Commit | Line | Data |
---|---|---|
e0cefb3f YC |
1 | /* |
2 | * Samsung's Exynos3250 based Monk board device tree source | |
3 | * | |
4 | * Copyright (c) 2014 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Monk board which is based on | |
8 | * Samsung Exynos3250 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
16 | #include "exynos3250.dtsi" | |
17 | #include <dt-bindings/input/input.h> | |
13b9b64e | 18 | #include <dt-bindings/gpio/gpio.h> |
e0cefb3f YC |
19 | |
20 | / { | |
21 | model = "Samsung Monk board"; | |
22 | compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3"; | |
23 | ||
24 | aliases { | |
25 | i2c7 = &i2c_max77836; | |
26 | }; | |
27 | ||
28 | memory { | |
29 | reg = <0x40000000 0x1ff00000>; | |
30 | }; | |
31 | ||
32 | firmware@0205F000 { | |
33 | compatible = "samsung,secure-firmware"; | |
34 | reg = <0x0205F000 0x1000>; | |
35 | }; | |
36 | ||
37 | gpio_keys { | |
38 | compatible = "gpio-keys"; | |
39 | ||
40 | power_key { | |
13b9b64e | 41 | gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
e0cefb3f YC |
42 | linux,code = <KEY_POWER>; |
43 | label = "power key"; | |
44 | debounce-interval = <10>; | |
45 | gpio-key,wakeup; | |
46 | }; | |
47 | }; | |
48 | ||
49 | vemmc_reg: voltage-regulator-0 { | |
50 | compatible = "regulator-fixed"; | |
51 | regulator-name = "V_EMMC_2.8V-fixed"; | |
52 | regulator-min-microvolt = <2800000>; | |
53 | regulator-max-microvolt = <2800000>; | |
54 | gpio = <&gpk0 2 0>; | |
55 | enable-active-high; | |
56 | }; | |
57 | ||
58 | i2c_max77836: i2c-gpio-0 { | |
59 | compatible = "i2c-gpio"; | |
60 | gpios = <&gpd0 2 0>, <&gpd0 3 0>; | |
61 | #address-cells = <1>; | |
62 | #size-cells = <0>; | |
63 | ||
64 | max77836: subpmic@25 { | |
65 | compatible = "maxim,max77836"; | |
66 | interrupt-parent = <&gpx1>; | |
67 | interrupts = <5 0>; | |
68 | reg = <0x25>; | |
69 | wakeup; | |
70 | ||
71 | muic: max77836-muic { | |
72 | compatible = "maxim,max77836-muic"; | |
73 | }; | |
74 | ||
75 | regulators { | |
76 | compatible = "maxim,max77836-regulator"; | |
77 | safeout_reg: SAFEOUT { | |
78 | regulator-name = "SAFEOUT"; | |
79 | }; | |
80 | ||
81 | charger_reg: CHARGER { | |
82 | regulator-name = "CHARGER"; | |
83 | regulator-min-microamp = <45000>; | |
84 | regulator-max-microamp = <475000>; | |
85 | regulator-boot-on; | |
86 | }; | |
87 | ||
88 | motor_reg: LDO1 { | |
89 | regulator-name = "MOT_2.7V"; | |
90 | regulator-min-microvolt = <1100000>; | |
91 | regulator-max-microvolt = <2700000>; | |
92 | }; | |
93 | ||
94 | LDO2 { | |
95 | regulator-name = "UNUSED_LDO2"; | |
96 | regulator-min-microvolt = <800000>; | |
97 | regulator-max-microvolt = <3950000>; | |
98 | }; | |
99 | }; | |
100 | ||
101 | charger { | |
