Commit | Line | Data |
---|---|---|
22b5a0f7 NF |
1 | /* |
2 | * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board | |
3 | * | |
4 | * Copyright (C) 2015 Atmel, | |
5 | * 2015 Nicolas Ferre <nicolas.ferre@atmel.com> | |
6 | * | |
7 | * This file is dual-licensed: you can use it either under the terms | |
8 | * of the GPL or the X11 license, at your option. Note that this dual | |
9 | * licensing only applies to this file, and not this project as a | |
10 | * whole. | |
11 | * | |
12 | * a) This file is free software; you can redistribute it and/or | |
13 | * modify it under the terms of the GNU General Public License as | |
14 | * published by the Free Software Foundation; either version 2 of the | |
15 | * License, or (at your option) any later version. | |
16 | * | |
17 | * This file is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * Or, alternatively, | |
23 | * | |
24 | * b) Permission is hereby granted, free of charge, to any person | |
25 | * obtaining a copy of this software and associated documentation | |
26 | * files (the "Software"), to deal in the Software without | |
27 | * restriction, including without limitation the rights to use, | |
28 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
29 | * sell copies of the Software, and to permit persons to whom the | |
30 | * Software is furnished to do so, subject to the following | |
31 | * conditions: | |
32 | * | |
33 | * The above copyright notice and this permission notice shall be | |
34 | * included in all copies or substantial portions of the Software. | |
35 | * | |
36 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
37 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
38 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
39 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
40 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
41 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
42 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
43 | * OTHER DEALINGS IN THE SOFTWARE. | |
44 | */ | |
45 | /dts-v1/; | |
46 | #include "sama5d2.dtsi" | |
a9b672a6 | 47 | #include "sama5d2-pinfunc.h" |
13e2a6fd | 48 | #include <dt-bindings/mfd/atmel-flexcom.h> |
ff964962 | 49 | #include <dt-bindings/gpio/gpio.h> |
22b5a0f7 NF |
50 | |
51 | / { | |
52 | model = "Atmel SAMA5D2 Xplained"; | |
53 | compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; | |
54 | ||
55 | chosen { | |
56 | stdout-path = "serial0:115200n8"; | |
57 | }; | |
58 | ||
22b5a0f7 | 59 | clocks { |
22b5a0f7 NF |
60 | slow_xtal { |
61 | clock-frequency = <32768>; | |
62 | }; | |
63 | ||
64 | main_xtal { | |
65 | clock-frequency = <12000000>; | |
66 | }; | |
67 | }; | |
68 | ||
69 | ahb { | |
70 | usb0: gadget@00300000 { | |
8f3a8a67 | 71 | atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; |
ff964962 CP |
72 | pinctrl-names = "default"; |
73 | pinctrl-0 = <&pinctrl_usba_vbus>; | |
22b5a0f7 NF |
74 | status = "okay"; |
75 | }; | |
76 | ||
77 | usb1: ohci@00400000 { | |
78 | num-ports = <3>; | |
8f3a8a67 LD |
79 | atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ |
