Commit | Line | Data |
---|---|---|
e0cefb3f YC |
1 | /* |
2 | * Samsung's Exynos3250 based Monk board device tree source | |
3 | * | |
4 | * Copyright (c) 2014 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Monk board which is based on | |
8 | * Samsung Exynos3250 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
16 | #include "exynos3250.dtsi" | |
17 | #include <dt-bindings/input/input.h> | |
13b9b64e | 18 | #include <dt-bindings/gpio/gpio.h> |
c5abf619 | 19 | #include <dt-bindings/clock/samsung,s2mps11.h> |
e0cefb3f YC |
20 | |
21 | / { | |
22 | model = "Samsung Monk board"; | |
23 | compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3"; | |
24 | ||
25 | aliases { | |
26 | i2c7 = &i2c_max77836; | |
27 | }; | |
28 | ||
29 | memory { | |
30 | reg = <0x40000000 0x1ff00000>; | |
31 | }; | |
32 | ||
33 | firmware@0205F000 { | |
34 | compatible = "samsung,secure-firmware"; | |
35 | reg = <0x0205F000 0x1000>; | |
36 | }; | |
37 | ||
38 | gpio_keys { | |
39 | compatible = "gpio-keys"; | |
40 | ||
41 | power_key { | |
13b9b64e | 42 | gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
e0cefb3f YC |
43 | linux,code = <KEY_POWER>; |
44 | label = "power key"; | |
45 | debounce-interval = <10>; | |
36a0282a | 46 | wakeup-source; |
e0cefb3f YC |
47 | }; |
48 | }; | |
49 | ||
50 | vemmc_reg: voltage-regulator-0 { | |
51 | compatible = "regulator-fixed"; | |
52 | regulator-name = "V_EMMC_2.8V-fixed"; | |
53 | regulator-min-microvolt = <2800000>; | |
54 | regulator-max-microvolt = <2800000>; | |
de77e52d | 55 | gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
56 | enable-active-high; |
57 | }; | |
58 | ||
59 | i2c_max77836: i2c-gpio-0 { | |
60 | compatible = "i2c-gpio"; | |
de77e52d | 61 | gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
62 | #address-cells = <1>; |
63 | #size-cells = <0>; | |
64 | ||
65 | max77836: subpmic@25 { | |
66 | compatible = "maxim,max77836"; | |
67 | interrupt-parent = <&gpx1>; | |
68 | interrupts = <5 0>; | |
69 | reg = <0x25>; | |
36a0282a | 70 | wakeup-source; |
e0cefb3f YC |
71 | |
72 | muic: max77836-muic { | |
73 | compatible = "maxim,max77836-muic"; | |
74 | }; | |
75 | ||
76 | regulators { | |
77 | compatible = "maxim,max77836-regulator"; | |
78 | safeout_reg: SAFEOUT { | |
79 | regulator-name = "SAFEOUT"; | |
80 | }; | |
81 | ||
82 | charger_reg: CHARGER { | |
83 | regulator-name = "CHARGER"; | |
84 | regulator-min-microamp = <45000>; | |
85 | regulator-max-microamp = <475000>; | |
86 | regulator-boot-on; | |
87 | }; | |
88 | ||
89 | motor_reg: LDO1 { | |
90 | regulator-name = "MOT_2.7V"; | |
91 | regulator-min-microvolt = <1100000>; | |
92 | regulator-max-microvolt = <2700000>; | |
93 | }; | |
94 | ||
95 | LDO2 { | |
96 | regulator-name = "UNUSED_LDO2"; | |
97 | regulator-min-microvolt = <800000>; | |
98 | regulator-max-microvolt = <3950000>; | |
