Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | ------------------------------------------------------------------------------ |
2 | T H E /proc F I L E S Y S T E M | |
3 | ------------------------------------------------------------------------------ | |
4 | /proc/sys Terrehon Bowden <terrehon@pacbell.net> October 7 1999 | |
5 | Bodo Bauer <bb@ricochet.net> | |
6 | ||
7 | 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000 | |
349888ee | 8 | move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009 |
1da177e4 LT |
9 | ------------------------------------------------------------------------------ |
10 | Version 1.3 Kernel version 2.2.12 | |
11 | Kernel version 2.4.0-test11-pre4 | |
12 | ------------------------------------------------------------------------------ | |
349888ee | 13 | fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009 |
1da177e4 LT |
14 | |
15 | Table of Contents | |
16 | ----------------- | |
17 | ||
18 | 0 Preface | |
19 | 0.1 Introduction/Credits | |
20 | 0.2 Legal Stuff | |
21 | ||
22 | 1 Collecting System Information | |
23 | 1.1 Process-Specific Subdirectories | |
24 | 1.2 Kernel data | |
25 | 1.3 IDE devices in /proc/ide | |
26 | 1.4 Networking info in /proc/net | |
27 | 1.5 SCSI info | |
28 | 1.6 Parallel port info in /proc/parport | |
29 | 1.7 TTY info in /proc/tty | |
30 | 1.8 Miscellaneous kernel statistics in /proc/stat | |
760df93e | 31 | 1.9 Ext4 file system parameters |
1da177e4 LT |
32 | |
33 | 2 Modifying System Parameters | |
760df93e SF |
34 | |
35 | 3 Per-Process Parameters | |
36 | 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score | |
37 | 3.2 /proc/<pid>/oom_score - Display current oom-killer score | |
38 | 3.3 /proc/<pid>/io - Display the IO accounting fields | |
39 | 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings | |
40 | 3.5 /proc/<pid>/mountinfo - Information about mounts | |
4614a696 | 41 | 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm |
760df93e | 42 | |
1da177e4 LT |
43 | |
44 | ------------------------------------------------------------------------------ | |
45 | Preface | |
46 | ------------------------------------------------------------------------------ | |
47 | ||
48 | 0.1 Introduction/Credits | |
49 | ------------------------ | |
50 | ||
51 | This documentation is part of a soon (or so we hope) to be released book on | |
52 | the SuSE Linux distribution. As there is no complete documentation for the | |
53 | /proc file system and we've used many freely available sources to write these | |
54 | chapters, it seems only fair to give the work back to the Linux community. | |
55 | This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm | |
56 | afraid it's still far from complete, but we hope it will be useful. As far as | |
57 | we know, it is the first 'all-in-one' document about the /proc file system. It | |
58 | is focused on the Intel x86 hardware, so if you are looking for PPC, ARM, | |
59 | SPARC, AXP, etc., features, you probably won't find what you are looking for. | |
60 | It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But | |
61 | additions and patches are welcome and will be added to this document if you | |
62 | mail them to Bodo. | |
63 | ||
64 | We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of | |
65 | other people for help compiling this documentation. We'd also like to extend a | |
66 | special thank you to Andi Kleen for documentation, which we relied on heavily | |
67 | to create this document, as well as the additional information he provided. | |
68 | Thanks to everybody else who contributed source or docs to the Linux kernel | |
69 | and helped create a great piece of software... :) | |
70 | ||
71 | If you have any comments, corrections or additions, please don't hesitate to | |
72 | contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this | |
73 | document. | |
74 | ||
75 | The latest version of this document is available online at | |
76 | http://skaro.nightcrawler.com/~bb/Docs/Proc as HTML version. | |
77 | ||
78 | If the above direction does not works for you, ypu could try the kernel | |
79 | mailing list at linux-kernel@vger.kernel.org and/or try to reach me at | |
80 | comandante@zaralinux.com. | |
81 | ||
82 | 0.2 Legal Stuff | |
83 | --------------- | |
84 | ||
85 | We don't guarantee the correctness of this document, and if you come to us | |
86 | complaining about how you screwed up your system because of incorrect | |
87 | documentation, we won't feel responsible... | |
88 | ||
89 | ------------------------------------------------------------------------------ | |
90 | CHAPTER 1: COLLECTING SYSTEM INFORMATION | |
91 | ------------------------------------------------------------------------------ | |
92 | ||
93 | ------------------------------------------------------------------------------ | |
94 | In This Chapter | |
95 | ------------------------------------------------------------------------------ | |
96 | * Investigating the properties of the pseudo file system /proc and its | |
97 | ability to provide information on the running Linux system | |
98 | * Examining /proc's structure | |
99 | * Uncovering various information about the kernel and the processes running | |
100 | on the system | |
101 | ------------------------------------------------------------------------------ | |
102 | ||
103 | ||
104 | The proc file system acts as an interface to internal data structures in the | |
105 | kernel. It can be used to obtain information about the system and to change | |
106 | certain kernel parameters at runtime (sysctl). | |
107 | ||
108 | First, we'll take a look at the read-only parts of /proc. In Chapter 2, we | |
109 | show you how you can use /proc/sys to change settings. | |
110 | ||
111 | 1.1 Process-Specific Subdirectories | |
112 | ----------------------------------- | |
113 | ||
114 | The directory /proc contains (among other things) one subdirectory for each | |
115 | process running on the system, which is named after the process ID (PID). | |
116 | ||
117 | The link self points to the process reading the file system. Each process | |
118 | subdirectory has the entries listed in Table 1-1. | |
119 | ||
120 | ||
349888ee | 121 | Table 1-1: Process specific entries in /proc |
1da177e4 | 122 | .............................................................................. |
b813e931 DR |
123 | File Content |
124 | clear_refs Clears page referenced bits shown in smaps output | |
125 | cmdline Command line arguments | |
126 | cpu Current and last cpu in which it was executed (2.4)(smp) | |
127 | cwd Link to the current working directory | |
128 | environ Values of environment variables | |
129 | exe Link to the executable of this process | |
130 | fd Directory, which contains all file descriptors | |
131 | maps Memory maps to executables and library files (2.4) | |
132 | mem Memory held by this process | |
133 | root Link to the root directory of this process | |
134 | stat Process status | |
135 | statm Process memory status information | |
136 | status Process status in human readable form | |
137 | wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan | |
2ec220e2 | 138 | stack Report full stack trace, enable via CONFIG_STACKTRACE |
349888ee SS |
139 | smaps a extension based on maps, showing the memory consumption of |
140 | each mapping | |
1da177e4 LT |
141 | .............................................................................. |
142 | ||
143 | For example, to get the status information of a process, all you have to do is | |
144 | read the file /proc/PID/status: | |
145 | ||
349888ee SS |
146 | >cat /proc/self/status |
147 | Name: cat | |
148 | State: R (running) | |
149 | Tgid: 5452 | |
150 | Pid: 5452 | |
151 | PPid: 743 | |
1da177e4 | 152 | TracerPid: 0 (2.4) |
349888ee SS |
153 | Uid: 501 501 501 501 |
154 | Gid: 100 100 100 100 | |
155 | FDSize: 256 | |
156 | Groups: 100 14 16 | |
157 | VmPeak: 5004 kB | |
158 | VmSize: 5004 kB | |
159 | VmLck: 0 kB | |
160 | VmHWM: 476 kB | |
161 | VmRSS: 476 kB | |
162 | VmData: 156 kB | |
163 | VmStk: 88 kB | |
164 | VmExe: 68 kB | |
165 | VmLib: 1412 kB | |
166 | VmPTE: 20 kb | |
b084d435 | 167 | VmSwap: 0 kB |
349888ee SS |
168 | Threads: 1 |
169 | SigQ: 0/28578 | |
170 | SigPnd: 0000000000000000 | |
171 | ShdPnd: 0000000000000000 | |
172 | SigBlk: 0000000000000000 | |
173 | SigIgn: 0000000000000000 | |
174 | SigCgt: 0000000000000000 | |
175 | CapInh: 00000000fffffeff | |
176 | CapPrm: 0000000000000000 | |
177 | CapEff: 0000000000000000 | |
178 | CapBnd: ffffffffffffffff | |
179 | voluntary_ctxt_switches: 0 | |
180 | nonvoluntary_ctxt_switches: 1 | |
1da177e4 LT |
181 | |
182 | This shows you nearly the same information you would get if you viewed it with | |
183 | the ps command. In fact, ps uses the proc file system to obtain its | |
349888ee SS |
184 | information. But you get a more detailed view of the process by reading the |
185 | file /proc/PID/status. It fields are described in table 1-2. | |
186 | ||
187 | The statm file contains more detailed information about the process | |