80 | &pioA PIN_PB10 GPIO_ACTIVE_HIGH | |
ff964962 CP |
81 | 0 |
82 | >; | |
83 | pinctrl-names = "default"; | |
84 | pinctrl-0 = <&pinctrl_usb_default>; | |
22b5a0f7 NF |
85 | status = "okay"; |
86 | }; | |
87 | ||
88 | usb2: ehci@00500000 { | |
89 | status = "okay"; | |
90 | }; | |
91 | ||
13e2a6fd LD |
92 | sdmmc0: sdio-host@a0000000 { |
93 | bus-width = <8>; | |
94 | pinctrl-names = "default"; | |
95 | pinctrl-0 = <&pinctrl_sdmmc0_default>; | |
96 | non-removable; | |
97 | mmc-ddr-1_8v; | |
98 | status = "okay"; | |
99 | }; | |
100 | ||
101 | sdmmc1: sdio-host@b0000000 { | |
102 | bus-width = <4>; | |
103 | pinctrl-names = "default"; | |
104 | pinctrl-0 = <&pinctrl_sdmmc1_default>; | |
105 | status = "okay"; /* conflict with qspi0 */ | |
106 | }; | |
107 | ||
22b5a0f7 NF |
108 | apb { |
109 | spi0: spi@f8000000 { | |
a9b672a6 LD |
110 | pinctrl-names = "default"; |
111 | pinctrl-0 = <&pinctrl_spi0_default>; | |
22b5a0f7 NF |
112 | status = "okay"; |
113 | ||
114 | m25p80@0 { | |
115 | compatible = "atmel,at25df321a"; | |
116 | reg = <0>; | |
117 | spi-max-frequency = <50000000>; | |
118 | }; | |
119 | }; | |
120 | ||
121 | macb0: ethernet@f8008000 { | |
a9b672a6 | 122 | pinctrl-names = "default"; |
6c482fd1 | 123 | pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; |
22b5a0f7 NF |
124 | phy-mode = "rmii"; |
125 | status = "okay"; | |
6c482fd1 NF |
126 | |
127 | ethernet-phy@1 { | |
128 | reg = <0x1>; | |
129 | interrupt-parent = <&pioA>; | |
8f3a8a67 | 130 | interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>; |
6c482fd1 | 131 | }; |
22b5a0f7 NF |
132 | }; |
133 | ||
ca6349a8 SW |
134 | pdmic@f8018000 { |
135 | pinctrl-names = "default"; | |
136 | pinctrl-0 = <&pinctrl_pdmic_default>; | |
137 | atmel,model = "PDMIC @ sama5d2_xplained"; | |
138 | atmel,mic-min-freq = <1000000>; | |
139 | atmel,mic-max-freq = <3246000>; | |
140 | atmel,mic-offset = <0x0>; | |
141 | status = "okay"; | |
142 | }; | |
143 | ||
22b5a0f7 | 144 | uart1: serial@f8020000 { |
a9b672a6 LD |
145 | pinctrl-names = "default"; |
146 | pinctrl-0 = <&pinctrl_uart1_default>; | |
78162d48 AB |
147 | atmel,use-dma-rx; |
148 | atmel,use-dma-tx; | |
22b5a0f7 NF |
149 | status = "okay"; |
150 | }; | |
151 | ||
152 | i2c0: i2c@f8028000 { | |
153 | dmas = <0>, <0>; | |
a9b672a6 LD |
154 | pinctrl-names = "default"; |
155 | pinctrl-0 = <&pinctrl_i2c0_default>; | |
0a804b57 | 156 | i2c-sda-hold-time-ns = <350>; |
22b5a0f7 | 157 | status = "okay"; |
143877e6 | 158 | |
b8bca7ea WY |
159 | pmic@5b { |
160 | compatible = "active-semi,act8945a"; | |
143877e6 WY |
161 | reg = <0x5b>; |
162 | active-semi,vsel-high; | |
8f3a8a67 LD |
163 | active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; |
164 | active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; | |
165 | active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>; | |
b8bca7ea WY |
166 | active-semi,input-voltage-threshold-microvolt = <6600>; |
167 | active-semi,precondition-timeout = <40>; | |
168 | active-semi,total-timeout = <3>; | |
