[linux-2.6-block.git] / arch / arm / boot / dts / armada-xp-synology-ds414.dts

/*
 * Device Tree file for Synology DS414
 *
 * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 *
 * Note: this Device Tree assumes that the bootloader has remapped the
 * internal registers to 0xf1000000 (instead of the old 0xd0000000).
 * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
 * bootloaders provided by Marvell. It is used in recent versions of
 * DSM software provided by Synology. Nonetheless, some earlier boards
 * were delivered with an older version of u-boot that left internal
 * registers mapped at 0xd0000000. If you have such a device you will
 * not be able to directly boot a kernel based on this Device Tree. In
 * that case, the preferred solution is to update your bootloader (e.g.
 * by upgrading to latest version of DSM, or building a new one and
 * installing it from u-boot prompt) or adjust the Devive Tree
 * (s/0xf1000000/0xd0000000/ in 'ranges' below).
 */

/dts-v1/;

#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-xp-mv78230.dtsi"

/ {
	model = "Synology DS414";
	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
		     "marvell,armadaxp", "marvell,armada-370-xp";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@0 {
		device_type = "memory";
		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
	};

	soc {
		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;

		internal-regs {

			/* RTC is provided by Seiko S-35390A below */
			rtc@10300 {
				status = "disabled";
			};

			i2c@11000 {
				clock-frequency = <400000>;
				status = "okay";

				s35390a: s35390a@30 {
					 compatible = "sii,s35390a";
					 reg = <0x30>;
				};
			};

			/* Connected to a header on device's PCB. This
			 * provides the main console for the device.
			 *
			 * Warning: the device may not boot with a 3.3V
			 * USB-serial converter connected when the power
			 * button is pressed. The converter needs to be
			 * connected a few seconds after pressing the
			 * power button. This is possibly due to UART0_TXD
			 * pin being sampled at reset (bit 0 of SAR).
			 */
			serial@12000 {
				status = "okay";
			};

			/* Connected to a Microchip PIC16F883 for power control */
			serial@12100 {
				status = "okay";
			};

			poweroff@12100 {
				compatible = "synology,power-off";
				reg = <0x12100 0x100>;
				clocks = <&coreclk 0>;
			};

			/* Front USB 2.0 port */
			usb@50000 {
				status = "okay";
			};

			ethernet@70000 {
				status = "okay";
				pinctrl-0 = <&ge0_rgmii_pins>;
				pinctrl-names = "default";
				phy = <&phy1>;
				phy-mode = "rgmii-id";
			};

			ethernet@74000 {
				pinctrl-0 = <&ge1_rgmii_pins>;
				pinctrl-names = "default";
				status = "okay";
				phy = <&phy0>;
				phy-mode = "rgmii-id";
			};
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
			     &sata3_pwr_pin &sata4_pwr_pin>;
		pinctrl-names = "default";

		sata1_regulator: sata1-regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "SATA1 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			startup-delay-us = <2000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		};

		sata2_regulator: sata2-regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "SATA2 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			startup-delay-us = <4000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
		};

		sata3_regulator: sata3-regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "SATA3 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			startup-delay-us = <6000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
		};

		sata4_regulator: sata4-regulator@4 {
			compatible = "regulator-fixed";
			reg = <4>;
			regulator-name = "SATA4 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			startup-delay-us = <8000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
		};
	};
};

&pciec {
	status = "okay";

	/*
	 * Connected to Marvell 88SX7042 SATA-II controller
	 * handling the four disks.
	 */
	pcie@1,0 {
		/* Port 0, Lane 0 */
		status = "okay";
	};

	/*
	 * Connected to EtronTech EJ168A XHCI controller
	 * providing the two rear USB 3.0 ports.
	 */
	pcie@5,0 {
		/* Port 1, Lane 0 */
		status = "okay";
	};
};


&mdio {
	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
		reg = <0>;
	};

	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
		reg = <1>;
	};
};