188 | memory usage. Its seven fields are explained in Table 1-3. The stat file | |
189 | contains details information about the process itself. Its fields are | |
190 | explained in Table 1-4. | |
1da177e4 | 191 | |
34e55232 KH |
192 | (for SMP CONFIG users) |
193 | For making accounting scalable, RSS related information are handled in | |
194 | asynchronous manner and the vaule may not be very precise. To see a precise | |
195 | snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table. | |
196 | It's slow but very precise. | |
197 | ||
cb2992a6 | 198 | Table 1-2: Contents of the status files (as of 2.6.30-rc7) |
349888ee SS |
199 | .............................................................................. |
200 | Field Content | |
201 | Name filename of the executable | |
202 | State state (R is running, S is sleeping, D is sleeping | |
203 | in an uninterruptible wait, Z is zombie, | |
204 | T is traced or stopped) | |
205 | Tgid thread group ID | |
206 | Pid process id | |
207 | PPid process id of the parent process | |
208 | TracerPid PID of process tracing this process (0 if not) | |
209 | Uid Real, effective, saved set, and file system UIDs | |
210 | Gid Real, effective, saved set, and file system GIDs | |
211 | FDSize number of file descriptor slots currently allocated | |
212 | Groups supplementary group list | |
213 | VmPeak peak virtual memory size | |
214 | VmSize total program size | |
215 | VmLck locked memory size | |
216 | VmHWM peak resident set size ("high water mark") | |
217 | VmRSS size of memory portions | |
218 | VmData size of data, stack, and text segments | |
219 | VmStk size of data, stack, and text segments | |
220 | VmExe size of text segment | |
221 | VmLib size of shared library code | |
222 | VmPTE size of page table entries | |
b084d435 | 223 | VmSwap size of swap usage (the number of referred swapents) |
349888ee SS |
224 | Threads number of threads |
225 | SigQ number of signals queued/max. number for queue | |
226 | SigPnd bitmap of pending signals for the thread | |
227 | ShdPnd bitmap of shared pending signals for the process | |
228 | SigBlk bitmap of blocked signals | |
229 | SigIgn bitmap of ignored signals | |
230 | SigCgt bitmap of catched signals | |
231 | CapInh bitmap of inheritable capabilities | |
232 | CapPrm bitmap of permitted capabilities | |
233 | CapEff bitmap of effective capabilities | |
234 | CapBnd bitmap of capabilities bounding set | |
235 | Cpus_allowed mask of CPUs on which this process may run | |
236 | Cpus_allowed_list Same as previous, but in "list format" | |
237 | Mems_allowed mask of memory nodes allowed to this process | |
238 | Mems_allowed_list Same as previous, but in "list format" | |
239 | voluntary_ctxt_switches number of voluntary context switches | |
240 | nonvoluntary_ctxt_switches number of non voluntary context switches | |
241 | .............................................................................. | |
1da177e4 | 242 | |
349888ee | 243 | Table 1-3: Contents of the statm files (as of 2.6.8-rc3) |
1da177e4 LT |
244 | .............................................................................. |
245 | Field Content | |
246 | size total program size (pages) (same as VmSize in status) | |
247 | resident size of memory portions (pages) (same as VmRSS in status) | |
248 | shared number of pages that are shared (i.e. backed by a file) | |
249 | trs number of pages that are 'code' (not including libs; broken, | |
250 | includes data segment) | |
251 | lrs number of pages of library (always 0 on 2.6) | |
252 | drs number of pages of data/stack (including libs; broken, | |
253 | includes library text) | |
254 | dt number of dirty pages (always 0 on 2.6) | |
255 | .............................................................................. | |
256 | ||
18d96779 | 257 | |
349888ee | 258 | Table 1-4: Contents of the stat files (as of 2.6.30-rc7) |
18d96779 KC |
259 | .............................................................................. |
260 | Field Content | |
261 | pid process id | |
262 | tcomm filename of the executable | |
263 | state state (R is running, S is sleeping, D is sleeping in an | |
264 | uninterruptible wait, Z is zombie, T is traced or stopped) | |
265 | ppid process id of the parent process | |
266 | pgrp pgrp of the process | |
267 | sid session id | |
268 | tty_nr tty the process uses | |
269 | tty_pgrp pgrp of the tty | |
270 | flags task flags | |
271 | min_flt number of minor faults | |
272 | cmin_flt number of minor faults with child's | |
273 | maj_flt number of major faults | |
274 | cmaj_flt number of major faults with child's | |
275 | utime user mode jiffies | |
276 | stime kernel mode jiffies | |
277 | cutime user mode jiffies with child's | |
278 | cstime kernel mode jiffies with child's | |
279 | priority priority level | |
280 | nice nice level | |
281 | num_threads number of threads | |
2e01e00e | 282 | it_real_value (obsolete, always 0) |
18d96779 KC |
283 | start_time time the process started after system boot |
284 | vsize virtual memory size | |
285 | rss resident set memory size | |
286 | rsslim current limit in bytes on the rss | |
287 | start_code address above which program text can run | |
288 | end_code address below which program text can run | |
289 | start_stack address of the start of the stack | |
290 | esp current value of ESP | |
291 | eip current value of EIP | |
349888ee SS |
292 | pending bitmap of pending signals |
293 | blocked bitmap of blocked signals | |
294 | sigign bitmap of ignored signals | |
295 | sigcatch bitmap of catched signals | |
18d96779 KC |
296 | wchan address where process went to sleep |
297 | 0 (place holder) | |
298 | 0 (place holder) | |
299 | exit_signal signal to send to parent thread on exit | |
300 | task_cpu which CPU the task is scheduled on | |
301 | rt_priority realtime priority | |
302 | policy scheduling policy (man sched_setscheduler) | |
303 | blkio_ticks time spent waiting for block IO | |
349888ee SS |
304 | gtime guest time of the task in jiffies |
305 | cgtime guest time of the task children in jiffies | |
18d96779 KC |
306 | .............................................................................. |
307 | ||
349888ee SS |
308 | The /proc/PID/map file containing the currently mapped memory regions and |
309 | their access permissions. | |
310 | ||
311 | The format is: | |
312 | ||
313 | address perms offset dev inode pathname | |
314 | ||
315 | 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test | |
316 | 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test | |
317 | 0804a000-0806b000 rw-p 00000000 00:00 0 [heap] | |
318 | a7cb1000-a7cb2000 ---p 00000000 00:00 0 | |
34441427 | 319 | a7cb2000-a7eb2000 rw-p 00000000 00:00 0 |
349888ee SS |
320 | a7eb2000-a7eb3000 ---p 00000000 00:00 0 |
321 | a7eb3000-a7ed5000 rw-p 00000000 00:00 0 | |
322 | a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6 | |
323 | a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6 | |
324 | a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6 | |
325 | a800b000-a800e000 rw-p 00000000 00:00 0 | |
326 | a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0 | |
327 | a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0 | |
328 | a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0 | |
329 | a8024000-a8027000 rw-p 00000000 00:00 0 | |
330 | a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2 | |
331 | a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2 | |
332 | a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2 | |
333 | aff35000-aff4a000 rw-p 00000000 00:00 0 [stack] | |
334 | ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso] | |
335 | ||
336 | where "address" is the address space in the process that it occupies, "perms" | |
337 | is a set of permissions: | |
338 | ||
339 | r = read | |
340 | w = write | |
341 | x = execute | |
342 | s = shared | |
343 | p = private (copy on write) | |
344 | ||
345 | "offset" is the offset into the mapping, "dev" is the device (major:minor), and | |
346 | "inode" is the inode on that device. 0 indicates that no inode is associated | |
347 | with the memory region, as the case would be with BSS (uninitialized data). | |
348 | The "pathname" shows the name associated file for this mapping. If the mapping | |
349 | is not associated with a file: | |
350 | ||
351 | [heap] = the heap of the program | |
352 | [stack] = the stack of the main process | |
353 | [vdso] = the "virtual dynamic shared object", | |
354 | the kernel system call handler | |
355 | ||
356 | or if empty, the mapping is anonymous. | |
357 | ||
358 | ||
359 | The /proc/PID/smaps is an extension based on maps, showing the memory | |
360 | consumption for each of the process's mappings. For each of mappings there | |
361 | is a series of lines such as the following: | |
362 | ||
363 | 08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash | |
364 | Size: 1084 kB | |
365 | Rss: 892 kB | |
366 | Pss: 374 kB | |
367 | Shared_Clean: 892 kB | |
368 | Shared_Dirty: 0 kB | |
369 | Private_Clean: 0 kB | |
370 | Private_Dirty: 0 kB | |
