[linux-block.git] / arch / arm / boot / dts / at91sam9m10g45ek.dts

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
 *
 *  Copyright (C) 2011 Atmel,
 *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
 */
/dts-v1/;
#include "at91sam9g45.dtsi"
#include <dt-bindings/pwm/pwm.h>

/ {
	model = "Atmel AT91SAM9M10G45-EK";
	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";

	chosen {
		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
		stdout-path = "serial0:115200n8";
	};

	memory@70000000 {
		reg = <0x70000000 0x4000000>;
	};

	clocks {
		slow_xtal {
		      clock-frequency = <32768>;
		};

		main_xtal {
		      clock-frequency = <12000000>;
		};
	};

	ahb {
		apb {
			dbgu: serial@ffffee00 {
				status = "okay";
			};

			tcb0: timer@fff7c000 {
				timer@0 {
					compatible = "atmel,tcb-timer";
					reg = <0>, <1>;
				};

				timer@2 {
					compatible = "atmel,tcb-timer";
					reg = <2>;
				};
			};

			usart1: serial@fff90000 {
				pinctrl-0 =
					<&pinctrl_usart1
					 &pinctrl_usart1_rts
					 &pinctrl_usart1_cts>;
				status = "okay";
			};

			macb0: ethernet@fffbc000 {
				phy-mode = "rmii";
				status = "okay";
			};

			i2c0: i2c@fff84000 {
				status = "okay";
				ov2640: camera@30 {
					compatible = "ovti,ov2640";
					reg = <0x30>;
					pinctrl-names = "default";
					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
					clock-names = "xvclk";
					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
					assigned-clock-rates = <25000000>;

					port {
						ov2640_0: endpoint {
							remote-endpoint = <&isi_0>;
							bus-width = <8>;
						};
					};
				};
			};

			i2c1: i2c@fff88000 {
				status = "okay";
			};

			watchdog@fffffd40 {
				status = "okay";
			};

			mmc0: mmc@fff80000 {
				pinctrl-0 = <
					&pinctrl_board_mmc0
					&pinctrl_mmc0_slot0_clk_cmd_dat0
					&pinctrl_mmc0_slot0_dat1_3>;
				pinctrl-names = "default";
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
				};
			};

			mmc1: mmc@fffd0000 {
				pinctrl-0 = <
					&pinctrl_board_mmc1
					&pinctrl_mmc1_slot0_clk_cmd_dat0
					&pinctrl_mmc1_slot0_dat1_3>;
				pinctrl-names = "default";
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
				};
			};

			pinctrl@fffff200 {
				camera_sensor {
					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
						atmel,pins =
							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
					};

					pinctrl_sensor_reset: sensor_reset-0 {
						atmel,pins =
							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};

					pinctrl_sensor_power: sensor_power-0 {
						atmel,pins =
							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};
				};
				mmc0 {
					pinctrl_board_mmc0: mmc0-board {
						atmel,pins =
							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
					};
				};

				mmc1 {
					pinctrl_board_mmc1: mmc1-board {
						atmel,pins =
							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
					};
				};

				pwm0 {
					pinctrl_pwm_leds: pwm-led {
						atmel,pins =
							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
					};
				};
			};

			spi0: spi@fffa4000{
				status = "okay";
				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
				flash@0 {
					compatible = "atmel,at45", "atmel,dataflash";
					spi-max-frequency = <13000000>;
					reg = <0>;
				};
			};

			usb2: gadget@fff78000 {
				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
				status = "okay";
			};

			ac97: sound@fffac000 {
				status = "okay";
			};

			adc0: adc@fffb0000 {
				pinctrl-names = "default";
				pinctrl-0 = <
					&pinctrl_adc0_ad0
					&pinctrl_adc0_ad1
					&pinctrl_adc0_ad2
					&pinctrl_adc0_ad3
					&pinctrl_adc0_ad4
					&pinctrl_adc0_ad5
					&pinctrl_adc0_ad6
					&pinctrl_adc0_ad7>;
				atmel,adc-ts-wires = <4>;
				status = "okay";
			};

			isi@fffb4000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_isi_data_0_7>;
				status = "okay";
				port {
					isi_0: endpoint {
						remote-endpoint = <&ov2640_0>;
						bus-width = <8>;
						vsync-active = <1>;
						hsync-active = <1>;
					};
				};
			};

			pwm0: pwm@fffb8000 {
				status = "okay";

