Commit | Line | Data |
---|---|---|
65b697e5 EJ |
1 | // SPDX-License-Identifier: GPL-2.0-or-later |
2 | // Copyright 2022 IBM Corp. | |
3 | /dts-v1/; | |
4 | ||
5 | #include "aspeed-g6.dtsi" | |
6 | #include <dt-bindings/gpio/aspeed-gpio.h> | |
7 | #include <dt-bindings/i2c/i2c.h> | |
8 | #include <dt-bindings/leds/leds-pca955x.h> | |
9 | ||
10 | / { | |
11 | model = "Bonnell"; | |
12 | compatible = "ibm,bonnell-bmc", "aspeed,ast2600"; | |
13 | ||
14 | aliases { | |
65b697e5 EJ |
15 | serial4 = &uart5; |
16 | i2c16 = &i2c11mux0chn0; | |
17 | i2c17 = &i2c11mux0chn1; | |
18 | i2c18 = &i2c11mux0chn2; | |
19 | i2c19 = &i2c11mux0chn3; | |
65b697e5 EJ |
20 | }; |
21 | ||
22 | chosen { | |
23 | stdout-path = &uart5; | |
24 | bootargs = "console=ttyS4,115200n8 earlycon"; | |
25 | }; | |
26 | ||
27 | memory@80000000 { | |
28 | device_type = "memory"; | |
29 | reg = <0x80000000 0x40000000>; | |
30 | }; | |
31 | ||
32 | reserved-memory { | |
33 | #address-cells = <1>; | |
34 | #size-cells = <1>; | |
35 | ranges; | |
36 | ||
d2f6fc54 EJ |
37 | event_log: tcg_event_log@b3d00000 { |
38 | no-map; | |
39 | reg = <0xb3d00000 0x100000>; | |
40 | }; | |
41 | ||
65b697e5 EJ |
42 | ramoops@b3e00000 { |
43 | compatible = "ramoops"; | |
44 | reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ | |
45 | record-size = <0x8000>; | |
46 | console-size = <0x8000>; | |
47 | ftrace-size = <0x8000>; | |
48 | pmsg-size = <0x8000>; | |
49 | max-reason = <3>; /* KMSG_DUMP_EMERG */ | |
50 | }; | |
51 | ||
52 | /* LPC FW cycle bridge region requires natural alignment */ | |
53 | flash_memory: region@b4000000 { | |
54 | no-map; | |
55 | reg = <0xb4000000 0x04000000>; /* 64M */ | |
56 | }; | |
57 | ||
58 | /* VGA region is dictated by hardware strapping */ | |
59 | vga_memory: region@bf000000 { | |
60 | no-map; | |
61 | compatible = "shared-dma-pool"; | |
62 | reg = <0xbf000000 0x01000000>; /* 16M */ | |
63 | }; | |
64 | }; | |
65 | ||
66 | leds { | |
67 | compatible = "gpio-leds"; | |
68 | ||
69 | fan0 { | |
70 | gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>; | |
71 | }; | |
72 | ||
73 | fan1 { | |
74 | gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>; | |
75 | }; | |
76 | ||
77 | rear-enc-id0 { | |
78 | gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; | |
79 | }; | |
80 | ||
81 | rear-enc-fault0 { | |
82 | gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; | |
83 | }; | |
84 | }; | |
85 | ||
86 | gpio-keys-polled { | |
87 | compatible = "gpio-keys-polled"; | |
88 | #address-cells = <1>; | |
89 | #size-cells = <0>; | |
90 | poll-interval = <1000>; | |
91 | ||
92 | fan0-presence { | |
93 | label = "fan0-presence"; | |
94 | gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>; | |
95 | linux,code = <6>; | |
96 | }; | |
97 | ||
98 | fan1-presence { | |
99 | label = "fan1-presence"; | |
100 | gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>; | |
101 | linux,code = <7>; | |
102 | }; | |
103 | }; | |
104 | ||
a8cef541 | 105 | iio-hwmon { |
65b697e5 EJ |
106 | compatible = "iio-hwmon"; |
107 | io-channels = <&adc1 7>; | |
108 | }; | |
109 | }; | |
110 | ||
