[linux-2.6-block.git] / arch / arm / boot / dts / dra72-evm-common.dtsi

/*
 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/ti-dra7-atl.h>

/ {
	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";

	aliases {
		display0 = &hdmi0;
	};

	chosen {
		stdout-path = &uart1;
	};

	evm_12v0: fixedregulator-evm12v0 {
		/* main supply */
		compatible = "regulator-fixed";
		regulator-name = "evm_12v0";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	evm_5v0: fixedregulator-evm5v0 {
		/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
		/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
		compatible = "regulator-fixed";
		regulator-name = "evm_5v0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&evm_12v0>;
		regulator-always-on;
		regulator-boot-on;
	};

	evm_3v6: fixedregulator-evm_3v6 {
		compatible = "regulator-fixed";
		regulator-name = "evm_3v6";
		regulator-min-microvolt = <3600000>;
		regulator-max-microvolt = <3600000>;
		vin-supply = <&evm_5v0>;
		regulator-always-on;
		regulator-boot-on;
	};

	vsys_3v3: fixedregulator-vsys3v3 {
		/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
		/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
		compatible = "regulator-fixed";
		regulator-name = "vsys_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&evm_12v0>;
		regulator-always-on;
		regulator-boot-on;
	};

	evm_3v3_sw: fixedregulator-evm_3v3 {
		/* TPS22965DSG */
		compatible = "regulator-fixed";
		regulator-name = "evm_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vsys_3v3>;
		regulator-always-on;
		regulator-boot-on;
	};

	aic_dvdd: fixedregulator-aic_dvdd {
		/* TPS77018DBVT */
		compatible = "regulator-fixed";
		regulator-name = "aic_dvdd";
		vin-supply = <&evm_3v3_sw>;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	evm_3v3_sd: fixedregulator-sd {
		compatible = "regulator-fixed";
		regulator-name = "evm_3v3_sd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&evm_3v3_sw>;
		enable-active-high;
		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
	};

	extcon_usb1: extcon_usb1 {
		compatible = "linux,extcon-usb-gpio";
		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
	};

	extcon_usb2: extcon_usb2 {
		compatible = "linux,extcon-usb-gpio";
		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
	};

	hdmi0: connector {
		compatible = "hdmi-connector";
		label = "hdmi";

		type = "a";

		port {
			hdmi_connector_in: endpoint {
				remote-endpoint = <&tpd12s015_out>;
			};
		};
	};

	tpd12s015: encoder {
		compatible = "ti,tpd12s015";

		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tpd12s015_in: endpoint {
					remote-endpoint = <&hdmi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tpd12s015_out: endpoint {
					remote-endpoint = <&hdmi_connector_in>;
				};
			};
		};
	};

	sound0: sound0 {
		compatible = "simple-audio-card";
		simple-audio-card,name = "DRA7xx-EVM";
		simple-audio-card,widgets =
			"Headphone", "Headphone Jack",
			"Line", "Line Out",
			"Microphone", "Mic Jack",
			"Line", "Line In";
		simple-audio-card,routing =
			"Headphone Jack",       "HPLOUT",
			"Headphone Jack",       "HPROUT",
			"Line Out",		"LLOUT",
			"Line Out",		"RLOUT",
			"MIC3L",		"Mic Jack",
			"MIC3R",		"Mic Jack",
			"Mic Jack",		"Mic Bias",
			"LINE1L",               "Line In",
			"LINE1R",               "Line In";
		simple-audio-card,format = "dsp_b";
		simple-audio-card,bitclock-master = <&sound0_master>;
		simple-audio-card,frame-master = <&sound0_master>;
		simple-audio-card,bitclock-inversion;

		sound0_master: simple-audio-card,cpu {
			sound-dai = <&mcasp3>;
			system-clock-frequency = <5644800>;
		};

		simple-audio-card,codec {
			sound-dai = <&tlv320aic3106>;
			clocks = <&atl_clkin2_ck>;
		};
	};

	vmmcwl_fixed: fixedregulator-mmcwl {
		compatible = "regulator-fixed";
		regulator-name = "vmmcwl_fixed";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&dra7_pmx_core {
	dcan1_pins_default: dcan1_pins_default {
		pinctrl-single,pins = <
			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
		>;
	};

	dcan1_pins_sleep: dcan1_pins_sleep {
		pinctrl-single,pins = <
			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
		>;
	};
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	pcf_lcd: gpio@20 {
		compatible = "nxp,pcf8575";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};

	pcf_gpio_21: gpio@21 {
		compatible = "ti,pcf8575", "nxp,pcf8575";
		reg = <0x21>;
		lines-initial-states = <0x1408>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};

	tlv320aic3106: tlv320aic3106@19 {
		#sound-dai-cells = <0>;
		compatible = "ti,tlv320aic3106";
		reg = <0x19>;
		adc-settle-ms = <40>;
		ai3x-micbias-vg = <1>;		/* 2.0V */
		status = "okay";

