Commit | Line | Data |
---|---|---|
b2441318 | 1 | # SPDX-License-Identifier: GPL-2.0 |
1da177e4 LT |
2 | config ARM |
3 | bool | |
4 | default y | |
1d8f51d4 | 5 | select ARCH_CLOCKSOURCE_DATA |
ec80eb46 | 6 | select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID && !KEXEC |
c7780ab5 | 7 | select ARCH_HAS_DEBUG_VIRTUAL if MMU |
21266be9 | 8 | select ARCH_HAS_DEVMEM_IS_ALLOWED |
2b68f6ca | 9 | select ARCH_HAS_ELF_RANDOMIZE |
ee333554 | 10 | select ARCH_HAS_FORTIFY_SOURCE |
75851720 | 11 | select ARCH_HAS_KCOV |
e69244d2 | 12 | select ARCH_HAS_MEMBARRIER_SYNC_CORE |
3010a5ea | 13 | select ARCH_HAS_PTE_SPECIAL if ARM_LPAE |
ea8c64ac | 14 | select ARCH_HAS_PHYS_TO_DMA |
75851720 | 15 | select ARCH_HAS_SET_MEMORY |
ad21fc4f LA |
16 | select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL |
17 | select ARCH_HAS_STRICT_MODULE_RWX if MMU | |
3d06770e | 18 | select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST |
171b3f0d | 19 | select ARCH_HAVE_CUSTOM_GPIO_H |
957e3fac | 20 | select ARCH_HAS_GCOV_PROFILE_ALL |
d7018848 | 21 | select ARCH_MIGHT_HAVE_PC_PARPORT |
7c703e54 | 22 | select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN |
ad21fc4f LA |
23 | select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX |
24 | select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 | |
4badad35 | 25 | select ARCH_SUPPORTS_ATOMIC_RMW |
017f161a | 26 | select ARCH_USE_BUILTIN_BSWAP |
0cbad9c9 | 27 | select ARCH_USE_CMPXCHG_LOCKREF |
b1b3f49c | 28 | select ARCH_WANT_IPC_PARSE_VERSION |
ee951c63 | 29 | select BUILDTIME_EXTABLE_SORT if MMU |
171b3f0d | 30 | select CLONE_BACKWARDS |
f00790aa | 31 | select CPU_PM if SUSPEND || CPU_IDLE |
dce5c9e3 | 32 | select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS |
f0edfea8 | 33 | select DMA_REMAP if MMU |
b01aec9b BP |
34 | select EDAC_SUPPORT |
35 | select EDAC_ATOMIC_SCRUB | |
36d0fd21 | 36 | select GENERIC_ALLOCATOR |
2ef7a295 | 37 | select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY |
f00790aa | 38 | select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI |
b1b3f49c | 39 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
ea2d9a96 | 40 | select GENERIC_CPU_AUTOPROBE |
2937367b | 41 | select GENERIC_EARLY_IOREMAP |
171b3f0d | 42 | select GENERIC_IDLE_POLL_SETUP |
b1b3f49c RK |
43 | select GENERIC_IRQ_PROBE |
44 | select GENERIC_IRQ_SHOW | |
7c07005e | 45 | select GENERIC_IRQ_SHOW_LEVEL |
b1b3f49c | 46 | select GENERIC_PCI_IOMAP |
38ff87f7 | 47 | select GENERIC_SCHED_CLOCK |
b1b3f49c RK |
48 | select GENERIC_SMP_IDLE_THREAD |
49 | select GENERIC_STRNCPY_FROM_USER | |
50 | select GENERIC_STRNLEN_USER | |
a71b092a | 51 | select HANDLE_DOMAIN_IRQ |
b1b3f49c | 52 | select HARDIRQS_SW_RESEND |
f00790aa | 53 | select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT |
0b7857db | 54 | select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 |
437682ee AB |
55 | select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU |
56 | select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU | |
e0c25d95 | 57 | select HAVE_ARCH_MMAP_RND_BITS if MMU |
f00790aa | 58 | select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT |
08626a60 | 59 | select HAVE_ARCH_THREAD_STRUCT_WHITELIST |
0693bf68 | 60 | select HAVE_ARCH_TRACEHOOK |
b329f95d | 61 | select HAVE_ARM_SMCCC if CPU_V7 |
39c13c20 | 62 | select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32 |
171b3f0d | 63 | select HAVE_CONTEXT_TRACKING |
b1b3f49c RK |
64 | select HAVE_C_RECORDMCOUNT |
65 | select HAVE_DEBUG_KMEMLEAK | |
b1b3f49c | 66 | select HAVE_DMA_CONTIGUOUS if MMU |
f00790aa | 67 | select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU |
620176f3 | 68 | select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE |
dce5c9e3 | 69 | select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU |
5f56a5df | 70 | select HAVE_EXIT_THREAD |
f00790aa RK |
71 | select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL |
72 | select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL | |
73 | select HAVE_FUNCTION_TRACER if !XIP_KERNEL | |
6b90bd4b | 74 | select HAVE_GCC_PLUGINS |
1fe53268 | 75 | select HAVE_GENERIC_DMA_COHERENT |
f00790aa | 76 | select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7) |
b1b3f49c | 77 | select HAVE_IDE if PCI || ISA || PCMCIA |
87c46b6c | 78 | select HAVE_IRQ_TIME_ACCOUNTING |
e7db7b42 | 79 | select HAVE_KERNEL_GZIP |
f9b493ac | 80 | select HAVE_KERNEL_LZ4 |
6e8699f7 | 81 | select HAVE_KERNEL_LZMA |
b1b3f49c | 82 | select HAVE_KERNEL_LZO |
a7f464f3 | 83 | select HAVE_KERNEL_XZ |
cb1293e2 | 84 | select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M |
f00790aa | 85 | select HAVE_KRETPROBES if HAVE_KPROBES |
7d485f64 | 86 | select HAVE_MOD_ARCH_SPECIFIC |
42a0bb3f | 87 | select HAVE_NMI |
f00790aa | 88 | select HAVE_OPROFILE if HAVE_PERF_EVENTS |
0dc016db | 89 | select HAVE_OPTPROBES if !THUMB2_KERNEL |
7ada189f | 90 | select HAVE_PERF_EVENTS |
49863894 WD |
91 | select HAVE_PERF_REGS |
92 | select HAVE_PERF_USER_STACK_DUMP | |
f00790aa | 93 | select HAVE_RCU_TABLE_FREE if SMP && ARM_LPAE |
e513f8bf | 94 | select HAVE_REGS_AND_STACK_ACCESS_API |
9800b9dc | 95 | select HAVE_RSEQ |
d148eac0 | 96 | select HAVE_STACKPROTECTOR |
b1b3f49c | 97 | select HAVE_SYSCALL_TRACEPOINTS |
af1839eb | 98 | select HAVE_UID16 |
31c1fc81 | 99 | select HAVE_VIRT_CPU_ACCOUNTING_GEN |
da0ec6f7 | 100 | select IRQ_FORCED_THREADING |
171b3f0d | 101 | select MODULES_USE_ELF_REL |
f616ab59 | 102 | select NEED_DMA_MAP_STATE |
aa7d5f18 AB |
103 | select OF_EARLY_FLATTREE if OF |
104 | select OF_RESERVED_MEM if OF | |
171b3f0d RK |
105 | select OLD_SIGACTION |
106 | select OLD_SIGSUSPEND3 | |
20f1b79d | 107 | select PCI_SYSCALL if PCI |
b1b3f49c | 108 | select PERF_USE_VMALLOC |
b26d07a0 | 109 | select REFCOUNT_FULL |
b1b3f49c RK |
110 | select RTC_LIB |
111 | select SYS_SUPPORTS_APM_EMULATION | |
171b3f0d RK |
112 | # Above selects are sorted alphabetically; please add new ones |
113 | # according to that. Thanks. | |
1da177e4 LT |
114 | help |
115 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 116 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 117 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 118 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
119 | Europe. There is an ARM Linux project with a web page at |
120 | <http://www.arm.linux.org.uk/>. | |
121 | ||
74facffe RK |
122 | config ARM_HAS_SG_CHAIN |
123 | bool | |
124 | ||
4ce63fcd | 125 | config ARM_DMA_USE_IOMMU |
4ce63fcd | 126 | bool |
b1b3f49c RK |
127 | select ARM_HAS_SG_CHAIN |
128 | select NEED_SG_DMA_LENGTH | |
4ce63fcd | 129 | |
60460abf SWK |
130 | if ARM_DMA_USE_IOMMU |
131 | ||
132 | config ARM_DMA_IOMMU_ALIGNMENT | |
133 | int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" | |
134 | range 4 9 | |
135 | default 8 | |
136 | help | |
137 | DMA mapping framework by default aligns all buffers to the smallest | |
138 | PAGE_SIZE order which is greater than or equal to the requested buffer | |
139 | size. This works well for buffers up to a few hundreds kilobytes, but | |
140 | for larger buffers it just a waste of address space. Drivers which has | |
141 | relatively small addressing window (like 64Mib) might run out of | |
142 | virtual space with just a few allocations. | |
143 | ||
144 | With this parameter you can specify the maximum PAGE_SIZE order for | |
145 | DMA IOMMU buffers. Larger buffers will be aligned only to this | |
146 | specified order. The order is expressed as a power of two multiplied | |
147 | by the PAGE_SIZE. | |
148 | ||
149 | endif | |
150 | ||
75e7153a RB |
151 | config SYS_SUPPORTS_APM_EMULATION |
152 | bool | |
153 | ||
bc581770 LW |
154 | config HAVE_TCM |
155 | bool | |
156 | select GENERIC_ALLOCATOR | |
157 | ||
e119bfff RK |
158 | config HAVE_PROC_CPU |
159 | bool | |
160 | ||
ce816fa8 | 161 | config NO_IOPORT_MAP |
5ea81769 | 162 | bool |
5ea81769 | 163 | |
1da177e4 LT |
164 | config SBUS |
165 | bool | |
166 | ||
f16fb1ec RK |
167 | config STACKTRACE_SUPPORT |
168 | bool | |
169 | default y | |
170 | ||
171 | config LOCKDEP_SUPPORT | |
172 | bool | |
173 | default y | |
174 | ||
7ad1bcb2 RK |
175 | config TRACE_IRQFLAGS_SUPPORT |
176 | bool | |
cb1293e2 | 177 | default !CPU_V7M |
7ad1bcb2 | 178 | |
1da177e4 LT |
179 | config RWSEM_XCHGADD_ALGORITHM |
180 | bool | |
8a87411b | 181 | default y |
1da177e4 | 182 | |
f0d1b0b3 DH |
183 | config ARCH_HAS_ILOG2_U32 |
184 | bool | |
f0d1b0b3 DH |
185 | |
186 | config ARCH_HAS_ILOG2_U64 | |
187 | bool | |
f0d1b0b3 | 188 | |
4a1b5733 EV |
189 | config ARCH_HAS_BANDGAP |
190 | bool | |
191 | ||
a5f4c561 SA |
192 | config FIX_EARLYCON_MEM |
193 | def_bool y if MMU | |
194 | ||
b89c3b16 AM |
195 | config GENERIC_HWEIGHT |
196 | bool | |
197 | default y | |
198 | ||
1da177e4 LT |
199 | config GENERIC_CALIBRATE_DELAY |
200 | bool | |
201 | default y | |
202 | ||
a08b6b79 Z |
203 | config ARCH_MAY_HAVE_PC_FDC |
204 | bool | |
205 | ||
5ac6da66 CL |
206 | config ZONE_DMA |
207 | bool | |
5ac6da66 | 208 | |
c7edc9e3 DL |
209 | config ARCH_SUPPORTS_UPROBES |
210 | def_bool y | |
211 | ||
58af4a24 RH |
212 | config ARCH_HAS_DMA_SET_COHERENT_MASK |
213 | bool | |
214 | ||
1da177e4 LT |
215 | config GENERIC_ISA_DMA |
216 | bool | |
217 | ||
1da177e4 LT |
218 | config FIQ |
219 | bool | |
220 | ||
13a5045d RH |
221 | config NEED_RET_TO_USER |
222 | bool | |
223 | ||
034d2f5a AV |
224 | config ARCH_MTD_XIP |
225 | bool | |
226 | ||
dc21af99 | 227 | config ARM_PATCH_PHYS_VIRT |
c1becedc RK |
228 | bool "Patch physical to virtual translations at runtime" if EMBEDDED |
229 | default y | |
b511d75d | 230 | depends on !XIP_KERNEL && MMU |
dc21af99 | 231 | help |
111e9a5c RK |
232 | Patch phys-to-virt and virt-to-phys translation functions at |
233 | boot and module load time according to the position of the | |
234 | kernel in system memory. | |
dc21af99 | 235 | |
111e9a5c | 236 | This can only be used with non-XIP MMU kernels where the base |
daece596 | 237 | of physical memory is at a 16MB boundary. |
dc21af99 | 238 | |
c1becedc RK |
239 | Only disable this option if you know that you do not require |
240 | this feature (eg, building a kernel for a single machine) and | |
241 | you need to shrink the kernel to the minimal size. | |
dc21af99 | 242 | |
c334bc15 RH |
243 | config NEED_MACH_IO_H |
244 | bool | |
245 | help | |
246 | Select this when mach/io.h is required to provide special | |
247 | definitions for this platform. The need for mach/io.h should | |
248 | be avoided when possible. | |
249 | ||
0cdc8b92 | 250 | config NEED_MACH_MEMORY_H |
1b9f95f8 NP |
251 | bool |
252 | help | |
0cdc8b92 NP |
253 | Select this when mach/memory.h is required to provide special |
254 | definitions for this platform. The need for mach/memory.h should | |
255 | be avoided when possible. | |
dc21af99 | 256 | |
1b9f95f8 | 257 | config PHYS_OFFSET |
974c0724 | 258 | hex "Physical address of main memory" if MMU |
c6f54a9b | 259 | depends on !ARM_PATCH_PHYS_VIRT |
974c0724 | 260 | default DRAM_BASE if !MMU |
c6f54a9b | 261 | default 0x00000000 if ARCH_EBSA110 || \ |
c6f54a9b UKK |
262 | ARCH_FOOTBRIDGE || \ |
263 | ARCH_INTEGRATOR || \ | |
264 | ARCH_IOP13XX || \ | |
265 | ARCH_KS8695 || \ | |
8f2c0062 | 266 | ARCH_REALVIEW |
c6f54a9b UKK |
267 | default 0x10000000 if ARCH_OMAP1 || ARCH_RPC |
268 | default 0x20000000 if ARCH_S5PV210 | |
b8824c9a | 269 | default 0xc0000000 if ARCH_SA1100 |
111e9a5c | 270 | help |
1b9f95f8 NP |
271 | Please provide the physical address corresponding to the |
272 | location of main memory in your system. | |
cada3c08 | 273 | |
87e040b6 SG |
274 | config GENERIC_BUG |
275 | def_bool y | |
276 | depends on BUG | |
277 | ||
1bcad26e KS |
278 | config PGTABLE_LEVELS |
279 | int | |