169 | pinctrl-names = "default"; | |
170 | pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; | |
143877e6 WY |
171 | status = "okay"; |
172 | ||
173 | regulators { | |
b8bca7ea | 174 | vdd_1v35_reg: REG_DCDC1 { |
143877e6 WY |
175 | regulator-name = "VDD_1V35"; |
176 | regulator-min-microvolt = <1350000>; | |
177 | regulator-max-microvolt = <1350000>; | |
178 | regulator-always-on; | |
179 | }; | |
180 | ||
b8bca7ea | 181 | vdd_1v2_reg: REG_DCDC2 { |
143877e6 WY |
182 | regulator-name = "VDD_1V2"; |
183 | regulator-min-microvolt = <1100000>; | |
184 | regulator-max-microvolt = <1300000>; | |
185 | regulator-always-on; | |
186 | }; | |
187 | ||
b8bca7ea | 188 | vdd_3v3_reg: REG_DCDC3 { |
143877e6 WY |
189 | regulator-name = "VDD_3V3"; |
190 | regulator-min-microvolt = <3300000>; | |
191 | regulator-max-microvolt = <3300000>; | |
192 | regulator-always-on; | |
193 | }; | |
194 | ||
b8bca7ea | 195 | vdd_fuse_reg: REG_LDO1 { |
143877e6 WY |
196 | regulator-name = "VDD_FUSE"; |
197 | regulator-min-microvolt = <2500000>; | |
198 | regulator-max-microvolt = <2500000>; | |
199 | regulator-always-on; | |
200 | }; | |
201 | ||
b8bca7ea | 202 | vdd_3v3_lp_reg: REG_LDO2 { |
143877e6 WY |
203 | regulator-name = "VDD_3V3_LP"; |
204 | regulator-min-microvolt = <3300000>; | |
205 | regulator-max-microvolt = <3300000>; | |
206 | regulator-always-on; | |
207 | }; | |
208 | ||
b8bca7ea | 209 | vdd_led_reg: REG_LDO3 { |
143877e6 WY |
210 | regulator-name = "VDD_LED"; |
211 | regulator-min-microvolt = <3300000>; | |
212 | regulator-max-microvolt = <3300000>; | |
213 | regulator-always-on; | |
214 | }; | |
215 | ||
b8bca7ea | 216 | vdd_sdhc_1v8_reg: REG_LDO4 { |
143877e6 WY |
217 | regulator-name = "VDD_SDHC_1V8"; |
218 | regulator-min-microvolt = <1800000>; | |
219 | regulator-max-microvolt = <1800000>; | |
863c1ca7 | 220 | regulator-always-on; |
143877e6 WY |
221 | }; |
222 | }; | |
223 | }; | |
22b5a0f7 NF |
224 | }; |
225 | ||
eb0b59d4 CB |
226 | pwm0: pwm@f802c000 { |
227 | status = "okay"; | |
228 | }; | |
229 | ||
13e2a6fd LD |
230 | flx0: flexcom@f8034000 { |
231 | atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; | |
232 | status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ | |
233 | ||
234 | uart5: serial@200 { | |
235 | compatible = "atmel,at91sam9260-usart"; | |
236 | reg = <0x200 0x200>; | |
237 | interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; | |
238 | clocks = <&flx0_clk>; | |
239 | clock-names = "usart"; | |
240 | pinctrl-names = "default"; | |
241 | pinctrl-0 = <&pinctrl_flx0_default>; | |
242 | atmel,fifo-size = <32>; | |
243 | status = "okay"; | |
244 | }; | |
245 | }; | |
246 | ||
e4b9a21b NF |
247 | shdwc@f8048010 { |
248 | atmel,shdwc-debouncer = <976>; | |
367daf89 | 249 | atmel,wakeup-rtc-timer; |
e4b9a21b NF |
250 | |
251 | input@0 { | |
252 | reg = <0>; | |
253 | atmel,wakeup-type = "low"; | |
254 | }; | |
255 | }; | |
256 | ||
92bd7aa4 WY |
257 | watchdog@f8048040 { |
258 | status = "okay"; | |
259 | }; | |
260 | ||
bc6d5d76 WY |
261 | can0: can@f8054000 { |