				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_pwm_leds>;
			};

			rtc@fffffd20 {
				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
				status = "okay";
			};

			gpbr: syscon@fffffd60 {
				status = "okay";
			};

			rtc@fffffdb0 {
				status = "okay";
			};
		};

		fb0: fb@500000 {
			display = <&display0>;
			status = "okay";

			display0: panel {
				bits-per-pixel = <32>;
				atmel,lcdcon-backlight;
				atmel,dmacon = <0x1>;
				atmel,lcdcon2 = <0x80008002>;
				atmel,guard-time = <9>;
				atmel,lcd-wiring-mode = "RGB";

				display-timings {
					native-mode = <&timing0>;
					timing0: timing0 {
						clock-frequency = <9000000>;
						hactive = <480>;
						vactive = <272>;
						hback-porch = <1>;
						hfront-porch = <1>;
						vback-porch = <40>;
						vfront-porch = <1>;
						hsync-len = <45>;
						vsync-len = <1>;
					};
				};
			};
		};

		ebi: ebi@10000000 {
			status = "okay";

			nand_controller: nand-controller {
				status = "okay";
				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
				pinctrl-names = "default";

				nand@3 {
					reg = <0x3 0x0 0x800000>;
					rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
					nand-bus-width = <8>;
					nand-ecc-mode = "soft";
					nand-on-flash-bbt;
					label = "atmel_nand";

					partitions {
						compatible = "fixed-partitions";
						#address-cells = <1>;
						#size-cells = <1>;

						boot@0 {
							label = "bootstrap/uboot/kernel";
							reg = <0x0 0x400000>;
						};

						rootfs@400000 {
							label = "rootfs";
							reg = <0x400000 0x3C00000>;
						};

						data@4000000 {
							label = "data";
							reg = <0x4000000 0xC000000>;
						};
					};
				};
			};
		};

		usb0: ohci@700000 {
			status = "okay";
			num-ports = <2>;
			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
					   &pioD 3 GPIO_ACTIVE_LOW>;
		};

		usb1: ehci@800000 {
			status = "okay";
		};
	};

	led-controller-1 {
		compatible = "gpio-leds";

		led-1 {
			label = "d8";
			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};
	};

	led-controller-2 {
		compatible = "pwm-leds";

		led-2 {
			label = "d6";
			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
			max-brightness = <255>;
			linux,default-trigger = "nand-disk";
		};

		led-3 {
			label = "d7";
			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
			max-brightness = <255>;
			linux,default-trigger = "mmc0";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";

		left_click {
			label = "left_click";
			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
			linux,code = <272>;
			wakeup-source;
		};

		right_click {
			label = "right_click";
			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
			linux,code = <273>;
			wakeup-source;
		};

		left {
			label = "Joystick Left";
			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
			linux,code = <105>;
		};

		right {
			label = "Joystick Right";
			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
			linux,code = <106>;
		};

		up {
			label = "Joystick Up";
			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
			linux,code = <103>;
		};

		down {
			label = "Joystick Down";
			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
			linux,code = <108>;
		};