280 | default 3 if ARM_LPAE | |
281 | default 2 | |
282 | ||
1da177e4 LT |
283 | menu "System Type" |
284 | ||
3c427975 HC |
285 | config MMU |
286 | bool "MMU-based Paged Memory Management Support" | |
287 | default y | |
288 | help | |
289 | Select if you want MMU-based virtualised addressing space | |
290 | support by paged memory management. If unsure, say 'Y'. | |
291 | ||
e0c25d95 DC |
292 | config ARCH_MMAP_RND_BITS_MIN |
293 | default 8 | |
294 | ||
295 | config ARCH_MMAP_RND_BITS_MAX | |
296 | default 14 if PAGE_OFFSET=0x40000000 | |
297 | default 15 if PAGE_OFFSET=0x80000000 | |
298 | default 16 | |
299 | ||
ccf50e23 RK |
300 | # |
301 | # The "ARM system type" choice list is ordered alphabetically by option | |
302 | # text. Please add new entries in the option alphabetic order. | |
303 | # | |
1da177e4 LT |
304 | choice |
305 | prompt "ARM system type" | |
70722803 | 306 | default ARM_SINGLE_ARMV7M if !MMU |
1420b22b | 307 | default ARCH_MULTIPLATFORM if MMU |
1da177e4 | 308 | |
387798b3 RH |
309 | config ARCH_MULTIPLATFORM |
310 | bool "Allow multiple platforms to be selected" | |
b1b3f49c | 311 | depends on MMU |
42dc836d | 312 | select ARM_HAS_SG_CHAIN |
387798b3 RH |
313 | select ARM_PATCH_PHYS_VIRT |
314 | select AUTO_ZRELADDR | |
bb0eb050 | 315 | select TIMER_OF |
66314223 | 316 | select COMMON_CLK |
ddb902cc | 317 | select GENERIC_CLOCKEVENTS |
4c301f9b | 318 | select GENERIC_IRQ_MULTI_HANDLER |
eb01d42a | 319 | select HAVE_PCI |
2eac9c2d | 320 | select PCI_DOMAINS_GENERIC if PCI |
66314223 DN |
321 | select SPARSE_IRQ |
322 | select USE_OF | |
66314223 | 323 | |
9c77bc43 SA |
324 | config ARM_SINGLE_ARMV7M |
325 | bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" | |
326 | depends on !MMU | |
9c77bc43 | 327 | select ARM_NVIC |
499f1640 | 328 | select AUTO_ZRELADDR |
bb0eb050 | 329 | select TIMER_OF |
9c77bc43 SA |
330 | select COMMON_CLK |
331 | select CPU_V7M | |
332 | select GENERIC_CLOCKEVENTS | |
333 | select NO_IOPORT_MAP | |
334 | select SPARSE_IRQ | |
335 | select USE_OF | |
336 | ||
1da177e4 LT |
337 | config ARCH_EBSA110 |
338 | bool "EBSA-110" | |
b1b3f49c | 339 | select ARCH_USES_GETTIMEOFFSET |
c750815e | 340 | select CPU_SA110 |
f7e68bbf | 341 | select ISA |
c334bc15 | 342 | select NEED_MACH_IO_H |
0cdc8b92 | 343 | select NEED_MACH_MEMORY_H |
ce816fa8 | 344 | select NO_IOPORT_MAP |
1da177e4 LT |
345 | help |
346 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 347 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
348 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
349 | parallel port. | |
350 | ||
e7736d47 LB |
351 | config ARCH_EP93XX |
352 | bool "EP93xx-based" | |
80320927 | 353 | select ARCH_SPARSEMEM_ENABLE |
e7736d47 | 354 | select ARM_AMBA |
cd5bad41 | 355 | imply ARM_PATCH_PHYS_VIRT |
e7736d47 | 356 | select ARM_VIC |
b8824c9a | 357 | select AUTO_ZRELADDR |
6d803ba7 | 358 | select CLKDEV_LOOKUP |
000bc178 | 359 | select CLKSRC_MMIO |
b1b3f49c | 360 | select CPU_ARM920T |
000bc178 | 361 | select GENERIC_CLOCKEVENTS |
5c34a4e8 | 362 | select GPIOLIB |
e7736d47 LB |
363 | help |
364 | This enables support for the Cirrus EP93xx series of CPUs. | |
365 | ||
1da177e4 LT |
366 | config ARCH_FOOTBRIDGE |
367 | bool "FootBridge" | |
c750815e | 368 | select CPU_SA110 |
1da177e4 | 369 | select FOOTBRIDGE |
4e8d7637 | 370 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 371 | select HAVE_IDE |
8ef6e620 | 372 | select NEED_MACH_IO_H if !MMU |
0cdc8b92 | 373 | select NEED_MACH_MEMORY_H |
f999b8bd MM |
374 | help |
375 | Support for systems based on the DC21285 companion chip | |
376 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 377 | |
4af6fee1 DS |
378 | config ARCH_NETX |
379 | bool "Hilscher NetX based" | |
b1b3f49c | 380 | select ARM_VIC |
234b6ced | 381 | select CLKSRC_MMIO |
c750815e | 382 | select CPU_ARM926T |
2fcfe6b8 | 383 | select GENERIC_CLOCKEVENTS |
f999b8bd | 384 | help |
4af6fee1 DS |
385 | This enables support for systems based on the Hilscher NetX Soc |
386 | ||
3b938be6 RK |
387 | config ARCH_IOP13XX |
388 | bool "IOP13xx-based" | |
389 | depends on MMU | |
b1b3f49c | 390 | select CPU_XSC3 |
0cdc8b92 | 391 | select NEED_MACH_MEMORY_H |
13a5045d | 392 | select NEED_RET_TO_USER |
eb01d42a | 393 | select FORCE_PCI |
b1b3f49c RK |
394 | select PLAT_IOP |
395 | select VMSPLIT_1G | |
37ebbcff | 396 | select SPARSE_IRQ |
3b938be6 RK |
397 | help |
398 | Support for Intel's IOP13XX (XScale) family of processors. | |
399 | ||
3f7e5815 LB |
400 | config ARCH_IOP32X |
401 | bool "IOP32x-based" | |
a4f7e763 | 402 | depends on MMU |
c750815e | 403 | select CPU_XSCALE |
e9004f50 | 404 | select GPIO_IOP |
5c34a4e8 | 405 | select GPIOLIB |
13a5045d | 406 | select NEED_RET_TO_USER |
eb01d42a | 407 | select FORCE_PCI |
b1b3f49c | 408 | select PLAT_IOP |
f999b8bd | 409 | help |
3f7e5815 LB |
410 | Support for Intel's 80219 and IOP32X (XScale) family of |
411 | processors. | |
412 | ||
413 | config ARCH_IOP33X | |
414 | bool "IOP33x-based" | |
415 | depends on MMU | |
c750815e | 416 | select CPU_XSCALE |
e9004f50 | 417 | select GPIO_IOP |
5c34a4e8 | 418 | select GPIOLIB |
13a5045d | 419 | select NEED_RET_TO_USER |
eb01d42a | 420 | select FORCE_PCI |
b1b3f49c | 421 | select PLAT_IOP |
3f7e5815 LB |
422 | help |
423 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 424 | |
3b938be6 RK |
425 | config ARCH_IXP4XX |
426 | bool "IXP4xx-based" | |
a4f7e763 | 427 | depends on MMU |
58af4a24 | 428 | select ARCH_HAS_DMA_SET_COHERENT_MASK |
51aaf81f | 429 | select ARCH_SUPPORTS_BIG_ENDIAN |
234b6ced | 430 | select CLKSRC_MMIO |
c750815e | 431 | select CPU_XSCALE |
b1b3f49c | 432 | select DMABOUNCE if PCI |
3b938be6 | 433 | select GENERIC_CLOCKEVENTS |
5c34a4e8 | 434 | select GPIOLIB |
eb01d42a | 435 | select HAVE_PCI |
c334bc15 | 436 | select NEED_MACH_IO_H |
9296d94d | 437 | select USB_EHCI_BIG_ENDIAN_DESC |
171b3f0d | 438 | select USB_EHCI_BIG_ENDIAN_MMIO |
c4713074 | 439 | help |
3b938be6 | 440 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 441 | |
edabd38e SB |
442 | config ARCH_DOVE |
443 | bool "Marvell Dove" | |
756b2531 | 444 | select CPU_PJ4 |
edabd38e | 445 | select GENERIC_CLOCKEVENTS |
4c301f9b | 446 | select GENERIC_IRQ_MULTI_HANDLER |
5c34a4e8 | 447 | select GPIOLIB |
eb01d42a | 448 | select HAVE_PCI |
171b3f0d | 449 | select MVEBU_MBUS |
9139acd1 SH |
450 | select PINCTRL |
451 | select PINCTRL_DOVE | |
abcda1dc | 452 | select PLAT_ORION_LEGACY |
0bd86961 | 453 | select SPARSE_IRQ |
c5d431e8 | 454 | select PM_GENERIC_DOMAINS if PM |
788c9700 | 455 | help |
edabd38e | 456 | Support for the Marvell Dove SoC 88AP510 |
788c9700 RK |
457 | |
458 | config ARCH_KS8695 | |
459 | bool "Micrel/Kendin KS8695" | |
c7e783d6 | 460 | select CLKSRC_MMIO |
b1b3f49c | 461 | select CPU_ARM922T |
c7e783d6 | 462 | select GENERIC_CLOCKEVENTS |
5c34a4e8 | 463 | select GPIOLIB |
b1b3f49c | 464 | select NEED_MACH_MEMORY_H |
788c9700 RK |
465 | help |
466 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
467 | System-on-Chip devices. | |
468 | ||
788c9700 RK |
469 | config ARCH_W90X900 |
470 | bool "Nuvoton W90X900 CPU" | |
6d803ba7 | 471 | select CLKDEV_LOOKUP |
6fa5d5f7 | 472 | select CLKSRC_MMIO |
b1b3f49c | 473 | select CPU_ARM926T |
58b5369e | 474 | select GENERIC_CLOCKEVENTS |
5c34a4e8 | 475 | select GPIOLIB |
788c9700 | 476 | help |
a8bc4ead | 477 | Support for Nuvoton (Winbond logic dept.) ARM9 processor, |
478 | At present, the w90x900 has been renamed nuc900, regarding | |
479 | the ARM series product line, you can login the following | |
480 | link address to know more. | |
481 | ||
482 | <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ | |
483 | ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> | |
788c9700 | 484 | |
93e22567 RK |
485 | config ARCH_LPC32XX |
486 | bool "NXP LPC32XX" | |
93e22567 RK |
487 | select ARM_AMBA |
488 | select CLKDEV_LOOKUP | |
c227f127 VZ |
489 | select CLKSRC_LPC32XX |
490 | select COMMON_CLK | |
93e22567 RK |
491 | select CPU_ARM926T |
492 | select GENERIC_CLOCKEVENTS | |
4c301f9b | 493 | select GENERIC_IRQ_MULTI_HANDLER |
5c34a4e8 | 494 | select GPIOLIB |
8cb17b5e | 495 | select SPARSE_IRQ |
93e22567 RK |
496 | select USE_OF |
497 | help | |
498 | Support for the NXP LPC32XX family of processors | |
499 | ||
1da177e4 | 500 | config ARCH_PXA |
2c8086a5 | 501 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 502 | depends on MMU |
b1b3f49c | 503 | select ARCH_MTD_XIP |
b1b3f49c RK |
504 | select ARM_CPU_SUSPEND if PM |
505 | select AUTO_ZRELADDR | |
a1c0a6ad | 506 | select COMMON_CLK |
6d803ba7 | 507 | select CLKDEV_LOOKUP |
389d9b58 | 508 | select CLKSRC_PXA |
234b6ced | 509 | select CLKSRC_MMIO |
bb0eb050 | 510 | select TIMER_OF |
2f202861 | 511 | select CPU_XSCALE if !CPU_XSC3 |
981d0f39 | 512 | select GENERIC_CLOCKEVENTS |
4c301f9b | 513 | select GENERIC_IRQ_MULTI_HANDLER |
157d2644 | 514 | select GPIO_PXA |
5c34a4e8 | 515 | select GPIOLIB |
d0ee9f40 | 516 | select HAVE_IDE |
d6cf30ca | 517 | select IRQ_DOMAIN |
b1b3f49c RK |
518 | select PLAT_PXA |
519 | select SPARSE_IRQ | |
f999b8bd | 520 | help |
2c8086a5 | 521 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 LT |
522 | |
523 | config ARCH_RPC | |
524 | bool "RiscPC" | |
868e87cc | 525 | depends on MMU |
1da177e4 | 526 | select ARCH_ACORN |
a08b6b79 | 527 | select ARCH_MAY_HAVE_PC_FDC |
07f841b7 | 528 | select ARCH_SPARSEMEM_ENABLE |
5cfc8ee0 | 529 | select ARCH_USES_GETTIMEOFFSET |
fa04e209 | 530 | select CPU_SA110 |
b1b3f49c | 531 | select FIQ |
d0ee9f40 | 532 | select HAVE_IDE |
b1b3f49c RK |
533 | select HAVE_PATA_PLATFORM |
534 | select ISA_DMA_API | |
c334bc15 | 535 | select NEED_MACH_IO_H |
0cdc8b92 | 536 | select NEED_MACH_MEMORY_H |
ce816fa8 | 537 | select NO_IOPORT_MAP |
1da177e4 LT |
538 | help |
539 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
540 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
541 | ||
542 | config ARCH_SA1100 | |
543 | bool "SA1100-based" | |
b1b3f49c | 544 | select ARCH_MTD_XIP |
b1b3f49c RK |
545 | select ARCH_SPARSEMEM_ENABLE |
546 | select CLKDEV_LOOKUP | |
547 | select CLKSRC_MMIO | |
389d9b58 | 548 | select CLKSRC_PXA |
bb0eb050 | 549 | select TIMER_OF if OF |
1937f5b9 | 550 | select CPU_FREQ |
b1b3f49c | 551 | select CPU_SA1100 |
3e238be2 | 552 | select GENERIC_CLOCKEVENTS |
4c301f9b | 553 | select GENERIC_IRQ_MULTI_HANDLER |
5c34a4e8 | 554 | select GPIOLIB |
d0ee9f40 | 555 | select HAVE_IDE |
1eca42b4 | 556 | select IRQ_DOMAIN |
b1b3f49c | 557 | select ISA |
0cdc8b92 | 558 | select NEED_MACH_MEMORY_H |
375dec92 | 559 | select SPARSE_IRQ |
f999b8bd MM |
560 | help |
561 | Support for StrongARM 11x0 based boards. | |
1da177e4 | 562 | |
b130d5c2 KK |
563 | config ARCH_S3C24XX |
564 | bool "Samsung S3C24XX SoCs" | |
335cce74 | 565 | select ATAGS |
b1b3f49c | 566 | select CLKDEV_LOOKUP |
4280506a | 567 | select CLKSRC_SAMSUNG_PWM |
7f78b6eb | 568 | select GENERIC_CLOCKEVENTS |
880cf071 | 569 | select GPIO_SAMSUNG |
5c34a4e8 | 570 | select GPIOLIB |
4c301f9b | 571 | select GENERIC_IRQ_MULTI_HANDLER |
20676c15 | 572 | select HAVE_S3C2410_I2C if I2C |
b130d5c2 | 573 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
b1b3f49c | 574 | select HAVE_S3C_RTC if RTC_CLASS |
c334bc15 | 575 | select NEED_MACH_IO_H |
cd8dc7ae | 576 | select SAMSUNG_ATAGS |
ea04d6b4 | 577 | select USE_OF |
1da177e4 | 578 | help |
b130d5c2 KK |
579 | Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
580 | and S3C2450 SoCs based systems, such as the Simtec Electronics BAST | |
581 | (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the | |
582 | Samsung SMDK2410 development board (and derivatives). | |
63b1f51b | 583 | |
7c6337e2 KH |
584 | config ARCH_DAVINCI |
585 | bool "TI DaVinci" | |
b1b3f49c | 586 | select ARCH_HAS_HOLES_MEMORYMODEL |