		/* Regulators */
		AVDD-supply = <&evm_3v3_sw>;
		IOVDD-supply = <&evm_3v3_sw>;
		DRVDD-supply = <&evm_3v3_sw>;
		DVDD-supply = <&aic_dvdd>;
	};
};

&i2c5 {
	status = "okay";
	clock-frequency = <400000>;

	pcf_hdmi: pcf8575@26 {
		compatible = "ti,pcf8575", "nxp,pcf8575";
		reg = <0x26>;
		gpio-controller;
		#gpio-cells = <2>;
		/*
		 * initial state is used here to keep the mdio interface
		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
		 * VIN2_S0 driven high otherwise Ethernet stops working
		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
		 */
		lines-initial-states = <0x0f2b>;

		p1 {
			/* vin6_sel_s0: high: VIN6, low: audio */
			gpio-hog;
			gpios = <1 GPIO_ACTIVE_HIGH>;
			output-low;
			line-name = "vin6_sel_s0";
		};
	};
};

&uart1 {
	status = "okay";
	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
			      <&dra7_pmx_core 0x3e0>;
};

&elm {
	status = "okay";
};

&gpmc {
	/*
	 * For the existing IOdelay configuration via U-Boot we don't
	 * support NAND on dra72-evm. Keep it disabled. Enabling it
	 * requires a different configuration by U-Boot.
	 */
	status = "disabled";
	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
	nand@0,0 {
		/* To use NAND, DIP switch SW5 must be set like so:
		 * SW5.1 (NAND_SELn) = ON (LOW)
		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
		 */
		compatible = "ti,omap2-nand";
		reg = <0 0 4>;		/* device IO registers */
		interrupt-parent = <&gpmc>;
		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
			     <1 IRQ_TYPE_NONE>;	/* termcount */
		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
		ti,nand-xfer-type = "prefetch-dma";
		ti,nand-ecc-opt = "bch8";
		ti,elm-id = <&elm>;
		nand-bus-width = <16>;
		gpmc,device-width = <2>;
		gpmc,sync-clk-ps = <0>;
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <80>;
		gpmc,cs-wr-off-ns = <80>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <60>;
		gpmc,adv-wr-off-ns = <60>;
		gpmc,we-on-ns = <10>;
		gpmc,we-off-ns = <50>;
		gpmc,oe-on-ns = <4>;
		gpmc,oe-off-ns = <40>;
		gpmc,access-ns = <40>;
		gpmc,wr-access-ns = <80>;
		gpmc,rd-cycle-ns = <80>;
		gpmc,wr-cycle-ns = <80>;
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,clk-activation-ns = <0>;
		gpmc,wr-data-mux-bus-ns = <0>;
		/* MTD partition table */
		/* All SPL-* partitions are sized to minimal length
		 * which can be independently programmable. For
		 * NAND flash this is equal to size of erase-block */
		#address-cells = <1>;
		#size-cells = <1>;
		partition@0 {
			label = "NAND.SPL";
			reg = <0x00000000 0x000020000>;
		};
		partition@1 {
			label = "NAND.SPL.backup1";
			reg = <0x00020000 0x00020000>;
		};
		partition@2 {
			label = "NAND.SPL.backup2";
			reg = <0x00040000 0x00020000>;
		};
		partition@3 {
			label = "NAND.SPL.backup3";
			reg = <0x00060000 0x00020000>;
		};
		partition@4 {
			label = "NAND.u-boot-spl-os";
			reg = <0x00080000 0x00040000>;
		};
		partition@5 {
			label = "NAND.u-boot";
			reg = <0x000c0000 0x00100000>;
		};
		partition@6 {
			label = "NAND.u-boot-env";
			reg = <0x001c0000 0x00020000>;
		};
		partition@7 {
			label = "NAND.u-boot-env.backup1";
			reg = <0x001e0000 0x00020000>;
		};
		partition@8 {
			label = "NAND.kernel";
			reg = <0x00200000 0x00800000>;
		};
		partition@9 {
			label = "NAND.file-system";
			reg = <0x00a00000 0x0f600000>;
		};
	};
};