99 | }; | |
100 | }; | |
101 | ||
102 | charger { | |
103 | compatible = "maxim,max77836-charger"; | |
104 | ||
105 | maxim,constant-uvolt = <4350000>; | |
106 | maxim,fast-charge-uamp = <225000>; | |
107 | maxim,eoc-uamp = <7500>; | |
108 | maxim,ovp-uvolt = <6500000>; | |
109 | }; | |
110 | }; | |
111 | }; | |
9ce09a1f JK |
112 | |
113 | haptics { | |
114 | compatible = "regulator-haptic"; | |
115 | haptic-supply = <&motor_reg>; | |
116 | min-microvolt = <1100000>; | |
117 | max-microvolt = <2700000>; | |
118 | }; | |
5600f8cc CC |
119 | |
120 | thermal-zones { | |
121 | cpu_thermal: cpu-thermal { | |
122 | cooling-maps { | |
123 | map0 { | |
124 | /* Correspond to 500MHz at freq_table */ | |
125 | cooling-device = <&cpu0 5 5>; | |
126 | }; | |
127 | map1 { | |
128 | /* Correspond to 200MHz at freq_table */ | |
129 | cooling-device = <&cpu0 8 8>; | |
130 | }; | |
131 | }; | |
132 | }; | |
133 | }; | |
e0cefb3f YC |
134 | }; |
135 | ||
136 | &adc { | |
137 | vdd-supply = <&ldo3_reg>; | |
138 | status = "okay"; | |
139 | assigned-clocks = <&cmu CLK_SCLK_TSADC>; | |
140 | assigned-clock-rates = <6000000>; | |
141 | ||
142 | thermistor-ap { | |
143 | compatible = "ntc,ncp15wb473"; | |
144 | pullup-uv = <1800000>; | |
145 | pullup-ohm = <100000>; | |
146 | pulldown-ohm = <100000>; | |
147 | io-channels = <&adc 0>; | |
148 | }; | |
149 | ||
150 | thermistor-battery { | |
151 | compatible = "ntc,ncp15wb473"; | |
152 | pullup-uv = <1800000>; | |
153 | pullup-ohm = <100000>; | |
154 | pulldown-ohm = <100000>; | |
155 | io-channels = <&adc 1>; | |
156 | }; | |
157 | }; | |
158 | ||
48816aff CC |
159 | &cpu0 { |
160 | cpu0-supply = <&buck2_reg>; | |
161 | }; | |
162 | ||
3fc5f3a5 | 163 | &exynos_usbphy { |
4ae9a4c6 | 164 | vbus-supply = <&safeout_reg>; |
3fc5f3a5 JK |
165 | status = "okay"; |
166 | }; | |
167 | ||
168 | &hsotg { | |
169 | vusb_d-supply = <&ldo15_reg>; | |
170 | vusb_a-supply = <&ldo12_reg>; | |
32f144f2 | 171 | dr_mode = "peripheral"; |
3fc5f3a5 JK |
172 | status = "okay"; |
173 | }; | |
174 | ||
e0cefb3f YC |
175 | &i2c_0 { |
176 | #address-cells = <1>; | |
177 | #size-cells = <0>; | |
178 | samsung,i2c-sda-delay = <100>; | |
179 | samsung,i2c-slave-addr = <0x10>; | |
180 | samsung,i2c-max-bus-freq = <100000>; | |
181 | status = "okay"; | |
182 | ||
183 | s2mps14_pmic@66 { | |
184 | compatible = "samsung,s2mps14-pmic"; | |
185 | interrupt-parent = <&gpx0>; | |
186 | interrupts = <7 0>; | |
187 | reg = <0x66>; | |
36a0282a | 188 | wakeup-source; |
e0cefb3f YC |
189 | |
190 | s2mps14_osc: clocks { | |
191 | compatible = "samsung,s2mps14-clk"; | |
192 | #clock-cells = <1>; | |
193 | clock-output-names = "s2mps14_ap", "unused", | |
194 | "s2mps14_bt"; | |
195 | }; | |
196 | ||
197 | regulators { | |
198 | ldo1_reg: LDO1 { | |
199 | regulator-name = "VAP_ALIVE_1.0V"; | |