102 | compatible = "maxim,max77836-charger"; | |
103 | ||
104 | maxim,constant-uvolt = <4350000>; | |
105 | maxim,fast-charge-uamp = <225000>; | |
106 | maxim,eoc-uamp = <7500>; | |
107 | maxim,ovp-uvolt = <6500000>; | |
108 | }; | |
109 | }; | |
110 | }; | |
9ce09a1f JK |
111 | |
112 | haptics { | |
113 | compatible = "regulator-haptic"; | |
114 | haptic-supply = <&motor_reg>; | |
115 | min-microvolt = <1100000>; | |
116 | max-microvolt = <2700000>; | |
117 | }; | |
e0cefb3f YC |
118 | }; |
119 | ||
120 | &adc { | |
121 | vdd-supply = <&ldo3_reg>; | |
122 | status = "okay"; | |
123 | assigned-clocks = <&cmu CLK_SCLK_TSADC>; | |
124 | assigned-clock-rates = <6000000>; | |
125 | ||
126 | thermistor-ap { | |
127 | compatible = "ntc,ncp15wb473"; | |
128 | pullup-uv = <1800000>; | |
129 | pullup-ohm = <100000>; | |
130 | pulldown-ohm = <100000>; | |
131 | io-channels = <&adc 0>; | |
132 | }; | |
133 | ||
134 | thermistor-battery { | |
135 | compatible = "ntc,ncp15wb473"; | |
136 | pullup-uv = <1800000>; | |
137 | pullup-ohm = <100000>; | |
138 | pulldown-ohm = <100000>; | |
139 | io-channels = <&adc 1>; | |
140 | }; | |
141 | }; | |
142 | ||
3fc5f3a5 JK |
143 | &exynos_usbphy { |
144 | status = "okay"; | |
145 | }; | |
146 | ||
147 | &hsotg { | |
148 | vusb_d-supply = <&ldo15_reg>; | |
149 | vusb_a-supply = <&ldo12_reg>; | |
32f144f2 | 150 | dr_mode = "peripheral"; |
3fc5f3a5 JK |
151 | status = "okay"; |
152 | }; | |
153 | ||
e0cefb3f YC |
154 | &i2c_0 { |
155 | #address-cells = <1>; | |
156 | #size-cells = <0>; | |
157 | samsung,i2c-sda-delay = <100>; | |
158 | samsung,i2c-slave-addr = <0x10>; | |
159 | samsung,i2c-max-bus-freq = <100000>; | |
160 | status = "okay"; | |
161 | ||
162 | s2mps14_pmic@66 { | |
163 | compatible = "samsung,s2mps14-pmic"; | |
164 | interrupt-parent = <&gpx0>; | |
165 | interrupts = <7 0>; | |
166 | reg = <0x66>; | |
167 | wakeup; | |
168 | ||
169 | s2mps14_osc: clocks { | |
170 | compatible = "samsung,s2mps14-clk"; | |
171 | #clock-cells = <1>; | |
172 | clock-output-names = "s2mps14_ap", "unused", | |
173 | "s2mps14_bt"; | |
174 | }; | |
175 | ||
176 | regulators { | |
177 | ldo1_reg: LDO1 { | |
178 | regulator-name = "VAP_ALIVE_1.0V"; | |
179 | regulator-min-microvolt = <1000000>; | |
180 | regulator-max-microvolt = <1000000>; | |
181 | regulator-always-on; | |
182 | }; | |
183 | ||
184 | ldo2_reg: LDO2 { | |
185 | regulator-name = "VAP_M1_1.2V"; | |
186 | regulator-min-microvolt = <1200000>; | |
187 | regulator-max-microvolt = <1200000>; | |
188 | regulator-always-on; | |
189 | }; | |
190 | ||
191 | ldo3_reg: LDO3 { | |
192 | regulator-name = "VCC_AP_1.8V"; | |
193 | regulator-min-microvolt = <1800000>; | |
194 | regulator-max-microvolt = <1800000>; | |
