | PIN_SLP(gpj0-0, PREV, NONE); | |
1096 | PIN_SLP(gpj0-1, PREV, NONE); | |
1097 | PIN_SLP(gpj0-2, PREV, NONE); | |
1098 | PIN_SLP(gpj0-3, INPUT, DOWN); | |
1099 | PIN_SLP(gpj0-4, PREV, NONE); | |
1100 | PIN_SLP(gpj0-5, PREV, NONE); | |
1101 | PIN_SLP(gpj0-6, INPUT, DOWN); | |
1102 | PIN_SLP(gpj0-7, INPUT, DOWN); | |
1103 | ||
1104 | PIN_SLP(gpj1-0, INPUT, DOWN); | |
1105 | PIN_SLP(gpj1-1, PREV, NONE); | |
1106 | PIN_SLP(gpj1-2, PREV, NONE); | |
1107 | PIN_SLP(gpj1-3, INPUT, DOWN); | |
1108 | PIN_SLP(gpj1-4, INPUT, DOWN); | |
1109 | }; | |
1110 | }; | |
1111 | ||
1112 | &pinctrl_1 { | |
1113 | pinctrl-names = "default"; | |
1114 | pinctrl-0 = <&sleep1>; | |
1115 | ||
5fb9ae88 MP |
1116 | hdmi_hpd: hdmi-hpd { |
1117 | samsung,pins = "gpx3-7"; | |
1118 | samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; | |
1119 | }; | |
1120 | ||
09918a98 TF |
1121 | sleep1: sleep-states { |
1122 | PIN_SLP(gpk0-0, PREV, NONE); | |
1123 | PIN_SLP(gpk0-1, PREV, NONE); | |
1124 | PIN_SLP(gpk0-2, OUT0, NONE); | |
1125 | PIN_SLP(gpk0-3, PREV, NONE); | |
1126 | PIN_SLP(gpk0-4, PREV, NONE); | |
1127 | PIN_SLP(gpk0-5, PREV, NONE); | |
1128 | PIN_SLP(gpk0-6, PREV, NONE); | |
1129 | ||
1130 | PIN_SLP(gpk1-0, INPUT, DOWN); | |
1131 | PIN_SLP(gpk1-1, INPUT, DOWN); | |
1132 | PIN_SLP(gpk1-2, INPUT, DOWN); | |
1133 | PIN_SLP(gpk1-3, PREV, NONE); | |
1134 | PIN_SLP(gpk1-4, PREV, NONE); | |
1135 | PIN_SLP(gpk1-5, PREV, NONE); | |
1136 | PIN_SLP(gpk1-6, PREV, NONE); | |
1137 | ||
1138 | PIN_SLP(gpk2-0, INPUT, DOWN); | |
1139 | PIN_SLP(gpk2-1, INPUT, DOWN); | |
1140 | PIN_SLP(gpk2-2, INPUT, DOWN); | |
1141 | PIN_SLP(gpk2-3, INPUT, DOWN); | |
1142 | PIN_SLP(gpk2-4, INPUT, DOWN); | |
1143 | PIN_SLP(gpk2-5, INPUT, DOWN); | |
1144 | PIN_SLP(gpk2-6, INPUT, DOWN); | |
1145 | ||
1146 | PIN_SLP(gpk3-0, OUT0, NONE); | |
1147 | PIN_SLP(gpk3-1, INPUT, NONE); | |
1148 | PIN_SLP(gpk3-2, INPUT, DOWN); | |
1149 | PIN_SLP(gpk3-3, INPUT, NONE); | |
1150 | PIN_SLP(gpk3-4, INPUT, NONE); | |
1151 | PIN_SLP(gpk3-5, INPUT, NONE); | |
1152 | PIN_SLP(gpk3-6, INPUT, NONE); | |
1153 | ||
1154 | PIN_SLP(gpl0-0, INPUT, DOWN); | |
1155 | PIN_SLP(gpl0-1, INPUT, DOWN); | |
1156 | PIN_SLP(gpl0-2, INPUT, DOWN); | |
1157 | PIN_SLP(gpl0-3, INPUT, DOWN); | |
1158 | PIN_SLP(gpl0-4, PREV, NONE); | |
1159 | PIN_SLP(gpl0-6, PREV, NONE); | |
1160 | ||
1161 | PIN_SLP(gpl1-0, INPUT, DOWN); | |
1162 | PIN_SLP(gpl1-1, INPUT, DOWN); | |
1163 | PIN_SLP(gpl2-0, INPUT, DOWN); | |
1164 | PIN_SLP(gpl2-1, INPUT, DOWN); | |