		enter {
			label = "Joystick Press";
			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
			linux,code = <28>;
		};
	};
};
Commit	Line	Data
a636cd6c	1	// SPDX-License-Identifier: GPL-2.0-or-later
49fe2ba3 NF	2	/*
	3	* at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
	4	*
	5	* Copyright (C) 2011 Atmel,
	6	* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
49fe2ba3 NF	7	*/
49fe2ba3 NF	8	/dts-v1/;
6db64d29	9	#include "at91sam9g45.dtsi"
66844c74	10	#include <dt-bindings/pwm/pwm.h>
49fe2ba3 NF	11
	12	/ {
	13	model = "Atmel AT91SAM9M10G45-EK";
	14	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
	15
	16	chosen {
aa070464 AB	17	bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
aa070464 AB	18	stdout-path = "serial0:115200n8";
49fe2ba3 NF	19	};
49fe2ba3 NF	20
996710a8	21	memory@70000000 {
49fe2ba3 NF	22	reg = <0x70000000 0x4000000>;
	23	};
	24
eb5e76ff	25	clocks {
4c67a131 AB	26	slow_xtal {
	27	clock-frequency = <32768>;
	28	};
	29
	30	main_xtal {
	31	clock-frequency = <12000000>;
	32	};
eb5e76ff JCPV	33	};
eb5e76ff JCPV	34
49fe2ba3 NF	35	ahb {
	36	apb {
	37	dbgu: serial@ffffee00 {
	38	status = "okay";
	39	};
	40
fb0f84fa AB	41	tcb0: timer@fff7c000 {
	42	timer@0 {
	43	compatible = "atmel,tcb-timer";
	44	reg = <0>, <1>;
	45	};
	46
	47	timer@2 {
	48	compatible = "atmel,tcb-timer";
	49	reg = <2>;
	50	};
	51	};
	52
49fe2ba3	53	usart1: serial@fff90000 {
c58c0c5a JCPV	54	pinctrl-0 =
	55	<&pinctrl_usart1
	56	&pinctrl_usart1_rts
	57	&pinctrl_usart1_cts>;
49fe2ba3 NF	58	status = "okay";
49fe2ba3 NF	59	};
0d4f99d8 NF	60
	61	macb0: ethernet@fffbc000 {
	62	phy-mode = "rmii";
	63	status = "okay";
	64	};
fbc18715 LD	65
	66	i2c0: i2c@fff84000 {
	67	status = "okay";
917cdc5f JW	68	ov2640: camera@30 {
	69	compatible = "ovti,ov2640";
	70	reg = <0x30>;
	71	pinctrl-names = "default";
	72	pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
	73	resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
	74	pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
15090390	75	clocks = <&pmc PMC_TYPE_SYSTEM 9>;
917cdc5f	76	clock-names = "xvclk";
15090390	77	assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
917cdc5f JW	78	assigned-clock-rates = <25000000>;
	79
	80	port {
	81	ov2640_0: endpoint {
	82	remote-endpoint = <&isi_0>;
	83	bus-width = <8>;
	84	};
	85	};
	86	};
fbc18715 LD	87	};
	88
	89	i2c1: i2c@fff88000 {
	90	status = "okay";
	91	};
4134a455	92
c77bcef4 WY	93	watchdog@fffffd40 {
	94	status = "okay";
	95	};
	96
4134a455	97	mmc0: mmc@fff80000 {
199e2ede JCPV	98	pinctrl-0 = <
	99	&pinctrl_board_mmc0
	100	&pinctrl_mmc0_slot0_clk_cmd_dat0
	101	&pinctrl_mmc0_slot0_dat1_3>;
b0d0c3bb	102	pinctrl-names = "default";
4134a455 LD	103	status = "okay";
	104	slot@0 {
	105	reg = <0>;
	106	bus-width = <4>;
92f8629b	107	cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
4134a455 LD	108	};
	109	};
	110
	111	mmc1: mmc@fffd0000 {
199e2ede JCPV	112	pinctrl-0 = <
	113	&pinctrl_board_mmc1
	114	&pinctrl_mmc1_slot0_clk_cmd_dat0
	115	&pinctrl_mmc1_slot0_dat1_3>;
b0d0c3bb	116	pinctrl-names = "default";
4134a455 LD	117	status = "okay";
	118	slot@0 {
	119	reg = <0>;
	120	bus-width = <4>;
92f8629b JCPV	121	cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
92f8629b JCPV	122	wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
4134a455 LD	123	};
4134a455 LD	124	};
199e2ede JCPV	125
199e2ede JCPV	126	pinctrl@fffff200 {
917cdc5f JW	127	camera_sensor {
	128	pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
