drm/amdgpu: fix documentation for amdgpu_pm.c

Fix DOC link name, clean up formatting in pp_dpm_* section.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/ih: fix documentation in amdgpu_irq_dispatch

Fix parameters.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vm: fix up documentation in amdgpu_vm.c

Missing parameters, wrong comment type, etc.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mn: fix documentation for amdgpu_mn_read_lock

Document the new parameter.

Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix documentation for amdgpu_gem_prime_export

Drop extra function parameter.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display; Fix kernel doc warnings

We had a couple of missing definitions and formatting errors.

v2: Fix 'notifying' type

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove excess function parameter description

Fixes gcc warning:

drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:431: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:550: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_enable_clock_gating'

Fixes: cbead2bdfcf1 ("drm/amdgpu: add VCN2.5 VCPU start and stop")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: hide an unused variable

Without CONFIG_DEBUG_FS, we get a warning for an unused
variable:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6020:33: error: unused variable 'source' [-Werror,-Wunused-variable]

Hide the variable in an #ifdef like its only users.

Fixes: 14b2584636c6 ("drm/amd/display: add functionality to grab DPRX CRC entries.")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable full ras by default

Enable full ras by default, user does not need to enable it by
boot parameter.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/SRIOV: add navi12 pci id for SRIOV (v2)

Add Navi12 PCI id support.

v2: flag as experimental for now (Alex)

Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: update gfx golden settings for navi14

update registers: mmUTCL1_CTRL

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: update gfx golden settings

update registers: mmUTCL1_CTRL

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: flag navi12 and 14 as experimental for 5.4

We can remove this later as things get closer to launch.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: invalidate the hdp read cache before reading the psp response

Otherwise we may get stale data.

Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: flush HDP write fifo after submitting cmds to the psp

We need to make sure the fifo is flushed before we ask the psp to
process the commands.

Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant variable definition

No need to define the same variables in each loop of the function.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: avoid null pointer dereference

null ptr should be checked first to avoid null ptr access

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add new mapping for APCC_DFLL feature

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do not init mec2 jt for renoir

For ASICs like renoir/arct, driver doesn't need to load mec2 jt.
when mec1 jt is loaded, mec2 jt will be loaded automatically
since the write is actaully broadcasted to both.

We need to more time to test other gfx9 asic. but for now we should
be able to draw conclusion that mec2 jt is not needed for renoir and
arct.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp ip block for arct

enable psp block for firmware loading and other security
feature setup.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Restore backlight brightness after system resume

Laptops with AMD APU doesn't restore display backlight brightness after
system resume.

This issue started when DC was introduced.

Let's use BL_CORE_SUSPENDRESUME so the backlight core calls
update_status callback after system resume to restore the backlight
level.

Tested on Dell Inspiron 3180 (Stoney Ridge) and Dell Latitude 5495
(Raven Ridge).

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/ras: use GPU PAGE_SIZE/SHIFT for reserving pages

We are reserving vram pages so they should be aligned to the
GPU page size.

Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: get gpu info from ip discovery table

except soc_bounding_box which is not integrated in discovery table yet

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use GPU PAGE SHIFT for umc retired page

umc retired page belongs to vram and it should be aligned to gpu page
size

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implement VCN power gating control interface

VCN Gate/Ungate by processing the SMU power up/down message, otherwise
S3 will resume failed as JPEG always power off during start VCN stage.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add navi12 pci id

Add Navi12 PCI id support.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: replace DRM_ERROR with DRM_WARN in ras_reserve_bad_pages

There are two cases of reserve error should be ignored:
1) a ras bad page has been allocated (used by someone);
2) a ras bad page has been reserved (duplicate error injection for one page);

DRM_ERROR is unnecessary for the failure of bad page reserve

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

docs: drm/amdgpu: Resolve build warnings

Some of the documentation formatting could be improved
which will resolve some Sphinx amdgpu build warnings e.g

WARNING: Unexpected indentation.
WARNING: Block quote ends without a blank line; unexpected unindent.
WARNING: Inline emphasis start-string without end-string.