195 | regulator-always-on; | |
196 | }; | |
197 | ||
198 | ldo4_reg: LDO4 { | |
199 | regulator-name = "VAP_AVDD_PLL1"; | |
200 | regulator-min-microvolt = <1800000>; | |
201 | regulator-max-microvolt = <1800000>; | |
202 | regulator-always-on; | |
203 | }; | |
204 | ||
205 | ldo5_reg: LDO5 { | |
206 | regulator-name = "VAP_PLL_ISO_1.0V"; | |
207 | regulator-min-microvolt = <1000000>; | |
208 | regulator-max-microvolt = <1000000>; | |
209 | regulator-always-on; | |
210 | }; | |
211 | ||
212 | ldo6_reg: LDO6 { | |
213 | regulator-name = "VAP_MIPI_1.0V"; | |
214 | regulator-min-microvolt = <1000000>; | |
215 | regulator-max-microvolt = <1000000>; | |
216 | }; | |
217 | ||
218 | ldo7_reg: LDO7 { | |
219 | regulator-name = "VAP_AVDD_1.8V"; | |
220 | regulator-min-microvolt = <1800000>; | |
221 | regulator-max-microvolt = <1800000>; | |
222 | regulator-always-on; | |
223 | }; | |
224 | ||
225 | ldo8_reg: LDO8 { | |
226 | regulator-name = "VAP_USB_3.0V"; | |
227 | regulator-min-microvolt = <3000000>; | |
228 | regulator-max-microvolt = <3000000>; | |
229 | regulator-always-on; | |
230 | }; | |
231 | ||
232 | ldo9_reg: LDO9 { | |
233 | regulator-name = "V_LPDDR_1.2V"; | |
234 | regulator-min-microvolt = <1200000>; | |
235 | regulator-max-microvolt = <1200000>; | |
236 | regulator-always-on; | |
237 | }; | |
238 | ||
239 | ldo10_reg: LDO10 { | |
240 | regulator-name = "UNUSED_LDO10"; | |
241 | regulator-min-microvolt = <1000000>; | |
242 | regulator-max-microvolt = <1000000>; | |
243 | }; | |
244 | ||
245 | ldo11_reg: LDO11 { | |
246 | regulator-name = "V_EMMC_1.8V"; | |
247 | regulator-min-microvolt = <1800000>; | |
248 | regulator-max-microvolt = <1800000>; | |
249 | samsung,ext-control-gpios = <&gpk0 2 0>; | |
250 | }; | |
251 | ||
252 | ldo12_reg: LDO12 { | |
253 | regulator-name = "V_EMMC_2.8V"; | |
254 | regulator-min-microvolt = <2800000>; | |
255 | regulator-max-microvolt = <2800000>; | |
256 | samsung,ext-control-gpios = <&gpk0 2 0>; | |
257 | }; | |
258 | ||
259 | ldo13_reg: LDO13 { | |
260 | regulator-name = "VSENSOR_2.85V"; | |
261 | regulator-min-microvolt = <2850000>; | |
262 | regulator-max-microvolt = <2850000>; | |
263 | regulator-always-on; | |
264 | }; | |
265 | ||
266 | ldo14_reg: LDO14 { | |
267 | regulator-name = "UNUSED_LDO14"; | |
268 | regulator-min-microvolt = <1800000>; | |
269 | regulator-max-microvolt = <1800000>; | |
270 | }; | |
271 | ||
272 | ldo15_reg: LDO15 { | |
273 | regulator-name = "TSP_AVDD_3.3V"; | |
274 | regulator-min-microvolt = <3300000>; | |
275 | regulator-max-microvolt = <3300000>; | |
276 | }; | |
277 | ||
278 | ldo16_reg: LDO16 { | |
279 | regulator-name = "LCD_VDD_3.3V"; | |
280 | regulator-min-microvolt = <3300000>; | |
281 | regulator-max-microvolt = <3300000>; | |
