projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| ce21bfe6 PA |
1 | Link Layer Validation Device is a standard device for testing of Super |
| 2 | Speed Link Layer tests. These nodes are available in sysfs only when lvs | |
| 3 | driver is bound with root hub device. | |
| 4 | ||
| 5 | What: /sys/bus/usb/devices/.../get_dev_desc | |
| 6 | Date: March 2014 | |
| e34cadde | 7 | Contact: Pratyush Anand <pratyush.anand@gmail.com> |
| ce21bfe6 PA |
8 | Description: |
| 9 | Write to this node to issue "Get Device Descriptor" | |
| 10 | for Link Layer Validation device. It is needed for TD.7.06. | |
| 11 | ||
| 12 | What: /sys/bus/usb/devices/.../u1_timeout | |
| 13 | Date: March 2014 | |
| e34cadde | 14 | Contact: Pratyush Anand <pratyush.anand@gmail.com> |
| ce21bfe6 PA |
15 | Description: |
| 16 | Set "U1 timeout" for the downstream port where Link Layer | |
| 17 | Validation device is connected. Timeout value must be between 0 | |
| 18 | and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21. | |
| 19 | ||
| 20 | What: /sys/bus/usb/devices/.../u2_timeout | |
| 21 | Date: March 2014 | |
| e34cadde | 22 | Contact: Pratyush Anand <pratyush.anand@gmail.com> |
| ce21bfe6 PA |
23 | Description: |
| 24 | Set "U2 timeout" for the downstream port where Link Layer | |
| 25 | Validation device is connected. Timeout value must be between 0 | |
| 26 | and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21. | |
| 27 | ||
| 28 | What: /sys/bus/usb/devices/.../hot_reset | |
| 29 | Date: March 2014 | |
| e34cadde | 30 | Contact: Pratyush Anand <pratyush.anand@gmail.com> |
| ce21bfe6 PA |
31 | Description: |
| 32 | Write to this node to issue "Reset" for Link Layer Validation | |
| 33 | device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35. | |
| 34 | ||
| 35 | What: /sys/bus/usb/devices/.../u3_entry | |
| 36 | Date: March 2014 | |
| e34cadde | 37 | Contact: Pratyush Anand <pratyush.anand@gmail.com> |
| ce21bfe6 PA |
38 | Description: |
| 39 | Write to this node to issue "U3 entry" for Link Layer | |
| 40 | Validation device. It is needed for TD.7.35 and TD.7.36. | |
| 41 | ||
| 42 | What: /sys/bus/usb/devices/.../u3_exit | |
| 43 | Date: March 2014 | |
| e34cadde | 44 | Contact: Pratyush Anand <pratyush.anand@gmail.com> |
| ce21bfe6 PA |
45 | Description: |
| 46 | Write to this node to issue "U3 exit" for Link Layer | |
| 47 | Validation device. It is needed for TD.7.36. | |
| f624ec70 JP |
48 | |
| 49 | What: /sys/bus/usb/devices/.../enable_compliance | |
| 50 | Date: July 2017 | |
| 51 | Description: | |
| 52 | Write to this node to set the port to compliance mode to test | |
| 53 | with Link Layer Validation device. It is needed for TD.7.34. | |
| 54 | ||
| 55 | What: /sys/bus/usb/devices/.../warm_reset | |
| 56 | Date: July 2017 | |
| 57 | Description: | |
| 58 | Write to this node to issue "Warm Reset" for Link Layer Validation | |
| 59 | device. It may be needed to properly reset an xHCI 1.1 host port if | |
| 60 | compliance mode needed to be explicitly enabled. |