1165 | PIN_SLP(gpl2-2, INPUT, DOWN); | |
1166 | PIN_SLP(gpl2-3, INPUT, DOWN); | |
1167 | PIN_SLP(gpl2-4, INPUT, DOWN); | |
1168 | PIN_SLP(gpl2-5, INPUT, DOWN); | |
1169 | PIN_SLP(gpl2-6, PREV, NONE); | |
1170 | PIN_SLP(gpl2-7, INPUT, DOWN); | |
1171 | ||
1172 | PIN_SLP(gpm0-0, INPUT, DOWN); | |
1173 | PIN_SLP(gpm0-1, INPUT, DOWN); | |
1174 | PIN_SLP(gpm0-2, INPUT, DOWN); | |
1175 | PIN_SLP(gpm0-3, INPUT, DOWN); | |
1176 | PIN_SLP(gpm0-4, INPUT, DOWN); | |
1177 | PIN_SLP(gpm0-5, INPUT, DOWN); | |
1178 | PIN_SLP(gpm0-6, INPUT, DOWN); | |
1179 | PIN_SLP(gpm0-7, INPUT, DOWN); | |
1180 | ||
1181 | PIN_SLP(gpm1-0, INPUT, DOWN); | |
1182 | PIN_SLP(gpm1-1, INPUT, DOWN); | |
1183 | PIN_SLP(gpm1-2, INPUT, NONE); | |
1184 | PIN_SLP(gpm1-3, INPUT, NONE); | |
1185 | PIN_SLP(gpm1-4, INPUT, NONE); | |
1186 | PIN_SLP(gpm1-5, INPUT, NONE); | |
1187 | PIN_SLP(gpm1-6, INPUT, DOWN); | |
1188 | ||
1189 | PIN_SLP(gpm2-0, INPUT, NONE); | |
1190 | PIN_SLP(gpm2-1, INPUT, NONE); | |
1191 | PIN_SLP(gpm2-2, INPUT, DOWN); | |
1192 | PIN_SLP(gpm2-3, INPUT, DOWN); | |
1193 | PIN_SLP(gpm2-4, INPUT, DOWN); | |
1194 | ||
1195 | PIN_SLP(gpm3-0, PREV, NONE); | |
1196 | PIN_SLP(gpm3-1, PREV, NONE); | |
1197 | PIN_SLP(gpm3-2, PREV, NONE); | |
1198 | PIN_SLP(gpm3-3, OUT1, NONE); | |
1199 | PIN_SLP(gpm3-4, INPUT, DOWN); | |
1200 | PIN_SLP(gpm3-5, INPUT, DOWN); | |
1201 | PIN_SLP(gpm3-6, INPUT, DOWN); | |
1202 | PIN_SLP(gpm3-7, INPUT, DOWN); | |
1203 | ||
1204 | PIN_SLP(gpm4-0, INPUT, DOWN); | |
1205 | PIN_SLP(gpm4-1, INPUT, DOWN); | |
1206 | PIN_SLP(gpm4-2, INPUT, DOWN); | |
1207 | PIN_SLP(gpm4-3, INPUT, DOWN); | |
1208 | PIN_SLP(gpm4-4, INPUT, DOWN); | |
1209 | PIN_SLP(gpm4-5, INPUT, DOWN); | |
1210 | PIN_SLP(gpm4-6, INPUT, DOWN); | |
1211 | PIN_SLP(gpm4-7, INPUT, DOWN); | |
1212 | ||
1213 | PIN_SLP(gpy0-0, INPUT, DOWN); | |
1214 | PIN_SLP(gpy0-1, INPUT, DOWN); | |
1215 | PIN_SLP(gpy0-2, INPUT, DOWN); | |
1216 | PIN_SLP(gpy0-3, INPUT, DOWN); | |
1217 | PIN_SLP(gpy0-4, INPUT, DOWN); | |
1218 | PIN_SLP(gpy0-5, INPUT, DOWN); | |
1219 | ||
1220 | PIN_SLP(gpy1-0, INPUT, DOWN); | |
1221 | PIN_SLP(gpy1-1, INPUT, DOWN); | |
1222 | PIN_SLP(gpy1-2, INPUT, DOWN); | |
1223 | PIN_SLP(gpy1-3, INPUT, DOWN); | |
1224 | ||
1225 | PIN_SLP(gpy2-0, PREV, NONE); | |
1226 | PIN_SLP(gpy2-1, INPUT, DOWN); | |
1227 | PIN_SLP(gpy2-2, INPUT, NONE); | |
1228 | PIN_SLP(gpy2-3, INPUT, NONE); | |
1229 | PIN_SLP(gpy2-4, INPUT, NONE); | |
1230 | PIN_SLP(gpy2-5, INPUT, NONE); | |
1231 | ||
1232 | PIN_SLP(gpy3-0, INPUT, DOWN); | |
1233 | PIN_SLP(gpy3-1, INPUT, DOWN); | |