111 | &adc1 { | |
112 | status = "okay"; | |
113 | aspeed,int-vref-microvolt = <2500000>; | |
114 | pinctrl-names = "default"; | |
115 | pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default | |
116 | &pinctrl_adc10_default &pinctrl_adc11_default | |
117 | &pinctrl_adc12_default &pinctrl_adc13_default | |
118 | &pinctrl_adc14_default &pinctrl_adc15_default>; | |
119 | }; | |
120 | ||
121 | &ehci1 { | |
122 | status = "okay"; | |
123 | }; | |
124 | ||
125 | &uhci { | |
126 | status = "okay"; | |
127 | }; | |
128 | ||
129 | &gpio0 { | |
130 | gpio-line-names = | |
131 | /*A0-A7*/ "","","","","","","","", | |
132 | /*B0-B7*/ "","","","","","","checkstop","", | |
133 | /*C0-C7*/ "","","","","","","","", | |
134 | /*D0-D7*/ "","","","","","","","", | |
135 | /*E0-E7*/ "","","","","","","","", | |
136 | /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","", | |
137 | /*G0-G7*/ "fan0","fan1","","","","","","", | |
138 | /*H0-H7*/ "","","rear-enc-id0","rear-enc-fault0","","","","", | |
139 | /*I0-I7*/ "","","","","","","bmc-secure-boot","", | |
140 | /*J0-J7*/ "","","","","","","","", | |
141 | /*K0-K7*/ "","","","","","","","", | |
142 | /*L0-L7*/ "","","","","","","","", | |
143 | /*M0-M7*/ "","","","","","","","", | |
144 | /*N0-N7*/ "","","","","","","","", | |
145 | /*O0-O7*/ "","","","usb-power","","","","", | |
146 | /*P0-P7*/ "","","","","","","","", | |
147 | /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", | |
148 | /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", | |
149 | /*S0-S7*/ "presence-ps0","presence-ps1","","","power-ffs-sync-history","","","", | |
150 | /*T0-T7*/ "","","","","","","","", | |
151 | /*U0-U7*/ "","","","","","","","", | |
152 | /*V0-V7*/ "","","","","","","","", | |
153 | /*W0-W7*/ "","","","","","","","", | |
154 | /*X0-X7*/ "","","","","","","","", | |
155 | /*Y0-Y7*/ "","","","","","","","", | |
156 | /*Z0-Z7*/ "","","","","","","",""; | |
157 | ||
158 | usb_power { | |
159 | gpio-hog; | |
160 | gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; | |
161 | output-high; | |
162 | }; | |
163 | }; | |
164 | ||
165 | &emmc_controller { | |
166 | status = "okay"; | |
167 | }; | |
168 | ||
169 | &pinctrl_emmc_default { | |
170 | bias-disable; | |
171 | }; | |
172 | ||
173 | &emmc { | |
174 | status = "okay"; | |
175 | clk-phase-mmc-hs200 = <180>, <180>; | |
176 | }; | |
177 | ||
65b697e5 EJ |
178 | &ibt { |
179 | status = "okay"; | |
180 | }; | |
181 | ||
182 | &i2c0 { | |
183 | status = "okay"; | |
184 | ||
185 | eeprom@51 { | |
186 | compatible = "atmel,24c64"; | |
187 | reg = <0x51>; | |
188 | }; | |
189 | ||
190 | tca9554@20 { | |
191 | compatible = "ti,tca9554"; | |
192 | reg = <0x20>; | |
193 | #address-cells = <1>; | |
194 | #size-cells = <0>; | |
195 | ||
196 | gpio-controller; | |
197 | #gpio-cells = <2>; | |
198 | ||
199 | gpio-line-names = "", | |
200 | "RUSSEL_FW_I2C_ENABLE_N", | |
201 | "RUSSEL_OPPANEL_PRESENCE_N", | |
202 | "BLYTH_OPPANEL_PRESENCE_N", | |
203 | "CPU_TPM_CARD_PRESENT_N", | |
204 | "", | |
205 | "", | |
206 | "DASD_BP_PRESENT_N"; | |
207 | }; | |
208 | }; | |
209 | ||
210 | &i2c1 { | |