&pinctrl {
	sata1_pwr_pin: sata1-pwr-pin {
		marvell,pins = "mpp42";
		marvell,function = "gpio";
	};

	sata2_pwr_pin: sata2-pwr-pin {
		marvell,pins = "mpp44";
		marvell,function = "gpio";
	};

	sata3_pwr_pin: sata3-pwr-pin {
		marvell,pins = "mpp45";
		marvell,function = "gpio";
	};

	sata4_pwr_pin: sata4-pwr-pin {
		marvell,pins = "mpp46";
		marvell,function = "gpio";
	};

	sata1_pres_pin: sata1-pres-pin {
		marvell,pins = "mpp34";
		marvell,function = "gpio";
	};

	sata2_pres_pin: sata2-pres-pin {
		marvell,pins = "mpp35";
		marvell,function = "gpio";
	};

	sata3_pres_pin: sata3-pres-pin {
		marvell,pins = "mpp40";
		marvell,function = "gpio";
	};

	sata4_pres_pin: sata4-pres-pin {
		marvell,pins = "mpp41";
		marvell,function = "gpio";
	};

	syno_id_bit0_pin: syno-id-bit0-pin {
		marvell,pins = "mpp26";
		marvell,function = "gpio";
	};

	syno_id_bit1_pin: syno-id-bit1-pin {
		marvell,pins = "mpp28";
		marvell,function = "gpio";
	};

	syno_id_bit2_pin: syno-id-bit2-pin {
		marvell,pins = "mpp29";
		marvell,function = "gpio";
	};

	fan1_alarm_pin: fan1-alarm-pin {
		marvell,pins = "mpp33";
		marvell,function = "gpio";
	};

	fan2_alarm_pin: fan2-alarm-pin {
		marvell,pins = "mpp32";
		marvell,function = "gpio";
	};
};

&spi0 {
	status = "okay";

	spi-flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q064", "jedec,spi-nor";
		reg = <0>; /* Chip select 0 */
		spi-max-frequency = <20000000>;

		/*
		 * Warning!
		 *
		 * Synology u-boot uses its compiled-in environment
		 * and it seems Synology did not care to change u-boot
		 * default configuration in order to allow saving a
		 * modified environment at a sensible location. So,
		 * if you do a 'saveenv' under u-boot, your modified
		 * environment will be saved at 1MB after the start
		 * of the flash, i.e. in the middle of the uImage.
		 * For that reason, it is strongly advised not to
		 * change the default environment, unless you know
		 * what you are doing.
		 */
		partition@0 { /* u-boot */
			label = "RedBoot";
			reg = <0x00000000 0x000d0000>; /* 832KB */
		};

		partition@c0000 { /* uImage */
			label = "zImage";
			reg = <0x000d0000 0x002d0000>; /* 2880KB */
		};

		partition@3a0000 { /* uInitramfs */
			label = "rd.gz";
			reg = <0x003a0000 0x00430000>; /* 4250KB */
		};

		partition@7d0000 { /* MAC address and serial number */
			label = "vendor";
			reg = <0x007d0000 0x00010000>; /* 64KB */
		};

		partition@7e0000 {
			label = "RedBoot config";
			reg = <0x007e0000 0x00010000>; /* 64KB */
		};