27823278 | 587 | select COMMON_CLK |
ce32c5c5 | 588 | select CPU_ARM926T |
20e9969b | 589 | select GENERIC_ALLOCATOR |
b1b3f49c | 590 | select GENERIC_CLOCKEVENTS |
dc7ad3b3 | 591 | select GENERIC_IRQ_CHIP |
5c34a4e8 | 592 | select GPIOLIB |
b1b3f49c | 593 | select HAVE_IDE |
27823278 DL |
594 | select PM_GENERIC_DOMAINS if PM |
595 | select PM_GENERIC_DOMAINS_OF if PM && OF | |
596 | select RESET_CONTROLLER | |
689e331f | 597 | select USE_OF |
b1b3f49c | 598 | select ZONE_DMA |
7c6337e2 KH |
599 | help |
600 | Support for TI's DaVinci platform. | |
601 | ||
a0694861 TL |
602 | config ARCH_OMAP1 |
603 | bool "TI OMAP1" | |
00a36698 | 604 | depends on MMU |
9af915da | 605 | select ARCH_HAS_HOLES_MEMORYMODEL |
a0694861 | 606 | select ARCH_OMAP |
b1b3f49c | 607 | select CLKDEV_LOOKUP |
d6e15d78 | 608 | select CLKSRC_MMIO |
b1b3f49c | 609 | select GENERIC_CLOCKEVENTS |
a0694861 | 610 | select GENERIC_IRQ_CHIP |
4c301f9b | 611 | select GENERIC_IRQ_MULTI_HANDLER |
5c34a4e8 | 612 | select GPIOLIB |
a0694861 TL |
613 | select HAVE_IDE |
614 | select IRQ_DOMAIN | |
615 | select NEED_MACH_IO_H if PCCARD | |
616 | select NEED_MACH_MEMORY_H | |
685e2d08 | 617 | select SPARSE_IRQ |
21f47fbc | 618 | help |
a0694861 | 619 | Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) |
02c981c0 | 620 | |
1da177e4 LT |
621 | endchoice |
622 | ||
387798b3 RH |
623 | menu "Multiple platform selection" |
624 | depends on ARCH_MULTIPLATFORM | |
625 | ||
626 | comment "CPU Core family selection" | |
627 | ||
f8afae40 AB |
628 | config ARCH_MULTI_V4 |
629 | bool "ARMv4 based platforms (FA526)" | |
630 | depends on !ARCH_MULTI_V6_V7 | |
631 | select ARCH_MULTI_V4_V5 | |
632 | select CPU_FA526 | |
633 | ||
387798b3 RH |
634 | config ARCH_MULTI_V4T |
635 | bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" | |
387798b3 | 636 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 637 | select ARCH_MULTI_V4_V5 |
24e860fb AB |
638 | select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ |
639 | CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ | |
640 | CPU_ARM925T || CPU_ARM940T) | |
387798b3 RH |
641 | |
642 | config ARCH_MULTI_V5 | |
643 | bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" | |
387798b3 | 644 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 645 | select ARCH_MULTI_V4_V5 |
12567bbd | 646 | select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ |
24e860fb AB |
647 | CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ |
648 | CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) | |
387798b3 RH |
649 | |
650 | config ARCH_MULTI_V4_V5 | |
651 | bool | |
652 | ||
653 | config ARCH_MULTI_V6 | |
8dda05cc | 654 | bool "ARMv6 based platforms (ARM11)" |
387798b3 | 655 | select ARCH_MULTI_V6_V7 |
42f4754a | 656 | select CPU_V6K |
387798b3 RH |
657 | |
658 | config ARCH_MULTI_V7 | |
8dda05cc | 659 | bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" |
387798b3 RH |
660 | default y |
661 | select ARCH_MULTI_V6_V7 | |
b1b3f49c | 662 | select CPU_V7 |
90bc8ac7 | 663 | select HAVE_SMP |
387798b3 RH |
664 | |
665 | config ARCH_MULTI_V6_V7 | |
666 | bool | |
9352b05b | 667 | select MIGHT_HAVE_CACHE_L2X0 |
387798b3 RH |
668 | |
669 | config ARCH_MULTI_CPU_AUTO | |
670 | def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) | |
671 | select ARCH_MULTI_V5 | |
672 | ||
673 | endmenu | |
674 | ||
05e2a3de | 675 | config ARCH_VIRT |
e3246542 MY |
676 | bool "Dummy Virtual Machine" |
677 | depends on ARCH_MULTI_V7 | |
4b8b5f25 | 678 | select ARM_AMBA |
05e2a3de | 679 | select ARM_GIC |
3ee80364 | 680 | select ARM_GIC_V2M if PCI |
0b28f1db | 681 | select ARM_GIC_V3 |
bb29cecb | 682 | select ARM_GIC_V3_ITS if PCI |
05e2a3de | 683 | select ARM_PSCI |
4b8b5f25 | 684 | select HAVE_ARM_ARCH_TIMER |
8e2649d0 | 685 | select ARCH_SUPPORTS_BIG_ENDIAN |
05e2a3de | 686 | |
ccf50e23 RK |
687 | # |
688 | # This is sorted alphabetically by mach-* pathname. However, plat-* | |
689 | # Kconfigs may be included either alphabetically (according to the | |
690 | # plat- suffix) or along side the corresponding mach-* source. | |
691 | # | |
6bb8536c AF |
692 | source "arch/arm/mach-actions/Kconfig" |
693 | ||
445d9b30 TZ |
694 | source "arch/arm/mach-alpine/Kconfig" |
695 | ||
590b460c LP |
696 | source "arch/arm/mach-artpec/Kconfig" |
697 | ||
d9bfc86d OR |
698 | source "arch/arm/mach-asm9260/Kconfig" |
699 | ||
a66c51f9 AB |
700 | source "arch/arm/mach-aspeed/Kconfig" |
701 | ||
95b8f20f RK |
702 | source "arch/arm/mach-at91/Kconfig" |
703 | ||
1d22924e AB |
704 | source "arch/arm/mach-axxia/Kconfig" |
705 | ||
8ac49e04 CD |
706 | source "arch/arm/mach-bcm/Kconfig" |
707 | ||
1c37fa10 SH |
708 | source "arch/arm/mach-berlin/Kconfig" |
709 | ||
1da177e4 LT |
710 | source "arch/arm/mach-clps711x/Kconfig" |
711 | ||
d94f944e AV |
712 | source "arch/arm/mach-cns3xxx/Kconfig" |
713 | ||
95b8f20f RK |
714 | source "arch/arm/mach-davinci/Kconfig" |
715 | ||
df8d742e BS |
716 | source "arch/arm/mach-digicolor/Kconfig" |
717 | ||
95b8f20f RK |
718 | source "arch/arm/mach-dove/Kconfig" |
719 | ||
e7736d47 LB |
720 | source "arch/arm/mach-ep93xx/Kconfig" |
721 | ||
a66c51f9 AB |
722 | source "arch/arm/mach-exynos/Kconfig" |
723 | source "arch/arm/plat-samsung/Kconfig" | |
724 | ||
1da177e4 LT |
725 | source "arch/arm/mach-footbridge/Kconfig" |
726 | ||
59d3a193 PZ |
727 | source "arch/arm/mach-gemini/Kconfig" |
728 | ||
387798b3 RH |
729 | source "arch/arm/mach-highbank/Kconfig" |
730 | ||
389ee0c2 HZ |
731 | source "arch/arm/mach-hisi/Kconfig" |
732 | ||
a66c51f9 AB |
733 | source "arch/arm/mach-imx/Kconfig" |
734 | ||
1da177e4 LT |
735 | source "arch/arm/mach-integrator/Kconfig" |
736 | ||
a66c51f9 AB |
737 | source "arch/arm/mach-iop13xx/Kconfig" |
738 | ||
3f7e5815 LB |
739 | source "arch/arm/mach-iop32x/Kconfig" |
740 | ||
741 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 LT |
742 | |
743 | source "arch/arm/mach-ixp4xx/Kconfig" | |
744 | ||
828989ad SS |
745 | source "arch/arm/mach-keystone/Kconfig" |
746 | ||
95b8f20f RK |
747 | source "arch/arm/mach-ks8695/Kconfig" |
748 | ||
a66c51f9 AB |
749 | source "arch/arm/mach-mediatek/Kconfig" |
750 | ||
3b8f5030 CC |
751 | source "arch/arm/mach-meson/Kconfig" |
752 | ||
a66c51f9 | 753 | source "arch/arm/mach-mmp/Kconfig" |
17723fd3 | 754 | |
a66c51f9 | 755 | source "arch/arm/mach-moxart/Kconfig" |
8c2ed9bc | 756 | |
794d15b2 SS |
757 | source "arch/arm/mach-mv78xx0/Kconfig" |
758 | ||
a66c51f9 | 759 | source "arch/arm/mach-mvebu/Kconfig" |
f682a218 | 760 | |
1d3f33d5 SG |
761 | source "arch/arm/mach-mxs/Kconfig" |
762 | ||
95b8f20f | 763 | source "arch/arm/mach-netx/Kconfig" |
49cbe786 | 764 | |
95b8f20f | 765 | source "arch/arm/mach-nomadik/Kconfig" |
95b8f20f | 766 | |
7bffa14c BH |
767 | source "arch/arm/mach-npcm/Kconfig" |
768 | ||
9851ca57 DT |
769 | source "arch/arm/mach-nspire/Kconfig" |
770 | ||
d48af15e TL |
771 | source "arch/arm/plat-omap/Kconfig" |
772 | ||
773 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 774 | |
1dbae815 TL |
775 | source "arch/arm/mach-omap2/Kconfig" |
776 | ||
9dd0b194 | 777 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 778 | |
a66c51f9 AB |
779 | source "arch/arm/mach-oxnas/Kconfig" |
780 | ||
387798b3 RH |
781 | source "arch/arm/mach-picoxcell/Kconfig" |
782 | ||
a66c51f9 AB |
783 | source "arch/arm/mach-prima2/Kconfig" |
784 | ||
95b8f20f RK |
785 | source "arch/arm/mach-pxa/Kconfig" |
786 | source "arch/arm/plat-pxa/Kconfig" | |
585cf175 | 787 | |
8fc1b0f8 KG |
788 | source "arch/arm/mach-qcom/Kconfig" |
789 | ||
78e3dbc1 AF |
790 | source "arch/arm/mach-rda/Kconfig" |
791 | ||
95b8f20f RK |
792 | source "arch/arm/mach-realview/Kconfig" |
793 | ||
d63dc051 HS |
794 | source "arch/arm/mach-rockchip/Kconfig" |
795 | ||
a66c51f9 AB |
796 | source "arch/arm/mach-s3c24xx/Kconfig" |
797 | ||
798 | source "arch/arm/mach-s3c64xx/Kconfig" | |
799 | ||
800 | source "arch/arm/mach-s5pv210/Kconfig" | |
801 | ||
95b8f20f | 802 | source "arch/arm/mach-sa1100/Kconfig" |
edabd38e | 803 | |
a66c51f9 AB |
804 | source "arch/arm/mach-shmobile/Kconfig" |
805 | ||
387798b3 RH |
806 | source "arch/arm/mach-socfpga/Kconfig" |
807 | ||
a7ed099f | 808 | source "arch/arm/mach-spear/Kconfig" |
a21765a7 | 809 | |
65ebcc11 SK |
810 | source "arch/arm/mach-sti/Kconfig" |
811 | ||
bcb84fb4 AT |
812 | source "arch/arm/mach-stm32/Kconfig" |
813 | ||
3b52634f MR |
814 | source "arch/arm/mach-sunxi/Kconfig" |
815 | ||
d6de5b02 MG |
816 | source "arch/arm/mach-tango/Kconfig" |
817 | ||
c5f80065 EG |
818 | source "arch/arm/mach-tegra/Kconfig" |
819 | ||
95b8f20f | 820 | source "arch/arm/mach-u300/Kconfig" |
1da177e4 | 821 | |
ba56a987 MY |
822 | source "arch/arm/mach-uniphier/Kconfig" |
823 | ||
95b8f20f | 824 | source "arch/arm/mach-ux500/Kconfig" |
1da177e4 LT |
825 | |
826 | source "arch/arm/mach-versatile/Kconfig" | |
827 | ||
ceade897 | 828 | source "arch/arm/mach-vexpress/Kconfig" |
420c34e4 | 829 | source "arch/arm/plat-versatile/Kconfig" |
ceade897 | 830 | |
6f35f9a9 TP |
831 | source "arch/arm/mach-vt8500/Kconfig" |
832 | ||
7ec80ddf | 833 | source "arch/arm/mach-w90x900/Kconfig" |
834 | ||
acede515 JN |
835 | source "arch/arm/mach-zx/Kconfig" |
836 | ||
9a45eb69 JC |
837 | source "arch/arm/mach-zynq/Kconfig" |
838 | ||
499f1640 SA |
839 | # ARMv7-M architecture |
840 | config ARCH_EFM32 | |
841 | bool "Energy Micro efm32" | |
842 | depends on ARM_SINGLE_ARMV7M | |
5c34a4e8 | 843 | select GPIOLIB |
499f1640 SA |
844 | help |
845 | Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko | |
846 | processors. | |
847 | ||
848 | config ARCH_LPC18XX | |
849 | bool "NXP LPC18xx/LPC43xx" | |
850 | depends on ARM_SINGLE_ARMV7M | |
851 | select ARCH_HAS_RESET_CONTROLLER | |
852 | select ARM_AMBA | |
853 | select CLKSRC_LPC32XX | |
854 | select PINCTRL | |
855 | help | |
856 | Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4 | |
857 | high performance microcontrollers. | |
858 | ||
1847119d | 859 | config ARCH_MPS2 |
17bd274e | 860 | bool "ARM MPS2 platform" |
1847119d VM |
861 | depends on ARM_SINGLE_ARMV7M |
862 | select ARM_AMBA | |
863 | select CLKSRC_MPS2 | |
864 | help | |
865 | Support for Cortex-M Prototyping System (or V2M-MPS2) which comes | |
866 | with a range of available cores like Cortex-M3/M4/M7. | |
867 | ||
868 | Please, note that depends which Application Note is used memory map | |
869 | for the platform may vary, so adjustment of RAM base might be needed. | |
870 | ||
1da177e4 LT |
871 | # Definitions to make life easier |
872 | config ARCH_ACORN | |
873 | bool | |
874 | ||
7ae1f7ec LB |
875 | config PLAT_IOP |
876 | bool | |
469d3044 | 877 | select GENERIC_CLOCKEVENTS |
7ae1f7ec | 878 | |
69b02f6a LB |
879 | config PLAT_ORION |
880 | bool | |
bfe45e0b | 881 | select CLKSRC_MMIO |
b1b3f49c | 882 | select COMMON_CLK |
dc7ad3b3 | 883 | select GENERIC_IRQ_CHIP |
278b45b0 | 884 | select IRQ_DOMAIN |
69b02f6a | 885 | |
abcda1dc TP |
886 | config PLAT_ORION_LEGACY |
887 | bool | |
888 | select PLAT_ORION | |
889 | ||
bd5ce433 EM |
890 | config PLAT_PXA |
891 | bool | |
892 | ||
f4b8b319 RK |
893 | config PLAT_VERSATILE |
894 | bool | |
895 | ||
d9a1beaa AC |
896 | source "arch/arm/firmware/Kconfig" |
897 | ||
8636a1f9 | 898 | source "arch/arm/mm/Kconfig" |
1da177e4 | 899 | |
afe4b25e | 900 | config IWMMXT |
d93003e8 SH |
901 | bool "Enable iWMMXt support" |
902 | depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B | |
903 | default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B | |
afe4b25e LB |
904 | help |
905 | Enable support for iWMMXt context switching at run time if | |
906 | running on a CPU that supports it. | |
907 | ||
3b93e7b0 HC |
908 | if !MMU |
909 | source "arch/arm/Kconfig-nommu" | |
910 | endif | |
911 | ||
