projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge branch 'bcmgenet-add-support-for-GENETv5'
[linux-2.6-block.git] / Documentation / admin-guide / devices.txt
CommitLineData
07c7e30c
JN		 1 0 Unnamed devices (e.g. non-device mounts)
2 0 = reserved as null device number
3 See block major 144, 145, 146 for expansion areas.
4
5 1 char Memory devices
6 1 = /dev/mem Physical memory access
7 2 = /dev/kmem Kernel virtual memory access
8 3 = /dev/null Null device
9 4 = /dev/port I/O port access
10 5 = /dev/zero Null byte source
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
12 7 = /dev/full Returns ENOSPC on write
13 8 = /dev/random Nondeterministic random number gen.
14 9 = /dev/urandom Faster, less secure random number gen.
15 10 = /dev/aio Asynchronous I/O notification interface
16 11 = /dev/kmsg Writes to this come out as printk's, reads
17 export the buffered printk records.
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
19
20 1 block RAM disk
21 0 = /dev/ram0 First RAM disk
22 1 = /dev/ram1 Second RAM disk
23 ...
24 250 = /dev/initrd Initial RAM disk
25
26 Older kernels had /dev/ramdisk (1, 1) here.
27 /dev/initrd refers to a RAM disk which was preloaded
28 by the boot loader; newer kernels use /dev/ram0 for
29 the initrd.
30
31 2 char Pseudo-TTY masters
32 0 = /dev/ptyp0 First PTY master
33 1 = /dev/ptyp1 Second PTY master
34 ...
35 255 = /dev/ptyef 256th PTY master
36
37 Pseudo-tty's are named as follows:
38 * Masters are "pty", slaves are "tty";
39 * the fourth letter is one of pqrstuvwxyzabcde indicating
40 the 1st through 16th series of 16 pseudo-ttys each, and
41 * the fifth letter is one of 0123456789abcdef indicating
42 the position within the series.
43
44 These are the old-style (BSD) PTY devices; Unix98
45 devices are on major 128 and above and use the PTY
46 master multiplex (/dev/ptmx) to acquire a PTY on
47 demand.
48
49 2 block Floppy disks
50 0 = /dev/fd0 Controller 0, drive 0, autodetect
51 1 = /dev/fd1 Controller 0, drive 1, autodetect
52 2 = /dev/fd2 Controller 0, drive 2, autodetect
53 3 = /dev/fd3 Controller 0, drive 3, autodetect
54 128 = /dev/fd4 Controller 1, drive 0, autodetect
55 129 = /dev/fd5 Controller 1, drive 1, autodetect
56 130 = /dev/fd6 Controller 1, drive 2, autodetect
57 131 = /dev/fd7 Controller 1, drive 3, autodetect
58
59 To specify format, add to the autodetect device number:
60 0 = /dev/fd? Autodetect format
61 4 = /dev/fd?d360 5.25" 360K in a 360K drive(1)
62 20 = /dev/fd?h360 5.25" 360K in a 1200K drive(1)
63 48 = /dev/fd?h410 5.25" 410K in a 1200K drive
64 64 = /dev/fd?h420 5.25" 420K in a 1200K drive
65 24 = /dev/fd?h720 5.25" 720K in a 1200K drive
66 80 = /dev/fd?h880 5.25" 880K in a 1200K drive(1)
67 8 = /dev/fd?h1200 5.25" 1200K in a 1200K drive(1)
68 40 = /dev/fd?h1440 5.25" 1440K in a 1200K drive(1)
69 56 = /dev/fd?h1476 5.25" 1476K in a 1200K drive
70 72 = /dev/fd?h1494 5.25" 1494K in a 1200K drive
71 92 = /dev/fd?h1600 5.25" 1600K in a 1200K drive(1)
72
73 12 = /dev/fd?u360 3.5" 360K Double Density(2)
74 16 = /dev/fd?u720 3.5" 720K Double Density(1)
75 120 = /dev/fd?u800 3.5" 800K Double Density(2)
76 52 = /dev/fd?u820 3.5" 820K Double Density
77 68 = /dev/fd?u830 3.5" 830K Double Density
78 84 = /dev/fd?u1040 3.5" 1040K Double Density(1)
79 88 = /dev/fd?u1120 3.5" 1120K Double Density(1)
80 28 = /dev/fd?u1440 3.5" 1440K High Density(1)
81 124 = /dev/fd?u1600 3.5" 1600K High Density(1)
82 44 = /dev/fd?u1680 3.5" 1680K High Density(3)
83 60 = /dev/fd?u1722 3.5" 1722K High Density
84 76 = /dev/fd?u1743 3.5" 1743K High Density
85 96 = /dev/fd?u1760 3.5" 1760K High Density
86 116 = /dev/fd?u1840 3.5" 1840K High Density(3)
87 100 = /dev/fd?u1920 3.5" 1920K High Density(1)
88 32 = /dev/fd?u2880 3.5" 2880K Extra Density(1)
89 104 = /dev/fd?u3200 3.5" 3200K Extra Density
90 108 = /dev/fd?u3520 3.5" 3520K Extra Density
91 112 = /dev/fd?u3840 3.5" 3840K Extra Density(1)
92
93 36 = /dev/fd?CompaQ Compaq 2880K drive; obsolete?
94
95 (1) Autodetectable format
96 (2) Autodetectable format in a Double Density (720K) drive only
97 (3) Autodetectable format in a High Density (1440K) drive only
98
99 NOTE: The letter in the device name (d, q, h or u)
100 signifies the type of drive: 5.25" Double Density (d),
101 5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
102 (any model, u). The use of the capital letters D, H
103 and E for the 3.5" models have been deprecated, since
104 the drive type is insignificant for these devices.
105
106 3 char Pseudo-TTY slaves
107 0 = /dev/ttyp0 First PTY slave
108 1 = /dev/ttyp1 Second PTY slave
109 ...
110 255 = /dev/ttyef 256th PTY slave
111
112 These are the old-style (BSD) PTY devices; Unix98
113 devices are on major 136 and above.
114
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
118
119 For partitions, add to the whole disk device number:
120 0 = /dev/hd? Whole disk
121 1 = /dev/hd?1 First partition
122 2 = /dev/hd?2 Second partition
123 ...
124 63 = /dev/hd?63 63rd partition
125
126 For Linux/i386, partitions 1-4 are the primary
127 partitions, and 5 and above are logical partitions.
128 Other versions of Linux use partitioning schemes
129 appropriate to their respective architectures.
130
131 4 char TTY devices
132 0 = /dev/tty0 Current virtual console
133
134 1 = /dev/tty1 First virtual console
135 ...
136 63 = /dev/tty63 63rd virtual console
137 64 = /dev/ttyS0 First UART serial port
138 ...
139 255 = /dev/ttyS191 192nd UART serial port
140
141 UART serial ports refer to 8250/16450/16550 series devices.
142
143 Older versions of the Linux kernel used this major
144 number for BSD PTY devices. As of Linux 2.1.115, this
145 is no longer supported. Use major numbers 2 and 3.
146
147 4 block Aliases for dynamically allocated major devices to be used
148 when its not possible to create the real device nodes
149 because the root filesystem is mounted read-only.
150
151 0 = /dev/root
152
153 5 char Alternate TTY devices
154 0 = /dev/tty Current TTY device
155 1 = /dev/console System console
156 2 = /dev/ptmx PTY master multiplex
157 3 = /dev/ttyprintk User messages via printk TTY device
158 64 = /dev/cua0 Callout device for ttyS0
159 ...
160 255 = /dev/cua191 Callout device for ttyS191
161
162 (5,1) is /dev/console starting with Linux 2.1.71. See
163 the section on terminal devices for more information
164 on /dev/console.
165
166 6 char Parallel printer devices
167 0 = /dev/lp0 Parallel printer on parport0
168 1 = /dev/lp1 Parallel printer on parport1
169 ...
170
171 Current Linux kernels no longer have a fixed mapping
172 between parallel ports and I/O addresses. Instead,
173 they are redirected through the parport multiplex layer.
174
175 7 char Virtual console capture devices
176 0 = /dev/vcs Current vc text contents
177 1 = /dev/vcs1 tty1 text contents
178 ...
179 63 = /dev/vcs63 tty63 text contents
180 128 = /dev/vcsa Current vc text/attribute contents
181 129 = /dev/vcsa1 tty1 text/attribute contents
182 ...
183 191 = /dev/vcsa63 tty63 text/attribute contents
184
185 NOTE: These devices permit both read and write access.
186
187 7 block Loopback devices
188 0 = /dev/loop0 First loop device
189 1 = /dev/loop1 Second loop device
190 ...
191
192 The loop devices are used to mount filesystems not
193 associated with block devices. The binding to the
194 loop devices is handled by mount(8) or losetup(8).
195
196 8 block SCSI disk devices (0-15)
197 0 = /dev/sda First SCSI disk whole disk
198 16 = /dev/sdb Second SCSI disk whole disk
199 32 = /dev/sdc Third SCSI disk whole disk
200 ...
201 240 = /dev/sdp Sixteenth SCSI disk whole disk
202
203 Partitions are handled in the same way as for IDE
204 disks (see major number 3) except that the limit on
205 partitions is 15.
206
207 9 char SCSI tape devices
208 0 = /dev/st0 First SCSI tape, mode 0
209 1 = /dev/st1 Second SCSI tape, mode 0
210 ...
211 32 = /dev/st0l First SCSI tape, mode 1
212 33 = /dev/st1l Second SCSI tape, mode 1
213 ...
214 64 = /dev/st0m First SCSI tape, mode 2
215 65 = /dev/st1m Second SCSI tape, mode 2
216 ...
217 96 = /dev/st0a First SCSI tape, mode 3
218 97 = /dev/st1a Second SCSI tape, mode 3
219 ...
220 128 = /dev/nst0 First SCSI tape, mode 0, no rewind
221 129 = /dev/nst1 Second SCSI tape, mode 0, no rewind
222 ...
223 160 = /dev/nst0l First SCSI tape, mode 1, no rewind
224 161 = /dev/nst1l Second SCSI tape, mode 1, no rewind
225 ...
226 192 = /dev/nst0m First SCSI tape, mode 2, no rewind
227 193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
228 ...
229 224 = /dev/nst0a First SCSI tape, mode 3, no rewind
230 225 = /dev/nst1a Second SCSI tape, mode 3, no rewind
231 ...
232
233 "No rewind" refers to the omission of the default
234 automatic rewind on device close. The MTREW or MTOFFL
235 ioctl()'s can be used to rewind the tape regardless of
236 the device used to access it.
237
238 9 block Metadisk (RAID) devices
239 0 = /dev/md0 First metadisk group
240 1 = /dev/md1 Second metadisk group
241 ...
242
243 The metadisk driver is used to span a
244 filesystem across multiple physical disks.
245
246 10 char Non-serial mice, misc features
247 0 = /dev/logibm Logitech bus mouse
248 1 = /dev/psaux PS/2-style mouse port
249 2 = /dev/inportbm Microsoft Inport bus mouse
250 3 = /dev/atibm ATI XL bus mouse
251 4 = /dev/jbm J-mouse
252 4 = /dev/amigamouse Amiga mouse (68k/Amiga)
253 5 = /dev/atarimouse Atari mouse
254 6 = /dev/sunmouse Sun mouse
255 7 = /dev/amigamouse1 Second Amiga mouse
256 8 = /dev/smouse Simple serial mouse driver
257 9 = /dev/pc110pad IBM PC-110 digitizer pad
258 10 = /dev/adbmouse Apple Desktop Bus mouse
259 11 = /dev/vrtpanel Vr41xx embedded touch panel
260 13 = /dev/vpcmouse Connectix Virtual PC Mouse
261 14 = /dev/touchscreen/ucb1x00 UCB 1x00 touchscreen
262 15 = /dev/touchscreen/mk712 MK712 touchscreen
263 128 = /dev/beep Fancy beep device
264 129 =
265 130 = /dev/watchdog Watchdog timer port
266 131 = /dev/temperature Machine internal temperature
267 132 = /dev/hwtrap Hardware fault trap
268 133 = /dev/exttrp External device trap
269 134 = /dev/apm_bios Advanced Power Management BIOS
270 135 = /dev/rtc Real Time Clock
271 137 = /dev/vhci Bluetooth virtual HCI driver
272 139 = /dev/openprom SPARC OpenBoot PROM
273 140 = /dev/relay8 Berkshire Products Octal relay card
274 141 = /dev/relay16 Berkshire Products ISO-16 relay card
275 142 =
276 143 = /dev/pciconf PCI configuration space
277 144 = /dev/nvram Non-volatile configuration RAM
278 145 = /dev/hfmodem Soundcard shortwave modem control
279 146 = /dev/graphics Linux/SGI graphics device
280 147 = /dev/opengl Linux/SGI OpenGL pipe
281 148 = /dev/gfx Linux/SGI graphics effects device
282 149 = /dev/input/mouse Linux/SGI Irix emulation mouse
283 150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
284 151 = /dev/led Front panel LEDs
285 152 = /dev/kpoll Kernel Poll Driver
286 153 = /dev/mergemem Memory merge device
287 154 = /dev/pmu Macintosh PowerBook power manager
288 155 = /dev/isictl MultiTech ISICom serial control
289 156 = /dev/lcd Front panel LCD display
290 157 = /dev/ac Applicom Intl Profibus card
291 158 = /dev/nwbutton Netwinder external button
292 159 = /dev/nwdebug Netwinder debug interface
293 160 = /dev/nwflash Netwinder flash memory
294 161 = /dev/userdma User-space DMA access
295 162 = /dev/smbus System Management Bus
296 163 = /dev/lik Logitech Internet Keyboard
297 164 = /dev/ipmo Intel Intelligent Platform Management
298 165 = /dev/vmmon VMware virtual machine monitor
299 166 = /dev/i2o/ctl I2O configuration manager
300 167 = /dev/specialix_sxctl Specialix serial control
301 168 = /dev/tcldrv Technology Concepts serial control
302 169 = /dev/specialix_rioctl Specialix RIO serial control
303 170 = /dev/thinkpad/thinkpad IBM Thinkpad devices
304 171 = /dev/srripc QNX4 API IPC manager
305 172 = /dev/usemaclone Semaphore clone device
306 173 = /dev/ipmikcs Intelligent Platform Management
307 174 = /dev/uctrl SPARCbook 3 microcontroller
308 175 = /dev/agpgart AGP Graphics Address Remapping Table
309 176 = /dev/gtrsc Gorgy Timing radio clock
310 177 = /dev/cbm Serial CBM bus
311 178 = /dev/jsflash JavaStation OS flash SIMM
312 179 = /dev/xsvc High-speed shared-mem/semaphore service
313 180 = /dev/vrbuttons Vr41xx button input device
314 181 = /dev/toshiba Toshiba laptop SMM support
315 182 = /dev/perfctr Performance-monitoring counters
316 183 = /dev/hwrng Generic random number generator
317 184 = /dev/cpu/microcode CPU microcode update interface
318 186 = /dev/atomicps Atomic shapshot of process state data
319 187 = /dev/irnet IrNET device
320 188 = /dev/smbusbios SMBus BIOS
321 189 = /dev/ussp_ctl User space serial port control
322 190 = /dev/crash Mission Critical Linux crash dump facility
323 191 = /dev/pcl181 <information missing>
324 192 = /dev/nas_xbus NAS xbus LCD/buttons access
325 193 = /dev/d7s SPARC 7-segment display
326 194 = /dev/zkshim Zero-Knowledge network shim control
327 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
328 196 = /dev/vfio/vfio VFIO userspace driver interface
329 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
330 198 = /dev/sexec Signed executable interface
331 199 = /dev/scanners/cuecat :CueCat barcode scanner
332 200 = /dev/net/tun TAP/TUN network device
333 201 = /dev/button/gulpb Transmeta GULP-B buttons
334 202 = /dev/emd/ctl Enhanced Metadisk RAID (EMD) control
335 203 = /dev/cuse Cuse (character device in user-space)
336 204 = /dev/video/em8300 EM8300 DVD decoder control
337 205 = /dev/video/em8300_mv EM8300 DVD decoder video
338 206 = /dev/video/em8300_ma EM8300 DVD decoder audio
339 207 = /dev/video/em8300_sp EM8300 DVD decoder subpicture
340 208 = /dev/compaq/cpqphpc Compaq PCI Hot Plug Controller
341 209 = /dev/compaq/cpqrid Compaq Remote Insight Driver
342 210 = /dev/impi/bt IMPI coprocessor block transfer
343 211 = /dev/impi/smic IMPI coprocessor stream interface
344 212 = /dev/watchdogs/0 First watchdog device
345 213 = /dev/watchdogs/1 Second watchdog device
346 214 = /dev/watchdogs/2 Third watchdog device
347 215 = /dev/watchdogs/3 Fourth watchdog device
348 216 = /dev/fujitsu/apanel Fujitsu/Siemens application panel
349 217 = /dev/ni/natmotn National Instruments Motion
350 218 = /dev/kchuid Inter-process chuid control
351 219 = /dev/modems/mwave MWave modem firmware upload
352 220 = /dev/mptctl Message passing technology (MPT) control
353 221 = /dev/mvista/hssdsi Montavista PICMG hot swap system driver
354 222 = /dev/mvista/hasi Montavista PICMG high availability
355 223 = /dev/input/uinput User level driver support for input
356 224 = /dev/tpm TCPA TPM driver
357 225 = /dev/pps Pulse Per Second driver
358 226 = /dev/systrace Systrace device
359 227 = /dev/mcelog X86_64 Machine Check Exception driver
360 228 = /dev/hpet HPET driver
361 229 = /dev/fuse Fuse (virtual filesystem in user-space)
362 230 = /dev/midishare MidiShare driver
363 231 = /dev/snapshot System memory snapshot device
364 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
365 233 = /dev/kmview View-OS A process with a view
366 234 = /dev/btrfs-control Btrfs control device
367 235 = /dev/autofs Autofs control device
368 236 = /dev/mapper/control Device-Mapper control device
369 237 = /dev/loop-control Loopback control device
370 238 = /dev/vhost-net Host kernel accelerator for virtio net
371 239 = /dev/uhid User-space I/O driver support for HID subsystem
372
373 240-254 Reserved for local use
374 255 Reserved for MISC_DYNAMIC_MINOR
375
376 11 char Raw keyboard device (Linux/SPARC only)
377 0 = /dev/kbd Raw keyboard device
378
379 11 char Serial Mux device (Linux/PA-RISC only)
380 0 = /dev/ttyB0 First mux port
381 1 = /dev/ttyB1 Second mux port
382 ...