371 | Referenced: 892 kB | |
372 | Swap: 0 kB | |
373 | KernelPageSize: 4 kB | |
374 | MMUPageSize: 4 kB | |
375 | ||
376 | The first of these lines shows the same information as is displayed for the | |
377 | mapping in /proc/PID/maps. The remaining lines show the size of the mapping, | |
378 | the amount of the mapping that is currently resident in RAM, the "proportional | |
379 | set size” (divide each shared page by the number of processes sharing it), the | |
380 | number of clean and dirty shared pages in the mapping, and the number of clean | |
381 | and dirty private pages in the mapping. The "Referenced" indicates the amount | |
382 | of memory currently marked as referenced or accessed. | |
383 | ||
384 | This file is only present if the CONFIG_MMU kernel configuration option is | |
385 | enabled. | |
18d96779 | 386 | |
398499d5 MB |
387 | The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG |
388 | bits on both physical and virtual pages associated with a process. | |
389 | To clear the bits for all the pages associated with the process | |
390 | > echo 1 > /proc/PID/clear_refs | |
391 | ||
392 | To clear the bits for the anonymous pages associated with the process | |
393 | > echo 2 > /proc/PID/clear_refs | |
394 | ||
395 | To clear the bits for the file mapped pages associated with the process | |
396 | > echo 3 > /proc/PID/clear_refs | |
397 | Any other value written to /proc/PID/clear_refs will have no effect. | |
398 | ||
399 | ||
1da177e4 LT |
400 | 1.2 Kernel data |
401 | --------------- | |
402 | ||
403 | Similar to the process entries, the kernel data files give information about | |
404 | the running kernel. The files used to obtain this information are contained in | |
349888ee | 405 | /proc and are listed in Table 1-5. Not all of these will be present in your |
1da177e4 LT |
406 | system. It depends on the kernel configuration and the loaded modules, which |
407 | files are there, and which are missing. | |
408 | ||
349888ee | 409 | Table 1-5: Kernel info in /proc |
1da177e4 LT |
410 | .............................................................................. |
411 | File Content | |
412 | apm Advanced power management info | |
413 | buddyinfo Kernel memory allocator information (see text) (2.5) | |
414 | bus Directory containing bus specific information | |
415 | cmdline Kernel command line | |
416 | cpuinfo Info about the CPU | |
417 | devices Available devices (block and character) | |
418 | dma Used DMS channels | |
419 | filesystems Supported filesystems | |
420 | driver Various drivers grouped here, currently rtc (2.4) | |
421 | execdomains Execdomains, related to security (2.4) | |
422 | fb Frame Buffer devices (2.4) | |
423 | fs File system parameters, currently nfs/exports (2.4) | |
424 | ide Directory containing info about the IDE subsystem | |
425 | interrupts Interrupt usage | |
426 | iomem Memory map (2.4) | |
427 | ioports I/O port usage | |
428 | irq Masks for irq to cpu affinity (2.4)(smp?) | |
429 | isapnp ISA PnP (Plug&Play) Info (2.4) | |
430 | kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4)) | |
431 | kmsg Kernel messages | |
432 | ksyms Kernel symbol table | |
433 | loadavg Load average of last 1, 5 & 15 minutes | |
434 | locks Kernel locks | |
435 | meminfo Memory info | |
436 | misc Miscellaneous | |
437 | modules List of loaded modules | |
438 | mounts Mounted filesystems | |
439 | net Networking info (see text) | |
a1b57ac0 | 440 | pagetypeinfo Additional page allocator information (see text) (2.5) |
1da177e4 | 441 | partitions Table of partitions known to the system |
8b60756a | 442 | pci Deprecated info of PCI bus (new way -> /proc/bus/pci/, |
1da177e4 LT |
443 | decoupled by lspci (2.4) |
444 | rtc Real time clock | |
445 | scsi SCSI info (see text) | |
446 | slabinfo Slab pool info | |
d3d64df2 | 447 | softirqs softirq usage |
1da177e4 LT |
448 | stat Overall statistics |
449 | swaps Swap space utilization | |
450 | sys See chapter 2 | |
451 | sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4) | |
452 | tty Info of tty drivers | |
453 | uptime System uptime | |
454 | version Kernel version | |
455 | video bttv info of video resources (2.4) | |
a47a126a | 456 | vmallocinfo Show vmalloced areas |
1da177e4 LT |
457 | .............................................................................. |
458 | ||
459 | You can, for example, check which interrupts are currently in use and what | |
460 | they are used for by looking in the file /proc/interrupts: | |
461 | ||
462 | > cat /proc/interrupts | |
463 | CPU0 | |
464 | 0: 8728810 XT-PIC timer | |
465 | 1: 895 XT-PIC keyboard | |
466 | 2: 0 XT-PIC cascade | |
467 | 3: 531695 XT-PIC aha152x | |
468 | 4: 2014133 XT-PIC serial | |
469 | 5: 44401 XT-PIC pcnet_cs | |
470 | 8: 2 XT-PIC rtc | |
471 | 11: 8 XT-PIC i82365 | |
472 | 12: 182918 XT-PIC PS/2 Mouse | |
473 | 13: 1 XT-PIC fpu | |
474 | 14: 1232265 XT-PIC ide0 | |
475 | 15: 7 XT-PIC ide1 | |
476 | NMI: 0 | |
477 | ||
478 | In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the | |
479 | output of a SMP machine): | |
480 | ||
481 | > cat /proc/interrupts | |
482 | ||
483 | CPU0 CPU1 | |
484 | 0: 1243498 1214548 IO-APIC-edge timer | |
485 | 1: 8949 8958 IO-APIC-edge keyboard | |
486 | 2: 0 0 XT-PIC cascade | |
487 | 5: 11286 10161 IO-APIC-edge soundblaster | |
488 | 8: 1 0 IO-APIC-edge rtc | |
489 | 9: 27422 27407 IO-APIC-edge 3c503 | |
490 | 12: 113645 113873 IO-APIC-edge PS/2 Mouse | |
491 | 13: 0 0 XT-PIC fpu | |
492 | 14: 22491 24012 IO-APIC-edge ide0 | |
493 | 15: 2183 2415 IO-APIC-edge ide1 | |
494 | 17: 30564 30414 IO-APIC-level eth0 | |
495 | 18: 177 164 IO-APIC-level bttv | |
496 | NMI: 2457961 2457959 | |
497 | LOC: 2457882 2457881 | |
498 | ERR: 2155 | |
499 | ||
500 | NMI is incremented in this case because every timer interrupt generates a NMI | |
501 | (Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups. | |
502 | ||
503 | LOC is the local interrupt counter of the internal APIC of every CPU. | |
504 | ||
505 | ERR is incremented in the case of errors in the IO-APIC bus (the bus that | |
506 | connects the CPUs in a SMP system. This means that an error has been detected, | |
507 | the IO-APIC automatically retry the transmission, so it should not be a big | |
508 | problem, but you should read the SMP-FAQ. | |
509 | ||
38e760a1 JK |
510 | In 2.6.2* /proc/interrupts was expanded again. This time the goal was for |
511 | /proc/interrupts to display every IRQ vector in use by the system, not | |
512 | just those considered 'most important'. The new vectors are: | |
513 | ||
514 | THR -- interrupt raised when a machine check threshold counter | |
515 | (typically counting ECC corrected errors of memory or cache) exceeds | |
516 | a configurable threshold. Only available on some systems. | |
517 | ||
518 | TRM -- a thermal event interrupt occurs when a temperature threshold | |
519 | has been exceeded for the CPU. This interrupt may also be generated | |
520 | when the temperature drops back to normal. | |
521 | ||
522 | SPU -- a spurious interrupt is some interrupt that was raised then lowered | |
523 | by some IO device before it could be fully processed by the APIC. Hence | |
524 | the APIC sees the interrupt but does not know what device it came from. | |
525 | For this case the APIC will generate the interrupt with a IRQ vector | |
526 | of 0xff. This might also be generated by chipset bugs. | |
527 | ||
528 | RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are | |
529 | sent from one CPU to another per the needs of the OS. Typically, | |
530 | their statistics are used by kernel developers and interested users to | |
19f59460 | 531 | determine the occurrence of interrupts of the given type. |
38e760a1 JK |
532 | |
533 | The above IRQ vectors are displayed only when relevent. For example, | |
534 | the threshold vector does not exist on x86_64 platforms. Others are | |
535 | suppressed when the system is a uniprocessor. As of this writing, only | |
536 | i386 and x86_64 platforms support the new IRQ vector displays. | |
537 | ||
538 | Of some interest is the introduction of the /proc/irq directory to 2.4. | |
1da177e4 LT |
539 | It could be used to set IRQ to CPU affinity, this means that you can "hook" an |
540 | IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the | |
18404756 MK |
541 | irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and |
542 | prof_cpu_mask. | |
1da177e4 LT |
543 | |
544 | For example | |
545 | > ls /proc/irq/ | |
546 | 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask | |
18404756 | 547 | 1 11 13 15 17 19 3 5 7 9 default_smp_affinity |
1da177e4 LT |
548 | > ls /proc/irq/0/ |
549 | smp_affinity | |
550 | ||
18404756 MK |
551 | smp_affinity is a bitmask, in which you can specify which CPUs can handle the |
552 | IRQ, you can set it by doing: | |
1da177e4 | 553 | |
18404756 MK |
554 | > echo 1 > /proc/irq/10/smp_affinity |
555 | ||
556 | This means that only the first CPU will handle the IRQ, but you can also echo | |
557 | 5 which means that only the first and fourth CPU can handle the IRQ. | |
