projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 24c1aa85 NG |
1 | Kernel Driver IBMPOWERNV |
| 2 | ======================== | |
| 3 | ||
| 4 | Supported systems: | |
| 5 | * Any recent IBM P servers based on POWERNV platform | |
| 6 | ||
| 7 | Author: Neelesh Gupta | |
| 8 | ||
| 9 | Description | |
| 10 | ----------- | |
| 11 | ||
| 12 | This driver implements reading the platform sensors data like temperature/fan/ | |
| 13 | voltage/power for 'POWERNV' platform. | |
| 14 | ||
| 15 | The driver uses the platform device infrastructure. It probes the device tree | |
| 16 | for sensor devices during the __init phase and registers them with the 'hwmon'. | |
| 17 | 'hwmon' populates the 'sysfs' tree having attribute files, each for a given | |
| 18 | sensor type and its attribute data. | |
| 19 | ||
| 20 | All the nodes in the DT appear under "/ibm,opal/sensors" and each valid node in | |
| 21 | the DT maps to an attribute file in 'sysfs'. The node exports unique 'sensor-id' | |
| 22 | which the driver uses to make an OPAL call to the firmware. | |
| 23 | ||
| 24 | Usage notes | |
| 25 | ----------- | |
| 26 | The driver is built statically with the kernel by enabling the config | |
| 27 | CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'. | |
| 28 | ||
| 29 | Sysfs attributes | |
| 30 | ---------------- | |
| 31 | ||
| 32 | fanX_input Measured RPM value. | |
| 33 | fanX_min Threshold RPM for alert generation. | |
| 34 | fanX_fault 0: No fail condition | |
| 35 | 1: Failing fan | |
| e0da9912 | 36 | |
| 24c1aa85 NG |
37 | tempX_input Measured ambient temperature. |
| 38 | tempX_max Threshold ambient temperature for alert generation. | |
| e0da9912 SB |
39 | tempX_highest Historical maximum temperature |
| 40 | tempX_lowest Historical minimum temperature | |
| 41 | tempX_enable Enable/disable all temperature sensors belonging to the | |
| 42 | sub-group. In POWER9, this attribute corresponds to | |
| 43 | each OCC. Using this attribute each OCC can be asked to | |
| 44 | disable/enable all of its temperature sensors. | |
| 45 | 1: Enable | |
| 46 | 0: Disable | |
| 47 | ||
| 48 | inX_input Measured power supply voltage (millivolt) | |
| 24c1aa85 NG |
49 | inX_fault 0: No fail condition. |
| 50 | 1: Failing power supply. | |
| e0da9912 SB |
51 | inX_highest Historical maximum voltage |
| 52 | inX_lowest Historical minimum voltage | |
| 53 | inX_enable Enable/disable all voltage sensors belonging to the | |
| 54 | sub-group. In POWER9, this attribute corresponds to | |
| 55 | each OCC. Using this attribute each OCC can be asked to | |
| 56 | disable/enable all of its voltage sensors. | |
| 57 | 1: Enable | |
| 58 | 0: Disable | |
| 59 | ||
| 60 | powerX_input Power consumption (microWatt) | |
| 61 | powerX_input_highest Historical maximum power | |
| 62 | powerX_input_lowest Historical minimum power | |
| 63 | powerX_enable Enable/disable all power sensors belonging to the | |
| 64 | sub-group. In POWER9, this attribute corresponds to | |
| 65 | each OCC. Using this attribute each OCC can be asked to | |
| 66 | disable/enable all of its power sensors. | |
| 67 | 1: Enable | |
| 68 | 0: Disable | |
| 69 | ||
| 70 | currX_input Measured current (milliampere) | |
| 71 | currX_highest Historical maximum current | |
| 72 | currX_lowest Historical minimum current | |
| 73 | currX_enable Enable/disable all current sensors belonging to the | |
| 74 | sub-group. In POWER9, this attribute corresponds to | |
| 75 | each OCC. Using this attribute each OCC can be asked to | |
| 76 | disable/enable all of its current sensors. | |
| 77 | 1: Enable | |
| 78 | 0: Disable | |
| 79 | ||
| 80 | energyX_input Cumulative energy (microJoule) |