383
384 11 block SCSI CD-ROM devices
385 0 = /dev/scd0 First SCSI CD-ROM
386 1 = /dev/scd1 Second SCSI CD-ROM
387 ...
388
389 The prefix /dev/sr (instead of /dev/scd) has been deprecated.
390
391 12 char QIC-02 tape
392 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
393 3 = /dev/tpqic11 QIC-11, rewind-on-close
394 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
395 5 = /dev/tpqic24 QIC-24, rewind-on-close
396 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
397 7 = /dev/tpqic120 QIC-120, rewind-on-close
398 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
399 9 = /dev/tpqic150 QIC-150, rewind-on-close
400
401 The device names specified are proposed -- if there
402 are "standard" names for these devices, please let me know.
403
404 12 block
405
406 13 char Input core
407 0 = /dev/input/js0 First joystick
408 1 = /dev/input/js1 Second joystick
409 ...
410 32 = /dev/input/mouse0 First mouse
411 33 = /dev/input/mouse1 Second mouse
412 ...
413 63 = /dev/input/mice Unified mouse
414 64 = /dev/input/event0 First event queue
415 65 = /dev/input/event1 Second event queue
416 ...
417
418 Each device type has 5 bits (32 minors).
419
420 13 block Previously used for the XT disk (/dev/xdN)
421 Deleted in kernel v3.9.
422
423 14 char Open Sound System (OSS)
424 0 = /dev/mixer Mixer control
425 1 = /dev/sequencer Audio sequencer
426 2 = /dev/midi00 First MIDI port
427 3 = /dev/dsp Digital audio
428 4 = /dev/audio Sun-compatible digital audio
429 6 =
430 7 = /dev/audioctl SPARC audio control device
431 8 = /dev/sequencer2 Sequencer -- alternate device
432 16 = /dev/mixer1 Second soundcard mixer control
433 17 = /dev/patmgr0 Sequencer patch manager
434 18 = /dev/midi01 Second MIDI port
435 19 = /dev/dsp1 Second soundcard digital audio
436 20 = /dev/audio1 Second soundcard Sun digital audio
437 33 = /dev/patmgr1 Sequencer patch manager
438 34 = /dev/midi02 Third MIDI port
439 50 = /dev/midi03 Fourth MIDI port
440
441 14 block
442
443 15 char Joystick
444 0 = /dev/js0 First analog joystick
445 1 = /dev/js1 Second analog joystick
446 ...
447 128 = /dev/djs0 First digital joystick
448 129 = /dev/djs1 Second digital joystick
449 ...
450 15 block Sony CDU-31A/CDU-33A CD-ROM
451 0 = /dev/sonycd Sony CDU-31a CD-ROM
452
453 16 char Non-SCSI scanners
454 0 = /dev/gs4500 Genius 4500 handheld scanner
455
456 16 block GoldStar CD-ROM
457 0 = /dev/gscd GoldStar CD-ROM
458
459 17 char OBSOLETE (was Chase serial card)
460 0 = /dev/ttyH0 First Chase port
461 1 = /dev/ttyH1 Second Chase port
462 ...
463 17 block Optics Storage CD-ROM
464 0 = /dev/optcd Optics Storage CD-ROM
465
466 18 char OBSOLETE (was Chase serial card - alternate devices)
467 0 = /dev/cuh0 Callout device for ttyH0
468 1 = /dev/cuh1 Callout device for ttyH1
469 ...
470 18 block Sanyo CD-ROM
471 0 = /dev/sjcd Sanyo CD-ROM
472
473 19 char Cyclades serial card
474 0 = /dev/ttyC0 First Cyclades port
475 ...
476 31 = /dev/ttyC31 32nd Cyclades port
477
478 19 block "Double" compressed disk
479 0 = /dev/double0 First compressed disk
480 ...
481 7 = /dev/double7 Eighth compressed disk
482 128 = /dev/cdouble0 Mirror of first compressed disk
483 ...
484 135 = /dev/cdouble7 Mirror of eighth compressed disk
485
486 See the Double documentation for the meaning of the
487 mirror devices.
488
489 20 char Cyclades serial card - alternate devices
490 0 = /dev/cub0 Callout device for ttyC0
491 ...
492 31 = /dev/cub31 Callout device for ttyC31
493
494 20 block Hitachi CD-ROM (under development)
495 0 = /dev/hitcd Hitachi CD-ROM
496
497 21 char Generic SCSI access
498 0 = /dev/sg0 First generic SCSI device
499 1 = /dev/sg1 Second generic SCSI device
500 ...
501
502 Most distributions name these /dev/sga, /dev/sgb...;
503 this sets an unnecessary limit of 26 SCSI devices in
504 the system and is counter to standard Linux
505 device-naming practice.
506
507 21 block Acorn MFM hard drive interface
508 0 = /dev/mfma First MFM drive whole disk
509 64 = /dev/mfmb Second MFM drive whole disk
510
511 This device is used on the ARM-based Acorn RiscPC.
512 Partitions are handled the same way as for IDE disks
513 (see major number 3).
514
515 22 char Digiboard serial card
516 0 = /dev/ttyD0 First Digiboard port
517 1 = /dev/ttyD1 Second Digiboard port
518 ...
519 22 block Second IDE hard disk/CD-ROM interface
520 0 = /dev/hdc Master: whole disk (or CD-ROM)
521 64 = /dev/hdd Slave: whole disk (or CD-ROM)
522
523 Partitions are handled the same way as for the first
524 interface (see major number 3).
525
526 23 char Digiboard serial card - alternate devices
527 0 = /dev/cud0 Callout device for ttyD0
528 1 = /dev/cud1 Callout device for ttyD1
529 ...
530 23 block Mitsumi proprietary CD-ROM
531 0 = /dev/mcd Mitsumi CD-ROM
532
533 24 char Stallion serial card
534 0 = /dev/ttyE0 Stallion port 0 card 0
535 1 = /dev/ttyE1 Stallion port 1 card 0
536 ...
537 64 = /dev/ttyE64 Stallion port 0 card 1
538 65 = /dev/ttyE65 Stallion port 1 card 1
539 ...
540 128 = /dev/ttyE128 Stallion port 0 card 2
541 129 = /dev/ttyE129 Stallion port 1 card 2
542 ...
543 192 = /dev/ttyE192 Stallion port 0 card 3
544 193 = /dev/ttyE193 Stallion port 1 card 3
545 ...
546 24 block Sony CDU-535 CD-ROM
547 0 = /dev/cdu535 Sony CDU-535 CD-ROM
548
549 25 char Stallion serial card - alternate devices
550 0 = /dev/cue0 Callout device for ttyE0
551 1 = /dev/cue1 Callout device for ttyE1
552 ...
553 64 = /dev/cue64 Callout device for ttyE64
554 65 = /dev/cue65 Callout device for ttyE65
555 ...
556 128 = /dev/cue128 Callout device for ttyE128
557 129 = /dev/cue129 Callout device for ttyE129
558 ...
559 192 = /dev/cue192 Callout device for ttyE192
560 193 = /dev/cue193 Callout device for ttyE193
561 ...
562 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
563 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
564 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
565 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
566 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
567
568 26 char
569
570 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
571 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
572 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
573 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
574 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
575
576 27 char QIC-117 tape
577 0 = /dev/qft0 Unit 0, rewind-on-close
578 1 = /dev/qft1 Unit 1, rewind-on-close
579 2 = /dev/qft2 Unit 2, rewind-on-close
580 3 = /dev/qft3 Unit 3, rewind-on-close
581 4 = /dev/nqft0 Unit 0, no rewind-on-close
582 5 = /dev/nqft1 Unit 1, no rewind-on-close
583 6 = /dev/nqft2 Unit 2, no rewind-on-close
584 7 = /dev/nqft3 Unit 3, no rewind-on-close
585 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
586 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
587 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
588 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
589 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
590 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
591 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
592 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
593 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
594 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
595 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
596 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
597 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
598 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
599 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
600 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
601
602 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
603 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
604 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
605 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
606 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
607
608 28 char Stallion serial card - card programming
609 0 = /dev/staliomem0 First Stallion card I/O memory
610 1 = /dev/staliomem1 Second Stallion card I/O memory
611 2 = /dev/staliomem2 Third Stallion card I/O memory
612 3 = /dev/staliomem3 Fourth Stallion card I/O memory
613
614 28 char Atari SLM ACSI laser printer (68k/Atari)
615 0 = /dev/slm0 First SLM laser printer
616 1 = /dev/slm1 Second SLM laser printer
617 ...
618 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
619 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
620 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
621 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
622 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
623
624 28 block ACSI disk (68k/Atari)
625 0 = /dev/ada First ACSI disk whole disk
626 16 = /dev/adb Second ACSI disk whole disk
627 32 = /dev/adc Third ACSI disk whole disk
628 ...
629 240 = /dev/adp 16th ACSI disk whole disk
630
631 Partitions are handled in the same way as for IDE
632 disks (see major number 3) except that the limit on
633 partitions is 15, like SCSI.
634
635 29 char Universal frame buffer
636 0 = /dev/fb0 First frame buffer
637 1 = /dev/fb1 Second frame buffer
638 ...
639 31 = /dev/fb31 32nd frame buffer
640
641 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
642 0 = /dev/aztcd Aztech CD-ROM
643
644 30 char iBCS-2 compatibility devices
645 0 = /dev/socksys Socket access
646 1 = /dev/spx SVR3 local X interface
647 32 = /dev/inet/ip Network access
648 33 = /dev/inet/icmp
649 34 = /dev/inet/ggp
650 35 = /dev/inet/ipip
651 36 = /dev/inet/tcp
652 37 = /dev/inet/egp
653 38 = /dev/inet/pup
654 39 = /dev/inet/udp
655 40 = /dev/inet/idp
656 41 = /dev/inet/rawip
657
658 Additionally, iBCS-2 requires the following links:
659
660 /dev/ip -> /dev/inet/ip
661 /dev/icmp -> /dev/inet/icmp
662 /dev/ggp -> /dev/inet/ggp
663 /dev/ipip -> /dev/inet/ipip
664 /dev/tcp -> /dev/inet/tcp
665 /dev/egp -> /dev/inet/egp
666 /dev/pup -> /dev/inet/pup
667 /dev/udp -> /dev/inet/udp
668 /dev/idp -> /dev/inet/idp
669 /dev/rawip -> /dev/inet/rawip
670 /dev/inet/arp -> /dev/inet/udp
671 /dev/inet/rip -> /dev/inet/udp
672 /dev/nfsd -> /dev/socksys
673 /dev/X0R -> /dev/null (? apparently not required ?)
674
675 30 block Philips LMS CM-205 CD-ROM
676 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
677
678 /dev/lmscd is an older name for this device. This
679 driver does not work with the CM-205MS CD-ROM.
680
681 31 char MPU-401 MIDI
682 0 = /dev/mpu401data MPU-401 data port
683 1 = /dev/mpu401stat MPU-401 status port
684
685 31 block ROM/flash memory card
686 0 = /dev/rom0 First ROM card (rw)
687 ...
688 7 = /dev/rom7 Eighth ROM card (rw)
689 8 = /dev/rrom0 First ROM card (ro)
690 ...
691 15 = /dev/rrom7 Eighth ROM card (ro)
692 16 = /dev/flash0 First flash memory card (rw)
693 ...
694 23 = /dev/flash7 Eighth flash memory card (rw)
695 24 = /dev/rflash0 First flash memory card (ro)
696 ...
697 31 = /dev/rflash7 Eighth flash memory card (ro)
698
699 The read-write (rw) devices support back-caching
700 written data in RAM, as well as writing to flash RAM
701 devices. The read-only devices (ro) support reading
702 only.
703
704 32 char Specialix serial card
705 0 = /dev/ttyX0 First Specialix port
706 1 = /dev/ttyX1 Second Specialix port
707 ...
708 32 block Philips LMS CM-206 CD-ROM
709 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
710
711 33 char Specialix serial card - alternate devices
712 0 = /dev/cux0 Callout device for ttyX0
713 1 = /dev/cux1 Callout device for ttyX1
714 ...
715 33 block Third IDE hard disk/CD-ROM interface
716 0 = /dev/hde Master: whole disk (or CD-ROM)
717 64 = /dev/hdf Slave: whole disk (or CD-ROM)
718
719 Partitions are handled the same way as for the first
720 interface (see major number 3).
721
722 34 char Z8530 HDLC driver
723 0 = /dev/scc0 First Z8530, first port
724 1 = /dev/scc1 First Z8530, second port
725 2 = /dev/scc2 Second Z8530, first port
726 3 = /dev/scc3 Second Z8530, second port
727 ...
728
729 In a previous version these devices were named
730 /dev/sc1 for /dev/scc0, /dev/sc2 for /dev/scc1, and so
731 on.
732
733 34 block Fourth IDE hard disk/CD-ROM interface
734 0 = /dev/hdg Master: whole disk (or CD-ROM)
735 64 = /dev/hdh Slave: whole disk (or CD-ROM)
736
737 Partitions are handled the same way as for the first
738 interface (see major number 3).
739
740 35 char tclmidi MIDI driver
741 0 = /dev/midi0 First MIDI port, kernel timed
742 1 = /dev/midi1 Second MIDI port, kernel timed
743 2 = /dev/midi2 Third MIDI port, kernel timed
744 3 = /dev/midi3 Fourth MIDI port, kernel timed
745 64 = /dev/rmidi0 First MIDI port, untimed
746 65 = /dev/rmidi1 Second MIDI port, untimed
747 66 = /dev/rmidi2 Third MIDI port, untimed
748 67 = /dev/rmidi3 Fourth MIDI port, untimed
749 128 = /dev/smpte0 First MIDI port, SMPTE timed
750 129 = /dev/smpte1 Second MIDI port, SMPTE timed
751 130 = /dev/smpte2 Third MIDI port, SMPTE timed
752 131 = /dev/smpte3 Fourth MIDI port, SMPTE timed
753
754 35 block Slow memory ramdisk
755 0 = /dev/slram Slow memory ramdisk
756
757 36 char Netlink support
758 0 = /dev/route Routing, device updates, kernel to user
759 1 = /dev/skip enSKIP security cache control
760 3 = /dev/fwmonitor Firewall packet copies
761 16 = /dev/tap0 First Ethertap device
762 ...