&omap_dwc3_1 {
	extcon = <&extcon_usb1>;
};

&omap_dwc3_2 {
	extcon = <&extcon_usb2>;
};

&usb1 {
	dr_mode = "otg";
	extcon = <&extcon_usb1>;
};

&usb2 {
	dr_mode = "host";
	extcon = <&extcon_usb2>;
};

&mmc1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins_default>;
	vmmc-supply = <&evm_3v3_sd>;
	bus-width = <4>;
	/*
	 * SDCD signal is not being used here - using the fact that GPIO mode
	 * is a viable alternative
	 */
	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
	max-frequency = <192000000>;
};

&mmc2 {
	/* SW5-3 in ON position */
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins_default>;
	bus-width = <8>;
	non-removable;
	max-frequency = <192000000>;
};

&mmc4 {
	status = "okay";
	vmmc-supply = <&evm_3v6>;
	vqmmc-supply = <&vmmcwl_fixed>;
	bus-width = <4>;
	cap-power-off-card;
	keep-power-in-suspend;
	non-removable;
	pinctrl-names = "default", "hs", "sdr12", "sdr25";
	pinctrl-0 = <&mmc4_pins_default>;
	pinctrl-1 = <&mmc4_pins_default>;
	pinctrl-2 = <&mmc4_pins_default>;
	pinctrl-3 = <&mmc4_pins_default>;
	#address-cells = <1>;
	#size-cells = <0>;
	wifi@2 {
		compatible = "ti,wl1835";
		reg = <2>;
		interrupt-parent = <&gpio5>;
		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
	};
};

&mac {
	status = "okay";
};

&dcan1 {
	status = "ok";
	pinctrl-names = "default", "sleep", "active";
	pinctrl-0 = <&dcan1_pins_sleep>;
	pinctrl-1 = <&dcan1_pins_sleep>;
	pinctrl-2 = <&dcan1_pins_default>;
};

&qspi {
	status = "okay";

	spi-max-frequency = <76800000>;
	m25p80@0 {
		compatible = "s25fl256s1";
		spi-max-frequency = <76800000>;
		reg = <0>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		#address-cells = <1>;
		#size-cells = <1>;

		/* MTD partition table.
		 * The ROM checks the first four physical blocks
		 * for a valid file to boot and the flash here is
		 * 64KiB block size.
		 */
		partition@0 {
			label = "QSPI.SPL";
			reg = <0x00000000 0x000010000>;
		};
		partition@1 {
			label = "QSPI.SPL.backup1";
			reg = <0x00010000 0x00010000>;
		};
		partition@2 {
			label = "QSPI.SPL.backup2";
			reg = <0x00020000 0x00010000>;
		};
		partition@3 {
			label = "QSPI.SPL.backup3";
			reg = <0x00030000 0x00010000>;
		};
		partition@4 {
			label = "QSPI.u-boot";
			reg = <0x00040000 0x00100000>;
		};
		partition@5 {
			label = "QSPI.u-boot-spl-os";
			reg = <0x00140000 0x00080000>;
		};
		partition@6 {
			label = "QSPI.u-boot-env";
			reg = <0x001c0000 0x00010000>;
		};
		partition@7 {
			label = "QSPI.u-boot-env.backup1";
			reg = <0x001d0000 0x0010000>;
		};
		partition@8 {
			label = "QSPI.kernel";
			reg = <0x001e0000 0x0800000>;
		};
		partition@9 {
			label = "QSPI.file-system";
			reg = <0x009e0000 0x01620000>;
		};
	};
};

&dss {
	status = "ok";
};

&hdmi {
	status = "ok";

	port {
		hdmi_out: endpoint {
			remote-endpoint = <&tpd12s015_in>;
		};
	};
};

&atl {
	assigned-clocks = <&abe_dpll_sys_clk_mux>,
			  <&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
			  <&dpll_abe_ck>,
			  <&dpll_abe_m2x2_ck>,
			  <&atl_clkin2_ck>;
	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;

	status = "okay";

	atl2 {
		bws = <DRA7_ATL_WS_MCASP2_FSX>;
		aws = <DRA7_ATL_WS_MCASP3_FSX>;
	};
};