282 | }; | |
283 | ||
284 | ldo17_reg: LDO17 { | |
285 | regulator-name = "UNUSED_LDO17"; | |
286 | regulator-min-microvolt = <1800000>; | |
287 | regulator-max-microvolt = <1800000>; | |
288 | }; | |
289 | ||
290 | ldo18_reg: LDO18 { | |
291 | regulator-name = "UNUSED_LDO18"; | |
292 | regulator-min-microvolt = <1800000>; | |
293 | regulator-max-microvolt = <1800000>; | |
294 | }; | |
295 | ||
296 | ldo19_reg: LDO19 { | |
297 | regulator-name = "TSP_VDD_1.8V"; | |
298 | regulator-min-microvolt = <1800000>; | |
299 | regulator-max-microvolt = <1800000>; | |
300 | }; | |
301 | ||
302 | ldo20_reg: LDO20 { | |
303 | regulator-name = "LCD_VDD_1.8V"; | |
304 | regulator-min-microvolt = <1800000>; | |
305 | regulator-max-microvolt = <1800000>; | |
306 | }; | |
307 | ||
308 | ldo21_reg: LDO21 { | |
309 | regulator-name = "UNUSED_LDO21"; | |
310 | regulator-min-microvolt = <1000000>; | |
311 | regulator-max-microvolt = <1000000>; | |
312 | }; | |
313 | ||
314 | ldo22_reg: LDO22 { | |
315 | regulator-name = "UNUSED_LDO22"; | |
316 | regulator-min-microvolt = <1000000>; | |
317 | regulator-max-microvolt = <1000000>; | |
318 | }; | |
319 | ||
320 | ldo23_reg: LDO23 { | |
321 | regulator-name = "UNUSED_LDO23"; | |
322 | regulator-min-microvolt = <1000000>; | |
323 | regulator-max-microvolt = <1000000>; | |
324 | regulator-always-on; | |
325 | }; | |
326 | ||
327 | ldo24_reg: LDO24 { | |
328 | regulator-name = "UNUSED_LDO24"; | |
329 | regulator-min-microvolt = <1800000>; | |
330 | regulator-max-microvolt = <1800000>; | |
331 | }; | |
332 | ||
333 | ldo25_reg: LDO25 { | |
334 | regulator-name = "UNUSED_LDO25"; | |
335 | regulator-min-microvolt = <1800000>; | |
336 | regulator-max-microvolt = <1800000>; | |
337 | }; | |
338 | ||
339 | buck1_reg: BUCK1 { | |
340 | regulator-name = "VAP_MIF_1.0V"; | |
341 | regulator-min-microvolt = <800000>; | |
342 | regulator-max-microvolt = <900000>; | |
343 | regulator-always-on; | |
344 | }; | |
345 | ||
346 | buck2_reg: BUCK2 { | |
347 | regulator-name = "VAP_ARM_1.0V"; | |
348 | regulator-min-microvolt = <850000>; | |
349 | regulator-max-microvolt = <1150000>; | |
350 | regulator-always-on; | |
351 | }; | |
352 | ||
353 | buck3_reg: BUCK3 { | |
354 | regulator-name = "VAP_INT3D_1.0V"; | |
355 | regulator-min-microvolt = <850000>; | |
356 | regulator-max-microvolt = <1000000>; | |
357 | regulator-always-on; | |
358 | }; | |
359 | ||
360 | buck4_reg: BUCK4 { | |
361 | regulator-name = "VCC_SUB_1.95V"; | |
362 | regulator-min-microvolt = <1950000>; | |
363 | regulator-max-microvolt = <1950000>; | |
364 | regulator-always-on; | |
365 | }; | |
366 | ||
367 | buck5_reg: BUCK5 { | |
368 | regulator-name = "VCC_SUB_1.35V"; | |
