projects / linux-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
gpio.h: fix location of gpio legacy documentation
[linux-block.git] / Documentation / trace / histogram.txt
CommitLineData
b8df4a36
TZ		 1 Event Histograms
2
3 Documentation written by Tom Zanussi
4
51. Introduction
6===============
7
8 Histogram triggers are special event triggers that can be used to
9 aggregate trace event data into histograms. For information on
5fb94e9c 10 trace events and event triggers, see Documentation/trace/events.rst.
b8df4a36
TZ		 11
12
132. Histogram Trigger Command
14============================
15
16 A histogram trigger command is an event trigger command that
17 aggregates event hits into a hash table keyed on one or more trace
18 event format fields (or stacktrace) and a set of running totals
19 derived from one or more trace event format fields and/or event
20 counts (hitcount).
21
22 The format of a hist trigger is as follows:
23
24 hist:keys=<field1[,field2,...]>[:values=<field1[,field2,...]>]
25 [:sort=<field1[,field2,...]>][:size=#entries][:pause][:continue]
26 [:clear][:name=histname1] [if <filter>]
27
28 When a matching event is hit, an entry is added to a hash table
29 using the key(s) and value(s) named. Keys and values correspond to
30 fields in the event's format description. Values must correspond to
31 numeric fields - on an event hit, the value(s) will be added to a
32 sum kept for that field. The special string 'hitcount' can be used
33 in place of an explicit value field - this is simply a count of
34 event hits. If 'values' isn't specified, an implicit 'hitcount'
35 value will be automatically created and used as the only value.
36 Keys can be any field, or the special string 'stacktrace', which
37 will use the event's kernel stacktrace as the key. The keywords
38 'keys' or 'key' can be used to specify keys, and the keywords
39 'values', 'vals', or 'val' can be used to specify values. Compound
40 keys consisting of up to two fields can be specified by the 'keys'
41 keyword. Hashing a compound key produces a unique entry in the
42 table for each unique combination of component keys, and can be
43 useful for providing more fine-grained summaries of event data.
44 Additionally, sort keys consisting of up to two fields can be
45 specified by the 'sort' keyword. If more than one field is
46 specified, the result will be a 'sort within a sort': the first key
47 is taken to be the primary sort key and the second the secondary
48 key. If a hist trigger is given a name using the 'name' parameter,
49 its histogram data will be shared with other triggers of the same
50 name, and trigger hits will update this common data. Only triggers
51 with 'compatible' fields can be combined in this way; triggers are
52 'compatible' if the fields named in the trigger share the same
53 number and type of fields and those fields also have the same names.
54 Note that any two events always share the compatible 'hitcount' and
55 'stacktrace' fields and can therefore be combined using those
56 fields, however pointless that may be.
57
58 'hist' triggers add a 'hist' file to each event's subdirectory.
59 Reading the 'hist' file for the event will dump the hash table in
60 its entirety to stdout. If there are multiple hist triggers
61 attached to an event, there will be a table for each trigger in the
62 output. The table displayed for a named trigger will be the same as
63 any other instance having the same name. Each printed hash table
64 entry is a simple list of the keys and values comprising the entry;
65 keys are printed first and are delineated by curly braces, and are
66 followed by the set of value fields for the entry. By default,
67 numeric fields are displayed as base-10 integers. This can be
68 modified by appending any of the following modifiers to the field
69 name:
70
71 .hex display a number as a hex value
72 .sym display an address as a symbol
73 .sym-offset display an address as a symbol and offset
74 .syscall display a syscall id as a system call name
75 .execname display a common_pid as a program name
442c9484 76 .log2 display log2 value rather than raw number
860f9f6b 77 .usecs display a common_timestamp in microseconds
b8df4a36
TZ		 78
79 Note that in general the semantics of a given field aren't
80 interpreted when applying a modifier to it, but there are some
81 restrictions to be aware of in this regard:
82
83 - only the 'hex' modifier can be used for values (because values
84 are essentially sums, and the other modifiers don't make sense
85 in that context).
86 - the 'execname' modifier can only be used on a 'common_pid'. The
87 reason for this is that the execname is simply the 'comm' value
88 saved for the 'current' process when an event was triggered,
89 which is the same as the common_pid value saved by the event
90 tracing code. Trying to apply that comm value to other pid
91 values wouldn't be correct, and typically events that care save
92 pid-specific comm fields in the event itself.
93
94 A typical usage scenario would be the following to enable a hist
95 trigger, read its current contents, and then turn it off:
96
97 # echo 'hist:keys=skbaddr.hex:vals=len' > \
98 /sys/kernel/debug/tracing/events/net/netif_rx/trigger
99
100 # cat /sys/kernel/debug/tracing/events/net/netif_rx/hist
101
102 # echo '!hist:keys=skbaddr.hex:vals=len' > \
103 /sys/kernel/debug/tracing/events/net/netif_rx/trigger
104
105 The trigger file itself can be read to show the details of the
106 currently attached hist trigger. This information is also displayed
107 at the top of the 'hist' file when read.
108
109 By default, the size of the hash table is 2048 entries. The 'size'
110 parameter can be used to specify more or fewer than that. The units
111 are in terms of hashtable entries - if a run uses more entries than
112 specified, the results will show the number of 'drops', the number
113 of hits that were ignored. The size should be a power of 2 between
114 128 and 131072 (any non- power-of-2 number specified will be rounded
115 up).
116
117 The 'sort' parameter can be used to specify a value field to sort
118 on. The default if unspecified is 'hitcount' and the default sort
119 order is 'ascending'. To sort in the opposite direction, append
120 .descending' to the sort key.
121
122 The 'pause' parameter can be used to pause an existing hist trigger
123 or to start a hist trigger but not log any events until told to do
124 so. 'continue' or 'cont' can be used to start or restart a paused
125 hist trigger.
126
127 The 'clear' parameter will clear the contents of a running hist
128 trigger and leave its current paused/active state.
129
130 Note that the 'pause', 'cont', and 'clear' parameters should be
131 applied using 'append' shell operator ('>>') if applied to an
132 existing trigger, rather than via the '>' operator, which will cause
133 the trigger to be removed through truncation.
134
135- enable_hist/disable_hist
136
137 The enable_hist and disable_hist triggers can be used to have one
138 event conditionally start and stop another event's already-attached
139 hist trigger. Any number of enable_hist and disable_hist triggers
140 can be attached to a given event, allowing that event to kick off
141 and stop aggregations on a host of other events.
142
143 The format is very similar to the enable/disable_event triggers:
144
145 enable_hist:<system>:<event>[:count]
146 disable_hist:<system>:<event>[:count]
147
148 Instead of enabling or disabling the tracing of the target event
149 into the trace buffer as the enable/disable_event triggers do, the
150 enable/disable_hist triggers enable or disable the aggregation of
151 the target event into a hash table.
152
153 A typical usage scenario for the enable_hist/disable_hist triggers
154 would be to first set up a paused hist trigger on some event,
155 followed by an enable_hist/disable_hist pair that turns the hist
156 aggregation on and off when conditions of interest are hit:
157
158 # echo 'hist:keys=skbaddr.hex:vals=len:pause' > \
159 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
160
161 # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \
162 /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
163
164 # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \
165 /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
166
167 The above sets up an initially paused hist trigger which is unpaused
168 and starts aggregating events when a given program is executed, and
169 which stops aggregating when the process exits and the hist trigger
170 is paused again.
171
172 The examples below provide a more concrete illustration of the
173 concepts and typical usage patterns discussed above.
174
8b7622bf
TZ		 175 'special' event fields
176 ------------------------
177
178 There are a number of 'special event fields' available for use as
179 keys or values in a hist trigger. These look like and behave as if
180 they were actual event fields, but aren't really part of the event's
181 field definition or format file. They are however available for any
182 event, and can be used anywhere an actual event field could be.
183 They are:
184
185 common_timestamp u64 - timestamp (from ring buffer) associated
186 with the event, in nanoseconds. May be
187 modified by .usecs to have timestamps
188 interpreted as microseconds.
189 cpu int - the cpu on which the event occurred.
b8df4a36 190
f404da6e
TZ		 191 Extended error information
192 --------------------------
193
194 For some error conditions encountered when invoking a hist trigger
195 command, extended error information is available via the
196 corresponding event's 'hist' file. Reading the hist file after an
197 error will display more detailed information about what went wrong,
198 if information is available. This extended error information will
199 be available until the next hist trigger command for that event.
200
201 If available for a given error condition, the extended error
202 information and usage takes the following form:
203
204 # echo xxx > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
205 echo: write error: Invalid argument
206
207 # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
208 ERROR: Couldn't yyy: zzz
209 Last command: xxx
210
b8df4a36
TZ		 2116.2 'hist' trigger examples
212---------------------------
213
214 The first set of examples creates aggregations using the kmalloc
215 event. The fields that can be used for the hist trigger are listed
216 in the kmalloc event's format file:
217
218 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/format
219 name: kmalloc
220 ID: 374
221 format:
222 field:unsigned short common_type; offset:0; size:2; signed:0;
223 field:unsigned char common_flags; offset:2; size:1; signed:0;
224 field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
225 field:int common_pid; offset:4; size:4; signed:1;
226
227 field:unsigned long call_site; offset:8; size:8; signed:0;
228 field:const void * ptr; offset:16; size:8; signed:0;
229 field:size_t bytes_req; offset:24; size:8; signed:0;
230 field:size_t bytes_alloc; offset:32; size:8; signed:0;
231 field:gfp_t gfp_flags; offset:40; size:4; signed:0;
232
233 We'll start by creating a hist trigger that generates a simple table
234 that lists the total number of bytes requested for each function in
235 the kernel that made one or more calls to kmalloc:
236
237 # echo 'hist:key=call_site:val=bytes_req' > \
238 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
239
240 This tells the tracing system to create a 'hist' trigger using the
241 call_site field of the kmalloc event as the key for the table, which
242 just means that each unique call_site address will have an entry
243 created for it in the table. The 'val=bytes_req' parameter tells
244 the hist trigger that for each unique entry (call_site) in the
245 table, it should keep a running total of the number of bytes
246 requested by that call_site.
247
248 We'll let it run for awhile and then dump the contents of the 'hist'
249 file in the kmalloc event's subdirectory (for readability, a number
250 of entries have been omitted):
251
252 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
253 # trigger info: hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active]
254
255 { call_site: 18446744072106379007 } hitcount: 1 bytes_req: 176
256 { call_site: 18446744071579557049 } hitcount: 1 bytes_req: 1024
257 { call_site: 18446744071580608289 } hitcount: 1 bytes_req: 16384
258 { call_site: 18446744071581827654 } hitcount: 1 bytes_req: 24
259 { call_site: 18446744071580700980 } hitcount: 1 bytes_req: 8
260 { call_site: 18446744071579359876 } hitcount: 1 bytes_req: 152
261 { call_site: 18446744071580795365 } hitcount: 3 bytes_req: 144
262 { call_site: 18446744071581303129 } hitcount: 3 bytes_req: 144
263 { call_site: 18446744071580713234 } hitcount: 4 bytes_req: 2560
264 { call_site: 18446744071580933750 } hitcount: 4 bytes_req: 736
265 .
266 .
267 .
268 { call_site: 18446744072106047046 } hitcount: 69 bytes_req: 5576
269 { call_site: 18446744071582116407 } hitcount: 73 bytes_req: 2336
270 { call_site: 18446744072106054684 } hitcount: 136 bytes_req: 140504
271 { call_site: 18446744072106224230 } hitcount: 136 bytes_req: 19584
272 { call_site: 18446744072106078074 } hitcount: 153 bytes_req: 2448
273 { call_site: 18446744072106062406 } hitcount: 153 bytes_req: 36720
274 { call_site: 18446744071582507929 } hitcount: 153 bytes_req: 37088
275 { call_site: 18446744072102520590 } hitcount: 273 bytes_req: 10920
276 { call_site: 18446744071582143559 } hitcount: 358 bytes_req: 716
277 { call_site: 18446744072106465852 } hitcount: 417 bytes_req: 56712
278 { call_site: 18446744072102523378 } hitcount: 485 bytes_req: 27160
279 { call_site: 18446744072099568646 } hitcount: 1676 bytes_req: 33520
280
281 Totals:
282 Hits: 4610
283 Entries: 45
284 Dropped: 0
285
286 The output displays a line for each entry, beginning with the key
287 specified in the trigger, followed by the value(s) also specified in
288 the trigger. At the beginning of the output is a line that displays
289 the trigger info, which can also be displayed by reading the
290 'trigger' file:
291
292 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
293 hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active]
294
295 At the end of the output are a few lines that display the overall
296 totals for the run. The 'Hits' field shows the total number of
297 times the event trigger was hit, the 'Entries' field shows the total
298 number of used entries in the hash table, and the 'Dropped' field
299 shows the number of hits that were dropped because the number of
300 used entries for the run exceeded the maximum number of entries
301 allowed for the table (normally 0, but if not a hint that you may
302 want to increase the size of the table using the 'size' parameter).
303
304 Notice in the above output that there's an extra field, 'hitcount',
305 which wasn't specified in the trigger. Also notice that in the
306 trigger info output, there's a parameter, 'sort=hitcount', which
307 wasn't specified in the trigger either. The reason for that is that
308 every trigger implicitly keeps a count of the total number of hits
309 attributed to a given entry, called the 'hitcount'. That hitcount
310 information is explicitly displayed in the output, and in the
311 absence of a user-specified sort parameter, is used as the default
312 sort field.
313
314 The value 'hitcount' can be used in place of an explicit value in
315 the 'values' parameter if you don't really need to have any
316 particular field summed and are mainly interested in hit
317 frequencies.
318
319 To turn the hist trigger off, simply call up the trigger in the
320 command history and re-execute it with a '!' prepended:
321
322 # echo '!hist:key=call_site:val=bytes_req' > \
323 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
324
325 Finally, notice that the call_site as displayed in the output above
326 isn't really very useful. It's an address, but normally addresses
327 are displayed in hex. To have a numeric field displayed as a hex
328 value, simply append '.hex' to the field name in the trigger:
329
330 # echo 'hist:key=call_site.hex:val=bytes_req' > \
331 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
332
333 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
334 # trigger info: hist:keys=call_site.hex:vals=bytes_req:sort=hitcount:size=2048 [active]
335
336 { call_site: ffffffffa026b291 } hitcount: 1 bytes_req: 433
337 { call_site: ffffffffa07186ff } hitcount: 1 bytes_req: 176
338 { call_site: ffffffff811ae721 } hitcount: 1 bytes_req: 16384
339 { call_site: ffffffff811c5134 } hitcount: 1 bytes_req: 8
340 { call_site: ffffffffa04a9ebb } hitcount: 1 bytes_req: 511
341 { call_site: ffffffff8122e0a6 } hitcount: 1 bytes_req: 12
342 { call_site: ffffffff8107da84 } hitcount: 1 bytes_req: 152
343 { call_site: ffffffff812d8246 } hitcount: 1 bytes_req: 24
344 { call_site: ffffffff811dc1e5 } hitcount: 3 bytes_req: 144
345 { call_site: ffffffffa02515e8 } hitcount: 3 bytes_req: 648
346 { call_site: ffffffff81258159 } hitcount: 3 bytes_req: 144
347 { call_site: ffffffff811c80f4 } hitcount: 4 bytes_req: 544
348 .
349 .
350 .