	129	atmel,pins =
	130	<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
	131	};
	132
	133	pinctrl_sensor_reset: sensor_reset-0 {
	134	atmel,pins =
	135	<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
	136	};
	137
	138	pinctrl_sensor_power: sensor_power-0 {
	139	atmel,pins =
	140	<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
	141	};
	142	};
199e2ede JCPV	143	mmc0 {
	144	pinctrl_board_mmc0: mmc0-board {
	145	atmel,pins =
c9d0f317	146	<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */
199e2ede JCPV	147	};
	148	};
	149
	150	mmc1 {
	151	pinctrl_board_mmc1: mmc1-board {
	152	atmel,pins =
c9d0f317 JCPV	153	<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */
c9d0f317 JCPV	154	AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */
199e2ede JCPV	155	};
199e2ede JCPV	156	};
eed97298 BS	157
	158	pwm0 {
	159	pinctrl_pwm_leds: pwm-led {
	160	atmel,pins =
	161	<AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */
	162	AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */
	163	};
	164	};
199e2ede	165	};
b6811e9a RG	166
	167	spi0: spi@fffa4000{
	168	status = "okay";
	169	cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
4a6471e6	170	flash@0 {
b6811e9a RG	171	compatible = "atmel,at45", "atmel,dataflash";
	172	spi-max-frequency = <13000000>;
	173	reg = <0>;
	174	};
	175	};
24ce10e1 JCPV	176
	177	usb2: gadget@fff78000 {
	178	atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
	179	status = "okay";
	180	};
eed97298	181
2b17939d DR	182	ac97: sound@fffac000 {
	183	status = "okay";
	184	};
	185
e10a57e3 AB	186	adc0: adc@fffb0000 {
	187	pinctrl-names = "default";
	188	pinctrl-0 = <
	189	&pinctrl_adc0_ad0
	190	&pinctrl_adc0_ad1
	191	&pinctrl_adc0_ad2
	192	&pinctrl_adc0_ad3
	193	&pinctrl_adc0_ad4
	194	&pinctrl_adc0_ad5
	195	&pinctrl_adc0_ad6
	196	&pinctrl_adc0_ad7>;
	197	atmel,adc-ts-wires = <4>;
	198	status = "okay";
	199	};
	200
917cdc5f JW	201	isi@fffb4000 {
	202	pinctrl-names = "default";
	203	pinctrl-0 = <&pinctrl_isi_data_0_7>;
	204	status = "okay";
	205	port {
	206	isi_0: endpoint {
	207	remote-endpoint = <&ov2640_0>;
	208	bus-width = <8>;
bc81beb8 JW	209	vsync-active = <1>;
bc81beb8 JW	210	hsync-active = <1>;
917cdc5f JW	211	};
	212	};
	213	};
	214
eed97298 BS	215	pwm0: pwm@fffb8000 {
	216	status = "okay";
	217
	218	pinctrl-names = "default";
	219	pinctrl-0 = <&pinctrl_pwm_leds>;
	220	};
4dd7933a	221
199ec7ab BB	222	rtc@fffffd20 {
	223	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
	224	status = "okay";
	225	};
	226
	227	gpbr: syscon@fffffd60 {
	228	status = "okay";
	229	};
	230
4dd7933a EL	231	rtc@fffffdb0 {
	232	status = "okay";
	233	};
49fe2ba3	234	};
d6a01661	235
ed4ced0c	236	fb0: fb@500000 {
f4390a79 JCPV	237	display = <&display0>;
	238	status = "okay";
	239
8a6836ee	240	display0: panel {
f4390a79 JCPV	241	bits-per-pixel = <32>;
	242	atmel,lcdcon-backlight;
	243	atmel,dmacon = <0x1>;
	244	atmel,lcdcon2 = <0x80008002>;
	245	atmel,guard-time = <9>;
	246	atmel,lcd-wiring-mode = "RGB";
	247
	248	display-timings {
	249	native-mode = <&timing0>;
	250	timing0: timing0 {
	251	clock-frequency = <9000000>;
	252	hactive = <480>;
	253	vactive = <272>;
	254	hback-porch = <1>;
	255	hfront-porch = <1>;
	256	vback-porch = <40>;
	257	vfront-porch = <1>;
	258	hsync-len = <45>;
	259	vsync-len = <1>;
	260	};
	261	};
	262	};
	263	};
	264
1004a297	265	ebi: ebi@10000000 {
d6a01661 JCPV	266	status = "okay";
d6a01661 JCPV	267