3e0a07f8 GC |
912 | config PJ4B_ERRATA_4742 |
913 | bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" | |
914 | depends on CPU_PJ4B && MACH_ARMADA_370 | |
915 | default y | |
916 | help | |
917 | When coming out of either a Wait for Interrupt (WFI) or a Wait for | |
918 | Event (WFE) IDLE states, a specific timing sensitivity exists between | |
919 | the retiring WFI/WFE instructions and the newly issued subsequent | |
920 | instructions. This sensitivity can result in a CPU hang scenario. | |
921 | Workaround: | |
922 | The software must insert either a Data Synchronization Barrier (DSB) | |
923 | or Data Memory Barrier (DMB) command immediately after the WFI/WFE | |
924 | instruction | |
925 | ||
f0c4b8d6 WD |
926 | config ARM_ERRATA_326103 |
927 | bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" | |
928 | depends on CPU_V6 | |
929 | help | |
930 | Executing a SWP instruction to read-only memory does not set bit 11 | |
931 | of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to | |
932 | treat the access as a read, preventing a COW from occurring and | |
933 | causing the faulting task to livelock. | |
934 | ||
9cba3ccc CM |
935 | config ARM_ERRATA_411920 |
936 | bool "ARM errata: Invalidation of the Instruction Cache operation can fail" | |
e399b1a4 | 937 | depends on CPU_V6 || CPU_V6K |
9cba3ccc CM |
938 | help |
939 | Invalidation of the Instruction Cache operation can | |
940 | fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. | |
941 | It does not affect the MPCore. This option enables the ARM Ltd. | |
942 | recommended workaround. | |
943 | ||
7ce236fc CM |
944 | config ARM_ERRATA_430973 |
945 | bool "ARM errata: Stale prediction on replaced interworking branch" | |
946 | depends on CPU_V7 | |
947 | help | |
948 | This option enables the workaround for the 430973 Cortex-A8 | |
79403cda | 949 | r1p* erratum. If a code sequence containing an ARM/Thumb |
7ce236fc CM |
950 | interworking branch is replaced with another code sequence at the |
951 | same virtual address, whether due to self-modifying code or virtual | |
952 | to physical address re-mapping, Cortex-A8 does not recover from the | |
953 | stale interworking branch prediction. This results in Cortex-A8 | |
954 | executing the new code sequence in the incorrect ARM or Thumb state. | |
955 | The workaround enables the BTB/BTAC operations by setting ACTLR.IBE | |
956 | and also flushes the branch target cache at every context switch. | |
957 | Note that setting specific bits in the ACTLR register may not be | |
958 | available in non-secure mode. | |
959 | ||
855c551f CM |
960 | config ARM_ERRATA_458693 |
961 | bool "ARM errata: Processor deadlock when a false hazard is created" | |
962 | depends on CPU_V7 | |
62e4d357 | 963 | depends on !ARCH_MULTIPLATFORM |
855c551f CM |
964 | help |
965 | This option enables the workaround for the 458693 Cortex-A8 (r2p0) | |
966 | erratum. For very specific sequences of memory operations, it is | |
967 | possible for a hazard condition intended for a cache line to instead | |
968 | be incorrectly associated with a different cache line. This false | |
969 | hazard might then cause a processor deadlock. The workaround enables | |
970 | the L1 caching of the NEON accesses and disables the PLD instruction | |
971 | in the ACTLR register. Note that setting specific bits in the ACTLR | |
972 | register may not be available in non-secure mode. | |
973 | ||
0516e464 CM |
974 | config ARM_ERRATA_460075 |
975 | bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" | |
976 | depends on CPU_V7 | |
62e4d357 | 977 | depends on !ARCH_MULTIPLATFORM |
0516e464 CM |
978 | help |
979 | This option enables the workaround for the 460075 Cortex-A8 (r2p0) | |
980 | erratum. Any asynchronous access to the L2 cache may encounter a | |
981 | situation in which recent store transactions to the L2 cache are lost | |
982 | and overwritten with stale memory contents from external memory. The | |
983 | workaround disables the write-allocate mode for the L2 cache via the | |
984 | ACTLR register. Note that setting specific bits in the ACTLR register | |
985 | may not be available in non-secure mode. | |
986 | ||
9f05027c WD |
987 | config ARM_ERRATA_742230 |
988 | bool "ARM errata: DMB operation may be faulty" | |
989 | depends on CPU_V7 && SMP | |
62e4d357 | 990 | depends on !ARCH_MULTIPLATFORM |
9f05027c WD |
991 | help |
992 | This option enables the workaround for the 742230 Cortex-A9 | |
993 | (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction | |
994 | between two write operations may not ensure the correct visibility | |
995 | ordering of the two writes. This workaround sets a specific bit in | |
996 | the diagnostic register of the Cortex-A9 which causes the DMB | |
997 | instruction to behave as a DSB, ensuring the correct behaviour of | |
998 | the two writes. | |
999 | ||
a672e99b WD |
1000 | config ARM_ERRATA_742231 |
1001 | bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" | |
1002 | depends on CPU_V7 && SMP | |
62e4d357 | 1003 | depends on !ARCH_MULTIPLATFORM |
a672e99b WD |
1004 | help |
1005 | This option enables the workaround for the 742231 Cortex-A9 | |
1006 | (r2p0..r2p2) erratum. Under certain conditions, specific to the | |
1007 | Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, | |
1008 | accessing some data located in the same cache line, may get corrupted | |
1009 | data due to bad handling of the address hazard when the line gets | |
1010 | replaced from one of the CPUs at the same time as another CPU is | |
1011 | accessing it. This workaround sets specific bits in the diagnostic | |
1012 | register of the Cortex-A9 which reduces the linefill issuing | |
1013 | capabilities of the processor. | |
1014 | ||
69155794 JM |
1015 | config ARM_ERRATA_643719 |
1016 | bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" | |
1017 | depends on CPU_V7 && SMP | |
e5a5de44 | 1018 | default y |
69155794 JM |
1019 | help |
1020 | This option enables the workaround for the 643719 Cortex-A9 (prior to | |
1021 | r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR | |
1022 | register returns zero when it should return one. The workaround | |
1023 | corrects this value, ensuring cache maintenance operations which use | |
1024 | it behave as intended and avoiding data corruption. | |
1025 | ||
cdf357f1 WD |
1026 | config ARM_ERRATA_720789 |
1027 | bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" | |
e66dc745 | 1028 | depends on CPU_V7 |
cdf357f1 WD |
1029 | help |
1030 | This option enables the workaround for the 720789 Cortex-A9 (prior to | |
1031 | r2p0) erratum. A faulty ASID can be sent to the other CPUs for the | |
1032 | broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. | |
1033 | As a consequence of this erratum, some TLB entries which should be | |
1034 | invalidated are not, resulting in an incoherency in the system page | |
1035 | tables. The workaround changes the TLB flushing routines to invalidate | |
1036 | entries regardless of the ASID. | |
475d92fc WD |
1037 | |
1038 | config ARM_ERRATA_743622 | |
1039 | bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" | |
1040 | depends on CPU_V7 | |
62e4d357 | 1041 | depends on !ARCH_MULTIPLATFORM |
475d92fc WD |
1042 | help |
1043 | This option enables the workaround for the 743622 Cortex-A9 | |
efbc74ac | 1044 | (r2p*) erratum. Under very rare conditions, a faulty |
475d92fc WD |
1045 | optimisation in the Cortex-A9 Store Buffer may lead to data |
1046 | corruption. This workaround sets a specific bit in the diagnostic | |
1047 | register of the Cortex-A9 which disables the Store Buffer | |
1048 | optimisation, preventing the defect from occurring. This has no | |
1049 | visible impact on the overall performance or power consumption of the | |
1050 | processor. | |
1051 | ||
9a27c27c WD |
1052 | config ARM_ERRATA_751472 |
1053 | bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" | |
ba90c516 | 1054 | depends on CPU_V7 |
62e4d357 | 1055 | depends on !ARCH_MULTIPLATFORM |
9a27c27c WD |
1056 | help |
1057 | This option enables the workaround for the 751472 Cortex-A9 (prior | |
1058 | to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the | |
1059 | completion of a following broadcasted operation if the second | |
1060 | operation is received by a CPU before the ICIALLUIS has completed, | |
1061 | potentially leading to corrupted entries in the cache or TLB. | |
1062 | ||
fcbdc5fe WD |
1063 | config ARM_ERRATA_754322 |
1064 | bool "ARM errata: possible faulty MMU translations following an ASID switch" | |
1065 | depends on CPU_V7 | |
1066 | help | |
1067 | This option enables the workaround for the 754322 Cortex-A9 (r2p*, | |
1068 | r3p*) erratum. A speculative memory access may cause a page table walk | |
1069 | which starts prior to an ASID switch but completes afterwards. This | |
1070 | can populate the micro-TLB with a stale entry which may be hit with | |
1071 | the new ASID. This workaround places two dsb instructions in the mm | |
1072 | switching code so that no page table walks can cross the ASID switch. | |
1073 | ||
5dab26af WD |
1074 | config ARM_ERRATA_754327 |
1075 | bool "ARM errata: no automatic Store Buffer drain" | |
1076 | depends on CPU_V7 && SMP | |
1077 | help | |
1078 | This option enables the workaround for the 754327 Cortex-A9 (prior to | |
1079 | r2p0) erratum. The Store Buffer does not have any automatic draining | |
1080 | mechanism and therefore a livelock may occur if an external agent | |
1081 | continuously polls a memory location waiting to observe an update. | |
1082 | This workaround defines cpu_relax() as smp_mb(), preventing correctly | |
1083 | written polling loops from denying visibility of updates to memory. | |
1084 | ||
145e10e1 CM |
1085 | config ARM_ERRATA_364296 |
1086 | bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" | |
fd832478 | 1087 | depends on CPU_V6 |
145e10e1 CM |
1088 | help |
1089 | This options enables the workaround for the 364296 ARM1136 | |
1090 | r0p2 erratum (possible cache data corruption with | |
1091 | hit-under-miss enabled). It sets the undocumented bit 31 in | |
1092 | the auxiliary control register and the FI bit in the control | |
1093 | register, thus disabling hit-under-miss without putting the | |
1094 | processor into full low interrupt latency mode. ARM11MPCore | |
1095 | is not affected. | |
1096 | ||
f630c1bd WD |
1097 | config ARM_ERRATA_764369 |
1098 | bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" | |
1099 | depends on CPU_V7 && SMP | |
1100 | help | |
1101 | This option enables the workaround for erratum 764369 | |
1102 | affecting Cortex-A9 MPCore with two or more processors (all | |
1103 | current revisions). Under certain timing circumstances, a data | |
1104 | cache line maintenance operation by MVA targeting an Inner | |
1105 | Shareable memory region may fail to proceed up to either the | |
1106 | Point of Coherency or to the Point of Unification of the | |
1107 | system. This workaround adds a DSB instruction before the | |
1108 | relevant cache maintenance functions and sets a specific bit | |
1109 | in the diagnostic control register of the SCU. | |
1110 | ||
7253b85c SH |
1111 | config ARM_ERRATA_775420 |
1112 | bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" | |
1113 | depends on CPU_V7 | |
1114 | help | |
1115 | This option enables the workaround for the 775420 Cortex-A9 (r2p2, | |
1116 | r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance | |
1117 | operation aborts with MMU exception, it might cause the processor | |
1118 | to deadlock. This workaround puts DSB before executing ISB if | |
1119 | an abort may occur on cache maintenance. | |
1120 | ||
93dc6887 CM |
1121 | config ARM_ERRATA_798181 |