369 | regulator-min-microvolt = <1350000>; | |
370 | regulator-max-microvolt = <1350000>; | |
371 | regulator-always-on; | |
372 | }; | |
373 | }; | |
374 | }; | |
375 | }; | |
376 | ||
377 | &i2c_1 { | |
378 | #address-cells = <1>; | |
379 | #size-cells = <0>; | |
380 | samsung,i2c-sda-delay = <100>; | |
381 | samsung,i2c-slave-addr = <0x10>; | |
382 | samsung,i2c-max-bus-freq = <400000>; | |
383 | status = "okay"; | |
384 | ||
385 | fuelgauge@36 { | |
386 | compatible = "maxim,max77836-battery"; | |
387 | interrupt-parent = <&gpx1>; | |
388 | interrupts = <2 8>; | |
389 | reg = <0x36>; | |
390 | }; | |
391 | }; | |
392 | ||
393 | &i2s2 { | |
394 | status = "okay"; | |
395 | }; | |
396 | ||
397 | &mshc_0 { | |
398 | #address-cells = <1>; | |
399 | #size-cells = <0>; | |
400 | num-slots = <1>; | |
401 | broken-cd; | |
402 | non-removable; | |
403 | cap-mmc-highspeed; | |
404 | desc-num = <4>; | |
405 | mmc-hs200-1_8v; | |
406 | card-detect-delay = <200>; | |
407 | vmmc-supply = <&vemmc_reg>; | |
408 | clock-frequency = <100000000>; | |
409 | clock-freq-min-max = <400000 100000000>; | |
410 | samsung,dw-mshc-ciu-div = <1>; | |
411 | samsung,dw-mshc-sdr-timing = <0 1>; | |
412 | samsung,dw-mshc-ddr-timing = <1 2>; | |
413 | pinctrl-names = "default"; | |
414 | pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; | |
415 | bus-width = <8>; | |
416 | status = "okay"; | |
417 | }; | |
418 | ||
419 | &serial_0 { | |
420 | assigned-clocks = <&cmu CLK_SCLK_UART0>; | |
421 | assigned-clock-rates = <100000000>; | |
422 | status = "okay"; | |
423 | }; | |
424 | ||
425 | &serial_1 { | |
426 | status = "okay"; | |
427 | }; | |
428 | ||
429 | &tmu { | |
430 | vtmu-supply = <&ldo7_reg>; | |
431 | status = "okay"; | |
432 | }; | |
433 | ||
434 | &rtc { | |
435 | clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; | |
436 | clock-names = "rtc", "rtc_src"; | |
437 | status = "okay"; | |
438 | }; | |
439 | ||
8d6b9b46 CC |
440 | &ppmu_dmc0 { |
441 | status = "okay"; | |
442 | ||
443 | events { | |
444 | ppmu_dmc0_3: ppmu-event3-dmc0 { | |
445 | event-name = "ppmu-event3-dmc0"; | |
446 | }; | |
447 | }; | |
448 | }; | |
449 | ||
450 | &ppmu_dmc1 { | |
451 | status = "okay"; | |
452 | ||
453 | events { | |
454 | ppmu_dmc1_3: ppmu-event3-dmc1 { | |
455 | event-name = "ppmu-event3-dmc1"; | |
456 | }; | |
457 | }; | |
458 | }; | |
459 | ||
460 | &ppmu_leftbus { | |
461 | status = "okay"; | |
462 | ||
463 | events { | |
464 | ppmu_leftbus_3: ppmu-event3-leftbus { | |
465 | event-name = "ppmu-event3-leftbus"; | |
466 | }; | |
467 | }; | |
468 | }; | |
469 | ||
470 | &ppmu_rightbus { | |
471 | status = "okay"; | |
472 | ||
473 | events { | |
474 | ppmu_rightbus_3: ppmu-event3-rightbus { | |
475 | event-name = "ppmu-event3-rightbus"; | |