262 | pinctrl-names = "default"; | |
263 | pinctrl-0 = <&pinctrl_can0_default>; | |
264 | status = "okay"; | |
265 | }; | |
266 | ||
22b5a0f7 | 267 | uart3: serial@fc008000 { |
89a236d6 NF |
268 | atmel,use-dma-rx; |
269 | atmel,use-dma-tx; | |
a9b672a6 LD |
270 | pinctrl-names = "default"; |
271 | pinctrl-0 = <&pinctrl_uart3_default>; | |
22b5a0f7 NF |
272 | status = "okay"; |
273 | }; | |
274 | ||
13e2a6fd LD |
275 | flx4: flexcom@fc018000 { |
276 | atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; | |
277 | status = "okay"; | |
278 | ||
279 | i2c2: i2c@600 { | |
280 | compatible = "atmel,sama5d2-i2c"; | |
281 | reg = <0x600 0x200>; | |
282 | interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; | |
283 | dmas = <0>, <0>; | |
284 | dma-names = "tx", "rx"; | |
285 | #address-cells = <1>; | |
286 | #size-cells = <0>; | |
287 | clocks = <&flx4_clk>; | |
288 | pinctrl-names = "default"; | |
289 | pinctrl-0 = <&pinctrl_flx4_default>; | |
290 | atmel,fifo-size = <16>; | |
291 | status = "okay"; | |
292 | }; | |
293 | }; | |
294 | ||
22b5a0f7 NF |
295 | i2c1: i2c@fc028000 { |
296 | dmas = <0>, <0>; | |
a9b672a6 LD |
297 | pinctrl-names = "default"; |
298 | pinctrl-0 = <&pinctrl_i2c1_default>; | |
22b5a0f7 NF |
299 | status = "okay"; |
300 | ||
301 | at24@54 { | |
302 | compatible = "atmel,24c02"; | |
303 | reg = <0x54>; | |
304 | pagesize = <16>; | |
305 | }; | |
306 | }; | |
a9b672a6 | 307 | |
5e72c25b LD |
308 | adc: adc@fc030000 { |
309 | vddana-supply = <&vdd_3v3_lp_reg>; | |
310 | vref-supply = <&vdd_3v3_lp_reg>; | |
311 | pinctrl-names = "default"; | |
84c70b23 | 312 | pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; |
5e72c25b LD |
313 | status = "okay"; |
314 | }; | |
315 | ||
a9b672a6 | 316 | pinctrl@fc038000 { |
5e72c25b LD |
317 | /* |
318 | * There is no real pinmux for ADC, if the pin | |
319 | * is not requested by another peripheral then | |
320 | * the muxing is done when channel is enabled. | |
321 | * Requesting pins for ADC is GPIO is | |
322 | * encouraged to prevent conflicts and to | |
323 | * disable bias in order to be in the same | |
324 | * state when the pin is not muxed to the adc. | |
325 | */ | |
326 | pinctrl_adc_default: adc_default { | |
327 | pinmux = <PIN_PD23__GPIO>; | |
328 | bias-disable; | |
329 | }; | |
330 | ||
bc6d5d76 WY |
331 | pinctrl_can0_default: can0_default { |
332 | pinmux = <PIN_PC10__CANTX0>, | |
333 | <PIN_PC11__CANRX0>; | |
334 | bias-disable; | |
335 | }; | |
336 | ||
337 | pinctrl_can1_default: can1_default { | |
338 | pinmux = <PIN_PC26__CANTX1>, | |
339 | <PIN_PC27__CANRX1>; | |
340 | bias-disable; | |
341 | }; | |
342 | ||
84c70b23 EH |
343 | /* |
344 | * The ADTRG pin can work on any edge type. | |
345 | * In here it's being pulled up, so need to | |
346 | * connect it to ground to get an edge e.g. | |
347 | * Trigger can be configured on falling, rise | |
348 | * or any edge, and the pull-up can be changed | |
349 | * to pull-down or left floating according to | |
350 | * needs. | |
351 | */ | |
352 | pinctrl_adtrg_default: adtrg_default { | |
