Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | The 3Com Etherlink Plus (3c505) driver. |
2 | ||
3 | This driver now uses DMA. There is currently no support for PIO operation. | |
4 | The default DMA channel is 6; this is _not_ autoprobed, so you must | |
5 | make sure you configure it correctly. If loading the driver as a | |
6 | module, you can do this with "modprobe 3c505 dma=n". If the driver is | |
7 | linked statically into the kernel, you must either use an "ether=" | |
8 | statement on the command line, or change the definition of ELP_DMA in 3c505.h. | |
9 | ||
10 | The driver will warn you if it has to fall back on the compiled in | |
11 | default DMA channel. | |
12 | ||
13 | If no base address is given at boot time, the driver will autoprobe | |
14 | ports 0x300, 0x280 and 0x310 (in that order). If no IRQ is given, the driver | |
15 | will try to probe for it. | |
16 | ||
17 | The driver can be used as a loadable module. See net-modules.txt for details | |
18 | of the parameters it can take. | |
19 | ||
20 | Theoretically, one instance of the driver can now run multiple cards, | |
21 | in the standard way (when loading a module, say "modprobe 3c505 | |
22 | io=0x300,0x340 irq=10,11 dma=6,7" or whatever). I have not tested | |
23 | this, though. | |
24 | ||
25 | The driver may now support revision 2 hardware; the dependency on | |
26 | being able to read the host control register has been removed. This | |
27 | is also untested, since I don't have a suitable card. | |
28 | ||
29 | Known problems: | |
30 | I still see "DMA upload timed out" messages from time to time. These | |
31 | seem to be fairly non-fatal though. | |
32 | The card is old and slow. | |
33 | ||
34 | To do: | |
35 | Improve probe/setup code | |
36 | Test multicast and promiscuous operation | |
37 | ||
38 | Authors: | |
39 | The driver is mainly written by Craig Southeren, email | |
40 | <craigs@ineluki.apana.org.au>. | |
41 | Parts of the driver (adapting the driver to 1.1.4+ kernels, | |
42 | IRQ/address detection, some changes) and this README by | |
43 | Juha Laiho <jlaiho@ichaos.nullnet.fi>. | |
44 | DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk> | |
45 | Multicard support, Software configurable DMA, etc., by | |
46 | Christopher Collins <ccollins@pcug.org.au> |