From: Viresh Kumar Date: Tue, 12 Mar 2019 04:57:18 +0000 (+0530) Subject: PM / OPP: Update performance state when freq == old_freq X-Git-Tag: v5.1-rc1~29^2^2 X-Git-Url: https://git.kernel.dk/?p=linux-2.6-block.git;a=commitdiff_plain;h=faef080f6db5320011862f7baf1aa66d0851559f PM / OPP: Update performance state when freq == old_freq At boot up, CPUFreq core performs a sanity check to see if the system is running at a frequency defined in the frequency table of the CPU. If so, we try to find a valid frequency (lowest frequency greater than the currently programmed frequency) from the table and set it. When the call reaches dev_pm_opp_set_rate(), it calls _find_freq_ceil(opp_table, &old_freq) to find the previously configured OPP and this call also updates the old_freq. This eventually sets the old_freq == freq (new target requested by cpufreq core) and we skip updating the performance state in this case. Fix this by also updating the performance state when the old_freq == freq. Fixes: ca1b5d77b1c6 ("OPP: Configure all required OPPs") Cc: v5.0 # v5.0 Reported-by: Niklas Cassel Tested-by: Jorge Ramirez-Ortiz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- diff --git a/drivers/opp/core.c b/drivers/opp/core.c index d7f97167cac3..0420f7e8ad5b 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -760,7 +760,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) old_freq, freq); /* Scaling up? Configure required OPPs before frequency */ - if (freq > old_freq) { + if (freq >= old_freq) { ret = _set_required_opps(dev, opp_table, opp); if (ret) goto put_opp;