211 | status = "okay"; | |
212 | }; | |
213 | ||
214 | &i2c2 { | |
215 | status = "okay"; | |
216 | ||
217 | ucd90160@64 { | |
218 | compatible = "ti,ucd90160"; | |
219 | reg = <0x64>; | |
220 | }; | |
221 | }; | |
222 | ||
223 | &i2c3 { | |
224 | status = "okay"; | |
225 | ||
9bdc19fb LY |
226 | power-supply@5a { |
227 | compatible = "acbel,fsg032"; | |
228 | reg = <0x5a>; | |
65b697e5 EJ |
229 | }; |
230 | ||
9bdc19fb LY |
231 | power-supply@5b { |
232 | compatible = "acbel,fsg032"; | |
233 | reg = <0x5b>; | |
65b697e5 EJ |
234 | }; |
235 | }; | |
236 | ||
237 | &i2c4 { | |
238 | status = "okay"; | |
239 | }; | |
240 | ||
241 | &i2c5 { | |
242 | status = "okay"; | |
243 | }; | |
244 | ||
245 | &i2c6 { | |
246 | status = "okay"; | |
247 | }; | |
248 | ||
249 | &i2c7 { | |
250 | multi-master; | |
251 | status = "okay"; | |
252 | ||
253 | si7021-a20@40 { | |
254 | compatible = "silabs,si7020"; | |
255 | reg = <0x40>; | |
256 | }; | |
257 | ||
258 | tmp275@48 { | |
259 | compatible = "ti,tmp275"; | |
260 | reg = <0x48>; | |
261 | }; | |
262 | ||
263 | eeprom@50 { | |
264 | compatible = "atmel,24c64"; | |
265 | reg = <0x50>; | |
266 | }; | |
267 | ||
268 | eeprom@51 { | |
269 | compatible = "atmel,24c64"; | |
270 | reg = <0x51>; | |
271 | }; | |
272 | ||
273 | max31785@52 { | |
274 | compatible = "maxim,max31785a"; | |
275 | reg = <0x52>; | |
276 | #address-cells = <1>; | |
277 | #size-cells = <0>; | |
278 | ||
279 | fan0: fan@0 { | |
280 | compatible = "pmbus-fan"; | |
281 | reg = <0>; | |
282 | tach-pulses = <2>; | |
283 | }; | |
284 | ||
285 | fan1: fan@1 { | |
286 | compatible = "pmbus-fan"; | |
287 | reg = <1>; | |
288 | tach-pulses = <2>; | |
289 | }; | |
290 | }; | |
291 | ||
292 | pca9551@60 { | |
293 | compatible = "nxp,pca9551"; | |
294 | reg = <0x60>; | |
295 | #address-cells = <1>; | |
296 | #size-cells = <0>; | |
297 | ||
298 | gpio-controller; | |
299 | #gpio-cells = <2>; | |
300 | ||
301 | led@0 { | |
302 | label = "front-sys-id0"; | |
303 | reg = <0>; | |
304 | retain-state-shutdown; | |
305 | default-state = "keep"; | |
306 | type = <PCA955X_TYPE_LED>; | |
307 | }; | |
308 | ||
309 | led@1 { | |
310 | label = "front-check-log0"; | |
311 | reg = <1>; | |
312 | retain-state-shutdown; | |
313 | default-state = "keep"; | |
314 | type = <PCA955X_TYPE_LED>; | |
315 | }; | |
316 | ||
317 | led@2 { | |
318 | label = "front-enc-fault1"; | |
319 | reg = <2>; | |
320 | retain-state-shutdown; | |
321 | default-state = "keep"; | |
322 | type = <PCA955X_TYPE_LED>; | |
323 | }; | |
324 | ||
325 | led@3 { | |
326 | label = "front-sys-pwron0"; | |
327 | reg = <3>; | |
328 | retain-state-shutdown; | |
329 | default-state = "keep"; | |
330 | type = <PCA955X_TYPE_LED>; | |
331 | }; | |
332 | }; | |
333 | ||
334 | ibm-panel@62 { | |
335 | compatible = "ibm,op-panel"; | |
336 | reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; | |
337 | }; | |
338 | ||
339 | dps: dps310@76 { | |
340 | compatible = "infineon,dps310"; | |
341 | reg = <0x76>; | |
342 | #io-channel-cells = <0>; | |
343 | }; | |
344 | }; | |
345 | ||
346 | &i2c8 { | |
347 | status = "okay"; | |
348 | ||
