Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # For a description of the syntax of this configuration file, | |
3 | # see Documentation/kbuild/kconfig-language.txt. | |
4 | # | |
5 | ||
6 | mainmenu "Linux Kernel Configuration" | |
7 | ||
8 | config ARM | |
9 | bool | |
10 | default y | |
2064c946 | 11 | select HAVE_IDE |
12b824fb | 12 | select RTC_LIB |
75e7153a | 13 | select SYS_SUPPORTS_APM_EMULATION |
42d4b839 | 14 | select HAVE_OPROFILE |
3f550096 | 15 | select HAVE_KPROBES if (!XIP_KERNEL) |
9edddaa2 | 16 | select HAVE_KRETPROBES if (HAVE_KPROBES) |
014c257c AS |
17 | select HAVE_FTRACE if (!XIP_KERNEL) |
18 | select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE) | |
1da177e4 LT |
19 | help |
20 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 21 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 22 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 23 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
24 | Europe. There is an ARM Linux project with a web page at |
25 | <http://www.arm.linux.org.uk/>. | |
26 | ||
1a189b97 RK |
27 | config HAVE_PWM |
28 | bool | |
29 | ||
75e7153a RB |
30 | config SYS_SUPPORTS_APM_EMULATION |
31 | bool | |
32 | ||
0a938b97 DB |
33 | config GENERIC_GPIO |
34 | bool | |
35 | default n | |
36 | ||
746140c7 KH |
37 | config GENERIC_TIME |
38 | bool | |
39 | default n | |
40 | ||
0567a0c0 KH |
41 | config GENERIC_CLOCKEVENTS |
42 | bool | |
43 | default n | |
44 | ||
a8655e83 CM |
45 | config GENERIC_CLOCKEVENTS_BROADCAST |
46 | bool | |
47 | depends on GENERIC_CLOCKEVENTS | |
48 | default y if SMP && !LOCAL_TIMERS | |
49 | ||
1da177e4 LT |
50 | config MMU |
51 | bool | |
52 | default y | |
53 | ||
5ea81769 AV |
54 | config NO_IOPORT |
55 | bool | |
56 | default n | |
57 | ||
1da177e4 LT |
58 | config EISA |
59 | bool | |
60 | ---help--- | |
61 | The Extended Industry Standard Architecture (EISA) bus was | |
62 | developed as an open alternative to the IBM MicroChannel bus. | |
63 | ||
64 | The EISA bus provided some of the features of the IBM MicroChannel | |
65 | bus while maintaining backward compatibility with cards made for | |
66 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
67 | 1995 when it was made obsolete by the PCI bus. | |
68 | ||
69 | Say Y here if you are building a kernel for an EISA-based machine. | |
70 | ||
71 | Otherwise, say N. | |
72 | ||
73 | config SBUS | |
74 | bool | |
75 | ||
76 | config MCA | |
77 | bool | |
78 | help | |
79 | MicroChannel Architecture is found in some IBM PS/2 machines and | |
80 | laptops. It is a bus system similar to PCI or ISA. See | |
81 | <file:Documentation/mca.txt> (and especially the web page given | |
82 | there) before attempting to build an MCA bus kernel. | |
83 | ||
4a2581a0 TG |
84 | config GENERIC_HARDIRQS |
85 | bool | |
86 | default y | |
87 | ||
f16fb1ec RK |
88 | config STACKTRACE_SUPPORT |
89 | bool | |
90 | default y | |
91 | ||
f76e9154 NP |
92 | config HAVE_LATENCYTOP_SUPPORT |
93 | bool | |
94 | depends on !SMP | |
95 | default y | |
96 | ||
f16fb1ec RK |
97 | config LOCKDEP_SUPPORT |
98 | bool | |
99 | default y | |
100 | ||
7ad1bcb2 RK |
101 | config TRACE_IRQFLAGS_SUPPORT |
102 | bool | |
103 | default y | |
104 | ||
4a2581a0 TG |
105 | config HARDIRQS_SW_RESEND |
106 | bool | |
107 | default y | |
108 | ||
109 | config GENERIC_IRQ_PROBE | |
110 | bool | |
111 | default y | |
112 | ||
95c354fe NP |
113 | config GENERIC_LOCKBREAK |
114 | bool | |
115 | default y | |
116 | depends on SMP && PREEMPT | |
117 | ||
1da177e4 LT |
118 | config RWSEM_GENERIC_SPINLOCK |
119 | bool | |
120 | default y | |
121 | ||
122 | config RWSEM_XCHGADD_ALGORITHM | |
123 | bool | |
124 | ||
f0d1b0b3 DH |
125 | config ARCH_HAS_ILOG2_U32 |
126 | bool | |
127 | default n | |
128 | ||
129 | config ARCH_HAS_ILOG2_U64 | |
130 | bool | |
131 | default n | |
132 | ||
b89c3b16 AM |
133 | config GENERIC_HWEIGHT |
134 | bool | |
135 | default y | |
136 | ||
1da177e4 LT |
137 | config GENERIC_CALIBRATE_DELAY |
138 | bool | |
139 | default y | |
140 | ||
b0b933c0 DH |
141 | config ARCH_SUPPORTS_AOUT |
142 | def_bool y | |
143 | ||
a08b6b79 Z |
144 | config ARCH_MAY_HAVE_PC_FDC |
145 | bool | |
146 | ||
5ac6da66 CL |
147 | config ZONE_DMA |
148 | bool | |
149 | default y | |
150 | ||
1da177e4 LT |
151 | config GENERIC_ISA_DMA |
152 | bool | |
153 | ||
1da177e4 LT |
154 | config FIQ |
155 | bool | |
156 | ||
034d2f5a AV |
157 | config ARCH_MTD_XIP |
158 | bool | |
159 | ||
60a752ef PZ |
160 | config GENERIC_HARDIRQS_NO__DO_IRQ |
161 | bool | |
162 | def_bool y | |
163 | ||
c0ffa3a9 MD |
164 | if OPROFILE |
165 | ||
166 | config OPROFILE_ARMV6 | |
167 | def_bool y | |
168 | depends on CPU_V6 && !SMP | |
169 | select OPROFILE_ARM11_CORE | |
170 | ||
171 | config OPROFILE_MPCORE | |
172 | def_bool y | |
173 | depends on CPU_V6 && SMP | |
174 | select OPROFILE_ARM11_CORE | |
175 | ||
176 | config OPROFILE_ARM11_CORE | |
177 | bool | |
178 | ||
179 | endif | |
180 | ||
c760fc19 HC |
181 | config VECTORS_BASE |
182 | hex | |
6afd6fae | 183 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
184 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
185 | default 0x00000000 | |
186 | help | |
187 | The base address of exception vectors. | |
188 | ||
1da177e4 LT |
189 | source "init/Kconfig" |
190 | ||
191 | menu "System Type" | |
192 | ||
193 | choice | |
194 | prompt "ARM system type" | |
6a0e2430 | 195 | default ARCH_VERSATILE |
1da177e4 | 196 | |
4af6fee1 DS |
197 | config ARCH_AAEC2000 |
198 | bool "Agilent AAEC-2000 based" | |
199 | select ARM_AMBA | |
200 | help | |