1da177e4 | 558 | |
18404756 MK |
559 | The contents of each smp_affinity file is the same by default: |
560 | ||
561 | > cat /proc/irq/0/smp_affinity | |
562 | ffffffff | |
1da177e4 | 563 | |
18404756 MK |
564 | The default_smp_affinity mask applies to all non-active IRQs, which are the |
565 | IRQs which have not yet been allocated/activated, and hence which lack a | |
566 | /proc/irq/[0-9]* directory. | |
1da177e4 | 567 | |
18404756 MK |
568 | prof_cpu_mask specifies which CPUs are to be profiled by the system wide |
569 | profiler. Default value is ffffffff (all cpus). | |
1da177e4 LT |
570 | |
571 | The way IRQs are routed is handled by the IO-APIC, and it's Round Robin | |
572 | between all the CPUs which are allowed to handle it. As usual the kernel has | |
573 | more info than you and does a better job than you, so the defaults are the | |
574 | best choice for almost everyone. | |
575 | ||
576 | There are three more important subdirectories in /proc: net, scsi, and sys. | |
577 | The general rule is that the contents, or even the existence of these | |
578 | directories, depend on your kernel configuration. If SCSI is not enabled, the | |
579 | directory scsi may not exist. The same is true with the net, which is there | |
580 | only when networking support is present in the running kernel. | |
581 | ||
582 | The slabinfo file gives information about memory usage at the slab level. | |
583 | Linux uses slab pools for memory management above page level in version 2.2. | |
584 | Commonly used objects have their own slab pool (such as network buffers, | |
585 | directory cache, and so on). | |
586 | ||
587 | .............................................................................. | |
588 | ||
589 | > cat /proc/buddyinfo | |
590 | ||
591 | Node 0, zone DMA 0 4 5 4 4 3 ... | |
592 | Node 0, zone Normal 1 0 0 1 101 8 ... | |
593 | Node 0, zone HighMem 2 0 0 1 1 0 ... | |
594 | ||
a1b57ac0 | 595 | External fragmentation is a problem under some workloads, and buddyinfo is a |
1da177e4 LT |
596 | useful tool for helping diagnose these problems. Buddyinfo will give you a |
597 | clue as to how big an area you can safely allocate, or why a previous | |
598 | allocation failed. | |
599 | ||
600 | Each column represents the number of pages of a certain order which are | |
601 | available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in | |
602 | ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE | |
603 | available in ZONE_NORMAL, etc... | |
604 | ||
a1b57ac0 MG |
605 | More information relevant to external fragmentation can be found in |
606 | pagetypeinfo. | |
607 | ||
608 | > cat /proc/pagetypeinfo | |
609 | Page block order: 9 | |
610 | Pages per block: 512 | |
611 | ||
612 | Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 | |
613 | Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0 | |
614 | Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 | |
615 | Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2 | |
616 | Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0 | |
617 | Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 | |
618 | Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9 | |
619 | Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0 | |
620 | Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452 | |
621 | Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0 | |
622 | Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 | |
623 | ||
624 | Number of blocks type Unmovable Reclaimable Movable Reserve Isolate | |
625 | Node 0, zone DMA 2 0 5 1 0 | |
626 | Node 0, zone DMA32 41 6 967 2 0 | |
627 | ||
628 | Fragmentation avoidance in the kernel works by grouping pages of different | |
629 | migrate types into the same contiguous regions of memory called page blocks. | |
630 | A page block is typically the size of the default hugepage size e.g. 2MB on | |
631 | X86-64. By keeping pages grouped based on their ability to move, the kernel | |
632 | can reclaim pages within a page block to satisfy a high-order allocation. | |
633 | ||
634 | The pagetypinfo begins with information on the size of a page block. It | |
635 | then gives the same type of information as buddyinfo except broken down | |
636 | by migrate-type and finishes with details on how many page blocks of each | |
637 | type exist. | |
638 | ||
639 | If min_free_kbytes has been tuned correctly (recommendations made by hugeadm | |
640 | from libhugetlbfs http://sourceforge.net/projects/libhugetlbfs/), one can | |
641 | make an estimate of the likely number of huge pages that can be allocated | |
642 | at a given point in time. All the "Movable" blocks should be allocatable | |
643 | unless memory has been mlock()'d. Some of the Reclaimable blocks should | |
644 | also be allocatable although a lot of filesystem metadata may have to be | |
645 | reclaimed to achieve this. | |
646 | ||
1da177e4 LT |
647 | .............................................................................. |
648 | ||
649 | meminfo: | |
650 | ||
651 | Provides information about distribution and utilization of memory. This | |
652 | varies by architecture and compile options. The following is from a | |
653 | 16GB PIII, which has highmem enabled. You may not have all of these fields. | |
654 | ||
655 | > cat /proc/meminfo | |
656 | ||
657 | ||
658 | MemTotal: 16344972 kB | |
659 | MemFree: 13634064 kB | |
660 | Buffers: 3656 kB | |
661 | Cached: 1195708 kB | |
662 | SwapCached: 0 kB | |
663 | Active: 891636 kB | |
664 | Inactive: 1077224 kB | |
665 | HighTotal: 15597528 kB | |
666 | HighFree: 13629632 kB | |
667 | LowTotal: 747444 kB | |
668 | LowFree: 4432 kB | |
669 | SwapTotal: 0 kB | |
670 | SwapFree: 0 kB | |
671 | Dirty: 968 kB | |
672 | Writeback: 0 kB | |
b88473f7 | 673 | AnonPages: 861800 kB |
1da177e4 | 674 | Mapped: 280372 kB |
b88473f7 MS |
675 | Slab: 284364 kB |
676 | SReclaimable: 159856 kB | |
677 | SUnreclaim: 124508 kB | |
678 | PageTables: 24448 kB | |
679 | NFS_Unstable: 0 kB | |
680 | Bounce: 0 kB | |
681 | WritebackTmp: 0 kB | |
1da177e4 LT |
682 | CommitLimit: 7669796 kB |
683 | Committed_AS: 100056 kB | |
1da177e4 LT |
684 | VmallocTotal: 112216 kB |
685 | VmallocUsed: 428 kB | |
686 | VmallocChunk: 111088 kB | |
687 | ||
688 | MemTotal: Total usable ram (i.e. physical ram minus a few reserved | |
689 | bits and the kernel binary code) | |
690 | MemFree: The sum of LowFree+HighFree | |
691 | Buffers: Relatively temporary storage for raw disk blocks | |
692 | shouldn't get tremendously large (20MB or so) | |
693 | Cached: in-memory cache for files read from the disk (the | |
694 | pagecache). Doesn't include SwapCached | |
695 | SwapCached: Memory that once was swapped out, is swapped back in but | |
696 | still also is in the swapfile (if memory is needed it | |
697 | doesn't need to be swapped out AGAIN because it is already | |
698 | in the swapfile. This saves I/O) | |
699 | Active: Memory that has been used more recently and usually not | |
700 | reclaimed unless absolutely necessary. | |
701 | Inactive: Memory which has been less recently used. It is more | |
702 | eligible to be reclaimed for other purposes | |
703 | HighTotal: | |
704 | HighFree: Highmem is all memory above ~860MB of physical memory | |
705 | Highmem areas are for use by userspace programs, or | |
706 | for the pagecache. The kernel must use tricks to access | |
707 | this memory, making it slower to access than lowmem. | |
708 | LowTotal: | |
709 | LowFree: Lowmem is memory which can be used for everything that | |
3f6dee9b | 710 | highmem can be used for, but it is also available for the |
1da177e4 LT |
711 | kernel's use for its own data structures. Among many |
712 | other things, it is where everything from the Slab is | |
713 | allocated. Bad things happen when you're out of lowmem. | |
714 | SwapTotal: total amount of swap space available | |
715 | SwapFree: Memory which has been evicted from RAM, and is temporarily | |
716 | on the disk | |
717 | Dirty: Memory which is waiting to get written back to the disk | |
718 | Writeback: Memory which is actively being written back to the disk | |
b88473f7 | 719 | AnonPages: Non-file backed pages mapped into userspace page tables |
1da177e4 | 720 | Mapped: files which have been mmaped, such as libraries |
e82443c0 | 721 | Slab: in-kernel data structures cache |
b88473f7 MS |
722 | SReclaimable: Part of Slab, that might be reclaimed, such as caches |
723 | SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure | |
724 | PageTables: amount of memory dedicated to the lowest level of page | |
725 | tables. | |
726 | NFS_Unstable: NFS pages sent to the server, but not yet committed to stable | |
727 | storage | |
728 | Bounce: Memory used for block device "bounce buffers" | |
729 | WritebackTmp: Memory used by FUSE for temporary writeback buffers | |
1da177e4 LT |
730 | CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'), |
731 | this is the total amount of memory currently available to | |
732 | be allocated on the system. This limit is only adhered to | |
733 | if strict overcommit accounting is enabled (mode 2 in | |