1234 | PIN_SLP(gpy3-2, INPUT, DOWN); | |
1235 | PIN_SLP(gpy3-3, INPUT, DOWN); | |
1236 | PIN_SLP(gpy3-4, INPUT, DOWN); | |
1237 | PIN_SLP(gpy3-5, INPUT, DOWN); | |
1238 | PIN_SLP(gpy3-6, INPUT, DOWN); | |
1239 | PIN_SLP(gpy3-7, INPUT, DOWN); | |
1240 | ||
1241 | PIN_SLP(gpy4-0, INPUT, DOWN); | |
1242 | PIN_SLP(gpy4-1, INPUT, DOWN); | |
1243 | PIN_SLP(gpy4-2, INPUT, DOWN); | |
1244 | PIN_SLP(gpy4-3, INPUT, DOWN); | |
1245 | PIN_SLP(gpy4-4, INPUT, DOWN); | |
1246 | PIN_SLP(gpy4-5, INPUT, DOWN); | |
1247 | PIN_SLP(gpy4-6, INPUT, DOWN); | |
1248 | PIN_SLP(gpy4-7, INPUT, DOWN); | |
1249 | ||
1250 | PIN_SLP(gpy5-0, INPUT, DOWN); | |
1251 | PIN_SLP(gpy5-1, INPUT, DOWN); | |
1252 | PIN_SLP(gpy5-2, INPUT, DOWN); | |
1253 | PIN_SLP(gpy5-3, INPUT, DOWN); | |
1254 | PIN_SLP(gpy5-4, INPUT, DOWN); | |
1255 | PIN_SLP(gpy5-5, INPUT, DOWN); | |
1256 | PIN_SLP(gpy5-6, INPUT, DOWN); | |
1257 | PIN_SLP(gpy5-7, INPUT, DOWN); | |
1258 | ||
1259 | PIN_SLP(gpy6-0, INPUT, DOWN); | |
1260 | PIN_SLP(gpy6-1, INPUT, DOWN); | |
1261 | PIN_SLP(gpy6-2, INPUT, DOWN); | |
1262 | PIN_SLP(gpy6-3, INPUT, DOWN); | |
1263 | PIN_SLP(gpy6-4, INPUT, DOWN); | |
1264 | PIN_SLP(gpy6-5, INPUT, DOWN); | |
1265 | PIN_SLP(gpy6-6, INPUT, DOWN); | |
1266 | PIN_SLP(gpy6-7, INPUT, DOWN); | |
1267 | }; | |
1268 | }; | |
1269 | ||
1270 | &pinctrl_2 { | |
1271 | pinctrl-names = "default"; | |
1272 | pinctrl-0 = <&sleep2>; | |
1273 | ||
1274 | sleep2: sleep-states { | |
1275 | PIN_SLP(gpz-0, INPUT, DOWN); | |
1276 | PIN_SLP(gpz-1, INPUT, DOWN); | |
1277 | PIN_SLP(gpz-2, INPUT, DOWN); | |
1278 | PIN_SLP(gpz-3, INPUT, DOWN); | |
1279 | PIN_SLP(gpz-4, INPUT, DOWN); | |
1280 | PIN_SLP(gpz-5, INPUT, DOWN); | |
1281 | PIN_SLP(gpz-6, INPUT, DOWN); | |
1282 | }; | |
1283 | }; | |
1284 | ||
1285 | &pinctrl_3 { | |
1286 | pinctrl-names = "default"; | |
1287 | pinctrl-0 = <&sleep3>; | |
1288 | ||
1289 | sleep3: sleep-states { | |
1290 | PIN_SLP(gpv0-0, INPUT, DOWN); | |
1291 | PIN_SLP(gpv0-1, INPUT, DOWN); | |
1292 | PIN_SLP(gpv0-2, INPUT, DOWN); | |
1293 | PIN_SLP(gpv0-3, INPUT, DOWN); | |
1294 | PIN_SLP(gpv0-4, INPUT, DOWN); | |
1295 | PIN_SLP(gpv0-5, INPUT, DOWN); | |
1296 | PIN_SLP(gpv0-6, INPUT, DOWN); | |
1297 | PIN_SLP(gpv0-7, INPUT, DOWN); | |
1298 | ||
1299 | PIN_SLP(gpv1-0, INPUT, DOWN); | |
1300 | PIN_SLP(gpv1-1, INPUT, DOWN); | |
1301 | PIN_SLP(gpv1-2, INPUT, DOWN); | |
1302 | PIN_SLP(gpv1-3, INPUT, DOWN); | |
1303 | PIN_SLP(gpv1-4, INPUT, DOWN); | |
1304 | PIN_SLP(gpv1-5, INPUT, DOWN); | |