201 | This enables support for systems based on the Agilent AAEC-2000 | |
202 | ||
203 | config ARCH_INTEGRATOR | |
204 | bool "ARM Ltd. Integrator family" | |
205 | select ARM_AMBA | |
206 | select ICST525 | |
207 | help | |
208 | Support for ARM's Integrator platform. | |
209 | ||
210 | config ARCH_REALVIEW | |
211 | bool "ARM Ltd. RealView family" | |
212 | select ARM_AMBA | |
213 | select ICST307 | |
85802afe | 214 | select GENERIC_TIME |
ae30ceac | 215 | select GENERIC_CLOCKEVENTS |
4af6fee1 DS |
216 | help |
217 | This enables support for ARM Ltd RealView boards. | |
218 | ||
219 | config ARCH_VERSATILE | |
220 | bool "ARM Ltd. Versatile family" | |
221 | select ARM_AMBA | |
222 | select ARM_VIC | |
223 | select ICST307 | |
b49c87c2 | 224 | select GENERIC_TIME |
89df1272 | 225 | select GENERIC_CLOCKEVENTS |
4af6fee1 DS |
226 | help |
227 | This enables support for ARM Ltd Versatile board. | |
228 | ||
8fc5ffa0 AV |
229 | config ARCH_AT91 |
230 | bool "Atmel AT91" | |
0a938b97 | 231 | select GENERIC_GPIO |
4af6fee1 | 232 | help |
2b3b3516 AV |
233 | This enables support for systems based on the Atmel AT91RM9200, |
234 | AT91SAM9 and AT91CAP9 processors. | |
4af6fee1 | 235 | |
1da177e4 | 236 | config ARCH_CLPS7500 |
4af6fee1 | 237 | bool "Cirrus CL-PS7500FE" |
1da177e4 | 238 | select TIMER_ACORN |
f7e68bbf | 239 | select ISA |
e4169889 | 240 | select NO_IOPORT |
f999b8bd MM |
241 | help |
242 | Support for the Cirrus Logic PS7500FE system-on-a-chip. | |
1da177e4 LT |
243 | |
244 | config ARCH_CLPS711X | |
4af6fee1 | 245 | bool "Cirrus Logic CLPS711x/EP721x-based" |
f999b8bd MM |
246 | help |
247 | Support for Cirrus Logic 711x/721x based boards. | |
1da177e4 | 248 | |
1da177e4 LT |
249 | config ARCH_EBSA110 |
250 | bool "EBSA-110" | |
f7e68bbf | 251 | select ISA |
c5eb2a2b | 252 | select NO_IOPORT |
1da177e4 LT |
253 | help |
254 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 255 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
256 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
257 | parallel port. | |
258 | ||
e7736d47 LB |
259 | config ARCH_EP93XX |
260 | bool "EP93xx-based" | |
261 | select ARM_AMBA | |
262 | select ARM_VIC | |
4e9f9fd5 | 263 | select GENERIC_GPIO |
b685004f | 264 | select HAVE_GPIO_LIB |
e7736d47 LB |
265 | help |
266 | This enables support for the Cirrus EP93xx series of CPUs. | |
267 | ||
1da177e4 LT |
268 | config ARCH_FOOTBRIDGE |
269 | bool "FootBridge" | |
270 | select FOOTBRIDGE | |
f999b8bd MM |
271 | help |
272 | Support for systems based on the DC21285 companion chip | |
273 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 274 | |
4af6fee1 DS |
275 | config ARCH_NETX |
276 | bool "Hilscher NetX based" | |
277 | select ARM_VIC | |
f999b8bd | 278 | help |
4af6fee1 DS |
279 | This enables support for systems based on the Hilscher NetX Soc |
280 | ||
281 | config ARCH_H720X | |
282 | bool "Hynix HMS720x-based" | |
283 | select ISA_DMA_API | |
284 | help | |
285 | This enables support for systems based on the Hynix HMS720x | |
286 | ||
287 | config ARCH_IMX | |
288 | bool "IMX" | |
b3e6a508 | 289 | select GENERIC_GPIO |
89bba435 PP |
290 | select GENERIC_TIME |
291 | select GENERIC_CLOCKEVENTS | |
4af6fee1 DS |
292 | help |
293 | Support for Motorola's i.MX family of processors (MX1, MXL). | |
1da177e4 | 294 | |
3b938be6 RK |
295 | config ARCH_IOP13XX |
296 | bool "IOP13xx-based" | |
297 | depends on MMU | |
298 | select PLAT_IOP | |
299 | select PCI | |
300 | select ARCH_SUPPORTS_MSI | |
301 | help | |
302 | Support for Intel's IOP13XX (XScale) family of processors. | |
303 | ||
3f7e5815 LB |
304 | config ARCH_IOP32X |
305 | bool "IOP32x-based" | |
a4f7e763 | 306 | depends on MMU |
7ae1f7ec | 307 | select PLAT_IOP |
f7e68bbf | 308 | select PCI |
63f385cd AP |
309 | select GENERIC_GPIO |
310 | select HAVE_GPIO_LIB | |
f999b8bd | 311 | help |
3f7e5815 LB |
312 | Support for Intel's 80219 and IOP32X (XScale) family of |
313 | processors. | |
314 | ||
315 | config ARCH_IOP33X | |
316 | bool "IOP33x-based" | |
317 | depends on MMU | |
7ae1f7ec | 318 | select PLAT_IOP |
3f7e5815 | 319 | select PCI |
63f385cd AP |
320 | select GENERIC_GPIO |
321 | select HAVE_GPIO_LIB | |
3f7e5815 LB |
322 | help |
323 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 324 | |
3b938be6 RK |
325 | config ARCH_IXP23XX |
326 | bool "IXP23XX-based" | |
a4f7e763 | 327 | depends on MMU |
3b938be6 | 328 | select PCI |
f999b8bd | 329 | help |
3b938be6 | 330 | Support for Intel's IXP23xx (XScale) family of processors. |
1da177e4 LT |
331 | |
332 | config ARCH_IXP2000 | |
333 | bool "IXP2400/2800-based" | |
a4f7e763 | 334 | depends on MMU |
f7e68bbf | 335 | select PCI |
f999b8bd MM |
336 | help |
337 | Support for Intel's IXP2400/2800 (XScale) family of processors. | |
1da177e4 | 338 | |
3b938be6 RK |
339 | config ARCH_IXP4XX |
340 | bool "IXP4xx-based" | |
a4f7e763 | 341 | depends on MMU |
8858e9af | 342 | select GENERIC_GPIO |
3b938be6 RK |
343 | select GENERIC_TIME |
344 | select GENERIC_CLOCKEVENTS | |
c4713074 | 345 | help |
3b938be6 | 346 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 347 | |
1da177e4 LT |
348 | config ARCH_L7200 |
349 | bool "LinkUp-L7200" | |
350 | select FIQ | |
351 | help | |
352 | Say Y here if you intend to run this kernel on a LinkUp Systems | |
353 | L7200 Software Development Board which uses an ARM720T processor. | |
354 | Information on this board can be obtained at: | |
355 | ||
356 | <http://www.linkupsys.com/> | |
357 | ||
358 | If you have any questions or comments about the Linux kernel port | |
