projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 1b55d622 RJ |
1 | * Broadcom iProc PCIe controller with the platform bus interface |
| 2 | ||
| 3 | Required properties: | |
| 4 | - compatible: Must be "brcm,iproc-pcie" | |
| 5 | - reg: base address and length of the PCIe controller I/O register space | |
| 6 | - #interrupt-cells: set to <1> | |
| 7 | - interrupt-map-mask and interrupt-map, standard PCI properties to define the | |
| 8 | mapping of the PCIe interface to interrupt numbers | |
| 9 | - linux,pci-domain: PCI domain ID. Should be unique for each host controller | |
| 10 | - bus-range: PCI bus numbers covered | |
| 11 | - #address-cells: set to <3> | |
| 12 | - #size-cells: set to <2> | |
| 13 | - device_type: set to "pci" | |
| 14 | - ranges: ranges for the PCI memory and I/O regions | |
| 15 | ||
| 16 | Optional properties: | |
| 17 | - phys: phandle of the PCIe PHY device | |
| 18 | - phy-names: must be "pcie-phy" | |
| 19 | ||
| 8d0afa1a RJ |
20 | - brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done |
| 21 | by the ASIC after power on reset. In this case, SW needs to configure it | |
| 22 | ||
| 23 | If the brcm,pcie-ob property is present, the following properties become | |
| 24 | effective: | |
| 25 | ||
| 26 | Required: | |
| 27 | - brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal | |
| 28 | address used by the iProc PCIe core (not the PCIe address) | |
| 29 | - brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) | |
| 30 | ||
| 31 | Optional: | |
| 32 | - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to | |
| 33 | increase the outbound window size | |
| 34 | ||
| 1b55d622 RJ |
35 | Example: |
| 36 | pcie0: pcie@18012000 { | |
| 37 | compatible = "brcm,iproc-pcie"; | |
| 38 | reg = <0x18012000 0x1000>; | |
| 39 | ||
| 40 | #interrupt-cells = <1>; | |
| 41 | interrupt-map-mask = <0 0 0 0>; | |
| 42 | interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; | |
| 43 | ||
| 44 | linux,pci-domain = <0>; | |
| 45 | ||
| 46 | bus-range = <0x00 0xff>; | |
| 47 | ||
| 48 | #address-cells = <3>; | |
| 49 | #size-cells = <2>; | |
| 50 | device_type = "pci"; | |
| 51 | ranges = <0x81000000 0 0 0x28000000 0 0x00010000 | |
| 52 | 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; | |
| 53 | ||
| 54 | phys = <&phy 0 5>; | |
| 55 | phy-names = "pcie-phy"; | |
| 8d0afa1a RJ |
56 | |
| 57 | brcm,pcie-ob; | |
| 58 | brcm,pcie-ob-oarr-size; | |
| 59 | brcm,pcie-ob-axi-offset = <0x00000000>; | |
| 60 | brcm,pcie-ob-window-size = <256>; | |
| 1b55d622 RJ |
61 | }; |
| 62 | ||
| 63 | pcie1: pcie@18013000 { | |
| 64 | compatible = "brcm,iproc-pcie"; | |
| 65 | reg = <0x18013000 0x1000>; | |
| 66 | ||
| 67 | #interrupt-cells = <1>; | |
| 68 | interrupt-map-mask = <0 0 0 0>; | |
| 69 | interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; | |
| 70 | ||
| 71 | linux,pci-domain = <1>; | |
| 72 | ||
| 73 | bus-range = <0x00 0xff>; | |
| 74 | ||
| 75 | #address-cells = <3>; | |
| 76 | #size-cells = <2>; | |
| 77 | device_type = "pci"; | |
| 78 | ranges = <0x81000000 0 0 0x48000000 0 0x00010000 | |
| 79 | 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; | |
| 80 | ||
| 81 | phys = <&phy 1 6>; | |
| 82 | phy-names = "pcie-phy"; | |
| 83 | }; |