1122 | bool "ARM errata: TLBI/DSB failure on Cortex-A15" | |
1123 | depends on CPU_V7 && SMP | |
1124 | help | |
1125 | On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not | |
1126 | adequately shooting down all use of the old entries. This | |
1127 | option enables the Linux kernel workaround for this erratum | |
1128 | which sends an IPI to the CPUs that are running the same ASID | |
1129 | as the one being invalidated. | |
1130 | ||
84b6504f WD |
1131 | config ARM_ERRATA_773022 |
1132 | bool "ARM errata: incorrect instructions may be executed from loop buffer" | |
1133 | depends on CPU_V7 | |
1134 | help | |
1135 | This option enables the workaround for the 773022 Cortex-A15 | |
1136 | (up to r0p4) erratum. In certain rare sequences of code, the | |
1137 | loop buffer may deliver incorrect instructions. This | |
1138 | workaround disables the loop buffer to avoid the erratum. | |
1139 | ||
62c0f4a5 DA |
1140 | config ARM_ERRATA_818325_852422 |
1141 | bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption" | |
1142 | depends on CPU_V7 | |
1143 | help | |
1144 | This option enables the workaround for: | |
1145 | - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM | |
1146 | instruction might deadlock. Fixed in r0p1. | |
1147 | - Cortex-A12 852422: Execution of a sequence of instructions might | |
1148 | lead to either a data corruption or a CPU deadlock. Not fixed in | |
1149 | any Cortex-A12 cores yet. | |
1150 | This workaround for all both errata involves setting bit[12] of the | |
1151 | Feature Register. This bit disables an optimisation applied to a | |
1152 | sequence of 2 instructions that use opposing condition codes. | |
1153 | ||
416bcf21 DA |
1154 | config ARM_ERRATA_821420 |
1155 | bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock" | |
1156 | depends on CPU_V7 | |
1157 | help | |
1158 | This option enables the workaround for the 821420 Cortex-A12 | |
1159 | (all revs) erratum. In very rare timing conditions, a sequence | |
1160 | of VMOV to Core registers instructions, for which the second | |
1161 | one is in the shadow of a branch or abort, can lead to a | |
1162 | deadlock when the VMOV instructions are issued out-of-order. | |
1163 | ||
9f6f9354 DA |
1164 | config ARM_ERRATA_825619 |
1165 | bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock" | |
1166 | depends on CPU_V7 | |
1167 | help | |
1168 | This option enables the workaround for the 825619 Cortex-A12 | |
1169 | (all revs) erratum. Within rare timing constraints, executing a | |
1170 | DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable | |
1171 | and Device/Strongly-Ordered loads and stores might cause deadlock | |
1172 | ||
1173 | config ARM_ERRATA_852421 | |
1174 | bool "ARM errata: A17: DMB ST might fail to create order between stores" | |
1175 | depends on CPU_V7 | |
1176 | help | |
1177 | This option enables the workaround for the 852421 Cortex-A17 | |
1178 | (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions, | |
1179 | execution of a DMB ST instruction might fail to properly order | |
1180 | stores from GroupA and stores from GroupB. | |
1181 | ||
62c0f4a5 DA |
1182 | config ARM_ERRATA_852423 |
1183 | bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption" | |
1184 | depends on CPU_V7 | |
1185 | help | |
1186 | This option enables the workaround for: | |
1187 | - Cortex-A17 852423: Execution of a sequence of instructions might | |
1188 | lead to either a data corruption or a CPU deadlock. Not fixed in | |
1189 | any Cortex-A17 cores yet. | |
1190 | This is identical to Cortex-A12 erratum 852422. It is a separate | |
1191 | config option from the A12 erratum due to the way errata are checked | |
1192 | for and handled. | |
1193 | ||
1da177e4 LT |
1194 | endmenu |
1195 | ||
1196 | source "arch/arm/common/Kconfig" | |
1197 | ||
1da177e4 LT |
1198 | menu "Bus support" |
1199 | ||
1da177e4 LT |
1200 | config ISA |
1201 | bool | |
1da177e4 LT |
1202 | help |
1203 | Find out whether you have ISA slots on your motherboard. ISA is the | |
1204 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
1205 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
1206 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
1207 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
1208 | ||
065909b9 | 1209 | # Select ISA DMA controller support |
1da177e4 LT |
1210 | config ISA_DMA |
1211 | bool | |
065909b9 | 1212 | select ISA_DMA_API |
1da177e4 | 1213 | |
065909b9 | 1214 | # Select ISA DMA interface |
5cae841b AV |
1215 | config ISA_DMA_API |
1216 | bool | |
5cae841b | 1217 | |
b080ac8a MRJ |
1218 | config PCI_NANOENGINE |
1219 | bool "BSE nanoEngine PCI support" | |
1220 | depends on SA1100_NANOENGINE | |
1221 | help | |
1222 | Enable PCI on the BSE nanoEngine board. | |
1223 | ||
a0113a99 MR |
1224 | config PCI_HOST_ITE8152 |
1225 | bool | |
1226 | depends on PCI && MACH_ARMCORE | |
1227 | default y | |
1228 | select DMABOUNCE | |
1229 | ||
1da177e4 LT |
1230 | endmenu |
1231 | ||
1232 | menu "Kernel Features" | |
1233 | ||
3b55658a DM |
1234 | config HAVE_SMP |
1235 | bool | |
1236 | help | |
1237 | This option should be selected by machines which have an SMP- | |
1238 | capable CPU. | |
1239 | ||
1240 | The only effect of this option is to make the SMP-related | |
1241 | options available to the user for configuration. | |
1242 | ||
1da177e4 | 1243 | config SMP |
bb2d8130 | 1244 | bool "Symmetric Multi-Processing" |
fbb4ddac | 1245 | depends on CPU_V6K || CPU_V7 |
bc28248e | 1246 | depends on GENERIC_CLOCKEVENTS |
3b55658a | 1247 | depends on HAVE_SMP |
801bb21c | 1248 | depends on MMU || ARM_MPU |
0361748f | 1249 | select IRQ_WORK |
1da177e4 LT |
1250 | help |
1251 | This enables support for systems with more than one CPU. If you have | |
4a474157 RG |
1252 | a system with only one CPU, say N. If you have a system with more |
1253 | than one CPU, say Y. | |
1da177e4 | 1254 | |
4a474157 | 1255 | If you say N here, the kernel will run on uni- and multiprocessor |
1da177e4 | 1256 | machines, but will use only one CPU of a multiprocessor machine. If |
4a474157 RG |
1257 | you say Y here, the kernel will run on many, but not all, |
1258 | uniprocessor machines. On a uniprocessor machine, the kernel | |
1259 | will run faster if you say N here. | |
1da177e4 | 1260 | |
395cf969 | 1261 | See also <file:Documentation/x86/i386/IO-APIC.txt>, |
ecf38679 | 1262 | <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at |
50a23e6e | 1263 | <http://tldp.org/HOWTO/SMP-HOWTO.html>. |
1da177e4 LT |
1264 | |
1265 | If you don't know what to do here, say N. | |
1266 | ||
f00ec48f | 1267 | config SMP_ON_UP |
5744ff43 | 1268 | bool "Allow booting SMP kernel on uniprocessor systems" |
801bb21c | 1269 | depends on SMP && !XIP_KERNEL && MMU |
f00ec48f RK |
1270 | default y |
1271 | help | |
1272 | SMP kernels contain instructions which fail on non-SMP processors. | |
1273 | Enabling this option allows the kernel to modify itself to make | |
1274 | these instructions safe. Disabling it allows about 1K of space | |
1275 | savings. | |
1276 | ||
1277 | If you don't know what to do here, say Y. | |
1278 | ||
c9018aab VG |
1279 | config ARM_CPU_TOPOLOGY |
1280 | bool "Support cpu topology definition" | |
1281 | depends on SMP && CPU_V7 | |
1282 | default y | |
1283 | help | |
1284 | Support ARM cpu topology definition. The MPIDR register defines | |
1285 | affinity between processors which is then used to describe the cpu | |
1286 | topology of an ARM System. | |
1287 | ||
1288 | config SCHED_MC | |
1289 | bool "Multi-core scheduler support" | |
1290 | depends on ARM_CPU_TOPOLOGY | |
1291 | help | |
1292 | Multi-core scheduler support improves the CPU scheduler's decision | |
1293 | making when dealing with multi-core CPU chips at a cost of slightly | |
1294 | increased overhead in some places. If unsure say N here. | |
1295 | ||
1296 | config SCHED_SMT | |
1297 | bool "SMT scheduler support" | |
1298 | depends on ARM_CPU_TOPOLOGY | |
1299 | help | |
1300 | Improves the CPU scheduler's decision making when dealing with | |
1301 | MultiThreading at a cost of slightly increased overhead in some | |
1302 | places. If unsure say N here. | |
1303 | ||
a8cbcd92 RK |
1304 | config HAVE_ARM_SCU |
1305 | bool | |
a8cbcd92 RK |
1306 | help |
1307 | This option enables support for the ARM system coherency unit | |
1308 | ||
8a4da6e3 | 1309 | config HAVE_ARM_ARCH_TIMER |
022c03a2 MZ |
1310 | bool "Architected timer support" |
1311 | depends on CPU_V7 | |
8a4da6e3 | 1312 | select ARM_ARCH_TIMER |
0c403462 | 1313 | select GENERIC_CLOCKEVENTS |
022c03a2 MZ |
1314 | help |
1315 | This option enables support for the ARM architected timer | |
1316 | ||
f32f4ce2 RK |
1317 | config HAVE_ARM_TWD |
1318 | bool | |
bb0eb050 | 1319 | select TIMER_OF if OF |
f32f4ce2 RK |
1320 | help |
1321 | This options enables support for the ARM timer and watchdog unit | |
1322 | ||
e8db288e NP |
1323 | config MCPM |
1324 | bool "Multi-Cluster Power Management" | |
1325 | depends on CPU_V7 && SMP | |
1326 | help | |
1327 | This option provides the common power management infrastructure | |
1328 | for (multi-)cluster based systems, such as big.LITTLE based | |
1329 | systems. | |
1330 | ||
ebf4a5c5 HZ |
1331 | config MCPM_QUAD_CLUSTER |
1332 | bool | |
1333 | depends on MCPM | |
1334 | help | |
1335 | To avoid wasting resources unnecessarily, MCPM only supports up | |
1336 | to 2 clusters by default. | |
1337 | Platforms with 3 or 4 clusters that use MCPM must select this | |
1338 | option to allow the additional clusters to be managed. | |
1339 | ||
1c33be57 NP |
1340 | config BIG_LITTLE |
1341 | bool "big.LITTLE support (Experimental)" | |
1342 | depends on CPU_V7 && SMP | |
1343 | select MCPM | |
1344 | help | |
1345 | This option enables support selections for the big.LITTLE | |
1346 | system architecture. | |
1347 | ||
1348 | config BL_SWITCHER | |
1349 | bool "big.LITTLE switcher support" | |
6c044fec | 1350 | depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC |
51aaf81f | 1351 | select CPU_PM |
1c33be57 NP |
1352 | help |
1353 | The big.LITTLE "switcher" provides the core functionality to | |
1354 | transparently handle transition between a cluster of A15's | |
1355 | and a cluster of A7's in a big.LITTLE system. | |
1356 | ||
b22537c6 NP |
1357 | config BL_SWITCHER_DUMMY_IF |
1358 | tristate "Simple big.LITTLE switcher user interface" | |
1359 | depends on BL_SWITCHER && DEBUG_KERNEL | |
1360 | help | |
1361 | This is a simple and dummy char dev interface to control | |
1362 | the big.LITTLE switcher core code. It is meant for | |
1363 | debugging purposes only. | |
1364 | ||
8d5796d2 LB |
1365 | choice |
1366 | prompt "Memory split" | |
006fa259 | 1367 | depends on MMU |
8d5796d2 LB |
1368 | default VMSPLIT_3G |
1369 | help | |
1370 | Select the desired split between kernel and user memory. | |
1371 | ||
1372 | If you are not absolutely sure what you are doing, leave this | |
1373 | option alone! | |
1374 | ||
1375 | config VMSPLIT_3G | |
1376 | bool "3G/1G user/kernel split" | |
63ce446c | 1377 | config VMSPLIT_3G_OPT |
bbeedfda | 1378 | depends on !ARM_LPAE |
63ce446c | 1379 | bool "3G/1G user/kernel split (for full 1G low memory)" |
8d5796d2 LB |
1380 | config VMSPLIT_2G |
1381 | bool "2G/2G user/kernel split" | |
1382 | config VMSPLIT_1G | |
1383 | bool "1G/3G user/kernel split" | |
1384 | endchoice | |
1385 | ||
1386 | config PAGE_OFFSET | |
1387 | hex | |
006fa259 | 1388 | default PHYS_OFFSET if !MMU |
8d5796d2 LB |
1389 | default 0x40000000 if VMSPLIT_1G |
1390 | default 0x80000000 if VMSPLIT_2G | |
63ce446c | 1391 | default 0xB0000000 if VMSPLIT_3G_OPT |
8d5796d2 LB |
1392 | default 0xC0000000 |
1393 | ||
1da177e4 LT |
1394 | config NR_CPUS |