359 | to this board, send e-mail to <sjhill@cotw.com>. | |
360 | ||
651c74c7 SB |
361 | config ARCH_KIRKWOOD |
362 | bool "Marvell Kirkwood" | |
363 | select PCI | |
364 | select GENERIC_TIME | |
365 | select GENERIC_CLOCKEVENTS | |
366 | select PLAT_ORION | |
367 | help | |
368 | Support for the following Marvell Kirkwood series SoCs: | |
369 | 88F6180, 88F6192 and 88F6281. | |
370 | ||
c53c9cf6 AV |
371 | config ARCH_KS8695 |
372 | bool "Micrel/Kendin KS8695" | |
8a87a996 | 373 | select GENERIC_GPIO |
c53c9cf6 AV |
374 | help |
375 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
376 | System-on-Chip devices. | |
377 | ||
9918cda5 UKK |
378 | config ARCH_NS9XXX |
379 | bool "NetSilicon NS9xxx" | |
689f2a01 | 380 | select GENERIC_GPIO |
cef5975d | 381 | select GENERIC_TIME |
c0bb87f7 | 382 | select GENERIC_CLOCKEVENTS |
9918cda5 UKK |
383 | help |
384 | Say Y here if you intend to run this kernel on a NetSilicon NS9xxx | |
385 | System. | |
386 | ||
387 | <http://www.digi.com/products/microprocessors/index.jsp> | |
388 | ||
777f9beb LB |
389 | config ARCH_LOKI |
390 | bool "Marvell Loki (88RC8480)" | |
391 | select GENERIC_TIME | |
392 | select GENERIC_CLOCKEVENTS | |
393 | select PLAT_ORION | |
394 | help | |
395 | Support for the Marvell Loki (88RC8480) SoC. | |
396 | ||
794d15b2 SS |
397 | config ARCH_MV78XX0 |
398 | bool "Marvell MV78xx0" | |
399 | select PCI | |
400 | select GENERIC_TIME | |
401 | select GENERIC_CLOCKEVENTS | |
402 | select PLAT_ORION | |
403 | help | |
404 | Support for the following Marvell MV78xx0 series SoCs: | |
405 | MV781x0, MV782x0. | |
406 | ||
52c543f9 QJ |
407 | config ARCH_MXC |
408 | bool "Freescale MXC/iMX-based" | |
d0f349fb JB |
409 | select GENERIC_TIME |
410 | select GENERIC_CLOCKEVENTS | |
52c543f9 | 411 | select ARCH_MTD_XIP |
07bd1a6c JB |
412 | select GENERIC_GPIO |
413 | select HAVE_GPIO_LIB | |
52c543f9 QJ |
414 | help |
415 | Support for Freescale MXC/iMX-based family of processors | |
416 | ||
9dd0b194 | 417 | config ARCH_ORION5X |
585cf175 TP |
418 | bool "Marvell Orion" |
419 | depends on MMU | |
038ee083 | 420 | select PCI |
01af72e4 | 421 | select GENERIC_GPIO |
51cbff1d TP |
422 | select GENERIC_TIME |
423 | select GENERIC_CLOCKEVENTS | |
69b02f6a | 424 | select PLAT_ORION |
585cf175 | 425 | help |
9dd0b194 | 426 | Support for the following Marvell Orion 5x series SoCs: |
d2b2a6bb LB |
427 | Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), |
428 | Orion-2 (5281). | |
585cf175 | 429 | |
4af6fee1 DS |
430 | config ARCH_PNX4008 |
431 | bool "Philips Nexperia PNX4008 Mobile" | |
432 | help | |
433 | This enables support for Philips PNX4008 mobile platform. | |
434 | ||
1da177e4 | 435 | config ARCH_PXA |
2c8086a5 | 436 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 437 | depends on MMU |
034d2f5a | 438 | select ARCH_MTD_XIP |
0a938b97 | 439 | select GENERIC_GPIO |
1c44f5f1 | 440 | select HAVE_GPIO_LIB |
45cf5eef | 441 | select GENERIC_TIME |
981d0f39 | 442 | select GENERIC_CLOCKEVENTS |
a88264c2 | 443 | select TICK_ONESHOT |
f999b8bd | 444 | help |
2c8086a5 | 445 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 LT |
446 | |
447 | config ARCH_RPC | |
448 | bool "RiscPC" | |
449 | select ARCH_ACORN | |
450 | select FIQ | |
451 | select TIMER_ACORN | |
a08b6b79 | 452 | select ARCH_MAY_HAVE_PC_FDC |
341eb781 | 453 | select HAVE_PATA_PLATFORM |
065909b9 | 454 | select ISA_DMA_API |
5ea81769 | 455 | select NO_IOPORT |
1da177e4 LT |
456 | help |
457 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
458 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
459 | ||
460 | config ARCH_SA1100 | |
461 | bool "SA1100-based" | |
f7e68bbf | 462 | select ISA |
3cd9e19e | 463 | select ARCH_DISCONTIGMEM_ENABLE |
05944d74 RK |
464 | select ARCH_SPARSEMEM_ENABLE |
465 | select ARCH_SELECT_MEMORY_MODEL | |
034d2f5a | 466 | select ARCH_MTD_XIP |
0a938b97 | 467 | select GENERIC_GPIO |
d142b6e7 | 468 | select GENERIC_TIME |
3e238be2 RK |
469 | select GENERIC_CLOCKEVENTS |
470 | select TICK_ONESHOT | |
45528e38 | 471 | select HAVE_GPIO_LIB |
f999b8bd MM |
472 | help |
473 | Support for StrongARM 11x0 based boards. | |
1da177e4 LT |
474 | |
475 | config ARCH_S3C2410 | |
e4d06e39 | 476 | bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" |
0a938b97 | 477 | select GENERIC_GPIO |
1da177e4 LT |
478 | help |
479 | Samsung S3C2410X CPU based systems, such as the Simtec Electronics | |
480 | BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or | |
f6c8965a | 481 | the Samsung SMDK2410 development board (and derivatives). |
1da177e4 LT |
482 | |
483 | config ARCH_SHARK | |
484 | bool "Shark" | |
f7e68bbf RK |
485 | select ISA |
486 | select ISA_DMA | |
487 | select PCI | |
f999b8bd MM |
488 | help |
489 | Support for the StrongARM based Digital DNARD machine, also known | |
490 | as "Shark" (<http://www.shark-linux.de/shark.html>). | |
1da177e4 LT |
491 | |
492 | config ARCH_LH7A40X | |
493 | bool "Sharp LH7A40X" | |
494 | help | |
495 | Say Y here for systems based on one of the Sharp LH7A40X | |
496 | System on a Chip processors. These CPUs include an ARM922T | |
497 | core with a wide array of integrated devices for | |
498 | hand-held and low-power applications. | |
499 | ||
7c6337e2 KH |
500 | config ARCH_DAVINCI |
501 | bool "TI DaVinci" | |
502 | select GENERIC_TIME | |
503 | select GENERIC_CLOCKEVENTS | |
3d9edf09 | 504 | select GENERIC_GPIO |
7c6337e2 KH |
505 | help |
506 | Support for TI's DaVinci platform. | |
507 | ||
3b938be6 RK |
508 | config ARCH_OMAP |
509 | bool "TI OMAP" | |
510 | select GENERIC_GPIO | |
52e31344 | 511 | select HAVE_GPIO_LIB |
