Commit | Line | Data |
---|---|---|
6f4a0dae GR |
1 | Kernel driver tps53679 |
2 | ====================== | |
3 | ||
4 | Supported chips: | |
5 | ||
6 | * Texas Instruments TPS53647 | |
7 | ||
8 | Prefix: 'tps53647' | |
9 | ||
10 | Addresses scanned: - | |
11 | ||
ad736c1a | 12 | Datasheet: https://www.ti.com/lit/gpn/tps53647 |
6f4a0dae GR |
13 | |
14 | * Texas Instruments TPS53667 | |
15 | ||
16 | Prefix: 'tps53667' | |
17 | ||
18 | Addresses scanned: - | |
19 | ||
ad736c1a | 20 | Datasheet: https://www.ti.com/lit/gpn/TPS53667 |
6f4a0dae | 21 | |
cb3d37b5 ER |
22 | * Texas Instruments TPS53676 |
23 | ||
24 | Prefix: 'tps53676' | |
25 | ||
26 | Addresses scanned: - | |
27 | ||
28 | Datasheet: https://www.ti.com/lit/gpn/TPS53676 | |
29 | ||
6f4a0dae GR |
30 | * Texas Instruments TPS53679 |
31 | ||
32 | Prefix: 'tps53679' | |
33 | ||
34 | Addresses scanned: - | |
35 | ||
ad736c1a | 36 | Datasheet: https://www.ti.com/lit/gpn/TPS53679 (short version) |
6f4a0dae GR |
37 | |
38 | * Texas Instruments TPS53681 | |
39 | ||
40 | Prefix: 'tps53681' | |
41 | ||
42 | Addresses scanned: - | |
43 | ||
ad736c1a | 44 | Datasheet: https://www.ti.com/lit/gpn/TPS53681 |
6f4a0dae GR |
45 | |
46 | * Texas Instruments TPS53688 | |
47 | ||
48 | Prefix: 'tps53688' | |
49 | ||
50 | Addresses scanned: - | |
51 | ||
52 | Datasheet: Available under NDA | |
53 | ||
54 | ||
55 | Authors: | |
56 | Vadim Pasternak <vadimp@mellanox.com> | |
57 | Guenter Roeck <linux@roeck-us.net> | |
58 | ||
59 | ||
60 | Description | |
61 | ----------- | |
62 | ||
63 | Chips in this series are multi-phase step-down converters with one or two | |
64 | output channels and up to 8 phases per channel. | |
65 | ||
66 | ||
67 | Usage Notes | |
68 | ----------- | |
69 | ||
70 | This driver does not probe for PMBus devices. You will have to instantiate | |
71 | devices explicitly. | |
72 | ||
73 | Example: the following commands will load the driver for an TPS53681 at address | |
74 | 0x60 on I2C bus #1:: | |
75 | ||
76 | # modprobe tps53679 | |
77 | # echo tps53681 0x60 > /sys/bus/i2c/devices/i2c-1/new_device | |
78 | ||
79 | ||
80 | Sysfs attributes | |
81 | ---------------- | |
82 | ||
83 | ======================= ======================================================== | |
84 | in1_label "vin" | |
85 | ||
86 | in1_input Measured input voltage. | |
87 | ||
88 | in1_lcrit Critical minimum input voltage | |
89 | ||
90 | TPS53679, TPS53681, TPS53688 only. | |
91 | ||
92 | in1_lcrit_alarm Input voltage critical low alarm. | |
93 | ||
94 | TPS53679, TPS53681, TPS53688 only. | |
95 | ||
96 | in1_crit Critical maximum input voltage. | |
97 | ||
98 | in1_crit_alarm Input voltage critical high alarm. | |
99 | ||
100 | in[N]_label "vout[1-2]" | |
101 | ||
102 | - TPS53647, TPS53667: N=2 | |
103 | - TPS53679, TPS53588: N=2,3 | |
104 | ||
105 | in[N]_input Measured output voltage. | |
106 | ||
107 | in[N]_lcrit Critical minimum input voltage. | |
108 | ||
109 | TPS53679, TPS53681, TPS53688 only. | |
110 | ||
111 | in[N]_lcrit_alarm Critical minimum voltage alarm. | |
112 | ||
113 | TPS53679, TPS53681, TPS53688 only. | |
114 | ||
115 | in[N]_alarm Output voltage alarm. | |
116 | ||
117 | TPS53647, TPS53667 only. | |
118 | ||
119 | in[N]_crit Critical maximum output voltage. | |
120 | ||
121 | TPS53679, TPS53681, TPS53688 only. | |
122 | ||
123 | in[N]_crit_alarm Output voltage critical high alarm. | |
124 | ||
125 | TPS53679, TPS53681, TPS53688 only. | |
126 | ||
127 | temp[N]_input Measured temperature. | |
128 | ||
129 | - TPS53647, TPS53667: N=1 | |
130 | - TPS53679, TPS53681, TPS53588: N=1,2 | |
131 | ||
132 | temp[N]_max Maximum temperature. | |
133 | ||
134 | temp[N]_crit Critical high temperature. | |
135 | ||
136 | temp[N]_max_alarm Temperature high alarm. | |
137 | ||
138 | temp[N]_crit_alarm Temperature critical high alarm. | |
139 | ||
140 | power1_label "pin". | |
141 | ||
142 | power1_input Measured input power. | |
143 | ||
144 | power[N]_label "pout[1-2]". | |
145 | ||
146 | - TPS53647, TPS53667: N=2 | |
cb3d37b5 | 147 | - TPS53676, TPS53679, TPS53681, TPS53588: N=2,3 |
6f4a0dae GR |
148 | |
149 | power[N]_input Measured output power. | |
150 | ||
151 | curr1_label "iin". | |
152 | ||
153 | curr1_input Measured input current. | |
154 | ||
155 | curr1_max Maximum input current. | |
156 | ||
157 | curr1_max_alarm Input current high alarm. | |
158 | ||
159 | curr1_crit Critical input current. | |
160 | ||
161 | curr1_crit_alarm Input current critical alarm. | |
162 | ||
163 | curr[N]_label "iout[1-2]" or "iout1.[0-5]". | |
164 | ||
165 | The first digit is the output channel, the second | |
166 | digit is the phase within the channel. Per-phase | |
cb3d37b5 | 167 | telemetry supported on TPS53676 and TPS53681 only. |
6f4a0dae GR |
168 | |
169 | - TPS53647, TPS53667: N=2 | |
170 | - TPS53679, TPS53588: N=2,3 | |
cb3d37b5 | 171 | - TPS53676: N=2-8 |
6f4a0dae GR |
172 | - TPS53681: N=2-9 |
173 | ||
174 | curr[N]_input Measured output current. | |
175 | ||
176 | curr[N]_max Maximum output current. | |
177 | ||
178 | curr[N]_crit Critical high output current. | |
179 | ||
180 | curr[N]_max_alarm Output current high alarm. | |
181 | ||
182 | curr[N]_crit_alarm Output current critical high alarm. | |
183 | ||
184 | Limit and alarm attributes are only available for | |
185 | non-phase telemetry (iout1, iout2). | |
186 | ||
187 | ======================= ======================================================== |