Commit | Line | Data |
---|---|---|
22a93562 PZ |
1 | Toshiba TC358767 eDP bridge bindings |
2 | ||
3 | Required properties: | |
4 | - compatible: "toshiba,tc358767" | |
5 | - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins | |
6 | - clock-names: should be "ref" | |
7 | - clocks: OF device-tree clock specification for refclk input. The reference | |
8 | clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. | |
9 | ||
10 | Optional properties: | |
11 | - shutdown-gpios: OF device-tree gpio specification for SD pin | |
12 | (active high shutdown input) | |
13 | - reset-gpios: OF device-tree gpio specification for RSTX pin | |
14 | (active low system reset) | |
15 | - ports: the ports node can contain video interface port nodes to connect | |
16 | to a DPI/DSI source and to an eDP/DP sink according to [1][2]: | |
17 | - port@0: DSI input port | |
18 | - port@1: DPI input port | |
19 | - port@2: eDP/DP output port | |
20 | ||
21 | [1]: Documentation/devicetree/bindings/graph.txt | |
22 | [2]: Documentation/devicetree/bindings/media/video-interfaces.txt | |
23 | ||
24 | Example: | |
25 | edp-bridge@68 { | |
26 | compatible = "toshiba,tc358767"; | |
27 | reg = <0x68>; | |
28 | shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; | |
29 | reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; | |
30 | clock-names = "ref"; | |
31 | clocks = <&edp_refclk>; | |
32 | ||
33 | ports { | |
34 | #address-cells = <1>; | |
35 | #size-cells = <0>; | |
36 | ||
37 | port@1 { | |
38 | reg = <1>; | |
39 | ||
40 | bridge_in: endpoint { | |
41 | remote-endpoint = <&dpi_out>; | |
42 | }; | |
43 | }; | |
44 | ||
45 | port@2 { | |
46 | reg = <2>; | |
47 | ||
48 | bridge_out: endpoint { | |
49 | remote-endpoint = <&panel_in>; | |
50 | }; | |
51 | }; | |
52 | }; | |
53 | }; |