		partition@7f0000 {
			label = "FIS directory";
			reg = <0x007f0000 0x00010000>; /* 64KB */
		};
	};
};
Commit	Line	Data
389c74aa AE	1	/*
	2	* Device Tree file for Synology DS414
	3	*
	4	* Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
	5	*
3c21b5fa GC	6	* This file is dual-licensed: you can use it either under the terms
	7	* of the GPL or the X11 license, at your option. Note that this dual
	8	* licensing only applies to this file, and not this project as a
	9	* whole.
	10	*
	11	* a) This file is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of the
	14	* License, or (at your option) any later version.
	15	*
24f0b6fe	16	* This file is distributed in the hope that it will be useful,
3c21b5fa GC	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
24f0b6fe	21	* Or, alternatively,
3c21b5fa GC	22	*
	23	* b) Permission is hereby granted, free of charge, to any person
	24	* obtaining a copy of this software and associated documentation
	25	* files (the "Software"), to deal in the Software without
24f0b6fe	26	* restriction, including without limitation the rights to use,
3c21b5fa GC	27	* copy, modify, merge, publish, distribute, sublicense, and/or
	28	* sell copies of the Software, and to permit persons to whom the
	29	* Software is furnished to do so, subject to the following
	30	* conditions:
	31	*
	32	* The above copyright notice and this permission notice shall be
	33	* included in all copies or substantial portions of the Software.
	34	*
24f0b6fe	35	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
3c21b5fa GC	36	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	37	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	38	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
24f0b6fe	39	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
3c21b5fa GC	40	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	41	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	42	* OTHER DEALINGS IN THE SOFTWARE.
389c74aa AE	43	*
	44	* Note: this Device Tree assumes that the bootloader has remapped the
	45	* internal registers to 0xf1000000 (instead of the old 0xd0000000).
	46	* The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
	47	* bootloaders provided by Marvell. It is used in recent versions of
	48	* DSM software provided by Synology. Nonetheless, some earlier boards
	49	* were delivered with an older version of u-boot that left internal
	50	* registers mapped at 0xd0000000. If you have such a device you will
	51	* not be able to directly boot a kernel based on this Device Tree. In
	52	* that case, the preferred solution is to update your bootloader (e.g.
	53	* by upgrading to latest version of DSM, or building a new one and
	54	* installing it from u-boot prompt) or adjust the Devive Tree
	55	* (s/0xf1000000/0xd0000000/ in 'ranges' below).
	56	*/
	57
	58	/dts-v1/;
	59
	60	#include <dt-bindings/input/input.h>
	61	#include <dt-bindings/gpio/gpio.h>
	62	#include "armada-xp-mv78230.dtsi"
	63
	64	/ {
	65	model = "Synology DS414";
	66	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
	67	"marvell,armadaxp", "marvell,armada-370-xp";
	68
	69	chosen {
9552203c	70	stdout-path = "serial0:115200n8";
389c74aa AE	71	};
389c74aa AE	72
6f477f43	73	memory@0 {
389c74aa AE	74	device_type = "memory";
	75	reg = <0 0x00000000 0 0x40000000>; /* 1GB */
	76	};
	77
	78	soc {
	79	ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
c466d997	80	MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
d7d5a43c TP	81	MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
d7d5a43c TP	82	MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
389c74aa	83
389c74aa AE	84	internal-regs {
	85
