Commit | Line | Data |
---|---|---|
cc4637f7 | 1 | // SPDX-License-Identifier: GPL-2.0 |
0682edaa OJ |
2 | /* |
3 | * Samsung's Exynos4210 based Universal C210 board device tree source | |
4 | * | |
5 | * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. | |
6 | * http://www.samsung.com | |
7 | * | |
8 | * Device tree source file for Samsung's Universal C210 board which is based on | |
9 | * Samsung's Exynos4210 rev0 SoC. | |
cc4637f7 | 10 | */ |
0682edaa OJ |
11 | |
12 | /dts-v1/; | |
3799279f | 13 | #include "exynos4210.dtsi" |
39c1c413 | 14 | #include <dt-bindings/gpio/gpio.h> |
0682edaa OJ |
15 | |
16 | / { | |
17 | model = "Samsung Universal C210 based on Exynos4210 rev0"; | |
8bdb31b4 | 18 | compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4"; |
0682edaa | 19 | |
824e4133 | 20 | memory@40000000 { |
1354835a | 21 | device_type = "memory"; |
0682edaa OJ |
22 | reg = <0x40000000 0x10000000 |
23 | 0x50000000 0x10000000>; | |
24 | }; | |
25 | ||
26 | chosen { | |
27 | bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; | |
62d38099 | 28 | stdout-path = &serial_2; |
0682edaa OJ |
29 | }; |
30 | ||
0682edaa OJ |
31 | |
32 | fixed-rate-clocks { | |
33 | xxti { | |
34 | compatible = "samsung,clock-xxti"; | |
35 | clock-frequency = <0>; | |
36 | }; | |
37 | ||
38 | xusbxti { | |
39 | compatible = "samsung,clock-xusbxti"; | |
40 | clock-frequency = <24000000>; | |
41 | }; | |
42 | }; | |
43 | ||
44 | vemmc_reg: voltage-regulator { | |
45 | compatible = "regulator-fixed"; | |
46 | regulator-name = "VMEM_VDD_2_8V"; | |
47 | regulator-min-microvolt = <2800000>; | |
48 | regulator-max-microvolt = <2800000>; | |
39c1c413 | 49 | gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>; |
0682edaa OJ |
50 | enable-active-high; |
51 | }; | |
52 | ||
0682edaa OJ |
53 | gpio-keys { |
54 | compatible = "gpio-keys"; | |
55 | ||
56 | vol-up-key { | |
39c1c413 | 57 | gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
0682edaa OJ |
58 | linux,code = <115>; |
59 | label = "volume up"; | |
60 | debounce-interval = <1>; | |
61 | }; | |
62 | ||
63 | vol-down-key { | |
39c1c413 | 64 | gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
0682edaa OJ |
65 | linux,code = <114>; |
66 | label = "volume down"; | |
67 | debounce-interval = <1>; | |
68 | }; | |
69 | ||
70 | config-key { | |
39c1c413 | 71 | gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; |
0682edaa OJ |
72 | linux,code = <171>; |
73 | label = "config"; | |
74 | debounce-interval = <1>; | |
36a0282a | 75 | wakeup-source; |
0682edaa OJ |
76 | }; |
77 | ||
78 | camera-key { | |
39c1c413 | 79 | gpios = <&gpx2 3 GPIO_ACTIVE_LOW>; |
0682edaa OJ |
80 | linux,code = <212>; |
81 | label = "camera"; | |
82 | debounce-interval = <1>; | |
83 | }; | |
84 | ||
85 | power-key { | |
39c1c413 | 86 | gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
0682edaa OJ |
87 | linux,code = <116>; |
88 | label = "power"; | |
89 | debounce-interval = <1>; | |
36a0282a | 90 | wakeup-source; |
0682edaa OJ |
91 | }; |
92 | ||
93 | ok-key { | |