1395 | int "Maximum number of CPUs (2-32)" | |
1396 | range 2 32 | |
1397 | depends on SMP | |
1398 | default "4" | |
1399 | ||
a054a811 | 1400 | config HOTPLUG_CPU |
00b7dede | 1401 | bool "Support for hot-pluggable CPUs" |
40b31360 | 1402 | depends on SMP |
a054a811 RK |
1403 | help |
1404 | Say Y here to experiment with turning CPUs off and on. CPUs | |
1405 | can be controlled through /sys/devices/system/cpu. | |
1406 | ||
2bdd424f WD |
1407 | config ARM_PSCI |
1408 | bool "Support for the ARM Power State Coordination Interface (PSCI)" | |
e679660d | 1409 | depends on HAVE_ARM_SMCCC |
be120397 | 1410 | select ARM_PSCI_FW |
2bdd424f WD |
1411 | help |
1412 | Say Y here if you want Linux to communicate with system firmware | |
1413 | implementing the PSCI specification for CPU-centric power | |
1414 | management operations described in ARM document number ARM DEN | |
1415 | 0022A ("Power State Coordination Interface System Software on | |
1416 | ARM processors"). | |
1417 | ||
2a6ad871 MR |
1418 | # The GPIO number here must be sorted by descending number. In case of |
1419 | # a multiplatform kernel, we just want the highest value required by the | |
1420 | # selected platforms. | |
44986ab0 PDSN |
1421 | config ARCH_NR_GPIO |
1422 | int | |
139358be | 1423 | default 2048 if ARCH_SOCFPGA |
d9be9ceb | 1424 | default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \ |
b35d2e56 | 1425 | ARCH_ZYNQ |
aa42587a TF |
1426 | default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ |
1427 | SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 | |
eb171a99 | 1428 | default 416 if ARCH_SUNXI |
06b851e5 | 1429 | default 392 if ARCH_U8500 |
01bb914c | 1430 | default 352 if ARCH_VT8500 |
7b5da4c3 | 1431 | default 288 if ARCH_ROCKCHIP |
2a6ad871 | 1432 | default 264 if MACH_H4700 |
44986ab0 PDSN |
1433 | default 0 |
1434 | help | |
1435 | Maximum number of GPIOs in the system. | |
1436 | ||
1437 | If unsure, leave the default value. | |
1438 | ||
c9218b16 | 1439 | config HZ_FIXED |
f8065813 | 1440 | int |
da6b21e9 | 1441 | default 200 if ARCH_EBSA110 |
1164f672 | 1442 | default 128 if SOC_AT91RM9200 |
47d84682 | 1443 | default 0 |
c9218b16 RK |
1444 | |
1445 | choice | |
47d84682 | 1446 | depends on HZ_FIXED = 0 |
c9218b16 RK |
1447 | prompt "Timer frequency" |
1448 | ||
1449 | config HZ_100 | |
1450 | bool "100 Hz" | |
1451 | ||
1452 | config HZ_200 | |
1453 | bool "200 Hz" | |
1454 | ||
1455 | config HZ_250 | |
1456 | bool "250 Hz" | |
1457 | ||
1458 | config HZ_300 | |
1459 | bool "300 Hz" | |
1460 | ||
1461 | config HZ_500 | |
1462 | bool "500 Hz" | |
1463 | ||
1464 | config HZ_1000 | |
1465 | bool "1000 Hz" | |
1466 | ||
1467 | endchoice | |
1468 | ||
1469 | config HZ | |
1470 | int | |
47d84682 | 1471 | default HZ_FIXED if HZ_FIXED != 0 |
c9218b16 RK |
1472 | default 100 if HZ_100 |
1473 | default 200 if HZ_200 | |
1474 | default 250 if HZ_250 | |
1475 | default 300 if HZ_300 | |
1476 | default 500 if HZ_500 | |
1477 | default 1000 | |
1478 | ||
1479 | config SCHED_HRTICK | |
1480 | def_bool HIGH_RES_TIMERS | |
f8065813 | 1481 | |
16c79651 | 1482 | config THUMB2_KERNEL |
bc7dea00 | 1483 | bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY |
4477ca45 | 1484 | depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K |
bc7dea00 | 1485 | default y if CPU_THUMBONLY |
89bace65 | 1486 | select ARM_UNWIND |
16c79651 CM |
1487 | help |
1488 | By enabling this option, the kernel will be compiled in | |
75fea300 | 1489 | Thumb-2 mode. |
16c79651 CM |
1490 | |
1491 | If unsure, say N. | |
1492 | ||
6f685c5c DM |
1493 | config THUMB2_AVOID_R_ARM_THM_JUMP11 |
1494 | bool "Work around buggy Thumb-2 short branch relocations in gas" | |
1495 | depends on THUMB2_KERNEL && MODULES | |
1496 | default y | |
1497 | help | |
1498 | Various binutils versions can resolve Thumb-2 branches to | |
1499 | locally-defined, preemptible global symbols as short-range "b.n" | |
1500 | branch instructions. | |
1501 | ||
1502 | This is a problem, because there's no guarantee the final | |
1503 | destination of the symbol, or any candidate locations for a | |
1504 | trampoline, are within range of the branch. For this reason, the | |
1505 | kernel does not support fixing up the R_ARM_THM_JUMP11 (102) | |
1506 | relocation in modules at all, and it makes little sense to add | |
1507 | support. | |
1508 | ||
1509 | The symptom is that the kernel fails with an "unsupported | |
1510 | relocation" error when loading some modules. | |
1511 | ||
1512 | Until fixed tools are available, passing | |
1513 | -fno-optimize-sibling-calls to gcc should prevent gcc generating | |
1514 | code which hits this problem, at the cost of a bit of extra runtime | |
1515 | stack usage in some cases. | |
1516 | ||
1517 | The problem is described in more detail at: | |
1518 | https://bugs.launchpad.net/binutils-linaro/+bug/725126 | |
1519 | ||
1520 | Only Thumb-2 kernels are affected. | |
1521 | ||
1522 | Unless you are sure your tools don't have this problem, say Y. | |
1523 | ||
42f25bdd NP |
1524 | config ARM_PATCH_IDIV |
1525 | bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" | |
1526 | depends on CPU_32v7 && !XIP_KERNEL | |
1527 | default y | |
1528 | help | |
1529 | The ARM compiler inserts calls to __aeabi_idiv() and | |
1530 | __aeabi_uidiv() when it needs to perform division on signed | |
1531 | and unsigned integers. Some v7 CPUs have support for the sdiv | |
1532 | and udiv instructions that can be used to implement those | |
1533 | functions. | |
1534 | ||
1535 | Enabling this option allows the kernel to modify itself to | |
1536 | replace the first two instructions of these library functions | |
1537 | with the sdiv or udiv plus "bx lr" instructions when the CPU | |
1538 | it is running on supports them. Typically this will be faster | |
1539 | and less power intensive than running the original library | |
1540 | code to do integer division. | |
1541 | ||
704bdda0 | 1542 | config AEABI |
49460970 RK |
1543 | bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && !CPU_V7M && !CPU_V6 && !CPU_V6K |
1544 | default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K | |
704bdda0 NP |
1545 | help |
1546 | This option allows for the kernel to be compiled using the latest | |
1547 | ARM ABI (aka EABI). This is only useful if you are using a user | |
1548 | space environment that is also compiled with EABI. | |
1549 | ||
1550 | Since there are major incompatibilities between the legacy ABI and | |
1551 | EABI, especially with regard to structure member alignment, this | |
1552 | option also changes the kernel syscall calling convention to | |
1553 | disambiguate both ABIs and allow for backward compatibility support | |
1554 | (selected with CONFIG_OABI_COMPAT). | |
1555 | ||
1556 | To use this you need GCC version 4.0.0 or later. | |
1557 | ||
6c90c872 | 1558 | config OABI_COMPAT |
a73a3ff1 | 1559 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
d6f94fa0 | 1560 | depends on AEABI && !THUMB2_KERNEL |
6c90c872 NP |
1561 | help |
1562 | This option preserves the old syscall interface along with the | |
1563 | new (ARM EABI) one. It also provides a compatibility layer to | |
1564 | intercept syscalls that have structure arguments which layout | |
1565 | in memory differs between the legacy ABI and the new ARM EABI | |
1566 | (only for non "thumb" binaries). This option adds a tiny | |
1567 | overhead to all syscalls and produces a slightly larger kernel. | |
91702175 KC |
1568 | |
1569 | The seccomp filter system will not be available when this is | |
1570 | selected, since there is no way yet to sensibly distinguish | |
1571 | between calling conventions during filtering. | |
1572 | ||
6c90c872 NP |
1573 | If you know you'll be using only pure EABI user space then you |
1574 | can say N here. If this option is not selected and you attempt | |
1575 | to execute a legacy ABI binary then the result will be | |
1576 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
b02f8467 | 1577 | at all). If in doubt say N. |
6c90c872 | 1578 | |
eb33575c | 1579 | config ARCH_HAS_HOLES_MEMORYMODEL |
e80d6a24 | 1580 | bool |
e80d6a24 | 1581 | |
05944d74 RK |
1582 | config ARCH_SPARSEMEM_ENABLE |
1583 | bool | |
1584 | ||
07a2f737 RK |
1585 | config ARCH_SPARSEMEM_DEFAULT |
1586 | def_bool ARCH_SPARSEMEM_ENABLE | |
1587 | ||
05944d74 | 1588 | config ARCH_SELECT_MEMORY_MODEL |
be370302 | 1589 | def_bool ARCH_SPARSEMEM_ENABLE |
c80d79d7 | 1590 | |
7b7bf499 WD |
1591 | config HAVE_ARCH_PFN_VALID |
1592 | def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM | |
1593 | ||
e585513b | 1594 | config HAVE_GENERIC_GUP |
b8cd51af SC |
1595 | def_bool y |
1596 | depends on ARM_LPAE | |
1597 | ||
053a96ca | 1598 | config HIGHMEM |
e8db89a2 RK |
1599 | bool "High Memory Support" |
1600 | depends on MMU | |
053a96ca NP |
1601 | help |
1602 | The address space of ARM processors is only 4 Gigabytes large | |
1603 | and it has to accommodate user address space, kernel address | |
1604 | space as well as some memory mapped IO. That means that, if you | |
1605 | have a large amount of physical memory and/or IO, not all of the | |
1606 | memory can be "permanently mapped" by the kernel. The physical | |
1607 | memory that is not permanently mapped is called "high memory". | |
1608 | ||
1609 | Depending on the selected kernel/user memory split, minimum | |
1610 | vmalloc space and actual amount of RAM, you may not need this | |
1611 | option which should result in a slightly faster kernel. | |
1612 | ||
1613 | If unsure, say n. | |
1614 | ||
65cec8e3 | 1615 | config HIGHPTE |
9a431bd5 | 1616 | bool "Allocate 2nd-level pagetables from highmem" if EXPERT |
65cec8e3 | 1617 | depends on HIGHMEM |
9a431bd5 | 1618 | default y |
b4d103d1 RK |
1619 | help |
1620 | The VM uses one page of physical memory for each page table. | |
1621 | For systems with a lot of processes, this can use a lot of | |
1622 | precious low memory, eventually leading to low memory being | |
1623 | consumed by page tables. Setting this option will allow | |
1624 | user-space 2nd level page tables to reside in high memory. | |
65cec8e3 | 1625 | |
a5e090ac RK |
1626 | config CPU_SW_DOMAIN_PAN |
1627 | bool "Enable use of CPU domains to implement privileged no-access" | |
1628 | depends on MMU && !ARM_LPAE | |
1b8873a0 JI |
1629 | default y |
1630 | help | |
a5e090ac RK |
1631 | Increase kernel security by ensuring that normal kernel accesses |
1632 | are unable to access userspace addresses. This can help prevent | |
1633 | use-after-free bugs becoming an exploitable privilege escalation | |
1634 | by ensuring that magic values (such as LIST_POISON) will always | |
1635 | fault when dereferenced. | |
1636 | ||
1637 | CPUs with low-vector mappings use a best-efforts implementation. | |
1638 | Their lower 1MB needs to remain accessible for the vectors, but | |
1639 | the remainder of userspace will become appropriately inaccessible. | |
65cec8e3 | 1640 | |
1b8873a0 | 1641 | config HW_PERF_EVENTS |
fa8ad788 MR |
1642 | def_bool y |
1643 | depends on ARM_PMU | |
1b8873a0 | 1644 | |
1355e2a6 CM |
1645 | config SYS_SUPPORTS_HUGETLBFS |
1646 | def_bool y | |
1647 | depends on ARM_LPAE | |
1648 | ||
8d962507 CM |
1649 | config HAVE_ARCH_TRANSPARENT_HUGEPAGE |
1650 | def_bool y | |
1651 | depends on ARM_LPAE | |
1652 | ||
4bfab203 SC |
1653 | config ARCH_WANT_GENERAL_HUGETLB |
1654 | def_bool y | |
1655 | ||
7d485f64 AB |
1656 | config ARM_MODULE_PLTS |
1657 | bool "Use PLTs to allow module memory to spill over into vmalloc area" | |
1658 | depends on MODULES | |
e7229f7d | 1659 | default y |
7d485f64 AB |
1660 | help |
1661 | Allocate PLTs when loading modules so that jumps and calls whose | |