353 | pinmux = <PIN_PD31__ADTRG>; | |
354 | bias-pull-up; | |
355 | }; | |
356 | ||
b8bca7ea WY |
357 | pinctrl_charger_chglev: charger_chglev { |
358 | pinmux = <PIN_PA12__GPIO>; | |
359 | bias-disable; | |
360 | }; | |
361 | ||
362 | pinctrl_charger_irq: charger_irq { | |
363 | pinmux = <PIN_PB13__GPIO>; | |
364 | bias-disable; | |
365 | }; | |
366 | ||
367 | pinctrl_charger_lbo: charger_lbo { | |
368 | pinmux = <PIN_PC8__GPIO>; | |
369 | bias-pull-up; | |
370 | }; | |
371 | ||
b133ca7a CP |
372 | pinctrl_classd_default: classd_default { |
373 | pinmux = <PIN_PB1__CLASSD_R0>, | |
374 | <PIN_PB2__CLASSD_R1>, | |
375 | <PIN_PB3__CLASSD_R2>, | |
376 | <PIN_PB4__CLASSD_R3>; | |
377 | bias-pull-up; | |
378 | }; | |
379 | ||
13e2a6fd LD |
380 | pinctrl_flx0_default: flx0_default { |
381 | pinmux = <PIN_PB28__FLEXCOM0_IO0>, | |
382 | <PIN_PB29__FLEXCOM0_IO1>; | |
383 | bias-disable; | |
384 | }; | |
385 | ||
386 | pinctrl_flx4_default: flx4_default { | |
387 | pinmux = <PIN_PD12__FLEXCOM4_IO0>, | |
388 | <PIN_PD13__FLEXCOM4_IO1>; | |
389 | bias-disable; | |
390 | }; | |
391 | ||
a9b672a6 LD |
392 | pinctrl_i2c0_default: i2c0_default { |
393 | pinmux = <PIN_PD21__TWD0>, | |
394 | <PIN_PD22__TWCK0>; | |
395 | bias-disable; | |
396 | }; | |
397 | ||
398 | pinctrl_i2c1_default: i2c1_default { | |
399 | pinmux = <PIN_PD4__TWD1>, | |
400 | <PIN_PD5__TWCK1>; | |
401 | bias-disable; | |
402 | }; | |
403 | ||
c7e48d44 LD |
404 | pinctrl_key_gpio_default: key_gpio_default { |
405 | pinmux = <PIN_PB9__GPIO>; | |
406 | bias-pull-up; | |
407 | }; | |
408 | ||
ed0f4b3f WY |
409 | pinctrl_led_gpio_default: led_gpio_default { |
410 | pinmux = <PIN_PB0__GPIO>, | |
411 | <PIN_PB5__GPIO>, | |
412 | <PIN_PB6__GPIO>; | |
413 | bias-pull-up; | |
414 | }; | |
415 | ||
a9b672a6 LD |
416 | pinctrl_macb0_default: macb0_default { |
417 | pinmux = <PIN_PB14__GTXCK>, | |
418 | <PIN_PB15__GTXEN>, | |
419 | <PIN_PB16__GRXDV>, | |
420 | <PIN_PB17__GRXER>, | |
421 | <PIN_PB18__GRX0>, | |
422 | <PIN_PB19__GRX1>, | |
423 | <PIN_PB20__GTX0>, | |
424 | <PIN_PB21__GTX1>, | |
425 | <PIN_PB22__GMDC>, | |
426 | <PIN_PB23__GMDIO>; | |
427 | bias-disable; | |
428 | }; | |
429 | ||
6c482fd1 NF |
430 | pinctrl_macb0_phy_irq: macb0_phy_irq { |
431 | pinmux = <PIN_PC9__GPIO>; | |
34ff2dc7 | 432 | bias-disable; |
6c482fd1 NF |
433 | }; |
434 | ||
ca6349a8 SW |
435 | pinctrl_pdmic_default: pdmic_default { |
436 | pinmux = <PIN_PB26__PDMIC_DAT>, | |
437 | <PIN_PB27__PDMIC_CLK>; | |
438 | bias-disable; | |
439 | }; | |
440 | ||
13e2a6fd LD |
441 | pinctrl_sdmmc0_default: sdmmc0_default { |
442 | cmd_data { | |
443 | pinmux = <PIN_PA1__SDMMC0_CMD>, | |
444 | <PIN_PA2__SDMMC0_DAT0>, | |
445 | <PIN_PA3__SDMMC0_DAT1>, | |
446 | <PIN_PA4__SDMMC0_DAT2>, | |
447 | <PIN_PA5__SDMMC0_DAT3>, | |
448 | <PIN_PA6__SDMMC0_DAT4>, | |
449 | <PIN_PA7__SDMMC0_DAT5>, | |
450 | <PIN_PA8__SDMMC0_DAT6>, | |
451 | <PIN_PA9__SDMMC0_DAT7>; | |
452 | bias-pull-up; | |
453 | }; | |
454 | ||
455 | ck_cd_rstn_vddsel { | |
456 | pinmux = <PIN_PA0__SDMMC0_CK>, | |
457 | <PIN_PA10__SDMMC0_RSTN>, | |