1004a297 BB	268	nand_controller: nand-controller {
	269	status = "okay";
	270	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
	271	pinctrl-names = "default";
d6a01661	272
1004a297 BB	273	nand@3 {
	274	reg = <0x3 0x0 0x800000>;
	275	rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
	276	cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
	277	nand-bus-width = <8>;
	278	nand-ecc-mode = "soft";
	279	nand-on-flash-bbt;
	280	label = "atmel_nand";
	281
	282	partitions {
	283	compatible = "fixed-partitions";
	284	#address-cells = <1>;
	285	#size-cells = <1>;
	286
	287	boot@0 {
	288	label = "bootstrap/uboot/kernel";
	289	reg = <0x0 0x400000>;
	290	};
d6a01661	291
1004a297 BB	292	rootfs@400000 {
	293	label = "rootfs";
	294	reg = <0x400000 0x3C00000>;
	295	};
	296
	297	data@4000000 {
	298	label = "data";
	299	reg = <0x4000000 0xC000000>;
	300	};
	301	};
	302	};
d6a01661	303	};
6a062459	304	};
d6a01661	305
8dccafaa	306	usb0: ohci@700000 {
6a062459 JCPV	307	status = "okay";
6a062459 JCPV	308	num-ports = <2>;
92f8629b JCPV	309	atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
92f8629b JCPV	310	&pioD 3 GPIO_ACTIVE_LOW>;
d6a01661	311	};
62c5553a	312
8dccafaa	313	usb1: ehci@800000 {
62c5553a JCPV	314	status = "okay";
62c5553a JCPV	315	};
49fe2ba3	316	};
f2ee7acd	317
997ebd64	318	led-controller-1 {
f2ee7acd JCPV	319	compatible = "gpio-leds";
f2ee7acd JCPV	320
997ebd64	321	led-1 {
f2ee7acd	322	label = "d8";
92f8629b	323	gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
f2ee7acd JCPV	324	linux,default-trigger = "heartbeat";
f2ee7acd JCPV	325	};
eed97298 BS	326	};
eed97298 BS	327
997ebd64	328	led-controller-2 {
eed97298	329	compatible = "pwm-leds";
f2ee7acd	330
997ebd64	331	led-2 {
f2ee7acd	332	label = "d6";
66844c74	333	pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
eed97298	334	max-brightness = <255>;
f2ee7acd JCPV	335	linux,default-trigger = "nand-disk";
	336	};
	337
997ebd64	338	led-3 {
f2ee7acd	339	label = "d7";
66844c74	340	pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
eed97298	341	max-brightness = <255>;
f2ee7acd JCPV	342	linux,default-trigger = "mmc0";
	343	};
	344	};
8a087b0c JCPV	345
	346	gpio_keys {
	347	compatible = "gpio-keys";
8a087b0c JCPV	348
	349	left_click {
	350	label = "left_click";
92f8629b	351	gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
8a087b0c	352	linux,code = <272>;
67ae8b9b	353	wakeup-source;
8a087b0c JCPV	354	};
	355
	356	right_click {
	357	label = "right_click";
92f8629b	358	gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
8a087b0c	359	linux,code = <273>;
67ae8b9b	360	wakeup-source;
8a087b0c JCPV	361	};
	362
	363	left {
	364	label = "Joystick Left";
92f8629b	365	gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
8a087b0c JCPV	366	linux,code = <105>;
	367	};
	368
	369	right {
	370	label = "Joystick Right";
92f8629b	371	gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
8a087b0c JCPV	372	linux,code = <106>;
	373	};
	374
	375	up {
	376	label = "Joystick Up";
92f8629b	377	gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
8a087b0c JCPV	378	linux,code = <103>;
	379	};
	380
	381	down {
	382	label = "Joystick Down";
92f8629b	383	gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
8a087b0c JCPV	384	linux,code = <108>;
	385	};
	386
	387	enter {
	388	label = "Joystick Press";
92f8629b	389	gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
8a087b0c JCPV	390	linux,code = <28>;
	391	};
	392	};
49fe2ba3	393	};