.. option:: --aux-path=path
- Use this `path` for fio state generated files.
+ Use the directory specified by `path` for generated state files instead
+ of the current working directory.
Any parameters following the options will be assumed to be job files, unless
they match a job file parameter. Multiple job files can be listed and each job
assigned equally distributed to job clones created by :option:`numjobs` as
long as they are using generated filenames. If specific `filename(s)` are
set fio will use the first listed directory, and thereby matching the
- `filename` semantic which generates a file each clone if not specified, but
- let all clones use the same if set.
+ `filename` semantic (which generates a file for each clone if not
+ specified, but lets all clones use the same file if set).
See the :option:`filename` option for information on how to escape "``:``" and
"``\``" characters within the directory path itself.
+ Note: To control the directory fio will use for internal state files
+ use :option:`--aux-path`.
+
.. option:: filename=str
Fio normally makes up a `filename` based on the job name, thread number, and
.. option:: write_iops_log=str
Same as :option:`write_bw_log`, but writes an IOPS file (e.g.
- :file:`name_iops.x.log`) instead. See :option:`write_bw_log` for
- details about the filename format and `Log File Formats`_ for how data
- is structured within the file.
+ :file:`name_iops.x.log`) instead. Because fio defaults to individual
+ I/O logging, the value entry in the IOPS log will be 1 unless windowed
+ logging (see :option:`log_avg_msec`) has been enabled. See
+ :option:`write_bw_log` for details about the filename format and `Log
+ File Formats`_ for how data is structured within the file.
.. option:: log_avg_msec=int
**2**
I/O is a TRIM
-The entry's *block size* is always in bytes. The *offset* is the offset, in bytes,
-from the start of the file, for that particular I/O. The logging of the offset can be
+The entry's *block size* is always in bytes. The *offset* is the position in bytes
+from the start of the file for that particular I/O. The logging of the offset can be
toggled with :option:`log_offset`.
-Fio defaults to logging every individual I/O. When IOPS are logged for individual
-I/Os the *value* entry will always be 1. If windowed logging is enabled through
-:option:`log_avg_msec`, fio logs the average values over the specified period of time.
-If windowed logging is enabled and :option:`log_max_value` is set, then fio logs
-maximum values in that window instead of averages. Since *data direction*, *block
-size* and *offset* are per-I/O values, if windowed logging is enabled they
-aren't applicable and will be 0.
+Fio defaults to logging every individual I/O but when windowed logging is set
+through :option:`log_avg_msec`, either the average (by default) or the maximum
+(:option:`log_max_value` is set) *value* seen over the specified period of time
+is recorded. Each *data direction* seen within the window period will aggregate
+its values in a separate row. Further, when using windowed logging the *block
+size* and *offset* entries will always contain 0.
Client/Server
-------------
Set this \fIcommand\fR as remote trigger.
.TP
.BI \-\-aux\-path \fR=\fPpath
-Use this \fIpath\fR for fio state generated files.
+Use the directory specified by \fIpath\fP for generated state files instead
+of the current working directory.
.SH "JOB FILE FORMAT"
Any parameters following the options will be assumed to be job files, unless
they match a job file parameter. Multiple job files can be listed and each job
assigned equally distributed to job clones created by \fBnumjobs\fR as
long as they are using generated filenames. If specific \fBfilename\fR(s) are
set fio will use the first listed directory, and thereby matching the
-\fBfilename\fR semantic which generates a file each clone if not specified, but
-let all clones use the same if set.
+\fBfilename\fR semantic (which generates a file for each clone if not
+specified, but lets all clones use the same file if set).
.RS
.P
-See the \fBfilename\fR option for information on how to escape ':' and '\'
+See the \fBfilename\fR option for information on how to escape ':' and '\\'
characters within the directory path itself.
+.P
+Note: To control the directory fio will use for internal state files
+use \fB\-\-aux\-path\fR.
.RE
.TP
.BI filename \fR=\fPstr
explicit size is specified by \fBfilesize\fR.
.RS
.P
-Each colon and backslash in the wanted path must be escaped with a '\'
+Each colon and backslash in the wanted path must be escaped with a '\\'
character. For instance, if the path is `/dev/dsk/foo@3,0:c' then you
would use `filename=/dev/dsk/foo@3,0\\:c' and if the path is
-`F:\\\\filename' then you would use `filename=F\\:\\\\filename'.
+`F:\\filename' then you would use `filename=F\\:\\\\filename'.
.P
-On Windows, disk devices are accessed as `\\\\\\\\.\\\\PhysicalDrive0' for
-the first device, `\\\\\\\\.\\\\PhysicalDrive1' for the second etc.
+On Windows, disk devices are accessed as `\\\\.\\PhysicalDrive0' for
+the first device, `\\\\.\\PhysicalDrive1' for the second etc.
Note: Windows and FreeBSD prevent write access to areas
of the disk containing in\-use data (e.g. filesystems).
.P
.TP
.BI write_iops_log \fR=\fPstr
Same as \fBwrite_bw_log\fR, but writes an IOPS file (e.g.
-`name_iops.x.log') instead. See \fBwrite_bw_log\fR for
-details about the filename format and the \fBLOG FILE FORMATS\fR section for how data
-is structured within the file.
+`name_iops.x.log`) instead. Because fio defaults to individual
+I/O logging, the value entry in the IOPS log will be 1 unless windowed
+logging (see \fBlog_avg_msec\fR) has been enabled. See
+\fBwrite_bw_log\fR for details about the filename format and \fBLOG
+FILE FORMATS\fR for how data is structured within the file.
.TP
.BI log_avg_msec \fR=\fPint
By default, fio will log an entry in the iops, latency, or bw log for every
I/O is a TRIM
.RE
.P
-The entry's `block size' is always in bytes. The `offset' is the offset, in bytes,
-from the start of the file, for that particular I/O. The logging of the offset can be
+The entry's `block size' is always in bytes. The `offset' is the position in bytes
+from the start of the file for that particular I/O. The logging of the offset can be
toggled with \fBlog_offset\fR.
.P
-Fio defaults to logging every individual I/O. When IOPS are logged for individual
-I/Os the `value' entry will always be 1. If windowed logging is enabled through
-\fBlog_avg_msec\fR, fio logs the average values over the specified period of time.
-If windowed logging is enabled and \fBlog_max_value\fR is set, then fio logs
-maximum values in that window instead of averages. Since `data direction', `block size'
-and `offset' are per\-I/O values, if windowed logging is enabled they
-aren't applicable and will be 0.
+Fio defaults to logging every individual I/O but when windowed logging is set
+through \fBlog_avg_msec\fR, either the average (by default) or the maximum
+(\fBlog_max_value\fR is set) `value' seen over the specified period of time
+is recorded. Each `data direction' seen within the window period will aggregate
+its values in a separate row. Further, when using windowed logging the `block
+size' and `offset' entries will always contain 0.
.SH CLIENT / SERVER
Normally fio is invoked as a stand\-alone application on the machine where the
I/O workload should be generated. However, the backend and frontend of fio can
projects / fio.git / commitdiff