39c1c413 | 94 | gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
0682edaa OJ |
95 | linux,code = <352>; |
96 | label = "ok"; | |
97 | debounce-interval = <1>; | |
98 | }; | |
99 | }; | |
100 | ||
101 | tsp_reg: voltage-regulator { | |
102 | compatible = "regulator-fixed"; | |
103 | regulator-name = "TSP_2_8V"; | |
104 | regulator-min-microvolt = <2800000>; | |
105 | regulator-max-microvolt = <2800000>; | |
39c1c413 | 106 | gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>; |
0682edaa OJ |
107 | enable-active-high; |
108 | }; | |
109 | ||
ffff29d1 AH |
110 | spi-lcd { |
111 | compatible = "spi-gpio"; | |
112 | #address-cells = <1>; | |
113 | #size-cells = <0>; | |
114 | ||
39c1c413 JMC |
115 | gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; |
116 | gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; | |
ffff29d1 | 117 | num-chipselects = <1>; |
39c1c413 | 118 | cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; |
ffff29d1 AH |
119 | |
120 | lcd@0 { | |
121 | compatible = "samsung,ld9040"; | |
122 | reg = <0>; | |
123 | vdd3-supply = <&ldo7_reg>; | |
124 | vci-supply = <&ldo17_reg>; | |
39c1c413 | 125 | reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; |
ffff29d1 AH |
126 | spi-max-frequency = <1200000>; |
127 | spi-cpol; | |
128 | spi-cpha; | |
129 | power-on-delay = <10>; | |
130 | reset-delay = <10>; | |
131 | panel-width-mm = <90>; | |
132 | panel-height-mm = <154>; | |
133 | display-timings { | |
134 | timing { | |
135 | clock-frequency = <23492370>; | |
136 | hactive = <480>; | |
137 | vactive = <800>; | |
138 | hback-porch = <16>; | |
139 | hfront-porch = <16>; | |
140 | vback-porch = <2>; | |
141 | vfront-porch = <28>; | |
142 | hsync-len = <2>; | |
143 | vsync-len = <1>; | |
144 | hsync-active = <0>; | |
145 | vsync-active = <0>; | |
146 | de-active = <0>; | |
147 | pixelclk-active = <0>; | |
148 | }; | |
149 | }; | |
150 | port { | |
151 | lcd_ep: endpoint { | |
152 | remote-endpoint = <&fimd_dpi_ep>; | |
153 | }; | |
154 | }; | |
155 | }; | |
156 | }; | |
157 | ||
7daa0be1 TS |
158 | hdmi_en: voltage-regulator-hdmi-5v { |
159 | compatible = "regulator-fixed"; | |
160 | regulator-name = "HDMI_5V"; | |
161 | regulator-min-microvolt = <5000000>; | |
162 | regulator-max-microvolt = <5000000>; | |
39c1c413 | 163 | gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>; |
7daa0be1 TS |
164 | enable-active-high; |
165 | }; | |
166 | ||
167 | hdmi_ddc: i2c-ddc { | |
168 | compatible = "i2c-gpio"; | |
39c1c413 | 169 | gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>; |
7daa0be1 TS |
170 | i2c-gpio,delay-us = <100>; |
171 | #address-cells = <1>; | |
172 | #size-cells = <0>; | |
173 | ||
174 | pinctrl-0 = <&i2c_ddc_bus>; | |
175 | pinctrl-names = "default"; | |
176 | status = "okay"; | |
177 | }; | |
86869d66 | 178 | }; |
7daa0be1 | 179 | |
7eba413c MP |
180 | &camera { |
181 | status = "okay"; | |
182 | ||
183 | pinctrl-names = "default"; | |
184 | pinctrl-0 = <>; | |
185 | }; | |
186 | ||
86869d66 KK |
187 | &cpu0 { |
188 | cpu0-supply = <&vdd_arm_reg>; | |