Signed-off-by: Adam Zerella <adam.zerella@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vm: fix documentation for amdgpu_vm_bo_param

Add new parameters.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Delete unused KFD_IS_* macro

These were deleted before, but somehow showed up again. Delete them again.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add hdcp to Kconfig

[Why]
HDCP is not fully finished, so we need to be able to
build and run the driver without it.

[How]
Add a Kconfig to toggle it

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: only enable HDCP for DCN+

[Why]
We don't support HDCP for pre RAVEN asics

[How]
Check if we are RAVEN+. Use this to attach the content_protection
property, this way usermode can't try to enable HDCP on pre DCN asics.

Also we need to update the module on hpd so guard it aswell

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update CP property based on HW query

[Why]
We need to use HW state to set content protection to ENABLED.
This way we know that the link is encrypted from the HW side

[How]
Create a workqueue that queries the HW every ~2seconds, and sets it to
ENABLED or DESIRED based on the result from the hardware

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: handle DP cpirq

[Why]
This is needed for DP as DP can send us info using irq.

[How]
Check if irq bit is set on short pulse and call the
function that handles cpirq in amdgpu_dm_hdcp

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle Content protection property changes

[Why]
We need to manage the content protection property changes for
different usecase, once cp is DESIRED we need to maintain the
ENABLED/DESIRED status for different cases.

[How]
1. Attach the content_protection property

2. HDCP enable (UNDESIRED -> DESIRED)
call into the module with the correct parameters to start
hdcp. Set cp to ENABLED

3. HDCP disable (ENABLED -> UNDESIRED)
Call the module to disable hdcp.

3. Handle Special cases (Hotplug, S3, headless S3, DPMS)
If already ENABLED: set to DESIRED on unplug/suspend/dpms,
and disable hdcp

Then on plugin/resume/dpms: enable HDCP

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Initialize HDCP work queue

[Why]
We need this to enable HDCP on linux, as we need events to interact
with the hdcp module

[How]
Add work queue to display manager and handle the creation and destruction
of the queue

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create dpcd and i2c packing functions

[Why]
We need to read and write specific i2c and dpcd messages.

[How]
Created static functions for packing the dpcd and i2c messages for hdcp.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create amdgpu_dm_hdcp

[Why]
We need to interact with the hdcp module from the DM, the module
has to be interacted with in terms of events

[How]
Create the files needed for linux hdcp. These files manage the events
needed for the dm to interact with the hdcp module.

We use the kernel work queue to process the events needed for
the module

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update hdcp display config

[Why]
We need to update the hdcp display parameter whenever the link is
updated, so the next time there is an update to hdcp we have the
latest display info

[How]
Create a callback, and use this anytime there is a change in the link. This will
be used later by the dm.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add PSP block to verify hdcp steps

[Why]
All the HDCP transactions should be verified using PSP.

[How]
This patch calls psp with the correct inputs to verify the steps
of authentication.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add HDCP module

This module manages HDCP for amdgpu driver. The module behaves as a
state machine which handles the different authentication states of HDCP

The module is divided into 3 major components
+--------+
| Hdcp.c |
+--------+
Manages the state machine, sends the events to be executed and communicates
with the dm

+-----------+
|Execution.c|
+-----------+
This executes events based on the current state. Also generates
execution results as transition inputs

+------------+
|Transition.c|
+------------+
Decides the next state based on the input and makes requests to
hdcp.c to handle.
                                +-------------+
                        ------> | Execution.c | ------
                        |       +-------------+       |
                        |                             V
+----+              +--------+                 +--------------+
| DM |    ----->    | Hdcp.c |  <------------  | Transition.c |
+----+    <-----    +--------+                 +--------------+

v2: Drop unused function definitions

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: psp DTM init

DTM is the display topology manager. This is needed to communicate with
psp about the display configurations.