476 | }; | |
477 | }; | |
478 | }; | |
479 | ||
e0cefb3f YC |
480 | &xusbxti { |
481 | clock-frequency = <24000000>; | |
482 | }; | |
483 | ||
484 | &pinctrl_0 { | |
485 | pinctrl-names = "default"; | |
486 | pinctrl-0 = <&sleep0>; | |
487 | ||
488 | sleep0: sleep-state { | |
489 | PIN_SLP(gpa0-0, INPUT, DOWN); | |
490 | PIN_SLP(gpa0-1, INPUT, DOWN); | |
491 | PIN_SLP(gpa0-2, INPUT, DOWN); | |
492 | PIN_SLP(gpa0-3, INPUT, DOWN); | |
493 | PIN_SLP(gpa0-4, INPUT, DOWN); | |
494 | PIN_SLP(gpa0-5, INPUT, DOWN); | |
495 | PIN_SLP(gpa0-6, INPUT, DOWN); | |
496 | PIN_SLP(gpa0-7, INPUT, DOWN); | |
497 | ||
498 | PIN_SLP(gpa1-0, INPUT, DOWN); | |
499 | PIN_SLP(gpa1-1, INPUT, DOWN); | |
500 | PIN_SLP(gpa1-2, INPUT, DOWN); | |
501 | PIN_SLP(gpa1-3, INPUT, DOWN); | |
502 | PIN_SLP(gpa1-4, INPUT, DOWN); | |
503 | PIN_SLP(gpa1-5, INPUT, DOWN); | |
504 | ||
505 | PIN_SLP(gpb-0, PREV, NONE); | |
506 | PIN_SLP(gpb-1, PREV, NONE); | |
507 | PIN_SLP(gpb-2, PREV, NONE); | |
508 | PIN_SLP(gpb-3, PREV, NONE); | |
509 | PIN_SLP(gpb-4, INPUT, DOWN); | |
510 | PIN_SLP(gpb-5, INPUT, DOWN); | |
511 | PIN_SLP(gpb-6, INPUT, DOWN); | |
512 | PIN_SLP(gpb-7, INPUT, DOWN); | |
513 | ||
514 | PIN_SLP(gpc0-0, INPUT, DOWN); | |
515 | PIN_SLP(gpc0-1, INPUT, DOWN); | |
516 | PIN_SLP(gpc0-2, INPUT, DOWN); | |
517 | PIN_SLP(gpc0-3, INPUT, DOWN); | |
518 | PIN_SLP(gpc0-4, INPUT, DOWN); | |
519 | ||
520 | PIN_SLP(gpc1-0, INPUT, DOWN); | |
521 | PIN_SLP(gpc1-1, INPUT, DOWN); | |
522 | PIN_SLP(gpc1-2, INPUT, DOWN); | |
523 | PIN_SLP(gpc1-3, INPUT, DOWN); | |
524 | PIN_SLP(gpc1-4, INPUT, DOWN); | |
525 | ||
526 | PIN_SLP(gpd0-0, INPUT, DOWN); | |
527 | PIN_SLP(gpd0-1, INPUT, DOWN); | |
528 | PIN_SLP(gpd0-2, INPUT, NONE); | |
529 | PIN_SLP(gpd0-3, INPUT, NONE); | |
530 | ||
531 | PIN_SLP(gpd1-0, INPUT, NONE); | |
532 | PIN_SLP(gpd1-1, INPUT, NONE); | |
533 | PIN_SLP(gpd1-2, INPUT, NONE); | |
534 | PIN_SLP(gpd1-3, INPUT, NONE); | |
535 | }; | |
536 | }; | |
537 | ||
538 | &pinctrl_1 { | |
539 | pinctrl-names = "default"; | |
540 | pinctrl-0 = <&sleep1>; | |
541 | ||
542 | sleep1: sleep-state { | |
543 | PIN_SLP(gpe0-0, PREV, NONE); | |
544 | PIN_SLP(gpe0-1, PREV, NONE); | |
545 | PIN_SLP(gpe0-2, INPUT, DOWN); | |
546 | PIN_SLP(gpe0-3, INPUT, DOWN); | |
547 | PIN_SLP(gpe0-4, PREV, NONE); | |
548 | PIN_SLP(gpe0-5, INPUT, DOWN); | |
549 | PIN_SLP(gpe0-6, INPUT, DOWN); | |
550 | PIN_SLP(gpe0-7, INPUT, DOWN); | |
551 | ||
552 | PIN_SLP(gpe1-0, INPUT, DOWN); | |
553 | PIN_SLP(gpe1-1, PREV, NONE); | |
554 | PIN_SLP(gpe1-2, INPUT, DOWN); | |
555 | PIN_SLP(gpe1-3, INPUT, DOWN); | |
556 | PIN_SLP(gpe1-4, INPUT, DOWN); | |
557 | PIN_SLP(gpe1-5, INPUT, DOWN); | |
558 | PIN_SLP(gpe1-6, INPUT, DOWN); | |