	86	/* RTC is provided by Seiko S-35390A below */
	87	rtc@10300 {
	88	status = "disabled";
	89	};
	90
389c74aa AE	91	i2c@11000 {
	92	clock-frequency = <400000>;
	93	status = "okay";
	94
	95	s35390a: s35390a@30 {
	96	compatible = "sii,s35390a";
	97	reg = <0x30>;
	98	};
	99	};
	100
	101	/* Connected to a header on device's PCB. This
	102	* provides the main console for the device.
	103	*
	104	* Warning: the device may not boot with a 3.3V
	105	* USB-serial converter connected when the power
	106	* button is pressed. The converter needs to be
	107	* connected a few seconds after pressing the
	108	* power button. This is possibly due to UART0_TXD
	109	* pin being sampled at reset (bit 0 of SAR).
	110	*/
	111	serial@12000 {
	112	status = "okay";
	113	};
	114
	115	/* Connected to a Microchip PIC16F883 for power control */
	116	serial@12100 {
	117	status = "okay";
	118	};
	119
	120	poweroff@12100 {
	121	compatible = "synology,power-off";
	122	reg = <0x12100 0x100>;
	123	clocks = <&coreclk 0>;
	124	};
	125
	126	/* Front USB 2.0 port */
	127	usb@50000 {
	128	status = "okay";
	129	};
	130
389c74aa AE	131	ethernet@70000 {
389c74aa AE	132	status = "okay";
70ee4e9d	133	pinctrl-0 = <&ge0_rgmii_pins>;
389c74aa AE	134	pinctrl-names = "default";
	135	phy = <&phy1>;
	136	phy-mode = "rgmii-id";
	137	};
	138
	139	ethernet@74000 {
70ee4e9d	140	pinctrl-0 = <&ge1_rgmii_pins>;
389c74aa AE	141	pinctrl-names = "default";
	142	status = "okay";
	143	phy = <&phy0>;
	144	phy-mode = "rgmii-id";
	145	};
	146	};
	147	};
	148
	149	regulators {
	150	compatible = "simple-bus";
	151	#address-cells = <1>;
	152	#size-cells = <0>;
	153	pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
	154	&sata3_pwr_pin &sata4_pwr_pin>;
	155	pinctrl-names = "default";
	156
baa2f744	157	sata1_regulator: sata1-regulator@1 {
389c74aa AE	158	compatible = "regulator-fixed";
	159	reg = <1>;
	160	regulator-name = "SATA1 Power";
	161	regulator-min-microvolt = <5000000>;
	162	regulator-max-microvolt = <5000000>;
	163	startup-delay-us = <2000000>;
	164	enable-active-high;
	165	regulator-always-on;
	166	regulator-boot-on;
	167	gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
	168	};
	169
baa2f744	170	sata2_regulator: sata2-regulator@2 {
389c74aa AE	171	compatible = "regulator-fixed";
	172	reg = <2>;
	173	regulator-name = "SATA2 Power";
	174	regulator-min-microvolt = <5000000>;
	175	regulator-max-microvolt = <5000000>;
	176	startup-delay-us = <4000000>;
	177	enable-active-high;
	178	regulator-always-on;
	179	regulator-boot-on;
	180	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	181	};
	182
baa2f744	183	sata3_regulator: sata3-regulator@3 {
389c74aa AE	184	compatible = "regulator-fixed";
	185	reg = <3>;
	186	regulator-name = "SATA3 Power";
	187	regulator-min-microvolt = <5000000>;
	188	regulator-max-microvolt = <5000000>;
	189	startup-delay-us = <6000000>;
	190	enable-active-high;
	191	regulator-always-on;
	192	regulator-boot-on;
	193	gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
	194	};
	195
baa2f744	196	sata4_regulator: sata4-regulator@4 {
389c74aa AE	197	compatible = "regulator-fixed";
	198	reg = <4>;
	199	regulator-name = "SATA4 Power";
	200	regulator-min-microvolt = <5000000>;
	201	regulator-max-microvolt = <5000000>;
	202	startup-delay-us = <8000000>;
	203	enable-active-high;
	204	regulator-always-on;
	205	regulator-boot-on;
	206	gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
	207	};
	208	};
	209	};
	210
007d05d8 GC	211	&pciec {
	212	status = "okay";
	213
	214	/*
	215	* Connected to Marvell 88SX7042 SATA-II controller
	216	* handling the four disks.
	217	*/
	218	pcie@1,0 {
	219	/* Port 0, Lane 0 */
	220	status = "okay";
	221	};