351 { call_site: ffffffffa06c7646 } hitcount: 106 bytes_req: 8024
352 { call_site: ffffffffa06cb246 } hitcount: 132 bytes_req: 31680
353 { call_site: ffffffffa06cef7a } hitcount: 132 bytes_req: 2112
354 { call_site: ffffffff8137e399 } hitcount: 132 bytes_req: 23232
355 { call_site: ffffffffa06c941c } hitcount: 185 bytes_req: 171360
356 { call_site: ffffffffa06f2a66 } hitcount: 185 bytes_req: 26640
357 { call_site: ffffffffa036a70e } hitcount: 265 bytes_req: 10600
358 { call_site: ffffffff81325447 } hitcount: 292 bytes_req: 584
359 { call_site: ffffffffa072da3c } hitcount: 446 bytes_req: 60656
360 { call_site: ffffffffa036b1f2 } hitcount: 526 bytes_req: 29456
361 { call_site: ffffffffa0099c06 } hitcount: 1780 bytes_req: 35600
362
363 Totals:
364 Hits: 4775
365 Entries: 46
366 Dropped: 0
367
368 Even that's only marginally more useful - while hex values do look
369 more like addresses, what users are typically more interested in
370 when looking at text addresses are the corresponding symbols
371 instead. To have an address displayed as symbolic value instead,
372 simply append '.sym' or '.sym-offset' to the field name in the
373 trigger:
374
375 # echo 'hist:key=call_site.sym:val=bytes_req' > \
376 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
377
378 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
379 # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=hitcount:size=2048 [active]
380
381 { call_site: [ffffffff810adcb9] syslog_print_all } hitcount: 1 bytes_req: 1024
382 { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8
383 { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7
384 { call_site: [ffffffff8154acbe] usb_alloc_urb } hitcount: 1 bytes_req: 192
385 { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7
386 { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40
387 { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128
388 { call_site: [ffffffff811febd5] fsnotify_alloc_group } hitcount: 2 bytes_req: 528
389 { call_site: [ffffffff81440f58] __tty_buffer_request_room } hitcount: 2 bytes_req: 2624
390 { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 2 bytes_req: 96
391 { call_site: [ffffffffa05e19af] ieee80211_start_tx_ba_session [mac80211] } hitcount: 2 bytes_req: 464
392 { call_site: [ffffffff81672406] tcp_get_metrics } hitcount: 2 bytes_req: 304
393 { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128
394 { call_site: [ffffffff81089b05] sched_create_group } hitcount: 2 bytes_req: 1424
395 .
396 .
397 .
398 { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1185 bytes_req: 123240
399 { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 1185 bytes_req: 104280
400 { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 1402 bytes_req: 190672
401 { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 1518 bytes_req: 146208
402 { call_site: [ffffffffa029070e] drm_vma_node_allow [drm] } hitcount: 1746 bytes_req: 69840
403 { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 2021 bytes_req: 792312
404 { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 2592 bytes_req: 145152
405 { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2629 bytes_req: 378576
406 { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2629 bytes_req: 3783248
407 { call_site: [ffffffff81325607] apparmor_file_alloc_security } hitcount: 5192 bytes_req: 10384
408 { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 5529 bytes_req: 110584
409 { call_site: [ffffffff8131ebf7] aa_alloc_task_context } hitcount: 21943 bytes_req: 702176
410 { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 55759 bytes_req: 5074265
411
412 Totals:
413 Hits: 109928
414 Entries: 71
415 Dropped: 0
416
417 Because the default sort key above is 'hitcount', the above shows a
418 the list of call_sites by increasing hitcount, so that at the bottom
419 we see the functions that made the most kmalloc calls during the
420 run. If instead we we wanted to see the top kmalloc callers in
421 terms of the number of bytes requested rather than the number of
422 calls, and we wanted the top caller to appear at the top, we can use
423 the 'sort' parameter, along with the 'descending' modifier:
424
425 # echo 'hist:key=call_site.sym:val=bytes_req:sort=bytes_req.descending' > \
426 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
427
428 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
429 # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=bytes_req.descending:size=2048 [active]
430
431 { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2186 bytes_req: 3397464
432 { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1790 bytes_req: 712176
433 { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 8132 bytes_req: 513135
434 { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 106 bytes_req: 440128
435 { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2186 bytes_req: 314784
436 { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 2174 bytes_req: 208992
437 { call_site: [ffffffff811ae8e1] __kmalloc } hitcount: 8 bytes_req: 131072
438 { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 859 bytes_req: 116824
439 { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 1834 bytes_req: 102704
440 { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 972 bytes_req: 101088
441 { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 972 bytes_req: 85536
442 { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 3333 bytes_req: 66664
443 { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 209 bytes_req: 61632
444 .
445 .
446 .
447 { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128
448 { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128
449 { call_site: [ffffffff812d8406] copy_semundo } hitcount: 2 bytes_req: 48
450 { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 1 bytes_req: 48
451 { call_site: [ffffffffa027121a] drm_getmagic [drm] } hitcount: 1 bytes_req: 48
452 { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40
453 { call_site: [ffffffff811c52f4] bprm_change_interp } hitcount: 2 bytes_req: 16
454 { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8
455 { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7
456 { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7
457
458 Totals:
459 Hits: 32133
460 Entries: 81
461 Dropped: 0
462
463 To display the offset and size information in addition to the symbol
464 name, just use 'sym-offset' instead:
465
466 # echo 'hist:key=call_site.sym-offset:val=bytes_req:sort=bytes_req.descending' > \
467 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
468
469 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
470 # trigger info: hist:keys=call_site.sym-offset:vals=bytes_req:sort=bytes_req.descending:size=2048 [active]
471
472 { call_site: [ffffffffa046041c] i915_gem_execbuffer2+0x6c/0x2c0 [i915] } hitcount: 4569 bytes_req: 3163720
473 { call_site: [ffffffffa0489a66] intel_ring_begin+0xc6/0x1f0 [i915] } hitcount: 4569 bytes_req: 657936
474 { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23+0x694/0x1020 [i915] } hitcount: 1519 bytes_req: 472936
475 { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23+0x516/0x1020 [i915] } hitcount: 3050 bytes_req: 211832
476 { call_site: [ffffffff811e2a1b] seq_buf_alloc+0x1b/0x50 } hitcount: 34 bytes_req: 148384
477 { call_site: [ffffffffa04a580c] intel_crtc_page_flip+0xbc/0x870 [i915] } hitcount: 1385 bytes_req: 144040
478 { call_site: [ffffffff811ae8e1] __kmalloc+0x191/0x1b0 } hitcount: 8 bytes_req: 131072
479 { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl+0x282/0x360 [drm] } hitcount: 1385 bytes_req: 121880
480 { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc+0x32/0x100 [drm] } hitcount: 1848 bytes_req: 103488
481 { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state+0x2c/0xa0 [i915] } hitcount: 461 bytes_req: 62696
482 { call_site: [ffffffffa029070e] drm_vma_node_allow+0x2e/0xd0 [drm] } hitcount: 1541 bytes_req: 61640
483 { call_site: [ffffffff815f8d7b] sk_prot_alloc+0xcb/0x1b0 } hitcount: 57 bytes_req: 57456
484 .
485 .
486 .
487 { call_site: [ffffffff8109524a] alloc_fair_sched_group+0x5a/0x1a0 } hitcount: 2 bytes_req: 128
488 { call_site: [ffffffffa027b921] drm_vm_open_locked+0x31/0xa0 [drm] } hitcount: 3 bytes_req: 96
489 { call_site: [ffffffff8122e266] proc_self_follow_link+0x76/0xb0 } hitcount: 8 bytes_req: 96
490 { call_site: [ffffffff81213e80] load_elf_binary+0x240/0x1650 } hitcount: 3 bytes_req: 84
491 { call_site: [ffffffff8154bc62] usb_control_msg+0x42/0x110 } hitcount: 1 bytes_req: 8
492 { call_site: [ffffffffa00bf6fe] hidraw_send_report+0x7e/0x1a0 [hid] } hitcount: 1 bytes_req: 7
493 { call_site: [ffffffffa00bf1ca] hidraw_report_event+0x8a/0x120 [hid] } hitcount: 1 bytes_req: 7
494
495 Totals:
496 Hits: 26098
497 Entries: 64
498 Dropped: 0
499
500 We can also add multiple fields to the 'values' parameter. For
501 example, we might want to see the total number of bytes allocated
502 alongside bytes requested, and display the result sorted by bytes
503 allocated in a descending order:
504
505 # echo 'hist:keys=call_site.sym:values=bytes_req,bytes_alloc:sort=bytes_alloc.descending' > \
506 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
507
508 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
509 # trigger info: hist:keys=call_site.sym:vals=bytes_req,bytes_alloc:sort=bytes_alloc.descending:size=2048 [active]
510
511 { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 7403 bytes_req: 4084360 bytes_alloc: 5958016
512 { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 541 bytes_req: 2213968 bytes_alloc: 2228224
513 { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 7404 bytes_req: 1066176 bytes_alloc: 1421568
514 { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1565 bytes_req: 557368 bytes_alloc: 1037760
515 { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 9557 bytes_req: 595778 bytes_alloc: 695744
516 { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 5839 bytes_req: 430680 bytes_alloc: 470400
517 { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 2388 bytes_req: 324768 bytes_alloc: 458496
518 { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 3911 bytes_req: 219016 bytes_alloc: 250304
519 { call_site: [ffffffff815f8d7b] sk_prot_alloc } hitcount: 235 bytes_req: 236880 bytes_alloc: 240640
520 { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 557 bytes_req: 169024 bytes_alloc: 221760
521 { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 9378 bytes_req: 187548 bytes_alloc: 206312
522 { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1519 bytes_req: 157976 bytes_alloc: 194432
523 .
524 .
525 .
526 { call_site: [ffffffff8109bd3b] sched_autogroup_create_attach } hitcount: 2 bytes_req: 144 bytes_alloc: 192
527 { call_site: [ffffffff81097ee8] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
528 { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
529 { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
530 { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
531 { call_site: [ffffffff81213e80] load_elf_binary } hitcount: 3 bytes_req: 84 bytes_alloc: 96
532 { call_site: [ffffffff81079a2e] kthread_create_on_node } hitcount: 1 bytes_req: 56 bytes_alloc: 64
533 { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8
534 { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 bytes_alloc: 8
535 { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8
536
537 Totals:
538 Hits: 66598
539 Entries: 65
540 Dropped: 0
541
542 Finally, to finish off our kmalloc example, instead of simply having
543 the hist trigger display symbolic call_sites, we can have the hist
544 trigger additionally display the complete set of kernel stack traces
545 that led to each call_site. To do that, we simply use the special
546 value 'stacktrace' for the key parameter:
547
548 # echo 'hist:keys=stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \
549 /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
550
551 The above trigger will use the kernel stack trace in effect when an
552 event is triggered as the key for the hash table. This allows the
553 enumeration of every kernel callpath that led up to a particular
554 event, along with a running total of any of the event fields for
555 that event. Here we tally bytes requested and bytes allocated for
556 every callpath in the system that led up to a kmalloc (in this case
557 every callpath to a kmalloc for a kernel compile):
558
559 # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
560 # trigger info: hist:keys=stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active]
561
562 { stacktrace:
563 __kmalloc_track_caller+0x10b/0x1a0
564 kmemdup+0x20/0x50
565 hidraw_report_event+0x8a/0x120 [hid]
566 hid_report_raw_event+0x3ea/0x440 [hid]
567 hid_input_report+0x112/0x190 [hid]
568 hid_irq_in+0xc2/0x260 [usbhid]
569 __usb_hcd_giveback_urb+0x72/0x120
570 usb_giveback_urb_bh+0x9e/0xe0
571 tasklet_hi_action+0xf8/0x100
572 __do_softirq+0x114/0x2c0
573 irq_exit+0xa5/0xb0
574 do_IRQ+0x5a/0xf0
575 ret_from_intr+0x0/0x30
576 cpuidle_enter+0x17/0x20
577 cpu_startup_entry+0x315/0x3e0
578 rest_init+0x7c/0x80
579 } hitcount: 3 bytes_req: 21 bytes_alloc: 24
580 { stacktrace:
581 __kmalloc_track_caller+0x10b/0x1a0
582 kmemdup+0x20/0x50
583 hidraw_report_event+0x8a/0x120 [hid]
584 hid_report_raw_event+0x3ea/0x440 [hid]
585 hid_input_report+0x112/0x190 [hid]
586 hid_irq_in+0xc2/0x260 [usbhid]
587 __usb_hcd_giveback_urb+0x72/0x120
588 usb_giveback_urb_bh+0x9e/0xe0
589 tasklet_hi_action+0xf8/0x100
590 __do_softirq+0x114/0x2c0
591 irq_exit+0xa5/0xb0
592 do_IRQ+0x5a/0xf0
593 ret_from_intr+0x0/0x30
594 } hitcount: 3 bytes_req: 21 bytes_alloc: 24
595 { stacktrace:
596 kmem_cache_alloc_trace+0xeb/0x150
597 aa_alloc_task_context+0x27/0x40
598 apparmor_cred_prepare+0x1f/0x50
599 security_prepare_creds+0x16/0x20
600 prepare_creds+0xdf/0x1a0
601 SyS_capset+0xb5/0x200
602 system_call_fastpath+0x12/0x6a
603 } hitcount: 1 bytes_req: 32 bytes_alloc: 32
604 .
605 .
606 .
607 { stacktrace:
608 __kmalloc+0x11b/0x1b0
609 i915_gem_execbuffer2+0x6c/0x2c0 [i915]
610 drm_ioctl+0x349/0x670 [drm]
611 do_vfs_ioctl+0x2f0/0x4f0
612 SyS_ioctl+0x81/0xa0
613 system_call_fastpath+0x12/0x6a
614 } hitcount: 17726 bytes_req: 13944120 bytes_alloc: 19593808
615 { stacktrace:
616 __kmalloc+0x11b/0x1b0
617 load_elf_phdrs+0x76/0xa0
618 load_elf_binary+0x102/0x1650
619 search_binary_handler+0x97/0x1d0
620 do_execveat_common.isra.34+0x551/0x6e0
621 SyS_execve+0x3a/0x50
622 return_from_execve+0x0/0x23
623 } hitcount: 33348 bytes_req: 17152128 bytes_alloc: 20226048
624 { stacktrace:
625 kmem_cache_alloc_trace+0xeb/0x150
626 apparmor_file_alloc_security+0x27/0x40
627 security_file_alloc+0x16/0x20
628 get_empty_filp+0x93/0x1c0
629 path_openat+0x31/0x5f0
630 do_filp_open+0x3a/0x90
631 do_sys_open+0x128/0x220
632 SyS_open+0x1e/0x20
633 system_call_fastpath+0x12/0x6a
634 } hitcount: 4766422 bytes_req: 9532844 bytes_alloc: 38131376
635 { stacktrace:
636 __kmalloc+0x11b/0x1b0
637 seq_buf_alloc+0x1b/0x50
638 seq_read+0x2cc/0x370
639 proc_reg_read+0x3d/0x80
640 __vfs_read+0x28/0xe0
641 vfs_read+0x86/0x140
642 SyS_read+0x46/0xb0
643 system_call_fastpath+0x12/0x6a
644 } hitcount: 19133 bytes_req: 78368768 bytes_alloc: 78368768
645
646 Totals:
647 Hits: 6085872
648 Entries: 253
649 Dropped: 0
650
651 If you key a hist trigger on common_pid, in order for example to
652 gather and display sorted totals for each process, you can use the
653 special .execname modifier to display the executable names for the
654 processes in the table rather than raw pids. The example below
655 keeps a per-process sum of total bytes read:
656
657 # echo 'hist:key=common_pid.execname:val=count:sort=count.descending' > \
658 /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
659
660 # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/hist
661 # trigger info: hist:keys=common_pid.execname:vals=count:sort=count.descending:size=2048 [active]
662
663 { common_pid: gnome-terminal [ 3196] } hitcount: 280 count: 1093512
664 { common_pid: Xorg [ 1309] } hitcount: 525 count: 256640
665 { common_pid: compiz [ 2889] } hitcount: 59 count: 254400
666 { common_pid: bash [ 8710] } hitcount: 3 count: 66369
667 { common_pid: dbus-daemon-lau [ 8703] } hitcount: 49 count: 47739
668 { common_pid: irqbalance [ 1252] } hitcount: 27 count: 27648
669 { common_pid: 01ifupdown [ 8705] } hitcount: 3 count: 17216
670 { common_pid: dbus-daemon [ 772] } hitcount: 10 count: 12396
671 { common_pid: Socket Thread [ 8342] } hitcount: 11 count: 11264
672 { common_pid: nm-dhcp-client. [ 8701] } hitcount: 6 count: 7424
673 { common_pid: gmain [ 1315] } hitcount: 18 count: 6336
674 .