189 | }; | |
190 | ||
191 | &ehci { | |
192 | status = "okay"; | |
193 | port@0 { | |
7daa0be1 TS |
194 | status = "okay"; |
195 | }; | |
86869d66 | 196 | }; |
7daa0be1 | 197 | |
86869d66 KK |
198 | &exynos_usbphy { |
199 | status = "okay"; | |
4ae9a4c6 | 200 | vbus-supply = <&safeout1_reg>; |
86869d66 KK |
201 | }; |
202 | ||
7eba413c MP |
203 | &fimc_0 { |
204 | status = "okay"; | |
205 | assigned-clocks = <&clock CLK_MOUT_FIMC0>, | |
206 | <&clock CLK_SCLK_FIMC0>; | |
207 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
208 | assigned-clock-rates = <0>, <160000000>; | |
209 | }; | |
210 | ||
211 | &fimc_1 { | |
212 | status = "okay"; | |
213 | assigned-clocks = <&clock CLK_MOUT_FIMC1>, | |
214 | <&clock CLK_SCLK_FIMC1>; | |
215 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
216 | assigned-clock-rates = <0>, <160000000>; | |
217 | }; | |
218 | ||
219 | &fimc_2 { | |
220 | status = "okay"; | |
221 | assigned-clocks = <&clock CLK_MOUT_FIMC2>, | |
222 | <&clock CLK_SCLK_FIMC2>; | |
223 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
224 | assigned-clock-rates = <0>, <160000000>; | |
225 | }; | |
226 | ||
227 | &fimc_3 { | |
228 | status = "okay"; | |
229 | assigned-clocks = <&clock CLK_MOUT_FIMC3>, | |
230 | <&clock CLK_SCLK_FIMC3>; | |
231 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
232 | assigned-clock-rates = <0>, <160000000>; | |
233 | }; | |
234 | ||
86869d66 KK |
235 | &fimd { |
236 | pinctrl-0 = <&lcd_clk>, <&lcd_data24>; | |
237 | pinctrl-names = "default"; | |
238 | status = "okay"; | |
239 | samsung,invert-vden; | |
240 | samsung,invert-vclk; | |
241 | #address-cells = <1>; | |
242 | #size-cells = <0>; | |
243 | port@3 { | |
244 | reg = <3>; | |
245 | fimd_dpi_ep: endpoint { | |
246 | remote-endpoint = <&lcd_ep>; | |
247 | }; | |
7daa0be1 | 248 | }; |
86869d66 | 249 | }; |
7daa0be1 | 250 | |
86869d66 | 251 | &hdmi { |
05b01dd9 | 252 | hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
86869d66 KK |
253 | pinctrl-names = "default"; |
254 | pinctrl-0 = <&hdmi_hpd>; | |
255 | hdmi-en-supply = <&hdmi_en>; | |
256 | vdd-supply = <&ldo3_reg>; | |
257 | vdd_osc-supply = <&ldo4_reg>; | |
258 | vdd_pll-supply = <&ldo3_reg>; | |
259 | ddc = <&hdmi_ddc>; | |
260 | status = "okay"; | |
261 | }; | |
262 | ||
263 | &hsotg { | |
264 | vusb_d-supply = <&ldo3_reg>; | |
265 | vusb_a-supply = <&ldo8_reg>; | |
266 | dr_mode = "peripheral"; | |
267 | status = "okay"; | |
268 | }; | |
269 | ||
270 | &i2c_3 { | |
271 | samsung,i2c-sda-delay = <100>; | |
272 | samsung,i2c-slave-addr = <0x10>; | |
273 | samsung,i2c-max-bus-freq = <100000>; | |
274 | pinctrl-0 = <&i2c3_bus>; | |
275 | pinctrl-names = "default"; | |
276 | status = "okay"; | |
277 | ||
278 | tsp@4a { | |
279 | /* TBD: Atmel maXtouch touchscreen */ | |
280 | reg = <0x4a>; | |
7daa0be1 TS |
281 | }; |
282 | }; | |
283 | ||
86869d66 KK |
284 | &i2c_5 { |
285 | samsung,i2c-sda-delay = <100>; | |
286 | samsung,i2c-slave-addr = <0x10>; | |
287 | samsung,i2c-max-bus-freq = <100000>; | |
