[linux-2.6-block.git] / arch / arm64 / boot / dts / amlogic / meson-gxbb.dtsi

/*
 * Copyright (c) 2016 Andreas Färber
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>

/ {
	compatible = "amlogic,meson-gxbb";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <0x2>;
		#size-cells = <0x0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x0>;
			enable-method = "psci";
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x1>;
			enable-method = "psci";
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x2>;
			enable-method = "psci";
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x3>;
			enable-method = "psci";
		};
	};

	arm-pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
	};

	xtal: xtal-clk {
		compatible = "fixed-clock";
		clock-frequency = <24000000>;
		clock-output-names = "xtal";
		#clock-cells = <0>;
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		cbus: cbus@c1100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc1100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;

			reset: reset-controller@4404 {
				compatible = "amlogic,meson-gxbb-reset";
				reg = <0x0 0x04404 0x0 0x20>;
				#reset-cells = <1>;
			};

			uart_A: serial@84c0 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x84c0 0x0 0x14>;
				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			uart_B: serial@84dc {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x84dc 0x0 0x14>;
				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			uart_C: serial@8700 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x8700 0x0 0x14>;
				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};
		};

		gic: interrupt-controller@c4301000 {
			compatible = "arm,gic-400";
			reg = <0x0 0xc4301000 0 0x1000>,
			      <0x0 0xc4302000 0 0x2000>,
			      <0x0 0xc4304000 0 0x2000>,
			      <0x0 0xc4306000 0 0x2000>;
			interrupt-controller;
			interrupts = <GIC_PPI 9
				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
			#interrupt-cells = <3>;
			#address-cells = <0>;
		};

		aobus: aobus@c8100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;

			pinctrl_aobus: pinctrl@14 {
				compatible = "amlogic,meson-gxbb-aobus-pinctrl";
				#address-cells = <2>;
				#size-cells = <2>;
				ranges;

				gpio_ao: bank@14 {
					reg = <0x0 0x00014 0x0 0x8>,
					      <0x0 0x0002c 0x0 0x4>,
					      <0x0 0x00024 0x0 0x8>;
					reg-names = "mux", "pull", "gpio";
					gpio-controller;
					#gpio-cells = <2>;
				};

				uart_ao_a_pins: uart_ao_a {
					mux {
						groups = "uart_tx_ao_a", "uart_rx_ao_a";
						function = "uart_ao";
					};
				};
			};

			uart_AO: serial@4c0 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x004c0 0x0 0x14>;
				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};
		};

		periphs: periphs@c8834000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8834000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;

			rng {
				compatible = "amlogic,meson-rng";
				reg = <0x0 0x0 0x0 0x4>;
			};

			pinctrl_periphs: pinctrl@4b0 {
				compatible = "amlogic,meson-gxbb-periphs-pinctrl";
				#address-cells = <2>;
				#size-cells = <2>;
				ranges;

				gpio: bank@4b0 {
					reg = <0x0 0x004b0 0x0 0x28>,
					      <0x0 0x004e8 0x0 0x14>,
					      <0x0 0x00120 0x0 0x14>,
					      <0x0 0x00430 0x0 0x40>;
					reg-names = "mux", "pull", "pull-enable", "gpio";
					gpio-controller;
					#gpio-cells = <2>;
				};

				emmc_pins: emmc {
					mux {
						groups = "emmc_nand_d07",
						       "emmc_cmd",
						       "emmc_clk";
						function = "emmc";
					};
				};

				sdcard_pins: sdcard {
					mux {
						groups = "sdcard_d0",
						       "sdcard_d1",
						       "sdcard_d2",
						       "sdcard_d3",
						       "sdcard_cmd",
						       "sdcard_clk";
						function = "sdcard";
					};
				};

				uart_a_pins: uart_a {
					mux {
						groups = "uart_tx_a",
						       "uart_rx_a";
						function = "uart_a";
					};
				};

				uart_b_pins: uart_b {
					mux {
						groups = "uart_tx_b",
						       "uart_rx_b";
						function = "uart_b";
					};
				};

				uart_c_pins: uart_c {
					mux {
						groups = "uart_tx_c",
						       "uart_rx_c";
						function = "uart_c";
					};
				};