200 | regulator-min-microvolt = <1000000>; | |
201 | regulator-max-microvolt = <1000000>; | |
202 | regulator-always-on; | |
203 | }; | |
204 | ||
205 | ldo2_reg: LDO2 { | |
206 | regulator-name = "VAP_M1_1.2V"; | |
207 | regulator-min-microvolt = <1200000>; | |
208 | regulator-max-microvolt = <1200000>; | |
209 | regulator-always-on; | |
210 | }; | |
211 | ||
212 | ldo3_reg: LDO3 { | |
213 | regulator-name = "VCC_AP_1.8V"; | |
214 | regulator-min-microvolt = <1800000>; | |
215 | regulator-max-microvolt = <1800000>; | |
216 | regulator-always-on; | |
217 | }; | |
218 | ||
219 | ldo4_reg: LDO4 { | |
220 | regulator-name = "VAP_AVDD_PLL1"; | |
221 | regulator-min-microvolt = <1800000>; | |
222 | regulator-max-microvolt = <1800000>; | |
223 | regulator-always-on; | |
224 | }; | |
225 | ||
226 | ldo5_reg: LDO5 { | |
227 | regulator-name = "VAP_PLL_ISO_1.0V"; | |
228 | regulator-min-microvolt = <1000000>; | |
229 | regulator-max-microvolt = <1000000>; | |
230 | regulator-always-on; | |
231 | }; | |
232 | ||
233 | ldo6_reg: LDO6 { | |
234 | regulator-name = "VAP_MIPI_1.0V"; | |
235 | regulator-min-microvolt = <1000000>; | |
236 | regulator-max-microvolt = <1000000>; | |
237 | }; | |
238 | ||
239 | ldo7_reg: LDO7 { | |
240 | regulator-name = "VAP_AVDD_1.8V"; | |
241 | regulator-min-microvolt = <1800000>; | |
242 | regulator-max-microvolt = <1800000>; | |
243 | regulator-always-on; | |
244 | }; | |
245 | ||
246 | ldo8_reg: LDO8 { | |
247 | regulator-name = "VAP_USB_3.0V"; | |
248 | regulator-min-microvolt = <3000000>; | |
249 | regulator-max-microvolt = <3000000>; | |
250 | regulator-always-on; | |
251 | }; | |
252 | ||
253 | ldo9_reg: LDO9 { | |
254 | regulator-name = "V_LPDDR_1.2V"; | |
255 | regulator-min-microvolt = <1200000>; | |
256 | regulator-max-microvolt = <1200000>; | |
257 | regulator-always-on; | |
258 | }; | |
259 | ||
260 | ldo10_reg: LDO10 { | |
261 | regulator-name = "UNUSED_LDO10"; | |
262 | regulator-min-microvolt = <1000000>; | |
263 | regulator-max-microvolt = <1000000>; | |
264 | }; | |
265 | ||
266 | ldo11_reg: LDO11 { | |
267 | regulator-name = "V_EMMC_1.8V"; | |
268 | regulator-min-microvolt = <1800000>; | |
269 | regulator-max-microvolt = <1800000>; | |
de77e52d | 270 | samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
271 | }; |
272 | ||
273 | ldo12_reg: LDO12 { | |
274 | regulator-name = "V_EMMC_2.8V"; | |
275 | regulator-min-microvolt = <2800000>; | |
276 | regulator-max-microvolt = <2800000>; | |
de77e52d | 277 | samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
278 | }; |
279 | ||
280 | ldo13_reg: LDO13 { | |
281 | regulator-name = "VSENSOR_2.85V"; | |
282 | regulator-min-microvolt = <2850000>; | |
283 | regulator-max-microvolt = <2850000>; | |
284 | regulator-always-on; | |
285 | }; | |
286 | ||
287 | ldo14_reg: LDO14 { | |
288 | regulator-name = "UNUSED_LDO14"; | |