This patch adds
    -Loading the firmware
    -The functions and definitions for communication with the firmware

v2: Fix formatting

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: psp HDCP init

This patch adds
-Loading the firmware
-The functions and definitions for communication with the firmware

v2: Fix formatting

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improve LFC behaviour

[Why]
There can be some unsynchronized frames when entering/exiting
LFC.  This may cause tearing or stuttering at such transitions.

[How]
Add a enter/exit margin to algorithm to smoothly transition into
and out of LFC without desynchronizing frames.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Reza Amini <Reza.Amini@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add detile buffer size for DCN20

Detile buffer size affects dcc caps and therefore needs to be
corrected for each ip.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix use of uninitialized variable

tg_inst may be used uninitialized, so initialize it to 0.

Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.51.1

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing HBM support and raise Vega20's uclk.

[Why]
When more than 2 displays are connected to the graphics card,
only the minimum memory clock is needed. However, when more
displays are connected, the minimum memory clock is not
sufficient enough to support the overwhelming bandwidth.
System will hang under this circumstance.

Also, the old code didn't address HBM cards, which has 2
pseudo channels. We need to add the HBM part here.

[How]
When graphics card connects to 2 or more displays,
switch to high memory clock. Also, choose memory
multiplier based on whether its regular DRAM or HBM.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.51

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable single dp seamless boot

[why]
seamless boot didn't work for non edp's before

[how]
removed edp-specific code, made dp read uefi-set link settings. Also fixed
a hubbub code line to be consistent with usage of function.

Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update odm mode validation to be in line with policy

Previously 8k30 worked with dsc and odm combine due to a workaround that ran
the formula a second time with dsc support enable should dsc validation fail.
This worked when clocks were low enough for formula to enable odm to lower
voltage, however now broke due to increased clocks.

This change updates the ODM combine policy within the formula to properly
reflect our current policy within DC, only enabling ODM when we have to, as
well as adding a check for viewport width when dsc is enabled.

As a side effect the redundant call to dml when odm is required is now
unnecessary.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Optimize clocks on clock change

[WHY]
Presently, there is no way for clocks to be lowered, only raised.

[HOW]
Compare clock status against previous known clock status, and optimize
if different.
This requires re-ordering the layout of the dc_clocks structure, as the
current ordering allows identical clock states to appear different.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set number of pipes to 1 if the second pipe was disabled

[why]
Some ODM-related register settings are inconsistently updated by VBIOS, causing
the state in DC to be invalid, which would then end up crashing in certain
use-cases (such as disable/enable device).

[how]
Check the enabled status of the second pipe when determining the number of
OPTC sources. If the second pipe is disabled, set the number of sources to 1
regardless of other settings (that may not be updated correctly).

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set minimum abm backlight level

[Why]
A lot of the time, the backlight characteristic curve maps min backlight
to a non-zero value.
But there are cases where we want the curve to intersect at 0.
In this scenario even if OS never asks to set 0% backlight, the ABM
reduction can result in backlight being lowered close to 0.
This particularly can cause problems in some LED drivers, and in
general just looks like backlight is completely off.

[How]
Add default cap to disallow backlight from dropping below 1%
even after ABM reduction is applied.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert fixup DPP programming sequence

[WHY]
This change was made because DTO programming was double-buffered, which
is itself an issue. After deactivating the DTO double buffer, this
change becomes unnecessary.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not double-buffer DTO adjustments

[WHY]
When changing DPP global ref clock, DTO adjustments must take effect
immediately, or else underflow may occur.
It appears the original decision to double-buffer DTO adjustments was made to
prevent underflows that occur when raising DPP ref clock (which is not
double-buffered), but that same decision causes similar issues when
lowering DPP global ref clock. The better solution is to order the
adjustments according to whether clocks are being raised or lowered.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Separate hardware initialization from creation

[Why]
Separating the hardware initialization from the creation of the
dc structures gives greater flexibility to the dm to override
options for debugging.