675 .
676 .
677 { common_pid: postgres [ 1892] } hitcount: 2 count: 32
678 { common_pid: postgres [ 1891] } hitcount: 2 count: 32
679 { common_pid: gmain [ 8704] } hitcount: 2 count: 32
680 { common_pid: upstart-dbus-br [ 2740] } hitcount: 21 count: 21
681 { common_pid: nm-dispatcher.a [ 8696] } hitcount: 1 count: 16
682 { common_pid: indicator-datet [ 2904] } hitcount: 1 count: 16
683 { common_pid: gdbus [ 2998] } hitcount: 1 count: 16
684 { common_pid: rtkit-daemon [ 2052] } hitcount: 1 count: 8
685 { common_pid: init [ 1] } hitcount: 2 count: 2
686
687 Totals:
688 Hits: 2116
689 Entries: 51
690 Dropped: 0
691
692 Similarly, if you key a hist trigger on syscall id, for example to
693 gather and display a list of systemwide syscall hits, you can use
694 the special .syscall modifier to display the syscall names rather
695 than raw ids. The example below keeps a running total of syscall
696 counts for the system during the run:
697
698 # echo 'hist:key=id.syscall:val=hitcount' > \
699 /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
700
701 # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
702 # trigger info: hist:keys=id.syscall:vals=hitcount:sort=hitcount:size=2048 [active]
703
704 { id: sys_fsync [ 74] } hitcount: 1
705 { id: sys_newuname [ 63] } hitcount: 1
706 { id: sys_prctl [157] } hitcount: 1
707 { id: sys_statfs [137] } hitcount: 1
708 { id: sys_symlink [ 88] } hitcount: 1
709 { id: sys_sendmmsg [307] } hitcount: 1
710 { id: sys_semctl [ 66] } hitcount: 1
711 { id: sys_readlink [ 89] } hitcount: 3
712 { id: sys_bind [ 49] } hitcount: 3
713 { id: sys_getsockname [ 51] } hitcount: 3
714 { id: sys_unlink [ 87] } hitcount: 3
715 { id: sys_rename [ 82] } hitcount: 4
716 { id: unknown_syscall [ 58] } hitcount: 4
717 { id: sys_connect [ 42] } hitcount: 4
718 { id: sys_getpid [ 39] } hitcount: 4
719 .
720 .
721 .
722 { id: sys_rt_sigprocmask [ 14] } hitcount: 952
723 { id: sys_futex [202] } hitcount: 1534
724 { id: sys_write [ 1] } hitcount: 2689
725 { id: sys_setitimer [ 38] } hitcount: 2797
726 { id: sys_read [ 0] } hitcount: 3202
727 { id: sys_select [ 23] } hitcount: 3773
728 { id: sys_writev [ 20] } hitcount: 4531
729 { id: sys_poll [ 7] } hitcount: 8314
730 { id: sys_recvmsg [ 47] } hitcount: 13738
731 { id: sys_ioctl [ 16] } hitcount: 21843
732
733 Totals:
734 Hits: 67612
735 Entries: 72
736 Dropped: 0
737
738 The syscall counts above provide a rough overall picture of system
739 call activity on the system; we can see for example that the most
740 popular system call on this system was the 'sys_ioctl' system call.
741
742 We can use 'compound' keys to refine that number and provide some
743 further insight as to which processes exactly contribute to the
744 overall ioctl count.
745
746 The command below keeps a hitcount for every unique combination of
747 system call id and pid - the end result is essentially a table
748 that keeps a per-pid sum of system call hits. The results are
749 sorted using the system call id as the primary key, and the
750 hitcount sum as the secondary key:
751
752 # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount' > \
753 /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
754
755 # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
756 # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 [active]
757
758 { id: sys_read [ 0], common_pid: rtkit-daemon [ 1877] } hitcount: 1
759 { id: sys_read [ 0], common_pid: gdbus [ 2976] } hitcount: 1
760 { id: sys_read [ 0], common_pid: console-kit-dae [ 3400] } hitcount: 1
761 { id: sys_read [ 0], common_pid: postgres [ 1865] } hitcount: 1
762 { id: sys_read [ 0], common_pid: deja-dup-monito [ 3543] } hitcount: 2
763 { id: sys_read [ 0], common_pid: NetworkManager [ 890] } hitcount: 2
764 { id: sys_read [ 0], common_pid: evolution-calen [ 3048] } hitcount: 2
765 { id: sys_read [ 0], common_pid: postgres [ 1864] } hitcount: 2
766 { id: sys_read [ 0], common_pid: nm-applet [ 3022] } hitcount: 2
767 { id: sys_read [ 0], common_pid: whoopsie [ 1212] } hitcount: 2
768 .
769 .
770 .
771 { id: sys_ioctl [ 16], common_pid: bash [ 8479] } hitcount: 1
772 { id: sys_ioctl [ 16], common_pid: bash [ 3472] } hitcount: 12
773 { id: sys_ioctl [ 16], common_pid: gnome-terminal [ 3199] } hitcount: 16
774 { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 1808
775 { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 5580
776 .
777 .
778 .
779 { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2690] } hitcount: 3
780 { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2688] } hitcount: 16
781 { id: sys_inotify_add_watch [254], common_pid: gmain [ 975] } hitcount: 2
782 { id: sys_inotify_add_watch [254], common_pid: gmain [ 3204] } hitcount: 4
783 { id: sys_inotify_add_watch [254], common_pid: gmain [ 2888] } hitcount: 4
784 { id: sys_inotify_add_watch [254], common_pid: gmain [ 3003] } hitcount: 4
785 { id: sys_inotify_add_watch [254], common_pid: gmain [ 2873] } hitcount: 4
786 { id: sys_inotify_add_watch [254], common_pid: gmain [ 3196] } hitcount: 6
787 { id: sys_openat [257], common_pid: java [ 2623] } hitcount: 2
788 { id: sys_eventfd2 [290], common_pid: ibus-ui-gtk3 [ 2760] } hitcount: 4
789 { id: sys_eventfd2 [290], common_pid: compiz [ 2994] } hitcount: 6
790
791 Totals:
792 Hits: 31536
793 Entries: 323
794 Dropped: 0
795
796 The above list does give us a breakdown of the ioctl syscall by
797 pid, but it also gives us quite a bit more than that, which we
798 don't really care about at the moment. Since we know the syscall
799 id for sys_ioctl (16, displayed next to the sys_ioctl name), we
800 can use that to filter out all the other syscalls:
801
802 # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount if id == 16' > \
803 /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
804
805 # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
806 # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 if id == 16 [active]
807
808 { id: sys_ioctl [ 16], common_pid: gmain [ 2769] } hitcount: 1
809 { id: sys_ioctl [ 16], common_pid: evolution-addre [ 8571] } hitcount: 1
810 { id: sys_ioctl [ 16], common_pid: gmain [ 3003] } hitcount: 1
811 { id: sys_ioctl [ 16], common_pid: gmain [ 2781] } hitcount: 1
812 { id: sys_ioctl [ 16], common_pid: gmain [ 2829] } hitcount: 1
813 { id: sys_ioctl [ 16], common_pid: bash [ 8726] } hitcount: 1
814 { id: sys_ioctl [ 16], common_pid: bash [ 8508] } hitcount: 1
815 { id: sys_ioctl [ 16], common_pid: gmain [ 2970] } hitcount: 1
816 { id: sys_ioctl [ 16], common_pid: gmain [ 2768] } hitcount: 1
817 .
818 .
819 .
820 { id: sys_ioctl [ 16], common_pid: pool [ 8559] } hitcount: 45
821 { id: sys_ioctl [ 16], common_pid: pool [ 8555] } hitcount: 48
822 { id: sys_ioctl [ 16], common_pid: pool [ 8551] } hitcount: 48
823 { id: sys_ioctl [ 16], common_pid: avahi-daemon [ 896] } hitcount: 66
824 { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 26674
825 { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 73443
826
827 Totals:
828 Hits: 101162
829 Entries: 103
830 Dropped: 0
831
832 The above output shows that 'compiz' and 'Xorg' are far and away
833 the heaviest ioctl callers (which might lead to questions about
834 whether they really need to be making all those calls and to
835 possible avenues for further investigation.)
836
837 The compound key examples used a key and a sum value (hitcount) to
838 sort the output, but we can just as easily use two keys instead.
839 Here's an example where we use a compound key composed of the the
840 common_pid and size event fields. Sorting with pid as the primary
841 key and 'size' as the secondary key allows us to display an
842 ordered summary of the recvfrom sizes, with counts, received by
843 each process:
844
845 # echo 'hist:key=common_pid.execname,size:val=hitcount:sort=common_pid,size' > \
846 /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/trigger
847
848 # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/hist
849 # trigger info: hist:keys=common_pid.execname,size:vals=hitcount:sort=common_pid.execname,size:size=2048 [active]
850
851 { common_pid: smbd [ 784], size: 4 } hitcount: 1
852 { common_pid: dnsmasq [ 1412], size: 4096 } hitcount: 672
853 { common_pid: postgres [ 1796], size: 1000 } hitcount: 6
854 { common_pid: postgres [ 1867], size: 1000 } hitcount: 10
855 { common_pid: bamfdaemon [ 2787], size: 28 } hitcount: 2
856 { common_pid: bamfdaemon [ 2787], size: 14360 } hitcount: 1
857 { common_pid: compiz [ 2994], size: 8 } hitcount: 1
858 { common_pid: compiz [ 2994], size: 20 } hitcount: 11
859 { common_pid: gnome-terminal [ 3199], size: 4 } hitcount: 2
860 { common_pid: firefox [ 8817], size: 4 } hitcount: 1
861 { common_pid: firefox [ 8817], size: 8 } hitcount: 5
862 { common_pid: firefox [ 8817], size: 588 } hitcount: 2
863 { common_pid: firefox [ 8817], size: 628 } hitcount: 1
864 { common_pid: firefox [ 8817], size: 6944 } hitcount: 1
865 { common_pid: firefox [ 8817], size: 408880 } hitcount: 2
866 { common_pid: firefox [ 8822], size: 8 } hitcount: 2
867 { common_pid: firefox [ 8822], size: 160 } hitcount: 2
868 { common_pid: firefox [ 8822], size: 320 } hitcount: 2
869 { common_pid: firefox [ 8822], size: 352 } hitcount: 1
870 .
871 .
872 .
873 { common_pid: pool [ 8923], size: 1960 } hitcount: 10
874 { common_pid: pool [ 8923], size: 2048 } hitcount: 10
875 { common_pid: pool [ 8924], size: 1960 } hitcount: 10
876 { common_pid: pool [ 8924], size: 2048 } hitcount: 10
877 { common_pid: pool [ 8928], size: 1964 } hitcount: 4
878 { common_pid: pool [ 8928], size: 1965 } hitcount: 2
879 { common_pid: pool [ 8928], size: 2048 } hitcount: 6
880 { common_pid: pool [ 8929], size: 1982 } hitcount: 1
881 { common_pid: pool [ 8929], size: 2048 } hitcount: 1
882
883 Totals:
884 Hits: 2016
885 Entries: 224
886 Dropped: 0
887
888 The above example also illustrates the fact that although a compound
889 key is treated as a single entity for hashing purposes, the sub-keys
890 it's composed of can be accessed independently.
891
892 The next example uses a string field as the hash key and
893 demonstrates how you can manually pause and continue a hist trigger.
894 In this example, we'll aggregate fork counts and don't expect a
895 large number of entries in the hash table, so we'll drop it to a
896 much smaller number, say 256:
897
898 # echo 'hist:key=child_comm:val=hitcount:size=256' > \
899 /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
900
901 # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
902 # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active]
903
904 { child_comm: dconf worker } hitcount: 1
905 { child_comm: ibus-daemon } hitcount: 1
906 { child_comm: whoopsie } hitcount: 1
907 { child_comm: smbd } hitcount: 1
908 { child_comm: gdbus } hitcount: 1
909 { child_comm: kthreadd } hitcount: 1
910 { child_comm: dconf worker } hitcount: 1
911 { child_comm: evolution-alarm } hitcount: 2
912 { child_comm: Socket Thread } hitcount: 2
913 { child_comm: postgres } hitcount: 2
914 { child_comm: bash } hitcount: 3
915 { child_comm: compiz } hitcount: 3
916 { child_comm: evolution-sourc } hitcount: 4
917 { child_comm: dhclient } hitcount: 4
918 { child_comm: pool } hitcount: 5
919 { child_comm: nm-dispatcher.a } hitcount: 8
920 { child_comm: firefox } hitcount: 8
921 { child_comm: dbus-daemon } hitcount: 8
922 { child_comm: glib-pacrunner } hitcount: 10
923 { child_comm: evolution } hitcount: 23
924
925 Totals:
926 Hits: 89
927 Entries: 20
928 Dropped: 0
929
930 If we want to pause the hist trigger, we can simply append :pause to
931 the command that started the trigger. Notice that the trigger info
932 displays as [paused]:
933
934 # echo 'hist:key=child_comm:val=hitcount:size=256:pause' >> \
935 /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
936
937 # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
938 # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [paused]
939
940 { child_comm: dconf worker } hitcount: 1
941 { child_comm: kthreadd } hitcount: 1
942 { child_comm: dconf worker } hitcount: 1
943 { child_comm: gdbus } hitcount: 1
944 { child_comm: ibus-daemon } hitcount: 1
945 { child_comm: Socket Thread } hitcount: 2
946 { child_comm: evolution-alarm } hitcount: 2
947 { child_comm: smbd } hitcount: 2
948 { child_comm: bash } hitcount: 3
949 { child_comm: whoopsie } hitcount: 3
950 { child_comm: compiz } hitcount: 3
951 { child_comm: evolution-sourc } hitcount: 4
952 { child_comm: pool } hitcount: 5
953 { child_comm: postgres } hitcount: 6
954 { child_comm: firefox } hitcount: 8
955 { child_comm: dhclient } hitcount: 10
956 { child_comm: emacs } hitcount: 12
957 { child_comm: dbus-daemon } hitcount: 20
958 { child_comm: nm-dispatcher.a } hitcount: 20
959 { child_comm: evolution } hitcount: 35
960 { child_comm: glib-pacrunner } hitcount: 59
961
962 Totals:
963 Hits: 199
964 Entries: 21
965 Dropped: 0
966
967 To manually continue having the trigger aggregate events, append
968 :cont instead. Notice that the trigger info displays as [active]
969 again, and the data has changed:
970
971 # echo 'hist:key=child_comm:val=hitcount:size=256:cont' >> \
972 /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
973
974 # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
975 # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active]
976
977 { child_comm: dconf worker } hitcount: 1
978 { child_comm: dconf worker } hitcount: 1
979 { child_comm: kthreadd } hitcount: 1
980 { child_comm: gdbus } hitcount: 1
981 { child_comm: ibus-daemon } hitcount: 1
982 { child_comm: Socket Thread } hitcount: 2
983 { child_comm: evolution-alarm } hitcount: 2
984 { child_comm: smbd } hitcount: 2
985 { child_comm: whoopsie } hitcount: 3
986 { child_comm: compiz } hitcount: 3
987 { child_comm: evolution-sourc } hitcount: 4
988 { child_comm: bash } hitcount: 5
989 { child_comm: pool } hitcount: 5
990 { child_comm: postgres } hitcount: 6
991 { child_comm: firefox } hitcount: 8
992 { child_comm: dhclient } hitcount: 11
993 { child_comm: emacs } hitcount: 12
994 { child_comm: dbus-daemon } hitcount: 22
995 { child_comm: nm-dispatcher.a } hitcount: 22
996 { child_comm: evolution } hitcount: 35
997 { child_comm: glib-pacrunner } hitcount: 59
998
999 Totals:
1000 Hits: 206
1001 Entries: 21
1002 Dropped: 0
1003
1004 The previous example showed how to start and stop a hist trigger by
1005 appending 'pause' and 'continue' to the hist trigger command. A
1006 hist trigger can also be started in a paused state by initially
1007 starting the trigger with ':pause' appended. This allows you to
1008 start the trigger only when you're ready to start collecting data
1009 and not before. For example, you could start the trigger in a
1010 paused state, then unpause it and do something you want to measure,
1011 then pause the trigger again when done.