289 | regulator-min-microvolt = <1800000>; | |
290 | regulator-max-microvolt = <1800000>; | |
291 | }; | |
292 | ||
293 | ldo15_reg: LDO15 { | |
294 | regulator-name = "TSP_AVDD_3.3V"; | |
295 | regulator-min-microvolt = <3300000>; | |
296 | regulator-max-microvolt = <3300000>; | |
297 | }; | |
298 | ||
299 | ldo16_reg: LDO16 { | |
300 | regulator-name = "LCD_VDD_3.3V"; | |
301 | regulator-min-microvolt = <3300000>; | |
302 | regulator-max-microvolt = <3300000>; | |
303 | }; | |
304 | ||
305 | ldo17_reg: LDO17 { | |
306 | regulator-name = "UNUSED_LDO17"; | |
307 | regulator-min-microvolt = <1800000>; | |
308 | regulator-max-microvolt = <1800000>; | |
309 | }; | |
310 | ||
311 | ldo18_reg: LDO18 { | |
312 | regulator-name = "UNUSED_LDO18"; | |
313 | regulator-min-microvolt = <1800000>; | |
314 | regulator-max-microvolt = <1800000>; | |
315 | }; | |
316 | ||
317 | ldo19_reg: LDO19 { | |
318 | regulator-name = "TSP_VDD_1.8V"; | |
319 | regulator-min-microvolt = <1800000>; | |
320 | regulator-max-microvolt = <1800000>; | |
321 | }; | |
322 | ||
323 | ldo20_reg: LDO20 { | |
324 | regulator-name = "LCD_VDD_1.8V"; | |
325 | regulator-min-microvolt = <1800000>; | |
326 | regulator-max-microvolt = <1800000>; | |
327 | }; | |
328 | ||
329 | ldo21_reg: LDO21 { | |
330 | regulator-name = "UNUSED_LDO21"; | |
331 | regulator-min-microvolt = <1000000>; | |
332 | regulator-max-microvolt = <1000000>; | |
333 | }; | |
334 | ||
335 | ldo22_reg: LDO22 { | |
336 | regulator-name = "UNUSED_LDO22"; | |
337 | regulator-min-microvolt = <1000000>; | |
338 | regulator-max-microvolt = <1000000>; | |
339 | }; | |
340 | ||
341 | ldo23_reg: LDO23 { | |
342 | regulator-name = "UNUSED_LDO23"; | |
343 | regulator-min-microvolt = <1000000>; | |
344 | regulator-max-microvolt = <1000000>; | |
345 | regulator-always-on; | |
346 | }; | |
347 | ||
348 | ldo24_reg: LDO24 { | |
349 | regulator-name = "UNUSED_LDO24"; | |
350 | regulator-min-microvolt = <1800000>; | |
351 | regulator-max-microvolt = <1800000>; | |
352 | }; | |
353 | ||
354 | ldo25_reg: LDO25 { | |
355 | regulator-name = "UNUSED_LDO25"; | |
356 | regulator-min-microvolt = <1800000>; | |
357 | regulator-max-microvolt = <1800000>; | |
358 | }; | |
359 | ||
360 | buck1_reg: BUCK1 { | |
361 | regulator-name = "VAP_MIF_1.0V"; | |
362 | regulator-min-microvolt = <800000>; | |
363 | regulator-max-microvolt = <900000>; | |
364 | regulator-always-on; | |
365 | }; | |
366 | ||
367 | buck2_reg: BUCK2 { | |
368 | regulator-name = "VAP_ARM_1.0V"; | |
369 | regulator-min-microvolt = <850000>; | |
370 | regulator-max-microvolt = <1150000>; | |
371 | regulator-always-on; | |
372 | }; | |
373 | ||
374 | buck3_reg: BUCK3 { | |
375 | regulator-name = "VAP_INT3D_1.0V"; | |
376 | regulator-min-microvolt = <850000>; | |
377 | regulator-max-microvolt = <1000000>; | |
378 | regulator-always-on; | |