1662 | targets are too far away for their relative offsets to be encoded | |
1663 | in the instructions themselves can be bounced via veneers in the | |
1664 | module's PLT. This allows modules to be allocated in the generic | |
1665 | vmalloc area after the dedicated module memory area has been | |
1666 | exhausted. The modules will use slightly more memory, but after | |
1667 | rounding up to page size, the actual memory footprint is usually | |
1668 | the same. | |
1669 | ||
e7229f7d AR |
1670 | Disabling this is usually safe for small single-platform |
1671 | configurations. If unsure, say y. | |
7d485f64 | 1672 | |
c1b2d970 | 1673 | config FORCE_MAX_ZONEORDER |
36d6c928 | 1674 | int "Maximum zone order" |
898f08e1 | 1675 | default "12" if SOC_AM33XX |
6d85e2b0 | 1676 | default "9" if SA1111 || ARCH_EFM32 |
c1b2d970 MD |
1677 | default "11" |
1678 | help | |
1679 | The kernel memory allocator divides physically contiguous memory | |
1680 | blocks into "zones", where each zone is a power of two number of | |
1681 | pages. This option selects the largest power of two that the kernel | |
1682 | keeps in the memory allocator. If you need to allocate very large | |
1683 | blocks of physically contiguous memory, then you may need to | |
1684 | increase this value. | |
1685 | ||
1686 | This config option is actually maximum order plus one. For example, | |
1687 | a value of 11 means that the largest free memory block is 2^10 pages. | |
1688 | ||
1da177e4 LT |
1689 | config ALIGNMENT_TRAP |
1690 | bool | |
f12d0d7c | 1691 | depends on CPU_CP15_MMU |
1da177e4 | 1692 | default y if !ARCH_EBSA110 |
e119bfff | 1693 | select HAVE_PROC_CPU if PROC_FS |
1da177e4 | 1694 | help |
84eb8d06 | 1695 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
1696 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
1697 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
1698 | fetch/store instructions will be emulated in software if you say | |
1699 | here, which has a severe performance impact. This is necessary for | |
1700 | correct operation of some network protocols. With an IP-only | |
1701 | configuration it is safe to say N, otherwise say Y. | |
1702 | ||
39ec58f3 | 1703 | config UACCESS_WITH_MEMCPY |
38ef2ad5 LW |
1704 | bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" |
1705 | depends on MMU | |
39ec58f3 LB |
1706 | default y if CPU_FEROCEON |
1707 | help | |
1708 | Implement faster copy_to_user and clear_user methods for CPU | |
1709 | cores where a 8-word STM instruction give significantly higher | |
1710 | memory write throughput than a sequence of individual 32bit stores. | |
1711 | ||
1712 | A possible side effect is a slight increase in scheduling latency | |
1713 | between threads sharing the same address space if they invoke | |
1714 | such copy operations with large buffers. | |
1715 | ||
1716 | However, if the CPU data cache is using a write-allocate mode, | |
1717 | this option is unlikely to provide any performance gain. | |
1718 | ||
70c70d97 NP |
1719 | config SECCOMP |
1720 | bool | |
1721 | prompt "Enable seccomp to safely compute untrusted bytecode" | |
1722 | ---help--- | |
1723 | This kernel feature is useful for number crunching applications | |
1724 | that may need to compute untrusted bytecode during their | |
1725 | execution. By using pipes or other transports made available to | |
1726 | the process as file descriptors supporting the read/write | |
1727 | syscalls, it's possible to isolate those applications in | |
1728 | their own address space using seccomp. Once seccomp is | |
1729 | enabled via prctl(PR_SET_SECCOMP), it cannot be disabled | |
1730 | and the task is only allowed to execute a few safe syscalls | |
1731 | defined by each seccomp mode. | |
1732 | ||
02c2433b SS |
1733 | config PARAVIRT |
1734 | bool "Enable paravirtualization code" | |
1735 | help | |
1736 | This changes the kernel so it can modify itself when it is run | |
1737 | under a hypervisor, potentially improving performance significantly | |
1738 | over full virtualization. | |
1739 | ||
1740 | config PARAVIRT_TIME_ACCOUNTING | |
1741 | bool "Paravirtual steal time accounting" | |
1742 | select PARAVIRT | |
02c2433b SS |
1743 | help |
1744 | Select this option to enable fine granularity task steal time | |
1745 | accounting. Time spent executing other tasks in parallel with | |
1746 | the current vCPU is discounted from the vCPU power. To account for | |
1747 | that, there can be a small performance impact. | |
1748 | ||
1749 | If in doubt, say N here. | |
1750 | ||
eff8d644 SS |
1751 | config XEN_DOM0 |
1752 | def_bool y | |
1753 | depends on XEN | |
1754 | ||
1755 | config XEN | |
c2ba1f7d | 1756 | bool "Xen guest support on ARM" |
85323a99 | 1757 | depends on ARM && AEABI && OF |
f880b67d | 1758 | depends on CPU_V7 && !CPU_V6 |
85323a99 | 1759 | depends on !GENERIC_ATOMIC64 |
7693decc | 1760 | depends on MMU |
51aaf81f | 1761 | select ARCH_DMA_ADDR_T_64BIT |
17b7ab80 | 1762 | select ARM_PSCI |
f21254cd | 1763 | select SWIOTLB |
83862ccf | 1764 | select SWIOTLB_XEN |
02c2433b | 1765 | select PARAVIRT |
eff8d644 SS |
1766 | help |
1767 | Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. | |
1768 | ||
189af465 AB |
1769 | config STACKPROTECTOR_PER_TASK |
1770 | bool "Use a unique stack canary value for each task" | |
1771 | depends on GCC_PLUGINS && STACKPROTECTOR && SMP && !XIP_DEFLATED_DATA | |
1772 | select GCC_PLUGIN_ARM_SSP_PER_TASK | |
1773 | default y | |
1774 | help | |
1775 | Due to the fact that GCC uses an ordinary symbol reference from | |
1776 | which to load the value of the stack canary, this value can only | |
1777 | change at reboot time on SMP systems, and all tasks running in the | |
1778 | kernel's address space are forced to use the same canary value for | |
1779 | the entire duration that the system is up. | |
1780 | ||
1781 | Enable this option to switch to a different method that uses a | |
1782 | different canary value for each task. | |
1783 | ||
1da177e4 LT |
1784 | endmenu |
1785 | ||
1786 | menu "Boot options" | |
1787 | ||
9eb8f674 GL |
1788 | config USE_OF |
1789 | bool "Flattened Device Tree support" | |
b1b3f49c | 1790 | select IRQ_DOMAIN |
9eb8f674 | 1791 | select OF |
9eb8f674 GL |
1792 | help |
1793 | Include support for flattened device tree machine descriptions. | |
1794 | ||
bd51e2f5 NP |
1795 | config ATAGS |
1796 | bool "Support for the traditional ATAGS boot data passing" if USE_OF | |
1797 | default y | |
1798 | help | |
1799 | This is the traditional way of passing data to the kernel at boot | |
1800 | time. If you are solely relying on the flattened device tree (or | |
1801 | the ARM_ATAG_DTB_COMPAT option) then you may unselect this option | |
1802 | to remove ATAGS support from your kernel binary. If unsure, | |
1803 | leave this to y. | |
1804 | ||
1805 | config DEPRECATED_PARAM_STRUCT | |
1806 | bool "Provide old way to pass kernel parameters" | |
1807 | depends on ATAGS | |
1808 | help | |
1809 | This was deprecated in 2001 and announced to live on for 5 years. | |
1810 | Some old boot loaders still use this way. | |
1811 | ||
1da177e4 LT |
1812 | # Compressed boot loader in ROM. Yes, we really want to ask about |
1813 | # TEXT and BSS so we preserve their values in the config files. | |
1814 | config ZBOOT_ROM_TEXT | |
1815 | hex "Compressed ROM boot loader base address" | |
1816 | default "0" | |
1817 | help | |
1818 | The physical address at which the ROM-able zImage is to be | |
1819 | placed in the target. Platforms which normally make use of | |
1820 | ROM-able zImage formats normally set this to a suitable | |
1821 | value in their defconfig file. | |
1822 | ||
1823 | If ZBOOT_ROM is not enabled, this has no effect. | |
1824 | ||
1825 | config ZBOOT_ROM_BSS | |
1826 | hex "Compressed ROM boot loader BSS address" | |
1827 | default "0" | |
1828 | help | |
f8c440b2 DF |
1829 | The base address of an area of read/write memory in the target |
1830 | for the ROM-able zImage which must be available while the | |
1831 | decompressor is running. It must be large enough to hold the | |
1832 | entire decompressed kernel plus an additional 128 KiB. | |
1833 | Platforms which normally make use of ROM-able zImage formats | |
1834 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
1835 | |
1836 | If ZBOOT_ROM is not enabled, this has no effect. | |
1837 | ||
1838 | config ZBOOT_ROM | |
1839 | bool "Compressed boot loader in ROM/flash" | |
1840 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
10968131 | 1841 | depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR |
1da177e4 LT |
1842 | help |
1843 | Say Y here if you intend to execute your compressed kernel image | |
1844 | (zImage) directly from ROM or flash. If unsure, say N. | |
1845 | ||
e2a6a3aa JB |
1846 | config ARM_APPENDED_DTB |
1847 | bool "Use appended device tree blob to zImage (EXPERIMENTAL)" | |
10968131 | 1848 | depends on OF |
e2a6a3aa JB |
1849 | help |
1850 | With this option, the boot code will look for a device tree binary | |
1851 | (DTB) appended to zImage | |
1852 | (e.g. cat zImage <filename>.dtb > zImage_w_dtb). | |
1853 | ||
1854 | This is meant as a backward compatibility convenience for those | |
1855 | systems with a bootloader that can't be upgraded to accommodate | |
1856 | the documented boot protocol using a device tree. | |
1857 | ||
1858 | Beware that there is very little in terms of protection against | |
1859 | this option being confused by leftover garbage in memory that might | |
1860 | look like a DTB header after a reboot if no actual DTB is appended | |
1861 | to zImage. Do not leave this option active in a production kernel | |
1862 | if you don't intend to always append a DTB. Proper passing of the | |
1863 | location into r2 of a bootloader provided DTB is always preferable | |
1864 | to this option. | |
1865 | ||
b90b9a38 NP |
1866 | config ARM_ATAG_DTB_COMPAT |
1867 | bool "Supplement the appended DTB with traditional ATAG information" | |
1868 | depends on ARM_APPENDED_DTB | |
1869 | help | |
1870 | Some old bootloaders can't be updated to a DTB capable one, yet | |
1871 | they provide ATAGs with memory configuration, the ramdisk address, | |
1872 | the kernel cmdline string, etc. Such information is dynamically | |
1873 | provided by the bootloader and can't always be stored in a static | |
1874 | DTB. To allow a device tree enabled kernel to be used with such | |
1875 | bootloaders, this option allows zImage to extract the information | |
1876 | from the ATAG list and store it at run time into the appended DTB. | |
1877 | ||
d0f34a11 GR |
1878 | choice |
1879 | prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT | |
1880 | default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1881 | ||
1882 | config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1883 | bool "Use bootloader kernel arguments if available" | |
1884 | help | |
1885 | Uses the command-line options passed by the boot loader instead of | |
1886 | the device tree bootargs property. If the boot loader doesn't provide | |
1887 | any, the device tree bootargs property will be used. | |
1888 | ||
1889 | config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND | |
1890 | bool "Extend with bootloader kernel arguments" | |
1891 | help | |
1892 | The command-line arguments provided by the boot loader will be | |
1893 | appended to the the device tree bootargs property. | |
1894 | ||
1895 | endchoice | |
1896 | ||
1da177e4 LT |
1897 | config CMDLINE |
1898 | string "Default kernel command string" | |
1899 | default "" | |
1900 | help | |
1901 | On some architectures (EBSA110 and CATS), there is currently no way | |
1902 | for the boot loader to pass arguments to the kernel. For these | |