1012
1013 Of course, doing this manually can be difficult and error-prone, but
1014 it is possible to automatically start and stop a hist trigger based
1015 on some condition, via the enable_hist and disable_hist triggers.
1016
1017 For example, suppose we wanted to take a look at the relative
1018 weights in terms of skb length for each callpath that leads to a
1019 netif_receieve_skb event when downloading a decent-sized file using
1020 wget.
1021
1022 First we set up an initially paused stacktrace trigger on the
1023 netif_receive_skb event:
1024
1025 # echo 'hist:key=stacktrace:vals=len:pause' > \
1026 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1027
1028 Next, we set up an 'enable_hist' trigger on the sched_process_exec
1029 event, with an 'if filename==/usr/bin/wget' filter. The effect of
1030 this new trigger is that it will 'unpause' the hist trigger we just
1031 set up on netif_receive_skb if and only if it sees a
1032 sched_process_exec event with a filename of '/usr/bin/wget'. When
1033 that happens, all netif_receive_skb events are aggregated into a
1034 hash table keyed on stacktrace:
1035
1036 # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \
1037 /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
1038
1039 The aggregation continues until the netif_receive_skb is paused
1040 again, which is what the following disable_hist event does by
1041 creating a similar setup on the sched_process_exit event, using the
1042 filter 'comm==wget':
1043
1044 # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \
1045 /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
1046
1047 Whenever a process exits and the comm field of the disable_hist
1048 trigger filter matches 'comm==wget', the netif_receive_skb hist
1049 trigger is disabled.
1050
1051 The overall effect is that netif_receive_skb events are aggregated
1052 into the hash table for only the duration of the wget. Executing a
1053 wget command and then listing the 'hist' file will display the
1054 output generated by the wget command:
1055
1056 $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz
1057
1058 # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist
1059 # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused]
1060
1061 { stacktrace:
1062 __netif_receive_skb_core+0x46d/0x990
1063 __netif_receive_skb+0x18/0x60
1064 netif_receive_skb_internal+0x23/0x90
1065 napi_gro_receive+0xc8/0x100
1066 ieee80211_deliver_skb+0xd6/0x270 [mac80211]
1067 ieee80211_rx_handlers+0xccf/0x22f0 [mac80211]
1068 ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211]
1069 ieee80211_rx+0x31d/0x900 [mac80211]
1070 iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm]
1071 iwl_rx_dispatch+0x8e/0xf0 [iwldvm]
1072 iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi]
1073 irq_thread_fn+0x20/0x50
1074 irq_thread+0x11f/0x150
1075 kthread+0xd2/0xf0
1076 ret_from_fork+0x42/0x70
1077 } hitcount: 85 len: 28884
1078 { stacktrace:
1079 __netif_receive_skb_core+0x46d/0x990
1080 __netif_receive_skb+0x18/0x60
1081 netif_receive_skb_internal+0x23/0x90
1082 napi_gro_complete+0xa4/0xe0
1083 dev_gro_receive+0x23a/0x360
1084 napi_gro_receive+0x30/0x100
1085 ieee80211_deliver_skb+0xd6/0x270 [mac80211]
1086 ieee80211_rx_handlers+0xccf/0x22f0 [mac80211]
1087 ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211]
1088 ieee80211_rx+0x31d/0x900 [mac80211]
1089 iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm]
1090 iwl_rx_dispatch+0x8e/0xf0 [iwldvm]
1091 iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi]
1092 irq_thread_fn+0x20/0x50
1093 irq_thread+0x11f/0x150
1094 kthread+0xd2/0xf0
1095 } hitcount: 98 len: 664329
1096 { stacktrace:
1097 __netif_receive_skb_core+0x46d/0x990
1098 __netif_receive_skb+0x18/0x60
1099 process_backlog+0xa8/0x150
1100 net_rx_action+0x15d/0x340
1101 __do_softirq+0x114/0x2c0
1102 do_softirq_own_stack+0x1c/0x30
1103 do_softirq+0x65/0x70
1104 __local_bh_enable_ip+0xb5/0xc0
1105 ip_finish_output+0x1f4/0x840
1106 ip_output+0x6b/0xc0
1107 ip_local_out_sk+0x31/0x40
1108 ip_send_skb+0x1a/0x50
1109 udp_send_skb+0x173/0x2a0
1110 udp_sendmsg+0x2bf/0x9f0
1111 inet_sendmsg+0x64/0xa0
1112 sock_sendmsg+0x3d/0x50
1113 } hitcount: 115 len: 13030
1114 { stacktrace:
1115 __netif_receive_skb_core+0x46d/0x990
1116 __netif_receive_skb+0x18/0x60
1117 netif_receive_skb_internal+0x23/0x90
1118 napi_gro_complete+0xa4/0xe0
1119 napi_gro_flush+0x6d/0x90
1120 iwl_pcie_irq_handler+0x92a/0x12f0 [iwlwifi]
1121 irq_thread_fn+0x20/0x50
1122 irq_thread+0x11f/0x150
1123 kthread+0xd2/0xf0
1124 ret_from_fork+0x42/0x70
1125 } hitcount: 934 len: 5512212
1126
1127 Totals:
1128 Hits: 1232
1129 Entries: 4
1130 Dropped: 0
1131
1132 The above shows all the netif_receive_skb callpaths and their total
1133 lengths for the duration of the wget command.
1134
1135 The 'clear' hist trigger param can be used to clear the hash table.
1136 Suppose we wanted to try another run of the previous example but
1137 this time also wanted to see the complete list of events that went
1138 into the histogram. In order to avoid having to set everything up
1139 again, we can just clear the histogram first:
1140
1141 # echo 'hist:key=stacktrace:vals=len:clear' >> \
1142 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1143
1144 Just to verify that it is in fact cleared, here's what we now see in
1145 the hist file:
1146
1147 # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist
1148 # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused]
1149
1150 Totals:
1151 Hits: 0
1152 Entries: 0
1153 Dropped: 0
1154
1155 Since we want to see the detailed list of every netif_receive_skb
1156 event occurring during the new run, which are in fact the same
1157 events being aggregated into the hash table, we add some additional
1158 'enable_event' events to the triggering sched_process_exec and
1159 sched_process_exit events as such:
1160
1161 # echo 'enable_event:net:netif_receive_skb if filename==/usr/bin/wget' > \
1162 /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
1163
1164 # echo 'disable_event:net:netif_receive_skb if comm==wget' > \
1165 /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
1166
1167 If you read the trigger files for the sched_process_exec and
1168 sched_process_exit triggers, you should see two triggers for each:
1169 one enabling/disabling the hist aggregation and the other
1170 enabling/disabling the logging of events:
1171
1172 # cat /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
1173 enable_event:net:netif_receive_skb:unlimited if filename==/usr/bin/wget
1174 enable_hist:net:netif_receive_skb:unlimited if filename==/usr/bin/wget
1175
1176 # cat /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
1177 enable_event:net:netif_receive_skb:unlimited if comm==wget
1178 disable_hist:net:netif_receive_skb:unlimited if comm==wget
1179
1180 In other words, whenever either of the sched_process_exec or
1181 sched_process_exit events is hit and matches 'wget', it enables or
1182 disables both the histogram and the event log, and what you end up
1183 with is a hash table and set of events just covering the specified
1184 duration. Run the wget command again:
1185
1186 $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz
1187
1188 Displaying the 'hist' file should show something similar to what you
1189 saw in the last run, but this time you should also see the
1190 individual events in the trace file:
1191
1192 # cat /sys/kernel/debug/tracing/trace
1193
1194 # tracer: nop
1195 #
1196 # entries-in-buffer/entries-written: 183/1426 #P:4
1197 #
1198 # _-----=> irqs-off
1199 # / _----=> need-resched
1200 # | / _---=> hardirq/softirq
1201 # || / _--=> preempt-depth
1202 # ||| / delay
1203 # TASK-PID CPU# |||| TIMESTAMP FUNCTION
1204 # | | | |||| | |
1205 wget-15108 [000] ..s1 31769.606929: netif_receive_skb: dev=lo skbaddr=ffff88009c353100 len=60
1206 wget-15108 [000] ..s1 31769.606999: netif_receive_skb: dev=lo skbaddr=ffff88009c353200 len=60
1207 dnsmasq-1382 [000] ..s1 31769.677652: netif_receive_skb: dev=lo skbaddr=ffff88009c352b00 len=130
1208 dnsmasq-1382 [000] ..s1 31769.685917: netif_receive_skb: dev=lo skbaddr=ffff88009c352200 len=138
1209 ##### CPU 2 buffer started ####
1210 irq/29-iwlwifi-559 [002] ..s. 31772.031529: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433d00 len=2948
1211 irq/29-iwlwifi-559 [002] ..s. 31772.031572: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432200 len=1500
1212 irq/29-iwlwifi-559 [002] ..s. 31772.032196: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433100 len=2948
1213 irq/29-iwlwifi-559 [002] ..s. 31772.032761: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433000 len=2948
1214 irq/29-iwlwifi-559 [002] ..s. 31772.033220: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432e00 len=1500
1215 .
1216 .
1217 .
1218
1219 The following example demonstrates how multiple hist triggers can be
1220 attached to a given event. This capability can be useful for
1221 creating a set of different summaries derived from the same set of
1222 events, or for comparing the effects of different filters, among
1223 other things.
1224
1225 # echo 'hist:keys=skbaddr.hex:vals=len if len < 0' >> \
1226 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1227 # echo 'hist:keys=skbaddr.hex:vals=len if len > 4096' >> \
1228 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1229 # echo 'hist:keys=skbaddr.hex:vals=len if len == 256' >> \
1230 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1231 # echo 'hist:keys=skbaddr.hex:vals=len' >> \
1232 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1233 # echo 'hist:keys=len:vals=common_preempt_count' >> \
1234 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1235
1236 The above set of commands create four triggers differing only in
1237 their filters, along with a completely different though fairly
1238 nonsensical trigger. Note that in order to append multiple hist
1239 triggers to the same file, you should use the '>>' operator to
1240 append them ('>' will also add the new hist trigger, but will remove
1241 any existing hist triggers beforehand).
1242
1243 Displaying the contents of the 'hist' file for the event shows the
1244 contents of all five histograms:
1245
1246 # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist
1247
1248 # event histogram
1249 #
1250 # trigger info: hist:keys=len:vals=hitcount,common_preempt_count:sort=hitcount:size=2048 [active]
1251 #
1252
1253 { len: 176 } hitcount: 1 common_preempt_count: 0
1254 { len: 223 } hitcount: 1 common_preempt_count: 0
1255 { len: 4854 } hitcount: 1 common_preempt_count: 0
1256 { len: 395 } hitcount: 1 common_preempt_count: 0
1257 { len: 177 } hitcount: 1 common_preempt_count: 0
1258 { len: 446 } hitcount: 1 common_preempt_count: 0
1259 { len: 1601 } hitcount: 1 common_preempt_count: 0
1260 .
1261 .
1262 .
1263 { len: 1280 } hitcount: 66 common_preempt_count: 0
1264 { len: 116 } hitcount: 81 common_preempt_count: 40
1265 { len: 708 } hitcount: 112 common_preempt_count: 0
1266 { len: 46 } hitcount: 221 common_preempt_count: 0
1267 { len: 1264 } hitcount: 458 common_preempt_count: 0
1268
1269 Totals:
1270 Hits: 1428
1271 Entries: 147
1272 Dropped: 0
1273
1274
1275 # event histogram
1276 #
1277 # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active]
1278 #
1279
1280 { skbaddr: ffff8800baee5e00 } hitcount: 1 len: 130
1281 { skbaddr: ffff88005f3d5600 } hitcount: 1 len: 1280
1282 { skbaddr: ffff88005f3d4900 } hitcount: 1 len: 1280
1283 { skbaddr: ffff88009fed6300 } hitcount: 1 len: 115
1284 { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 115
1285 { skbaddr: ffff88008cdb1900 } hitcount: 1 len: 46
1286 { skbaddr: ffff880064b5ef00 } hitcount: 1 len: 118
1287 { skbaddr: ffff880044e3c700 } hitcount: 1 len: 60
1288 { skbaddr: ffff880100065900 } hitcount: 1 len: 46
1289 { skbaddr: ffff8800d46bd500 } hitcount: 1 len: 116
1290 { skbaddr: ffff88005f3d5f00 } hitcount: 1 len: 1280
1291 { skbaddr: ffff880100064700 } hitcount: 1 len: 365
1292 { skbaddr: ffff8800badb6f00 } hitcount: 1 len: 60
1293 .
1294 .
1295 .