763 31 = /dev/tap15 16th Ethertap device
764
765 36 block OBSOLETE (was MCA ESDI hard disk)
766
767 37 char IDE tape
768 0 = /dev/ht0 First IDE tape
769 1 = /dev/ht1 Second IDE tape
770 ...
771 128 = /dev/nht0 First IDE tape, no rewind-on-close
772 129 = /dev/nht1 Second IDE tape, no rewind-on-close
773 ...
774
775 Currently, only one IDE tape drive is supported.
776
777 37 block Zorro II ramdisk
778 0 = /dev/z2ram Zorro II ramdisk
779
780 38 char Myricom PCI Myrinet board
781 0 = /dev/mlanai0 First Myrinet board
782 1 = /dev/mlanai1 Second Myrinet board
783 ...
784
785 This device is used for status query, board control
786 and "user level packet I/O." This board is also
787 accessible as a standard networking "eth" device.
788
789 38 block OBSOLETE (was Linux/AP+)
790
791 39 char ML-16P experimental I/O board
792 0 = /dev/ml16pa-a0 First card, first analog channel
793 1 = /dev/ml16pa-a1 First card, second analog channel
794 ...
795 15 = /dev/ml16pa-a15 First card, 16th analog channel
796 16 = /dev/ml16pa-d First card, digital lines
797 17 = /dev/ml16pa-c0 First card, first counter/timer
798 18 = /dev/ml16pa-c1 First card, second counter/timer
799 19 = /dev/ml16pa-c2 First card, third counter/timer
800 32 = /dev/ml16pb-a0 Second card, first analog channel
801 33 = /dev/ml16pb-a1 Second card, second analog channel
802 ...
803 47 = /dev/ml16pb-a15 Second card, 16th analog channel
804 48 = /dev/ml16pb-d Second card, digital lines
805 49 = /dev/ml16pb-c0 Second card, first counter/timer
806 50 = /dev/ml16pb-c1 Second card, second counter/timer
807 51 = /dev/ml16pb-c2 Second card, third counter/timer
808 ...
809 39 block
810
811 40 char
812
813 40 block
814
815 41 char Yet Another Micro Monitor
816 0 = /dev/yamm Yet Another Micro Monitor
817
818 41 block
819
820 42 char Demo/sample use
821
822 42 block Demo/sample use
823
824 This number is intended for use in sample code, as
825 well as a general "example" device number. It
826 should never be used for a device driver that is being
827 distributed; either obtain an official number or use
828 the local/experimental range. The sudden addition or
829 removal of a driver with this number should not cause
830 ill effects to the system (bugs excepted.)
831
832 IN PARTICULAR, ANY DISTRIBUTION WHICH CONTAINS A
833 DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
834
835 43 char isdn4linux virtual modem
836 0 = /dev/ttyI0 First virtual modem
837 ...
838 63 = /dev/ttyI63 64th virtual modem
839
840 43 block Network block devices
841 0 = /dev/nb0 First network block device
842 1 = /dev/nb1 Second network block device
843 ...
844
845 Network Block Device is somehow similar to loopback
846 devices: If you read from it, it sends packet across
847 network asking server for data. If you write to it, it
848 sends packet telling server to write. It could be used
849 to mounting filesystems over the net, swapping over
850 the net, implementing block device in userland etc.
851
852 44 char isdn4linux virtual modem - alternate devices
853 0 = /dev/cui0 Callout device for ttyI0
854 ...
855 63 = /dev/cui63 Callout device for ttyI63
856
857 44 block Flash Translation Layer (FTL) filesystems
858 0 = /dev/ftla FTL on first Memory Technology Device
859 16 = /dev/ftlb FTL on second Memory Technology Device
860 32 = /dev/ftlc FTL on third Memory Technology Device
861 ...
862 240 = /dev/ftlp FTL on 16th Memory Technology Device
863
864 Partitions are handled in the same way as for IDE
865 disks (see major number 3) except that the partition
866 limit is 15 rather than 63 per disk (same as SCSI.)
867
868 45 char isdn4linux ISDN BRI driver
869 0 = /dev/isdn0 First virtual B channel raw data
870 ...
871 63 = /dev/isdn63 64th virtual B channel raw data
872 64 = /dev/isdnctrl0 First channel control/debug
873 ...
874 127 = /dev/isdnctrl63 64th channel control/debug
875
876 128 = /dev/ippp0 First SyncPPP device
877 ...
878 191 = /dev/ippp63 64th SyncPPP device
879
880 255 = /dev/isdninfo ISDN monitor interface
881
882 45 block Parallel port IDE disk devices
883 0 = /dev/pda First parallel port IDE disk
884 16 = /dev/pdb Second parallel port IDE disk
885 32 = /dev/pdc Third parallel port IDE disk
886 48 = /dev/pdd Fourth parallel port IDE disk
887
888 Partitions are handled in the same way as for IDE
889 disks (see major number 3) except that the partition
890 limit is 15 rather than 63 per disk.
891
892 46 char Comtrol Rocketport serial card
893 0 = /dev/ttyR0 First Rocketport port
894 1 = /dev/ttyR1 Second Rocketport port
895 ...
896 46 block Parallel port ATAPI CD-ROM devices
897 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
898 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
899 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
900 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
901
902 47 char Comtrol Rocketport serial card - alternate devices
903 0 = /dev/cur0 Callout device for ttyR0
904 1 = /dev/cur1 Callout device for ttyR1
905 ...
906 47 block Parallel port ATAPI disk devices
907 0 = /dev/pf0 First parallel port ATAPI disk
908 1 = /dev/pf1 Second parallel port ATAPI disk
909 2 = /dev/pf2 Third parallel port ATAPI disk
910 3 = /dev/pf3 Fourth parallel port ATAPI disk
911
912 This driver is intended for floppy disks and similar
913 devices and hence does not support partitioning.
914
915 48 char SDL RISCom serial card
916 0 = /dev/ttyL0 First RISCom port
917 1 = /dev/ttyL1 Second RISCom port
918 ...
919 48 block Mylex DAC960 PCI RAID controller; first controller
920 0 = /dev/rd/c0d0 First disk, whole disk
921 8 = /dev/rd/c0d1 Second disk, whole disk
922 ...
923 248 = /dev/rd/c0d31 32nd disk, whole disk
924
925 For partitions add:
926 0 = /dev/rd/c?d? Whole disk
927 1 = /dev/rd/c?d?p1 First partition
928 ...
929 7 = /dev/rd/c?d?p7 Seventh partition
930
931 49 char SDL RISCom serial card - alternate devices
932 0 = /dev/cul0 Callout device for ttyL0
933 1 = /dev/cul1 Callout device for ttyL1
934 ...
935 49 block Mylex DAC960 PCI RAID controller; second controller
936 0 = /dev/rd/c1d0 First disk, whole disk
937 8 = /dev/rd/c1d1 Second disk, whole disk
938 ...
939 248 = /dev/rd/c1d31 32nd disk, whole disk
940
941 Partitions are handled as for major 48.
942
943 50 char Reserved for GLINT
944
945 50 block Mylex DAC960 PCI RAID controller; third controller
946 0 = /dev/rd/c2d0 First disk, whole disk
947 8 = /dev/rd/c2d1 Second disk, whole disk
948 ...
949 248 = /dev/rd/c2d31 32nd disk, whole disk
950
951 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
952 0 = /dev/bc0 First Baycom radio modem
953 1 = /dev/bc1 Second Baycom radio modem
954 ...
955 51 block Mylex DAC960 PCI RAID controller; fourth controller
956 0 = /dev/rd/c3d0 First disk, whole disk
957 8 = /dev/rd/c3d1 Second disk, whole disk
958 ...
959 248 = /dev/rd/c3d31 32nd disk, whole disk
960
961 Partitions are handled as for major 48.
962
963 52 char Spellcaster DataComm/BRI ISDN card
964 0 = /dev/dcbri0 First DataComm card
965 1 = /dev/dcbri1 Second DataComm card
966 2 = /dev/dcbri2 Third DataComm card
967 3 = /dev/dcbri3 Fourth DataComm card
968
969 52 block Mylex DAC960 PCI RAID controller; fifth controller
970 0 = /dev/rd/c4d0 First disk, whole disk
971 8 = /dev/rd/c4d1 Second disk, whole disk
972 ...
973 248 = /dev/rd/c4d31 32nd disk, whole disk
974
975 Partitions are handled as for major 48.
976
977 53 char BDM interface for remote debugging MC683xx microcontrollers
978 0 = /dev/pd_bdm0 PD BDM interface on lp0
979 1 = /dev/pd_bdm1 PD BDM interface on lp1
980 2 = /dev/pd_bdm2 PD BDM interface on lp2
981 4 = /dev/icd_bdm0 ICD BDM interface on lp0
982 5 = /dev/icd_bdm1 ICD BDM interface on lp1
983 6 = /dev/icd_bdm2 ICD BDM interface on lp2
984
985 This device is used for the interfacing to the MC683xx
986 microcontrollers via Background Debug Mode by use of a
987 Parallel Port interface. PD is the Motorola Public
988 Domain Interface and ICD is the commercial interface
989 by P&E.
990
991 53 block Mylex DAC960 PCI RAID controller; sixth controller
992 0 = /dev/rd/c5d0 First disk, whole disk
993 8 = /dev/rd/c5d1 Second disk, whole disk
994 ...
995 248 = /dev/rd/c5d31 32nd disk, whole disk
996
997 Partitions are handled as for major 48.
998
999 54 char Electrocardiognosis Holter serial card
1000 0 = /dev/holter0 First Holter port
1001 1 = /dev/holter1 Second Holter port
1002 2 = /dev/holter2 Third Holter port
1003
1004 A custom serial card used by Electrocardiognosis SRL
1005 <mseritan@ottonel.pub.ro> to transfer data from Holter
1006 24-hour heart monitoring equipment.
1007
1008 54 block Mylex DAC960 PCI RAID controller; seventh controller
1009 0 = /dev/rd/c6d0 First disk, whole disk
1010 8 = /dev/rd/c6d1 Second disk, whole disk
1011 ...
1012 248 = /dev/rd/c6d31 32nd disk, whole disk
1013
1014 Partitions are handled as for major 48.
1015
1016 55 char DSP56001 digital signal processor
1017 0 = /dev/dsp56k First DSP56001
1018
1019 55 block Mylex DAC960 PCI RAID controller; eighth controller
1020 0 = /dev/rd/c7d0 First disk, whole disk
1021 8 = /dev/rd/c7d1 Second disk, whole disk
1022 ...
1023 248 = /dev/rd/c7d31 32nd disk, whole disk
1024
1025 Partitions are handled as for major 48.
1026
1027 56 char Apple Desktop Bus
1028 0 = /dev/adb ADB bus control
1029
1030 Additional devices will be added to this number, all
1031 starting with /dev/adb.
1032
1033 56 block Fifth IDE hard disk/CD-ROM interface
1034 0 = /dev/hdi Master: whole disk (or CD-ROM)
1035 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1036
1037 Partitions are handled the same way as for the first
1038 interface (see major number 3).
1039
1040 57 char Hayes ESP serial card
1041 0 = /dev/ttyP0 First ESP port
1042 1 = /dev/ttyP1 Second ESP port
1043 ...
1044
1045 57 block Sixth IDE hard disk/CD-ROM interface
1046 0 = /dev/hdk Master: whole disk (or CD-ROM)
1047 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1048
1049 Partitions are handled the same way as for the first
1050 interface (see major number 3).
1051
1052 58 char Hayes ESP serial card - alternate devices
1053 0 = /dev/cup0 Callout device for ttyP0
1054 1 = /dev/cup1 Callout device for ttyP1
1055 ...
1056
1057 58 block Reserved for logical volume manager
1058
1059 59 char sf firewall package
1060 0 = /dev/firewall Communication with sf kernel module
1061
1062 59 block Generic PDA filesystem device
1063 0 = /dev/pda0 First PDA device
1064 1 = /dev/pda1 Second PDA device
1065 ...
1066
1067 The pda devices are used to mount filesystems on
1068 remote pda's (basically slow handheld machines with
1069 proprietary OS's and limited memory and storage
1070 running small fs translation drivers) through serial /
1071 IRDA / parallel links.
1072
1073 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1074
1075 60-63 char LOCAL/EXPERIMENTAL USE
1076
1077 60-63 block LOCAL/EXPERIMENTAL USE
1078 Allocated for local/experimental use. For devices not
1079 assigned official numbers, these ranges should be
1080 used in order to avoid conflicting with future assignments.
1081
1082 64 char ENskip kernel encryption package
1083 0 = /dev/enskip Communication with ENskip kernel module
1084
1085 64 block Scramdisk/DriveCrypt encrypted devices
1086 0 = /dev/scramdisk/master Master node for ioctls
1087 1 = /dev/scramdisk/1 First encrypted device
1088 2 = /dev/scramdisk/2 Second encrypted device
1089 ...
1090 255 = /dev/scramdisk/255 255th encrypted device
1091
1092 The filename of the encrypted container and the passwords
1093 are sent via ioctls (using the sdmount tool) to the master
1094 node which then activates them via one of the
1095 /dev/scramdisk/x nodes for loop mounting (all handled
1096 through the sdmount tool).
1097
1098 Requested by: andy@scramdisklinux.org
1099
1100 65 char Sundance "plink" Transputer boards (obsolete, unused)
1101 0 = /dev/plink0 First plink device
1102 1 = /dev/plink1 Second plink device
1103 2 = /dev/plink2 Third plink device
1104 3 = /dev/plink3 Fourth plink device
1105 64 = /dev/rplink0 First plink device, raw
1106 65 = /dev/rplink1 Second plink device, raw
1107 66 = /dev/rplink2 Third plink device, raw
1108 67 = /dev/rplink3 Fourth plink device, raw
1109 128 = /dev/plink0d First plink device, debug
1110 129 = /dev/plink1d Second plink device, debug
1111 130 = /dev/plink2d Third plink device, debug
1112 131 = /dev/plink3d Fourth plink device, debug
1113 192 = /dev/rplink0d First plink device, raw, debug
1114 193 = /dev/rplink1d Second plink device, raw, debug
1115 194 = /dev/rplink2d Third plink device, raw, debug
1116 195 = /dev/rplink3d Fourth plink device, raw, debug
1117
1118 This is a commercial driver; contact James Howes
1119 <jth@prosig.demon.co.uk> for information.
1120
1121 65 block SCSI disk devices (16-31)
1122 0 = /dev/sdq 17th SCSI disk whole disk
1123 16 = /dev/sdr 18th SCSI disk whole disk
1124 32 = /dev/sds 19th SCSI disk whole disk
1125 ...
1126 240 = /dev/sdaf 32nd SCSI disk whole disk
1127
1128 Partitions are handled in the same way as for IDE
1129 disks (see major number 3) except that the limit on
1130 partitions is 15.
1131
1132 66 char YARC PowerPC PCI coprocessor card
1133 0 = /dev/yppcpci0 First YARC card
1134 1 = /dev/yppcpci1 Second YARC card
1135 ...
1136
1137 66 block SCSI disk devices (32-47)
1138 0 = /dev/sdag 33th SCSI disk whole disk
1139 16 = /dev/sdah 34th SCSI disk whole disk
1140 32 = /dev/sdai 35th SCSI disk whole disk
1141 ...
1142 240 = /dev/sdav 48nd SCSI disk whole disk
1143
1144 Partitions are handled in the same way as for IDE
1145 disks (see major number 3) except that the limit on
1146 partitions is 15.