349 | rtc@32 { | |
350 | compatible = "epson,rx8900"; | |
351 | reg = <0x32>; | |
352 | }; | |
353 | ||
354 | tmp275@48 { | |
355 | compatible = "ti,tmp275"; | |
356 | reg = <0x48>; | |
357 | }; | |
358 | ||
359 | eeprom@50 { | |
bb13bd58 | 360 | compatible = "atmel,24c128"; |
65b697e5 EJ |
361 | reg = <0x50>; |
362 | }; | |
363 | ||
364 | pca9551@60 { | |
365 | compatible = "nxp,pca9551"; | |
366 | reg = <0x60>; | |
367 | #address-cells = <1>; | |
368 | #size-cells = <0>; | |
369 | ||
370 | gpio-controller; | |
371 | #gpio-cells = <2>; | |
372 | ||
373 | gpio-line-names = "", | |
374 | "APSS_RESET_N", | |
375 | "", | |
376 | "N_MODE_CPU_N", | |
377 | "", | |
378 | "", | |
379 | "P10_DCM_PRESENT", | |
380 | ""; | |
381 | }; | |
382 | }; | |
383 | ||
384 | &i2c9 { | |
385 | status = "okay"; | |
386 | ||
387 | tmp423a@4c { | |
388 | compatible = "ti,tmp423"; | |
389 | reg = <0x4c>; | |
390 | }; | |
391 | }; | |
392 | ||
393 | &i2c10 { | |
394 | status = "okay"; | |
395 | }; | |
396 | ||
397 | &i2c11 { | |
398 | status = "okay"; | |
399 | ||
400 | tca9554@20 { | |
401 | compatible = "ti,tca9554"; | |
402 | reg = <0x20>; | |
403 | #address-cells = <1>; | |
404 | #size-cells = <0>; | |
405 | ||
406 | gpio-controller; | |
407 | #gpio-cells = <2>; | |
408 | ||
409 | gpio-line-names = "BOOT_RCVRY_TWI", | |
410 | "BOOT_RCVRY_UART", | |
411 | "", | |
412 | "", | |
413 | "", | |
414 | "", | |
415 | "", | |
416 | "PE_SWITCH_RSTB_N"; | |
417 | }; | |
418 | ||
419 | tmp435@4c { | |
420 | compatible = "ti,tmp435"; | |
421 | reg = <0x4c>; | |
422 | }; | |
423 | ||
424 | pca9849@75 { | |
d9b6c322 | 425 | compatible = "nxp,pca9849"; |
65b697e5 EJ |
426 | reg = <0x75>; |
427 | #address-cells = <1>; | |
428 | #size-cells = <0>; | |
429 | status = "okay"; | |
430 | i2c-mux-idle-disconnect; | |
431 | ||
432 | i2c11mux0chn0: i2c@0 { | |
433 | #address-cells = <1>; | |
434 | #size-cells = <0>; | |
435 | reg = <0>; | |
436 | }; | |
437 | ||
438 | i2c11mux0chn1: i2c@1 { | |
439 | #address-cells = <1>; | |
440 | #size-cells = <0>; | |
441 | reg = <1>; | |
442 | }; | |
443 | ||
444 | i2c11mux0chn2: i2c@2 { | |
445 | #address-cells = <1>; | |
446 | #size-cells = <0>; | |
447 | reg = <2>; | |
448 | }; | |
449 | ||
450 | i2c11mux0chn3: i2c@3 { | |
451 | #address-cells = <1>; | |
452 | #size-cells = <0>; | |
453 | reg = <3>; | |
454 | }; | |
455 | }; | |
456 | }; | |
457 | ||
458 | &i2c12 { | |
459 | status = "okay"; | |
460 | ||
461 | tpm@2e { | |
d2f6fc54 | 462 | compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; |
65b697e5 | 463 | reg = <0x2e>; |
d2f6fc54 | 464 | memory-region = <&event_log>; |
65b697e5 EJ |
465 | }; |
466 | ||
467 | eeprom@50 { | |
468 | compatible = "atmel,24c64"; | |
469 | reg = <0x50>; | |
470 | }; | |
471 | }; | |
472 | ||
473 | &i2c13 { | |
474 | status = "okay"; | |
475 | ||
476 | eeprom@50 { | |
477 | compatible = "atmel,24c64"; | |
478 | reg = <0x50>; | |
479 | }; | |
480 | ||
481 | pca9551@60 { | |
482 | compatible = "nxp,pca9551"; | |
483 | reg = <0x60>; | |
484 | #address-cells = <1>; | |
485 | #size-cells = <0>; | |
486 | ||
487 | gpio-controller; | |