379 | }; | |
380 | ||
381 | buck4_reg: BUCK4 { | |
382 | regulator-name = "VCC_SUB_1.95V"; | |
383 | regulator-min-microvolt = <1950000>; | |
384 | regulator-max-microvolt = <1950000>; | |
385 | regulator-always-on; | |
386 | }; | |
387 | ||
388 | buck5_reg: BUCK5 { | |
389 | regulator-name = "VCC_SUB_1.35V"; | |
390 | regulator-min-microvolt = <1350000>; | |
391 | regulator-max-microvolt = <1350000>; | |
392 | regulator-always-on; | |
393 | }; | |
394 | }; | |
395 | }; | |
396 | }; | |
397 | ||
398 | &i2c_1 { | |
399 | #address-cells = <1>; | |
400 | #size-cells = <0>; | |
401 | samsung,i2c-sda-delay = <100>; | |
402 | samsung,i2c-slave-addr = <0x10>; | |
403 | samsung,i2c-max-bus-freq = <400000>; | |
404 | status = "okay"; | |
405 | ||
406 | fuelgauge@36 { | |
407 | compatible = "maxim,max77836-battery"; | |
408 | interrupt-parent = <&gpx1>; | |
409 | interrupts = <2 8>; | |
410 | reg = <0x36>; | |
411 | }; | |
412 | }; | |
413 | ||
414 | &i2s2 { | |
415 | status = "okay"; | |
416 | }; | |
417 | ||
418 | &mshc_0 { | |
419 | #address-cells = <1>; | |
420 | #size-cells = <0>; | |
421 | num-slots = <1>; | |
422 | broken-cd; | |
423 | non-removable; | |
424 | cap-mmc-highspeed; | |
425 | desc-num = <4>; | |
426 | mmc-hs200-1_8v; | |
427 | card-detect-delay = <200>; | |
428 | vmmc-supply = <&vemmc_reg>; | |
429 | clock-frequency = <100000000>; | |
430 | clock-freq-min-max = <400000 100000000>; | |
431 | samsung,dw-mshc-ciu-div = <1>; | |
432 | samsung,dw-mshc-sdr-timing = <0 1>; | |
433 | samsung,dw-mshc-ddr-timing = <1 2>; | |
434 | pinctrl-names = "default"; | |
435 | pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; | |
436 | bus-width = <8>; | |
437 | status = "okay"; | |
438 | }; | |
439 | ||
440 | &serial_0 { | |
441 | assigned-clocks = <&cmu CLK_SCLK_UART0>; | |
442 | assigned-clock-rates = <100000000>; | |
443 | status = "okay"; | |
444 | }; | |
445 | ||
446 | &serial_1 { | |
447 | status = "okay"; | |
448 | }; | |
449 | ||
450 | &tmu { | |
451 | vtmu-supply = <&ldo7_reg>; | |
452 | status = "okay"; | |
453 | }; | |
454 | ||
455 | &rtc { | |
c5abf619 | 456 | clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; |
e0cefb3f YC |
457 | clock-names = "rtc", "rtc_src"; |
458 | status = "okay"; | |
459 | }; | |
460 | ||
8d6b9b46 CC |
461 | &ppmu_dmc0 { |
462 | status = "okay"; | |
463 | ||
464 | events { | |
465 | ppmu_dmc0_3: ppmu-event3-dmc0 { | |
466 | event-name = "ppmu-event3-dmc0"; | |
467 | }; | |
468 | }; | |
469 | }; | |
470 | ||
471 | &ppmu_dmc1 { | |
472 | status = "okay"; | |
473 | ||
474 | events { | |
475 | ppmu_dmc1_3: ppmu-event3-dmc1 { | |
476 | event-name = "ppmu-event3-dmc1"; | |
477 | }; | |
478 | }; | |
479 | }; | |
480 | ||
481 | &ppmu_leftbus { | |
482 | status = "okay"; | |
483 | ||
484 | events { | |
485 | ppmu_leftbus_3: ppmu-event3-leftbus { | |