3b938be6 | 512 | select GENERIC_TIME |
06cad098 | 513 | select GENERIC_CLOCKEVENTS |
3b938be6 RK |
514 | help |
515 | Support for TI's OMAP platform (OMAP1 and OMAP2). | |
516 | ||
3042102a BS |
517 | config ARCH_MSM7X00A |
518 | bool "Qualcomm MSM7X00A" | |
519 | select GENERIC_TIME | |
520 | select GENERIC_CLOCKEVENTS | |
521 | help | |
522 | Support for Qualcomm MSM7X00A based systems. This runs on the ARM11 | |
523 | apps processor of the MSM7X00A and depends on a shared memory | |
524 | interface to the ARM9 modem processor which runs the baseband stack | |
525 | and controls some vital subsystems (clock and power control, etc). | |
526 | <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp> | |
527 | ||
1da177e4 LT |
528 | endchoice |
529 | ||
530 | source "arch/arm/mach-clps711x/Kconfig" | |
531 | ||
e7736d47 LB |
532 | source "arch/arm/mach-ep93xx/Kconfig" |
533 | ||
1da177e4 LT |
534 | source "arch/arm/mach-footbridge/Kconfig" |
535 | ||
536 | source "arch/arm/mach-integrator/Kconfig" | |
537 | ||
3f7e5815 LB |
538 | source "arch/arm/mach-iop32x/Kconfig" |
539 | ||
540 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 541 | |
285f5fa7 DW |
542 | source "arch/arm/mach-iop13xx/Kconfig" |
543 | ||
1da177e4 LT |
544 | source "arch/arm/mach-ixp4xx/Kconfig" |
545 | ||
546 | source "arch/arm/mach-ixp2000/Kconfig" | |
547 | ||
c4713074 LB |
548 | source "arch/arm/mach-ixp23xx/Kconfig" |
549 | ||
777f9beb LB |
550 | source "arch/arm/mach-loki/Kconfig" |
551 | ||
794d15b2 SS |
552 | source "arch/arm/mach-mv78xx0/Kconfig" |
553 | ||
1da177e4 LT |
554 | source "arch/arm/mach-pxa/Kconfig" |
555 | ||
556 | source "arch/arm/mach-sa1100/Kconfig" | |
557 | ||
d48af15e TL |
558 | source "arch/arm/plat-omap/Kconfig" |
559 | ||
560 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 561 | |
1dbae815 TL |
562 | source "arch/arm/mach-omap2/Kconfig" |
563 | ||
9dd0b194 | 564 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 565 | |
651c74c7 | 566 | source "arch/arm/mach-kirkwood/Kconfig" |
585cf175 | 567 | |
a21765a7 | 568 | source "arch/arm/plat-s3c24xx/Kconfig" |
d58153d8 | 569 | source "arch/arm/plat-s3c/Kconfig" |
a21765a7 BD |
570 | |
571 | if ARCH_S3C2410 | |
572 | source "arch/arm/mach-s3c2400/Kconfig" | |
1da177e4 | 573 | source "arch/arm/mach-s3c2410/Kconfig" |
a21765a7 BD |
574 | source "arch/arm/mach-s3c2412/Kconfig" |
575 | source "arch/arm/mach-s3c2440/Kconfig" | |
576 | source "arch/arm/mach-s3c2442/Kconfig" | |
e4d06e39 | 577 | source "arch/arm/mach-s3c2443/Kconfig" |
a21765a7 | 578 | endif |
1da177e4 LT |
579 | |
580 | source "arch/arm/mach-lh7a40x/Kconfig" | |
581 | ||
582 | source "arch/arm/mach-imx/Kconfig" | |
583 | ||
584 | source "arch/arm/mach-h720x/Kconfig" | |
585 | ||
586 | source "arch/arm/mach-versatile/Kconfig" | |
587 | ||
038c5b60 BN |
588 | source "arch/arm/mach-aaec2000/Kconfig" |
589 | ||
8ad68bbf CM |
590 | source "arch/arm/mach-realview/Kconfig" |
591 | ||
9d041268 | 592 | source "arch/arm/mach-at91/Kconfig" |
73a59c1c | 593 | |
52c543f9 QJ |
594 | source "arch/arm/plat-mxc/Kconfig" |
595 | ||
bb6d8c88 SH |
596 | source "arch/arm/mach-netx/Kconfig" |
597 | ||
9918cda5 UKK |
598 | source "arch/arm/mach-ns9xxx/Kconfig" |
599 | ||
7c6337e2 KH |
600 | source "arch/arm/mach-davinci/Kconfig" |
601 | ||
c53c9cf6 AV |
602 | source "arch/arm/mach-ks8695/Kconfig" |
603 | ||
9e73c84c BS |
604 | source "arch/arm/mach-msm/Kconfig" |
605 | ||
1da177e4 LT |
606 | # Definitions to make life easier |
607 | config ARCH_ACORN | |
608 | bool | |
609 | ||
7ae1f7ec LB |
610 | config PLAT_IOP |
611 | bool | |
612 | ||
69b02f6a LB |
613 | config PLAT_ORION |
614 | bool | |
615 | ||
1da177e4 LT |
616 | source arch/arm/mm/Kconfig |
617 | ||
afe4b25e LB |
618 | config IWMMXT |
619 | bool "Enable iWMMXt support" | |
6340aa61 | 620 | depends on CPU_XSCALE || CPU_XSC3 |
2c8086a5 | 621 | default y if PXA27x || PXA3xx |
afe4b25e LB |
622 | help |
623 | Enable support for iWMMXt context switching at run time if | |
624 | running on a CPU that supports it. | |
625 | ||
1da177e4 LT |
626 | # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER |
627 | config XSCALE_PMU | |
628 | bool | |
629 | depends on CPU_XSCALE && !XSCALE_PMU_TIMER | |
630 | default y | |
631 | ||
3b93e7b0 HC |
632 | if !MMU |
633 | source "arch/arm/Kconfig-nommu" | |
634 | endif | |
635 | ||
1da177e4 LT |
636 | endmenu |
637 | ||
638 | source "arch/arm/common/Kconfig" | |
639 | ||
640 | config FORCE_MAX_ZONEORDER | |
641 | int | |
642 | depends on SA1111 | |
643 | default "9" | |
644 | ||
645 | menu "Bus support" | |
646 | ||
647 | config ARM_AMBA | |
648 | bool | |
649 | ||
650 | config ISA | |
651 | bool | |
1da177e4 LT |
652 | help |
653 | Find out whether you have ISA slots on your motherboard. ISA is the | |
654 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
655 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
656 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
657 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
658 | ||
065909b9 | 659 | # Select ISA DMA controller support |
1da177e4 LT |
660 | config ISA_DMA |
661 | bool | |
065909b9 | 662 | select ISA_DMA_API |
1da177e4 | 663 | |
065909b9 | 664 | # Select ISA DMA interface |
5cae841b AV |
665 | config ISA_DMA_API |
666 | bool | |
5cae841b | 667 | |
1da177e4 | 668 | config PCI |
a0113a99 | 669 | bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE |
1da177e4 LT |
670 | help |
671 | Find out whether you have a PCI motherboard. PCI is the name of a | |
672 | bus system, i.e. the way the CPU talks to the other stuff inside | |