734 | 'vm.overcommit_memory'). | |
735 | The CommitLimit is calculated with the following formula: | |
736 | CommitLimit = ('vm.overcommit_ratio' * Physical RAM) + Swap | |
737 | For example, on a system with 1G of physical RAM and 7G | |
738 | of swap with a `vm.overcommit_ratio` of 30 it would | |
739 | yield a CommitLimit of 7.3G. | |
740 | For more details, see the memory overcommit documentation | |
741 | in vm/overcommit-accounting. | |
742 | Committed_AS: The amount of memory presently allocated on the system. | |
743 | The committed memory is a sum of all of the memory which | |
744 | has been allocated by processes, even if it has not been | |
745 | "used" by them as of yet. A process which malloc()'s 1G | |
746 | of memory, but only touches 300M of it will only show up | |
747 | as using 300M of memory even if it has the address space | |
748 | allocated for the entire 1G. This 1G is memory which has | |
749 | been "committed" to by the VM and can be used at any time | |
750 | by the allocating application. With strict overcommit | |
751 | enabled on the system (mode 2 in 'vm.overcommit_memory'), | |
752 | allocations which would exceed the CommitLimit (detailed | |
753 | above) will not be permitted. This is useful if one needs | |
754 | to guarantee that processes will not fail due to lack of | |
755 | memory once that memory has been successfully allocated. | |
1da177e4 LT |
756 | VmallocTotal: total size of vmalloc memory area |
757 | VmallocUsed: amount of vmalloc area which is used | |
19f59460 | 758 | VmallocChunk: largest contiguous block of vmalloc area which is free |
1da177e4 | 759 | |
a47a126a ED |
760 | .............................................................................. |
761 | ||
762 | vmallocinfo: | |
763 | ||
764 | Provides information about vmalloced/vmaped areas. One line per area, | |
765 | containing the virtual address range of the area, size in bytes, | |
766 | caller information of the creator, and optional information depending | |
767 | on the kind of area : | |
768 | ||
769 | pages=nr number of pages | |
770 | phys=addr if a physical address was specified | |
771 | ioremap I/O mapping (ioremap() and friends) | |
772 | vmalloc vmalloc() area | |
773 | vmap vmap()ed pages | |
774 | user VM_USERMAP area | |
775 | vpages buffer for pages pointers was vmalloced (huge area) | |
776 | N<node>=nr (Only on NUMA kernels) | |
777 | Number of pages allocated on memory node <node> | |
778 | ||
779 | > cat /proc/vmallocinfo | |
780 | 0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ... | |
781 | /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128 | |
782 | 0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ... | |
783 | /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64 | |
784 | 0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f... | |
785 | phys=7fee8000 ioremap | |
786 | 0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f... | |
787 | phys=7fee7000 ioremap | |
788 | 0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210 | |
789 | 0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ... | |
790 | /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3 | |
791 | 0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ... | |
792 | pages=2 vmalloc N1=2 | |
793 | 0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ... | |
794 | /0x130 [x_tables] pages=4 vmalloc N0=4 | |
795 | 0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ... | |
796 | pages=14 vmalloc N2=14 | |
797 | 0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ... | |
798 | pages=4 vmalloc N1=4 | |
799 | 0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ... | |
800 | pages=2 vmalloc N1=2 | |
801 | 0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ... | |
802 | pages=10 vmalloc N0=10 | |
1da177e4 | 803 | |
d3d64df2 KK |
804 | .............................................................................. |
805 | ||
806 | softirqs: | |
807 | ||
808 | Provides counts of softirq handlers serviced since boot time, for each cpu. | |
809 | ||
810 | > cat /proc/softirqs | |
811 | CPU0 CPU1 CPU2 CPU3 | |
812 | HI: 0 0 0 0 | |
813 | TIMER: 27166 27120 27097 27034 | |
814 | NET_TX: 0 0 0 17 | |
815 | NET_RX: 42 0 0 39 | |
816 | BLOCK: 0 0 107 1121 | |
817 | TASKLET: 0 0 0 290 | |
818 | SCHED: 27035 26983 26971 26746 | |
819 | HRTIMER: 0 0 0 0 | |
820 | RCU: 1678 1769 2178 2250 | |
821 | ||
822 | ||
1da177e4 LT |
823 | 1.3 IDE devices in /proc/ide |
824 | ---------------------------- | |
825 | ||
826 | The subdirectory /proc/ide contains information about all IDE devices of which | |
827 | the kernel is aware. There is one subdirectory for each IDE controller, the | |
828 | file drivers and a link for each IDE device, pointing to the device directory | |
829 | in the controller specific subtree. | |
830 | ||
831 | The file drivers contains general information about the drivers used for the | |
832 | IDE devices: | |
833 | ||
834 | > cat /proc/ide/drivers | |
835 | ide-cdrom version 4.53 | |
836 | ide-disk version 1.08 | |
837 | ||
838 | More detailed information can be found in the controller specific | |
839 | subdirectories. These are named ide0, ide1 and so on. Each of these | |
349888ee | 840 | directories contains the files shown in table 1-6. |
1da177e4 LT |
841 | |
842 | ||
349888ee | 843 | Table 1-6: IDE controller info in /proc/ide/ide? |
1da177e4 LT |
844 | .............................................................................. |
845 | File Content | |
846 | channel IDE channel (0 or 1) | |
847 | config Configuration (only for PCI/IDE bridge) | |
848 | mate Mate name | |
849 | model Type/Chipset of IDE controller | |
850 | .............................................................................. | |
851 | ||
852 | Each device connected to a controller has a separate subdirectory in the | |
349888ee | 853 | controllers directory. The files listed in table 1-7 are contained in these |
1da177e4 LT |
854 | directories. |
855 | ||
856 | ||
349888ee | 857 | Table 1-7: IDE device information |
1da177e4 LT |
858 | .............................................................................. |
859 | File Content | |
860 | cache The cache | |
861 | capacity Capacity of the medium (in 512Byte blocks) | |
862 | driver driver and version | |
863 | geometry physical and logical geometry | |
864 | identify device identify block | |
865 | media media type | |
866 | model device identifier | |
867 | settings device setup | |
868 | smart_thresholds IDE disk management thresholds | |
869 | smart_values IDE disk management values | |
870 | .............................................................................. | |
871 | ||
872 | The most interesting file is settings. This file contains a nice overview of | |
873 | the drive parameters: | |
874 | ||
875 | # cat /proc/ide/ide0/hda/settings | |
876 | name value min max mode | |
877 | ---- ----- --- --- ---- | |
878 | bios_cyl 526 0 65535 rw | |
879 | bios_head 255 0 255 rw | |
880 | bios_sect 63 0 63 rw | |
881 | breada_readahead 4 0 127 rw | |
882 | bswap 0 0 1 r | |
883 | file_readahead 72 0 2097151 rw | |
884 | io_32bit 0 0 3 rw | |
885 | keepsettings 0 0 1 rw | |
886 | max_kb_per_request 122 1 127 rw | |
887 | multcount 0 0 8 rw | |
888 | nice1 1 0 1 rw | |
889 | nowerr 0 0 1 rw | |
890 | pio_mode write-only 0 255 w | |
891 | slow 0 0 1 rw | |
892 | unmaskirq 0 0 1 rw | |
893 | using_dma 0 0 1 rw | |
894 | ||
895 | ||
896 | 1.4 Networking info in /proc/net | |
897 | -------------------------------- | |
898 | ||
349888ee | 899 | The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the |
1da177e4 | 900 | additional values you get for IP version 6 if you configure the kernel to |
349888ee | 901 | support this. Table 1-9 lists the files and their meaning. |
1da177e4 LT |
902 | |
903 | ||
349888ee | 904 | Table 1-8: IPv6 info in /proc/net |
1da177e4 LT |
905 | .............................................................................. |
906 | File Content | |
907 | udp6 UDP sockets (IPv6) | |
908 | tcp6 TCP sockets (IPv6) | |
909 | raw6 Raw device statistics (IPv6) | |
910 | igmp6 IP multicast addresses, which this host joined (IPv6) | |
911 | if_inet6 List of IPv6 interface addresses | |
912 | ipv6_route Kernel routing table for IPv6 | |
913 | rt6_stats Global IPv6 routing tables statistics | |
914 | sockstat6 Socket statistics (IPv6) | |
915 | snmp6 Snmp data (IPv6) | |
916 | .............................................................................. | |
917 | ||
918 | ||
349888ee | 919 | Table 1-9: Network info in /proc/net |
1da177e4 LT |
920 | .............................................................................. |
921 | File Content | |
922 | arp Kernel ARP table | |
923 | dev network devices with statistics | |
924 | dev_mcast the Layer2 multicast groups a device is listening too | |
925 | (interface index, label, number of references, number of bound | |
926 | addresses). | |
927 | dev_stat network device status | |
928 | ip_fwchains Firewall chain linkage | |
929 | ip_fwnames Firewall chain names | |