486 | event-name = "ppmu-event3-leftbus"; | |
487 | }; | |
488 | }; | |
489 | }; | |
490 | ||
491 | &ppmu_rightbus { | |
492 | status = "okay"; | |
493 | ||
494 | events { | |
495 | ppmu_rightbus_3: ppmu-event3-rightbus { | |
496 | event-name = "ppmu-event3-rightbus"; | |
497 | }; | |
498 | }; | |
499 | }; | |
500 | ||
e0cefb3f YC |
501 | &xusbxti { |
502 | clock-frequency = <24000000>; | |
503 | }; | |
504 | ||
505 | &pinctrl_0 { | |
506 | pinctrl-names = "default"; | |
507 | pinctrl-0 = <&sleep0>; | |
508 | ||
509 | sleep0: sleep-state { | |
510 | PIN_SLP(gpa0-0, INPUT, DOWN); | |
511 | PIN_SLP(gpa0-1, INPUT, DOWN); | |
512 | PIN_SLP(gpa0-2, INPUT, DOWN); | |
513 | PIN_SLP(gpa0-3, INPUT, DOWN); | |
514 | PIN_SLP(gpa0-4, INPUT, DOWN); | |
515 | PIN_SLP(gpa0-5, INPUT, DOWN); | |
516 | PIN_SLP(gpa0-6, INPUT, DOWN); | |
517 | PIN_SLP(gpa0-7, INPUT, DOWN); | |
518 | ||
519 | PIN_SLP(gpa1-0, INPUT, DOWN); | |
520 | PIN_SLP(gpa1-1, INPUT, DOWN); | |
521 | PIN_SLP(gpa1-2, INPUT, DOWN); | |
522 | PIN_SLP(gpa1-3, INPUT, DOWN); | |
523 | PIN_SLP(gpa1-4, INPUT, DOWN); | |
524 | PIN_SLP(gpa1-5, INPUT, DOWN); | |
525 | ||
526 | PIN_SLP(gpb-0, PREV, NONE); | |
527 | PIN_SLP(gpb-1, PREV, NONE); | |
528 | PIN_SLP(gpb-2, PREV, NONE); | |
529 | PIN_SLP(gpb-3, PREV, NONE); | |
530 | PIN_SLP(gpb-4, INPUT, DOWN); | |
531 | PIN_SLP(gpb-5, INPUT, DOWN); | |
532 | PIN_SLP(gpb-6, INPUT, DOWN); | |
533 | PIN_SLP(gpb-7, INPUT, DOWN); | |
534 | ||
535 | PIN_SLP(gpc0-0, INPUT, DOWN); | |
536 | PIN_SLP(gpc0-1, INPUT, DOWN); | |
537 | PIN_SLP(gpc0-2, INPUT, DOWN); | |
538 | PIN_SLP(gpc0-3, INPUT, DOWN); | |
539 | PIN_SLP(gpc0-4, INPUT, DOWN); | |
540 | ||
541 | PIN_SLP(gpc1-0, INPUT, DOWN); | |
542 | PIN_SLP(gpc1-1, INPUT, DOWN); | |
543 | PIN_SLP(gpc1-2, INPUT, DOWN); | |
544 | PIN_SLP(gpc1-3, INPUT, DOWN); | |
545 | PIN_SLP(gpc1-4, INPUT, DOWN); | |
546 | ||
547 | PIN_SLP(gpd0-0, INPUT, DOWN); | |
548 | PIN_SLP(gpd0-1, INPUT, DOWN); | |
549 | PIN_SLP(gpd0-2, INPUT, NONE); | |
550 | PIN_SLP(gpd0-3, INPUT, NONE); | |
551 | ||
552 | PIN_SLP(gpd1-0, INPUT, NONE); | |
553 | PIN_SLP(gpd1-1, INPUT, NONE); | |
554 | PIN_SLP(gpd1-2, INPUT, NONE); | |
555 | PIN_SLP(gpd1-3, INPUT, NONE); | |
556 | }; | |
557 | }; | |
558 | ||
559 | &pinctrl_1 { | |
560 | pinctrl-names = "default"; | |
561 | pinctrl-0 = <&sleep1>; | |
562 | ||
563 | sleep1: sleep-state { | |
564 | PIN_SLP(gpe0-0, PREV, NONE); | |
565 | PIN_SLP(gpe0-1, PREV, NONE); | |
566 | PIN_SLP(gpe0-2, INPUT, DOWN); | |
567 | PIN_SLP(gpe0-3, INPUT, DOWN); | |
568 | PIN_SLP(gpe0-4, PREV, NONE); | |
569 | PIN_SLP(gpe0-5, INPUT, DOWN); | |
570 | PIN_SLP(gpe0-6, INPUT, DOWN); | |
571 | PIN_SLP(gpe0-7, INPUT, DOWN); | |
572 | ||
573 | PIN_SLP(gpe1-0, INPUT, DOWN); | |
574 | PIN_SLP(gpe1-1, PREV, NONE); | |
575 | PIN_SLP(gpe1-2, INPUT, DOWN); | |
576 | PIN_SLP(gpe1-3, INPUT, DOWN); | |