1296 { skbaddr: ffff88009fe0be00 } hitcount: 27 len: 24677
1297 { skbaddr: ffff88009fe0a400 } hitcount: 27 len: 23052
1298 { skbaddr: ffff88009fe0b700 } hitcount: 31 len: 25589
1299 { skbaddr: ffff88009fe0b600 } hitcount: 32 len: 27326
1300 { skbaddr: ffff88006a462800 } hitcount: 68 len: 71678
1301 { skbaddr: ffff88006a463700 } hitcount: 70 len: 72678
1302 { skbaddr: ffff88006a462b00 } hitcount: 71 len: 77589
1303 { skbaddr: ffff88006a463600 } hitcount: 73 len: 71307
1304 { skbaddr: ffff88006a462200 } hitcount: 81 len: 81032
1305
1306 Totals:
1307 Hits: 1451
1308 Entries: 318
1309 Dropped: 0
1310
1311
1312 # event histogram
1313 #
1314 # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len == 256 [active]
1315 #
1316
1317
1318 Totals:
1319 Hits: 0
1320 Entries: 0
1321 Dropped: 0
1322
1323
1324 # event histogram
1325 #
1326 # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len > 4096 [active]
1327 #
1328
1329 { skbaddr: ffff88009fd2c300 } hitcount: 1 len: 7212
1330 { skbaddr: ffff8800d2bcce00 } hitcount: 1 len: 7212
1331 { skbaddr: ffff8800d2bcd700 } hitcount: 1 len: 7212
1332 { skbaddr: ffff8800d2bcda00 } hitcount: 1 len: 21492
1333 { skbaddr: ffff8800ae2e2d00 } hitcount: 1 len: 7212
1334 { skbaddr: ffff8800d2bcdb00 } hitcount: 1 len: 7212
1335 { skbaddr: ffff88006a4df500 } hitcount: 1 len: 4854
1336 { skbaddr: ffff88008ce47b00 } hitcount: 1 len: 18636
1337 { skbaddr: ffff8800ae2e2200 } hitcount: 1 len: 12924
1338 { skbaddr: ffff88005f3e1000 } hitcount: 1 len: 4356
1339 { skbaddr: ffff8800d2bcdc00 } hitcount: 2 len: 24420
1340 { skbaddr: ffff8800d2bcc200 } hitcount: 2 len: 12996
1341
1342 Totals:
1343 Hits: 14
1344 Entries: 12
1345 Dropped: 0
1346
1347
1348 # event histogram
1349 #
1350 # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len < 0 [active]
1351 #
1352
1353
1354 Totals:
1355 Hits: 0
1356 Entries: 0
1357 Dropped: 0
1358
1359 Named triggers can be used to have triggers share a common set of
1360 histogram data. This capability is mostly useful for combining the
1361 output of events generated by tracepoints contained inside inline
1362 functions, but names can be used in a hist trigger on any event.
1363 For example, these two triggers when hit will update the same 'len'
1364 field in the shared 'foo' histogram data:
1365
1366 # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \
1367 /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
1368 # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \
1369 /sys/kernel/debug/tracing/events/net/netif_rx/trigger
1370
1371 You can see that they're updating common histogram data by reading
1372 each event's hist files at the same time:
1373
1374 # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist;
1375 cat /sys/kernel/debug/tracing/events/net/netif_rx/hist
1376
1377 # event histogram
1378 #
1379 # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active]
1380 #
1381
1382 { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46
1383 { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76
1384 { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46
1385 { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468
1386 { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46
1387 { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52
1388 { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168
1389 { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46
1390 { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260
1391 { skbaddr: ffff880064505000 } hitcount: 1 len: 46
1392 { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32
1393 { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46
1394 { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44
1395 { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168
1396 { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40
1397 { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40
1398 { skbaddr: ffff880064505f00 } hitcount: 1 len: 174
1399 { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160
1400 { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76
1401 { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46
1402 { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32
1403 { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46
1404 { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988
1405 { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46
1406 { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44
1407 { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676
1408 { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107
1409 { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92
1410 { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142
1411 { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220
1412 { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92
1413 { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92
1414 { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675
1415 { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138
1416 { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138
1417 { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184
1418 { skbaddr: ffff880064504400 } hitcount: 4 len: 184
1419 { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184
1420 { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230
1421 { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196
1422 { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276
1423 { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276
1424
1425 Totals:
1426 Hits: 81
1427 Entries: 42
1428 Dropped: 0
1429 # event histogram
1430 #
1431 # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active]
1432 #
1433
1434 { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46
1435 { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76
1436 { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46
1437 { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468
1438 { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46
1439 { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52
1440 { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168
1441 { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46
1442 { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260
1443 { skbaddr: ffff880064505000 } hitcount: 1 len: 46
1444 { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32
1445 { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46
1446 { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44
1447 { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168
1448 { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40
1449 { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40
1450 { skbaddr: ffff880064505f00 } hitcount: 1 len: 174
1451 { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160
1452 { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76
1453 { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46
1454 { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32
1455 { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46
1456 { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988
1457 { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46
1458 { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44
1459 { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676
1460 { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107
1461 { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92
1462 { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142
1463 { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220
1464 { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92
1465 { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92
1466 { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675
1467 { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138
1468 { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138
1469 { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184
1470 { skbaddr: ffff880064504400 } hitcount: 4 len: 184
1471 { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184
1472 { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230
1473 { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196
1474 { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276
1475 { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276
1476
1477 Totals:
1478 Hits: 81
1479 Entries: 42
1480 Dropped: 0
1481
1482 And here's an example that shows how to combine histogram data from
1483 any two events even if they don't share any 'compatible' fields
1484 other than 'hitcount' and 'stacktrace'. These commands create a
1485 couple of triggers named 'bar' using those fields:
1486
1487 # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \
1488 /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
1489 # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \
1490 /sys/kernel/debug/tracing/events/net/netif_rx/trigger
1491
1492 And displaying the output of either shows some interesting if
1493 somewhat confusing output:
1494
1495 # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
1496 # cat /sys/kernel/debug/tracing/events/net/netif_rx/hist
1497
1498 # event histogram
1499 #
1500 # trigger info: hist:name=bar:keys=stacktrace:vals=hitcount:sort=hitcount:size=2048 [active]
1501 #
1502
1503 { stacktrace:
1504 _do_fork+0x18e/0x330
1505 kernel_thread+0x29/0x30
1506 kthreadd+0x154/0x1b0
1507 ret_from_fork+0x3f/0x70
1508 } hitcount: 1
1509 { stacktrace:
1510 netif_rx_internal+0xb2/0xd0
1511 netif_rx_ni+0x20/0x70
1512 dev_loopback_xmit+0xaa/0xd0
1513 ip_mc_output+0x126/0x240
1514 ip_local_out_sk+0x31/0x40
1515 igmp_send_report+0x1e9/0x230
1516 igmp_timer_expire+0xe9/0x120
1517 call_timer_fn+0x39/0xf0
1518 run_timer_softirq+0x1e1/0x290
1519 __do_softirq+0xfd/0x290
1520 irq_exit+0x98/0xb0
1521 smp_apic_timer_interrupt+0x4a/0x60
1522 apic_timer_interrupt+0x6d/0x80
1523 cpuidle_enter+0x17/0x20
1524 call_cpuidle+0x3b/0x60
1525 cpu_startup_entry+0x22d/0x310
1526 } hitcount: 1
1527 { stacktrace:
1528 netif_rx_internal+0xb2/0xd0
1529 netif_rx_ni+0x20/0x70
1530 dev_loopback_xmit+0xaa/0xd0
1531 ip_mc_output+0x17f/0x240
1532 ip_local_out_sk+0x31/0x40
1533 ip_send_skb+0x1a/0x50
1534 udp_send_skb+0x13e/0x270
1535 udp_sendmsg+0x2bf/0x980
1536 inet_sendmsg+0x67/0xa0
1537 sock_sendmsg+0x38/0x50
1538 SYSC_sendto+0xef/0x170
1539 SyS_sendto+0xe/0x10
1540 entry_SYSCALL_64_fastpath+0x12/0x6a
1541 } hitcount: 2
1542 { stacktrace:
1543 netif_rx_internal+0xb2/0xd0
1544 netif_rx+0x1c/0x60
1545 loopback_xmit+0x6c/0xb0
1546 dev_hard_start_xmit+0x219/0x3a0
1547 __dev_queue_xmit+0x415/0x4f0
1548 dev_queue_xmit_sk+0x13/0x20
1549 ip_finish_output2+0x237/0x340
1550 ip_finish_output+0x113/0x1d0
1551 ip_output+0x66/0xc0
1552 ip_local_out_sk+0x31/0x40
1553 ip_send_skb+0x1a/0x50
1554 udp_send_skb+0x16d/0x270
1555 udp_sendmsg+0x2bf/0x980
1556 inet_sendmsg+0x67/0xa0
1557 sock_sendmsg+0x38/0x50
1558 ___sys_sendmsg+0x14e/0x270
1559 } hitcount: 76
1560 { stacktrace:
1561 netif_rx_internal+0xb2/0xd0
1562 netif_rx+0x1c/0x60
1563 loopback_xmit+0x6c/0xb0
1564 dev_hard_start_xmit+0x219/0x3a0
1565 __dev_queue_xmit+0x415/0x4f0
1566 dev_queue_xmit_sk+0x13/0x20
1567 ip_finish_output2+0x237/0x340
1568 ip_finish_output+0x113/0x1d0
1569 ip_output+0x66/0xc0
1570 ip_local_out_sk+0x31/0x40
1571 ip_send_skb+0x1a/0x50
1572 udp_send_skb+0x16d/0x270
1573 udp_sendmsg+0x2bf/0x980
1574 inet_sendmsg+0x67/0xa0
1575 sock_sendmsg+0x38/0x50
1576 ___sys_sendmsg+0x269/0x270
1577 } hitcount: 77
1578 { stacktrace:
1579 netif_rx_internal+0xb2/0xd0
1580 netif_rx+0x1c/0x60
1581 loopback_xmit+0x6c/0xb0
1582 dev_hard_start_xmit+0x219/0x3a0
1583 __dev_queue_xmit+0x415/0x4f0
1584 dev_queue_xmit_sk+0x13/0x20
1585 ip_finish_output2+0x237/0x340
1586 ip_finish_output+0x113/0x1d0
1587 ip_output+0x66/0xc0
1588 ip_local_out_sk+0x31/0x40
1589 ip_send_skb+0x1a/0x50
1590 udp_send_skb+0x16d/0x270
1591 udp_sendmsg+0x2bf/0x980
1592 inet_sendmsg+0x67/0xa0
1593 sock_sendmsg+0x38/0x50
1594 SYSC_sendto+0xef/0x170
1595 } hitcount: 88
1596 { stacktrace:
1597 _do_fork+0x18e/0x330
1598 SyS_clone+0x19/0x20
1599 entry_SYSCALL_64_fastpath+0x12/0x6a
1600 } hitcount: 244
1601
1602 Totals:
1603 Hits: 489
1604 Entries: 7
1605 Dropped: 0
033cbcee 1606
033cbcee
TZ		 16072.2 Inter-event hist triggers
1608-----------------------------
1609
1610Inter-event hist triggers are hist triggers that combine values from
1611one or more other events and create a histogram using that data. Data
1612from an inter-event histogram can in turn become the source for
1613further combined histograms, thus providing a chain of related
1614histograms, which is important for some applications.
1615
1616The most important example of an inter-event quantity that can be used
1617in this manner is latency, which is simply a difference in timestamps
1618between two events. Although latency is the most important
1619inter-event quantity, note that because the support is completely
1620general across the trace event subsystem, any event field can be used
1621in an inter-event quantity.
1622
1623An example of a histogram that combines data from other histograms
1624into a useful chain would be a 'wakeupswitch latency' histogram that
1625combines a 'wakeup latency' histogram and a 'switch latency'
1626histogram.
1627
1628Normally, a hist trigger specification consists of a (possibly
1629compound) key along with one or more numeric values, which are
1630continually updated sums associated with that key. A histogram
1631specification in this case consists of individual key and value
1632specifications that refer to trace event fields associated with a
1633single event type.
1634
1635The inter-event hist trigger extension allows fields from multiple
1636events to be referenced and combined into a multi-event histogram
1637specification. In support of this overall goal, a few enabling
1638features have been added to the hist trigger support:
1639
1640 - In order to compute an inter-event quantity, a value from one
1641 event needs to saved and then referenced from another event. This
1642 requires the introduction of support for histogram 'variables'.
1643
1644 - The computation of inter-event quantities and their combination
1645 require some minimal amount of support for applying simple
1646 expressions to variables (+ and -).
1647
1648 - A histogram consisting of inter-event quantities isn't logically a
1649 histogram on either event (so having the 'hist' file for either
1650 event host the histogram output doesn't really make sense). To
1651 address the idea that the histogram is associated with a
1652 combination of events, support is added allowing the creation of
1653 'synthetic' events that are events derived from other events.
1654 These synthetic events are full-fledged events just like any other
1655 and can be used as such, as for instance to create the
1656 'combination' histograms mentioned previously.
1657
1658 - A set of 'actions' can be associated with histogram entries -
1659 these can be used to generate the previously mentioned synthetic
1660 events, but can also be used for other purposes, such as for
1661 example saving context when a 'max' latency has been hit.
1662
1663 - Trace events don't have a 'timestamp' associated with them, but
1664 there is an implicit timestamp saved along with an event in the
1665 underlying ftrace ring buffer. This timestamp is now exposed as a
1666 a synthetic field named 'common_timestamp' which can be used in
1667 histograms as if it were any other event field; it isn't an actual
1668 field in the trace format but rather is a synthesized value that
1669 nonetheless can be used as if it were an actual field. By default
1670 it is in units of nanoseconds; appending '.usecs' to a
1671 common_timestamp field changes the units to microseconds.
1672
a4072fe8
TZ		 1673A note on inter-event timestamps: If common_timestamp is used in a
1674histogram, the trace buffer is automatically switched over to using
1675absolute timestamps and the "global" trace clock, in order to avoid
1676bogus timestamp differences with other clocks that aren't coherent
1677across CPUs. This can be overridden by specifying one of the other
1678trace clocks instead, using the "clock=XXX" hist trigger attribute,
1679where XXX is any of the clocks listed in the tracing/trace_clock
1680pseudo-file.
1681
1682These features are described in more detail in the following sections.
033cbcee
TZ		 1683
16842.2.1 Histogram Variables
1685-------------------------
1686
1687Variables are simply named locations used for saving and retrieving
1688values between matching events. A 'matching' event is defined as an
1689event that has a matching key - if a variable is saved for a histogram
1690entry corresponding to that key, any subsequent event with a matching
1691key can access that variable.
1692
1693A variable's value is normally available to any subsequent event until
1694it is set to something else by a subsequent event. The one exception
1695to that rule is that any variable used in an expression is essentially
1696'read-once' - once it's used by an expression in a subsequent event,
1697it's reset to its 'unset' state, which means it can't be used again
1698unless it's set again. This ensures not only that an event doesn't
1699use an uninitialized variable in a calculation, but that that variable
1700is used only once and not for any unrelated subsequent match.
1701
1702The basic syntax for saving a variable is to simply prefix a unique
1703variable name not corresponding to any keyword along with an '=' sign
1704to any event field.
1705
1706Either keys or values can be saved and retrieved in this way. This
1707creates a variable named 'ts0' for a histogram entry with the key
1708'next_pid':
1709
1710 # echo 'hist:keys=next_pid:vals=$ts0:ts0=common_timestamp ... >> \
1711 event/trigger
1712
1713The ts0 variable can be accessed by any subsequent event having the
1714same pid as 'next_pid'.
1715
1716Variable references are formed by prepending the variable name with
1717the '$' sign. Thus for example, the ts0 variable above would be
1718referenced as '$ts0' in expressions.