1147
1148 67 char Coda network file system
1149 0 = /dev/cfs0 Coda cache manager
1150
1151 See http://www.coda.cs.cmu.edu for information about Coda.
1152
1153 67 block SCSI disk devices (48-63)
1154 0 = /dev/sdaw 49th SCSI disk whole disk
1155 16 = /dev/sdax 50th SCSI disk whole disk
1156 32 = /dev/sday 51st SCSI disk whole disk
1157 ...
1158 240 = /dev/sdbl 64th SCSI disk whole disk
1159
1160 Partitions are handled in the same way as for IDE
1161 disks (see major number 3) except that the limit on
1162 partitions is 15.
1163
1164 68 char CAPI 2.0 interface
1165 0 = /dev/capi20 Control device
1166 1 = /dev/capi20.00 First CAPI 2.0 application
1167 2 = /dev/capi20.01 Second CAPI 2.0 application
1168 ...
1169 20 = /dev/capi20.19 19th CAPI 2.0 application
1170
1171 ISDN CAPI 2.0 driver for use with CAPI 2.0
1172 applications; currently supports the AVM B1 card.
1173
1174 68 block SCSI disk devices (64-79)
1175 0 = /dev/sdbm 65th SCSI disk whole disk
1176 16 = /dev/sdbn 66th SCSI disk whole disk
1177 32 = /dev/sdbo 67th SCSI disk whole disk
1178 ...
1179 240 = /dev/sdcb 80th SCSI disk whole disk
1180
1181 Partitions are handled in the same way as for IDE
1182 disks (see major number 3) except that the limit on
1183 partitions is 15.
1184
1185 69 char MA16 numeric accelerator card
1186 0 = /dev/ma16 Board memory access
1187
1188 69 block SCSI disk devices (80-95)
1189 0 = /dev/sdcc 81st SCSI disk whole disk
1190 16 = /dev/sdcd 82nd SCSI disk whole disk
1191 32 = /dev/sdce 83th SCSI disk whole disk
1192 ...
1193 240 = /dev/sdcr 96th SCSI disk whole disk
1194
1195 Partitions are handled in the same way as for IDE
1196 disks (see major number 3) except that the limit on
1197 partitions is 15.
1198
1199 70 char SpellCaster Protocol Services Interface
1200 0 = /dev/apscfg Configuration interface
1201 1 = /dev/apsauth Authentication interface
1202 2 = /dev/apslog Logging interface
1203 3 = /dev/apsdbg Debugging interface
1204 64 = /dev/apsisdn ISDN command interface
1205 65 = /dev/apsasync Async command interface
1206 128 = /dev/apsmon Monitor interface
1207
1208 70 block SCSI disk devices (96-111)
1209 0 = /dev/sdcs 97th SCSI disk whole disk
1210 16 = /dev/sdct 98th SCSI disk whole disk
1211 32 = /dev/sdcu 99th SCSI disk whole disk
1212 ...
1213 240 = /dev/sddh 112nd SCSI disk whole disk
1214
1215 Partitions are handled in the same way as for IDE
1216 disks (see major number 3) except that the limit on
1217 partitions is 15.
1218
1219 71 char Computone IntelliPort II serial card
1220 0 = /dev/ttyF0 IntelliPort II board 0, port 0
1221 1 = /dev/ttyF1 IntelliPort II board 0, port 1
1222 ...
1223 63 = /dev/ttyF63 IntelliPort II board 0, port 63
1224 64 = /dev/ttyF64 IntelliPort II board 1, port 0
1225 65 = /dev/ttyF65 IntelliPort II board 1, port 1
1226 ...
1227 127 = /dev/ttyF127 IntelliPort II board 1, port 63
1228 128 = /dev/ttyF128 IntelliPort II board 2, port 0
1229 129 = /dev/ttyF129 IntelliPort II board 2, port 1
1230 ...
1231 191 = /dev/ttyF191 IntelliPort II board 2, port 63
1232 192 = /dev/ttyF192 IntelliPort II board 3, port 0
1233 193 = /dev/ttyF193 IntelliPort II board 3, port 1
1234 ...
1235 255 = /dev/ttyF255 IntelliPort II board 3, port 63
1236
1237 71 block SCSI disk devices (112-127)
1238 0 = /dev/sddi 113th SCSI disk whole disk
1239 16 = /dev/sddj 114th SCSI disk whole disk
1240 32 = /dev/sddk 115th SCSI disk whole disk
1241 ...
1242 240 = /dev/sddx 128th SCSI disk whole disk
1243
1244 Partitions are handled in the same way as for IDE
1245 disks (see major number 3) except that the limit on
1246 partitions is 15.
1247
1248 72 char Computone IntelliPort II serial card - alternate devices
1249 0 = /dev/cuf0 Callout device for ttyF0
1250 1 = /dev/cuf1 Callout device for ttyF1
1251 ...
1252 63 = /dev/cuf63 Callout device for ttyF63
1253 64 = /dev/cuf64 Callout device for ttyF64
1254 65 = /dev/cuf65 Callout device for ttyF65
1255 ...
1256 127 = /dev/cuf127 Callout device for ttyF127
1257 128 = /dev/cuf128 Callout device for ttyF128
1258 129 = /dev/cuf129 Callout device for ttyF129
1259 ...
1260 191 = /dev/cuf191 Callout device for ttyF191
1261 192 = /dev/cuf192 Callout device for ttyF192
1262 193 = /dev/cuf193 Callout device for ttyF193
1263 ...
1264 255 = /dev/cuf255 Callout device for ttyF255
1265
1266 72 block Compaq Intelligent Drive Array, first controller
1267 0 = /dev/ida/c0d0 First logical drive whole disk
1268 16 = /dev/ida/c0d1 Second logical drive whole disk
1269 ...
1270 240 = /dev/ida/c0d15 16th logical drive whole disk
1271
1272 Partitions are handled the same way as for Mylex
1273 DAC960 (see major number 48) except that the limit on
1274 partitions is 15.
1275
1276 73 char Computone IntelliPort II serial card - control devices
1277 0 = /dev/ip2ipl0 Loadware device for board 0
1278 1 = /dev/ip2stat0 Status device for board 0
1279 4 = /dev/ip2ipl1 Loadware device for board 1
1280 5 = /dev/ip2stat1 Status device for board 1
1281 8 = /dev/ip2ipl2 Loadware device for board 2
1282 9 = /dev/ip2stat2 Status device for board 2
1283 12 = /dev/ip2ipl3 Loadware device for board 3
1284 13 = /dev/ip2stat3 Status device for board 3
1285
1286 73 block Compaq Intelligent Drive Array, second controller
1287 0 = /dev/ida/c1d0 First logical drive whole disk
1288 16 = /dev/ida/c1d1 Second logical drive whole disk
1289 ...
1290 240 = /dev/ida/c1d15 16th logical drive whole disk
1291
1292 Partitions are handled the same way as for Mylex
1293 DAC960 (see major number 48) except that the limit on
1294 partitions is 15.
1295
1296 74 char SCI bridge
1297 0 = /dev/SCI/0 SCI device 0
1298 1 = /dev/SCI/1 SCI device 1
1299 ...
1300
1301 Currently for Dolphin Interconnect Solutions' PCI-SCI
1302 bridge.
1303
1304 74 block Compaq Intelligent Drive Array, third controller
1305 0 = /dev/ida/c2d0 First logical drive whole disk
1306 16 = /dev/ida/c2d1 Second logical drive whole disk
1307 ...
1308 240 = /dev/ida/c2d15 16th logical drive whole disk
1309
1310 Partitions are handled the same way as for Mylex
1311 DAC960 (see major number 48) except that the limit on
1312 partitions is 15.
1313
1314 75 char Specialix IO8+ serial card
1315 0 = /dev/ttyW0 First IO8+ port, first card
1316 1 = /dev/ttyW1 Second IO8+ port, first card
1317 ...
1318 8 = /dev/ttyW8 First IO8+ port, second card
1319 ...
1320
1321 75 block Compaq Intelligent Drive Array, fourth controller
1322 0 = /dev/ida/c3d0 First logical drive whole disk
1323 16 = /dev/ida/c3d1 Second logical drive whole disk
1324 ...
1325 240 = /dev/ida/c3d15 16th logical drive whole disk
1326
1327 Partitions are handled the same way as for Mylex
1328 DAC960 (see major number 48) except that the limit on
1329 partitions is 15.
1330
1331 76 char Specialix IO8+ serial card - alternate devices
1332 0 = /dev/cuw0 Callout device for ttyW0
1333 1 = /dev/cuw1 Callout device for ttyW1
1334 ...
1335 8 = /dev/cuw8 Callout device for ttyW8
1336 ...
1337
1338 76 block Compaq Intelligent Drive Array, fifth controller
1339 0 = /dev/ida/c4d0 First logical drive whole disk
1340 16 = /dev/ida/c4d1 Second logical drive whole disk
1341 ...
1342 240 = /dev/ida/c4d15 16th logical drive whole disk
1343
1344 Partitions are handled the same way as for Mylex
1345 DAC960 (see major number 48) except that the limit on
1346 partitions is 15.
1347
1348
1349 77 char ComScire Quantum Noise Generator
1350 0 = /dev/qng ComScire Quantum Noise Generator
1351
1352 77 block Compaq Intelligent Drive Array, sixth controller
1353 0 = /dev/ida/c5d0 First logical drive whole disk
1354 16 = /dev/ida/c5d1 Second logical drive whole disk
1355 ...
1356 240 = /dev/ida/c5d15 16th logical drive whole disk
1357
1358 Partitions are handled the same way as for Mylex
1359 DAC960 (see major number 48) except that the limit on
1360 partitions is 15.
1361
1362 78 char PAM Software's multimodem boards
1363 0 = /dev/ttyM0 First PAM modem
1364 1 = /dev/ttyM1 Second PAM modem
1365 ...
1366
1367 78 block Compaq Intelligent Drive Array, seventh controller
1368 0 = /dev/ida/c6d0 First logical drive whole disk
1369 16 = /dev/ida/c6d1 Second logical drive whole disk
1370 ...
1371 240 = /dev/ida/c6d15 16th logical drive whole disk
1372
1373 Partitions are handled the same way as for Mylex
1374 DAC960 (see major number 48) except that the limit on
1375 partitions is 15.
1376
1377 79 char PAM Software's multimodem boards - alternate devices
1378 0 = /dev/cum0 Callout device for ttyM0
1379 1 = /dev/cum1 Callout device for ttyM1
1380 ...
1381
1382 79 block Compaq Intelligent Drive Array, eighth controller
1383 0 = /dev/ida/c7d0 First logical drive whole disk
1384 16 = /dev/ida/c7d1 Second logical drive whole disk
1385 ...
1386 240 = /dev/ida/c715 16th logical drive whole disk
1387
1388 Partitions are handled the same way as for Mylex
1389 DAC960 (see major number 48) except that the limit on
1390 partitions is 15.
1391
1392 80 char Photometrics AT200 CCD camera
1393 0 = /dev/at200 Photometrics AT200 CCD camera
1394
1395 80 block I2O hard disk
1396 0 = /dev/i2o/hda First I2O hard disk, whole disk
1397 16 = /dev/i2o/hdb Second I2O hard disk, whole disk
1398 ...
1399 240 = /dev/i2o/hdp 16th I2O hard disk, whole disk
1400
1401 Partitions are handled in the same way as for IDE
1402 disks (see major number 3) except that the limit on
1403 partitions is 15.
1404
1405 81 char video4linux
1406 0 = /dev/video0 Video capture/overlay device
1407 ...
1408 63 = /dev/video63 Video capture/overlay device
1409 64 = /dev/radio0 Radio device
1410 ...
1411 127 = /dev/radio63 Radio device
1412 128 = /dev/swradio0 Software Defined Radio device
1413 ...
1414 191 = /dev/swradio63 Software Defined Radio device
1415 224 = /dev/vbi0 Vertical blank interrupt
1416 ...
1417 255 = /dev/vbi31 Vertical blank interrupt
1418
1419 Minor numbers are allocated dynamically unless
1420 CONFIG_VIDEO_FIXED_MINOR_RANGES (default n)
1421 configuration option is set.
1422
1423 81 block I2O hard disk
1424 0 = /dev/i2o/hdq 17th I2O hard disk, whole disk
1425 16 = /dev/i2o/hdr 18th I2O hard disk, whole disk
1426 ...
1427 240 = /dev/i2o/hdaf 32nd I2O hard disk, whole disk
1428
1429 Partitions are handled in the same way as for IDE
1430 disks (see major number 3) except that the limit on
1431 partitions is 15.
1432
1433 82 char WiNRADiO communications receiver card
1434 0 = /dev/winradio0 First WiNRADiO card
1435 1 = /dev/winradio1 Second WiNRADiO card
1436 ...
1437
1438 The driver and documentation may be obtained from
1439 http://www.winradio.com/
1440
1441 82 block I2O hard disk
1442 0 = /dev/i2o/hdag 33rd I2O hard disk, whole disk
1443 16 = /dev/i2o/hdah 34th I2O hard disk, whole disk
1444 ...
1445 240 = /dev/i2o/hdav 48th I2O hard disk, whole disk
1446
1447 Partitions are handled in the same way as for IDE
1448 disks (see major number 3) except that the limit on
1449 partitions is 15.
1450
1451 83 char Matrox mga_vid video driver
1452 0 = /dev/mga_vid0 1st video card
1453 1 = /dev/mga_vid1 2nd video card
1454 2 = /dev/mga_vid2 3rd video card
1455 ...
1456 15 = /dev/mga_vid15 16th video card
1457
1458 83 block I2O hard disk
1459 0 = /dev/i2o/hdaw 49th I2O hard disk, whole disk
1460 16 = /dev/i2o/hdax 50th I2O hard disk, whole disk
1461 ...
1462 240 = /dev/i2o/hdbl 64th I2O hard disk, whole disk
1463
1464 Partitions are handled in the same way as for IDE
1465 disks (see major number 3) except that the limit on
1466 partitions is 15.
1467
1468 84 char Ikon 1011[57] Versatec Greensheet Interface
1469 0 = /dev/ihcp0 First Greensheet port
1470 1 = /dev/ihcp1 Second Greensheet port
1471
1472 84 block I2O hard disk
1473 0 = /dev/i2o/hdbm 65th I2O hard disk, whole disk
1474 16 = /dev/i2o/hdbn 66th I2O hard disk, whole disk
1475 ...
1476 240 = /dev/i2o/hdcb 80th I2O hard disk, whole disk
1477
1478 Partitions are handled in the same way as for IDE
1479 disks (see major number 3) except that the limit on
1480 partitions is 15.
1481
1482 85 char Linux/SGI shared memory input queue
1483 0 = /dev/shmiq Master shared input queue
1484 1 = /dev/qcntl0 First device pushed
1485 2 = /dev/qcntl1 Second device pushed
1486 ...
1487
1488 85 block I2O hard disk
1489 0 = /dev/i2o/hdcc 81st I2O hard disk, whole disk
1490 16 = /dev/i2o/hdcd 82nd I2O hard disk, whole disk
1491 ...
1492 240 = /dev/i2o/hdcr 96th I2O hard disk, whole disk
1493
1494 Partitions are handled in the same way as for IDE
1495 disks (see major number 3) except that the limit on
1496 partitions is 15.
1497
1498 86 char SCSI media changer
1499 0 = /dev/sch0 First SCSI media changer
1500 1 = /dev/sch1 Second SCSI media changer
1501 ...
1502
1503 86 block I2O hard disk
1504 0 = /dev/i2o/hdcs 97th I2O hard disk, whole disk
1505 16 = /dev/i2o/hdct 98th I2O hard disk, whole disk
1506 ...
1507 240 = /dev/i2o/hddh 112th I2O hard disk, whole disk
1508
1509 Partitions are handled in the same way as for IDE
1510 disks (see major number 3) except that the limit on
1511 partitions is 15.
1512
1513 87 char Sony Control-A1 stereo control bus
1514 0 = /dev/controla0 First device on chain
1515 1 = /dev/controla1 Second device on chain
1516 ...
1517
1518 87 block I2O hard disk
1519 0 = /dev/i2o/hddi 113rd I2O hard disk, whole disk
1520 16 = /dev/i2o/hddj 114th I2O hard disk, whole disk
1521 ...