288 | pinctrl-0 = <&i2c5_bus>; | |
289 | pinctrl-names = "default"; | |
290 | status = "okay"; | |
291 | ||
292 | vdd_arm_reg: pmic@60 { | |
293 | compatible = "maxim,max8952"; | |
294 | reg = <0x60>; | |
295 | ||
39c1c413 JMC |
296 | max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, |
297 | <&gpx0 4 GPIO_ACTIVE_HIGH>; | |
86869d66 KK |
298 | max8952,default-mode = <0>; |
299 | max8952,dvs-mode-microvolt = <1250000>, <1200000>, | |
300 | <1050000>, <950000>; | |
301 | max8952,sync-freq = <0>; | |
302 | max8952,ramp-speed = <0>; | |
303 | ||
304 | regulator-name = "vdd_arm"; | |
305 | regulator-min-microvolt = <770000>; | |
306 | regulator-max-microvolt = <1400000>; | |
307 | regulator-always-on; | |
308 | regulator-boot-on; | |
309 | }; | |
310 | ||
311 | pmic@66 { | |
312 | compatible = "national,lp3974"; | |
c58ce8e6 MS |
313 | interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; |
314 | pinctrl-names = "default"; | |
315 | pinctrl-0 = <&lp3974_irq>; | |
86869d66 KK |
316 | reg = <0x66>; |
317 | ||
318 | max8998,pmic-buck1-default-dvs-idx = <0>; | |
39c1c413 JMC |
319 | max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, |
320 | <&gpx0 6 GPIO_ACTIVE_HIGH>; | |
86869d66 KK |
321 | max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, |
322 | <1100000>, <1000000>; | |
323 | ||
324 | max8998,pmic-buck2-default-dvs-idx = <0>; | |
39c1c413 | 325 | max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; |
86869d66 KK |
326 | max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; |
327 | ||
328 | regulators { | |
329 | ldo2_reg: LDO2 { | |
330 | regulator-name = "VALIVE_1.2V"; | |
331 | regulator-min-microvolt = <1200000>; | |
332 | regulator-max-microvolt = <1200000>; | |
333 | regulator-always-on; | |
334 | }; | |
335 | ||
336 | ldo3_reg: LDO3 { | |
337 | regulator-name = "VUSB+MIPI_1.1V"; | |
338 | regulator-min-microvolt = <1100000>; | |
339 | regulator-max-microvolt = <1100000>; | |
340 | regulator-always-on; | |
341 | }; | |
342 | ||
343 | ldo4_reg: LDO4 { | |
344 | regulator-name = "VADC_3.3V"; | |
345 | regulator-min-microvolt = <3300000>; | |
346 | regulator-max-microvolt = <3300000>; | |
347 | }; | |
348 | ||
349 | ldo5_reg: LDO5 { | |
350 | regulator-name = "VTF_2.8V"; | |
351 | regulator-min-microvolt = <2800000>; | |
352 | regulator-max-microvolt = <2800000>; | |
353 | }; | |
354 | ||
355 | ldo6_reg: LDO6 { | |
356 | regulator-name = "LDO6"; | |
357 | regulator-min-microvolt = <2000000>; | |
358 | regulator-max-microvolt = <2000000>; | |
359 | }; | |
360 | ||
361 | ldo7_reg: LDO7 { | |
362 | regulator-name = "VLCD+VMIPI_1.8V"; | |
363 | regulator-min-microvolt = <1800000>; | |
364 | regulator-max-microvolt = <1800000>; | |
365 | }; | |
366 | ||
367 | ldo8_reg: LDO8 { | |
368 | regulator-name = "VUSB+VDAC_3.3V"; | |
369 | regulator-min-microvolt = <3300000>; | |
370 | regulator-max-microvolt = <3300000>; | |
371 | regulator-always-on; | |
372 | }; | |
373 | ||
374 | ldo9_reg: LDO9 { | |
375 | regulator-name = "VCC_2.8V"; | |
376 | regulator-min-microvolt = <2800000>; | |