673 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
674 | VESA. If you have PCI, say Y, otherwise N. | |
675 | ||
36e23590 MW |
676 | config PCI_SYSCALL |
677 | def_bool PCI | |
678 | ||
1da177e4 LT |
679 | # Select the host bridge type |
680 | config PCI_HOST_VIA82C505 | |
681 | bool | |
682 | depends on PCI && ARCH_SHARK | |
683 | default y | |
684 | ||
a0113a99 MR |
685 | config PCI_HOST_ITE8152 |
686 | bool | |
687 | depends on PCI && MACH_ARMCORE | |
688 | default y | |
689 | select DMABOUNCE | |
690 | ||
1da177e4 LT |
691 | source "drivers/pci/Kconfig" |
692 | ||
693 | source "drivers/pcmcia/Kconfig" | |
694 | ||
695 | endmenu | |
696 | ||
697 | menu "Kernel Features" | |
698 | ||
0567a0c0 KH |
699 | source "kernel/time/Kconfig" |
700 | ||
1da177e4 LT |
701 | config SMP |
702 | bool "Symmetric Multi-Processing (EXPERIMENTAL)" | |
78fdcb42 | 703 | depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) |
f6dd9fa5 | 704 | select USE_GENERIC_SMP_HELPERS |
1da177e4 LT |
705 | help |
706 | This enables support for systems with more than one CPU. If you have | |
707 | a system with only one CPU, like most personal computers, say N. If | |
708 | you have a system with more than one CPU, say Y. | |
709 | ||
710 | If you say N here, the kernel will run on single and multiprocessor | |
711 | machines, but will use only one CPU of a multiprocessor machine. If | |
712 | you say Y here, the kernel will run on many, but not all, single | |
713 | processor machines. On a single processor machine, the kernel will | |
714 | run faster if you say N here. | |
715 | ||
03502faa | 716 | See also <file:Documentation/i386/IO-APIC.txt>, |
1da177e4 LT |
717 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
718 | <http://www.linuxdoc.org/docs.html#howto>. | |
719 | ||
720 | If you don't know what to do here, say N. | |
721 | ||
722 | config NR_CPUS | |
723 | int "Maximum number of CPUs (2-32)" | |
724 | range 2 32 | |
725 | depends on SMP | |
726 | default "4" | |
727 | ||
a054a811 RK |
728 | config HOTPLUG_CPU |
729 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" | |
730 | depends on SMP && HOTPLUG && EXPERIMENTAL | |
731 | help | |
732 | Say Y here to experiment with turning CPUs off and on. CPUs | |
733 | can be controlled through /sys/devices/system/cpu. | |
734 | ||
37ee16ae RK |
735 | config LOCAL_TIMERS |
736 | bool "Use local timer interrupts" | |
78fdcb42 | 737 | depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) |
37ee16ae RK |
738 | default y |
739 | help | |
740 | Enable support for local timers on SMP platforms, rather then the | |
741 | legacy IPI broadcast method. Local timers allows the system | |
742 | accounting to be spread across the timer interval, preventing a | |
743 | "thundering herd" at every timer tick. | |
744 | ||
1da177e4 LT |
745 | config PREEMPT |
746 | bool "Preemptible Kernel (EXPERIMENTAL)" | |
747 | depends on EXPERIMENTAL | |
748 | help | |
749 | This option reduces the latency of the kernel when reacting to | |
750 | real-time or interactive events by allowing a low priority process to | |
751 | be preempted even if it is in kernel mode executing a system call. | |
752 | This allows applications to run more reliably even when the system is | |
753 | under load. | |
754 | ||
755 | Say Y here if you are building a kernel for a desktop, embedded | |
756 | or real-time system. Say N if you are unsure. | |
757 | ||
f8065813 RK |
758 | config HZ |
759 | int | |
760 | default 128 if ARCH_L7200 | |
761 | default 200 if ARCH_EBSA110 || ARCH_S3C2410 | |
bfe65704 | 762 | default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER |
5248c657 | 763 | default AT91_TIMER_HZ if ARCH_AT91 |
f8065813 RK |
764 | default 100 |
765 | ||
704bdda0 NP |
766 | config AEABI |
767 | bool "Use the ARM EABI to compile the kernel" | |
768 | help | |
769 | This option allows for the kernel to be compiled using the latest | |
770 | ARM ABI (aka EABI). This is only useful if you are using a user | |
771 | space environment that is also compiled with EABI. | |
772 | ||
773 | Since there are major incompatibilities between the legacy ABI and | |
774 | EABI, especially with regard to structure member alignment, this | |
775 | option also changes the kernel syscall calling convention to | |
776 | disambiguate both ABIs and allow for backward compatibility support | |
777 | (selected with CONFIG_OABI_COMPAT). | |
778 | ||
779 | To use this you need GCC version 4.0.0 or later. | |
780 | ||
6c90c872 | 781 | config OABI_COMPAT |
a73a3ff1 | 782 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
61c484d4 | 783 | depends on AEABI && EXPERIMENTAL |
6c90c872 NP |
784 | default y |
785 | help | |
786 | This option preserves the old syscall interface along with the | |
787 | new (ARM EABI) one. It also provides a compatibility layer to | |
788 | intercept syscalls that have structure arguments which layout | |
789 | in memory differs between the legacy ABI and the new ARM EABI | |
790 | (only for non "thumb" binaries). This option adds a tiny | |
791 | overhead to all syscalls and produces a slightly larger kernel. | |
792 | If you know you'll be using only pure EABI user space then you | |
793 | can say N here. If this option is not selected and you attempt | |
794 | to execute a legacy ABI binary then the result will be | |
795 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
796 | at all). If in doubt say Y. | |
797 | ||
3f22ab27 | 798 | config ARCH_DISCONTIGMEM_ENABLE |
1da177e4 | 799 | bool |
f7e68bbf | 800 | default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) |