1522 240 = /dev/i2o/hddx 128th I2O hard disk, whole disk
1523
1524 Partitions are handled in the same way as for IDE
1525 disks (see major number 3) except that the limit on
1526 partitions is 15.
1527
1528 88 char COMX synchronous serial card
1529 0 = /dev/comx0 COMX channel 0
1530 1 = /dev/comx1 COMX channel 1
1531 ...
1532
1533 88 block Seventh IDE hard disk/CD-ROM interface
1534 0 = /dev/hdm Master: whole disk (or CD-ROM)
1535 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1536
1537 Partitions are handled the same way as for the first
1538 interface (see major number 3).
1539
1540 89 char I2C bus interface
1541 0 = /dev/i2c-0 First I2C adapter
1542 1 = /dev/i2c-1 Second I2C adapter
1543 ...
1544
1545 89 block Eighth IDE hard disk/CD-ROM interface
1546 0 = /dev/hdo Master: whole disk (or CD-ROM)
1547 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1548
1549 Partitions are handled the same way as for the first
1550 interface (see major number 3).
1551
1552 90 char Memory Technology Device (RAM, ROM, Flash)
1553 0 = /dev/mtd0 First MTD (rw)
1554 1 = /dev/mtdr0 First MTD (ro)
1555 ...
1556 30 = /dev/mtd15 16th MTD (rw)
1557 31 = /dev/mtdr15 16th MTD (ro)
1558
1559 90 block Ninth IDE hard disk/CD-ROM interface
1560 0 = /dev/hdq Master: whole disk (or CD-ROM)
1561 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1562
1563 Partitions are handled the same way as for the first
1564 interface (see major number 3).
1565
1566 91 char CAN-Bus devices
1567 0 = /dev/can0 First CAN-Bus controller
1568 1 = /dev/can1 Second CAN-Bus controller
1569 ...
1570
1571 91 block Tenth IDE hard disk/CD-ROM interface
1572 0 = /dev/hds Master: whole disk (or CD-ROM)
1573 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1574
1575 Partitions are handled the same way as for the first
1576 interface (see major number 3).
1577
1578 92 char Reserved for ith Kommunikationstechnik MIC ISDN card
1579
1580 92 block PPDD encrypted disk driver
1581 0 = /dev/ppdd0 First encrypted disk
1582 1 = /dev/ppdd1 Second encrypted disk
1583 ...
1584
1585 Partitions are handled in the same way as for IDE
1586 disks (see major number 3) except that the limit on
1587 partitions is 15.
1588
1589 93 char
1590
1591 93 block NAND Flash Translation Layer filesystem
1592 0 = /dev/nftla First NFTL layer
1593 16 = /dev/nftlb Second NFTL layer
1594 ...
1595 240 = /dev/nftlp 16th NTFL layer
1596
1597 94 char
1598
1599 94 block IBM S/390 DASD block storage
1600 0 = /dev/dasda First DASD device, major
1601 1 = /dev/dasda1 First DASD device, block 1
1602 2 = /dev/dasda2 First DASD device, block 2
1603 3 = /dev/dasda3 First DASD device, block 3
1604 4 = /dev/dasdb Second DASD device, major
1605 5 = /dev/dasdb1 Second DASD device, block 1
1606 6 = /dev/dasdb2 Second DASD device, block 2
1607 7 = /dev/dasdb3 Second DASD device, block 3
1608 ...
1609
1610 95 char IP filter
1611 0 = /dev/ipl Filter control device/log file
1612 1 = /dev/ipnat NAT control device/log file
1613 2 = /dev/ipstate State information log file
1614 3 = /dev/ipauth Authentication control device/log file
1615 ...
1616
1617 96 char Parallel port ATAPI tape devices
1618 0 = /dev/pt0 First parallel port ATAPI tape
1619 1 = /dev/pt1 Second parallel port ATAPI tape
1620 ...
1621 128 = /dev/npt0 First p.p. ATAPI tape, no rewind
1622 129 = /dev/npt1 Second p.p. ATAPI tape, no rewind
1623 ...
1624
1625 96 block Inverse NAND Flash Translation Layer
1626 0 = /dev/inftla First INFTL layer
1627 16 = /dev/inftlb Second INFTL layer
1628 ...
1629 240 = /dev/inftlp 16th INTFL layer
1630
1631 97 char Parallel port generic ATAPI interface
1632 0 = /dev/pg0 First parallel port ATAPI device
1633 1 = /dev/pg1 Second parallel port ATAPI device
1634 2 = /dev/pg2 Third parallel port ATAPI device
1635 3 = /dev/pg3 Fourth parallel port ATAPI device
1636
1637 These devices support the same API as the generic SCSI
1638 devices.
1639
1640 98 char Control and Measurement Device (comedi)
1641 0 = /dev/comedi0 First comedi device
1642 1 = /dev/comedi1 Second comedi device
1643 ...
1644
1645 See http://stm.lbl.gov/comedi.
1646
1647 98 block User-mode virtual block device
1648 0 = /dev/ubda First user-mode block device
1649 16 = /dev/udbb Second user-mode block device
1650 ...
1651
1652 Partitions are handled in the same way as for IDE
1653 disks (see major number 3) except that the limit on
1654 partitions is 15.
1655
1656 This device is used by the user-mode virtual kernel port.
1657
1658 99 char Raw parallel ports
1659 0 = /dev/parport0 First parallel port
1660 1 = /dev/parport1 Second parallel port
1661 ...
1662
1663 99 block JavaStation flash disk
1664 0 = /dev/jsfd JavaStation flash disk
1665
1666 100 char Telephony for Linux
1667 0 = /dev/phone0 First telephony device
1668 1 = /dev/phone1 Second telephony device
1669 ...
1670
1671 101 char Motorola DSP 56xxx board
1672 0 = /dev/mdspstat Status information
1673 1 = /dev/mdsp1 First DSP board I/O controls
1674 ...
1675 16 = /dev/mdsp16 16th DSP board I/O controls
1676
1677 101 block AMI HyperDisk RAID controller
1678 0 = /dev/amiraid/ar0 First array whole disk
1679 16 = /dev/amiraid/ar1 Second array whole disk
1680 ...
1681 240 = /dev/amiraid/ar15 16th array whole disk
1682
1683 For each device, partitions are added as:
1684 0 = /dev/amiraid/ar? Whole disk
1685 1 = /dev/amiraid/ar?p1 First partition
1686 2 = /dev/amiraid/ar?p2 Second partition
1687 ...
1688 15 = /dev/amiraid/ar?p15 15th partition
1689
1690 102 char
1691
1692 102 block Compressed block device
1693 0 = /dev/cbd/a First compressed block device, whole device
1694 16 = /dev/cbd/b Second compressed block device, whole device
1695 ...
1696 240 = /dev/cbd/p 16th compressed block device, whole device
1697
1698 Partitions are handled in the same way as for IDE
1699 disks (see major number 3) except that the limit on
1700 partitions is 15.
1701
1702 103 char Arla network file system
1703 0 = /dev/nnpfs0 First NNPFS device
1704 1 = /dev/nnpfs1 Second NNPFS device
1705
1706 Arla is a free clone of the Andrew File System, AFS.
1707 The NNPFS device gives user mode filesystem
1708 implementations a kernel presence for caching and easy
1709 mounting. For more information about the project,
1710 write to <arla-drinkers@stacken.kth.se> or see
1711 http://www.stacken.kth.se/project/arla/
1712
1713 103 block Audit device
1714 0 = /dev/audit Audit device
1715
1716 104 char Flash BIOS support
1717
1718 104 block Compaq Next Generation Drive Array, first controller
1719 0 = /dev/cciss/c0d0 First logical drive, whole disk
1720 16 = /dev/cciss/c0d1 Second logical drive, whole disk
1721 ...
1722 240 = /dev/cciss/c0d15 16th logical drive, whole disk
1723
1724 Partitions are handled the same way as for Mylex
1725 DAC960 (see major number 48) except that the limit on
1726 partitions is 15.
1727
1728 105 char Comtrol VS-1000 serial controller
1729 0 = /dev/ttyV0 First VS-1000 port
1730 1 = /dev/ttyV1 Second VS-1000 port
1731 ...
1732
1733 105 block Compaq Next Generation Drive Array, second controller
1734 0 = /dev/cciss/c1d0 First logical drive, whole disk
1735 16 = /dev/cciss/c1d1 Second logical drive, whole disk
1736 ...
1737 240 = /dev/cciss/c1d15 16th logical drive, whole disk
1738
1739 Partitions are handled the same way as for Mylex
1740 DAC960 (see major number 48) except that the limit on
1741 partitions is 15.
1742
1743 106 char Comtrol VS-1000 serial controller - alternate devices
1744 0 = /dev/cuv0 First VS-1000 port
1745 1 = /dev/cuv1 Second VS-1000 port
1746 ...
1747
1748 106 block Compaq Next Generation Drive Array, third controller
1749 0 = /dev/cciss/c2d0 First logical drive, whole disk
1750 16 = /dev/cciss/c2d1 Second logical drive, whole disk
1751 ...
1752 240 = /dev/cciss/c2d15 16th logical drive, whole disk
1753
1754 Partitions are handled the same way as for Mylex
1755 DAC960 (see major number 48) except that the limit on
1756 partitions is 15.
1757
1758 107 char 3Dfx Voodoo Graphics device
1759 0 = /dev/3dfx Primary 3Dfx graphics device
1760
1761 107 block Compaq Next Generation Drive Array, fourth controller
1762 0 = /dev/cciss/c3d0 First logical drive, whole disk
1763 16 = /dev/cciss/c3d1 Second logical drive, whole disk
1764 ...
1765 240 = /dev/cciss/c3d15 16th logical drive, whole disk
1766
1767 Partitions are handled the same way as for Mylex
1768 DAC960 (see major number 48) except that the limit on
1769 partitions is 15.
1770
1771 108 char Device independent PPP interface
1772 0 = /dev/ppp Device independent PPP interface
1773
1774 108 block Compaq Next Generation Drive Array, fifth controller
1775 0 = /dev/cciss/c4d0 First logical drive, whole disk
1776 16 = /dev/cciss/c4d1 Second logical drive, whole disk
1777 ...
1778 240 = /dev/cciss/c4d15 16th logical drive, whole disk
1779
1780 Partitions are handled the same way as for Mylex
1781 DAC960 (see major number 48) except that the limit on
1782 partitions is 15.
1783
1784 109 char Reserved for logical volume manager
1785
1786 109 block Compaq Next Generation Drive Array, sixth controller
1787 0 = /dev/cciss/c5d0 First logical drive, whole disk
1788 16 = /dev/cciss/c5d1 Second logical drive, whole disk
1789 ...
1790 240 = /dev/cciss/c5d15 16th logical drive, whole disk
1791
1792 Partitions are handled the same way as for Mylex
1793 DAC960 (see major number 48) except that the limit on
1794 partitions is 15.
1795
1796 110 char miroMEDIA Surround board
1797 0 = /dev/srnd0 First miroMEDIA Surround board
1798 1 = /dev/srnd1 Second miroMEDIA Surround board
1799 ...
1800
1801 110 block Compaq Next Generation Drive Array, seventh controller
1802 0 = /dev/cciss/c6d0 First logical drive, whole disk
1803 16 = /dev/cciss/c6d1 Second logical drive, whole disk
1804 ...
1805 240 = /dev/cciss/c6d15 16th logical drive, whole disk
1806
1807 Partitions are handled the same way as for Mylex
1808 DAC960 (see major number 48) except that the limit on
1809 partitions is 15.
1810
1811 111 char
1812
1813 111 block Compaq Next Generation Drive Array, eighth controller
1814 0 = /dev/cciss/c7d0 First logical drive, whole disk
1815 16 = /dev/cciss/c7d1 Second logical drive, whole disk
1816 ...
1817 240 = /dev/cciss/c7d15 16th logical drive, whole disk
1818
1819 Partitions are handled the same way as for Mylex
1820 DAC960 (see major number 48) except that the limit on
1821 partitions is 15.
1822
1823 112 char ISI serial card
1824 0 = /dev/ttyM0 First ISI port
1825 1 = /dev/ttyM1 Second ISI port
1826 ...
1827
1828 There is currently a device-naming conflict between
1829 these and PAM multimodems (major 78).
1830
1831 112 block IBM iSeries virtual disk
1832 0 = /dev/iseries/vda First virtual disk, whole disk
1833 8 = /dev/iseries/vdb Second virtual disk, whole disk
1834 ...
1835 200 = /dev/iseries/vdz 26th virtual disk, whole disk
1836 208 = /dev/iseries/vdaa 27th virtual disk, whole disk
1837 ...
1838 248 = /dev/iseries/vdaf 32nd virtual disk, whole disk
1839
1840 Partitions are handled in the same way as for IDE
1841 disks (see major number 3) except that the limit on
1842 partitions is 7.
1843
1844 113 char ISI serial card - alternate devices
1845 0 = /dev/cum0 Callout device for ttyM0
1846 1 = /dev/cum1 Callout device for ttyM1
1847 ...
1848
1849 113 block IBM iSeries virtual CD-ROM
1850 0 = /dev/iseries/vcda First virtual CD-ROM
1851 1 = /dev/iseries/vcdb Second virtual CD-ROM
1852 ...
1853
1854 114 char Picture Elements ISE board
1855 0 = /dev/ise0 First ISE board
1856 1 = /dev/ise1 Second ISE board
1857 ...
1858 128 = /dev/isex0 Control node for first ISE board
1859 129 = /dev/isex1 Control node for second ISE board
1860 ...
1861
1862 The ISE board is an embedded computer, optimized for
1863 image processing. The /dev/iseN nodes are the general
1864 I/O access to the board, the /dev/isex0 nodes command
1865 nodes used to control the board.
1866
1867 114 block IDE BIOS powered software RAID interfaces such as the
1868 Promise Fastrak
1869
1870 0 = /dev/ataraid/d0
1871 1 = /dev/ataraid/d0p1
1872 2 = /dev/ataraid/d0p2
1873 ...
1874 16 = /dev/ataraid/d1
1875 17 = /dev/ataraid/d1p1
1876 18 = /dev/ataraid/d1p2
1877 ...
1878 255 = /dev/ataraid/d15p15
1879
1880 Partitions are handled in the same way as for IDE
1881 disks (see major number 3) except that the limit on
1882 partitions is 15.
1883
1884 115 char TI link cable devices (115 was formerly the console driver speaker)
1885 0 = /dev/tipar0 Parallel cable on first parallel port
1886 ...
1887 7 = /dev/tipar7 Parallel cable on seventh parallel port
1888
1889 8 = /dev/tiser0 Serial cable on first serial port
1890 ...
1891 15 = /dev/tiser7 Serial cable on seventh serial port
1892
1893 16 = /dev/tiusb0 First USB cable
1894 ...
1895 47 = /dev/tiusb31 32nd USB cable
1896
1897 115 block NetWare (NWFS) Devices (0-255)
1898
1899 The NWFS (NetWare) devices are used to present a
1900 collection of NetWare Mirror Groups or NetWare
1901 Partitions as a logical storage segment for
1902 use in mounting NetWare volumes. A maximum of
1903 256 NetWare volumes can be supported in a single
1904 machine.
1905
1906 http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
1907
1908 0 = /dev/nwfs/v0 First NetWare (NWFS) Logical Volume
1909 1 = /dev/nwfs/v1 Second NetWare (NWFS) Logical Volume
1910 2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
1911 ...
1912 255 = /dev/nwfs/v255 Last NetWare (NWFS) Logical Volume
1913
1914 116 char Advanced Linux Sound Driver (ALSA)
1915
1916 116 block MicroMemory battery backed RAM adapter (NVRAM)
1917 Supports 16 boards, 15 partitions each.
1918 Requested by neilb at cse.unsw.edu.au.
1919
1920 0 = /dev/umem/d0 Whole of first board
1921 1 = /dev/umem/d0p1 First partition of first board
1922 2 = /dev/umem/d0p2 Second partition of first board
1923 15 = /dev/umem/d0p15 15th partition of first board
1924
1925 16 = /dev/umem/d1 Whole of second board
1926 17 = /dev/umem/d1p1 First partition of second board
1927 ...
1928 255= /dev/umem/d15p15 15th partition of 16th board.