				eth_pins: eth_c {
					mux {
						groups = "eth_mdio",
						       "eth_mdc",
						       "eth_clk_rx_clk",
						       "eth_rx_dv",
						       "eth_rxd0",
						       "eth_rxd1",
						       "eth_rxd2",
						       "eth_rxd3",
						       "eth_rgmii_tx_clk",
						       "eth_tx_en",
						       "eth_txd0",
						       "eth_txd1",
						       "eth_txd2",
						       "eth_txd3";
						function = "eth";
					};
				};
			};
		};

		hiubus: hiubus@c883c000 {
			compatible = "simple-bus";
			reg = <0x0 0xc883c000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;

			clkc: clock-controller@0 {
				compatible = "amlogic,gxbb-clkc";
				#clock-cells = <1>;
				reg = <0x0 0x0 0x0 0x3db>;
			};
		};

		apb: apb@d0000000 {
			compatible = "simple-bus";
			reg = <0x0 0xd0000000 0x0 0x200000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
		};

		ethmac: ethernet@c9410000 {
			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
			reg = <0x0 0xc9410000 0x0 0x10000
			       0x0 0xc8834540 0x0 0x4>;
			interrupts = <0 8 1>;
			interrupt-names = "macirq";
			clocks = <&xtal>;
			clock-names = "stmmaceth";
			phy-mode = "rgmii";
			status = "disabled";
		};
	};
};
Commit	Line	Data
4f24eda8 AF	1	/*
	2	* Copyright (c) 2016 Andreas Färber
	3	*
	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
	8	*
	9	* a) This library is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This library is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* Or, alternatively,
	20	*
	21	* b) Permission is hereby granted, free of charge, to any person
	22	* obtaining a copy of this software and associated documentation
	23	* files (the "Software"), to deal in the Software without
	24	* restriction, including without limitation the rights to use,
	25	* copy, modify, merge, publish, distribute, sublicense, and/or
	26	* sell copies of the Software, and to permit persons to whom the
	27	* Software is furnished to do so, subject to the following
	28	* conditions:
	29	*
	30	* The above copyright notice and this permission notice shall be
	31	* included in all copies or substantial portions of the Software.
	32	*
	33	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	34	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	35	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	36	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	37	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	38	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	39	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	40	* OTHER DEALINGS IN THE SOFTWARE.
	41	*/
	42
	43	#include <dt-bindings/gpio/gpio.h>
	44	#include <dt-bindings/interrupt-controller/irq.h>
	45	#include <dt-bindings/interrupt-controller/arm-gic.h>
f40d437f	46	#include <dt-bindings/gpio/meson-gxbb-gpio.h>
6d1a5c93	47	#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
4f24eda8 AF	48
	49	/ {
	50	compatible = "amlogic,meson-gxbb";
	51	interrupt-parent = <&gic>;
	52	#address-cells = <2>;
	53	#size-cells = <2>;
	54
4f24eda8 AF	55	cpus {
	56	#address-cells = <0x2>;
	57	#size-cells = <0x0>;
	58
	59	cpu0: cpu@0 {
	60	device_type = "cpu";
	61	compatible = "arm,cortex-a53", "arm,armv8";
	62	reg = <0x0 0x0>;
	63	enable-method = "psci";
	64	};
	65
	66	cpu1: cpu@1 {
	67	device_type = "cpu";
	68	compatible = "arm,cortex-a53", "arm,armv8";
	69	reg = <0x0 0x1>;
	70	enable-method = "psci";
	71	};
	72
	73	cpu2: cpu@2 {
	74	device_type = "cpu";