930 | ip_masq Directory containing the masquerading tables | |
931 | ip_masquerade Major masquerading table | |
932 | netstat Network statistics | |
933 | raw raw device statistics | |
934 | route Kernel routing table | |
935 | rpc Directory containing rpc info | |
936 | rt_cache Routing cache | |
937 | snmp SNMP data | |
938 | sockstat Socket statistics | |
939 | tcp TCP sockets | |
940 | tr_rif Token ring RIF routing table | |
941 | udp UDP sockets | |
942 | unix UNIX domain sockets | |
943 | wireless Wireless interface data (Wavelan etc) | |
944 | igmp IP multicast addresses, which this host joined | |
945 | psched Global packet scheduler parameters. | |
946 | netlink List of PF_NETLINK sockets | |
947 | ip_mr_vifs List of multicast virtual interfaces | |
948 | ip_mr_cache List of multicast routing cache | |
949 | .............................................................................. | |
950 | ||
951 | You can use this information to see which network devices are available in | |
952 | your system and how much traffic was routed over those devices: | |
953 | ||
954 | > cat /proc/net/dev | |
955 | Inter-|Receive |[... | |
956 | face |bytes packets errs drop fifo frame compressed multicast|[... | |
957 | lo: 908188 5596 0 0 0 0 0 0 [... | |
958 | ppp0:15475140 20721 410 0 0 410 0 0 [... | |
959 | eth0: 614530 7085 0 0 0 0 0 1 [... | |
960 | ||
961 | ...] Transmit | |
962 | ...] bytes packets errs drop fifo colls carrier compressed | |
963 | ...] 908188 5596 0 0 0 0 0 0 | |
964 | ...] 1375103 17405 0 0 0 0 0 0 | |
965 | ...] 1703981 5535 0 0 0 3 0 0 | |
966 | ||
967 | In addition, each Channel Bond interface has it's own directory. For | |
968 | example, the bond0 device will have a directory called /proc/net/bond0/. | |
969 | It will contain information that is specific to that bond, such as the | |
970 | current slaves of the bond, the link status of the slaves, and how | |
971 | many times the slaves link has failed. | |
972 | ||
973 | 1.5 SCSI info | |
974 | ------------- | |
975 | ||
976 | If you have a SCSI host adapter in your system, you'll find a subdirectory | |
977 | named after the driver for this adapter in /proc/scsi. You'll also see a list | |
978 | of all recognized SCSI devices in /proc/scsi: | |
979 | ||
980 | >cat /proc/scsi/scsi | |
981 | Attached devices: | |
982 | Host: scsi0 Channel: 00 Id: 00 Lun: 00 | |
983 | Vendor: IBM Model: DGHS09U Rev: 03E0 | |
984 | Type: Direct-Access ANSI SCSI revision: 03 | |
985 | Host: scsi0 Channel: 00 Id: 06 Lun: 00 | |
986 | Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04 | |
987 | Type: CD-ROM ANSI SCSI revision: 02 | |
988 | ||
989 | ||
990 | The directory named after the driver has one file for each adapter found in | |
991 | the system. These files contain information about the controller, including | |
992 | the used IRQ and the IO address range. The amount of information shown is | |
993 | dependent on the adapter you use. The example shows the output for an Adaptec | |
994 | AHA-2940 SCSI adapter: | |
995 | ||
996 | > cat /proc/scsi/aic7xxx/0 | |
997 | ||
998 | Adaptec AIC7xxx driver version: 5.1.19/3.2.4 | |
999 | Compile Options: | |
1000 | TCQ Enabled By Default : Disabled | |
1001 | AIC7XXX_PROC_STATS : Disabled | |
1002 | AIC7XXX_RESET_DELAY : 5 | |
1003 | Adapter Configuration: | |
1004 | SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter | |
1005 | Ultra Wide Controller | |
1006 | PCI MMAPed I/O Base: 0xeb001000 | |
1007 | Adapter SEEPROM Config: SEEPROM found and used. | |
1008 | Adaptec SCSI BIOS: Enabled | |
1009 | IRQ: 10 | |
1010 | SCBs: Active 0, Max Active 2, | |
1011 | Allocated 15, HW 16, Page 255 | |
1012 | Interrupts: 160328 | |
1013 | BIOS Control Word: 0x18b6 | |
1014 | Adapter Control Word: 0x005b | |
1015 | Extended Translation: Enabled | |
1016 | Disconnect Enable Flags: 0xffff | |
1017 | Ultra Enable Flags: 0x0001 | |
1018 | Tag Queue Enable Flags: 0x0000 | |
1019 | Ordered Queue Tag Flags: 0x0000 | |
1020 | Default Tag Queue Depth: 8 | |
1021 | Tagged Queue By Device array for aic7xxx host instance 0: | |
1022 | {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255} | |
1023 | Actual queue depth per device for aic7xxx host instance 0: | |
1024 | {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1} | |
1025 | Statistics: | |
1026 | (scsi0:0:0:0) | |
1027 | Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8 | |
1028 | Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0) | |
1029 | Total transfers 160151 (74577 reads and 85574 writes) | |
1030 | (scsi0:0:6:0) | |
1031 | Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15 | |
1032 | Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0) | |
1033 | Total transfers 0 (0 reads and 0 writes) | |
1034 | ||
1035 | ||
1036 | 1.6 Parallel port info in /proc/parport | |
1037 | --------------------------------------- | |
1038 | ||
1039 | The directory /proc/parport contains information about the parallel ports of | |
1040 | your system. It has one subdirectory for each port, named after the port | |
1041 | number (0,1,2,...). | |
1042 | ||
349888ee | 1043 | These directories contain the four files shown in Table 1-10. |
1da177e4 LT |
1044 | |
1045 | ||
349888ee | 1046 | Table 1-10: Files in /proc/parport |
1da177e4 LT |
1047 | .............................................................................. |
1048 | File Content | |
1049 | autoprobe Any IEEE-1284 device ID information that has been acquired. | |
1050 | devices list of the device drivers using that port. A + will appear by the | |
1051 | name of the device currently using the port (it might not appear | |
1052 | against any). | |
1053 | hardware Parallel port's base address, IRQ line and DMA channel. | |
1054 | irq IRQ that parport is using for that port. This is in a separate | |
1055 | file to allow you to alter it by writing a new value in (IRQ | |
1056 | number or none). | |
1057 | .............................................................................. | |
1058 | ||
1059 | 1.7 TTY info in /proc/tty | |
1060 | ------------------------- | |
1061 | ||
1062 | Information about the available and actually used tty's can be found in the | |
1063 | directory /proc/tty.You'll find entries for drivers and line disciplines in | |
349888ee | 1064 | this directory, as shown in Table 1-11. |
1da177e4 LT |
1065 | |
1066 | ||
349888ee | 1067 | Table 1-11: Files in /proc/tty |
1da177e4 LT |
1068 | .............................................................................. |
1069 | File Content | |
1070 | drivers list of drivers and their usage | |
1071 | ldiscs registered line disciplines | |
1072 | driver/serial usage statistic and status of single tty lines | |
1073 | .............................................................................. | |
1074 | ||
1075 | To see which tty's are currently in use, you can simply look into the file | |
1076 | /proc/tty/drivers: | |
1077 | ||
1078 | > cat /proc/tty/drivers | |
1079 | pty_slave /dev/pts 136 0-255 pty:slave | |
1080 | pty_master /dev/ptm 128 0-255 pty:master | |
1081 | pty_slave /dev/ttyp 3 0-255 pty:slave | |
1082 | pty_master /dev/pty 2 0-255 pty:master | |
1083 | serial /dev/cua 5 64-67 serial:callout | |
1084 | serial /dev/ttyS 4 64-67 serial | |
1085 | /dev/tty0 /dev/tty0 4 0 system:vtmaster | |
1086 | /dev/ptmx /dev/ptmx 5 2 system | |
1087 | /dev/console /dev/console 5 1 system:console | |
1088 | /dev/tty /dev/tty 5 0 system:/dev/tty | |
1089 | unknown /dev/tty 4 1-63 console | |
1090 | ||
1091 | ||
1092 | 1.8 Miscellaneous kernel statistics in /proc/stat | |
1093 | ------------------------------------------------- | |
1094 | ||
1095 | Various pieces of information about kernel activity are available in the | |
1096 | /proc/stat file. All of the numbers reported in this file are aggregates | |
1097 | since the system first booted. For a quick look, simply cat the file: | |
1098 | ||
1099 | > cat /proc/stat | |
c574358e ED |
1100 | cpu 2255 34 2290 22625563 6290 127 456 0 0 |
1101 | cpu0 1132 34 1441 11311718 3675 127 438 0 0 | |
1102 | cpu1 1123 0 849 11313845 2614 0 18 0 0 | |
1da177e4 LT |
1103 | intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...] |
1104 | ctxt 1990473 | |
1105 | btime 1062191376 | |
1106 | processes 2915 | |
1107 | procs_running 1 | |
1108 | procs_blocked 0 | |
d3d64df2 | 1109 | softirq 183433 0 21755 12 39 1137 231 21459 2263 |
1da177e4 LT |
1110 | |
1111 | The very first "cpu" line aggregates the numbers in all of the other "cpuN" | |
1112 | lines. These numbers identify the amount of time the CPU has spent performing | |
1113 | different kinds of work. Time units are in USER_HZ (typically hundredths of a | |
1114 | second). The meanings of the columns are as follows, from left to right: | |
1115 | ||
1116 | - user: normal processes executing in user mode | |
1117 | - nice: niced processes executing in user mode | |
1118 | - system: processes executing in kernel mode | |
1119 | - idle: twiddling thumbs | |
1120 | - iowait: waiting for I/O to complete | |
1121 | - irq: servicing interrupts | |