458 | <PIN_PA11__SDMMC0_VDDSEL>, | |
459 | <PIN_PA13__SDMMC0_CD>; | |
460 | bias-disable; | |
461 | }; | |
462 | }; | |
463 | ||
464 | pinctrl_sdmmc1_default: sdmmc1_default { | |
465 | cmd_data { | |
466 | pinmux = <PIN_PA28__SDMMC1_CMD>, | |
467 | <PIN_PA18__SDMMC1_DAT0>, | |
468 | <PIN_PA19__SDMMC1_DAT1>, | |
469 | <PIN_PA20__SDMMC1_DAT2>, | |
470 | <PIN_PA21__SDMMC1_DAT3>; | |
471 | bias-pull-up; | |
472 | }; | |
473 | ||
474 | conf-ck_cd { | |
475 | pinmux = <PIN_PA22__SDMMC1_CK>, | |
476 | <PIN_PA30__SDMMC1_CD>; | |
477 | bias-disable; | |
478 | }; | |
479 | }; | |
480 | ||
a9b672a6 LD |
481 | pinctrl_spi0_default: spi0_default { |
482 | pinmux = <PIN_PA14__SPI0_SPCK>, | |
483 | <PIN_PA15__SPI0_MOSI>, | |
484 | <PIN_PA16__SPI0_MISO>, | |
485 | <PIN_PA17__SPI0_NPCS0>; | |
486 | bias-disable; | |
487 | }; | |
488 | ||
489 | pinctrl_uart1_default: uart1_default { | |
490 | pinmux = <PIN_PD2__URXD1>, | |
491 | <PIN_PD3__UTXD1>; | |
492 | bias-disable; | |
493 | }; | |
494 | ||
495 | pinctrl_uart3_default: uart3_default { | |
496 | pinmux = <PIN_PB11__URXD3>, | |
497 | <PIN_PB12__UTXD3>; | |
498 | bias-disable; | |
499 | }; | |
ff964962 CP |
500 | |
501 | pinctrl_usb_default: usb_default { | |
502 | pinmux = <PIN_PB10__GPIO>; | |
503 | bias-disable; | |
504 | }; | |
505 | ||
506 | pinctrl_usba_vbus: usba_vbus { | |
507 | pinmux = <PIN_PA31__GPIO>; | |
508 | bias-disable; | |
509 | }; | |
510 | ||
a9b672a6 | 511 | }; |
bc6d5d76 | 512 | |
b133ca7a CP |
513 | classd: classd@fc048000 { |
514 | pinctrl-names = "default"; | |
515 | pinctrl-0 = <&pinctrl_classd_default>; | |
516 | atmel,pwm-type = "diff"; | |
517 | atmel,non-overlap-time = <10>; | |
518 | status = "okay"; | |
519 | }; | |
520 | ||
bc6d5d76 WY |
521 | can1: can@fc050000 { |
522 | pinctrl-names = "default"; | |
523 | pinctrl-0 = <&pinctrl_can1_default>; | |
524 | status = "okay"; | |
525 | }; | |
22b5a0f7 NF |
526 | }; |
527 | }; | |
c7e48d44 LD |
528 | |
529 | gpio_keys { | |
530 | compatible = "gpio-keys"; | |
531 | ||
532 | pinctrl-names = "default"; | |
533 | pinctrl-0 = <&pinctrl_key_gpio_default>; | |
534 | ||
535 | bp1 { | |
536 | label = "PB_USER"; | |
8f3a8a67 | 537 | gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; |
c7e48d44 LD |
538 | linux,code = <0x104>; |
539 | }; | |
540 | }; | |
ed0f4b3f WY |
541 | |
542 | leds { | |
543 | compatible = "gpio-leds"; | |
544 | pinctrl-names = "default"; | |
545 | pinctrl-0 = <&pinctrl_led_gpio_default>; | |
546 | status = "okay"; | |
547 | ||
548 | red { | |
549 | label = "red"; | |
8f3a8a67 | 550 | gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>; |
ed0f4b3f WY |
551 | }; |
552 | ||
8f3a8a67 | 553 | |
ed0f4b3f WY |
554 | green { |
555 | label = "green"; | |
8f3a8a67 | 556 | gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>; |
ed0f4b3f WY |
557 | }; |
558 | ||
559 | blue { | |
560 | label = "blue"; | |
8f3a8a67 | 561 | gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>; |
ed0f4b3f WY |
562 | linux,default-trigger = "heartbeat"; |
563 | }; | |
564 | }; | |
22b5a0f7 | 565 | }; |