1929
1930 117 char COSA/SRP synchronous serial card
1931 0 = /dev/cosa0c0 1st board, 1st channel
1932 1 = /dev/cosa0c1 1st board, 2nd channel
1933 ...
1934 16 = /dev/cosa1c0 2nd board, 1st channel
1935 17 = /dev/cosa1c1 2nd board, 2nd channel
1936 ...
1937
1938 117 block Enterprise Volume Management System (EVMS)
1939
1940 The EVMS driver uses a layered, plug-in model to provide
1941 unparalleled flexibility and extensibility in managing
1942 storage. This allows for easy expansion or customization
1943 of various levels of volume management. Requested by
1944 Mark Peloquin (peloquin at us.ibm.com).
1945
1946 Note: EVMS populates and manages all the devnodes in
1947 /dev/evms.
1948
1949 http://sf.net/projects/evms
1950
1951 0 = /dev/evms/block_device EVMS block device
1952 1 = /dev/evms/legacyname1 First EVMS legacy device
1953 2 = /dev/evms/legacyname2 Second EVMS legacy device
1954 ...
1955 Both ranges can grow (down or up) until they meet.
1956 ...
1957 254 = /dev/evms/EVMSname2 Second EVMS native device
1958 255 = /dev/evms/EVMSname1 First EVMS native device
1959
1960 Note: legacyname(s) are derived from the normal legacy
1961 device names. For example, /dev/hda5 would become
1962 /dev/evms/hda5.
1963
1964 118 char IBM Cryptographic Accelerator
1965 0 = /dev/ica Virtual interface to all IBM Crypto Accelerators
1966 1 = /dev/ica0 IBMCA Device 0
1967 2 = /dev/ica1 IBMCA Device 1
1968 ...
1969
1970 119 char VMware virtual network control
1971 0 = /dev/vnet0 1st virtual network
1972 1 = /dev/vnet1 2nd virtual network
1973 ...
1974
1975 120-127 char LOCAL/EXPERIMENTAL USE
1976
1977 120-127 block LOCAL/EXPERIMENTAL USE
1978 Allocated for local/experimental use. For devices not
1979 assigned official numbers, these ranges should be
1980 used in order to avoid conflicting with future assignments.
1981
1982 128-135 char Unix98 PTY masters
1983
1984 These devices should not have corresponding device
1985 nodes; instead they should be accessed through the
1986 /dev/ptmx cloning interface.
1987
1988 128 block SCSI disk devices (128-143)
1989 0 = /dev/sddy 129th SCSI disk whole disk
1990 16 = /dev/sddz 130th SCSI disk whole disk
1991 32 = /dev/sdea 131th SCSI disk whole disk
1992 ...
1993 240 = /dev/sden 144th SCSI disk whole disk
1994
1995 Partitions are handled in the same way as for IDE
1996 disks (see major number 3) except that the limit on
1997 partitions is 15.
1998
1999 129 block SCSI disk devices (144-159)
2000 0 = /dev/sdeo 145th SCSI disk whole disk
2001 16 = /dev/sdep 146th SCSI disk whole disk
2002 32 = /dev/sdeq 147th SCSI disk whole disk
2003 ...
2004 240 = /dev/sdfd 160th SCSI disk whole disk
2005
2006 Partitions are handled in the same way as for IDE
2007 disks (see major number 3) except that the limit on
2008 partitions is 15.
2009
2010 130 char (Misc devices)
2011
2012 130 block SCSI disk devices (160-175)
2013 0 = /dev/sdfe 161st SCSI disk whole disk
2014 16 = /dev/sdff 162nd SCSI disk whole disk
2015 32 = /dev/sdfg 163rd SCSI disk whole disk
2016 ...
2017 240 = /dev/sdft 176th SCSI disk whole disk
2018
2019 Partitions are handled in the same way as for IDE
2020 disks (see major number 3) except that the limit on
2021 partitions is 15.
2022
2023 131 block SCSI disk devices (176-191)
2024 0 = /dev/sdfu 177th SCSI disk whole disk
2025 16 = /dev/sdfv 178th SCSI disk whole disk
2026 32 = /dev/sdfw 179th SCSI disk whole disk
2027 ...
2028 240 = /dev/sdgj 192nd SCSI disk whole disk
2029
2030 Partitions are handled in the same way as for IDE
2031 disks (see major number 3) except that the limit on
2032 partitions is 15.
2033
2034 132 block SCSI disk devices (192-207)
2035 0 = /dev/sdgk 193rd SCSI disk whole disk
2036 16 = /dev/sdgl 194th SCSI disk whole disk
2037 32 = /dev/sdgm 195th SCSI disk whole disk
2038 ...
2039 240 = /dev/sdgz 208th SCSI disk whole disk
2040
2041 Partitions are handled in the same way as for IDE
2042 disks (see major number 3) except that the limit on
2043 partitions is 15.
2044
2045 133 block SCSI disk devices (208-223)
2046 0 = /dev/sdha 209th SCSI disk whole disk
2047 16 = /dev/sdhb 210th SCSI disk whole disk
2048 32 = /dev/sdhc 211th SCSI disk whole disk
2049 ...
2050 240 = /dev/sdhp 224th SCSI disk whole disk
2051
2052 Partitions are handled in the same way as for IDE
2053 disks (see major number 3) except that the limit on
2054 partitions is 15.
2055
2056 134 block SCSI disk devices (224-239)
2057 0 = /dev/sdhq 225th SCSI disk whole disk
2058 16 = /dev/sdhr 226th SCSI disk whole disk
2059 32 = /dev/sdhs 227th SCSI disk whole disk
2060 ...
2061 240 = /dev/sdif 240th SCSI disk whole disk
2062
2063 Partitions are handled in the same way as for IDE
2064 disks (see major number 3) except that the limit on
2065 partitions is 15.
2066
2067 135 block SCSI disk devices (240-255)
2068 0 = /dev/sdig 241st SCSI disk whole disk
2069 16 = /dev/sdih 242nd SCSI disk whole disk
2070 32 = /dev/sdih 243rd SCSI disk whole disk
2071 ...
2072 240 = /dev/sdiv 256th SCSI disk whole disk
2073
2074 Partitions are handled in the same way as for IDE
2075 disks (see major number 3) except that the limit on
2076 partitions is 15.
2077
2078 136-143 char Unix98 PTY slaves
2079 0 = /dev/pts/0 First Unix98 pseudo-TTY
2080 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2081 ...
2082
2083 These device nodes are automatically generated with
2084 the proper permissions and modes by mounting the
2085 devpts filesystem onto /dev/pts with the appropriate
2086 mount options (distribution dependent, however, on
2087 *most* distributions the appropriate options are
2088 "mode=0620,gid=<gid of the "tty" group>".)
2089
2090 136 block Mylex DAC960 PCI RAID controller; ninth controller
2091 0 = /dev/rd/c8d0 First disk, whole disk
2092 8 = /dev/rd/c8d1 Second disk, whole disk
2093 ...
2094 248 = /dev/rd/c8d31 32nd disk, whole disk
2095
2096 Partitions are handled as for major 48.
2097
2098 137 block Mylex DAC960 PCI RAID controller; tenth controller
2099 0 = /dev/rd/c9d0 First disk, whole disk
2100 8 = /dev/rd/c9d1 Second disk, whole disk
2101 ...
2102 248 = /dev/rd/c9d31 32nd disk, whole disk
2103
2104 Partitions are handled as for major 48.
2105
2106 138 block Mylex DAC960 PCI RAID controller; eleventh controller
2107 0 = /dev/rd/c10d0 First disk, whole disk
2108 8 = /dev/rd/c10d1 Second disk, whole disk
2109 ...
2110 248 = /dev/rd/c10d31 32nd disk, whole disk
2111
2112 Partitions are handled as for major 48.
2113
2114 139 block Mylex DAC960 PCI RAID controller; twelfth controller
2115 0 = /dev/rd/c11d0 First disk, whole disk
2116 8 = /dev/rd/c11d1 Second disk, whole disk
2117 ...
2118 248 = /dev/rd/c11d31 32nd disk, whole disk
2119
2120 Partitions are handled as for major 48.
2121
2122 140 block Mylex DAC960 PCI RAID controller; thirteenth controller
2123 0 = /dev/rd/c12d0 First disk, whole disk
2124 8 = /dev/rd/c12d1 Second disk, whole disk
2125 ...
2126 248 = /dev/rd/c12d31 32nd disk, whole disk
2127
2128 Partitions are handled as for major 48.
2129
2130 141 block Mylex DAC960 PCI RAID controller; fourteenth controller
2131 0 = /dev/rd/c13d0 First disk, whole disk
2132 8 = /dev/rd/c13d1 Second disk, whole disk
2133 ...
2134 248 = /dev/rd/c13d31 32nd disk, whole disk
2135
2136 Partitions are handled as for major 48.
2137
2138 142 block Mylex DAC960 PCI RAID controller; fifteenth controller
2139 0 = /dev/rd/c14d0 First disk, whole disk
2140 8 = /dev/rd/c14d1 Second disk, whole disk
2141 ...
2142 248 = /dev/rd/c14d31 32nd disk, whole disk
2143
2144 Partitions are handled as for major 48.
2145
2146 143 block Mylex DAC960 PCI RAID controller; sixteenth controller
2147 0 = /dev/rd/c15d0 First disk, whole disk
2148 8 = /dev/rd/c15d1 Second disk, whole disk
2149 ...
2150 248 = /dev/rd/c15d31 32nd disk, whole disk
2151
2152 Partitions are handled as for major 48.
2153
2154 144 char Encapsulated PPP
2155 0 = /dev/pppox0 First PPP over Ethernet
2156 ...
2157 63 = /dev/pppox63 64th PPP over Ethernet
2158
2159 This is primarily used for ADSL.
2160
2161 The SST 5136-DN DeviceNet interface driver has been
2162 relocated to major 183 due to an unfortunate conflict.
2163
2164 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2165 0 = mounted device 256
2166 255 = mounted device 511
2167
2168 145 char SAM9407-based soundcard
2169 0 = /dev/sam0_mixer
2170 1 = /dev/sam0_sequencer
2171 2 = /dev/sam0_midi00
2172 3 = /dev/sam0_dsp
2173 4 = /dev/sam0_audio
2174 6 = /dev/sam0_sndstat
2175 18 = /dev/sam0_midi01
2176 34 = /dev/sam0_midi02
2177 50 = /dev/sam0_midi03
2178 64 = /dev/sam1_mixer
2179 ...
2180 128 = /dev/sam2_mixer
2181 ...
2182 192 = /dev/sam3_mixer
2183 ...
2184
2185 Device functions match OSS, but offer a number of
2186 addons, which are sam9407 specific. OSS can be
2187 operated simultaneously, taking care of the codec.
2188
2189 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2190 0 = mounted device 512
2191 255 = mounted device 767
2192
2193 146 char SYSTRAM SCRAMNet mirrored-memory network
2194 0 = /dev/scramnet0 First SCRAMNet device
2195 1 = /dev/scramnet1 Second SCRAMNet device
2196 ...
2197
2198 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2199 0 = mounted device 768
2200 255 = mounted device 1023
2201
2202 147 char Aureal Semiconductor Vortex Audio device
2203 0 = /dev/aureal0 First Aureal Vortex
2204 1 = /dev/aureal1 Second Aureal Vortex
2205 ...
2206
2207 147 block Distributed Replicated Block Device (DRBD)
2208 0 = /dev/drbd0 First DRBD device
2209 1 = /dev/drbd1 Second DRBD device
2210 ...
2211
2212 148 char Technology Concepts serial card
2213 0 = /dev/ttyT0 First TCL port
2214 1 = /dev/ttyT1 Second TCL port
2215 ...
2216
2217 149 char Technology Concepts serial card - alternate devices
2218 0 = /dev/cut0 Callout device for ttyT0
2219 1 = /dev/cut0 Callout device for ttyT1
2220 ...
2221
2222 150 char Real-Time Linux FIFOs
2223 0 = /dev/rtf0 First RTLinux FIFO
2224 1 = /dev/rtf1 Second RTLinux FIFO
2225 ...
2226
2227 151 char DPT I2O SmartRaid V controller
2228 0 = /dev/dpti0 First DPT I2O adapter
2229 1 = /dev/dpti1 Second DPT I2O adapter
2230 ...
2231
2232 152 char EtherDrive Control Device
2233 0 = /dev/etherd/ctl Connect/Disconnect an EtherDrive
2234 1 = /dev/etherd/err Monitor errors
2235 2 = /dev/etherd/raw Raw AoE packet monitor
2236
2237 152 block EtherDrive Block Devices
2238 0 = /dev/etherd/0 EtherDrive 0
2239 ...
2240 255 = /dev/etherd/255 EtherDrive 255
2241
2242 153 char SPI Bus Interface (sometimes referred to as MicroWire)
2243 0 = /dev/spi0 First SPI device on the bus
2244 1 = /dev/spi1 Second SPI device on the bus
2245 ...
2246 15 = /dev/spi15 Sixteenth SPI device on the bus
2247
2248 153 block Enhanced Metadisk RAID (EMD) storage units
2249 0 = /dev/emd/0 First unit
2250 1 = /dev/emd/0p1 Partition 1 on First unit
2251 2 = /dev/emd/0p2 Partition 2 on First unit
2252 ...
2253 15 = /dev/emd/0p15 Partition 15 on First unit
2254
2255 16 = /dev/emd/1 Second unit
2256 32 = /dev/emd/2 Third unit
2257 ...
2258 240 = /dev/emd/15 Sixteenth unit
2259
2260 Partitions are handled in the same way as for IDE
2261 disks (see major number 3) except that the limit on
2262 partitions is 15.
2263
2264 154 char Specialix RIO serial card
2265 0 = /dev/ttySR0 First RIO port
2266 ...
2267 255 = /dev/ttySR255 256th RIO port
2268
2269 155 char Specialix RIO serial card - alternate devices
2270 0 = /dev/cusr0 Callout device for ttySR0
2271 ...
2272 255 = /dev/cusr255 Callout device for ttySR255
2273
2274 156 char Specialix RIO serial card
2275 0 = /dev/ttySR256 257th RIO port
2276 ...
2277 255 = /dev/ttySR511 512th RIO port
2278
2279 157 char Specialix RIO serial card - alternate devices
2280 0 = /dev/cusr256 Callout device for ttySR256
2281 ...
2282 255 = /dev/cusr511 Callout device for ttySR511
2283
2284 158 char Dialogic GammaLink fax driver
2285 0 = /dev/gfax0 GammaLink channel 0
2286 1 = /dev/gfax1 GammaLink channel 1
2287 ...
2288
2289 159 char RESERVED
2290
2291 159 block RESERVED
2292
2293 160 char General Purpose Instrument Bus (GPIB)
2294 0 = /dev/gpib0 First GPIB bus
2295 1 = /dev/gpib1 Second GPIB bus
2296 ...
2297
2298 160 block Carmel 8-port SATA Disks on First Controller
2299 0 = /dev/carmel/0 SATA disk 0 whole disk
2300 1 = /dev/carmel/0p1 SATA disk 0 partition 1
2301 ...
2302 31 = /dev/carmel/0p31 SATA disk 0 partition 31
2303
2304 32 = /dev/carmel/1 SATA disk 1 whole disk
2305 64 = /dev/carmel/2 SATA disk 2 whole disk
2306 ...
2307 224 = /dev/carmel/7 SATA disk 7 whole disk
2308
2309 Partitions are handled in the same way as for IDE
2310 disks (see major number 3) except that the limit on
2311 partitions is 31.
2312
2313 161 char IrCOMM devices (IrDA serial/parallel emulation)
2314 0 = /dev/ircomm0 First IrCOMM device
2315 1 = /dev/ircomm1 Second IrCOMM device
2316 ...
2317 16 = /dev/irlpt0 First IrLPT device
2318 17 = /dev/irlpt1 Second IrLPT device
2319 ...
2320
2321 161 block Carmel 8-port SATA Disks on Second Controller
2322 0 = /dev/carmel/8 SATA disk 8 whole disk
2323 1 = /dev/carmel/8p1 SATA disk 8 partition 1
2324 ...