&mcasp3 {
	#sound-dai-cells = <0>;

	assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
	assigned-clock-parents = <&atl_clkin2_ck>;

	status = "okay";

	op-mode = <0>;          /* MCASP_IIS_MODE */
	tdm-slots = <2>;
	/* 4 serializer */
	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
		1 2 0 0
	>;
	tx-num-evt = <32>;
	rx-num-evt = <32>;
};

&mailbox5 {
	status = "okay";
	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
		status = "okay";
	};
	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
		status = "okay";
	};
};

&mailbox6 {
	status = "okay";
	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
		status = "okay";
	};
};

&pcie1_rc {
	status = "okay";
};
Commit	Line	Data
a4240d3a NM	1	/*
	2	* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8	/dts-v1/;
	9
	10	#include "dra72x.dtsi"
	11	#include <dt-bindings/gpio/gpio.h>
	12	#include <dt-bindings/clk/ti-dra7-atl.h>
	13
	14	/ {
	15	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
	16
	17	aliases {
	18	display0 = &hdmi0;
	19	};
	20
220fbc13 LV	21	chosen {
	22	stdout-path = &uart1;
	23	};
	24
e9a05fbd LV	25	evm_12v0: fixedregulator-evm12v0 {
	26	/* main supply */
	27	compatible = "regulator-fixed";
	28	regulator-name = "evm_12v0";
	29	regulator-min-microvolt = <12000000>;
	30	regulator-max-microvolt = <12000000>;
	31	regulator-always-on;
	32	regulator-boot-on;
	33	};
	34
	35	evm_5v0: fixedregulator-evm5v0 {
6eebfeb9 NM	36	/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
6eebfeb9 NM	37	/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
e9a05fbd LV	38	compatible = "regulator-fixed";
	39	regulator-name = "evm_5v0";
	40	regulator-min-microvolt = <5000000>;
	41	regulator-max-microvolt = <5000000>;
	42	vin-supply = <&evm_12v0>;
	43	regulator-always-on;
	44	regulator-boot-on;
	45	};
	46
70539a52 HN	47	evm_3v6: fixedregulator-evm_3v6 {
	48	compatible = "regulator-fixed";
	49	regulator-name = "evm_3v6";
	50	regulator-min-microvolt = <3600000>;
	51	regulator-max-microvolt = <3600000>;
	52	vin-supply = <&evm_5v0>;
	53	regulator-always-on;
	54	regulator-boot-on;
	55	};
	56
e9a05fbd	57	vsys_3v3: fixedregulator-vsys3v3 {
6eebfeb9 NM	58	/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
6eebfeb9 NM	59	/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
e9a05fbd LV	60	compatible = "regulator-fixed";
	61	regulator-name = "vsys_3v3";
	62	regulator-min-microvolt = <3300000>;
	63	regulator-max-microvolt = <3300000>;
	64	vin-supply = <&evm_12v0>;
	65	regulator-always-on;
	66	regulator-boot-on;
	67	};
	68
7172e745	69	evm_3v3_sw: fixedregulator-evm_3v3 {
e9a05fbd	70	/* TPS22965DSG */
a4240d3a NM	71	compatible = "regulator-fixed";
	72	regulator-name = "evm_3v3";
	73	regulator-min-microvolt = <3300000>;
	74	regulator-max-microvolt = <3300000>;
e9a05fbd LV	75	vin-supply = <&vsys_3v3>;
	76	regulator-always-on;
	77	regulator-boot-on;
a4240d3a NM	78	};
	79
	80	aic_dvdd: fixedregulator-aic_dvdd {
	81	/* TPS77018DBVT */
	82	compatible = "regulator-fixed";
	83	regulator-name = "aic_dvdd";
7172e745	84	vin-supply = <&evm_3v3_sw>;
a4240d3a NM	85	regulator-min-microvolt = <1800000>;
	86	regulator-max-microvolt = <1800000>;
	87	};
	88
	89	evm_3v3_sd: fixedregulator-sd {
	90	compatible = "regulator-fixed";
