Commit | Line | Data |
---|---|---|
b2441318 | 1 | // SPDX-License-Identifier: GPL-2.0 |
37078732 SH |
2 | /dts-v1/; |
3 | ||
4 | #include "dove.dtsi" | |
5 | ||
6 | / { | |
7 | model = "Globalscale D3Plug"; | |
8 | compatible = "globalscale,d3plug", "marvell,dove"; | |
9 | ||
10 | memory { | |
11 | device_type = "memory"; | |
12 | reg = <0x00000000 0x40000000>; | |
13 | }; | |
14 | ||
15 | chosen { | |
16 | bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; | |
17 | }; | |
18 | ||
19 | leds { | |
20 | compatible = "gpio-leds"; | |
21 | pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; | |
22 | pinctrl-names = "default"; | |
23 | ||
24 | wlan-act { | |
25 | label = "wlan-act"; | |
26 | gpios = <&gpio0 0 1>; | |
27 | }; | |
28 | ||
29 | wlan-ap { | |
30 | label = "wlan-ap"; | |
31 | gpios = <&gpio0 1 1>; | |
32 | }; | |
33 | ||
34 | status { | |
35 | label = "status"; | |
36 | gpios = <&gpio0 2 1>; | |
37 | }; | |
38 | }; | |
39 | ||
40 | regulators { | |
41 | compatible = "simple-bus"; | |
42 | #address-cells = <1>; | |
43 | #size-cells = <0>; | |
44 | ||
45 | usb_power: regulator@1 { | |
46 | compatible = "regulator-fixed"; | |
47 | reg = <1>; | |
48 | regulator-name = "USB Power"; | |
49 | regulator-min-microvolt = <5000000>; | |
50 | regulator-max-microvolt = <5000000>; | |
51 | enable-active-high; | |
52 | regulator-always-on; | |
53 | regulator-boot-on; | |
54 | gpio = <&gpio0 8 0>; | |
55 | pinctrl-0 = <&pmx_gpio_8>; | |
56 | pinctrl-names = "default"; | |
57 | }; | |
58 | }; | |
59 | }; | |
60 | ||
61 | &uart0 { status = "okay"; }; | |
62 | &sata0 { status = "okay"; }; | |
63 | &i2c0 { status = "okay"; }; | |
64 | ||
65 | /* Samsung M8G2F eMMC */ | |
66 | &sdio0 { | |
67 | status = "okay"; | |
68 | non-removable; | |
69 | bus-width = <4>; | |
70 | }; | |
71 | ||
72 | /* Marvell SD8787 WLAN/BT */ | |
73 | &sdio1 { | |
74 | status = "okay"; | |
75 | non-removable; | |
76 | }; | |
77 | ||
78 | &spi0 { | |
79 | status = "okay"; | |
80 | ||
81 | /* spi0.0: 2M Flash Macronix MX25L1605D */ | |
82 | spi-flash@0 { | |
83 | compatible = "st,m25l1605d"; | |
84 | spi-max-frequency = <86000000>; | |
85 | reg = <0>; | |
86 | }; | |
87 | }; | |
88 | ||
89 | &pcie { | |
90 | status = "okay"; | |
91 | /* Fresco Logic USB3.0 xHCI controller */ | |
28fbb9c5 | 92 | pcie@1 { |
37078732 SH |
93 | status = "okay"; |
94 | reset-gpios = <&gpio0 26 1>; | |
95 | reset-delay-us = <20000>; | |
96 | pinctrl-0 = <&pmx_camera_gpio>; | |
97 | pinctrl-names = "default"; | |
98 | }; | |
99 | /* Mini-PCIe slot */ | |
28fbb9c5 | 100 | pcie@2 { |
37078732 SH |
101 | status = "okay"; |
102 | reset-gpios = <&gpio0 25 1>; | |
103 | }; | |
104 | }; |