1719
1720Because 'vals=' is used, the common_timestamp variable value above
1721will also be summed as a normal histogram value would (though for a
1722timestamp it makes little sense).
1723
1724The below shows that a key value can also be saved in the same way:
1725
1726 # echo 'hist:timer_pid=common_pid:key=timer_pid ...' >> event/trigger
1727
1728If a variable isn't a key variable or prefixed with 'vals=', the
1729associated event field will be saved in a variable but won't be summed
1730as a value:
1731
064f35a9 1732 # echo 'hist:keys=next_pid:ts1=common_timestamp ...' >> event/trigger
033cbcee
TZ		 1733
1734Multiple variables can be assigned at the same time. The below would
1735result in both ts0 and b being created as variables, with both
1736common_timestamp and field1 additionally being summed as values:
1737
064f35a9 1738 # echo 'hist:keys=pid:vals=$ts0,$b:ts0=common_timestamp,b=field1 ...' >> \
033cbcee
TZ		 1739 event/trigger
1740
1741Note that variable assignments can appear either preceding or
1742following their use. The command below behaves identically to the
1743command above:
1744
064f35a9 1745 # echo 'hist:keys=pid:ts0=common_timestamp,b=field1:vals=$ts0,$b ...' >> \
033cbcee
TZ		 1746 event/trigger
1747
1748Any number of variables not bound to a 'vals=' prefix can also be
1749assigned by simply separating them with colons. Below is the same
1750thing but without the values being summed in the histogram:
1751
064f35a9 1752 # echo 'hist:keys=pid:ts0=common_timestamp:b=field1 ...' >> event/trigger
033cbcee
TZ		 1753
1754Variables set as above can be referenced and used in expressions on
1755another event.
1756
1757For example, here's how a latency can be calculated:
1758
064f35a9
JFG		 1759 # echo 'hist:keys=pid,prio:ts0=common_timestamp ...' >> event1/trigger
1760 # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ...' >> event2/trigger
033cbcee
TZ		 1761
1762In the first line above, the event's timetamp is saved into the
1763variable ts0. In the next line, ts0 is subtracted from the second
1764event's timestamp to produce the latency, which is then assigned into
1765yet another variable, 'wakeup_lat'. The hist trigger below in turn
1766makes use of the wakeup_lat variable to compute a combined latency
1767using the same key and variable from yet another event:
1768
064f35a9 1769 # echo 'hist:key=pid:wakeupswitch_lat=$wakeup_lat+$switchtime_lat ...' >> event3/trigger
033cbcee
TZ		 1770
17712.2.2 Synthetic Events
1772----------------------
1773
1774Synthetic events are user-defined events generated from hist trigger
1775variables or fields associated with one or more other events. Their
1776purpose is to provide a mechanism for displaying data spanning
1777multiple events consistent with the existing and already familiar
1778usage for normal events.
1779
1780To define a synthetic event, the user writes a simple specification
1781consisting of the name of the new event along with one or more
1782variables and their types, which can be any valid field type,
1783separated by semicolons, to the tracing/synthetic_events file.
1784
1785For instance, the following creates a new event named 'wakeup_latency'
1786with 3 fields: lat, pid, and prio. Each of those fields is simply a
1787variable reference to a variable on another event:
1788
1789 # echo 'wakeup_latency \
1790 u64 lat; \
1791 pid_t pid; \
1792 int prio' >> \
1793 /sys/kernel/debug/tracing/synthetic_events
1794
1795Reading the tracing/synthetic_events file lists all the currently
1796defined synthetic events, in this case the event defined above:
1797
1798 # cat /sys/kernel/debug/tracing/synthetic_events
1799 wakeup_latency u64 lat; pid_t pid; int prio
1800
1801An existing synthetic event definition can be removed by prepending
1802the command that defined it with a '!':
1803
1804 # echo '!wakeup_latency u64 lat pid_t pid int prio' >> \
1805 /sys/kernel/debug/tracing/synthetic_events
1806
1807At this point, there isn't yet an actual 'wakeup_latency' event
1808instantiated in the event subsytem - for this to happen, a 'hist
1809trigger action' needs to be instantiated and bound to actual fields
064f35a9
JFG		 1810and variables defined on other events (see Section 2.2.3 below on
1811how that is done using hist trigger 'onmatch' action). Once that is
1812done, the 'wakeup_latency' synthetic event instance is created.
033cbcee 1813
064f35a9 1814A histogram can now be defined for the new synthetic event:
033cbcee
TZ		 1815
1816 # echo 'hist:keys=pid,prio,lat.log2:sort=pid,lat' >> \
1817 /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
1818
1819The new event is created under the tracing/events/synthetic/ directory
1820and looks and behaves just like any other event:
1821
1822 # ls /sys/kernel/debug/tracing/events/synthetic/wakeup_latency
1823 enable filter format hist id trigger
1824
1825Like any other event, once a histogram is enabled for the event, the
1826output can be displayed by reading the event's 'hist' file.
1827
18282.2.3 Hist trigger 'actions'
1829----------------------------
1830
1831A hist trigger 'action' is a function that's executed whenever a
1832histogram entry is added or updated.
1833
1834The default 'action' if no special function is explicity specified is
1835as it always has been, to simply update the set of values associated
1836with an entry. Some applications, however, may want to perform
1837additional actions at that point, such as generate another event, or
1838compare and save a maximum.
1839
1840The following additional actions are available. To specify an action
1841for a given event, simply specify the action between colons in the
1842hist trigger specification.
1843
1844 - onmatch(matching.event).<synthetic_event_name>(param list)
1845
1846 The 'onmatch(matching.event).<synthetic_event_name>(params)' hist
1847 trigger action is invoked whenever an event matches and the
1848 histogram entry would be added or updated. It causes the named
1849 synthetic event to be generated with the values given in the
1850 'param list'. The result is the generation of a synthetic event
1851 that consists of the values contained in those variables at the
1852 time the invoking event was hit.
1853
1854 The 'param list' consists of one or more parameters which may be
1855 either variables or fields defined on either the 'matching.event'
1856 or the target event. The variables or fields specified in the
1857 param list may be either fully-qualified or unqualified. If a
1858 variable is specified as unqualified, it must be unique between
1859 the two events. A field name used as a param can be unqualified
1860 if it refers to the target event, but must be fully qualified if
1861 it refers to the matching event. A fully-qualified name is of the
1862 form 'system.event_name.$var_name' or 'system.event_name.field'.
1863
1864 The 'matching.event' specification is simply the fully qualified
1865 event name of the event that matches the target event for the
1866 onmatch() functionality, in the form 'system.event_name'.
1867
1868 Finally, the number and type of variables/fields in the 'param
1869 list' must match the number and types of the fields in the
1870 synthetic event being generated.
1871
1872 As an example the below defines a simple synthetic event and uses
1873 a variable defined on the sched_wakeup_new event as a parameter
1874 when invoking the synthetic event. Here we define the synthetic
1875 event:
1876
1877 # echo 'wakeup_new_test pid_t pid' >> \
1878 /sys/kernel/debug/tracing/synthetic_events
1879
1880 # cat /sys/kernel/debug/tracing/synthetic_events
1881 wakeup_new_test pid_t pid
1882
1883 The following hist trigger both defines the missing testpid
1884 variable and specifies an onmatch() action that generates a
1885 wakeup_new_test synthetic event whenever a sched_wakeup_new event
1886 occurs, which because of the 'if comm == "cyclictest"' filter only
1887 happens when the executable is cyclictest:
1888
1889 # echo 'hist:keys=$testpid:testpid=pid:onmatch(sched.sched_wakeup_new).\
1890 wakeup_new_test($testpid) if comm=="cyclictest"' >> \
1891 /sys/kernel/debug/tracing/events/sched/sched_wakeup_new/trigger
1892
1893 Creating and displaying a histogram based on those events is now
1894 just a matter of using the fields and new synthetic event in the
1895 tracing/events/synthetic directory, as usual:
1896
1897 # echo 'hist:keys=pid:sort=pid' >> \
1898 /sys/kernel/debug/tracing/events/synthetic/wakeup_new_test/trigger
1899
1900 Running 'cyclictest' should cause wakeup_new events to generate
1901 wakeup_new_test synthetic events which should result in histogram
1902 output in the wakeup_new_test event's hist file:
1903
1904 # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_new_test/hist
1905
1906 A more typical usage would be to use two events to calculate a
1907 latency. The following example uses a set of hist triggers to
1908 produce a 'wakeup_latency' histogram:
1909
1910 First, we define a 'wakeup_latency' synthetic event:
1911
1912 # echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> \
1913 /sys/kernel/debug/tracing/synthetic_events
1914
1915 Next, we specify that whenever we see a sched_waking event for a
1916 cyclictest thread, save the timestamp in a 'ts0' variable:
1917
1918 # echo 'hist:keys=$saved_pid:saved_pid=pid:ts0=common_timestamp.usecs \
1919 if comm=="cyclictest"' >> \
1920 /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
1921
1922 Then, when the corresponding thread is actually scheduled onto the
1923 CPU by a sched_switch event, calculate the latency and use that
1924 along with another variable and an event field to generate a
1925 wakeup_latency synthetic event:
1926
1927 # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\
1928 onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,\
1929 $saved_pid,next_prio) if next_comm=="cyclictest"' >> \
1930 /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
1931
1932 We also need to create a histogram on the wakeup_latency synthetic
1933 event in order to aggregate the generated synthetic event data:
1934
1935 # echo 'hist:keys=pid,prio,lat:sort=pid,lat' >> \
1936 /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
1937
1938 Finally, once we've run cyclictest to actually generate some
1939 events, we can see the output by looking at the wakeup_latency
1940 synthetic event's hist file:
1941
1942 # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/hist
1943
1944 - onmax(var).save(field,.. .)
1945
1946 The 'onmax(var).save(field,...)' hist trigger action is invoked
1947 whenever the value of 'var' associated with a histogram entry
1948 exceeds the current maximum contained in that variable.
1949
1950 The end result is that the trace event fields specified as the
1951 onmax.save() params will be saved if 'var' exceeds the current
1952 maximum for that hist trigger entry. This allows context from the
1953 event that exhibited the new maximum to be saved for later
1954 reference. When the histogram is displayed, additional fields
1955 displaying the saved values will be printed.
1956
1957 As an example the below defines a couple of hist triggers, one for
1958 sched_waking and another for sched_switch, keyed on pid. Whenever
1959 a sched_waking occurs, the timestamp is saved in the entry
1960 corresponding to the current pid, and when the scheduler switches
1961 back to that pid, the timestamp difference is calculated. If the
1962 resulting latency, stored in wakeup_lat, exceeds the current
1963 maximum latency, the values specified in the save() fields are
064f35a9 1964 recorded:
033cbcee
TZ		 1965
1966 # echo 'hist:keys=pid:ts0=common_timestamp.usecs \
1967 if comm=="cyclictest"' >> \
1968 /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
1969
1970 # echo 'hist:keys=next_pid:\
1971 wakeup_lat=common_timestamp.usecs-$ts0:\
1972 onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) \
1973 if next_comm=="cyclictest"' >> \
1974 /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
1975
1976 When the histogram is displayed, the max value and the saved
1977 values corresponding to the max are displayed following the rest
1978 of the fields:
1979
1980 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
1981 { next_pid: 2255 } hitcount: 239
1982 common_timestamp-ts0: 0
1983 max: 27
1984 next_comm: cyclictest
1985 prev_pid: 0 prev_prio: 120 prev_comm: swapper/1
1986
1987 { next_pid: 2256 } hitcount: 2355
1988 common_timestamp-ts0: 0
1989 max: 49 next_comm: cyclictest
1990 prev_pid: 0 prev_prio: 120 prev_comm: swapper/0
1991
1992 Totals:
1993 Hits: 12970
1994 Entries: 2
1995 Dropped: 0
d3439f9d
SRV		 1996
19973. User space creating a trigger
1998--------------------------------
1999
2000Writing into /sys/kernel/tracing/trace_marker writes into the ftrace
2001ring buffer. This can also act like an event, by writing into the trigger
2002file located in /sys/kernel/tracing/events/ftrace/print/
2003
2004Modifying cyclictest to write into the trace_marker file before it sleeps
2005and after it wakes up, something like this:
2006
2007static void traceputs(char *str)
2008{
2009 /* tracemark_fd is the trace_marker file descriptor */
2010 if (tracemark_fd < 0)
2011 return;
2012 /* write the tracemark message */
2013 write(tracemark_fd, str, strlen(str));
2014}
2015
2016And later add something like:
2017
2018 traceputs("start");
2019 clock_nanosleep(...);
2020 traceputs("end");
2021
2022We can make a histogram from this:
2023
2024 # cd /sys/kernel/tracing
2025 # echo 'latency u64 lat' > synthetic_events
2026 # echo 'hist:keys=common_pid:ts0=common_timestamp.usecs if buf == "start"' > events/ftrace/print/trigger
2027 # echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$ts0:onmatch(ftrace.print).latency($lat) if buf == "end"' >> events/ftrace/print/trigger
2028 # echo 'hist:keys=lat,common_pid:sort=lat' > events/synthetic/latency/trigger
2029
2030The above created a synthetic event called "latency" and two histograms
2031against the trace_marker, one gets triggered when "start" is written into the
2032trace_marker file and the other when "end" is written. If the pids match, then
2033it will call the "latency" synthetic event with the calculated latency as its
2034parameter. Finally, a histogram is added to the latency synthetic event to
2035record the calculated latency along with the pid.
2036
2037Now running cyclictest with:
2038
2039 # ./cyclictest -p80 -d0 -i250 -n -a -t --tracemark -b 1000
2040
2041 -p80 : run threads at priority 80
2042 -d0 : have all threads run at the same interval
2043 -i250 : start the interval at 250 microseconds (all threads will do this)
2044 -n : sleep with nanosleep
2045 -a : affine all threads to a separate CPU
2046 -t : one thread per available CPU
2047 --tracemark : enable trace mark writing
2048 -b 1000 : stop if any latency is greater than 1000 microseconds
2049
2050Note, the -b 1000 is used just to make --tracemark available.