377 | regulator-max-microvolt = <2800000>; | |
378 | regulator-always-on; | |
379 | }; | |
380 | ||
381 | ldo10_reg: LDO10 { | |
382 | regulator-name = "VPLL_1.1V"; | |
383 | regulator-min-microvolt = <1100000>; | |
384 | regulator-max-microvolt = <1100000>; | |
385 | regulator-boot-on; | |
386 | regulator-always-on; | |
387 | }; | |
388 | ||
389 | ldo11_reg: LDO11 { | |
390 | regulator-name = "CAM_AF_3.3V"; | |
391 | regulator-min-microvolt = <3300000>; | |
392 | regulator-max-microvolt = <3300000>; | |
393 | }; | |
394 | ||
395 | ldo12_reg: LDO12 { | |
396 | regulator-name = "PS_2.8V"; | |
397 | regulator-min-microvolt = <2800000>; | |
398 | regulator-max-microvolt = <2800000>; | |
399 | }; | |
400 | ||
401 | ldo13_reg: LDO13 { | |
402 | regulator-name = "VHIC_1.2V"; | |
403 | regulator-min-microvolt = <1200000>; | |
404 | regulator-max-microvolt = <1200000>; | |
405 | }; | |
406 | ||
407 | ldo14_reg: LDO14 { | |
408 | regulator-name = "CAM_I_HOST_1.8V"; | |
409 | regulator-min-microvolt = <1800000>; | |
410 | regulator-max-microvolt = <1800000>; | |
411 | }; | |
412 | ||
413 | ldo15_reg: LDO15 { | |
414 | regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; | |
415 | regulator-min-microvolt = <1200000>; | |
416 | regulator-max-microvolt = <1200000>; | |
417 | }; | |
418 | ||
419 | ldo16_reg: LDO16 { | |
420 | regulator-name = "CAM_S_ANA_2.8V"; | |
421 | regulator-min-microvolt = <2800000>; | |
422 | regulator-max-microvolt = <2800000>; | |
423 | }; | |
424 | ||
425 | ldo17_reg: LDO17 { | |
426 | regulator-name = "VCC_3.0V_LCD"; | |
427 | regulator-min-microvolt = <3000000>; | |
428 | regulator-max-microvolt = <3000000>; | |
429 | }; | |
430 | ||
431 | buck1_reg: BUCK1 { | |
432 | regulator-name = "VINT_1.1V"; | |
433 | regulator-min-microvolt = <750000>; | |
434 | regulator-max-microvolt = <1500000>; | |
435 | regulator-boot-on; | |
436 | regulator-always-on; | |
437 | }; | |
438 | ||
439 | buck2_reg: BUCK2 { | |
440 | regulator-name = "VG3D_1.1V"; | |
441 | regulator-min-microvolt = <750000>; | |
442 | regulator-max-microvolt = <1500000>; | |
443 | regulator-boot-on; | |
444 | }; | |
445 | ||
446 | buck3_reg: BUCK3 { | |
447 | regulator-name = "VCC_1.8V"; | |
448 | regulator-min-microvolt = <1800000>; | |
449 | regulator-max-microvolt = <1800000>; | |
450 | regulator-always-on; | |
451 | }; | |
452 | ||
453 | buck4_reg: BUCK4 { | |
454 | regulator-name = "VMEM_1.2V"; | |
455 | regulator-min-microvolt = <1200000>; | |
456 | regulator-max-microvolt = <1200000>; | |
457 | regulator-always-on; | |
458 | }; | |
459 | ||
460 | ap32khz_reg: EN32KHz-AP { | |
461 | regulator-name = "32KHz AP"; | |
462 | regulator-always-on; | |
463 | }; | |
464 | ||
465 | cp32khz_reg: EN32KHz-CP { | |
466 | regulator-name = "32KHz CP"; | |
467 | }; | |
468 | ||
469 | vichg_reg: ENVICHG { | |
470 | regulator-name = "VICHG"; | |
471 | }; | |
472 | ||
473 | safeout1_reg: ESAFEOUT1 { | |
474 | regulator-name = "SAFEOUT1"; | |
86869d66 KK |
475 | }; |
476 | ||
477 | safeout2_reg: ESAFEOUT2 { | |