1da177e4 LT |
801 | help |
802 | Say Y to support efficient handling of discontiguous physical memory, | |
803 | for architectures which are either NUMA (Non-Uniform Memory Access) | |
804 | or have huge holes in the physical address space for other reasons. | |
805 | See <file:Documentation/vm/numa> for more. | |
806 | ||
05944d74 RK |
807 | config ARCH_SPARSEMEM_ENABLE |
808 | bool | |
809 | ||
810 | config ARCH_SELECT_MEMORY_MODEL | |
811 | bool | |
812 | ||
c80d79d7 YG |
813 | config NODES_SHIFT |
814 | int | |
815 | default "4" if ARCH_LH7A40X | |
816 | default "2" | |
817 | depends on NEED_MULTIPLE_NODES | |
818 | ||
3f22ab27 DH |
819 | source "mm/Kconfig" |
820 | ||
1da177e4 LT |
821 | config LEDS |
822 | bool "Timer and CPU usage LEDs" | |
e055d5bf | 823 | depends on ARCH_CDB89712 || ARCH_EBSA110 || \ |
1da177e4 LT |
824 | ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ |
825 | ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ | |
826 | ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ | |
73a59c1c | 827 | ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ |
c53c9cf6 | 828 | ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \ |
817eb210 | 829 | ARCH_KS8695 || MACH_RD88F5182 |
1da177e4 LT |
830 | help |
831 | If you say Y here, the LEDs on your machine will be used | |
832 | to provide useful information about your current system status. | |
833 | ||
834 | If you are compiling a kernel for a NetWinder or EBSA-285, you will | |
835 | be able to select which LEDs are active using the options below. If | |
836 | you are compiling a kernel for the EBSA-110 or the LART however, the | |
837 | red LED will simply flash regularly to indicate that the system is | |
838 | still functional. It is safe to say Y here if you have a CATS | |
839 | system, but the driver will do nothing. | |
840 | ||
841 | config LEDS_TIMER | |
842 | bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ | |
eebdf7d7 DB |
843 | OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ |
844 | || MACH_OMAP_PERSEUS2 | |
1da177e4 | 845 | depends on LEDS |
0567a0c0 | 846 | depends on !GENERIC_CLOCKEVENTS |
1da177e4 LT |
847 | default y if ARCH_EBSA110 |
848 | help | |
849 | If you say Y here, one of the system LEDs (the green one on the | |
850 | NetWinder, the amber one on the EBSA285, or the red one on the LART) | |
851 | will flash regularly to indicate that the system is still | |
852 | operational. This is mainly useful to kernel hackers who are | |
853 | debugging unstable kernels. | |
854 | ||
855 | The LART uses the same LED for both Timer LED and CPU usage LED | |
856 | functions. You may choose to use both, but the Timer LED function | |
857 | will overrule the CPU usage LED. | |
858 | ||
859 | config LEDS_CPU | |
860 | bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ | |
eebdf7d7 DB |
861 | !ARCH_OMAP) \ |
862 | || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ | |
863 | || MACH_OMAP_PERSEUS2 | |
1da177e4 LT |
864 | depends on LEDS |
865 | help | |
866 | If you say Y here, the red LED will be used to give a good real | |
867 | time indication of CPU usage, by lighting whenever the idle task | |
868 | is not currently executing. | |
869 | ||
870 | The LART uses the same LED for both Timer LED and CPU usage LED | |
871 | functions. You may choose to use both, but the Timer LED function | |
872 | will overrule the CPU usage LED. | |
873 | ||
874 | config ALIGNMENT_TRAP | |
875 | bool | |
f12d0d7c | 876 | depends on CPU_CP15_MMU |
1da177e4 LT |
877 | default y if !ARCH_EBSA110 |
878 | help | |
84eb8d06 | 879 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
880 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
881 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
882 | fetch/store instructions will be emulated in software if you say | |
883 | here, which has a severe performance impact. This is necessary for | |
884 | correct operation of some network protocols. With an IP-only | |
885 | configuration it is safe to say N, otherwise say Y. | |
886 | ||
887 | endmenu | |
888 | ||
889 | menu "Boot options" | |
890 | ||
891 | # Compressed boot loader in ROM. Yes, we really want to ask about | |
892 | # TEXT and BSS so we preserve their values in the config files. | |
893 | config ZBOOT_ROM_TEXT | |
894 | hex "Compressed ROM boot loader base address" | |
895 | default "0" | |
896 | help | |
897 | The physical address at which the ROM-able zImage is to be | |
898 | placed in the target. Platforms which normally make use of | |
899 | ROM-able zImage formats normally set this to a suitable | |
900 | value in their defconfig file. | |
901 | ||
902 | If ZBOOT_ROM is not enabled, this has no effect. | |
903 | ||
904 | config ZBOOT_ROM_BSS | |
905 | hex "Compressed ROM boot loader BSS address" | |
906 | default "0" | |
907 | help | |
f8c440b2 DF |
908 | The base address of an area of read/write memory in the target |
909 | for the ROM-able zImage which must be available while the | |
910 | decompressor is running. It must be large enough to hold the | |
911 | entire decompressed kernel plus an additional 128 KiB. | |
912 | Platforms which normally make use of ROM-able zImage formats | |
913 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
914 | |
915 | If ZBOOT_ROM is not enabled, this has no effect. | |
916 | ||
917 | config ZBOOT_ROM | |
918 | bool "Compressed boot loader in ROM/flash" | |
919 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
920 | help | |
921 | Say Y here if you intend to execute your compressed kernel image | |
