projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| ad8a15d9 JCPV |
1 | /* |
| 2 | * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards | |
| 3 | * | |
| 4 | * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
| 5 | * | |
| 6 | * Licensed under GPLv2 only. | |
| 7 | */ | |
| 8 | ||
| 9 | /dts-v1/; | |
| 6db64d29 | 10 | #include "at91sam9260.dtsi" |
| ad8a15d9 JCPV |
11 | |
| 12 | / { | |
| 13 | model = "Somfy Animeo IP"; | |
| 14 | compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; | |
| 15 | ||
| 16 | aliases { | |
| 17 | serial0 = &usart1; | |
| 18 | serial1 = &usart2; | |
| 19 | serial2 = &usart0; | |
| 20 | serial3 = &dbgu; | |
| 21 | serial4 = &usart3; | |
| 22 | serial5 = &uart0; | |
| 23 | serial6 = &uart1; | |
| 24 | }; | |
| 25 | ||
| 26 | chosen { | |
| 27 | linux,stdout-path = &usart2; | |
| 28 | }; | |
| 29 | ||
| 30 | memory { | |
| 31 | reg = <0x20000000 0x4000000>; | |
| 32 | }; | |
| 33 | ||
| 34 | clocks { | |
| 650defcf AB |
35 | slow_xtal { |
| 36 | clock-frequency = <32768>; | |
| 37 | }; | |
| 38 | ||
| 39 | main_xtal { | |
| 40 | clock-frequency = <18432000>; | |
| 41 | }; | |
| ad8a15d9 JCPV |
42 | }; |
| 43 | ||
| 44 | ahb { | |
| 45 | apb { | |
| 46 | usart0: serial@fffb0000 { | |
| 47 | pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; | |
| 48 | linux,rs485-enabled-at-boot-time; | |
| 49 | status = "okay"; | |
| 50 | }; | |
| 51 | ||
| 52 | usart1: serial@fffb4000 { | |
| 53 | pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; | |
| 54 | linux,rs485-enabled-at-boot-time; | |
| 55 | status = "okay"; | |
| 56 | }; | |
| 57 | ||
| 58 | usart2: serial@fffb8000 { | |
| 59 | pinctrl-0 = <&pinctrl_usart2>; | |
| 60 | status = "okay"; | |
| 61 | }; | |
| 62 | ||
| 63 | macb0: ethernet@fffc4000 { | |
| 64 | pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; | |
| 65 | phy-mode = "mii"; | |
| 66 | status = "okay"; | |
| 67 | }; | |
| 301333bc JCPV |
68 | |
| 69 | mmc0: mmc@fffa8000 { | |
| 70 | pinctrl-0 = <&pinctrl_mmc0_clk | |
| 71 | &pinctrl_mmc0_slot1_cmd_dat0 | |
| 72 | &pinctrl_mmc0_slot1_dat1_3>; | |
| 73 | status = "okay"; | |
| 74 | ||
| 75 | slot@1 { | |
| 76 | reg = <1>; | |
| 77 | bus-width = <4>; | |
| 78 | }; | |
| 79 | }; | |
| a5618928 JCPV |
80 | |
| 81 | watchdog@fffffd40 { | |
| 82 | status = "okay"; | |
| 83 | }; | |
| ad8a15d9 JCPV |
84 | }; |
| 85 | ||
| 1004a297 | 86 | ebi: ebi@10000000 { |
| ad8a15d9 JCPV |
87 | status = "okay"; |
| 88 | ||
| 1004a297 BB |
89 | nand_controller: nand-controller { |
| 90 | status = "okay"; | |
| 91 | pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; | |
| 92 | pinctrl-names = "default"; | |
| 93 | ||
| 94 | nand@3 { | |
| 95 | reg = <0x3 0x0 0x800000>; | |
| 96 | rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; | |
| 97 | cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; | |
| 98 | nand-bus-width = <8>; | |
| 99 | nand-ecc-mode = "soft"; | |
| 100 | nand-on-flash-bbt; | |
| 101 | label = "atmel_nand"; | |
| 102 | ||
| 103 | partitions { | |
| 104 | compatible = "fixed-partitions"; | |
| 105 | #address-cells = <1>; | |
| 106 | #size-cells = <1>; | |
| 107 | ||
| 108 | barebox@0 { | |
| 109 | label = "barebox"; | |
| 110 | reg = <0x0 0x58000>; | |
| 111 | }; | |
| 112 | ||
| 113 | u_boot_env@58000 { | |
| 114 | label = "u_boot_env"; | |
| 115 | reg = <0x58000 0x8000>; | |
| 116 | }; | |
| 117 | ||
| 118 | ubi@60000 { | |
| 119 | label = "ubi"; | |
| 120 | reg = <0x60000 0x1FA0000>; | |
| 121 | }; | |
| 122 | }; | |
| 123 | }; | |
| ad8a15d9 JCPV |
124 | }; |
| 125 | }; | |
| 126 | ||
| cfdc7fa5 | 127 | usb0: ohci@500000 { |
| ad8a15d9 | 128 | num-ports = <2>; |
| 92f8629b | 129 | atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; |
| ad8a15d9 JCPV |
130 | status = "okay"; |
| 131 | }; | |
| 132 | }; | |
| 133 | ||
| 134 | leds { | |
| 135 | compatible = "gpio-leds"; | |
| 136 | ||
| 137 | power_green { | |
| 138 | label = "power_green"; | |
| 92f8629b | 139 | gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
140 | linux,default-trigger = "heartbeat"; |
| 141 | }; | |
| 142 | ||
| 143 | power_red { | |
| 144 | label = "power_red"; | |
| 92f8629b | 145 | gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
146 | }; |
| 147 | ||
| 148 | tx_green { | |
| 149 | label = "tx_green"; | |
| 92f8629b | 150 | gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
151 | }; |
| 152 | ||
| 153 | tx_red { | |
| 154 | label = "tx_red"; | |
| 92f8629b | 155 | gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
156 | }; |
| 157 | }; | |
| 158 | ||
| 159 | gpio_keys { | |
| 160 | compatible = "gpio-keys"; | |
| 161 | #address-cells = <1>; | |
| 162 | #size-cells = <0>; | |
| 163 | ||
| 164 | keyswitch_in { | |
| 165 | label = "keyswitch_in"; | |
| 92f8629b | 166 | gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 | 167 | linux,code = <28>; |
| 67ae8b9b | 168 | wakeup-source; |
| ad8a15d9 JCPV |
169 | }; |
| 170 | ||
| 171 | error_in { | |
| 172 | label = "error_in"; | |
| 92f8629b | 173 | gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 | 174 | linux,code = <29>; |
| 67ae8b9b | 175 | wakeup-source; |
| ad8a15d9 JCPV |
176 | }; |
| 177 | ||
| 178 | btn { | |
| 179 | label = "btn"; | |
| 92f8629b | 180 | gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 | 181 | linux,code = <31>; |
| 67ae8b9b | 182 | wakeup-source; |
| ad8a15d9 JCPV |
183 | }; |
| 184 | }; | |
| 185 | }; |