	75	compatible = "arm,cortex-a53", "arm,armv8";
	76	reg = <0x0 0x2>;
	77	enable-method = "psci";
	78	};
	79
	80	cpu3: cpu@3 {
	81	device_type = "cpu";
	82	compatible = "arm,cortex-a53", "arm,armv8";
	83	reg = <0x0 0x3>;
	84	enable-method = "psci";
	85	};
	86	};
	87
	88	arm-pmu {
	89	compatible = "arm,cortex-a53-pmu";
	90	interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
	91	<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
	92	<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
	93	<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
	94	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
	95	};
	96
	97	psci {
	98	compatible = "arm,psci-0.2";
	99	method = "smc";
	100	};
	101
	102	timer {
	103	compatible = "arm,armv8-timer";
	104	interrupts = <GIC_PPI 13
f2a89d3b	105	(GIC_CPU_MASK_RAW(0xff) \| IRQ_TYPE_LEVEL_LOW)>,
4f24eda8	106	<GIC_PPI 14
f2a89d3b	107	(GIC_CPU_MASK_RAW(0xff) \| IRQ_TYPE_LEVEL_LOW)>,
4f24eda8	108	<GIC_PPI 11
f2a89d3b	109	(GIC_CPU_MASK_RAW(0xff) \| IRQ_TYPE_LEVEL_LOW)>,
4f24eda8	110	<GIC_PPI 10
f2a89d3b	111	(GIC_CPU_MASK_RAW(0xff) \| IRQ_TYPE_LEVEL_LOW)>;
4f24eda8 AF	112	};
	113
	114	xtal: xtal-clk {
	115	compatible = "fixed-clock";
	116	clock-frequency = <24000000>;
	117	clock-output-names = "xtal";
	118	#clock-cells = <0>;
	119	};
	120
	121	soc {
	122	compatible = "simple-bus";
	123	#address-cells = <2>;
	124	#size-cells = <2>;
	125	ranges;
	126
	127	cbus: cbus@c1100000 {
	128	compatible = "simple-bus";
	129	reg = <0x0 0xc1100000 0x0 0x100000>;
	130	#address-cells = <2>;
	131	#size-cells = <2>;
	132	ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
	133
6d1a5c93 NA	134	reset: reset-controller@4404 {
	135	compatible = "amlogic,meson-gxbb-reset";
	136	reg = <0x0 0x04404 0x0 0x20>;
	137	#reset-cells = <1>;
	138	};
	139
4f24eda8 AF	140	uart_A: serial@84c0 {
4f24eda8 AF	141	compatible = "amlogic,meson-uart";
8e6320dd	142	reg = <0x0 0x84c0 0x0 0x14>;
4f24eda8 AF	143	interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
	144	clocks = <&xtal>;
	145	status = "disabled";
	146	};
8e6320dd KH	147
	148	uart_B: serial@84dc {
	149	compatible = "amlogic,meson-uart";
	150	reg = <0x0 0x84dc 0x0 0x14>;
	151	interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
	152	clocks = <&xtal>;
	153	status = "disabled";
	154	};
	155
	156	uart_C: serial@8700 {
	157	compatible = "amlogic,meson-uart";
	158	reg = <0x0 0x8700 0x0 0x14>;
	159	interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
	160	clocks = <&xtal>;
	161	status = "disabled";
	162	};
4f24eda8 AF	163	};
	164
	165	gic: interrupt-controller@c4301000 {
	166	compatible = "arm,gic-400";
	167	reg = <0x0 0xc4301000 0 0x1000>,
	168	<0x0 0xc4302000 0 0x2000>,
	169	<0x0 0xc4304000 0 0x2000>,
	170	<0x0 0xc4306000 0 0x2000>;
	171	interrupt-controller;
	172	interrupts = <GIC_PPI 9
	173	(GIC_CPU_MASK_SIMPLE(8) \| IRQ_TYPE_LEVEL_HIGH)>;
	174	#interrupt-cells = <3>;
	175	#address-cells = <0>;
	176	};
	177
	178	aobus: aobus@c8100000 {
	179	compatible = "simple-bus";
	180	reg = <0x0 0xc8100000 0x0 0x100000>;
	181	#address-cells = <2>;
	182	#size-cells = <2>;
	183	ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
	184
f40d437f CC	185	pinctrl_aobus: pinctrl@14 {
	186	compatible = "amlogic,meson-gxbb-aobus-pinctrl";
	187	#address-cells = <2>;
	188	#size-cells = <2>;
	189	ranges;
	190
	191	gpio_ao: bank@14 {
	192	reg = <0x0 0x00014 0x0 0x8>,
	193	<0x0 0x0002c 0x0 0x4>,
	194	<0x0 0x00024 0x0 0x8>;