922 | (zImage) directly from ROM or flash. If unsure, say N. | |
923 | ||
924 | config CMDLINE | |
925 | string "Default kernel command string" | |
926 | default "" | |
927 | help | |
928 | On some architectures (EBSA110 and CATS), there is currently no way | |
929 | for the boot loader to pass arguments to the kernel. For these | |
930 | architectures, you should supply some command-line options at build | |
931 | time by entering them here. As a minimum, you should specify the | |
932 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
933 | ||
934 | config XIP_KERNEL | |
935 | bool "Kernel Execute-In-Place from ROM" | |
936 | depends on !ZBOOT_ROM | |
937 | help | |
938 | Execute-In-Place allows the kernel to run from non-volatile storage | |
939 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
940 | space since the text section of the kernel is not loaded from flash | |
941 | to RAM. Read-write sections, such as the data section and stack, | |
942 | are still copied to RAM. The XIP kernel is not compressed since | |
943 | it has to run directly from flash, so it will take more space to | |
944 | store it. The flash address used to link the kernel object files, | |
945 | and for storing it, is configuration dependent. Therefore, if you | |
946 | say Y here, you must know the proper physical address where to | |
947 | store the kernel image depending on your own flash memory usage. | |
948 | ||
949 | Also note that the make target becomes "make xipImage" rather than | |
950 | "make zImage" or "make Image". The final kernel binary to put in | |
951 | ROM memory will be arch/arm/boot/xipImage. | |
952 | ||
953 | If unsure, say N. | |
954 | ||
955 | config XIP_PHYS_ADDR | |
956 | hex "XIP Kernel Physical Location" | |
957 | depends on XIP_KERNEL | |
958 | default "0x00080000" | |
959 | help | |
960 | This is the physical address in your flash memory the kernel will | |
961 | be linked for and stored to. This address is dependent on your | |
962 | own flash usage. | |
963 | ||
c587e4a6 RP |
964 | config KEXEC |
965 | bool "Kexec system call (EXPERIMENTAL)" | |
966 | depends on EXPERIMENTAL | |
967 | help | |
968 | kexec is a system call that implements the ability to shutdown your | |
969 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 970 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
971 | you can start any kernel with it, not just Linux. |
972 | ||
973 | It is an ongoing process to be certain the hardware in a machine | |
974 | is properly shutdown, so do not be surprised if this code does not | |
975 | initially work for you. It may help to enable device hotplugging | |
976 | support. | |
977 | ||
4cd9d6f7 RP |
978 | config ATAGS_PROC |
979 | bool "Export atags in procfs" | |
b98d7291 UL |
980 | depends on KEXEC |
981 | default y | |
4cd9d6f7 RP |
982 | help |
983 | Should the atags used to boot the kernel be exported in an "atags" | |
984 | file in procfs. Useful with kexec. | |
985 | ||
1da177e4 LT |
986 | endmenu |
987 | ||
9e2697ff | 988 | if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) |
1da177e4 LT |
989 | |
990 | menu "CPU Frequency scaling" | |
991 | ||
992 | source "drivers/cpufreq/Kconfig" | |
993 | ||
994 | config CPU_FREQ_SA1100 | |
995 | bool | |
07c6d48f | 996 | depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) |
1da177e4 LT |
997 | default y |
998 | ||
999 | config CPU_FREQ_SA1110 | |
1000 | bool | |
1001 | depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) | |
1002 | default y | |
1003 | ||
1004 | config CPU_FREQ_INTEGRATOR | |
1005 | tristate "CPUfreq driver for ARM Integrator CPUs" | |
1006 | depends on ARCH_INTEGRATOR && CPU_FREQ | |
1007 | default y | |
1008 | help | |
1009 | This enables the CPUfreq driver for ARM Integrator CPUs. | |
1010 | ||
1011 | For details, take a look at <file:Documentation/cpu-freq>. | |
1012 | ||
1013 | If in doubt, say Y. | |
1014 | ||
3c8cd0cc PP |
1015 | config CPU_FREQ_IMX |
1016 | tristate "CPUfreq driver for i.MX CPUs" | |
1017 | depends on ARCH_IMX && CPU_FREQ | |
1018 | default n | |
1019 | help | |
1020 | This enables the CPUfreq driver for i.MX CPUs. | |
1021 | ||
1022 | If in doubt, say N. | |
1023 | ||
9e2697ff RK |
1024 | config CPU_FREQ_PXA |
1025 | bool | |
1026 | depends on CPU_FREQ && ARCH_PXA && PXA25x | |
1027 | default y | |
1028 | select CPU_FREQ_DEFAULT_GOV_USERSPACE | |
1029 | ||
1da177e4 LT |
1030 | endmenu |
1031 | ||
1032 | endif | |
1033 | ||
1034 | menu "Floating point emulation" | |
1035 | ||
1036 | comment "At least one emulation must be selected" | |
1037 | ||
1038 | config FPE_NWFPE | |
1039 | bool "NWFPE math emulation" | |
8993a44c | 1040 | depends on !AEABI || OABI_COMPAT |
1da177e4 LT |
1041 | ---help--- |
1042 | Say Y to include the NWFPE floating point emulator in the kernel. | |
1043 | This is necessary to run most binaries. Linux does not currently | |
1044 | support floating point hardware so you need to say Y here even if | |
1045 | your machine has an FPA or floating point co-processor podule. | |
1046 | ||
1047 | You may say N here if you are going to load the Acorn FPEmulator | |
1048 | early in the bootup. | |
1049 | ||
1050 | config FPE_NWFPE_XP | |
1051 | bool "Support extended precision" | |
bedf142b | 1052 | depends on FPE_NWFPE |
1da177e4 LT |
1053 | help |
1054 | Say Y to include 80-bit support in the kernel floating-point | |
1055 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
1056 | Note that gcc does not generate 80-bit operations by default, | |
1057 | so in most cases this option only enlarges the size of the | |