	91	regulator-name = "evm_3v3_sd";
	92	regulator-min-microvolt = <3300000>;
	93	regulator-max-microvolt = <3300000>;
e9a05fbd	94	vin-supply = <&evm_3v3_sw>;
a4240d3a NM	95	enable-active-high;
	96	gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
	97	};
	98
	99	extcon_usb1: extcon_usb1 {
	100	compatible = "linux,extcon-usb-gpio";
	101	id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
	102	};
	103
	104	extcon_usb2: extcon_usb2 {
	105	compatible = "linux,extcon-usb-gpio";
	106	id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
	107	};
	108
	109	hdmi0: connector {
	110	compatible = "hdmi-connector";
	111	label = "hdmi";
	112
	113	type = "a";
	114
	115	port {
	116	hdmi_connector_in: endpoint {
	117	remote-endpoint = <&tpd12s015_out>;
	118	};
	119	};
	120	};
	121
	122	tpd12s015: encoder {
	123	compatible = "ti,tpd12s015";
	124
a4240d3a NM	125	gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
	126	<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
	127	<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
	128
	129	ports {
	130	#address-cells = <1>;
	131	#size-cells = <0>;
	132
	133	port@0 {
	134	reg = <0>;
	135
	136	tpd12s015_in: endpoint {
	137	remote-endpoint = <&hdmi_out>;
	138	};
	139	};
	140
	141	port@1 {
	142	reg = <1>;
	143
	144	tpd12s015_out: endpoint {
	145	remote-endpoint = <&hdmi_connector_in>;
	146	};
	147	};
	148	};
	149	};
	150
	151	sound0: sound0 {
	152	compatible = "simple-audio-card";
	153	simple-audio-card,name = "DRA7xx-EVM";
	154	simple-audio-card,widgets =
	155	"Headphone", "Headphone Jack",
	156	"Line", "Line Out",
	157	"Microphone", "Mic Jack",
	158	"Line", "Line In";
	159	simple-audio-card,routing =
	160	"Headphone Jack", "HPLOUT",
	161	"Headphone Jack", "HPROUT",
	162	"Line Out", "LLOUT",
	163	"Line Out", "RLOUT",
	164	"MIC3L", "Mic Jack",
	165	"MIC3R", "Mic Jack",
	166	"Mic Jack", "Mic Bias",
	167	"LINE1L", "Line In",
	168	"LINE1R", "Line In";
	169	simple-audio-card,format = "dsp_b";
	170	simple-audio-card,bitclock-master = <&sound0_master>;
	171	simple-audio-card,frame-master = <&sound0_master>;
	172	simple-audio-card,bitclock-inversion;
	173
	174	sound0_master: simple-audio-card,cpu {
	175	sound-dai = <&mcasp3>;
	176	system-clock-frequency = <5644800>;
	177	};
	178
	179	simple-audio-card,codec {
	180	sound-dai = <&tlv320aic3106>;
	181	clocks = <&atl_clkin2_ck>;
	182	};
	183	};
70539a52 HN	184
	185	vmmcwl_fixed: fixedregulator-mmcwl {
	186	compatible = "regulator-fixed";
	187	regulator-name = "vmmcwl_fixed";
	188	regulator-min-microvolt = <1800000>;
	189	regulator-max-microvolt = <1800000>;
	190	gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
	191	enable-active-high;
	192	};
a4240d3a NM	193	};
	194
	195	&dra7_pmx_core {
a4240d3a NM	196	dcan1_pins_default: dcan1_pins_default {
	197	pinctrl-single,pins = <
	198	DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP \| MUX_MODE0) /* dcan1_tx */
	199	DRA7XX_CORE_IOPAD(0x3818, PULL_UP \| MUX_MODE1) /* wakeup0.dcan1_rx */
	200	>;
	201	};
	202
	203	dcan1_pins_sleep: dcan1_pins_sleep {
	204	pinctrl-single,pins = <
	205	DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 \| PULL_UP) /* dcan1_tx.off */
	206	DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 \| PULL_UP) /* wakeup0.off */