478 | regulator-name = "SAFEOUT2"; | |
479 | regulator-boot-on; | |
480 | }; | |
481 | }; | |
482 | }; | |
483 | }; | |
484 | ||
485 | &i2c_8 { | |
486 | status = "okay"; | |
487 | }; | |
488 | ||
7eba413c MP |
489 | &mct { |
490 | compatible = "none"; | |
491 | }; | |
492 | ||
86869d66 KK |
493 | &mdma1 { |
494 | reg = <0x12840000 0x1000>; | |
495 | }; | |
496 | ||
497 | &mixer { | |
498 | status = "okay"; | |
499 | }; | |
500 | ||
501 | &ohci { | |
502 | status = "okay"; | |
503 | port@0 { | |
504 | status = "okay"; | |
505 | }; | |
300bde79 TA |
506 | }; |
507 | ||
7daa0be1 | 508 | &pinctrl_1 { |
c58ce8e6 MS |
509 | lp3974_irq: lp3974-irq { |
510 | samsung,pins = "gpx0-7", "gpx2-7"; | |
511 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
512 | }; | |
513 | ||
7daa0be1 TS |
514 | hdmi_hpd: hdmi-hpd { |
515 | samsung,pins = "gpx3-7"; | |
4b1a9e35 | 516 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
7daa0be1 TS |
517 | }; |
518 | }; | |
519 | ||
520 | &pinctrl_0 { | |
521 | i2c_ddc_bus: i2c-ddc-bus { | |
522 | samsung,pins = "gpe4-2", "gpe4-3"; | |
4b1a9e35 KK |
523 | samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
524 | samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; | |
525 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
7daa0be1 | 526 | }; |
0682edaa | 527 | }; |
22c98592 | 528 | |
86869d66 KK |
529 | &pwm { |
530 | compatible = "samsung,s5p6440-pwm"; | |
531 | status = "okay"; | |
532 | }; | |
533 | ||
534 | &sdhci_0 { | |
535 | bus-width = <8>; | |
536 | non-removable; | |
537 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; | |
538 | pinctrl-names = "default"; | |
539 | vmmc-supply = <&vemmc_reg>; | |
540 | status = "okay"; | |
541 | }; | |
542 | ||
543 | &sdhci_2 { | |
544 | bus-width = <4>; | |
545 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; | |
546 | pinctrl-names = "default"; | |
547 | vmmc-supply = <&ldo5_reg>; | |
b8032118 | 548 | cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; |
86869d66 KK |
549 | status = "okay"; |
550 | }; | |
551 | ||
552 | &serial_0 { | |
553 | status = "okay"; | |
e8d761b8 MS |
554 | /delete-property/dmas; |
555 | /delete-property/dma-names; | |
86869d66 KK |
556 | }; |
557 | ||
558 | &serial_1 { | |
559 | status = "okay"; | |
e8d761b8 MS |
560 | /delete-property/dmas; |
561 | /delete-property/dma-names; | |
86869d66 KK |
562 | }; |
563 | ||
564 | &serial_2 { | |
565 | status = "okay"; | |
e8d761b8 MS |
566 | /delete-property/dmas; |
567 | /delete-property/dma-names; | |
86869d66 KK |
568 | }; |
569 | ||
570 | &serial_3 { | |
571 | status = "okay"; | |
e8d761b8 MS |
572 | /delete-property/dmas; |
573 | /delete-property/dma-names; | |
22c98592 | 574 | }; |
7eba413c MP |
575 | |
576 | &sysram { | |
577 | smp-sysram@0 { | |
578 | status = "disabled"; | |
579 | }; | |
580 | ||
581 | smp-sysram@5000 { | |
582 | compatible = "samsung,exynos4210-sysram"; | |
583 | reg = <0x5000 0x1000>; | |
584 | }; | |
585 | ||
586 | smp-sysram@1f000 { | |
587 | status = "disabled"; | |
588 | }; | |
589 | }; |