1058 | floating point emulator without any good reason. | |
1059 | ||
1060 | You almost surely want to say N here. | |
1061 | ||
1062 | config FPE_FASTFPE | |
1063 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
8993a44c | 1064 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL |
1da177e4 LT |
1065 | ---help--- |
1066 | Say Y here to include the FAST floating point emulator in the kernel. | |
1067 | This is an experimental much faster emulator which now also has full | |
1068 | precision for the mantissa. It does not support any exceptions. | |
1069 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
1070 | ||
1071 | It should be sufficient for most programs. It may be not suitable | |
1072 | for scientific calculations, but you have to check this for yourself. | |
1073 | If you do not feel you need a faster FP emulation you should better | |
1074 | choose NWFPE. | |
1075 | ||
1076 | config VFP | |
1077 | bool "VFP-format floating point maths" | |
c00d4ffd | 1078 | depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
1079 | help |
1080 | Say Y to include VFP support code in the kernel. This is needed | |
1081 | if your hardware includes a VFP unit. | |
1082 | ||
1083 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
1084 | release notes and additional status information. | |
1085 | ||
1086 | Say N if your target does not have VFP hardware. | |
1087 | ||
25ebee02 CM |
1088 | config VFPv3 |
1089 | bool | |
1090 | depends on VFP | |
1091 | default y if CPU_V7 | |
1092 | ||
b5872db4 CM |
1093 | config NEON |
1094 | bool "Advanced SIMD (NEON) Extension support" | |
1095 | depends on VFPv3 && CPU_V7 | |
1096 | help | |
1097 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
1098 | Extension. | |
1099 | ||
1da177e4 LT |
1100 | endmenu |
1101 | ||
1102 | menu "Userspace binary formats" | |
1103 | ||
1104 | source "fs/Kconfig.binfmt" | |
1105 | ||
1106 | config ARTHUR | |
1107 | tristate "RISC OS personality" | |
704bdda0 | 1108 | depends on !AEABI |
1da177e4 LT |
1109 | help |
1110 | Say Y here to include the kernel code necessary if you want to run | |
1111 | Acorn RISC OS/Arthur binaries under Linux. This code is still very | |
1112 | experimental; if this sounds frightening, say N and sleep in peace. | |
1113 | You can also say M here to compile this support as a module (which | |
1114 | will be called arthur). | |
1115 | ||
1116 | endmenu | |
1117 | ||
1118 | menu "Power management options" | |
1119 | ||
eceab4ac | 1120 | source "kernel/power/Kconfig" |
1da177e4 | 1121 | |
f4cb5700 JB |
1122 | config ARCH_SUSPEND_POSSIBLE |
1123 | def_bool y | |
1124 | ||
1da177e4 LT |
1125 | endmenu |
1126 | ||
d5950b43 SR |
1127 | source "net/Kconfig" |
1128 | ||
1da177e4 LT |
1129 | menu "Device Drivers" |
1130 | ||
1131 | source "drivers/base/Kconfig" | |
1132 | ||
c35bf4a5 PM |
1133 | source "drivers/connector/Kconfig" |
1134 | ||
f12d0d7c | 1135 | if ALIGNMENT_TRAP || !CPU_CP15_MMU |
1da177e4 LT |
1136 | source "drivers/mtd/Kconfig" |
1137 | endif | |
1138 | ||
1139 | source "drivers/parport/Kconfig" | |
1140 | ||
1141 | source "drivers/pnp/Kconfig" | |
1142 | ||
1143 | source "drivers/block/Kconfig" | |
1144 | ||
58273e55 RK |
1145 | # misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4 |
1146 | ||
1147 | source "drivers/misc/Kconfig" | |
1148 | ||
1da177e4 | 1149 | source "drivers/ide/Kconfig" |
1da177e4 LT |
1150 | |
1151 | source "drivers/scsi/Kconfig" | |
1152 | ||
eb370f0b MM |
1153 | source "drivers/ata/Kconfig" |
1154 | ||
1da177e4 LT |
1155 | source "drivers/md/Kconfig" |
1156 | ||
1157 | source "drivers/message/fusion/Kconfig" | |
1158 | ||
1159 | source "drivers/ieee1394/Kconfig" | |
1160 | ||
1161 | source "drivers/message/i2o/Kconfig" | |
1162 | ||
d5950b43 | 1163 | source "drivers/net/Kconfig" |
1da177e4 LT |
1164 | |
1165 | source "drivers/isdn/Kconfig" | |
1166 | ||
1167 | # input before char - char/joystick depends on it. As does USB. | |
1168 | ||
1169 | source "drivers/input/Kconfig" | |
1170 | ||
1171 | source "drivers/char/Kconfig" | |
1172 | ||
1173 | source "drivers/i2c/Kconfig" | |
1174 | ||
8ae12a0d DB |
1175 | source "drivers/spi/Kconfig" |
1176 | ||
a9c5fff5 DB |
1177 | source "drivers/gpio/Kconfig" |
1178 | ||
04916c0e AZ |
1179 | source "drivers/w1/Kconfig" |
1180 | ||
58273e55 RK |
1181 | source "drivers/power/Kconfig" |
1182 | ||
ad2f931d JD |
1183 | source "drivers/hwmon/Kconfig" |
1184 | ||
70dfa3f8 RK |
1185 | source "drivers/watchdog/Kconfig" |
1186 | ||
58273e55 | 1187 | source "drivers/ssb/Kconfig" |
1da177e4 | 1188 | |
58273e55 | 1189 | #source "drivers/l3/Kconfig" |
1da177e4 | 1190 | |
a4e137ab RK |
1191 | source "drivers/mfd/Kconfig" |
1192 | ||
1da177e4 LT |
1193 | source "drivers/media/Kconfig" |
1194 | ||
1195 | source "drivers/video/Kconfig" | |
1196 | ||
1197 | source "sound/Kconfig" | |
1198 | ||
c2dade51 SH |
1199 | source "drivers/hid/Kconfig" |
1200 | ||
1da177e4 LT |
1201 | source "drivers/usb/Kconfig" |
1202 | ||
1203 | source "drivers/mmc/Kconfig" | |
1204 | ||
58273e55 RK |
1205 | source "drivers/leds/Kconfig" |
1206 | ||
12b824fb AZ |
1207 | source "drivers/rtc/Kconfig" |
1208 | ||
5816815f DW |
1209 | source "drivers/dma/Kconfig" |
1210 | ||
abf07b19 DW |
1211 | source "drivers/dca/Kconfig" |
1212 | ||
2dc034a8 HJK |
1213 | source "drivers/uio/Kconfig" |
1214 | ||
1da177e4 LT |
1215 | endmenu |
1216 | ||
1217 | source "fs/Kconfig" | |
1218 | ||
1da177e4 LT |
1219 | source "arch/arm/Kconfig.debug" |
1220 | ||
1221 | source "security/Kconfig" | |
1222 | ||
1223 | source "crypto/Kconfig" | |
1224 | ||
1225 | source "lib/Kconfig" |