	207	>;
	208	};
a4240d3a NM	209	};
	210
	211	&i2c1 {
	212	status = "okay";
a4240d3a NM	213	clock-frequency = <400000>;
a4240d3a NM	214
d8e166b4 TV	215	pcf_lcd: gpio@20 {
	216	compatible = "nxp,pcf8575";
	217	reg = <0x20>;
	218	gpio-controller;
	219	#gpio-cells = <2>;
	220	interrupt-controller;
	221	#interrupt-cells = <2>;
	222	};
	223
a4240d3a	224	pcf_gpio_21: gpio@21 {
86f196f8	225	compatible = "ti,pcf8575", "nxp,pcf8575";
a4240d3a NM	226	reg = <0x21>;
	227	lines-initial-states = <0x1408>;
	228	gpio-controller;
	229	#gpio-cells = <2>;
	230	interrupt-controller;
	231	#interrupt-cells = <2>;
	232	};
	233
	234	tlv320aic3106: tlv320aic3106@19 {
	235	#sound-dai-cells = <0>;
	236	compatible = "ti,tlv320aic3106";
	237	reg = <0x19>;
	238	adc-settle-ms = <40>;
	239	ai3x-micbias-vg = <1>; /* 2.0V */
	240	status = "okay";
	241
	242	/* Regulators */
7172e745 MLC	243	AVDD-supply = <&evm_3v3_sw>;
	244	IOVDD-supply = <&evm_3v3_sw>;
	245	DRVDD-supply = <&evm_3v3_sw>;
a4240d3a NM	246	DVDD-supply = <&aic_dvdd>;
	247	};
	248	};
	249
	250	&i2c5 {
	251	status = "okay";
a4240d3a NM	252	clock-frequency = <400000>;
	253
	254	pcf_hdmi: pcf8575@26 {
86f196f8	255	compatible = "ti,pcf8575", "nxp,pcf8575";
a4240d3a NM	256	reg = <0x26>;
	257	gpio-controller;
	258	#gpio-cells = <2>;
	259	/*
	260	* initial state is used here to keep the mdio interface
	261	* selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
	262	* VIN2_S0 driven high otherwise Ethernet stops working
	263	* VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
	264	*/
	265	lines-initial-states = <0x0f2b>;
	266
	267	p1 {
	268	/* vin6_sel_s0: high: VIN6, low: audio */
	269	gpio-hog;
	270	gpios = <1 GPIO_ACTIVE_HIGH>;
	271	output-low;
	272	line-name = "vin6_sel_s0";
	273	};
	274	};
	275	};
	276
	277	&uart1 {
	278	status = "okay";
	279	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
	280	<&dra7_pmx_core 0x3e0>;
	281	};
	282
	283	&elm {
	284	status = "okay";
	285	};
	286
	287	&gpmc {
1a8eca7f SN	288	/*
	289	* For the existing IOdelay configuration via U-Boot we don't
	290	* support NAND on dra72-evm. Keep it disabled. Enabling it
	291	* requires a different configuration by U-Boot.
	292	*/
	293	status = "disabled";
a4240d3a NM	294	ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
	295	nand@0,0 {
	296	/* To use NAND, DIP switch SW5 must be set like so:
	297	* SW5.1 (NAND_SELn) = ON (LOW)
	298	* SW5.9 (GPMC_WPN) = OFF (HIGH)
	299	*/
	300	compatible = "ti,omap2-nand";
	301	reg = <0 0 4>; /* device IO registers */
	302	interrupt-parent = <&gpmc>;
	303	interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
	304	<1 IRQ_TYPE_NONE>; /* termcount */
	305	rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
a46394be	306	ti,nand-xfer-type = "prefetch-dma";
a4240d3a NM	307	ti,nand-ecc-opt = "bch8";
	308	ti,elm-id = <&elm>;
	309	nand-bus-width = <16>;
	310	gpmc,device-width = <2>;
	311	gpmc,sync-clk-ps = <0>;
	312	gpmc,cs-on-ns = <0>;
	313	gpmc,cs-rd-off-ns = <80>;
	314	gpmc,cs-wr-off-ns = <80>;
	315	gpmc,adv-on-ns = <0>;
	316	gpmc,adv-rd-off-ns = <60>;
	317	gpmc,adv-wr-off-ns = <60>;
	318	gpmc,we-on-ns = <10>;
	319	gpmc,we-off-ns = <50>;
	320	gpmc,oe-on-ns = <4>;
	321	gpmc,oe-off-ns = <40>;
	322	gpmc,access-ns = <40>;
