[linux-2.6-block.git] / Documentation / devicetree / bindings / net / micrel-ks8995.txt

Micrel KS8995 SPI controlled Ethernet Switch families

Required properties (according to spi-bus.txt):
- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"

Optional properties:
- reset-gpios : phandle of gpio that will be used to reset chip during probe

Example:

spi-master {
	...
	switch@0 {
		compatible = "micrel,ksz8795";

		reg = <0>;
		spi-max-frequency = <50000000>;
		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
	};
};
Commit	Line	Data
7e406d12 HB	1	Micrel KS8995 SPI controlled Ethernet Switch families
	2
	3	Required properties (according to spi-bus.txt):
	4	- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"
	5
	6	Optional properties:
	7	- reset-gpios : phandle of gpio that will be used to reset chip during probe
	8
	9	Example:
	10
	11	spi-master {
	12	...
	13	switch@0 {
	14	compatible = "micrel,ksz8795";
	15
	16	reg = <0>;
	17	spi-max-frequency = <50000000>;
	18	reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
	19	};
	20	};