577 | PIN_SLP(gpe1-4, INPUT, DOWN); | |
578 | PIN_SLP(gpe1-5, INPUT, DOWN); | |
579 | PIN_SLP(gpe1-6, INPUT, DOWN); | |
580 | PIN_SLP(gpe1-7, INPUT, NONE); | |
581 | ||
582 | PIN_SLP(gpe2-0, INPUT, NONE); | |
583 | PIN_SLP(gpe2-1, INPUT, NONE); | |
584 | PIN_SLP(gpe2-2, INPUT, NONE); | |
585 | ||
586 | PIN_SLP(gpk0-0, INPUT, DOWN); | |
587 | PIN_SLP(gpk0-1, INPUT, DOWN); | |
588 | PIN_SLP(gpk0-2, OUT0, NONE); | |
589 | PIN_SLP(gpk0-3, INPUT, DOWN); | |
590 | PIN_SLP(gpk0-4, INPUT, DOWN); | |
591 | PIN_SLP(gpk0-5, INPUT, DOWN); | |
592 | PIN_SLP(gpk0-6, INPUT, DOWN); | |
593 | PIN_SLP(gpk0-7, INPUT, DOWN); | |
594 | ||
595 | PIN_SLP(gpk1-0, PREV, NONE); | |
596 | PIN_SLP(gpk1-1, PREV, NONE); | |
597 | PIN_SLP(gpk1-2, INPUT, DOWN); | |
598 | PIN_SLP(gpk1-3, PREV, NONE); | |
599 | PIN_SLP(gpk1-4, PREV, NONE); | |
600 | PIN_SLP(gpk1-5, PREV, NONE); | |
601 | PIN_SLP(gpk1-6, PREV, NONE); | |
602 | ||
603 | PIN_SLP(gpk2-0, INPUT, DOWN); | |
604 | PIN_SLP(gpk2-1, INPUT, DOWN); | |
605 | PIN_SLP(gpk2-2, INPUT, DOWN); | |
606 | PIN_SLP(gpk2-3, INPUT, DOWN); | |
607 | PIN_SLP(gpk2-4, INPUT, DOWN); | |
608 | PIN_SLP(gpk2-5, INPUT, DOWN); | |
609 | PIN_SLP(gpk2-6, INPUT, DOWN); | |
610 | ||
611 | PIN_SLP(gpl0-0, INPUT, DOWN); | |
612 | PIN_SLP(gpl0-1, INPUT, DOWN); | |
613 | PIN_SLP(gpl0-2, INPUT, DOWN); | |
614 | PIN_SLP(gpl0-3, INPUT, DOWN); | |
615 | ||
616 | PIN_SLP(gpm0-0, INPUT, DOWN); | |
617 | PIN_SLP(gpm0-1, INPUT, DOWN); | |
618 | PIN_SLP(gpm0-2, INPUT, DOWN); | |
619 | PIN_SLP(gpm0-3, INPUT, DOWN); | |
620 | PIN_SLP(gpm0-4, INPUT, DOWN); | |
621 | PIN_SLP(gpm0-5, INPUT, DOWN); | |
622 | PIN_SLP(gpm0-6, INPUT, DOWN); | |
623 | PIN_SLP(gpm0-7, INPUT, DOWN); | |
624 | ||
625 | PIN_SLP(gpm1-0, INPUT, DOWN); | |
626 | PIN_SLP(gpm1-1, INPUT, DOWN); | |
627 | PIN_SLP(gpm1-2, INPUT, DOWN); | |
628 | PIN_SLP(gpm1-3, INPUT, DOWN); | |
629 | PIN_SLP(gpm1-4, INPUT, DOWN); | |
630 | PIN_SLP(gpm1-5, INPUT, DOWN); | |
631 | PIN_SLP(gpm1-6, INPUT, DOWN); | |
632 | ||
633 | PIN_SLP(gpm2-0, INPUT, DOWN); | |
634 | PIN_SLP(gpm2-1, INPUT, DOWN); | |
635 | PIN_SLP(gpm2-2, INPUT, DOWN); | |
636 | PIN_SLP(gpm2-3, INPUT, DOWN); | |
637 | PIN_SLP(gpm2-4, INPUT, DOWN); | |
638 | ||
639 | PIN_SLP(gpm3-0, INPUT, DOWN); | |
640 | PIN_SLP(gpm3-1, INPUT, DOWN); | |
641 | PIN_SLP(gpm3-2, INPUT, DOWN); | |
642 | PIN_SLP(gpm3-3, INPUT, DOWN); | |
643 | PIN_SLP(gpm3-4, INPUT, DOWN); | |
644 | PIN_SLP(gpm3-5, INPUT, DOWN); | |
645 | PIN_SLP(gpm3-6, INPUT, DOWN); | |
646 | PIN_SLP(gpm3-7, INPUT, DOWN); | |
647 | ||
648 | PIN_SLP(gpm4-0, INPUT, DOWN); | |
649 | PIN_SLP(gpm4-1, INPUT, DOWN); | |
650 | PIN_SLP(gpm4-2, INPUT, DOWN); | |
651 | PIN_SLP(gpm4-3, INPUT, DOWN); | |
652 | PIN_SLP(gpm4-4, INPUT, DOWN); | |
653 | PIN_SLP(gpm4-5, INPUT, DOWN); | |
654 | PIN_SLP(gpm4-6, INPUT, DOWN); | |
655 | PIN_SLP(gpm4-7, INPUT, DOWN); | |
656 | }; | |
657 | }; |