	323	gpmc,wr-access-ns = <80>;
	324	gpmc,rd-cycle-ns = <80>;
	325	gpmc,wr-cycle-ns = <80>;
	326	gpmc,bus-turnaround-ns = <0>;
	327	gpmc,cycle2cycle-delay-ns = <0>;
	328	gpmc,clk-activation-ns = <0>;
	329	gpmc,wr-data-mux-bus-ns = <0>;
	330	/* MTD partition table */
	331	/* All SPL-* partitions are sized to minimal length
	332	* which can be independently programmable. For
	333	* NAND flash this is equal to size of erase-block */
	334	#address-cells = <1>;
	335	#size-cells = <1>;
	336	partition@0 {
	337	label = "NAND.SPL";
	338	reg = <0x00000000 0x000020000>;
	339	};
	340	partition@1 {
	341	label = "NAND.SPL.backup1";
	342	reg = <0x00020000 0x00020000>;
	343	};
	344	partition@2 {
	345	label = "NAND.SPL.backup2";
	346	reg = <0x00040000 0x00020000>;
	347	};
	348	partition@3 {
	349	label = "NAND.SPL.backup3";
	350	reg = <0x00060000 0x00020000>;
	351	};
	352	partition@4 {
	353	label = "NAND.u-boot-spl-os";
	354	reg = <0x00080000 0x00040000>;
	355	};
	356	partition@5 {
	357	label = "NAND.u-boot";
	358	reg = <0x000c0000 0x00100000>;
	359	};
	360	partition@6 {
	361	label = "NAND.u-boot-env";
	362	reg = <0x001c0000 0x00020000>;
	363	};
	364	partition@7 {
	365	label = "NAND.u-boot-env.backup1";
	366	reg = <0x001e0000 0x00020000>;
	367	};
	368	partition@8 {
	369	label = "NAND.kernel";
	370	reg = <0x00200000 0x00800000>;
371	};
372	partition@9 {
373	label = "NAND.file-system";
374	reg = <0x00a00000 0x0f600000>;
375	};
376	};
377	};
378
a4240d3a NM	379	&omap_dwc3_1 {
	380	extcon = <&extcon_usb1>;
	381	};
	382
	383	&omap_dwc3_2 {
	384	extcon = <&extcon_usb2>;
	385	};
	386
	387	&usb1 {
a6f627e2 RQ	388	dr_mode = "otg";
a6f627e2 RQ	389	extcon = <&extcon_usb1>;
a4240d3a NM	390	};
	391
	392	&usb2 {
	393	dr_mode = "host";
b0fa6143	394	extcon = <&extcon_usb2>;
a4240d3a NM	395	};
	396
	397	&mmc1 {
	398	status = "okay";
	399	pinctrl-names = "default";
	400	pinctrl-0 = <&mmc1_pins_default>;
	401	vmmc-supply = <&evm_3v3_sd>;
a4240d3a NM	402	bus-width = <4>;
	403	/*
	404	* SDCD signal is not being used here - using the fact that GPIO mode
	405	* is a viable alternative
	406	*/
	407	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
	408	max-frequency = <192000000>;
	409	};
	410
	411	&mmc2 {
	412	/* SW5-3 in ON position */
	413	status = "okay";
	414	pinctrl-names = "default";
	415	pinctrl-0 = <&mmc2_pins_default>;
a4240d3a	416	bus-width = <8>;
940293af	417	non-removable;
a4240d3a NM	418	max-frequency = <192000000>;
	419	};
	420
70539a52 HN	421	&mmc4 {
	422	status = "okay";
	423	vmmc-supply = <&evm_3v6>;
	424	vqmmc-supply = <&vmmcwl_fixed>;
	425	bus-width = <4>;
	426	cap-power-off-card;
	427	keep-power-in-suspend;
	428	non-removable;
	429	pinctrl-names = "default", "hs", "sdr12", "sdr25";
	430	pinctrl-0 = <&mmc4_pins_default>;
	431	pinctrl-1 = <&mmc4_pins_default>;
	432	pinctrl-2 = <&mmc4_pins_default>;
	433	pinctrl-3 = <&mmc4_pins_default>;
	434	#address-cells = <1>;
	435	#size-cells = <0>;
	436	wifi@2 {
	437	compatible = "ti,wl1835";
	438	reg = <2>;
	439	interrupt-parent = <&gpio5>;
	440	interrupts = <7 IRQ_TYPE_EDGE_RISING>;
	441	};
	442	};
	443
a4240d3a NM	444	&mac {
a4240d3a NM	445	status = "okay";
a4240d3a NM	446	};
	447
	448	&dcan1 {
	449	status = "ok";