1122 | - softirq: servicing softirqs | |
b68f2c3a | 1123 | - steal: involuntary wait |
ce0e7b28 RO |
1124 | - guest: running a normal guest |
1125 | - guest_nice: running a niced guest | |
1da177e4 LT |
1126 | |
1127 | The "intr" line gives counts of interrupts serviced since boot time, for each | |
1128 | of the possible system interrupts. The first column is the total of all | |
1129 | interrupts serviced; each subsequent column is the total for that particular | |
1130 | interrupt. | |
1131 | ||
1132 | The "ctxt" line gives the total number of context switches across all CPUs. | |
1133 | ||
1134 | The "btime" line gives the time at which the system booted, in seconds since | |
1135 | the Unix epoch. | |
1136 | ||
1137 | The "processes" line gives the number of processes and threads created, which | |
1138 | includes (but is not limited to) those created by calls to the fork() and | |
1139 | clone() system calls. | |
1140 | ||
e3cc2226 LGE |
1141 | The "procs_running" line gives the total number of threads that are |
1142 | running or ready to run (i.e., the total number of runnable threads). | |
1da177e4 LT |
1143 | |
1144 | The "procs_blocked" line gives the number of processes currently blocked, | |
1145 | waiting for I/O to complete. | |
1146 | ||
d3d64df2 KK |
1147 | The "softirq" line gives counts of softirqs serviced since boot time, for each |
1148 | of the possible system softirqs. The first column is the total of all | |
1149 | softirqs serviced; each subsequent column is the total for that particular | |
1150 | softirq. | |
1151 | ||
37515fac | 1152 | |
c9de560d AT |
1153 | 1.9 Ext4 file system parameters |
1154 | ------------------------------ | |
37515fac TT |
1155 | |
1156 | Information about mounted ext4 file systems can be found in | |
1157 | /proc/fs/ext4. Each mounted filesystem will have a directory in | |
1158 | /proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or | |
1159 | /proc/fs/ext4/dm-0). The files in each per-device directory are shown | |
349888ee | 1160 | in Table 1-12, below. |
37515fac | 1161 | |
349888ee | 1162 | Table 1-12: Files in /proc/fs/ext4/<devname> |
37515fac TT |
1163 | .............................................................................. |
1164 | File Content | |
1165 | mb_groups details of multiblock allocator buddy cache of free blocks | |
37515fac TT |
1166 | .............................................................................. |
1167 | ||
1da177e4 LT |
1168 | |
1169 | ------------------------------------------------------------------------------ | |
1170 | Summary | |
1171 | ------------------------------------------------------------------------------ | |
1172 | The /proc file system serves information about the running system. It not only | |
1173 | allows access to process data but also allows you to request the kernel status | |
1174 | by reading files in the hierarchy. | |
1175 | ||
1176 | The directory structure of /proc reflects the types of information and makes | |
1177 | it easy, if not obvious, where to look for specific data. | |
1178 | ------------------------------------------------------------------------------ | |
1179 | ||
1180 | ------------------------------------------------------------------------------ | |
1181 | CHAPTER 2: MODIFYING SYSTEM PARAMETERS | |
1182 | ------------------------------------------------------------------------------ | |
1183 | ||
1184 | ------------------------------------------------------------------------------ | |
1185 | In This Chapter | |
1186 | ------------------------------------------------------------------------------ | |
1187 | * Modifying kernel parameters by writing into files found in /proc/sys | |
1188 | * Exploring the files which modify certain parameters | |
1189 | * Review of the /proc/sys file tree | |
1190 | ------------------------------------------------------------------------------ | |
1191 | ||
1192 | ||
1193 | A very interesting part of /proc is the directory /proc/sys. This is not only | |
1194 | a source of information, it also allows you to change parameters within the | |
1195 | kernel. Be very careful when attempting this. You can optimize your system, | |
1196 | but you can also cause it to crash. Never alter kernel parameters on a | |
1197 | production system. Set up a development machine and test to make sure that | |
1198 | everything works the way you want it to. You may have no alternative but to | |
1199 | reboot the machine once an error has been made. | |
1200 | ||
1201 | To change a value, simply echo the new value into the file. An example is | |
1202 | given below in the section on the file system data. You need to be root to do | |
1203 | this. You can create your own boot script to perform this every time your | |
1204 | system boots. | |
1205 | ||
1206 | The files in /proc/sys can be used to fine tune and monitor miscellaneous and | |
1207 | general things in the operation of the Linux kernel. Since some of the files | |
1208 | can inadvertently disrupt your system, it is advisable to read both | |
1209 | documentation and source before actually making adjustments. In any case, be | |
1210 | very careful when writing to any of these files. The entries in /proc may | |
1211 | change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt | |
1212 | review the kernel documentation in the directory /usr/src/linux/Documentation. | |
1213 | This chapter is heavily based on the documentation included in the pre 2.2 | |
1214 | kernels, and became part of it in version 2.2.1 of the Linux kernel. | |
1215 | ||
760df93e | 1216 | Please see: Documentation/sysctls/ directory for descriptions of these |
db0fb184 | 1217 | entries. |
9d0243bc | 1218 | |
760df93e SF |
1219 | ------------------------------------------------------------------------------ |
1220 | Summary | |
1221 | ------------------------------------------------------------------------------ | |
1222 | Certain aspects of kernel behavior can be modified at runtime, without the | |
1223 | need to recompile the kernel, or even to reboot the system. The files in the | |
1224 | /proc/sys tree can not only be read, but also modified. You can use the echo | |
1225 | command to write value into these files, thereby changing the default settings | |
1226 | of the kernel. | |
1227 | ------------------------------------------------------------------------------ | |
9d0243bc | 1228 | |
760df93e SF |
1229 | ------------------------------------------------------------------------------ |
1230 | CHAPTER 3: PER-PROCESS PARAMETERS | |
1231 | ------------------------------------------------------------------------------ | |
1da177e4 | 1232 | |
760df93e | 1233 | 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score |
d7ff0dbf JFM |
1234 | ------------------------------------------------------ |
1235 | ||
0753ba01 KM |
1236 | This file can be used to adjust the score used to select which processes |
1237 | should be killed in an out-of-memory situation. Giving it a high score will | |
1238 | increase the likelihood of this process being killed by the oom-killer. Valid | |
1239 | values are in the range -16 to +15, plus the special value -17, which disables | |
1240 | oom-killing altogether for this process. | |
d7ff0dbf | 1241 | |
9e9e3cbc EP |
1242 | The process to be killed in an out-of-memory situation is selected among all others |
1243 | based on its badness score. This value equals the original memory size of the process | |
1244 | and is then updated according to its CPU time (utime + stime) and the | |
1245 | run time (uptime - start time). The longer it runs the smaller is the score. | |
1246 | Badness score is divided by the square root of the CPU time and then by | |
1247 | the double square root of the run time. | |
1248 | ||
1249 | Swapped out tasks are killed first. Half of each child's memory size is added to | |
1250 | the parent's score if they do not share the same memory. Thus forking servers | |
1251 | are the prime candidates to be killed. Having only one 'hungry' child will make | |
1252 | parent less preferable than the child. | |
1253 | ||
1254 | /proc/<pid>/oom_score shows process' current badness score. | |
1255 | ||
1256 | The following heuristics are then applied: | |
1257 | * if the task was reniced, its score doubles | |
1258 | * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE | |
1259 | or CAP_SYS_RAWIO) have their score divided by 4 | |
495789a5 | 1260 | * if oom condition happened in one cpuset and checked process does not belong |
9e9e3cbc EP |
1261 | to it, its score is divided by 8 |
1262 | * the resulting score is multiplied by two to the power of oom_adj, i.e. | |
1263 | points <<= oom_adj when it is positive and | |
1264 | points >>= -(oom_adj) otherwise | |
1265 | ||
1266 | The task with the highest badness score is then selected and its children | |
1267 | are killed, process itself will be killed in an OOM situation when it does | |
1268 | not have children or some of them disabled oom like described above. | |
1269 | ||
760df93e | 1270 | 3.2 /proc/<pid>/oom_score - Display current oom-killer score |