2325 31 = /dev/carmel/8p31 SATA disk 8 partition 31
2326
2327 32 = /dev/carmel/9 SATA disk 9 whole disk
2328 64 = /dev/carmel/10 SATA disk 10 whole disk
2329 ...
2330 224 = /dev/carmel/15 SATA disk 15 whole disk
2331
2332 Partitions are handled in the same way as for IDE
2333 disks (see major number 3) except that the limit on
2334 partitions is 31.
2335
2336 162 char Raw block device interface
2337 0 = /dev/rawctl Raw I/O control device
2338 1 = /dev/raw/raw1 First raw I/O device
2339 2 = /dev/raw/raw2 Second raw I/O device
2340 ...
2341 max minor number of raw device is set by kernel config
2342 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
2343
2344 163 char
2345
2346 164 char Chase Research AT/PCI-Fast serial card
2347 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2348 ...
2349 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2350 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2351 ...
2352 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2353 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2354 ...
2355 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2356 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2357 ...
2358 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2359
2360 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2361 0 = /dev/cuch0 Callout device for ttyCH0
2362 ...
2363 63 = /dev/cuch63 Callout device for ttyCH63
2364
2365 166 char ACM USB modems
2366 0 = /dev/ttyACM0 First ACM modem
2367 1 = /dev/ttyACM1 Second ACM modem
2368 ...
2369
2370 167 char ACM USB modems - alternate devices
2371 0 = /dev/cuacm0 Callout device for ttyACM0
2372 1 = /dev/cuacm1 Callout device for ttyACM1
2373 ...
2374
2375 168 char Eracom CSA7000 PCI encryption adaptor
2376 0 = /dev/ecsa0 First CSA7000
2377 1 = /dev/ecsa1 Second CSA7000
2378 ...
2379
2380 169 char Eracom CSA8000 PCI encryption adaptor
2381 0 = /dev/ecsa8-0 First CSA8000
2382 1 = /dev/ecsa8-1 Second CSA8000
2383 ...
2384
2385 170 char AMI MegaRAC remote access controller
2386 0 = /dev/megarac0 First MegaRAC card
2387 1 = /dev/megarac1 Second MegaRAC card
2388 ...
2389
2390 171 char Reserved for IEEE 1394 (Firewire)
2391
2392 172 char Moxa Intellio serial card
2393 0 = /dev/ttyMX0 First Moxa port
2394 1 = /dev/ttyMX1 Second Moxa port
2395 ...
2396 127 = /dev/ttyMX127 128th Moxa port
2397 128 = /dev/moxactl Moxa control port
2398
2399 173 char Moxa Intellio serial card - alternate devices
2400 0 = /dev/cumx0 Callout device for ttyMX0
2401 1 = /dev/cumx1 Callout device for ttyMX1
2402 ...
2403 127 = /dev/cumx127 Callout device for ttyMX127
2404
2405 174 char SmartIO serial card
2406 0 = /dev/ttySI0 First SmartIO port
2407 1 = /dev/ttySI1 Second SmartIO port
2408 ...
2409
2410 175 char SmartIO serial card - alternate devices
2411 0 = /dev/cusi0 Callout device for ttySI0
2412 1 = /dev/cusi1 Callout device for ttySI1
2413 ...
2414
2415 176 char nCipher nFast PCI crypto accelerator
2416 0 = /dev/nfastpci0 First nFast PCI device
2417 1 = /dev/nfastpci1 First nFast PCI device
2418 ...
2419
2420 177 char TI PCILynx memory spaces
2421 0 = /dev/pcilynx/aux0 AUX space of first PCILynx card
2422 ...
2423 15 = /dev/pcilynx/aux15 AUX space of 16th PCILynx card
2424 16 = /dev/pcilynx/rom0 ROM space of first PCILynx card
2425 ...
2426 31 = /dev/pcilynx/rom15 ROM space of 16th PCILynx card
2427 32 = /dev/pcilynx/ram0 RAM space of first PCILynx card
2428 ...
2429 47 = /dev/pcilynx/ram15 RAM space of 16th PCILynx card
2430
2431 178 char Giganet cLAN1xxx virtual interface adapter
2432 0 = /dev/clanvi0 First cLAN adapter
2433 1 = /dev/clanvi1 Second cLAN adapter
2434 ...
2435
2436 179 block MMC block devices
2437 0 = /dev/mmcblk0 First SD/MMC card
2438 1 = /dev/mmcblk0p1 First partition on first MMC card
2439 8 = /dev/mmcblk1 Second SD/MMC card
2440 ...
2441
2442 The start of next SD/MMC card can be configured with
2443 CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
2444 time using the mmcblk.perdev_minors option. That would
2445 bump the offset between each card to be the configured
2446 value instead of the default 8.
2447
2448 179 char CCube DVXChip-based PCI products
2449 0 = /dev/dvxirq0 First DVX device
2450 1 = /dev/dvxirq1 Second DVX device
2451 ...
2452
2453 180 char USB devices
2454 0 = /dev/usb/lp0 First USB printer
2455 ...
2456 15 = /dev/usb/lp15 16th USB printer
2457 48 = /dev/usb/scanner0 First USB scanner
2458 ...
2459 63 = /dev/usb/scanner15 16th USB scanner
2460 64 = /dev/usb/rio500 Diamond Rio 500
2461 65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
2462 66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
2463 96 = /dev/usb/hiddev0 1st USB HID device
2464 ...
2465 111 = /dev/usb/hiddev15 16th USB HID device
2466 112 = /dev/usb/auer0 1st auerswald ISDN device
2467 ...
2468 127 = /dev/usb/auer15 16th auerswald ISDN device
2469 128 = /dev/usb/brlvgr0 First Braille Voyager device
2470 ...
2471 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
2472 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
2473 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
2474 ...
2475 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
2476 144 = /dev/usb/lcd USB LCD device
2477 160 = /dev/usb/legousbtower0 1st USB Legotower device
2478 ...
2479 175 = /dev/usb/legousbtower15 16th USB Legotower device
2480 176 = /dev/usb/usbtmc1 First USB TMC device
2481 ...
2482 191 = /dev/usb/usbtmc16 16th USB TMC device
2483 192 = /dev/usb/yurex1 First USB Yurex device
2484 ...
2485 209 = /dev/usb/yurex16 16th USB Yurex device
2486
2487 180 block USB block devices
2488 0 = /dev/uba First USB block device
2489 8 = /dev/ubb Second USB block device
2490 16 = /dev/ubc Third USB block device
2491 ...
2492
2493 181 char Conrad Electronic parallel port radio clocks
2494 0 = /dev/pcfclock0 First Conrad radio clock
2495 1 = /dev/pcfclock1 Second Conrad radio clock
2496 ...
2497
2498 182 char Picture Elements THR2 binarizer
2499 0 = /dev/pethr0 First THR2 board
2500 1 = /dev/pethr1 Second THR2 board
2501 ...
2502
2503 183 char SST 5136-DN DeviceNet interface
2504 0 = /dev/ss5136dn0 First DeviceNet interface
2505 1 = /dev/ss5136dn1 Second DeviceNet interface
2506 ...
2507
2508 This device used to be assigned to major number 144.
2509 It had to be moved due to an unfortunate conflict.
2510
2511 184 char Picture Elements' video simulator/sender
2512 0 = /dev/pevss0 First sender board
2513 1 = /dev/pevss1 Second sender board
2514 ...
2515
2516 185 char InterMezzo high availability file system
2517 0 = /dev/intermezzo0 First cache manager
2518 1 = /dev/intermezzo1 Second cache manager
2519 ...
2520
2521 See http://web.archive.org/web/20080115195241/
2522 http://inter-mezzo.org/index.html
2523
2524 186 char Object-based storage control device
2525 0 = /dev/obd0 First obd control device
2526 1 = /dev/obd1 Second obd control device
2527 ...
2528
2529 See ftp://ftp.lustre.org/pub/obd for code and information.
2530
2531 187 char DESkey hardware encryption device
2532 0 = /dev/deskey0 First DES key
2533 1 = /dev/deskey1 Second DES key
2534 ...
2535
2536 188 char USB serial converters
2537 0 = /dev/ttyUSB0 First USB serial converter
2538 1 = /dev/ttyUSB1 Second USB serial converter
2539 ...
2540
2541 189 char USB serial converters - alternate devices
2542 0 = /dev/cuusb0 Callout device for ttyUSB0
2543 1 = /dev/cuusb1 Callout device for ttyUSB1
2544 ...
2545
2546 190 char Kansas City tracker/tuner card
2547 0 = /dev/kctt0 First KCT/T card
2548 1 = /dev/kctt1 Second KCT/T card
2549 ...
2550
2551 191 char Reserved for PCMCIA
2552
2553 192 char Kernel profiling interface
2554 0 = /dev/profile Profiling control device
2555 1 = /dev/profile0 Profiling device for CPU 0
2556 2 = /dev/profile1 Profiling device for CPU 1
2557 ...
2558
2559 193 char Kernel event-tracing interface
2560 0 = /dev/trace Tracing control device
2561 1 = /dev/trace0 Tracing device for CPU 0
2562 2 = /dev/trace1 Tracing device for CPU 1
2563 ...
2564
2565 194 char linVideoStreams (LINVS)
2566 0 = /dev/mvideo/status0 Video compression status
2567 1 = /dev/mvideo/stream0 Video stream
2568 2 = /dev/mvideo/frame0 Single compressed frame
2569 3 = /dev/mvideo/rawframe0 Raw uncompressed frame
2570 4 = /dev/mvideo/codec0 Direct codec access
2571 5 = /dev/mvideo/video4linux0 Video4Linux compatibility
2572
2573 16 = /dev/mvideo/status1 Second device
2574 ...
2575 32 = /dev/mvideo/status2 Third device
2576 ...
2577 ...
2578 240 = /dev/mvideo/status15 16th device
2579 ...
2580
2581 195 char Nvidia graphics devices
2582 0 = /dev/nvidia0 First Nvidia card
2583 1 = /dev/nvidia1 Second Nvidia card
2584 ...
2585 255 = /dev/nvidiactl Nvidia card control device
2586
2587 196 char Tormenta T1 card
2588 0 = /dev/tor/0 Master control channel for all cards
2589 1 = /dev/tor/1 First DS0
2590 2 = /dev/tor/2 Second DS0
2591 ...
2592 48 = /dev/tor/48 48th DS0
2593 49 = /dev/tor/49 First pseudo-channel
2594 50 = /dev/tor/50 Second pseudo-channel
2595 ...
2596
2597 197 char OpenTNF tracing facility
2598 0 = /dev/tnf/t0 Trace 0 data extraction
2599 1 = /dev/tnf/t1 Trace 1 data extraction
2600 ...
2601 128 = /dev/tnf/status Tracing facility status
2602 130 = /dev/tnf/trace Tracing device
2603
2604 198 char Total Impact TPMP2 quad coprocessor PCI card
2605 0 = /dev/tpmp2/0 First card
2606 1 = /dev/tpmp2/1 Second card
2607 ...
2608
2609 199 char Veritas volume manager (VxVM) volumes
2610 0 = /dev/vx/rdsk/*/* First volume
2611 1 = /dev/vx/rdsk/*/* Second volume
2612 ...
2613
2614 199 block Veritas volume manager (VxVM) volumes
2615 0 = /dev/vx/dsk/*/* First volume
2616 1 = /dev/vx/dsk/*/* Second volume
2617 ...
2618
2619 The namespace in these directories is maintained by
2620 the user space VxVM software.
2621
2622 200 char Veritas VxVM configuration interface
2623 0 = /dev/vx/config Configuration access node
2624 1 = /dev/vx/trace Volume i/o trace access node
2625 2 = /dev/vx/iod Volume i/o daemon access node
2626 3 = /dev/vx/info Volume information access node
2627 4 = /dev/vx/task Volume tasks access node
2628 5 = /dev/vx/taskmon Volume tasks monitor daemon
2629
2630 201 char Veritas VxVM dynamic multipathing driver
2631 0 = /dev/vx/rdmp/* First multipath device
2632 1 = /dev/vx/rdmp/* Second multipath device
2633 ...
2634 201 block Veritas VxVM dynamic multipathing driver
2635 0 = /dev/vx/dmp/* First multipath device
2636 1 = /dev/vx/dmp/* Second multipath device
2637 ...
2638
2639 The namespace in these directories is maintained by
2640 the user space VxVM software.
2641
2642 202 char CPU model-specific registers
2643 0 = /dev/cpu/0/msr MSRs on CPU 0
2644 1 = /dev/cpu/1/msr MSRs on CPU 1
2645 ...
2646
2647 202 block Xen Virtual Block Device
2648 0 = /dev/xvda First Xen VBD whole disk
2649 16 = /dev/xvdb Second Xen VBD whole disk
2650 32 = /dev/xvdc Third Xen VBD whole disk
2651 ...
2652 240 = /dev/xvdp Sixteenth Xen VBD whole disk
2653
2654 Partitions are handled in the same way as for IDE
2655 disks (see major number 3) except that the limit on
2656 partitions is 15.
2657
2658 203 char CPU CPUID information
2659 0 = /dev/cpu/0/cpuid CPUID on CPU 0
2660 1 = /dev/cpu/1/cpuid CPUID on CPU 1
2661 ...
2662
2663 204 char Low-density serial ports
2664 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2665 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2666 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2667 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2668 4 = /dev/ttyFB0 Intel Footbridge (ARM)
2669 5 = /dev/ttySA0 StrongARM builtin serial port 0
2670 6 = /dev/ttySA1 StrongARM builtin serial port 1
2671 7 = /dev/ttySA2 StrongARM builtin serial port 2
2672 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2673 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2674 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2675 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2676 12 = /dev/ttyFW0 Firmware console - port 0
2677 13 = /dev/ttyFW1 Firmware console - port 1
2678 14 = /dev/ttyFW2 Firmware console - port 2
2679 15 = /dev/ttyFW3 Firmware console - port 3
2680 16 = /dev/ttyAM0 ARM "AMBA" serial port 0
2681 ...
2682 31 = /dev/ttyAM15 ARM "AMBA" serial port 15
2683 32 = /dev/ttyDB0 DataBooster serial port 0
2684 ...
2685 39 = /dev/ttyDB7 DataBooster serial port 7
2686 40 = /dev/ttySG0 SGI Altix console port
2687 41 = /dev/ttySMX0 Motorola i.MX - port 0
2688 42 = /dev/ttySMX1 Motorola i.MX - port 1
2689 43 = /dev/ttySMX2 Motorola i.MX - port 2
2690 44 = /dev/ttyMM0 Marvell MPSC - port 0
2691 45 = /dev/ttyMM1 Marvell MPSC - port 1
2692 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2693 ...
2694 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2695 50 = /dev/ttyIOC0 Altix serial card
2696 ...
2697 81 = /dev/ttyIOC31 Altix serial card
2698 82 = /dev/ttyVR0 NEC VR4100 series SIU
2699 83 = /dev/ttyVR1 NEC VR4100 series DSIU
2700 84 = /dev/ttyIOC84 Altix ioc4 serial card
2701 ...
2702 115 = /dev/ttyIOC115 Altix ioc4 serial card
2703 116 = /dev/ttySIOC0 Altix ioc3 serial card
2704 ...
2705 147 = /dev/ttySIOC31 Altix ioc3 serial card
2706 148 = /dev/ttyPSC0 PPC PSC - port 0
2707 ...
2708 153 = /dev/ttyPSC5 PPC PSC - port 5
2709 154 = /dev/ttyAT0 ATMEL serial port 0
2710 ...
2711 169 = /dev/ttyAT15 ATMEL serial port 15
2712 170 = /dev/ttyNX0 Hilscher netX serial port 0
2713 ...
2714 185 = /dev/ttyNX15 Hilscher netX serial port 15
2715 186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
2716 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2717 ...
2718 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2719 191 = /dev/xvc0 Xen virtual console - port 0
2720 192 = /dev/ttyPZ0 pmac_zilog - port 0
2721 ...
2722 195 = /dev/ttyPZ3 pmac_zilog - port 3
2723 196 = /dev/ttyTX0 TX39/49 serial port 0
2724 ...