	222
	223	/*
	224	* Connected to EtronTech EJ168A XHCI controller
	225	* providing the two rear USB 3.0 ports.
	226	*/
	227	pcie@5,0 {
	228	/* Port 1, Lane 0 */
	229	status = "okay";
	230	};
	231	};
	232
	233
1fc21295 GC	234	&mdio {
	235	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
	236	reg = <0>;
	237	};
	238
	239	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
	240	reg = <1>;
	241	};
	242	};
	243
389c74aa AE	244	&pinctrl {
	245	sata1_pwr_pin: sata1-pwr-pin {
	246	marvell,pins = "mpp42";
	247	marvell,function = "gpio";
	248	};
	249
	250	sata2_pwr_pin: sata2-pwr-pin {
	251	marvell,pins = "mpp44";
	252	marvell,function = "gpio";
	253	};
	254
	255	sata3_pwr_pin: sata3-pwr-pin {
	256	marvell,pins = "mpp45";
	257	marvell,function = "gpio";
	258	};
	259
	260	sata4_pwr_pin: sata4-pwr-pin {
	261	marvell,pins = "mpp46";
	262	marvell,function = "gpio";
	263	};
	264
	265	sata1_pres_pin: sata1-pres-pin {
	266	marvell,pins = "mpp34";
	267	marvell,function = "gpio";
	268	};
	269
	270	sata2_pres_pin: sata2-pres-pin {
	271	marvell,pins = "mpp35";
	272	marvell,function = "gpio";
	273	};
	274
	275	sata3_pres_pin: sata3-pres-pin {
	276	marvell,pins = "mpp40";
	277	marvell,function = "gpio";
	278	};
	279
	280	sata4_pres_pin: sata4-pres-pin {
	281	marvell,pins = "mpp41";
	282	marvell,function = "gpio";
	283	};
	284
	285	syno_id_bit0_pin: syno-id-bit0-pin {
	286	marvell,pins = "mpp26";
	287	marvell,function = "gpio";
	288	};
	289
a02fe645	290	syno_id_bit1_pin: syno-id-bit1-pin {
389c74aa AE	291	marvell,pins = "mpp28";
	292	marvell,function = "gpio";
	293	};
	294
a02fe645	295	syno_id_bit2_pin: syno-id-bit2-pin {
389c74aa AE	296	marvell,pins = "mpp29";
	297	marvell,function = "gpio";
	298	};
	299
a02fe645	300	fan1_alarm_pin: fan1-alarm-pin {
389c74aa AE	301	marvell,pins = "mpp33";
	302	marvell,function = "gpio";
	303	};
	304
	305	fan2_alarm_pin: fan2-alarm-pin {
	306	marvell,pins = "mpp32";
	307	marvell,function = "gpio";
	308	};
	309	};
0160a4b6 SR	310
	311	&spi0 {
	312	status = "okay";
	313
	314	spi-flash@0 {
	315	#address-cells = <1>;
	316	#size-cells = <1>;
	317	compatible = "micron,n25q064", "jedec,spi-nor";
	318	reg = <0>; /* Chip select 0 */
	319	spi-max-frequency = <20000000>;
	320
	321	/*
	322	* Warning!
	323	*
	324	* Synology u-boot uses its compiled-in environment
	325	* and it seems Synology did not care to change u-boot
	326	* default configuration in order to allow saving a
	327	* modified environment at a sensible location. So,
	328	* if you do a 'saveenv' under u-boot, your modified
	329	* environment will be saved at 1MB after the start
	330	* of the flash, i.e. in the middle of the uImage.
	331	* For that reason, it is strongly advised not to
	332	* change the default environment, unless you know
	333	* what you are doing.
	334	*/
8dccafaa	335	partition@0 { /* u-boot */
0160a4b6 SR	336	label = "RedBoot";
	337	reg = <0x00000000 0x000d0000>; /* 832KB */
	338	};
	339
8dccafaa	340	partition@c0000 { /* uImage */
0160a4b6 SR	341	label = "zImage";
	342	reg = <0x000d0000 0x002d0000>; /* 2880KB */
	343	};
	344
8dccafaa	345	partition@3a0000 { /* uInitramfs */
0160a4b6 SR	346	label = "rd.gz";
	347	reg = <0x003a0000 0x00430000>; /* 4250KB */
	348	};
	349
8dccafaa	350	partition@7d0000 { /* MAC address and serial number */
0160a4b6 SR	351	label = "vendor";
	352	reg = <0x007d0000 0x00010000>; /* 64KB */
	353	};
	354
8dccafaa	355	partition@7e0000 {
0160a4b6 SR	356	label = "RedBoot config";
	357	reg = <0x007e0000 0x00010000>; /* 64KB */
	358	};
	359
8dccafaa	360	partition@7f0000 {
0160a4b6 SR	361	label = "FIS directory";
	362	reg = <0x007f0000 0x00010000>; /* 64KB */
	363	};
	364	};
	365	};