	450	pinctrl-names = "default", "sleep", "active";
	451	pinctrl-0 = <&dcan1_pins_sleep>;
	452	pinctrl-1 = <&dcan1_pins_sleep>;
	453	pinctrl-2 = <&dcan1_pins_default>;
	454	};
	455
	456	&qspi {
	457	status = "okay";
a4240d3a	458
a0b83af0	459	spi-max-frequency = <76800000>;
a4240d3a NM	460	m25p80@0 {
a4240d3a NM	461	compatible = "s25fl256s1";
a0b83af0	462	spi-max-frequency = <76800000>;
a4240d3a NM	463	reg = <0>;
	464	spi-tx-bus-width = <1>;
	465	spi-rx-bus-width = <4>;
a4240d3a NM	466	#address-cells = <1>;
	467	#size-cells = <1>;
	468
	469	/* MTD partition table.
	470	* The ROM checks the first four physical blocks
	471	* for a valid file to boot and the flash here is
	472	* 64KiB block size.
	473	*/
	474	partition@0 {
	475	label = "QSPI.SPL";
	476	reg = <0x00000000 0x000010000>;
	477	};
	478	partition@1 {
	479	label = "QSPI.SPL.backup1";
	480	reg = <0x00010000 0x00010000>;
	481	};
	482	partition@2 {
	483	label = "QSPI.SPL.backup2";
	484	reg = <0x00020000 0x00010000>;
	485	};
	486	partition@3 {
	487	label = "QSPI.SPL.backup3";
	488	reg = <0x00030000 0x00010000>;
	489	};
	490	partition@4 {
	491	label = "QSPI.u-boot";
	492	reg = <0x00040000 0x00100000>;
	493	};
	494	partition@5 {
	495	label = "QSPI.u-boot-spl-os";
	496	reg = <0x00140000 0x00080000>;
	497	};
	498	partition@6 {
	499	label = "QSPI.u-boot-env";
	500	reg = <0x001c0000 0x00010000>;
	501	};
	502	partition@7 {
	503	label = "QSPI.u-boot-env.backup1";
	504	reg = <0x001d0000 0x0010000>;
	505	};
	506	partition@8 {
	507	label = "QSPI.kernel";
	508	reg = <0x001e0000 0x0800000>;
	509	};
	510	partition@9 {
	511	label = "QSPI.file-system";
	512	reg = <0x009e0000 0x01620000>;
	513	};
	514	};
	515	};
	516
	517	&dss {
	518	status = "ok";
a4240d3a NM	519	};
	520
	521	&hdmi {
	522	status = "ok";
	523
a4240d3a NM	524	port {
	525	hdmi_out: endpoint {
	526	remote-endpoint = <&tpd12s015_in>;
	527	};
	528	};
	529	};
	530
	531	&atl {
a4240d3a	532	assigned-clocks = <&abe_dpll_sys_clk_mux>,
1839533f	533	<&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
a4240d3a NM	534	<&dpll_abe_ck>,
	535	<&dpll_abe_m2x2_ck>,
	536	<&atl_clkin2_ck>;
	537	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
	538	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
	539
	540	status = "okay";
	541
	542	atl2 {
	543	bws = <DRA7_ATL_WS_MCASP2_FSX>;
	544	aws = <DRA7_ATL_WS_MCASP3_FSX>;
	545	};
	546	};
	547
	548	&mcasp3 {
	549	#sound-dai-cells = <0>;
a4240d3a	550
1839533f	551	assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
a4240d3a NM	552	assigned-clock-parents = <&atl_clkin2_ck>;
	553
	554	status = "okay";
	555
	556	op-mode = <0>; /* MCASP_IIS_MODE */
	557	tdm-slots = <2>;
	558	/* 4 serializer */
	559	serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
	560	1 2 0 0
	561	>;
	562	tx-num-evt = <32>;
	563	rx-num-evt = <32>;
	564	};
	565
	566	&mailbox5 {
	567	status = "okay";
	568	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
	569	status = "okay";
	570	};
	571	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
	572	status = "okay";
	573	};
	574	};
	575
	576	&mailbox6 {
	577	status = "okay";
	578	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
	579	status = "okay";
	580	};
	581	};
d23f3839 KVA	582
	583	&pcie1_rc {
	584	status = "okay";
	585	};