Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | To configure the Crystal CS423x sound chip and activate its DSP functions, |
2 | modules may be loaded in this order: | |
3 | ||
4 | modprobe sound | |
5 | insmod ad1848 | |
6 | insmod uart401 | |
7 | insmod cs4232 io=* irq=* dma=* dma2=* | |
8 | ||
9 | This is the meaning of the parameters: | |
10 | ||
11 | io--I/O address of the Windows Sound System (normally 0x534) | |
12 | irq--IRQ of this device | |
13 | dma and dma2--DMA channels (DMA2 may be 0) | |
14 | ||
15 | On some cards, the board attempts to do non-PnP setup, and fails. If you | |
16 | have problems, use Linux' PnP facilities. | |
17 | ||
18 | To get MIDI facilities add | |
19 | ||
20 | insmod opl3 io=* | |
21 | ||
22 | where "io" is the I/O address of the OPL3 synthesizer. This will be shown | |
23 | in /proc/sys/pnp and is normally 0x388. |