1305 | PIN_SLP(gpv1-6, INPUT, DOWN); | |
1306 | PIN_SLP(gpv1-7, INPUT, DOWN); | |
1307 | ||
1308 | PIN_SLP(gpv2-0, INPUT, DOWN); | |
1309 | PIN_SLP(gpv2-1, INPUT, DOWN); | |
1310 | PIN_SLP(gpv2-2, INPUT, DOWN); | |
1311 | PIN_SLP(gpv2-3, INPUT, DOWN); | |
1312 | PIN_SLP(gpv2-4, INPUT, DOWN); | |
1313 | PIN_SLP(gpv2-5, INPUT, DOWN); | |
1314 | PIN_SLP(gpv2-6, INPUT, DOWN); | |
1315 | PIN_SLP(gpv2-7, INPUT, DOWN); | |
1316 | ||
1317 | PIN_SLP(gpv3-0, INPUT, DOWN); | |
1318 | PIN_SLP(gpv3-1, INPUT, DOWN); | |
1319 | PIN_SLP(gpv3-2, INPUT, DOWN); | |
1320 | PIN_SLP(gpv3-3, INPUT, DOWN); | |
1321 | PIN_SLP(gpv3-4, INPUT, DOWN); | |
1322 | PIN_SLP(gpv3-5, INPUT, DOWN); | |
1323 | PIN_SLP(gpv3-6, INPUT, DOWN); | |
1324 | PIN_SLP(gpv3-7, INPUT, DOWN); | |
1325 | ||
1326 | PIN_SLP(gpv4-0, INPUT, DOWN); | |
1327 | }; | |
1328 | }; | |
ce9940a9 | 1329 | |
1fe9a942 KK |
1330 | &pwm { |
1331 | pinctrl-0 = <&pwm0_out>; | |
1332 | pinctrl-names = "default"; | |
1333 | samsung,pwm-outputs = <0>; | |
1334 | status = "okay"; | |
1335 | }; | |
1336 | ||
ce9940a9 KK |
1337 | &rtc { |
1338 | status = "okay"; | |
1339 | clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; | |
1340 | clock-names = "rtc", "rtc_src"; | |
1341 | }; | |
1fe9a942 KK |
1342 | |
1343 | &sdhci_2 { | |
1344 | bus-width = <4>; | |
c10d3290 | 1345 | cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; |
1fe9a942 KK |
1346 | cd-inverted; |
1347 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; | |
1348 | pinctrl-names = "default"; | |
1349 | vmmc-supply = <&ldo21_reg>; | |
1350 | status = "okay"; | |
1351 | }; | |
1352 | ||
1353 | &serial_0 { | |
1354 | status = "okay"; | |
1355 | }; | |
1356 | ||
1357 | &serial_1 { | |
1358 | status = "okay"; | |
1359 | }; | |
1360 | ||
1361 | &serial_2 { | |
1362 | status = "okay"; | |
1363 | }; | |
1364 | ||
1365 | &serial_3 { | |
1366 | status = "okay"; | |
1367 | }; | |
1368 | ||
1369 | &spi_1 { | |
1370 | pinctrl-names = "default"; | |
1371 | pinctrl-0 = <&spi1_bus>; | |
c10d3290 | 1372 | cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; |
1fe9a942 KK |
1373 | status = "okay"; |
1374 | ||
26ee29a6 | 1375 | s5c73m3_spi: s5c73m3@0 { |
1fe9a942 KK |
1376 | compatible = "samsung,s5c73m3"; |
1377 | spi-max-frequency = <50000000>; | |
1378 | reg = <0>; | |
1379 | controller-data { | |
1380 | samsung,spi-feedback-delay = <2>; | |
1381 | }; | |
1382 | }; | |
1383 | }; | |
1384 | ||
1385 | &tmu { | |
1386 | vtmu-supply = <&ldo10_reg>; | |
1387 | status = "okay"; | |
1388 | }; |