2051
2052Then we can see the histogram created by this with:
2053
2054 # cat events/synthetic/latency/hist
2055# event histogram
2056#
2057# trigger info: hist:keys=lat,common_pid:vals=hitcount:sort=lat:size=2048 [active]
2058#
2059
2060{ lat: 107, common_pid: 2039 } hitcount: 1
2061{ lat: 122, common_pid: 2041 } hitcount: 1
2062{ lat: 166, common_pid: 2039 } hitcount: 1
2063{ lat: 174, common_pid: 2039 } hitcount: 1
2064{ lat: 194, common_pid: 2041 } hitcount: 1
2065{ lat: 196, common_pid: 2036 } hitcount: 1
2066{ lat: 197, common_pid: 2038 } hitcount: 1
2067{ lat: 198, common_pid: 2039 } hitcount: 1
2068{ lat: 199, common_pid: 2039 } hitcount: 1
2069{ lat: 200, common_pid: 2041 } hitcount: 1
2070{ lat: 201, common_pid: 2039 } hitcount: 2
2071{ lat: 202, common_pid: 2038 } hitcount: 1
2072{ lat: 202, common_pid: 2043 } hitcount: 1
2073{ lat: 203, common_pid: 2039 } hitcount: 1
2074{ lat: 203, common_pid: 2036 } hitcount: 1
2075{ lat: 203, common_pid: 2041 } hitcount: 1
2076{ lat: 206, common_pid: 2038 } hitcount: 2
2077{ lat: 207, common_pid: 2039 } hitcount: 1
2078{ lat: 207, common_pid: 2036 } hitcount: 1
2079{ lat: 208, common_pid: 2040 } hitcount: 1
2080{ lat: 209, common_pid: 2043 } hitcount: 1
2081{ lat: 210, common_pid: 2039 } hitcount: 1
2082{ lat: 211, common_pid: 2039 } hitcount: 4
2083{ lat: 212, common_pid: 2043 } hitcount: 1
2084{ lat: 212, common_pid: 2039 } hitcount: 2
2085{ lat: 213, common_pid: 2039 } hitcount: 1
2086{ lat: 214, common_pid: 2038 } hitcount: 1
2087{ lat: 214, common_pid: 2039 } hitcount: 2
2088{ lat: 214, common_pid: 2042 } hitcount: 1
2089{ lat: 215, common_pid: 2039 } hitcount: 1
2090{ lat: 217, common_pid: 2036 } hitcount: 1
2091{ lat: 217, common_pid: 2040 } hitcount: 1
2092{ lat: 217, common_pid: 2039 } hitcount: 1
2093{ lat: 218, common_pid: 2039 } hitcount: 6
2094{ lat: 219, common_pid: 2039 } hitcount: 9
2095{ lat: 220, common_pid: 2039 } hitcount: 11
2096{ lat: 221, common_pid: 2039 } hitcount: 5
2097{ lat: 221, common_pid: 2042 } hitcount: 1
2098{ lat: 222, common_pid: 2039 } hitcount: 7
2099{ lat: 223, common_pid: 2036 } hitcount: 1
2100{ lat: 223, common_pid: 2039 } hitcount: 3
2101{ lat: 224, common_pid: 2039 } hitcount: 4
2102{ lat: 224, common_pid: 2037 } hitcount: 1
2103{ lat: 224, common_pid: 2036 } hitcount: 2
2104{ lat: 225, common_pid: 2039 } hitcount: 5
2105{ lat: 225, common_pid: 2042 } hitcount: 1
2106{ lat: 226, common_pid: 2039 } hitcount: 7
2107{ lat: 226, common_pid: 2036 } hitcount: 4
2108{ lat: 227, common_pid: 2039 } hitcount: 6
2109{ lat: 227, common_pid: 2036 } hitcount: 12
2110{ lat: 227, common_pid: 2043 } hitcount: 1
2111{ lat: 228, common_pid: 2039 } hitcount: 7
2112{ lat: 228, common_pid: 2036 } hitcount: 14
2113{ lat: 229, common_pid: 2039 } hitcount: 9
2114{ lat: 229, common_pid: 2036 } hitcount: 8
2115{ lat: 229, common_pid: 2038 } hitcount: 1
2116{ lat: 230, common_pid: 2039 } hitcount: 11
2117{ lat: 230, common_pid: 2036 } hitcount: 6
2118{ lat: 230, common_pid: 2043 } hitcount: 1
2119{ lat: 230, common_pid: 2042 } hitcount: 2
2120{ lat: 231, common_pid: 2041 } hitcount: 1
2121{ lat: 231, common_pid: 2036 } hitcount: 6
2122{ lat: 231, common_pid: 2043 } hitcount: 1
2123{ lat: 231, common_pid: 2039 } hitcount: 8
2124{ lat: 232, common_pid: 2037 } hitcount: 1
2125{ lat: 232, common_pid: 2039 } hitcount: 6
2126{ lat: 232, common_pid: 2040 } hitcount: 2
2127{ lat: 232, common_pid: 2036 } hitcount: 5
2128{ lat: 232, common_pid: 2043 } hitcount: 1
2129{ lat: 233, common_pid: 2036 } hitcount: 5
2130{ lat: 233, common_pid: 2039 } hitcount: 11
2131{ lat: 234, common_pid: 2039 } hitcount: 4
2132{ lat: 234, common_pid: 2038 } hitcount: 2
2133{ lat: 234, common_pid: 2043 } hitcount: 2
2134{ lat: 234, common_pid: 2036 } hitcount: 11
2135{ lat: 234, common_pid: 2040 } hitcount: 1
2136{ lat: 235, common_pid: 2037 } hitcount: 2
2137{ lat: 235, common_pid: 2036 } hitcount: 8
2138{ lat: 235, common_pid: 2043 } hitcount: 2
2139{ lat: 235, common_pid: 2039 } hitcount: 5
2140{ lat: 235, common_pid: 2042 } hitcount: 2
2141{ lat: 235, common_pid: 2040 } hitcount: 4
2142{ lat: 235, common_pid: 2041 } hitcount: 1
2143{ lat: 236, common_pid: 2036 } hitcount: 7
2144{ lat: 236, common_pid: 2037 } hitcount: 1
2145{ lat: 236, common_pid: 2041 } hitcount: 5
2146{ lat: 236, common_pid: 2039 } hitcount: 3
2147{ lat: 236, common_pid: 2043 } hitcount: 9
2148{ lat: 236, common_pid: 2040 } hitcount: 7
2149{ lat: 237, common_pid: 2037 } hitcount: 1
2150{ lat: 237, common_pid: 2040 } hitcount: 1
2151{ lat: 237, common_pid: 2036 } hitcount: 9
2152{ lat: 237, common_pid: 2039 } hitcount: 3
2153{ lat: 237, common_pid: 2043 } hitcount: 8
2154{ lat: 237, common_pid: 2042 } hitcount: 2
2155{ lat: 237, common_pid: 2041 } hitcount: 2
2156{ lat: 238, common_pid: 2043 } hitcount: 10
2157{ lat: 238, common_pid: 2040 } hitcount: 1
2158{ lat: 238, common_pid: 2037 } hitcount: 9
2159{ lat: 238, common_pid: 2038 } hitcount: 1
2160{ lat: 238, common_pid: 2039 } hitcount: 1
2161{ lat: 238, common_pid: 2042 } hitcount: 3
2162{ lat: 238, common_pid: 2036 } hitcount: 7
2163{ lat: 239, common_pid: 2041 } hitcount: 1
2164{ lat: 239, common_pid: 2043 } hitcount: 11
2165{ lat: 239, common_pid: 2037 } hitcount: 11
2166{ lat: 239, common_pid: 2038 } hitcount: 6
2167{ lat: 239, common_pid: 2036 } hitcount: 7
2168{ lat: 239, common_pid: 2040 } hitcount: 1
2169{ lat: 239, common_pid: 2042 } hitcount: 9
2170{ lat: 240, common_pid: 2037 } hitcount: 29
2171{ lat: 240, common_pid: 2043 } hitcount: 15
2172{ lat: 240, common_pid: 2040 } hitcount: 44
2173{ lat: 240, common_pid: 2039 } hitcount: 1
2174{ lat: 240, common_pid: 2041 } hitcount: 2
2175{ lat: 240, common_pid: 2038 } hitcount: 1
2176{ lat: 240, common_pid: 2036 } hitcount: 10
2177{ lat: 240, common_pid: 2042 } hitcount: 13
2178{ lat: 241, common_pid: 2036 } hitcount: 21
2179{ lat: 241, common_pid: 2041 } hitcount: 36
2180{ lat: 241, common_pid: 2037 } hitcount: 34
2181{ lat: 241, common_pid: 2042 } hitcount: 14
2182{ lat: 241, common_pid: 2040 } hitcount: 94
2183{ lat: 241, common_pid: 2039 } hitcount: 12
2184{ lat: 241, common_pid: 2038 } hitcount: 2
2185{ lat: 241, common_pid: 2043 } hitcount: 28
2186{ lat: 242, common_pid: 2040 } hitcount: 109
2187{ lat: 242, common_pid: 2041 } hitcount: 506
2188{ lat: 242, common_pid: 2039 } hitcount: 155
2189{ lat: 242, common_pid: 2042 } hitcount: 21
2190{ lat: 242, common_pid: 2037 } hitcount: 52
2191{ lat: 242, common_pid: 2043 } hitcount: 21
2192{ lat: 242, common_pid: 2036 } hitcount: 16
2193{ lat: 242, common_pid: 2038 } hitcount: 156
2194{ lat: 243, common_pid: 2037 } hitcount: 46
2195{ lat: 243, common_pid: 2039 } hitcount: 40
2196{ lat: 243, common_pid: 2042 } hitcount: 119
2197{ lat: 243, common_pid: 2041 } hitcount: 611
2198{ lat: 243, common_pid: 2036 } hitcount: 69
2199{ lat: 243, common_pid: 2038 } hitcount: 784
2200{ lat: 243, common_pid: 2040 } hitcount: 323
2201{ lat: 243, common_pid: 2043 } hitcount: 14
2202{ lat: 244, common_pid: 2043 } hitcount: 35
2203{ lat: 244, common_pid: 2042 } hitcount: 305
2204{ lat: 244, common_pid: 2039 } hitcount: 8
2205{ lat: 244, common_pid: 2040 } hitcount: 4515
2206{ lat: 244, common_pid: 2038 } hitcount: 371
2207{ lat: 244, common_pid: 2037 } hitcount: 31
2208{ lat: 244, common_pid: 2036 } hitcount: 114
2209{ lat: 244, common_pid: 2041 } hitcount: 3396
2210{ lat: 245, common_pid: 2036 } hitcount: 700
2211{ lat: 245, common_pid: 2041 } hitcount: 2772
2212{ lat: 245, common_pid: 2037 } hitcount: 268
2213{ lat: 245, common_pid: 2039 } hitcount: 472
2214{ lat: 245, common_pid: 2038 } hitcount: 2758
2215{ lat: 245, common_pid: 2042 } hitcount: 3833
2216{ lat: 245, common_pid: 2040 } hitcount: 3105
2217{ lat: 245, common_pid: 2043 } hitcount: 645
2218{ lat: 246, common_pid: 2038 } hitcount: 3451
2219{ lat: 246, common_pid: 2041 } hitcount: 142
2220{ lat: 246, common_pid: 2037 } hitcount: 5101
2221{ lat: 246, common_pid: 2040 } hitcount: 68
2222{ lat: 246, common_pid: 2043 } hitcount: 5099
2223{ lat: 246, common_pid: 2039 } hitcount: 5608
2224{ lat: 246, common_pid: 2042 } hitcount: 3723
2225{ lat: 246, common_pid: 2036 } hitcount: 4738
2226{ lat: 247, common_pid: 2042 } hitcount: 312
2227{ lat: 247, common_pid: 2043 } hitcount: 2385
2228{ lat: 247, common_pid: 2041 } hitcount: 452
2229{ lat: 247, common_pid: 2038 } hitcount: 792
2230{ lat: 247, common_pid: 2040 } hitcount: 78
2231{ lat: 247, common_pid: 2036 } hitcount: 2375
2232{ lat: 247, common_pid: 2039 } hitcount: 1834
2233{ lat: 247, common_pid: 2037 } hitcount: 2655
2234{ lat: 248, common_pid: 2037 } hitcount: 36
2235{ lat: 248, common_pid: 2042 } hitcount: 11
2236{ lat: 248, common_pid: 2038 } hitcount: 122
2237{ lat: 248, common_pid: 2036 } hitcount: 135
2238{ lat: 248, common_pid: 2039 } hitcount: 26
2239{ lat: 248, common_pid: 2041 } hitcount: 503
2240{ lat: 248, common_pid: 2043 } hitcount: 66
2241{ lat: 248, common_pid: 2040 } hitcount: 46
2242{ lat: 249, common_pid: 2037 } hitcount: 29
2243{ lat: 249, common_pid: 2038 } hitcount: 1
2244{ lat: 249, common_pid: 2043 } hitcount: 29
2245{ lat: 249, common_pid: 2039 } hitcount: 8
2246{ lat: 249, common_pid: 2042 } hitcount: 56
2247{ lat: 249, common_pid: 2040 } hitcount: 27
2248{ lat: 249, common_pid: 2041 } hitcount: 11
2249{ lat: 249, common_pid: 2036 } hitcount: 27
2250{ lat: 250, common_pid: 2038 } hitcount: 1
2251{ lat: 250, common_pid: 2036 } hitcount: 30
2252{ lat: 250, common_pid: 2040 } hitcount: 19
2253{ lat: 250, common_pid: 2043 } hitcount: 22
2254{ lat: 250, common_pid: 2042 } hitcount: 20
2255{ lat: 250, common_pid: 2041 } hitcount: 1
2256{ lat: 250, common_pid: 2039 } hitcount: 6
2257{ lat: 250, common_pid: 2037 } hitcount: 48
2258{ lat: 251, common_pid: 2037 } hitcount: 43
2259{ lat: 251, common_pid: 2039 } hitcount: 1
2260{ lat: 251, common_pid: 2036 } hitcount: 12
2261{ lat: 251, common_pid: 2042 } hitcount: 2
2262{ lat: 251, common_pid: 2041 } hitcount: 1
2263{ lat: 251, common_pid: 2043 } hitcount: 15
2264{ lat: 251, common_pid: 2040 } hitcount: 3
2265{ lat: 252, common_pid: 2040 } hitcount: 1
2266{ lat: 252, common_pid: 2036 } hitcount: 12
2267{ lat: 252, common_pid: 2037 } hitcount: 21
2268{ lat: 252, common_pid: 2043 } hitcount: 14
2269{ lat: 253, common_pid: 2037 } hitcount: 21
2270{ lat: 253, common_pid: 2039 } hitcount: 2
2271{ lat: 253, common_pid: 2036 } hitcount: 9
2272{ lat: 253, common_pid: 2043 } hitcount: 6
2273{ lat: 253, common_pid: 2040 } hitcount: 1
2274{ lat: 254, common_pid: 2036 } hitcount: 8
2275{ lat: 254, common_pid: 2043 } hitcount: 3
2276{ lat: 254, common_pid: 2041 } hitcount: 1
2277{ lat: 254, common_pid: 2042 } hitcount: 1
2278{ lat: 254, common_pid: 2039 } hitcount: 1
2279{ lat: 254, common_pid: 2037 } hitcount: 12
2280{ lat: 255, common_pid: 2043 } hitcount: 1
2281{ lat: 255, common_pid: 2037 } hitcount: 2
2282{ lat: 255, common_pid: 2036 } hitcount: 2
2283{ lat: 255, common_pid: 2039 } hitcount: 8
2284{ lat: 256, common_pid: 2043 } hitcount: 1
2285{ lat: 256, common_pid: 2036 } hitcount: 4
2286{ lat: 256, common_pid: 2039 } hitcount: 6
2287{ lat: 257, common_pid: 2039 } hitcount: 5
2288{ lat: 257, common_pid: 2036 } hitcount: 4
2289{ lat: 258, common_pid: 2039 } hitcount: 5
2290{ lat: 258, common_pid: 2036 } hitcount: 2
2291{ lat: 259, common_pid: 2036 } hitcount: 7
2292{ lat: 259, common_pid: 2039 } hitcount: 7
2293{ lat: 260, common_pid: 2036 } hitcount: 8
2294{ lat: 260, common_pid: 2039 } hitcount: 6
2295{ lat: 261, common_pid: 2036 } hitcount: 5
2296{ lat: 261, common_pid: 2039 } hitcount: 7
2297{ lat: 262, common_pid: 2039 } hitcount: 5
2298{ lat: 262, common_pid: 2036 } hitcount: 5
2299{ lat: 263, common_pid: 2039 } hitcount: 7
2300{ lat: 263, common_pid: 2036 } hitcount: 7
2301{ lat: 264, common_pid: 2039 } hitcount: 9
2302{ lat: 264, common_pid: 2036 } hitcount: 9
2303{ lat: 265, common_pid: 2036 } hitcount: 5
2304{ lat: 265, common_pid: 2039 } hitcount: 1
2305{ lat: 266, common_pid: 2036 } hitcount: 1
2306{ lat: 266, common_pid: 2039 } hitcount: 3
2307{ lat: 267, common_pid: 2036 } hitcount: 1
2308{ lat: 267, common_pid: 2039 } hitcount: 3
2309{ lat: 268, common_pid: 2036 } hitcount: 1
2310{ lat: 268, common_pid: 2039 } hitcount: 6
2311{ lat: 269, common_pid: 2036 } hitcount: 1
2312{ lat: 269, common_pid: 2043 } hitcount: 1
2313{ lat: 269, common_pid: 2039 } hitcount: 2
2314{ lat: 270, common_pid: 2040 } hitcount: 1
2315{ lat: 270, common_pid: 2039 } hitcount: 6
2316{ lat: 271, common_pid: 2041 } hitcount: 1
2317{ lat: 271, common_pid: 2039 } hitcount: 5
2318{ lat: 272, common_pid: 2039 } hitcount: 10
2319{ lat: 273, common_pid: 2039 } hitcount: 8
2320{ lat: 274, common_pid: 2039 } hitcount: 2
2321{ lat: 275, common_pid: 2039 } hitcount: 1
2322{ lat: 276, common_pid: 2039 } hitcount: 2
2323{ lat: 276, common_pid: 2037 } hitcount: 1
2324{ lat: 276, common_pid: 2038 } hitcount: 1
2325{ lat: 277, common_pid: 2039 } hitcount: 1
2326{ lat: 277, common_pid: 2042 } hitcount: 1
2327{ lat: 278, common_pid: 2039 } hitcount: 1
2328{ lat: 279, common_pid: 2039 } hitcount: 4
2329{ lat: 279, common_pid: 2043 } hitcount: 1
2330{ lat: 280, common_pid: 2039 } hitcount: 3
2331{ lat: 283, common_pid: 2036 } hitcount: 2
2332{ lat: 284, common_pid: 2039 } hitcount: 1
2333{ lat: 284, common_pid: 2043 } hitcount: 1
2334{ lat: 288, common_pid: 2039 } hitcount: 1
2335{ lat: 289, common_pid: 2039 } hitcount: 1
2336{ lat: 300, common_pid: 2039 } hitcount: 1
2337{ lat: 384, common_pid: 2039 } hitcount: 1
2338
2339Totals:
2340 Hits: 67625
2341 Entries: 278
2342 Dropped: 0
2343
2344Note, the writes are around the sleep, so ideally they will all be of 250
2345microseconds. If you are wondering how there are several that are under
2346250 microseconds, that is because the way cyclictest works, is if one
2347iteration comes in late, the next one will set the timer to wake up less that
2348250. That is, if an iteration came in 50 microseconds late, the next wake up
2349will be at 200 microseconds.
