Commit | Line | Data |
---|---|---|
e91a5555 JCPV |
1 | /* |
2 | * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board | |
3 | * | |
4 | * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5 | * | |
6 | * Licensed under GPLv2. | |
7 | */ | |
8 | /dts-v1/; | |
9 | #include "at91sam9260.dtsi" | |
10 | / { | |
11 | model = "Calao QIL A9260"; | |
12 | compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9"; | |
13 | ||
14 | chosen { | |
15 | bootargs = "console=ttyS0,115200"; | |
16 | }; | |
17 | ||
18 | memory { | |
19 | reg = <0x20000000 0x4000000>; | |
20 | }; | |
21 | ||
22 | clocks { | |
32219264 AB |
23 | slow_xtal { |
24 | clock-frequency = <32768>; | |
25 | }; | |
26 | ||
27 | main_xtal { | |
28 | clock-frequency = <12000000>; | |
29 | }; | |
e91a5555 JCPV |
30 | }; |
31 | ||
32 | ahb { | |
33 | apb { | |
1a4e63d4 AB |
34 | tcb0: timer@fffa0000 { |
35 | timer@0 { | |
36 | compatible = "atmel,tcb-timer"; | |
37 | reg = <0>, <1>; | |
38 | }; | |
39 | ||
40 | timer@2 { | |
41 | compatible = "atmel,tcb-timer"; | |
42 | reg = <2>; | |
43 | }; | |
44 | }; | |
45 | ||
e91a5555 JCPV |
46 | usb1: gadget@fffa4000 { |
47 | atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; | |
48 | status = "okay"; | |
49 | }; | |
50 | ||
51 | mmc0: mmc@fffa8000 { | |
52 | pinctrl-0 = < | |
53 | &pinctrl_mmc0_clk | |
54 | &pinctrl_mmc0_slot0_cmd_dat0 | |
55 | &pinctrl_mmc0_slot0_dat1_3>; | |
56 | status = "okay"; | |
57 | slot@0 { | |
58 | reg = <0>; | |
59 | bus-width = <4>; | |
60 | }; | |
61 | }; | |
62 | ||
63 | usart0: serial@fffb0000 { | |
64 | pinctrl-0 = | |
65 | <&pinctrl_usart0 | |
66 | &pinctrl_usart0_rts | |
67 | &pinctrl_usart0_cts | |
68 | &pinctrl_usart0_dtr_dsr | |
69 | &pinctrl_usart0_dcd | |
70 | &pinctrl_usart0_ri>; | |
71 | status = "okay"; | |
72 | }; | |
73 | ||
74 | usart1: serial@fffb4000 { | |
75 | pinctrl-0 = | |
76 | <&pinctrl_usart1 | |
77 | &pinctrl_usart1_rts | |
78 | &pinctrl_usart1_cts>; | |
79 | status = "okay"; | |
80 | }; | |
81 | ||
82 | usart2: serial@fffb8000 { | |
83 | pinctrl-0 = | |
84 | <&pinctrl_usart2 | |
85 | &pinctrl_usart2_rts | |
86 | &pinctrl_usart2_cts>; | |
87 | status = "okay"; | |
88 | }; | |
89 | ||
90 | macb0: ethernet@fffc4000 { | |
91 | phy-mode = "rmii"; | |
92 | status = "okay"; | |
93 | }; | |
94 | ||
95 | spi0: spi@fffc8000 { | |
96 | status = "okay"; | |
97 | cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>; | |
98 | ||
99 | m41t94@0 { | |
100 | compatible = "st,m41t94"; | |
101 | reg = <0>; | |
102 | spi-max-frequency = <1000000>; | |
103 | }; | |
104 | ||
105 | }; | |
106 | ||
107 | dbgu: serial@fffff200 { | |
108 | status = "okay"; | |
109 | }; | |
110 | ||
111 | shdwc@fffffd10 { | |
112 | atmel,wakeup-counter = <10>; | |
113 | atmel,wakeup-rtt-timer; | |
114 | }; | |
115 | }; | |
116 | ||
cfdc7fa5 | 117 | usb0: ohci@500000 { |
e91a5555 JCPV |
118 | num-ports = <2>; |
119 | status = "okay"; | |
120 | }; | |
121 | ||
1004a297 | 122 | ebi: ebi@10000000 { |
e91a5555 JCPV |
123 | status = "okay"; |
124 | ||
1004a297 BB |
125 | nand_controller: nand-controller { |
126 | status = "okay"; | |
127 | pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; | |
128 | pinctrl-names = "default"; | |
129 | ||
130 | nand@3 { | |
131 | reg = <0x3 0x0 0x800000>; | |
132 | rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; | |
133 | cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; | |
134 | nand-bus-width = <8>; | |
135 | nand-ecc-mode = "soft"; | |
136 | nand-on-flash-bbt; | |
137 | label = "atmel_nand"; | |
138 | ||
139 | partitions { | |
140 | compatible = "fixed-partitions"; | |
141 | #address-cells = <1>; | |
142 | #size-cells = <1>; | |
143 | ||
144 | at91bootstrap@0 { | |
145 | label = "at91bootstrap"; | |
146 | reg = <0x0 0x20000>; | |
147 | }; | |
148 | ||
149 | barebox@20000 { | |
150 | label = "barebox"; | |
151 | reg = <0x20000 0x40000>; | |
152 | }; | |
153 | ||
154 | bareboxenv@60000 { | |
155 | label = "bareboxenv"; | |
156 | reg = <0x60000 0x20000>; | |
157 | }; | |
158 | ||
159 | bareboxenv2@80000 { | |
160 | label = "bareboxenv2"; | |
161 | reg = <0x80000 0x20000>; | |
162 | }; | |
163 | ||
164 | oftree@a0000 { | |
165 | label = "oftree"; | |
166 | reg = <0xa0000 0x20000>; | |
167 | }; | |
168 | ||
169 | kernel@c0000 { | |
170 | label = "kernel"; | |
171 | reg = <0xc0000 0x400000>; | |
172 | }; | |
173 | ||
174 | rootfs@4c0000 { | |
175 | label = "rootfs"; | |
176 | reg = <0x4c0000 0x7800000>; | |
177 | }; | |
178 | ||
179 | data@7cc0000 { | |
180 | label = "data"; | |
181 | reg = <0x7cc0000 0x8340000>; | |
182 | }; | |
183 | }; | |
184 | }; | |
e91a5555 JCPV |
185 | }; |
186 | }; | |
187 | }; | |
188 | ||
189 | leds { | |
190 | compatible = "gpio-leds"; | |
191 | ||
192 | user_led { | |
193 | label = "user_led"; | |
194 | gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; | |
195 | linux,default-trigger = "heartbeat"; | |
196 | }; | |
197 | }; | |
198 | ||
199 | gpio_keys { | |
200 | compatible = "gpio-keys"; | |
201 | #address-cells = <1>; | |
202 | #size-cells = <0>; | |
203 | ||
204 | user_pb { | |
205 | label = "user_pb"; | |
206 | gpios = <&pioB 10 GPIO_ACTIVE_LOW>; | |
207 | linux,code = <28>; | |
67ae8b9b | 208 | wakeup-source; |
e91a5555 JCPV |
209 | }; |
210 | }; | |
211 | ||
e152e3f7 | 212 | i2c-gpio-0 { |
e91a5555 JCPV |
213 | status = "okay"; |
214 | }; | |
215 | }; |