[How]
Move the hardware initialization call to a new function,
dc_hardware_init. No functional change is intended.

Signed-off-by: Julian Parkin <julian.parkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix i2c wtire mot incorrect issue

[Why]
I2C write command always send mot = true will cause sink state incorrect.

[How]
1. Remove default i2c write mot = true.
2. Deciding mot flag by is_end_of_payload flag.

Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle virtual signal type in disable_link()

[Why]
The new implementation changed the behavior to allow process setMode
to DAL when DAL returns empty mode query for unplugged display.
This will trigger additional disable_link().
When unplug HDMI from MST dock, driver will update stream->signal to
"Virtual". disable_link() will call disable_output() if the signal type
is not DP and induce other displays on MST dock show black screen.

[How]
Don't need to process disable_output() if the signal type is virtual.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix global sync param extraction indexing

dcn20_calculate_dlg_params was incorrectly indexing pipe src and
dst structs when extracting global sync params.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add vtg update after global sync update

Global sync update was missing vtg update resulting in underflow if
vstartup decreased a significant amount.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debugfs entry to force YUV420 output

[Why]
Even if YUV420 is available for video mode, YUV444 is still
automatically selected. This poses a problem for compliance tests.

[How]
Add a per-connector debugfs entry "force_yuv420_output" to force
selection of YUV420 mode.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add additional flag consideration for surface update

Surface dchub/dpp update would not trigger if a stream update was the
only cause. This change now allows stream flags to trigger this update.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Replace for loop w/ function call

[WHY]
A function to adjust DPP clocks with DTO already exists; function code
is identical to the code replaced here

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rebuild mapped resources after pipe split

[why]
The issue is specific for linux, as on timings such as 8K@60
or 4K@144 DSC should be working in combination with ODM Combine
in order to ensure that we can run those timings. The validation
for those timings was passing, but when pipe split was happening
second pipe wasn't being programmed.

[how]
Rebuild mapped resources if we split stream for ODM.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.50

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: define parameters for abm 2.3

[Why]
Current configuration 0 is just a placeholder, and final parameters needed.
Also, configuration 1 is expected to emulate ABM 2.1 but is too aggressive.

[How]
Redefine configuration 0 with the finalized parameters, and increase the
contrast gain of configuration 1 so that it properly emulates ABM 2.1.

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix HUBP secondary viewport programming

[Why]
Secondary viewport dimension/position registers are not programmed,
which can cause issues in some stereo configurations.

[How]
Add register definitions and register programming.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup creating BOs at fixed location (v2)

The placement is something TTM/BO internal and the RAS code should
avoid touching that directly.

Add a helper to create a BO at a fixed location and use that instead.

v2: squash in fixes (Alex)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Fix EEPROM checksum calculation.

Fix checksum calculation after manually resetting the table.
Unify reset and empty EEPROM init flow.
Protect the table reset with lock.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ras ctrl debugfs node leak

Use debugfs_remove_recursive to remove the whole debugfs
directory instead of removing the node one by one.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: trace if a PD/PT update is done directly

This is usfull for debugging.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop double HDP flush in the VM code

Already done in the CPU based backend code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup coding style in the VM code a bit

No functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: revert "disable bulk moves for now"

This reverts commit a213c2c7e235cfc0e0a161a558f7fdf2fb3a624a.

The changes to fix this should have landed in 5.1.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zhou, David(ChunMing) <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/SRIOV: Navi12 SRIOV VF gets GTT base

With changes in PSP and HV, SRIOV VF will handle

vram gtt location just like bare metal. There is

no need to differentiate it anymore.

Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove program of lbpw for renoir

These is no LBPW on Renoir. So removing program of lbpw for renoir.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Swap trap temporary registers in gfx10 trap handler

ttmp[4:5] hold information useful to the debugger. Use ttmp[14:15]
instead, aligning implementation with gfx9 trap handler.