2350
2351But this could easily be done in userspace. To make this even more
2352interesting, we can mix the histogram between events that happened in the
2353kernel with trace_marker.
2354
2355 # cd /sys/kernel/tracing
2356 # echo 'latency u64 lat' > synthetic_events
2357 # echo 'hist:keys=pid:ts0=common_timestamp.usecs' > events/sched/sched_waking/trigger
2358 # echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).latency($lat) if buf == "end"' > events/ftrace/print/trigger
2359 # echo 'hist:keys=lat,common_pid:sort=lat' > events/synthetic/latency/trigger
2360
2361The difference this time is that instead of using the trace_marker to start
2362the latency, the sched_waking event is used, matching the common_pid for the
2363trace_marker write with the pid that is being woken by sched_waking.
2364
2365After running cyclictest again with the same parameters, we now have:
2366
2367 # cat events/synthetic/latency/hist
2368# event histogram
2369#
2370# trigger info: hist:keys=lat,common_pid:vals=hitcount:sort=lat:size=2048 [active]
2371#
2372
2373{ lat: 7, common_pid: 2302 } hitcount: 640
2374{ lat: 7, common_pid: 2299 } hitcount: 42
2375{ lat: 7, common_pid: 2303 } hitcount: 18
2376{ lat: 7, common_pid: 2305 } hitcount: 166
2377{ lat: 7, common_pid: 2306 } hitcount: 1
2378{ lat: 7, common_pid: 2301 } hitcount: 91
2379{ lat: 7, common_pid: 2300 } hitcount: 17
2380{ lat: 8, common_pid: 2303 } hitcount: 8296
2381{ lat: 8, common_pid: 2304 } hitcount: 6864
2382{ lat: 8, common_pid: 2305 } hitcount: 9464
2383{ lat: 8, common_pid: 2301 } hitcount: 9213
2384{ lat: 8, common_pid: 2306 } hitcount: 6246
2385{ lat: 8, common_pid: 2302 } hitcount: 8797
2386{ lat: 8, common_pid: 2299 } hitcount: 8771
2387{ lat: 8, common_pid: 2300 } hitcount: 8119
2388{ lat: 9, common_pid: 2305 } hitcount: 1519
2389{ lat: 9, common_pid: 2299 } hitcount: 2346
2390{ lat: 9, common_pid: 2303 } hitcount: 2841
2391{ lat: 9, common_pid: 2301 } hitcount: 1846
2392{ lat: 9, common_pid: 2304 } hitcount: 3861
2393{ lat: 9, common_pid: 2302 } hitcount: 1210
2394{ lat: 9, common_pid: 2300 } hitcount: 2762
2395{ lat: 9, common_pid: 2306 } hitcount: 4247
2396{ lat: 10, common_pid: 2299 } hitcount: 16
2397{ lat: 10, common_pid: 2306 } hitcount: 333
2398{ lat: 10, common_pid: 2303 } hitcount: 16
2399{ lat: 10, common_pid: 2304 } hitcount: 168
2400{ lat: 10, common_pid: 2302 } hitcount: 240
2401{ lat: 10, common_pid: 2301 } hitcount: 28
2402{ lat: 10, common_pid: 2300 } hitcount: 95
2403{ lat: 10, common_pid: 2305 } hitcount: 18
2404{ lat: 11, common_pid: 2303 } hitcount: 5
2405{ lat: 11, common_pid: 2305 } hitcount: 8
2406{ lat: 11, common_pid: 2306 } hitcount: 221
2407{ lat: 11, common_pid: 2302 } hitcount: 76
2408{ lat: 11, common_pid: 2304 } hitcount: 26
2409{ lat: 11, common_pid: 2300 } hitcount: 125
2410{ lat: 11, common_pid: 2299 } hitcount: 2
2411{ lat: 12, common_pid: 2305 } hitcount: 3
2412{ lat: 12, common_pid: 2300 } hitcount: 6
2413{ lat: 12, common_pid: 2306 } hitcount: 90
2414{ lat: 12, common_pid: 2302 } hitcount: 4
2415{ lat: 12, common_pid: 2303 } hitcount: 1
2416{ lat: 12, common_pid: 2304 } hitcount: 122
2417{ lat: 13, common_pid: 2300 } hitcount: 12
2418{ lat: 13, common_pid: 2301 } hitcount: 1
2419{ lat: 13, common_pid: 2306 } hitcount: 32
2420{ lat: 13, common_pid: 2302 } hitcount: 5
2421{ lat: 13, common_pid: 2305 } hitcount: 1
2422{ lat: 13, common_pid: 2303 } hitcount: 1
2423{ lat: 13, common_pid: 2304 } hitcount: 61
2424{ lat: 14, common_pid: 2303 } hitcount: 4
2425{ lat: 14, common_pid: 2306 } hitcount: 5
2426{ lat: 14, common_pid: 2305 } hitcount: 4
2427{ lat: 14, common_pid: 2304 } hitcount: 62
2428{ lat: 14, common_pid: 2302 } hitcount: 19
2429{ lat: 14, common_pid: 2300 } hitcount: 33
2430{ lat: 14, common_pid: 2299 } hitcount: 1
2431{ lat: 14, common_pid: 2301 } hitcount: 4
2432{ lat: 15, common_pid: 2305 } hitcount: 1
2433{ lat: 15, common_pid: 2302 } hitcount: 25
2434{ lat: 15, common_pid: 2300 } hitcount: 11
2435{ lat: 15, common_pid: 2299 } hitcount: 5
2436{ lat: 15, common_pid: 2301 } hitcount: 1
2437{ lat: 15, common_pid: 2304 } hitcount: 8
2438{ lat: 15, common_pid: 2303 } hitcount: 1
2439{ lat: 15, common_pid: 2306 } hitcount: 6
2440{ lat: 16, common_pid: 2302 } hitcount: 31
2441{ lat: 16, common_pid: 2306 } hitcount: 3
2442{ lat: 16, common_pid: 2300 } hitcount: 5
2443{ lat: 17, common_pid: 2302 } hitcount: 6
2444{ lat: 17, common_pid: 2303 } hitcount: 1
2445{ lat: 18, common_pid: 2304 } hitcount: 1
2446{ lat: 18, common_pid: 2302 } hitcount: 8
2447{ lat: 18, common_pid: 2299 } hitcount: 1
2448{ lat: 18, common_pid: 2301 } hitcount: 1
2449{ lat: 19, common_pid: 2303 } hitcount: 4
2450{ lat: 19, common_pid: 2304 } hitcount: 5
2451{ lat: 19, common_pid: 2302 } hitcount: 4
2452{ lat: 19, common_pid: 2299 } hitcount: 3
2453{ lat: 19, common_pid: 2306 } hitcount: 1
2454{ lat: 19, common_pid: 2300 } hitcount: 4
2455{ lat: 19, common_pid: 2305 } hitcount: 5
2456{ lat: 20, common_pid: 2299 } hitcount: 2
2457{ lat: 20, common_pid: 2302 } hitcount: 3
2458{ lat: 20, common_pid: 2305 } hitcount: 1
2459{ lat: 20, common_pid: 2300 } hitcount: 2
2460{ lat: 20, common_pid: 2301 } hitcount: 2
2461{ lat: 20, common_pid: 2303 } hitcount: 3
2462{ lat: 21, common_pid: 2305 } hitcount: 1
2463{ lat: 21, common_pid: 2299 } hitcount: 5
2464{ lat: 21, common_pid: 2303 } hitcount: 4
2465{ lat: 21, common_pid: 2302 } hitcount: 7
2466{ lat: 21, common_pid: 2300 } hitcount: 1
2467{ lat: 21, common_pid: 2301 } hitcount: 5
2468{ lat: 21, common_pid: 2304 } hitcount: 2
2469{ lat: 22, common_pid: 2302 } hitcount: 5
2470{ lat: 22, common_pid: 2303 } hitcount: 1
2471{ lat: 22, common_pid: 2306 } hitcount: 3
2472{ lat: 22, common_pid: 2301 } hitcount: 2
2473{ lat: 22, common_pid: 2300 } hitcount: 1
2474{ lat: 22, common_pid: 2299 } hitcount: 1
2475{ lat: 22, common_pid: 2305 } hitcount: 1
2476{ lat: 22, common_pid: 2304 } hitcount: 1
2477{ lat: 23, common_pid: 2299 } hitcount: 1
2478{ lat: 23, common_pid: 2306 } hitcount: 2
2479{ lat: 23, common_pid: 2302 } hitcount: 6
2480{ lat: 24, common_pid: 2302 } hitcount: 3
2481{ lat: 24, common_pid: 2300 } hitcount: 1
2482{ lat: 24, common_pid: 2306 } hitcount: 2
2483{ lat: 24, common_pid: 2305 } hitcount: 1
2484{ lat: 24, common_pid: 2299 } hitcount: 1
2485{ lat: 25, common_pid: 2300 } hitcount: 1
2486{ lat: 25, common_pid: 2302 } hitcount: 4
2487{ lat: 26, common_pid: 2302 } hitcount: 2
2488{ lat: 27, common_pid: 2305 } hitcount: 1
2489{ lat: 27, common_pid: 2300 } hitcount: 1
2490{ lat: 27, common_pid: 2302 } hitcount: 3
2491{ lat: 28, common_pid: 2306 } hitcount: 1
2492{ lat: 28, common_pid: 2302 } hitcount: 4
2493{ lat: 29, common_pid: 2302 } hitcount: 1
2494{ lat: 29, common_pid: 2300 } hitcount: 2
2495{ lat: 29, common_pid: 2306 } hitcount: 1
2496{ lat: 29, common_pid: 2304 } hitcount: 1
2497{ lat: 30, common_pid: 2302 } hitcount: 4
2498{ lat: 31, common_pid: 2302 } hitcount: 6
2499{ lat: 32, common_pid: 2302 } hitcount: 1
2500{ lat: 33, common_pid: 2299 } hitcount: 1
2501{ lat: 33, common_pid: 2302 } hitcount: 3
2502{ lat: 34, common_pid: 2302 } hitcount: 2
2503{ lat: 35, common_pid: 2302 } hitcount: 1
2504{ lat: 35, common_pid: 2304 } hitcount: 1
2505{ lat: 36, common_pid: 2302 } hitcount: 4
2506{ lat: 37, common_pid: 2302 } hitcount: 6
2507{ lat: 38, common_pid: 2302 } hitcount: 2
2508{ lat: 39, common_pid: 2302 } hitcount: 2
2509{ lat: 39, common_pid: 2304 } hitcount: 1
2510{ lat: 40, common_pid: 2304 } hitcount: 2
2511{ lat: 40, common_pid: 2302 } hitcount: 5
2512{ lat: 41, common_pid: 2304 } hitcount: 1
2513{ lat: 41, common_pid: 2302 } hitcount: 8
2514{ lat: 42, common_pid: 2302 } hitcount: 6
2515{ lat: 42, common_pid: 2304 } hitcount: 1
2516{ lat: 43, common_pid: 2302 } hitcount: 3
2517{ lat: 43, common_pid: 2304 } hitcount: 4
2518{ lat: 44, common_pid: 2302 } hitcount: 6
2519{ lat: 45, common_pid: 2302 } hitcount: 5
2520{ lat: 46, common_pid: 2302 } hitcount: 5
2521{ lat: 47, common_pid: 2302 } hitcount: 7
2522{ lat: 48, common_pid: 2301 } hitcount: 1
2523{ lat: 48, common_pid: 2302 } hitcount: 9
2524{ lat: 49, common_pid: 2302 } hitcount: 3
2525{ lat: 50, common_pid: 2302 } hitcount: 1
2526{ lat: 50, common_pid: 2301 } hitcount: 1
2527{ lat: 51, common_pid: 2302 } hitcount: 2
2528{ lat: 51, common_pid: 2301 } hitcount: 1
2529{ lat: 61, common_pid: 2302 } hitcount: 1
2530{ lat: 110, common_pid: 2302 } hitcount: 1
2531
2532Totals:
2533 Hits: 89565
2534 Entries: 158
2535 Dropped: 0
2536
2537This doesn't tell us any information about how late cyclictest may have
2538woken up, but it does show us a nice histogram of how long it took from
2539the time that cyclictest was woken to the time it made it into user space.
Linux 6.x block layer and io_uring tree(s)