d7ff0dbf JFM |
1271 | ------------------------------------------------------------- |
1272 | ||
d7ff0dbf JFM |
1273 | This file can be used to check the current score used by the oom-killer is for |
1274 | any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which | |
1275 | process should be killed in an out-of-memory situation. | |
1da177e4 | 1276 | |
f9c99463 | 1277 | |
760df93e | 1278 | 3.3 /proc/<pid>/io - Display the IO accounting fields |
f9c99463 RK |
1279 | ------------------------------------------------------- |
1280 | ||
1281 | This file contains IO statistics for each running process | |
1282 | ||
1283 | Example | |
1284 | ------- | |
1285 | ||
1286 | test:/tmp # dd if=/dev/zero of=/tmp/test.dat & | |
1287 | [1] 3828 | |
1288 | ||
1289 | test:/tmp # cat /proc/3828/io | |
1290 | rchar: 323934931 | |
1291 | wchar: 323929600 | |
1292 | syscr: 632687 | |
1293 | syscw: 632675 | |
1294 | read_bytes: 0 | |
1295 | write_bytes: 323932160 | |
1296 | cancelled_write_bytes: 0 | |
1297 | ||
1298 | ||
1299 | Description | |
1300 | ----------- | |
1301 | ||
1302 | rchar | |
1303 | ----- | |
1304 | ||
1305 | I/O counter: chars read | |
1306 | The number of bytes which this task has caused to be read from storage. This | |
1307 | is simply the sum of bytes which this process passed to read() and pread(). | |
1308 | It includes things like tty IO and it is unaffected by whether or not actual | |
1309 | physical disk IO was required (the read might have been satisfied from | |
1310 | pagecache) | |
1311 | ||
1312 | ||
1313 | wchar | |
1314 | ----- | |
1315 | ||
1316 | I/O counter: chars written | |
1317 | The number of bytes which this task has caused, or shall cause to be written | |
1318 | to disk. Similar caveats apply here as with rchar. | |
1319 | ||
1320 | ||
1321 | syscr | |
1322 | ----- | |
1323 | ||
1324 | I/O counter: read syscalls | |
1325 | Attempt to count the number of read I/O operations, i.e. syscalls like read() | |
1326 | and pread(). | |
1327 | ||
1328 | ||
1329 | syscw | |
1330 | ----- | |
1331 | ||
1332 | I/O counter: write syscalls | |
1333 | Attempt to count the number of write I/O operations, i.e. syscalls like | |
1334 | write() and pwrite(). | |
1335 | ||
1336 | ||
1337 | read_bytes | |
1338 | ---------- | |
1339 | ||
1340 | I/O counter: bytes read | |
1341 | Attempt to count the number of bytes which this process really did cause to | |
1342 | be fetched from the storage layer. Done at the submit_bio() level, so it is | |
1343 | accurate for block-backed filesystems. <please add status regarding NFS and | |
1344 | CIFS at a later time> | |
1345 | ||
1346 | ||
1347 | write_bytes | |
1348 | ----------- | |
1349 | ||
1350 | I/O counter: bytes written | |
1351 | Attempt to count the number of bytes which this process caused to be sent to | |
1352 | the storage layer. This is done at page-dirtying time. | |
1353 | ||
1354 | ||
1355 | cancelled_write_bytes | |
1356 | --------------------- | |
1357 | ||
1358 | The big inaccuracy here is truncate. If a process writes 1MB to a file and | |
1359 | then deletes the file, it will in fact perform no writeout. But it will have | |
1360 | been accounted as having caused 1MB of write. | |
1361 | In other words: The number of bytes which this process caused to not happen, | |
1362 | by truncating pagecache. A task can cause "negative" IO too. If this task | |
1363 | truncates some dirty pagecache, some IO which another task has been accounted | |
1364 | for (in it's write_bytes) will not be happening. We _could_ just subtract that | |
1365 | from the truncating task's write_bytes, but there is information loss in doing | |
1366 | that. | |
1367 | ||
1368 | ||
1369 | Note | |
1370 | ---- | |
1371 | ||
1372 | At its current implementation state, this is a bit racy on 32-bit machines: if | |
1373 | process A reads process B's /proc/pid/io while process B is updating one of | |
1374 | those 64-bit counters, process A could see an intermediate result. | |
1375 | ||
1376 | ||
1377 | More information about this can be found within the taskstats documentation in | |
1378 | Documentation/accounting. | |
1379 | ||
760df93e | 1380 | 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings |
bb90110d KH |
1381 | --------------------------------------------------------------- |
1382 | When a process is dumped, all anonymous memory is written to a core file as | |
1383 | long as the size of the core file isn't limited. But sometimes we don't want | |
1384 | to dump some memory segments, for example, huge shared memory. Conversely, | |
1385 | sometimes we want to save file-backed memory segments into a core file, not | |
1386 | only the individual files. | |
1387 | ||
1388 | /proc/<pid>/coredump_filter allows you to customize which memory segments | |
1389 | will be dumped when the <pid> process is dumped. coredump_filter is a bitmask | |
1390 | of memory types. If a bit of the bitmask is set, memory segments of the | |
1391 | corresponding memory type are dumped, otherwise they are not dumped. | |
1392 | ||
e575f111 | 1393 | The following 7 memory types are supported: |
bb90110d KH |
1394 | - (bit 0) anonymous private memory |
1395 | - (bit 1) anonymous shared memory | |
1396 | - (bit 2) file-backed private memory | |
1397 | - (bit 3) file-backed shared memory | |
b261dfea HK |
1398 | - (bit 4) ELF header pages in file-backed private memory areas (it is |
1399 | effective only if the bit 2 is cleared) | |
e575f111 KM |
1400 | - (bit 5) hugetlb private memory |
1401 | - (bit 6) hugetlb shared memory | |
bb90110d KH |
1402 | |
1403 | Note that MMIO pages such as frame buffer are never dumped and vDSO pages | |
1404 | are always dumped regardless of the bitmask status. | |
1405 | ||
e575f111 KM |
1406 | Note bit 0-4 doesn't effect any hugetlb memory. hugetlb memory are only |
1407 | effected by bit 5-6. | |
1408 | ||
1409 | Default value of coredump_filter is 0x23; this means all anonymous memory | |
1410 | segments and hugetlb private memory are dumped. | |
bb90110d KH |
1411 | |
1412 | If you don't want to dump all shared memory segments attached to pid 1234, | |
e575f111 | 1413 | write 0x21 to the process's proc file. |
bb90110d | 1414 | |
e575f111 | 1415 | $ echo 0x21 > /proc/1234/coredump_filter |
bb90110d KH |
1416 | |
1417 | When a new process is created, the process inherits the bitmask status from its | |
1418 | parent. It is useful to set up coredump_filter before the program runs. | |
1419 | For example: | |
1420 | ||
1421 | $ echo 0x7 > /proc/self/coredump_filter | |
1422 | $ ./some_program | |
1423 | ||
760df93e | 1424 | 3.5 /proc/<pid>/mountinfo - Information about mounts |
2d4d4864 RP |
1425 | -------------------------------------------------------- |
1426 | ||
1427 | This file contains lines of the form: | |
1428 | ||
1429 | 36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue | |
1430 | (1)(2)(3) (4) (5) (6) (7) (8) (9) (10) (11) | |
1431 | ||
1432 | (1) mount ID: unique identifier of the mount (may be reused after umount) | |
1433 | (2) parent ID: ID of parent (or of self for the top of the mount tree) | |
1434 | (3) major:minor: value of st_dev for files on filesystem | |
1435 | (4) root: root of the mount within the filesystem | |
1436 | (5) mount point: mount point relative to the process's root | |
1437 | (6) mount options: per mount options | |
1438 | (7) optional fields: zero or more fields of the form "tag[:value]" | |
1439 | (8) separator: marks the end of the optional fields | |
1440 | (9) filesystem type: name of filesystem of the form "type[.subtype]" | |
1441 | (10) mount source: filesystem specific information or "none" | |
1442 | (11) super options: per super block options | |
1443 | ||
1444 | Parsers should ignore all unrecognised optional fields. Currently the | |
1445 | possible optional fields are: | |
1446 | ||
1447 | shared:X mount is shared in peer group X | |
1448 | master:X mount is slave to peer group X | |
97e7e0f7 | 1449 | propagate_from:X mount is slave and receives propagation from peer group X (*) |
2d4d4864 RP |
1450 | unbindable mount is unbindable |
1451 | ||
97e7e0f7 MS |
1452 | (*) X is the closest dominant peer group under the process's root. If |
1453 | X is the immediate master of the mount, or if there's no dominant peer | |
1454 | group under the same root, then only the "master:X" field is present | |
1455 | and not the "propagate_from:X" field. | |
1456 | ||
2d4d4864 RP |
1457 | For more information on mount propagation see: |
1458 | ||
1459 | Documentation/filesystems/sharedsubtree.txt | |
1460 | ||
4614a696 | 1461 | |
1462 | 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm | |
1463 | -------------------------------------------------------- | |
1464 | These files provide a method to access a tasks comm value. It also allows for | |
1465 | a task to set its own or one of its thread siblings comm value. The comm value | |
1466 | is limited in size compared to the cmdline value, so writing anything longer | |
1467 | then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated | |
1468 | comm value. |