	195	reg-names = "mux", "pull", "gpio";
	196	gpio-controller;
	197	#gpio-cells = <2>;
	198	};
	199
	200	uart_ao_a_pins: uart_ao_a {
	201	mux {
	202	groups = "uart_tx_ao_a", "uart_rx_ao_a";
	203	function = "uart_ao";
	204	};
	205	};
	206	};
	207
4f24eda8 AF	208	uart_AO: serial@4c0 {
	209	compatible = "amlogic,meson-uart";
	210	reg = <0x0 0x004c0 0x0 0x14>;
	211	interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
	212	clocks = <&xtal>;
	213	status = "disabled";
	214	};
	215	};
	216
fab6b48c CC	217	periphs: periphs@c8834000 {
	218	compatible = "simple-bus";
	219	reg = <0x0 0xc8834000 0x0 0x2000>;
	220	#address-cells = <2>;
	221	#size-cells = <2>;
	222	ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
f40d437f	223
4b7bed38 NA	224	rng {
	225	compatible = "amlogic,meson-rng";
	226	reg = <0x0 0x0 0x0 0x4>;
	227	};
	228
f40d437f CC	229	pinctrl_periphs: pinctrl@4b0 {
	230	compatible = "amlogic,meson-gxbb-periphs-pinctrl";
	231	#address-cells = <2>;
	232	#size-cells = <2>;
	233	ranges;
	234
	235	gpio: bank@4b0 {
	236	reg = <0x0 0x004b0 0x0 0x28>,
	237	<0x0 0x004e8 0x0 0x14>,
	238	<0x0 0x00120 0x0 0x14>,
	239	<0x0 0x00430 0x0 0x40>;
	240	reg-names = "mux", "pull", "pull-enable", "gpio";
	241	gpio-controller;
	242	#gpio-cells = <2>;
	243	};
a8025ed6 KH	244
	245	emmc_pins: emmc {
	246	mux {
	247	groups = "emmc_nand_d07",
	248	"emmc_cmd",
	249	"emmc_clk";
	250	function = "emmc";
	251	};
	252	};
	253
	254	sdcard_pins: sdcard {
	255	mux {
	256	groups = "sdcard_d0",
	257	"sdcard_d1",
	258	"sdcard_d2",
	259	"sdcard_d3",
	260	"sdcard_cmd",
	261	"sdcard_clk";
	262	function = "sdcard";
	263	};
	264	};
8e6320dd KH	265
	266	uart_a_pins: uart_a {
	267	mux {
	268	groups = "uart_tx_a",
	269	"uart_rx_a";
	270	function = "uart_a";
	271	};
	272	};
	273
	274	uart_b_pins: uart_b {
	275	mux {
	276	groups = "uart_tx_b",
	277	"uart_rx_b";
	278	function = "uart_b";
	279	};
	280	};
	281
	282	uart_c_pins: uart_c {
	283	mux {
	284	groups = "uart_tx_c",
	285	"uart_rx_c";
	286	function = "uart_c";
	287	};
	288	};
8c5509f0 KH	289
	290	eth_pins: eth_c {
	291	mux {
	292	groups = "eth_mdio",
	293	"eth_mdc",
	294	"eth_clk_rx_clk",
	295	"eth_rx_dv",
	296	"eth_rxd0",
	297	"eth_rxd1",
	298	"eth_rxd2",
	299	"eth_rxd3",
	300	"eth_rgmii_tx_clk",
	301	"eth_tx_en",
	302	"eth_txd0",
	303	"eth_txd1",
	304	"eth_txd2",
	305	"eth_txd3";
	306	function = "eth";
	307	};
	308	};
f40d437f	309	};
fab6b48c CC	310	};
	311
	312	hiubus: hiubus@c883c000 {
	313	compatible = "simple-bus";
	314	reg = <0x0 0xc883c000 0x0 0x2000>;
	315	#address-cells = <2>;
	316	#size-cells = <2>;
	317	ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
ba6a6c7f MT	318
	319	clkc: clock-controller@0 {
	320	compatible = "amlogic,gxbb-clkc";
	321	#clock-cells = <1>;
	322	reg = <0x0 0x0 0x0 0x3db>;
	323	};
fab6b48c CC	324	};
fab6b48c CC	325
4f24eda8 AF	326	apb: apb@d0000000 {
	327	compatible = "simple-bus";
	328	reg = <0x0 0xd0000000 0x0 0x200000>;
	329	#address-cells = <2>;
	330	#size-cells = <2>;
	331	ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
	332	};
8c5509f0 KH	333
	334	ethmac: ethernet@c9410000 {
	335	compatible = "amlogic,meson6-dwmac", "snps,dwmac";
	336	reg = <0x0 0xc9410000 0x0 0x10000
	337	0x0 0xc8834540 0x0 0x4>;
	338	interrupts = <0 8 1>;
	339	interrupt-names = "macirq";
8d09251a	340	clocks = <&xtal>;
8c5509f0 KH	341	clock-names = "stmmaceth";
	342	phy-mode = "rgmii";
	343	status = "disabled";
	344	};
4f24eda8 AF	345	};
4f24eda8 AF	346	};