1903 | architectures, you should supply some command-line options at build | |
1904 | time by entering them here. As a minimum, you should specify the | |
1905 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
1906 | ||
4394c124 VB |
1907 | choice |
1908 | prompt "Kernel command line type" if CMDLINE != "" | |
1909 | default CMDLINE_FROM_BOOTLOADER | |
bd51e2f5 | 1910 | depends on ATAGS |
4394c124 VB |
1911 | |
1912 | config CMDLINE_FROM_BOOTLOADER | |
1913 | bool "Use bootloader kernel arguments if available" | |
1914 | help | |
1915 | Uses the command-line options passed by the boot loader. If | |
1916 | the boot loader doesn't provide any, the default kernel command | |
1917 | string provided in CMDLINE will be used. | |
1918 | ||
1919 | config CMDLINE_EXTEND | |
1920 | bool "Extend bootloader kernel arguments" | |
1921 | help | |
1922 | The command-line arguments provided by the boot loader will be | |
1923 | appended to the default kernel command string. | |
1924 | ||
92d2040d AH |
1925 | config CMDLINE_FORCE |
1926 | bool "Always use the default kernel command string" | |
92d2040d AH |
1927 | help |
1928 | Always use the default kernel command string, even if the boot | |
1929 | loader passes other arguments to the kernel. | |
1930 | This is useful if you cannot or don't want to change the | |
1931 | command-line options your boot loader passes to the kernel. | |
4394c124 | 1932 | endchoice |
92d2040d | 1933 | |
1da177e4 LT |
1934 | config XIP_KERNEL |
1935 | bool "Kernel Execute-In-Place from ROM" | |
10968131 | 1936 | depends on !ARM_LPAE && !ARCH_MULTIPLATFORM |
1da177e4 LT |
1937 | help |
1938 | Execute-In-Place allows the kernel to run from non-volatile storage | |
1939 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
1940 | space since the text section of the kernel is not loaded from flash | |
1941 | to RAM. Read-write sections, such as the data section and stack, | |
1942 | are still copied to RAM. The XIP kernel is not compressed since | |
1943 | it has to run directly from flash, so it will take more space to | |
1944 | store it. The flash address used to link the kernel object files, | |
1945 | and for storing it, is configuration dependent. Therefore, if you | |
1946 | say Y here, you must know the proper physical address where to | |
1947 | store the kernel image depending on your own flash memory usage. | |
1948 | ||
1949 | Also note that the make target becomes "make xipImage" rather than | |
1950 | "make zImage" or "make Image". The final kernel binary to put in | |
1951 | ROM memory will be arch/arm/boot/xipImage. | |
1952 | ||
1953 | If unsure, say N. | |
1954 | ||
1955 | config XIP_PHYS_ADDR | |
1956 | hex "XIP Kernel Physical Location" | |
1957 | depends on XIP_KERNEL | |
1958 | default "0x00080000" | |
1959 | help | |
1960 | This is the physical address in your flash memory the kernel will | |
1961 | be linked for and stored to. This address is dependent on your | |
1962 | own flash usage. | |
1963 | ||
ca8b5d97 NP |
1964 | config XIP_DEFLATED_DATA |
1965 | bool "Store kernel .data section compressed in ROM" | |
1966 | depends on XIP_KERNEL | |
1967 | select ZLIB_INFLATE | |
1968 | help | |
1969 | Before the kernel is actually executed, its .data section has to be | |
1970 | copied to RAM from ROM. This option allows for storing that data | |
1971 | in compressed form and decompressed to RAM rather than merely being | |
1972 | copied, saving some precious ROM space. A possible drawback is a | |
1973 | slightly longer boot delay. | |
1974 | ||
c587e4a6 RP |
1975 | config KEXEC |
1976 | bool "Kexec system call (EXPERIMENTAL)" | |
19ab428f | 1977 | depends on (!SMP || PM_SLEEP_SMP) |
cb1293e2 | 1978 | depends on !CPU_V7M |
2965faa5 | 1979 | select KEXEC_CORE |
c587e4a6 RP |
1980 | help |
1981 | kexec is a system call that implements the ability to shutdown your | |
1982 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 1983 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
1984 | you can start any kernel with it, not just Linux. |
1985 | ||
1986 | It is an ongoing process to be certain the hardware in a machine | |
1987 | is properly shutdown, so do not be surprised if this code does not | |
bf220695 | 1988 | initially work for you. |
c587e4a6 | 1989 | |
4cd9d6f7 RP |
1990 | config ATAGS_PROC |
1991 | bool "Export atags in procfs" | |
bd51e2f5 | 1992 | depends on ATAGS && KEXEC |
b98d7291 | 1993 | default y |
4cd9d6f7 RP |
1994 | help |
1995 | Should the atags used to boot the kernel be exported in an "atags" | |
1996 | file in procfs. Useful with kexec. | |
1997 | ||
cb5d39b3 MW |
1998 | config CRASH_DUMP |
1999 | bool "Build kdump crash kernel (EXPERIMENTAL)" | |
cb5d39b3 MW |
2000 | help |
2001 | Generate crash dump after being started by kexec. This should | |
2002 | be normally only set in special crash dump kernels which are | |
2003 | loaded in the main kernel with kexec-tools into a specially | |
2004 | reserved region and then later executed after a crash by | |
2005 | kdump/kexec. The crash dump kernel must be compiled to a | |
2006 | memory address not used by the main kernel | |
2007 | ||
2008 | For more details see Documentation/kdump/kdump.txt | |
2009 | ||
e69edc79 EM |
2010 | config AUTO_ZRELADDR |
2011 | bool "Auto calculation of the decompressed kernel image address" | |
e69edc79 EM |
2012 | help |
2013 | ZRELADDR is the physical address where the decompressed kernel | |
2014 | image will be placed. If AUTO_ZRELADDR is selected, the address | |
2015 | will be determined at run-time by masking the current IP with | |
2016 | 0xf8000000. This assumes the zImage being placed in the first 128MB | |
2017 | from start of memory. | |
2018 | ||
81a0bc39 RF |
2019 | config EFI_STUB |
2020 | bool | |
2021 | ||
2022 | config EFI | |
2023 | bool "UEFI runtime support" | |
2024 | depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL | |
2025 | select UCS2_STRING | |
2026 | select EFI_PARAMS_FROM_FDT | |
2027 | select EFI_STUB | |
2028 | select EFI_ARMSTUB | |
2029 | select EFI_RUNTIME_WRAPPERS | |
2030 | ---help--- | |
2031 | This option provides support for runtime services provided | |
2032 | by UEFI firmware (such as non-volatile variables, realtime | |
2033 | clock, and platform reset). A UEFI stub is also provided to | |
2034 | allow the kernel to be booted as an EFI application. This | |
2035 | is only useful for kernels that may run on systems that have | |
2036 | UEFI firmware. | |
2037 | ||
bb817bef AB |
2038 | config DMI |
2039 | bool "Enable support for SMBIOS (DMI) tables" | |
2040 | depends on EFI | |
2041 | default y | |
2042 | help | |
2043 | This enables SMBIOS/DMI feature for systems. | |
2044 | ||
2045 | This option is only useful on systems that have UEFI firmware. | |
2046 | However, even with this option, the resultant kernel should | |
2047 | continue to boot on existing non-UEFI platforms. | |
2048 | ||
2049 | NOTE: This does *NOT* enable or encourage the use of DMI quirks, | |
2050 | i.e., the the practice of identifying the platform via DMI to | |
2051 | decide whether certain workarounds for buggy hardware and/or | |
2052 | firmware need to be enabled. This would require the DMI subsystem | |
2053 | to be enabled much earlier than we do on ARM, which is non-trivial. | |
2054 | ||
1da177e4 LT |
2055 | endmenu |
2056 | ||
ac9d7efc | 2057 | menu "CPU Power Management" |
1da177e4 | 2058 | |
1da177e4 | 2059 | source "drivers/cpufreq/Kconfig" |
1da177e4 | 2060 | |
ac9d7efc RK |
2061 | source "drivers/cpuidle/Kconfig" |
2062 | ||
2063 | endmenu | |
2064 | ||
1da177e4 LT |
2065 | menu "Floating point emulation" |
2066 | ||
2067 | comment "At least one emulation must be selected" | |
2068 | ||
2069 | config FPE_NWFPE | |
2070 | bool "NWFPE math emulation" | |
593c252a | 2071 | depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL |
1da177e4 LT |
2072 | ---help--- |
2073 | Say Y to include the NWFPE floating point emulator in the kernel. | |
2074 | This is necessary to run most binaries. Linux does not currently | |
2075 | support floating point hardware so you need to say Y here even if | |
2076 | your machine has an FPA or floating point co-processor podule. | |
2077 | ||
2078 | You may say N here if you are going to load the Acorn FPEmulator | |
2079 | early in the bootup. | |
2080 | ||
2081 | config FPE_NWFPE_XP | |
2082 | bool "Support extended precision" | |
bedf142b | 2083 | depends on FPE_NWFPE |
1da177e4 LT |
2084 | help |
2085 | Say Y to include 80-bit support in the kernel floating-point | |
2086 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
2087 | Note that gcc does not generate 80-bit operations by default, | |
2088 | so in most cases this option only enlarges the size of the | |
2089 | floating point emulator without any good reason. | |
2090 | ||
2091 | You almost surely want to say N here. | |
2092 | ||
2093 | config FPE_FASTFPE | |
2094 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
d6f94fa0 | 2095 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 |
1da177e4 LT |
2096 | ---help--- |
2097 | Say Y here to include the FAST floating point emulator in the kernel. | |
2098 | This is an experimental much faster emulator which now also has full | |
2099 | precision for the mantissa. It does not support any exceptions. | |
2100 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
2101 | ||
2102 | It should be sufficient for most programs. It may be not suitable | |
2103 | for scientific calculations, but you have to check this for yourself. | |
2104 | If you do not feel you need a faster FP emulation you should better | |
2105 | choose NWFPE. | |
2106 | ||
2107 | config VFP | |
2108 | bool "VFP-format floating point maths" | |
e399b1a4 | 2109 | depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
2110 | help |
2111 | Say Y to include VFP support code in the kernel. This is needed | |
2112 | if your hardware includes a VFP unit. | |
2113 | ||
2114 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
2115 | release notes and additional status information. | |
2116 | ||
2117 | Say N if your target does not have VFP hardware. | |
2118 | ||
25ebee02 CM |
2119 | config VFPv3 |
2120 | bool | |
2121 | depends on VFP | |
2122 | default y if CPU_V7 | |
2123 | ||
b5872db4 CM |
2124 | config NEON |
2125 | bool "Advanced SIMD (NEON) Extension support" | |
2126 | depends on VFPv3 && CPU_V7 | |
2127 | help | |
2128 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
2129 | Extension. | |
2130 | ||
73c132c1 AB |
2131 | config KERNEL_MODE_NEON |
2132 | bool "Support for NEON in kernel mode" | |
c4a30c3b | 2133 | depends on NEON && AEABI |
73c132c1 AB |
2134 | help |
2135 | Say Y to include support for NEON in kernel mode. | |
2136 | ||
1da177e4 LT |
2137 | endmenu |
2138 | ||
1da177e4 LT |
2139 | menu "Power management options" |
2140 | ||
eceab4ac | 2141 | source "kernel/power/Kconfig" |
1da177e4 | 2142 | |
f4cb5700 | 2143 | config ARCH_SUSPEND_POSSIBLE |
19a0519d | 2144 | depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ |
f0d75153 | 2145 | CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK |
f4cb5700 JB |
2146 | def_bool y |
2147 | ||
15e0d9e3 | 2148 | config ARM_CPU_SUSPEND |
8b6f2499 | 2149 | def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW |
1b9bdf5c | 2150 | depends on ARCH_SUSPEND_POSSIBLE |
15e0d9e3 | 2151 | |
603fb42a SC |
2152 | config ARCH_HIBERNATION_POSSIBLE |
2153 | bool | |
2154 | depends on MMU | |
2155 | default y if ARCH_SUSPEND_POSSIBLE | |
2156 | ||
1da177e4 LT |
2157 | endmenu |
2158 | ||
916f743d KG |
2159 | source "drivers/firmware/Kconfig" |
2160 | ||
652ccae5 AB |
2161 | if CRYPTO |
2162 | source "arch/arm/crypto/Kconfig" | |
2163 | endif | |
1da177e4 | 2164 | |
749cf76c | 2165 | source "arch/arm/kvm/Kconfig" |