559 | PIN_SLP(gpe1-7, INPUT, NONE); | |
560 | ||
561 | PIN_SLP(gpe2-0, INPUT, NONE); | |
562 | PIN_SLP(gpe2-1, INPUT, NONE); | |
563 | PIN_SLP(gpe2-2, INPUT, NONE); | |
564 | ||
565 | PIN_SLP(gpk0-0, INPUT, DOWN); | |
566 | PIN_SLP(gpk0-1, INPUT, DOWN); | |
567 | PIN_SLP(gpk0-2, OUT0, NONE); | |
568 | PIN_SLP(gpk0-3, INPUT, DOWN); | |
569 | PIN_SLP(gpk0-4, INPUT, DOWN); | |
570 | PIN_SLP(gpk0-5, INPUT, DOWN); | |
571 | PIN_SLP(gpk0-6, INPUT, DOWN); | |
572 | PIN_SLP(gpk0-7, INPUT, DOWN); | |
573 | ||
574 | PIN_SLP(gpk1-0, PREV, NONE); | |
575 | PIN_SLP(gpk1-1, PREV, NONE); | |
576 | PIN_SLP(gpk1-2, INPUT, DOWN); | |
577 | PIN_SLP(gpk1-3, PREV, NONE); | |
578 | PIN_SLP(gpk1-4, PREV, NONE); | |
579 | PIN_SLP(gpk1-5, PREV, NONE); | |
580 | PIN_SLP(gpk1-6, PREV, NONE); | |
581 | ||
582 | PIN_SLP(gpk2-0, INPUT, DOWN); | |
583 | PIN_SLP(gpk2-1, INPUT, DOWN); | |
584 | PIN_SLP(gpk2-2, INPUT, DOWN); | |
585 | PIN_SLP(gpk2-3, INPUT, DOWN); | |
586 | PIN_SLP(gpk2-4, INPUT, DOWN); | |
587 | PIN_SLP(gpk2-5, INPUT, DOWN); | |
588 | PIN_SLP(gpk2-6, INPUT, DOWN); | |
589 | ||
590 | PIN_SLP(gpl0-0, INPUT, DOWN); | |
591 | PIN_SLP(gpl0-1, INPUT, DOWN); | |
592 | PIN_SLP(gpl0-2, INPUT, DOWN); | |
593 | PIN_SLP(gpl0-3, INPUT, DOWN); | |
594 | ||
595 | PIN_SLP(gpm0-0, INPUT, DOWN); | |
596 | PIN_SLP(gpm0-1, INPUT, DOWN); | |
597 | PIN_SLP(gpm0-2, INPUT, DOWN); | |
598 | PIN_SLP(gpm0-3, INPUT, DOWN); | |
599 | PIN_SLP(gpm0-4, INPUT, DOWN); | |
600 | PIN_SLP(gpm0-5, INPUT, DOWN); | |
601 | PIN_SLP(gpm0-6, INPUT, DOWN); | |
602 | PIN_SLP(gpm0-7, INPUT, DOWN); | |
603 | ||
604 | PIN_SLP(gpm1-0, INPUT, DOWN); | |
605 | PIN_SLP(gpm1-1, INPUT, DOWN); | |
606 | PIN_SLP(gpm1-2, INPUT, DOWN); | |
607 | PIN_SLP(gpm1-3, INPUT, DOWN); | |
608 | PIN_SLP(gpm1-4, INPUT, DOWN); | |
609 | PIN_SLP(gpm1-5, INPUT, DOWN); | |
610 | PIN_SLP(gpm1-6, INPUT, DOWN); | |
611 | ||
612 | PIN_SLP(gpm2-0, INPUT, DOWN); | |
613 | PIN_SLP(gpm2-1, INPUT, DOWN); | |
614 | PIN_SLP(gpm2-2, INPUT, DOWN); | |
615 | PIN_SLP(gpm2-3, INPUT, DOWN); | |
616 | PIN_SLP(gpm2-4, INPUT, DOWN); | |
617 | ||
618 | PIN_SLP(gpm3-0, INPUT, DOWN); | |
619 | PIN_SLP(gpm3-1, INPUT, DOWN); | |
620 | PIN_SLP(gpm3-2, INPUT, DOWN); | |
621 | PIN_SLP(gpm3-3, INPUT, DOWN); | |
622 | PIN_SLP(gpm3-4, INPUT, DOWN); | |
623 | PIN_SLP(gpm3-5, INPUT, DOWN); | |
624 | PIN_SLP(gpm3-6, INPUT, DOWN); | |
625 | PIN_SLP(gpm3-7, INPUT, DOWN); | |
626 | ||
627 | PIN_SLP(gpm4-0, INPUT, DOWN); | |
628 | PIN_SLP(gpm4-1, INPUT, DOWN); | |
629 | PIN_SLP(gpm4-2, INPUT, DOWN); | |
630 | PIN_SLP(gpm4-3, INPUT, DOWN); | |
631 | PIN_SLP(gpm4-4, INPUT, DOWN); | |
632 | PIN_SLP(gpm4-5, INPUT, DOWN); | |
633 | PIN_SLP(gpm4-6, INPUT, DOWN); | |
634 | PIN_SLP(gpm4-7, INPUT, DOWN); | |
635 | }; | |
636 | }; |