488 | #gpio-cells = <2>; | |
489 | ||
490 | led@0 { | |
48286e1f | 491 | label = "nvme3"; |
65b697e5 EJ |
492 | reg = <0>; |
493 | retain-state-shutdown; | |
494 | default-state = "keep"; | |
495 | type = <PCA955X_TYPE_LED>; | |
496 | }; | |
497 | ||
498 | led@1 { | |
48286e1f | 499 | label = "nvme2"; |
65b697e5 EJ |
500 | reg = <1>; |
501 | retain-state-shutdown; | |
502 | default-state = "keep"; | |
503 | type = <PCA955X_TYPE_LED>; | |
504 | }; | |
505 | ||
506 | led@2 { | |
48286e1f | 507 | label = "nvme1"; |
65b697e5 EJ |
508 | reg = <2>; |
509 | retain-state-shutdown; | |
510 | default-state = "keep"; | |
511 | type = <PCA955X_TYPE_LED>; | |
512 | }; | |
513 | ||
514 | led@3 { | |
48286e1f | 515 | label = "nvme0"; |
65b697e5 EJ |
516 | reg = <3>; |
517 | retain-state-shutdown; | |
518 | default-state = "keep"; | |
519 | type = <PCA955X_TYPE_LED>; | |
520 | }; | |
521 | }; | |
522 | }; | |
523 | ||
524 | &i2c14 { | |
525 | status = "okay"; | |
526 | }; | |
527 | ||
528 | &i2c15 { | |
529 | status = "okay"; | |
530 | }; | |
531 | ||
1480bcf0 EJ |
532 | &uart2 { |
533 | status = "okay"; | |
534 | }; | |
535 | ||
65b697e5 EJ |
536 | &vuart1 { |
537 | status = "okay"; | |
538 | }; | |
539 | ||
540 | &vuart2 { | |
541 | status = "okay"; | |
542 | }; | |
543 | ||
544 | &lpc_ctrl { | |
545 | status = "okay"; | |
546 | memory-region = <&flash_memory>; | |
547 | }; | |
548 | ||
549 | &mac2 { | |
550 | status = "okay"; | |
551 | pinctrl-names = "default"; | |
552 | pinctrl-0 = <&pinctrl_rmii3_default>; | |
553 | clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, | |
554 | <&syscon ASPEED_CLK_MAC3RCLK>; | |
555 | clock-names = "MACCLK", "RCLK"; | |
556 | use-ncsi; | |
557 | }; | |
558 | ||
65b697e5 EJ |
559 | &wdt1 { |
560 | aspeed,reset-type = "none"; | |
561 | aspeed,external-signal; | |
562 | aspeed,ext-push-pull; | |
563 | aspeed,ext-active-high; | |
564 | ||
565 | pinctrl-names = "default"; | |
566 | pinctrl-0 = <&pinctrl_wdtrst1_default>; | |
567 | }; | |
568 | ||
569 | &wdt2 { | |
570 | status = "okay"; | |
571 | }; | |
572 | ||
573 | &xdma { | |
574 | status = "okay"; | |
575 | memory-region = <&vga_memory>; | |
576 | }; | |
577 | ||
578 | &kcs2 { | |
579 | status = "okay"; | |
580 | aspeed,lpc-io-reg = <0xca8 0xcac>; | |
581 | }; | |
582 | ||
583 | &kcs3 { | |
584 | status = "okay"; | |
585 | aspeed,lpc-io-reg = <0xca2>; | |
586 | aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; | |
587 | }; | |
f868aab8 JS |
588 | |
589 | #include "ibm-power10-dual.dtsi" | |
590 | ||
591 | &cfam0_i2c10 { | |
592 | eeprom@50 { | |
593 | compatible = "atmel,at30tse004a"; | |
594 | reg = <0x50>; | |
595 | }; | |
596 | }; | |
597 | ||
598 | &cfam0_i2c11 { | |
599 | eeprom@50 { | |
600 | compatible = "atmel,at30tse004a"; | |
601 | reg = <0x50>; | |
602 | }; | |
603 | }; | |
604 | ||
605 | &cfam0_i2c12 { | |
606 | eeprom@50 { | |
607 | compatible = "atmel,at30tse004a"; | |
608 | reg = <0x50>; | |
609 | }; | |
610 | }; | |
611 | ||
612 | &cfam0_i2c13 { | |
613 | eeprom@50 { | |
614 | compatible = "atmel,at30tse004a"; | |
615 | reg = <0x50>; | |
616 | }; | |
617 | }; |