2725 204 = /dev/ttyTX7 TX39/49 serial port 7
2726 205 = /dev/ttySC0 SC26xx serial port 0
2727 206 = /dev/ttySC1 SC26xx serial port 1
2728 207 = /dev/ttySC2 SC26xx serial port 2
2729 208 = /dev/ttySC3 SC26xx serial port 3
2730 209 = /dev/ttyMAX0 MAX3100 serial port 0
2731 210 = /dev/ttyMAX1 MAX3100 serial port 1
2732 211 = /dev/ttyMAX2 MAX3100 serial port 2
2733 212 = /dev/ttyMAX3 MAX3100 serial port 3
2734
2735 205 char Low-density serial ports (alternate device)
2736 0 = /dev/culu0 Callout device for ttyLU0
2737 1 = /dev/culu1 Callout device for ttyLU1
2738 2 = /dev/culu2 Callout device for ttyLU2
2739 3 = /dev/culu3 Callout device for ttyLU3
2740 4 = /dev/cufb0 Callout device for ttyFB0
2741 5 = /dev/cusa0 Callout device for ttySA0
2742 6 = /dev/cusa1 Callout device for ttySA1
2743 7 = /dev/cusa2 Callout device for ttySA2
2744 8 = /dev/cusc0 Callout device for ttySC0
2745 9 = /dev/cusc1 Callout device for ttySC1
2746 10 = /dev/cusc2 Callout device for ttySC2
2747 11 = /dev/cusc3 Callout device for ttySC3
2748 12 = /dev/cufw0 Callout device for ttyFW0
2749 13 = /dev/cufw1 Callout device for ttyFW1
2750 14 = /dev/cufw2 Callout device for ttyFW2
2751 15 = /dev/cufw3 Callout device for ttyFW3
2752 16 = /dev/cuam0 Callout device for ttyAM0
2753 ...
2754 31 = /dev/cuam15 Callout device for ttyAM15
2755 32 = /dev/cudb0 Callout device for ttyDB0
2756 ...
2757 39 = /dev/cudb7 Callout device for ttyDB7
2758 40 = /dev/cusg0 Callout device for ttySG0
2759 41 = /dev/ttycusmx0 Callout device for ttySMX0
2760 42 = /dev/ttycusmx1 Callout device for ttySMX1
2761 43 = /dev/ttycusmx2 Callout device for ttySMX2
2762 46 = /dev/cucpm0 Callout device for ttyCPM0
2763 ...
2764 49 = /dev/cucpm5 Callout device for ttyCPM5
2765 50 = /dev/cuioc40 Callout device for ttyIOC40
2766 ...
2767 81 = /dev/cuioc431 Callout device for ttyIOC431
2768 82 = /dev/cuvr0 Callout device for ttyVR0
2769 83 = /dev/cuvr1 Callout device for ttyVR1
2770
2771 206 char OnStream SC-x0 tape devices
2772 0 = /dev/osst0 First OnStream SCSI tape, mode 0
2773 1 = /dev/osst1 Second OnStream SCSI tape, mode 0
2774 ...
2775 32 = /dev/osst0l First OnStream SCSI tape, mode 1
2776 33 = /dev/osst1l Second OnStream SCSI tape, mode 1
2777 ...
2778 64 = /dev/osst0m First OnStream SCSI tape, mode 2
2779 65 = /dev/osst1m Second OnStream SCSI tape, mode 2
2780 ...
2781 96 = /dev/osst0a First OnStream SCSI tape, mode 3
2782 97 = /dev/osst1a Second OnStream SCSI tape, mode 3
2783 ...
2784 128 = /dev/nosst0 No rewind version of /dev/osst0
2785 129 = /dev/nosst1 No rewind version of /dev/osst1
2786 ...
2787 160 = /dev/nosst0l No rewind version of /dev/osst0l
2788 161 = /dev/nosst1l No rewind version of /dev/osst1l
2789 ...
2790 192 = /dev/nosst0m No rewind version of /dev/osst0m
2791 193 = /dev/nosst1m No rewind version of /dev/osst1m
2792 ...
2793 224 = /dev/nosst0a No rewind version of /dev/osst0a
2794 225 = /dev/nosst1a No rewind version of /dev/osst1a
2795 ...
2796
2797 The OnStream SC-x0 SCSI tapes do not support the
2798 standard SCSI SASD command set and therefore need
2799 their own driver "osst". Note that the IDE, USB (and
2800 maybe ParPort) versions may be driven via ide-scsi or
2801 usb-storage SCSI emulation and this osst device and
2802 driver as well. The ADR-x0 drives are QIC-157
2803 compliant and don't need osst.
2804
2805 207 char Compaq ProLiant health feature indicate
2806 0 = /dev/cpqhealth/cpqw Redirector interface
2807 1 = /dev/cpqhealth/crom EISA CROM
2808 2 = /dev/cpqhealth/cdt Data Table
2809 3 = /dev/cpqhealth/cevt Event Log
2810 4 = /dev/cpqhealth/casr Automatic Server Recovery
2811 5 = /dev/cpqhealth/cecc ECC Memory
2812 6 = /dev/cpqhealth/cmca Machine Check Architecture
2813 7 = /dev/cpqhealth/ccsm Deprecated CDT
2814 8 = /dev/cpqhealth/cnmi NMI Handling
2815 9 = /dev/cpqhealth/css Sideshow Management
2816 10 = /dev/cpqhealth/cram CMOS interface
2817 11 = /dev/cpqhealth/cpci PCI IRQ interface
2818
2819 208 char User space serial ports
2820 0 = /dev/ttyU0 First user space serial port
2821 1 = /dev/ttyU1 Second user space serial port
2822 ...
2823
2824 209 char User space serial ports (alternate devices)
2825 0 = /dev/cuu0 Callout device for ttyU0
2826 1 = /dev/cuu1 Callout device for ttyU1
2827 ...
2828
2829 210 char SBE, Inc. sync/async serial card
2830 0 = /dev/sbei/wxcfg0 Configuration device for board 0
2831 1 = /dev/sbei/dld0 Download device for board 0
2832 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2833 3 = /dev/sbei/wan01 WAN device, port 1, board 0
2834 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2835 5 = /dev/sbei/wan03 WAN device, port 3, board 0
2836 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
2837 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
2838 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2839 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
2840 10 = /dev/sbei/wxcfg1 Configuration device for board 1
2841 11 = /dev/sbei/dld1 Download device for board 1
2842 12 = /dev/sbei/wan10 WAN device, port 0, board 1
2843 13 = /dev/sbei/wan11 WAN device, port 1, board 1
2844 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2845 15 = /dev/sbei/wan13 WAN device, port 3, board 1
2846 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
2847 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
2848 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2849 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
2850 ...
2851
2852 Yes, each board is really spaced 10 (decimal) apart.
2853
2854 211 char Addinum CPCI1500 digital I/O card
2855 0 = /dev/addinum/cpci1500/0 First CPCI1500 card
2856 1 = /dev/addinum/cpci1500/1 Second CPCI1500 card
2857 ...
2858
2859 212 char LinuxTV.org DVB driver subsystem
2860 0 = /dev/dvb/adapter0/video0 first video decoder of first card
2861 1 = /dev/dvb/adapter0/audio0 first audio decoder of first card
2862 2 = /dev/dvb/adapter0/sec0 (obsolete/unused)
2863 3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
2864 4 = /dev/dvb/adapter0/demux0 first demux device of first card
2865 5 = /dev/dvb/adapter0/dvr0 first digital video recoder device of first card
2866 6 = /dev/dvb/adapter0/ca0 first common access port of first card
2867 7 = /dev/dvb/adapter0/net0 first network device of first card
2868 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2869 9 = /dev/dvb/adapter0/video1 second video decoder of first card
2870 ...
2871 64 = /dev/dvb/adapter1/video0 first video decoder of second card
2872 ...
2873 128 = /dev/dvb/adapter2/video0 first video decoder of third card
2874 ...
2875 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
2876
2877 216 char Bluetooth RFCOMM TTY devices
2878 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
2879 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
2880 ...
2881
2882 217 char Bluetooth RFCOMM TTY devices (alternate devices)
2883 0 = /dev/curf0 Callout device for rfcomm0
2884 1 = /dev/curf1 Callout device for rfcomm1
2885 ...
2886
2887 218 char The Logical Company bus Unibus/Qbus adapters
2888 0 = /dev/logicalco/bci/0 First bus adapter
2889 1 = /dev/logicalco/bci/1 First bus adapter
2890 ...
2891
2892 219 char The Logical Company DCI-1300 digital I/O card
2893 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2894 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2895 ...
2896
2897 220 char Myricom Myrinet "GM" board
2898 0 = /dev/myricom/gm0 First Myrinet GM board
2899 1 = /dev/myricom/gmp0 First board "root access"
2900 2 = /dev/myricom/gm1 Second Myrinet GM board
2901 3 = /dev/myricom/gmp1 Second board "root access"
2902 ...
2903
2904 221 char VME bus
2905 0 = /dev/bus/vme/m0 First master image
2906 1 = /dev/bus/vme/m1 Second master image
2907 2 = /dev/bus/vme/m2 Third master image
2908 3 = /dev/bus/vme/m3 Fourth master image
2909 4 = /dev/bus/vme/s0 First slave image
2910 5 = /dev/bus/vme/s1 Second slave image
2911 6 = /dev/bus/vme/s2 Third slave image
2912 7 = /dev/bus/vme/s3 Fourth slave image
2913 8 = /dev/bus/vme/ctl Control
2914
2915 It is expected that all VME bus drivers will use the
2916 same interface. For interface documentation see
2917 http://www.vmelinux.org/.
2918
2919 224 char A2232 serial card
2920 0 = /dev/ttyY0 First A2232 port
2921 1 = /dev/ttyY1 Second A2232 port
2922 ...
2923
2924 225 char A2232 serial card (alternate devices)
2925 0 = /dev/cuy0 Callout device for ttyY0
2926 1 = /dev/cuy1 Callout device for ttyY1
2927 ...
2928
2929 226 char Direct Rendering Infrastructure (DRI)
2930 0 = /dev/dri/card0 First graphics card
2931 1 = /dev/dri/card1 Second graphics card
2932 ...
2933
2934 227 char IBM 3270 terminal Unix tty access
2935 1 = /dev/3270/tty1 First 3270 terminal
2936 2 = /dev/3270/tty2 Seconds 3270 terminal
2937 ...
2938
2939 228 char IBM 3270 terminal block-mode access
2940 0 = /dev/3270/tub Controlling interface
2941 1 = /dev/3270/tub1 First 3270 terminal
2942 2 = /dev/3270/tub2 Second 3270 terminal
2943 ...
2944
2945 229 char IBM iSeries/pSeries virtual console
2946 0 = /dev/hvc0 First console port
2947 1 = /dev/hvc1 Second console port
2948 ...
2949
2950 230 char IBM iSeries virtual tape
2951 0 = /dev/iseries/vt0 First virtual tape, mode 0
2952 1 = /dev/iseries/vt1 Second virtual tape, mode 0
2953 ...
2954 32 = /dev/iseries/vt0l First virtual tape, mode 1
2955 33 = /dev/iseries/vt1l Second virtual tape, mode 1
2956 ...
2957 64 = /dev/iseries/vt0m First virtual tape, mode 2
2958 65 = /dev/iseries/vt1m Second virtual tape, mode 2
2959 ...
2960 96 = /dev/iseries/vt0a First virtual tape, mode 3
2961 97 = /dev/iseries/vt1a Second virtual tape, mode 3
2962 ...
2963 128 = /dev/iseries/nvt0 First virtual tape, mode 0, no rewind
2964 129 = /dev/iseries/nvt1 Second virtual tape, mode 0, no rewind
2965 ...
2966 160 = /dev/iseries/nvt0l First virtual tape, mode 1, no rewind
2967 161 = /dev/iseries/nvt1l Second virtual tape, mode 1, no rewind
2968 ...
2969 192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
2970 193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
2971 ...
2972 224 = /dev/iseries/nvt0a First virtual tape, mode 3, no rewind
2973 225 = /dev/iseries/nvt1a Second virtual tape, mode 3, no rewind
2974 ...
2975
2976 "No rewind" refers to the omission of the default
2977 automatic rewind on device close. The MTREW or MTOFFL
2978 ioctl()'s can be used to rewind the tape regardless of
2979 the device used to access it.
2980
2981 231 char InfiniBand
2982 0 = /dev/infiniband/umad0
2983 1 = /dev/infiniband/umad1
2984 ...
2985 63 = /dev/infiniband/umad63 63rd InfiniBandMad device
2986 64 = /dev/infiniband/issm0 First InfiniBand IsSM device
2987 65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
2988 ...
2989 127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
2990 128 = /dev/infiniband/uverbs0 First InfiniBand verbs device
2991 129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
2992 ...
2993 159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
2994
2995 232 char Biometric Devices
2996 0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
2997 1 = /dev/biometric/sensor0/iris first iris sensor on first device
2998 2 = /dev/biometric/sensor0/retina first retina sensor on first device
2999 3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device
3000 4 = /dev/biometric/sensor0/facial first facial sensor on first device
3001 5 = /dev/biometric/sensor0/hand first hand sensor on first device
3002 ...
3003 10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
3004 ...
3005 20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
3006 ...
3007
3008 233 char PathScale InfiniPath interconnect
3009 0 = /dev/ipath Primary device for programs (any unit)
3010 1 = /dev/ipath0 Access specifically to unit 0
3011 2 = /dev/ipath1 Access specifically to unit 1
3012 ...
3013 4 = /dev/ipath3 Access specifically to unit 3
3014 129 = /dev/ipath_sma Device used by Subnet Management Agent
3015 130 = /dev/ipath_diag Device used by diagnostics programs
3016
3017 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3018 Character devices that request a dynamic allocation of major number will
3019 take numbers starting from 254 and downward.
3020
3021 240-254 block LOCAL/EXPERIMENTAL USE
3022 Allocated for local/experimental use. For devices not
3023 assigned official numbers, these ranges should be
3024 used in order to avoid conflicting with future assignments.
3025
3026 255 char RESERVED
3027
3028 255 block RESERVED
3029
3030 This major is reserved to assist the expansion to a
3031 larger number space. No device nodes with this major
3032 should ever be created on the filesystem.
3033 (This is probably not true anymore, but I'll leave it
3034 for now /Torben)
3035
3036 ---LARGE MAJORS!!!!!---
3037
3038 256 char Equinox SST multi-port serial boards
3039 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
3040 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
3041 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
3042 ...
3043 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
3044
3045 256 block Resident Flash Disk Flash Translation Layer
3046 0 = /dev/rfda First RFD FTL layer
3047 16 = /dev/rfdb Second RFD FTL layer
3048 ...
3049 240 = /dev/rfdp 16th RFD FTL layer
3050
3051 257 char Phoenix Technologies Cryptographic Services Driver
3052 0 = /dev/ptlsec Crypto Services Driver
3053
3054 257 block SSFDC Flash Translation Layer filesystem
3055 0 = /dev/ssfdca First SSFDC layer
3056 8 = /dev/ssfdcb Second SSFDC layer
3057 16 = /dev/ssfdcc Third SSFDC layer
3058 24 = /dev/ssfdcd 4th SSFDC layer
3059 32 = /dev/ssfdce 5th SSFDC layer
3060 40 = /dev/ssfdcf 6th SSFDC layer
3061 48 = /dev/ssfdcg 7th SSFDC layer
3062 56 = /dev/ssfdch 8th SSFDC layer
3063
3064 258 block ROM/Flash read-only translation layer
3065 0 = /dev/blockrom0 First ROM card's translation layer interface
3066 1 = /dev/blockrom1 Second ROM card's translation layer interface
3067 ...
3068
3069 259 block Block Extended Major
3070 Used dynamically to hold additional partition minor
3071 numbers and allow large numbers of partitions per device
3072
3073 259 char FPGA configuration interfaces
3074 0 = /dev/icap0 First Xilinx internal configuration
3075 1 = /dev/icap1 Second Xilinx internal configuration
3076
3077 260 char OSD (Object-based-device) SCSI Device
3078 0 = /dev/osd0 First OSD Device
3079 1 = /dev/osd1 Second OSD Device
3080 ...
3081 255 = /dev/osd255 256th OSD Device
Linux 6.x block layer and io_uring tree(s)