See the `examples/' directory for inspiration on how to write job files. Note
the copyright and license requirements currently apply to
`examples/' files.
+
+Note that the maximum length of a line in the job file is 8192 bytes.
.SH "JOB FILE PARAMETERS"
Some parameters take an option of a given type, such as an integer or a
string. Anywhere a numeric value is required, an arithmetic expression may be
Asynchronous read and write using DDN's Infinite Memory Engine (IME). This
engine will try to stack as much IOs as possible by creating requests for IME.
FIO will then decide when to commit these requests.
+.TP
+.B libiscsi
+Read and write iscsi lun with libiscsi.
+.TP
+.B nbd
+Synchronous read and write a Network Block Device (NBD).
.SS "I/O engine specific parameters"
In addition, there are some parameters which are only valid when a specific
\fBioengine\fR is in use. These are used identically to normal parameters,
with the caveat that when used on the command line, they must come after the
\fBioengine\fR that defines them is selected.
.TP
+.BI (io_uring)hipri
+If this option is set, fio will attempt to use polled IO completions. Normal IO
+completions generate interrupts to signal the completion of IO, polled
+completions do not. Hence they are require active reaping by the application.
+The benefits are more efficient IO for high IOPS scenarios, and lower latencies
+for low queue depth IO.
+.TP
+.BI (io_uring)fixedbufs
+If fio is asked to do direct IO, then Linux will map pages for each IO call, and
+release them when IO is done. If this option is set, the pages are pre-mapped
+before IO is started. This eliminates the need to map and release for each IO.
+This is more efficient, and reduces the IO latency as well.
+.TP
+.BI (io_uring)sqthread_poll
+Normally fio will submit IO by issuing a system call to notify the kernel of
+available items in the SQ ring. If this option is set, the act of submitting IO
+will be done by a polling thread in the kernel. This frees up cycles for fio, at
+the cost of using more CPU in the system.
+.TP
+.BI (io_uring)sqthread_poll_cpu
+When `sqthread_poll` is set, this option provides a way to define which CPU
+should be used for the polling thread.
+.TP
.BI (libaio)userspace_reap
Normally, with the libaio engine in use, fio will use the
\fBio_getevents\fR\|(3) system call to reap newly returned events. With
\fBserialize_overlap\fR tells fio to avoid provoking this behavior by explicitly
serializing in-flight I/Os that have a non-zero overlap. Note that setting
this option can reduce both performance and the \fBiodepth\fR achieved.
-Additionally this option does not work when \fBio_submit_mode\fR is set to
-offload. Default: false.
+.RS
+.P
+This option only applies to I/Os issued for a single job except when it is
+enabled along with \fBio_submit_mode\fR=offload. In offload mode, fio
+will check for overlap among all I/Os submitted by offload jobs with \fBserialize_overlap\fR
+enabled.
+.P
+Default: false.
+.RE
.TP
.BI io_submit_mode \fR=\fPstr
This option controls how fio submits the I/O to the I/O engine. The default
device accesses.
.TP
.BI replay_align \fR=\fPint
-Force alignment of I/O offsets and lengths in a trace to this power of 2
-value.
+Force alignment of the byte offsets in a trace to this value. The value
+must be a power of 2.
.TP
.BI replay_scale \fR=\fPint
-Scale sector offsets down by this factor when replaying traces.
+Scale bye offsets down by this factor when replaying traces. Should most
+likely use \fBreplay_align\fR as well.
.SS "Threads, processes and job synchronization"
.TP
.BI replay_skip \fR=\fPstr
data from the rolling collection window. Threshold limits can be expressed
as a fixed value or as a percentage of the mean in the collection window.
.RS
+.P
+When using this feature, most jobs should include the \fBtime_based\fR
+and \fBruntime\fR options or the \fBloops\fR option so that fio does not
+stop running after it has covered the full size of the specified file(s)
+or device(s).
+.RS
.RS
.TP
.B iops
A description of this job goes here.
.fi
.P
-The job description (if provided) follows on a second line.
+The job description (if provided) follows on a second line for terse v2.
+It appears on the same line for other terse versions.
.P
To enable terse output, use the \fB\-\-minimal\fR or
`\-\-output\-format=terse' command line options. The
.nf
terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_min;read_clat_max;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_min;write_clat_max;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
.fi
+.P
+In client/server mode terse output differs from what appears when jobs are run
+locally. Disk utilization data is omitted from the standard terse output and
+for v3 and later appears on its own separate line at the end of each terse
+reporting cycle.
.SH JSON OUTPUT
The \fBjson\fR output format is intended to be both human readable and convenient
for automated parsing. For the most part its sections mirror those of the
/mnt/nfs/fio/192.168.10.121.fileio.tmp
.PD
.RE
+.P
+Terse output in client/server mode will differ slightly from what is produced
+when fio is run in stand-alone mode. See the terse output section for details.
.SH AUTHORS
.B fio
was written by Jens Axboe <axboe@kernel.dk>.
projects / fio.git / blobdiff