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove the redundant null checks

debugfs_remove and kfree has taken the null check in account.
hence it is unnecessary to check it. Just remove the condition.
No functional change.

This issue was detected by using the Coccinelle software.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: be quiet when no SAD block is found

It is fine for displays without audio functionality to not provide
any SAD block in their EDID. Do not log an error in that case,
just return quietly.

Inspired by a similar fix to the amdgpu driver in the context of bug
fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: be quiet when no SAD block is found

It is fine for displays without audio functionality to not provide
any SAD block in their EDID. Do not log an error in that case,
just return quietly.

This fixes half of bug fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Check for valid number of registers to read

Do not try to allocate any amount of memory requested by the user.
Instead limit it to 128 registers. Actually the longest series of
consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and
mmGB_MACROTILE_MODE0-15 (0x2644-0x2673).

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273
Signed-off-by: Trek <trek00@inbox.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed

Bail from the pci_driver probe function instead of from the drm_driver
load function.

This avoid /dev/dri/card0 temporarily getting registered and then
unregistered again, sending unwanted add / remove udev events to
userspace.

Specifically this avoids triggering the (userspace) bug fixed by this
plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59

Note that despite that being an userspace bug, not sending unnecessary
udev events is a good idea in general.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename variable eanble -> enable

There is a spelling mistake in the variable name eanble,
rename it to enable.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/nbio7.4: add hw bug workaround for vega20"

This reverts commit e01f2d41895102d824c6b8f5e011dd5e286d5e8b.

VG20 did not require this workaround, as the fix is in the VBIOS.
Leave VG10/12 workaround as some older shipped cards do not have the
VBIOS fix in place, and the kernel workaround is required in those
situations

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add graceful VM fault handling v3

Next step towards HMM support. For now just silence the retry fault and
optionally redirect the request to the dummy page.

v2: make sure the VM is not destroyed while we handle the fault.
v3: fix VM destroy check, cleanup comments

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reserve the root PD while freeing PASIDs

Free the pasid only while the root PD is reserved. This prevents use after
free in the page fault handling.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allocate PDs/PTs with no_gpu_wait in a page fault

While handling a page fault we can't wait for other ongoing GPU
operations or we can potentially run into deadlocks.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow direct submission of clears

For handling PD/PT clears directly in the fault handler.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow direct submission of PTE updates

For handling PTE updates directly in the fault handler.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow direct submission of PDE updates v2

For handling PDE updates directly in the fault handler.

v2: fix typo in comment

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow direct submission in the VM backends v2

This allows us to update page tables directly while in a page fault.

v2: use direct/delayed entities and still wait for moves

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split the VM entity into direct and delayed

For page fault handling we need to use a direct update which can't be
blocked by ongoing user CS.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: return -EBUSY on pipelining with no_gpu_wait (v2)

Setting the no_gpu_wait flag means that the allocate BO must be available
immediately and we can't wait for any GPU operation to finish.

v2: squash in mem leak fix, rebase

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: grab the id mgr lock while accessing passid_mapping

Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/SRIOV: Navi12 SRIOV VF doesn't load TOC

In SRIOV case, the autoload sequence is the same

as bare metal, except VF won't load TOC.

Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/SRIOV: Navi10/12 VF doesn't support SMU

In SRIOV case, SMU and powerplay are handled in HV.

VF shouldn't have control over SMU and powerplay.

Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: power up sdma engine when S3 resume back

The sdma_v4 should be ungated when the IP resume back,
otherwise it will hang up and resume time out error.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: For Navi12 SRIOV VF, register mailbox functions

Mailbox functions and interrupts are only for Navi12 VF.

Register functions and irqs during initialization.

Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov: add ring_stop before ring_create in psp v11 code

psp  v11 code missed ring stop in ring create function(VMR)
while psp v3.1 code had the code. This will cause VM destroy1
fail and psp ring create fail.

For SIOV-VF, ring_stop should not be deleted in ring_create
function.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>